SKYLARC'S INDUSTRIAL AND ENGINEERING AUCTION

40' Shipping Container

Skylarc Ref O167903

40' shipping container
One rust spot in roof will need repair but overall a tidy container
Ply floor
Section of box steel mounted on roof
Located Mcleans Island Road
Canterbury local delivery available
Ask a question with location for a price

TOS Universal Milling Machine

Skylarc Ref W168223

Manufacturer TOS Olomouc
Model FU20
1400mm x 300mm table
45 - 1200rpm spindle speeds
NT40 spindle taper
Made in Czechoslovakia
Serial number 3620477
Includes electrical control cabinet
Dividing head and drive components
Milling vise
Change gears
Manuals
Horizontal arbor supports
Accessories included as shown in images
Coolant pump unit
You will need your own lifting equipment to load this machine

Chevalier Teach Lathe

Skylarc Ref Y168225

Chevalier FCL-1860 CNC lathe
Three phase
1400mm between centres
460mm swing over bed
230mm swing over cross slide
56mm spindle bore
Fagor CNC control panel installed.
Maximum speed for 8 inch chuck is 2000 rpm.
Maximum speed for 10 inch chuck is 1800 rpm.
Spindle speed ranges: High 600-2000 rpm, Medium 150-700 rpm, Low 40-200 rpm, Neutral gear.
Gearing and spindle speed chart attached on machine.
Quick change toolpost present.
250mm three jaw chuck
250mm four jaw chuck
Fixed and travelling steadies
Coolant system installed with flexible coolant hose.
Emergency stop controls on both operator and CNC panels.
Serial number X285011.
Manufacturer: Falcon Enterprise Co., Ltd, Taichung, Taiwan.
Has controller fault images of errors attached
Project machine in otherwise tidy condition
You will need your own lifting equipment to load this machine

40' Refrigerated Shipping Container

Skylarc Ref N167902

40' refrigerated shipping container
Faulty refrigeration compressor
Long dent down outside wall
Located Mcleans Island Road
Canterbury local delivery available
Ask a question with location for a price

Stainless Steel Vertical Tank with Cone Bottom

Skylarc Ref O109938

Stainless steel tank with vertical cylindrical body.
Cone bottom outlet design.
Multiple inlet and outlet ports on sides and top.
Equipped with manway on top.
Mounted on four legs with a frame base.
Large hand wheel valve at the bottom outlet.
Internal inspection shows no visible agitator or internal fittings.
Tank features welded construction.
No manufacturer identification visible.
Motor and gearbox assembly mounted separately next to tank.
External connection piping is present.
Interior and exterior surfaces are visible in the provided images.

Industrial Stainless Steel Dewatering Tank with Motorised Conveyor

Skylarc Ref N109937

Stainless steel tank with perforated internal surfaces.
Motorised conveyor installed at one end of the tank.
Conveyor appears to be stainless steel with electrical motor and protective cover.
Tank supported on a heavy-duty steel frame.
Multiple pipe fittings and valves attached for drainage.
External surface of tank shows significant rust on frame and edges.
Perforated base and sides suggest dewatering or solids separation function.
Internal tank surface includes several mounting points for attachments.
Side panels have high visibility hazard striping.

Eurospark 50A EDM Machine

Skylarc Ref Z168226

Eurospark EDM machine
Model type 50A
Manufactured by Agemaspark Ltd
Made in England
430mm x 305mm T slot table
Voltage 220 or 550 volts 50 or 60 Hz
Rated at 5 kVA
Serial number 3913-
Includes a 60 litre drum of EDM fluid labeled as kerosene
System 3R chuck visible on spindle
Handwheels on side for manual adjustment
20870 hours on clock
Mounted on pallet for transport
Physical condition as photographed
No information on included accessories beyond what is shown
Machine was running when removed but hasn't run in several years
Handy sized workshop machine

40' Container Shelter

Skylarc Ref U166661

40' container shelter
Bottom of brackets have been cut off
No mounting bolts
Containers are NOT included
Will be dismantled for collection

Industrial Rotary Drum Mixer with SEW-Eurodrive Motor and Control Panel

Skylarc Ref M109936

Rotary drum mixer on steel frame
Drum constructed from composite or fibreglass material
Large external gear for drum rotation
SEW-Eurodrive K97 DRN100LS4/BE5HF motor and gearbox assembly
Motor power 2.2 kW S1
Motor voltage 230/400V
Motor speed 1450 rpm
Gearbox reduction 96.80 Nm 1400 rpm
Motor efficiency IE3 class
IP66 rated motor
Motor Year 2017
Control panel with Danfoss VLT AutomationDrive
Control panel with multiple selector switches and push buttons
Process automation components visible inside panel
Fitted with ball valve and stainless steel pipework for inlet or outlet
Helical internal spiral for product movement inside drum
Mounted for horizontal operation
Drain or fill port visible on drum side
No further details on capacity or dimensions provided

Hafco Metalmaster EB-260V Bandsaw

Skylarc Ref X168692

Model EB-260V.
Maximum capacity 225mm.
Serial number 201703342.
Manufacture date 03/2017.
Weight 200kg.
Voltage 240V 50Hz single phase.
Main motor power 1.5kW.
Main motor speed 850-2800RPM.
Main motor current 6A.
Coolant pump output 1/8HP.
Coolant pump power 0.1kW.
Coolant pump voltage 240V 50Hz single phase.
Coolant pump RPM 2840.
Bandsaw blade size 2480x27x0.9mm.
Control panel includes emergency stop, start, stop, speed adjustment, and coolant control.
Made in Taiwan.

Genuine Northlands Swamp Kauri Wood, 1850x970x75mm

Skylarc Ref N167096

Genuine Northlands Swamp Kauri Wood.
Measurements approx 1850x970x75mm.
Milling statement No. 7-00-00431

MSA Self Contained Breathing Apparatus Kit

Skylarc Ref J167430

MSA self contained breathing apparatus kit
6.8L composite air cylinder manufactured 07/2022
Cylinder pressure rating: 300 bar, 450 bar test, EN12245 certified, 30 year design life
Backplate labeled as M1 series, serial number 2056192, dated 08/2022
Certified to EN 137:2006 Type 2, BSI and CE0158 marked, compliant with AS/NZS 1716:2012
Includes full face mask (CE 0158, EN136:1998 CL3+) and demand valve
Cylinder gauge and harness included
Protective hard storage/carry case with wheels
Instruction manual and accessory pack included
Components appear unused, visually in excellent condition

Fugi FM-VO-B Vertical Milling Machine

Skylarc Ref R168686

Fugi Vertical Milling Machine
Type FM-VO-B
Serial number 8225
Date of manufacture 1979.8
Made in Taiwan
Induction motor installed
Induction motor type TMEC STM40
Motor phase 3
Motor cycle 50
Motor volt 400
Motor amp 4.60
Motor B.P.M. 1440
Coolant pump included
Coolant pump speed 2850/3450 RPM
Coolant pump manufactured by Chiu Wei Industries Co Ltd Taiwan
Power feed model AL-500S installed
Power feed input AC 110V 90W 50/60Hz
Multiple hand wheels for table tram and adjustment
Mounted on steel drip tray
Mounted on timber pallet

Mettler Toledo IND221 Platform Scale

Skylarc Ref W110258

Mettler Toledo IND221 digital indicator included
Indicator displays weight in kilograms and pounds
Platform dimensions are 1200mm by 1200mm
Platform constructed from checker plate steel
NZ/AU standard mains plug attached
Toltec Scale Limited certificate of accuracy label present
Certificate expiry date on label: 12-6-26
No load cell or capacity information visible

Genuine Black Walnut Slab

Skylarc Ref B167058

Genuine Black Walnut Wood.
Measures approx 2200x1110x85mm.
Partially crated in a protective frame with shrink wrapping. Some wrapping has been removed by us for inspection and auction photos.

Bemato BMT-260S Metal Horizontal Bandsaw

Skylarc Ref Y168693

Model Bemato BMT-260S.
Serial number 07102799.
Voltage is 380V.
Frequency is 50Hz.
Main motor power is 1.1kW.
Total power is 1.19kW.
Three phase power connection.
Blade size is 27mm x 0.9mm x 2460mm.
Blade speed is 72m/min or 36m/min.
Capacity at 90 degrees is 227mm, 220mm, or 260 x 110mm.
Capacity at 45 degrees is 150mm or 145mm.
Capacity at 60 degrees is 90mm or 85mm.
Capacity at 45 degrees (L) is 110mm.
Equipped with a controlled descent lever.
Control panel includes main switch and speed selection.

Kerry's Ltd Double Ended Grinder

Skylarc Ref T168688

Manufactured by Kerry's Ltd Great Britain
Serial number 0SG 12 208
Double ended grinder
Start and stop push button control panel
Fitted with two grinding wheels
Freestanding cast metal pedestal base
Supplied by Kerry's Ltd Stratford London E15 England
Mains power cable is present but wires are disconnected
Model number or motor specifications not visible

Rank Taylor Hobson Engraving Machine Type D No. 852

Skylarc Ref S168687

Made in England by The Rank Organisation Rank Taylor Hobson Division Leicester
Type D No. 852
Engraving machine
Cutter spindle speeds range from 2730 to 18000 RPM
Lancashire Dynamo and Crypto motor
Motor specification: 0.16 HP 230V 2850 RPM 50Hz
Auto-Memota relay present
Relay rated for 230-250V 50 cycles
Mounted on cast iron base
Equipped with table and control levers
Includes motor wiring and attached electrical box
Single phase

Draper MBS46A Metal Bandsaw

Skylarc Ref R168400

Model MBS46A
Stock number 30736
Motor power 0.5 horsepower
Power supply 240 volts
Cutting capacity 4.5 inch round
Cutting capacity 4 x 6 inch rectangular
Blade length 64.5 inches
Speed settings 65 95 165 rpm
Induction motor rated at 1420 rpm
Single phase operation
Motor current 3-5 amps
Class E motor insulation
Suitable for metal cutting tasks
Includes integrated stand and vice
Sticky start/stop button

AVYAC C222 Manual Grinding Machine

Skylarc Ref V168690

Manufacturer AVYAC
Model C222
Serial number 93208
Power 0.8 kW
Voltage 220V
Frequency 50 Hz
Weight 160 kg
Manufacture date 9 January 1988
Manual grinding machine
For drill diameters 2 to 26 mm
Includes chuck and grinding wheel
Supplied by MacDonald Machinery Auckland
Manual documentation included
Additional metal parts included
Loose power cable present

Herbert Metal Master GH-40 Geared Head Drilling and Milling Machine

Skylarc Ref U168689

Herbert Metal Master GH-40 Geared Head Drilling and Milling Machine
Spindle speeds selectable from 95 to 1970 rpm depending on setting
Spindle speed chart provided on the front panel
Capable of drilling capacity up to 32 mm
Capable of face milling up to 80 mm
End milling capacity up to 28 mm
Manual controls for head adjustment and table movement
Handwheels with graduated dials for precise movement
Slotted work table with T-slots for clamping
Mounted on a metal stand
Fitted with New Zealand standard 3-pin plug
Serial number 200045

BNT Air Compressor 3.0HP 180L Model TB-300600A

Skylarc Ref N168682

BNT Air Compressor with 3.0 horsepower motor
Model TB-300600A
Voltage 230V
Frequency 50Hz
Maximum pressure 8.8 bar
Tank capacity 180 litres
Air delivery rate 480 litres per minute
Rated RPM 2850
Tank manufactured by EMAX Power (Shanghai) Co. Ltd
Tank built to AS1210:2010 Class 3 standard
Tank material JIS SS34
Design pressure 900 kPa
Working pressure 800 kPa
Testing pressure 1287 kPa
Hydrostatic test date 08/2016
Temperature range 0 to 150 degrees Celsius
Serial number TB806201407

Stainless Steel Filter Sheets

Skylarc Ref A110236

Stainless steel filter sheets.
Approximately 40 sheets stacked on a pallet.
Each sheet has a rectangular shape with a rubber seal around the inner edge.
Sheets feature multiple perforations for filtration purposes.
All sheets appear to be the same design and size.
Material is stainless steel throughout.
Exact measurements and model are not specified.

Jingjin Filter Press Model XG10/630-U

Skylarc Ref K109934

Manufacturer Jingjin Environmental Protection Inc.
Model XG10/630-U
Plate quantity 17 pcs
Filtration area 10 square meters
Hydraulic pressing pressure 13 MPa
Filtration pressure 0.6 MPa
Squeezing pressure 1.2 MPa
Anchor hole spacing 2050 mm
Control panel with emergency stop power start stop and other labeled controls
Includes filter plates and associated piping
Base frame with integrated hydraulic power unit
Feeding pump installed and connected
Safety operation instructions attached in English and Chinese
Serial number 201340706

Laguna 18BX Single Phase Bandsaw

Skylarc Ref V167208

Laguna 18BX Single Phase Bandsaw.
Model No.mbsnd 18bx-2203
Manufactured in 2022.
Single phase 16A plug.
Blade sizes from 3-30mm x 3651-3696mm
186kg weight.
Saw shows light use.
https://lagunatools.com/classic/bandsaws/18bx/?srsltid=AfmBOooftZib7NLaAiAobIor9zRNg9LtpgF82paQgD-M-RG-Qt7Va7o_

Alcatel-Lucent Mass Flow Controller MC-20SLPM

Skylarc Ref N167408

Alicat Scientific Mass Flow Controller, Model MC-20SLPM-D-25BSPP
0–20 SLPM range, with digital display
1/4" British Standard Pipe Parallel (BSPP) connections
For Oxygen (O2), 5IN, 5M configuration
Manufactured June 2024, Serial Number 489625
Includes factory calibration certificate (calibrated 21/06/2024)
Accuracy ±0.6% of reading or ±0.1% full scale
Pressure range: up to 160 PSIA, Temp accuracy: ±0.75°C
Included: USB-MD8-232 USB to 8-pin mini DIN, 6' RS232 cable, accessories as pictured
New, unused, sealed in original packaging

RS Pro RS-96 Air Quality Meter for Humidity

Skylarc Ref I167429

RS Pro RS-96 Air Quality Meter for Humidity and particle detection
Measures PM2.5 and PM10 particle sizes with real-time display
Integrated temperature and relative humidity sensor
Clear colour LCD screen for easy readings
User-friendly interface with dedicated buttons for power, memory, settings, and measurement
Portable handheld design with stand and belt clip for versatile use
Condition: Very light signs of usage, overall excellent
For full specifications see manufacturer link: https://nz.rs-online.com/web/p/air-quality-monitors/1558903

TSi IAQ-CALC 7515 Indoor Air Quality Meter

Skylarc Ref H167428

TSI IAQ-CALC 7515 Indoor Air Quality Meter for measuring CO2 concentration in indoor environments
Made in USA by TSI Incorporated
Large easy-to-read display
Uses 4x AA batteries (not included)
Protective carry case with foam cutout included
Comes with operation and service manual
Accessory probe included as shown
Calibration date: March 2023
Good condition with some minor exterior marks
Model, serial, and revision info displayed and verified
Full manufacturer specs: https://tsi.com/products/indoor-air-quality-meters-instruments/indoor-air-quality-meters/iaq-calc-indoor-air-quality-meters-7515

Hitachi 2 Ton Electric Chain Hoist Type 2SH

Skylarc Ref U168611

Hitachi electric chain hoist
Model Type 2SH
Rated capacity 2 ton
Lifting height 6 metres
Weight 59kg
Hoisting speed 2.3 metres per minute on 50Hz
Hoisting speed 2.8 metres per minute on 60Hz
Motor is 3 phase two pole
Voltage options 220V 380V 415V
Rated current 3.8A at 220V 2.2A at 380V and 415V
Insulation class E
Limit switch specification 600V 17A 50/60Hz
Manufactured by Hitachi Ltd Tokyo Japan
Pendant control attached
Fitted with industrial power plug
Includes trolley assembly

Kawasaki 3/4" Drive Air Imoact Wrench KPT-285P

Skylarc Ref U167051

Kawasaki 3/4" Drive Air Imoact Wrench.
Model KPT-285P.
Includes33mm and 41mm sockets.
Protective Rubber jacket on Wrench body.

Aeroqual Ranger Air Quality Handheld Monitor

Skylarc Ref G167427

Aeroqual Ranger Air Quality Handheld Monitor.
Made in New Zealand.
Includes Sensor attachment CH4 0-10000 ppm 0112222-004
Includes USB-C charger.
https://www.aeroqual.com/products/ranger-portable-air-monitor/ranger-portable-air-quality-monitor

Aeroqual Series 500 Portable Air Quality Monitor

Skylarc Ref F167426

Aeroqual Series 500 Portable Air Quality Monitor S500 V6.7 with lithium battery
Includes Aeroqual END NO2 0-1ppm sensor module (in packaging)
Includes Aeroqual EOZ O3 0-10ppm sensor module
Includes power supply (AU/NZ plug), USB cable, and RS232 cable
Monitor operates, but accuracy not verified
Sensors made in New Zealand
Digital display with user controls
Ports: RS232, 12V DC input, and RJ45
For full specifications, see manufacturer website: https://www.aeroqual.com/s-series-portable-air-monitors/series-500-portable-air-pollution-monitor
Box and manuals included

Kincrome Blue Steel Mobile Tool Trolley Cabinet

Skylarc Ref B167422

Kincrome Blue Steel Mobile Tool Trolley Cabinet complete with 6 lockable drawers and keys included
Durable blue powder coat finish with chrome handles
Heavy-duty castor wheels for easy movement and repositioning
Large side handle for convenient mobility around your workshop
Top mat included for secure tool placement on work surface
Supplied with a selection of assorted hand tools, socket set, pliers, screwdrivers, hex keys and more as shown
Drawers are lined to protect tools and reduce noise
Both cabinet and included tools are in excellent condition
Ideal for workshop, trade, or garage use

Ajax Radial Arm Drill

Skylarc Ref D167242

Ajax Radial Arm Drill.
Made in England.
Type No.16641
Age unknown.
32A 3-phase plug.
Material mounting block approx 610x455x450mm.
Vertical height range 1200mm.
Drill swing approx 900mm
Morse Taper No.4 Chuck.

Kerastase Nutritive Assorted Haircare Masques, Serums

Skylarc Ref O166135

Kerastase Nutritive Assorted Haircare Masques, Serums.
Includes:
2x Kerastase Nutritive Masquintense 200ml.
4x Kerastase Nutritive Nutri-Supplement Scalp Serum 90ml.
2x Kerastase Nutritive Nutri-Supplement Split Ends Serum 50ml.
All are new in sealed packaging.

Genuine Kauri Wood Table Top w/ Resin Coating, Unfinished

Skylarc Ref G167089

Genuine Northlands Kauri Wood Table Top w/ Resin Coating, Unfinished.
Measures approx 2035x950x85mm.
Note that the Resin Coating has not been sanded smooth, buyer will need to finish.
Milling statement No. 7-00-00431

Multicomp Pro MP710086 Linear Benchtop DC Power Supply

Skylarc Ref E167425

Multicomp Pro MP710086 Linear Benchtop DC Power Supply
Output range: 0-30V / 0-5A with digital display for voltage, current, and power
Compact benchtop design, dimensions: 280x110x190mm
Front panel with clear LCD display, intuitive controls, and banana plug outputs
Memory, system, and keylock functions for convenience and safety
Rear panel features USB and RS-232 ports for remote control/monitoring
Input: 100-120V AC (F5A fuse) or 200-240V AC (F3A fuse), 50-60Hz, 300W/400VA max
Supplied with power cord, original user manual, and installation CD-ROM
Near new condition, shows no obvious signs of use

Multicomp Pro MP710086 Linear Benchtop DC Power Supply

Skylarc Ref D167424

Multicomp Pro MP710086 Linear Benchtop DC Power Supply
Output range: 0-30V / 0-5A with digital display for voltage, current, and power
Compact benchtop design, dimensions: 280x110x190mm
Front panel with clear LCD display, intuitive controls, and banana plug outputs
Memory, system, and keylock functions for convenience and safety
Rear panel features USB and RS-232 ports for remote control/monitoring
Input: 100-120V AC (F5A fuse) or 200-240V AC (F3A fuse), 50-60Hz, 300W/400VA max
Supplied with power cord, original user manual, and installation CD-ROM
Near new condition, shows no obvious signs of use

BraunAbility Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref K168653

BraunAbility Wheelchair Hoist.
Model number L9181B3351RP-2TC.
Serial number 17052500971.
Manufacture date 25 May 2017.
Max lifting capacity 363 kg.
Power supply required 70 amp max load current.
Emergency stop button located on the main control box.
Hand control with coiled cable attached.
Safety barriers with green and yellow protective coating.
Mesh platform with yellow edge markings.
Supplied with an instruction CD.
Service completed on 15 April 2024.
Next service due 15 October 2025.
Safe working load sticker present on frame.
All labels and service records visible on unit.

BraunAbility Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref J168652

Manufacturer BraunAbility
Model number L9181B3351RP-2TC
Serial number 15111600384
Manufacture date 11/16/2015
Maximum lifting capacity 800lb
Maximum lifting capacity 363kg
Includes mesh platform and safety handrails
Emergency stop button present
Operational control panel with up and down switch
Electric lift with current draw listed as 70 Amps Max
Located on lift structure are usage instruction labels

BraunAbility Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref I168651

BraunAbility wheelchair hoist
Model number L918IB3351RP-2TC
Manufactured 16 September 2015
Maximum lifting capacity 800 lb
Maximum lifting capacity 363 kg
Full load current 70 amp max
Emergency stop button present
Handheld control unit with up down and tilt functions included
Mesh platform with yellow safety edges and green handles
Serviced on 19 April 2024
Next service due 9 October 2024
Serial number 15091600350

Braun Millennium Series Wheelchair Hoist L918IBTC

Skylarc Ref H168650

Braun Millennium Series Wheelchair Hoist.
Model L918IBTC.
Manufactured by The Braun Corporation.
Maximum lifting capacity is 800 lb or 363 kg.
Serial number is 14-02545.
Manufacture date is 09/13/2011.
Electric powered system.
Platform features a black metal mesh design.
Green and yellow safety rails on both sides.
Hale Manufacturing Christchurch service label present.
Service record indicates last service on 4/2/25.
Next service due 4/8/25.
Includes visible wiring and connection ports.

BraunAbility Wheelchair Hoist L918IB3351RP-2TC

Skylarc Ref G168649

BraunAbility wheelchair hoist.
Model number L918IB3351RP-2TC.
Maximum lifting capacity 800 lb.
Manufacture date 1/3/2017.
Last serviced 15/5/2024.
Next service due 15/11/2024.
Manufactured in Indiana, USA.
Full load current 70 amp max.
Includes attached control box with emergency stop button.
Push button hand remote with four-way directional controls included.
Frame and platform constructed with black and yellow highlighted steel components.
Mesh platform design.
Handles are coated green and yellow for visibility.

Stainless Steel Platform with Steps and Railing

Skylarc Ref B168644

Stainless steel construction.
Top platform size is 850mm by 700mm.
Platform accessed by six perforated non-slip steps.
Handrails on both sides of steps and around platform.
Railing height is 1000mm from base.
Raised black plastic bin attached to one side of platform.
Platform supported by four vertical legs.
Yellow grip strips present on each step and entry to platform.

Braun Wheelchair Hoist Model L9181B3351RP-2TC

Skylarc Ref F168648

Manufacturer is The Braun Corporation Indiana USA.
Model number is L9181B3351RP-2TC.
Manufacture date is 19 March 2018.
Maximum lifting capacity is 800 lb or 363 kg.
Serial number is 18031901230.
Full load current 70 amp max.
Equipped with a mesh platform and handrails.
Features an emergency stop button on the control box.
Designed for wheelchair lifting applications.
Product label identifies it as a Braun Wheelchair Hoist.

BraunAbility Wheelchair Lift L9181B3351RP-2TC

Skylarc Ref E168647

Manufacturer is BraunAbility.
Model number is L9181B3351RP-2TC.
Manufacture date is 1/3/2017.
Lifting capacity is 800 lb or 363 kg.
Full load current is 70 Amp max.
Emergency stop button included.
Handheld control with buttons for functions F UNF U D.
Mesh platform and safety rails present.
Serial number 17010300839.

Braun Wheelchair Lift

Skylarc Ref C168645

Braun Wheelchair Lift unit
Mesh steel platform with yellow safety markings
Green and yellow handrails on both sides
Control box with emergency stop button
Electric powered operation
Label indicates recent hoist service and safety check on 16-02-2024
Next service due 16-02-2025
Mounted on a wooden pallet
Visible Braun Wheelchair Lift branding on side
Manufacturer or further specifications not stated

BraunAbility Wheelchair Lift L918IB3351RP-2TC

Skylarc Ref D168646

Manufacturer is The Braun Corporation.
Model number L918IB3351RP-2TC.
Manufacture date is 8/7/2017.
Maximum lifting capacity is 800 lbs.
Maximum lifting capacity is 363 kg.
Full load current is 70 amps max.
Emergency stop button control is present.
Serial number is 17080701039.
BraunAbility branding on side panel.
Lift base and mesh platform construction.
Electrical warning symbol present on control box.

DMS Italia 1200 300 Industrial Screw Conveyor

Skylarc Ref X168640

Manufacturer DMS Italia srl
Machine type 1200 300
Serial number 1200 300 2097
Constructed primarily from stainless steel
Fitted with an industrial auger screw mechanism
Equipped with an electric motor drive unit
Features large intake hopper and curved pipe outlet
Mounted on a steel frame base
Nameplate indicates origin in Arzignano Italy
Includes access hatches and pipe connection points
Suitable for use in industrial material handling applications
No further accessories or control panels visible

Stainless Steel Tank 1200mm Diameter 1400mm Tall

Skylarc Ref K110220

Stainless steel tank.
Diameter is 1200mm.
Height is 1400mm.
Cylindrical design.
Mounted on a tubular steel frame.
Equipped with bottom outlet pipes and flanges.
Internal view shows heating or cooling coils attached to the interior walls.
Multiple pipe fittings at the base of the tank.
Tank is open at the top with a removable cover visible.

Electric Hydraulic Power Pack Unit

Skylarc Ref B110211

Electric hydraulic power pack unit.
White painted steel reservoir tank.
Includes electric motor mounted on top of the tank.
Power cable fitted with a 5-pin industrial plug.
Two hydraulic hoses connected to pump and valve manifold.
Bucket shown contains hoses and valve components.
Oil level sight glass fitted to tank side.
Includes pressure gauge on tank top.
External filter element attached on side of tank.
Visible rust on tank surfaces and mounting feet.
No manufacturer labels or model numbers visible.

Loma Systems IQ2 Metal Detector

Skylarc Ref C109900

Loma Systems IQ2 metal detector unit
Stainless steel construction
Rectangular inspection aperture
Digital control panel with display and keypad
Model identified as IQ2 from Loma Systems
Wired signal lamp attached
Unit has exposed wiring harness
Inspection Systems NZ service sticker attached
Label with 24 hour support number visible
Power and control wiring visible on left side
No conveyor or transport mechanism included
No additional accessories included

Roller Conveyor Sections 14 Pieces

Skylarc Ref F168622

Thirteen roller sections measure 2400mm x 350mm each.
One roller section measures 1444mm x 350mm.
Fourteen roller conveyor sections total.
Steel frames with green cylindrical rollers.
Rollers mounted in parallel within frame.
Roller sections appear stackable for transport.

Steel Acrow Props Assorted Lengths

Skylarc Ref C168619

Lot of 6 steel acrow props.
4 props are 2000mm in length.
2 props are 3200mm in length.
Each prop is fitted with square base and top plates.
All props have adjustable screw mechanisms.
Finish is galvanised steel.
Pins included for each prop.

Miller Deltaweld 402 Welder w/ 60 Series Wire Feeder

Skylarc Ref L168342

Miller Deltaweld 402 Welder.
3-phase.
Invludes 60 Series Wire Feeder.
Includes attached cables, hoses, torch tool.
System is mounted on a mobile Trolley Cart.
Tyres on cart are low on air pressure.

IBC 1000L Plastic Water Storage Tanks

Skylarc Ref C109926

IBC tanks with plastic inner containers and metal cage exteriors
Approximate capacity 1000 litres per tank
Fitted with top fill caps
Fitted with bottom drain valves
Mounted on plastic pallets for handling
Suitable for water storage or other liquid containment
Multiple units shown in the images
Condition and previous use unknown

Pallet Racking Shelf Assembly.

Skylarc Ref Y168329

Pallet Racking Shelf Assembly.
Includes the following components:
3x 910x90x2130mm galvanised steel vertical frames.
16x 1830x45x55mm orange horizontal beams.
There are no Shelving boards included.

Woodpeckers Autoscale Miter Sled Left

Skylarc Ref D167190

Leaf-spring miter bar fits perfectly in time-worn or poorly-machined miter slots.
Fence adjusts automatically to keep the length scale accurate at any angle setting.
Large, laser-engraved protractor adjusts to 60°; graduated in half-degrees.
Positive stops for 3,4,5,6,8 and 12 sided miters.
Micro-adjustable flip-stop won’t lift out of position.
Extendable fence carries the stop out to 50"
Phenolic table is impervious to changes in temperature or humidity.

https://www.woodpeck.com/autoscale-miter-sled.html

L-Shaped Desk and Chair

Skylarc Ref H168572

L-shaped corner office desk with matching gaming/office chair included
Desk dimensions: 2100mm x 2000mm, height 730mm
Each side width: 800mm
Desk features cable management holes and sturdy metal legs
Spacious white worktop with chamfered inner corner for comfortable seating
Chair is blue/black, height adjustable, with arm rests and lumbar support cushions
Chair has five-wheel base and ergonomic back support
Ideal workstation for office, home, or gaming setup
Condition presents minor marks and signs of use, structurally solid

Warehouse Shelving

Skylarc Ref X167990

Heavy duty steel shelving unit with 4 adjustable height shelves
Suitable for garage, workshop, or warehouse storage
All-steel construction for durability and strength
Shelves can be repositioned to accommodate various storage needs
Approximate external dimensions: 2m wide x 600mm deep x 2m high
Grey shelves with a black powder-coated steel frame
Some cosmetic wear and paint chipping visible from regular use
Boltless assembly design for easy setup and adjustment

Stainless Steel Divided Tank

Skylarc Ref A168643

Overall tank size is 1400mm x 2400mm x 1300mm
Each side measures 660mm x 2400mm x 1300mm
Stainless steel construction
Two separate internal compartments
Multiple threaded pipe connections on both ends
Mounted on steel legs with base plates
Rectangular open top design
Internal divider panel runs lengthwise
Surface shows visible signs of previous use
No visible manufacturer's markings

Industrial Access Platform with Stairs and Railings

Skylarc Ref Z168642

Top platform measures 2200mm x 1070mm
Railing height is 1000mm
Structure includes one access stairways
Stair treads and platform surfaces are yellow grating
Frame constructed from metal
Integrated handrails on both sides of each walkway
Includes fixed support legs with plate bases
One side contains attached electrical wiring and a control box

Large Industrial Electric Motor

Skylarc Ref B110237

Large industrial electric motor shown mounted on a pallet
External junction box attached to the side
Ventilated end bell with lifting eye on top
Coupling attached to the drive shaft
Significant visible rust on exterior surfaces
Finned body housing for cooling
Flange mounting configuration
No manufacturer label or technical specifications visible
Wiring glands present on junction box
No cables or wiring supplied

Stainless Steel Cylinder Tank with Fittings and Pipe

Skylarc Ref Q110226

Stainless steel cylindrical tank
Vertical orientation
Pipe fitting on top
Multiple side fittings and valves
One large round inspection or access port
Horizontal outlet valve with blue handle
Significant weld seams visible
Removable top pipe extends vertically
Tank appears insulated along one segment
No identification labels visible
Dimensions and capacity not specified
No electrical connections apparent
No manufacturer markings visible

SEW-EURODRIVE DRN100LS4/BE5HF/FG Electric Motor with Gearbox

Skylarc Ref D110213

SEW-EURODRIVE electric motor with attached gearbox.
Model DRN100LS4/BE5HF/FG.
Rated power 2.2 kW S1.
Rated current 230/400 V Delta/Star.
Inverter duty VPWM 3~ IEC60034.
Frequency 50 Hz.
Rated speed 1450 rpm.
Thermal class 155(F).
Efficiency at 100 percent load 86.9 percent.
Efficiency at 75 percent load 87.5 percent.
Efficiency at 50 percent load 86.4 percent.
Protection rating IP66.
Cos phi 0.76.
IE3 classification.
Year of manufacture 2018.
Gearbox attached with large output gear.
Mounting base with slots for fastening.
Wiring is present but cut at ends.
Total weight marked on motor plate 37.928 kg.
Gearbox and motor casing appear to be cast metal construction.

Pair of Metal Machine Saddles

Skylarc Ref G168623

Pair of heavy-duty metal machine saddles shown on pallet
Welded and bolted steel construction
Rust present on exterior surfaces
Large central opening with semi-circular cutout on each saddle
Rectangular mounting plates with bolt holes on ends
One saddle includes a cast iron clamping or support fixture
Overall length of each saddle approximately equal to pallet width
No manufacturer or model information visible
No additional accessories or parts included

Steel Fabricated Lifting Attachment

Skylarc Ref E168621

Steel rectangular tube construction.
Two parallel base beams with welded cross member.
Central extending arm with welded gusset reinforcement.
Two large adjustment screws with knurled round handles at base ends.
Lifting shackle attached to end of main arm.
Welded assembly throughout.
No brand or model identifiable.
Finish is raw or lightly brushed steel.

WEG W22 Electric Motor and Renold PH160 Gearbox

Skylarc Ref A168617

WEG W22 High Efficiency electric motor.
Motor model: 3~132S.
IP66 rated.
Motor power: 5.5kW.
Motor voltage: 380-415V or 660-690V (Y/D configuration).
Motor speed: 1460 RPM at 50Hz.
Motor efficiency: 90.9% (NEMA EFF).
Motor weight: 89kg.
Gearbox: Renold PH160.
Gearbox ratio: 63.1:1.
Gearbox serial number: 8273.
Gearbox supplied and serviced by Renold New Zealand Ltd.
Gearbox uses Mobil SHC 632 gear oil.
Electrical cable fitted with multipin industrial plug.

Pentair Jung Pumpen MultiStream-Pumpe 300/2 B6

Skylarc Ref Y168615

Brand: Pentair Jung Pumpen
Model: MultiStream-Pumpe 300/2 B6
Serial Number: JP00471
Pump type shown as centrifugal on casting
Electric motor attached
GR Spa motor code: XE2004.01
GR Spa motor rated 400/440V
Motor 50/60Hz 0.56A
Motor speed 2320/2520 rpm
Class IP55
HYDAC heat exchanger/cooler included
Power cable with attached connector included
Wiring tails supplied in plastic bag
Made in Germany (pump)
GR Spa motor made in Italy

Weg W22 3kW Electric Motor with Progressive Cavity Pump

Skylarc Ref Y110000

Weg W22 electric motor
Model 13118610X03
3.0kW rated power
Y connection for 380V 50Hz draws 6.26A at 1430rpm
Star connection for 400V 50Hz draws 6.07A at 1445rpm
Star connection for 415V 50Hz draws 5.79A at 1445rpm
Star connection for 460V 60Hz draws 5.33A at 1740rpm
IP66 rated enclosure
Insulation class H
IE3 efficiency class
Mounted to a progressive cavity pump
Pump has stainless steel construction sections and blue painted barrel
Mounted on a stainless steel frame with four caster wheels
Electrical connection is visible
Pump inlet and outlet are visible and appear to have hygienic fittings
Motor manufactured in Brazil

3-Phase 32A Power Lead Cable, 20-Metre Length

Skylarc Ref D168334

3-Phase 32A Power Lead Cable.
20-Metre Length.
Aflex HDX 4x2.5mm² 0.6/1kV X90 cable.

RXP RX Plastics Chemical Storage Tank 1154GAL

Skylarc Ref J109933

Manufacturer is RX Plastics Ltd.
Location listed as Ashburton.
Certified as a chemical storage tank.
Design service temperature is 23 degrees Celsius.
Tank design specific gravity is 2.0.
Maximum design pressure is 10.3 kPa.
Maximum service life is 10 years.
Chemical reduction factor is 1.1.
Certified to AS/NZS 4766.
Compliant with HSNO COP12.
Indoor or outdoor use allowed.
Vent fittings visible in the lid and side of the tank.
Plastic construction with a removable screw top lid.
The tank has a visible manufacturer's compliance label.
Tank appears to be cylindrical with a flat base.

Stainless Steel Storage Tank

Skylarc Ref L109935

Stainless steel cylindrical storage tank
Mounted on four tubular steel legs
Fitted with bottom outlet valve
Several fittings and nozzles visible on top lid
Approximate dimensions and volume are not specified
Condition consistent with outdoor storage
No manufacturer markings visible in provided images

Pallet Racking Shelf Assembly

Skylarc Ref Z168330

Pallet Racking Shelf Assembly.
Includes the following components:
2x 900x90x1800mm galvanised vertical frames.
4x 1800x50x45mm orange horizontal beams.
Shelving boards not included.
Some rusting to orange beams.

Bulk Lot White Woven Polypropylene Bags on Pallets

Skylarc Ref X167262

Bulk lot of white woven polypropylene bags.
Bags are stacked on multiple pallets.
Included are cardboard boxes containing additional material.
Pallets and bags are wrapped with clear plastic sheet.
Loose flat panels are visible among the stack.
Number and exact size of bags is not specified.
Bags appear to have blue stitching.
Location is an indoor warehouse setting.
Contents are as shown in the images.

Raspberry Pi 4 Model B Computers w/ Accessories

Skylarc Ref V167416

4x Raspberry Pi 4 Model B mini computers, each with 64-bit quad-core Cortex-A72 processor and 4GB LPDDR4 RAM
Each board includes: 2 micro HDMI ports (supports up to 4Kp60), 2 USB 3.0 ports, 2 USB 2.0 ports, Gigabit Ethernet, Bluetooth 5.0, Wi-Fi 802.11b/g/n/ac
Advanced Edition Pack with 3x empty official cases (black/grey), 1x official HDMI cable, 1x official USB-C cable
All items appear unused, with one box opened only for photos
PoE-capable (requires PoE HAT, not included)
Made in the UK
5V/3A USB-C power supply required (not included)

Click Portable Air Conditioner

Skylarc Ref Q167411

Click Portable Air Conditioner, model CPAC1907-C
Manufactured 06/2023
Cooling capacity: 7000 BTU (2.06kW)
Rated power input: 792W
Air flow: 300m³/h
Max dehumidifying capacity: 1.5L/h
Operates in cool, dehumidify, and fan modes with sleep and timer functions
Digital control panel with LED display, adjustable fan speed
Uses R290 refrigerant, 130g charge
Noise level: ≤65dB(A)
AC power supply: 220-240V~50Hz
Remote and venting/drainage accessories not included
Some cosmetic marks present but unit operates normally

Sensirion Mass Flow Controller Kit SFC5500

Skylarc Ref E167009

Sensirion Mass Flow Controller Evaluation Kit
Model: SFC5500-10slm, Multigas
Includes mass flow controller, power adapter, data/USB cable, and original box
Comes with SFC5xxx series quick start guide
RS485/IO Link/CAN connectivity options
Serial No. 23010169, Ref. conditions: 20°C, 1013 mbar
Visible protective cap still installed on inlet/outlet
Sensor condition appears unused
Registration date on box: 26.09.2023
Suitable for gas flow measurements and control applications

Redken All Soft Heavy Cream & Argan-6 Oil

Skylarc Ref B166200

Redken All Soft Heavy Cream & Argan-6 Oil.
Includes:
2x Redken All Soft Heavy Cream treatment tubes are 250 ml each.
3x Redken All Soft Argan-6 Oil bottles are 111 ml each.

Grundfos Electric Pump LCR 30-8 BE.2CS

Skylarc Ref R168348

Brand: Grundfos
Model: LCR 30-8 BE.2CS
Motor protection class IP55
Weight 43kg
Rated voltage 380-415V
Current 11.2A
Maximum current 12.4A
Speed range 2910-2930rpm
Frequency 50Hz
Made in Hungary
Three-phase power supply required.

Cafe / Restaurant Bench Seat Sections

Skylarc Ref R109941

Cafe / Restaurant Bench Seat Sections.
Padded olive green vinyl seat and back sections.
Seat depths of approx 660mm.
Back heights approx 660mm.
Seat Lengths include:
2x 2100mm square corners
2x 2060mm with 45⁰ angle corner.
2x 1730mm with 45⁰ angle corner
Auction includes 6x back/seat panels sections in auction.
Each section shows generally mild usage, see photos.

Siruba 767Qe Industrial Overlocker Sewing Machine

Skylarc Ref G110112

Siruba 767Qe industrial overlocker sewing machine
Mounted on rolling metal table with foot pedal
Model 767Qe visible on front
Made by Kaulin MFG Co. Ltd
SPEC 516M2-524
Supplied by Sewingtime (NZ) Ltd
Includes multiple thread spool holders
Electrical safety tag visible on power cord
Fitted with industrial power plug
Table contains integrated measuring ruler
Includes thread guides and tension knobs
Red emergency stop button installed
Threaded and ready for use

Kerastase Paris Chromologiste Shampoo, Masque, & Blow Dry Set

Skylarc Ref O168449

Kerastase Paris Chromologiste Shampoo, Masque, & Blow Dry Care Set.
Régénérant youth revitalizing shampoo 250 ml
Kérastase Paris Chronologiste Masque Intense Régénérant youth revitalizing hair masque 200 ml.
Kérastase Paris Chronologiste Thermique Régénérant youth revitalizing blow-dry care 150 ml.
Infused with Abyssine and Hyaluronic Acid.
Shampoo is formulated for hair and scalp.
Hair masque is formulated for hair and scalp.
Leave-in blow-dry care is formulated for lengths and ends.
All products are contained in original Kérastase Paris Chronologiste packaging.

Kerastase Paris Premiere Haircare Set

Skylarc Ref M168447

Kerastase Paris Premiere Haircare Set.
Includes three products:
Concentre Decalcifiant Ultra-Reparateur 250 ml.
Bain Decalcifiant Reparateur 250 ml.
Fondant Fluidite Reparateur 200 ml.
Concentre Decalcifiant Ultra-Reparateur contains 8 percent citric acid and glycine.
Bain Decalcifiant Reparateur contains citric acid and glycine.
Fondant Fluidite Reparateur contains citric acid and glycine.
All items are suitable for all types of damaged hair.
Products are designed for decalcifying and repairing hair.

Egger Type T 8-150 Pump with Motor Assembly

Skylarc Ref S110228

Egger Type T 8-150 pump.
Serial number 92809.
Manufactured by Emile Egger & Co AG.
Tag indicates year of manufacture as 1994.
Stainless steel flanged fittings attached to pump.
Pump mounted on metal skid frame.
Electric motor included.
Motor housing shows severe corrosion and structural damage.
Wiring visible at motor terminal box.
Handwheel valve attached to output flange.
Output flange present on pump assembly.
Pump and motor mounted on pallet for handling.

K-2-SS Vibratory Sieve Separator

Skylarc Ref R110227

Model K-2-SS is indicated on the data plate.
Serial number 6624 is present on the data plate.
Electrical rating is 415 volts.
Frequency rating is 50 Hz.
Power rating is 1.75 kW.
Rotation speed is 960 rpm.
Multiple screening decks are installed.
Stainless steel construction is visible.
Screen mesh and deblinding balls are present inside the top deck.
Four discharge outlets with two fitted with flexible red sleeves.
Mounted on a round white painted base.
Requires three-phase power supply.

Endress+Hauser Promag 10 Electromagnetic Flowmeter

Skylarc Ref B168358

Model Promag 10 electromagnetic flowmeter.
Manufacturer Endress+Hauser.
Order code 10H50-1F0A1AA0A5AA.
Serial number 9B0D8419000.
Ingress protection IP67 NEMA Type4X.
Power requirement 20-28VAC 6W 50-60Hz.
Digital display with control buttons.
Stainless steel body with Tri-Clamp connections.
Product includes attached wiring and cable.

Milling Clamping Kit

Skylarc Ref A158256

jiunn liang Clamping Kit for Milling Machine

see photos for more details

Koch Sani-Pro UF Ultra Filtration Element

Skylarc Ref D166826

Koch Sani-Pro UF Ultra Filtration Element.
Spiral 4333-K131-45
Part No.0705295
Filter element 840mm long, 100mm diameter.
See our other listings for more of these filters.
New in unopened sealed box. Photos of exterior box label with serial number is accurate. Photos of unboxed filter are indicative.

Koch Sani-Pro UF Ultra Filtration Element

Skylarc Ref E166827

Koch Sani-Pro UF Ultra Filtration Element.
Spiral 4333-K131-45
Part No.0705295
Filter element 840mm long, 100mm diameter.
See our other listings for more of these filters.
New in unopened sealed box. Photos of exterior box label with serial number is accurate. Photos of unboxed filter are indicative.

Koch Sani-Pro UF Ultra Filtration Element

Skylarc Ref U166843

Koch Sani-Pro UF Ultra Filtration Element.
Spiral 4333-K131-45
Part No.0705295
Filter element 840mm long, 100mm diameter.
See our other listings for more of these filters.
New in unopened sealed box. Photos of exterior box label with serial number is accurate. Photos of unboxed filter are indicative.

Koch Sani-Pro UF Ultra Filtration Element

Skylarc Ref T166842

Koch Sani-Pro UF Ultra Filtration Element.
Spiral 4333-K131-45
Part No.0705295
Filter element 840mm long, 100mm diameter.
See our other listings for more of these filters.
New in unopened sealed box. Photos of exterior box label with serial number is accurate. Photos of unboxed filter are indicative.

Koch Sani-Pro UF Ultra Filtration Element

Skylarc Ref N166836

Koch Sani-Pro UF Ultra Filtration Element.
Spiral 4333-K131-45
Part No.0705295
Filter element 840mm long, 100mm diameter.
See our other listings for more of these filters.
New in unopened sealed box. Photos of exterior box label with serial number is accurate. Photos of unboxed filter are indicative.

90 Litre 3 Hp Air Compressor

Skylarc Ref Y167523

90 Litre 3 Hp Air Compressor
Single Phase

10 x Cutting and Grinding Discs

Skylarc Ref T168584

10 x Cutting and Grinding Discs

Wooden Chest

Skylarc Ref K168575

Solid wooden chest with hinged lid
External dimensions: 1000mm (W) x 450mm (D) x 520mm (H)
Internal dimensions: 960mm (W) x 375mm (D) x 420mm (H)
Classic rectangular design with stained wood finish
Black painted interior, ideal for storage
Strong construction suitable for general household use
Visible marks, scratches and wear consistent with use
Great as a blanket box, toy chest, or general storage unit

Office Desk

Skylarc Ref J168574

Modern office desk with sturdy black powder-coated steel legs
Desk top features a realistic light oak wood-grain finish for a professional look
Integrated cable management port with brush insert keeps cords tidy
Rectangular shape provides ample workspace for computers, monitors, and paperwork
Smooth, easy-to-clean laminate surface
Great for home offices, study rooms, or business settings
Desk dimensions approx: 1500mm (W) x 700mm (D) x 750mm (H)
Good condition with minimal wear visible on legs and top

Workshop Bench

Skylarc Ref I168573

Sturdy workbench with heavy-duty metal frame and solid timber top
Bench top dimensions: 1350mm (L) x 610mm (W) x 30mm thick
Overall height: 1100mm
Adjustable feet for stability on uneven floors
Includes Truper bench vice, opens to 110mm, jaw width 100mm
Vice features replaceable jaws and swivel base
Ideal for workshop, garage or industrial use
Clean, straight top with no visible major marks or damage
Ready for immediate use

PB Tech Raspberry Pi4 Starter Pack

Skylarc Ref Z167420

PB Tech Raspberry Pi 4 Starter Pack Kit No. SEVRBP0274
Raspberry Pi 4 Model B (8GB LPDDR4 RAM)
64-bit quad-core Cortex-A72 processor
Includes official Raspberry Pi red/white case
Official Raspberry Pi 3A USB-C power supply (AU plug, white)
32GB microSD card preloaded with NOOBS (OS)
Official Raspberry Pi micro-HDMI to HDMI cable
Power switch cable included
2 micro HDMI ports (supports up to 4Kp60), 2 USB 3.0 ports, 2 USB 2.0 ports
Gigabit Ethernet port, 802.11b/g/n/ac wireless, Bluetooth 5.0
New and unused, box only opened for photos

Raspberry Pi's and Associated Item

Skylarc Ref T167414

Large lot of Raspberry Pi and associated electronics, ideal for DIY or prototyping projects
Includes at least 4x Raspberry Pi 4 Model B boards (visible in trays)
Assorted Raspberry Pi HATs and add-ons
Multiple sensors including advanced flow sensors and CH4 gas sensors
Various power supplies, USB adapters, and cables
Protech JST connectors kit (new/near new)
Breadboard kit with jumpers and assorted electronic components
Boxes labeled with Pi add-ons, jumper GPIO wires, and more
SparkFun IoT/electronics development boards with antennas and Vodafone SIM cards
Large quantities of pre-cut and bulk wire (red and black)
Selection of cooling fans, spare boards, and miscellaneous modules/parts
Everything organized in practical compartment boxes for easy project building

Stainless Steel Bench

Skylarc Ref F168570

Stainless steel work bench with splashback, ideal for commercial kitchen or workshop use
Approximate dimensions: 2400mm length x 750mm depth x 900mm height
Solid stainless steel top, easy to clean and maintain
Integrated rear upstand with two cable or waste holes
Round stainless steel legs provide support, though some movement in the legs is noticeable
Surface in good condition with minor cosmetic marks from previous use
Sturdy work surface suitable for a range of applications

Ozone Generator

Skylarc Ref C167995

OdorStop Ozone Generator model OS4500UV2
Ozone output adjustable (Low/Medium/High)
Timer control up to 12 hours, hold and off settings
Warning: Do not use ozone in occupied spaces
120V 60Hz 94W power requirement (US-style plug fitted)
Powered by standard US mains plug (see photo)
Robust blue metal housing with carry handle
Back panel with accessible fuse
Made in China
Physical condition as per photos

Ozone Generator

Skylarc Ref B167994

Airthereal Ozone Generator, model MA10K-PRODIGI
Ozone production: 10,000mg/h
Input: 110-120V, 60Hz, 110W
No power cable included, unit is untested
Digital control panel with fan, ozone, power, interval, and timer functions
Blue metal case with carry handle
Warning: For use in unoccupied spaces only
Made in China, CE and RoHS certified
Serial number: A3MA2345 printed on unit

20A PWM Charge Controller

Skylarc Ref Z167992

Rovin MP3772 20A PWM Charge Controller, plug-and-play with Rovin solar panels
Supports GEL, AGM, flooded and lithium batteries
Rated voltage: 12/24V, max PV voltage: 50V
Rated current: 20A, max PV input 260W (12V) / 520W (24V)
3-stage charging with settable voltage and built-in timer
Dual USB ports for device charging
MCU control for reliable performance
Includes high current connectors, battery alligator clips, full cable kit and instruction manual

Assorted Electronic Components

Skylarc Ref H167402

Large lot of assorted electronic components and modules, ideal for prototyping, hobbyist or IoT projects
Includes multiple sensor boards: flow sensors, SGX NGM-1 methane (CH4), Sensair 006-1-0100 CO2, ethanol, ozone
Powertech Plus multi-voltage switchmode AC adaptors (3–12VDC/1.5A and 9–24VDC/1.5A max, both new in packaging)
Raspberry Pi accessories: genuine Pi 3 case (black, sealed), RTC clock module for Raspberry Pi
Sixfab Base HAT for IoT with antennas and Telit ME910C1-WW cellular module
XWST DC-DC converters (12/24V input to 5V3A USB output, qty 2, new in packaging)
Selection of terminal blocks, XT60 connectors, SIM cards (Spark M2M), microSD cards, and adapters
STM32 development tools (sealed pack), cabling, and miscellaneous PCBs and connectors
All items appear to be in new or lightly used condition as shown in photos

Industrial Ozone Generator Cabinet

Skylarc Ref F167010

Industrial ozone generator cabinet
Model: QLA-100G
Voltage: 220V / 50Hz single phase, 10A plug
Current: 5.5A
Rated power: 1.2kW
Stainless steel construction
Digital timer and current/voltage display
Ozone consistency control knob
Separate ozonizer and air pump switches
Cabinet size: 500 x 400 x 1200 mm
Net weight: 44kg
Three cooling fans on the side panel
Yellow inlet/outlet hoses with quick-connect fittings included
Suitable for large room purification or industrial applications
Manufacturer not identified

Electronics Cabinet with Raspberry Pi

Skylarc Ref S167985

Electronics cabinet with lockable front door and clear viewing panel
Includes Raspberry Pi single-board computer (shown with sensor/board attached)
Fitted with a secure multi-outlet power strip inside
Sturdy all-metal construction with wall-mount brackets
Front door features keyed cam lock (key not included)
Cabinet dimensions approx 700mm (H) x 520mm (W) x 240mm (D)
Great for network equipment, control systems, or smart hub installations
Interior is mostly empty—ample space for extra gear
Comes wired and ready for your own custom electronics projects

Genasun GV-5 10.7V MPPT Solar Charge Controller for Lithium

Skylarc Ref D167008

Genasun GV-5 MPPT solar charge controller for lithium batteries, model GV-5-Li-10.7V
Build date: 21/02/2024
Designed for 9V LiFePO4 (3S) lithium batteries, up to 5A charge current
Maximum Power Point Tracking (MPPT) technology for efficient solar charging
IP40 rated enclosure, CE, FCC, and RoHS compliant
Brand new and sealed in original packaging
Ideal for reliable, efficient charging in off-grid and mobile solar applications
Made in USA
More specs at: https://genasun.eu/products/genasun-gv-5-lithium-10-7-volt-mppt

Genasun GV-5 12.5V MPPT Solar Charge Controller for Lithium

Skylarc Ref C167007

Genasun GV-5-Li-12.5V MPPT solar charge controller for lithium batteries
Model: GV-5-Li-12.5V
Manufactured 03/2024
Supports 11.1V Li-ion (3S) batteries, 5A max charge current
High-efficiency MPPT design for optimal solar input
IP40 enclosure, CE, FCC, and RoHS compliant
Made in USA
Unit is brand new in sealed box—no prior use
Full specs available at: https://genasun.eu/products/genasun-gv-5-lithium-12-5-volt-mppt

SGX Sensortech INIR-EK4 Developmrnt Kit Gas Sensor

Skylarc Ref B167006

SGX Sensortech INIR-EK4 Development Kit for gas sensor applications
Manufacturer: Amphenol SGX Sensortech
Manuf part no: INIR-EK4
Order code: 3550706
Kit includes INIR-EK4 sensor interface unit with cable
Manufactured April 2024
New, factory sealed and unopened box
Ideal for developing, evaluating, and integrating INIR-EK4 NDIR gas sensors
RoHS compliant
Link to full specs and documentation: https://sgxsensortech.com/sensor/inir-ek4

SGX Sensortech INIR-EK4 Development Kit Gas Sensor

Skylarc Ref A167005

SGX Sensortech INIR-EK4 Development Kit Gas Sensor
Manufacturer: Amphenol SGX Sensortech
Part No: INIR-EK4
Manufactured April 2024
Supplied with original box and integrated USB cable (USB-A connector)
Designed to support evaluation and integration of SGX INIR gas sensors
Suitable for testing, development, and prototyping gas detection applications
Appears unused and in excellent condition
For full specifications and documentation, see: https://sgxsensortech.com/sensor/inir-ek4

Assorted Power Supplies and Associated Items

Skylarc Ref J167976

Large lot of assorted power supplies and related items as per photos
Includes multiple power bricks, AC adapters, and various cables
Mix of DC power adapters, mains leads, test leads, and patch cords
Contains some new/unused components in sealed packaging
Notable brands visible include Multicomp Pro, DigiKey, and Powertech
Range of connectors: barrel plugs, Ethernet, USB, IEC, and more
Items stored in labelled plastic containers for easy transport
Great lot for electronics projects, repairs, or spare parts
Quantities and exact specifications vary—see images for details

Plastic Container with Regulators and Associated Connectors

Skylarc Ref H167974

Plastic container with assorted regulators, connectors, and parts included.
1 x YQD-37A dual gauge gas regulator with brass fittings.
JFLEX 50mm pressure gauge, 1/4" BSP male, for compressed air (new, in packaging).
DuralLOY boxed gas regulator and related small fittings.
Range of brass, steel, and plastic connectors and adaptors, including PowerFit brass BSP adapter.
Selection of fittings in original packaging – RS PRO, Repelec, and others.
Assorted hoses, Teflon tape, and miscellaneous plumbing/gas accessories.
Contents as pictured – ideal for workshop or spares.

20m 15A Extension Cord

Skylarc Ref D167970

20 metre heavy duty extension cable
Rated for 15A, 250V
Bright orange cable for visibility and safety
Fitted with clear, heavy duty 15A plug and socket
Plug and socket marked “United Eagle”
Suitable for construction, workshop, and outdoor use
Cable and connectors appear in good condition with only minor signs of use

Radford Air Compressor with GEC Induction Motor

Skylarc Ref Z168694

Radford air compressor unit.
Compressor head marked Radford CH CH NZ.
GEC induction motor made in England.
Motor rated at 2 horsepower.
Motor operates at 400 volts 3 phase.
Motor current draw is 3.3 amps.
Motor speed is 1410 RPM.
Pressure switch is Danfoss Trykafbryder type PS-60467.
Pressure switch range is 100-170 PSI.
Pressure switch operates at 6A 500V AC or 6A 220V DC.
Tank is horizontal cylindrical steel construction.
Fitted with a pressure gauge and valve.

Industrial and Commercial Fans 318 NWR 2.2kW Fan

Skylarc Ref W168691

Manufacturer is Industrial and Commercial Fans Ltd Auckland New Zealand
Model 318 NWR
Serial number C05294
Motor rating 2.2 kW
Motor is 2 pole
Fan speed 2875 RPM
Pitch angle 28 degrees
Equipped with Monarch 3-phase induction motor
Motor power 2.2 kW
Motor operates at 50 Hz
Motor RPM 2875
Motor insulation class F
Voltage rating 380-415 V
Monarch motor frame 90L-2
IP55 rated
Motor manufactured by Teco Australia Pty Ltd
Fitted with flexible conduit for wiring
Exposed wire ends visible

Vacuum Pump with Magnetic Starter 3.7kW

Skylarc Ref Q168685

Vacuum pump unit
Fitted with magnetic starter type MS-AII-PB
Starter voltage rating 200-240 or 380-440 or 500-550V
Starter 3 phase
Power rating 3.7kW or 5HP
Tested by Macdonald Machinery Ltd
On off switch present but noted as disabled
Runs when powered according to attached tag
Multiple output ports visible
Power cable included but not terminated

Large Industrial Heating Band Clamp 230V AC 280W

Skylarc Ref O168683

Large industrial heating band clamp
Marked 230V AC 280W
Manual screw adjustment with red handwheel
Braided electrical cord with three-pin plug
Metal construction
Clamp width 100mm
Electrical rating 230V AC 280W
Strapped to wooden pallet
Single Phase

Office Shelving Unit and Drawer Cabinets Set

Skylarc Ref L168680

Includes one tall open shelf unit with eight compartments measures 800mm x 300mm x 1700mm
One small open shelf unit with three compartments measures 360mm x 290mm x 800mm
One two-drawer mobile cabinet with dark sides and handles measures 400mm x 500mm x 630mm
One three-drawer cabinet with light wood finish and metal handles measures 500mm x 400mm x 600mm
Tall shelf unit has visible marks on shelving
Three-drawer cabinet top has visible wear
Two-drawer cabinet is mounted on wheels
All drawer units feature metal handles
Wood finish on all items
No manufacturer branding visible

Metal Workbench with Black Steel Bench Vice

Skylarc Ref H168676

Metal workbench with rectangular top.
50mm Tubular steel frame construction.
Surface shows wear and discolouration.
Bench vice is black Steel brand, opens to 150mm with a jaw width of 150mm
No visible identifying model numbers.

Red Benchtop Sandblasting Cabinet

Skylarc Ref G168675

Red benchtop sandblasting cabinet constructed from metal
Features two glove ports with internal gloves installed
Clear top viewing window with two locking latches
Internal blast gun and hose included
Fits small to medium workpieces for surface preparation
Air line connection port located on side
On off switch located on exterior side panel
Suitable for abrasive blasting with compatible media
Warning label attached to front panel
Internal filter element visible inside cabinet
Power connector port on rear side
power cable is missing
Mesh work platform inside the cabinet
Rubber feet fitted to metal legs

Jonnesway AN040066 Puller and JTC 849070 70mm Socket

Skylarc Ref D168672

Jonnesway AN040066 puller tool shown.
Puller tool is black metal with hex head and threaded shaft.
JTC socket stamped with 849070 and 70mm marking.
Socket is black metal and has a large hexagonal profile.
Two pieces included as shown in the images.

Ozito Reciprocating Saw 920W

Skylarc Ref C168671

Ozito Reciprocating Saw.
Mains powered reciprocating saw with 920W motor.
No load speed from 800 to 3000 strokes per minute.
Stroke length is 24mm.
Tool-free blade fitting system.
Cutting capacity for timber is 210mm.
Cutting capacity for aluminium is 20mm.
Cutting capacity for non-alloy steel is 10mm.
Weight is 3.5kg.
Includes original plastic carry case.
Comes with four blades visible in packaging and additional used blades.
Comes with two timber cutting blades and two metal cutting blades as standard equipment.
Includes printed instruction manual.

Oztrail Portable Toilet Single Flush P-FCM-PT-B

Skylarc Ref B168670

Oztrail Portable Toilet Single Flush model P-FCM-PT-B.
Includes one unit per box.
Plastic construction in beige and white.
Manual flush operation by pump.
Removable waste holding tank with slide valve.
Cap provided for emptying and cleaning waste tank.
Instructions for use and waste treatment printed on lid.
Imported by L E Whittaker & Sons P/L Australia.
Made in China.

Lawnmaster 660 Reel Mower

Skylarc Ref Y168667

Lawnmaster 660 model reel mower
Powered by a four-stroke petrol engine
Engine cover is red with black and silver pull-start
Throttle control lever on handlebar
Blade reel and rear roller visible
Manual push operation with clutch lever on handlebar
Orange and green outer housing
No catcher included
No further specifications available

Black Metal Two Drawer Filing Cabinets

Skylarc Ref W168665

Lot includes two black metal filing cabinets
Each cabinet has two drawers
Both cabinets feature lock mechanisms
One cabinet contains suspension files as shown
No manufacturer label visible
Cabinets are designed for office or industrial use
Color is black
Handles are integrated with the drawer fronts
Drawers are designed for vertical file suspension
Cabinet exterior shows visible signs of prior use

Nimrod Excavator Bucket

Skylarc Ref T168662

Brand is Nimrod
Width across bucket is approximately 260mm
Pin centre to pin centre distance is approximately 220mm
Overall height is approximately 600mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

Nimrod Excavator Bucket

Skylarc Ref S168661

Brand is Nimrod
Width across bucket is approximately 160mm
Pin centre to pin centre distance is approximately 220mm
Overall height is approximately 750mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

Excavator Bucket

Skylarc Ref R168660

Width across bucket is approximately 400mm
Pin centre to pin centre distance is approximately 190mm
Overall height is approximately 600mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

Excavator Bucket

Skylarc Ref Q168659

Width across bucket is approximately 400mm
Pin centre to pin centre distance is approximately 210mm
Overall height is approximately 600mm
Attachment points at top of bucket
Steel construction
Rust visible on exterior and interior surfaces

Galvanised Mesh Gates 17x Various Sizes

Skylarc Ref P168658

Lot includes 13 gates measuring 2500mm x 1060mm
Lot includes 4 gates measuring 1400mm x 1060mm
Gates are constructed with galvanised pipe frames
Gates are fitted with steel mesh infill
Gates have integral hinge fittings
Gates are stacked on a timber pallet
Total of 17 gates in lot

Steel Storage Box with Assorted Tools

Skylarc Ref O168657

Steel storage box shown with hinged lid.
Box secured with two chain loops on the front.
Box is painted grey with visible rust and wear.
Box is positioned on a timber pallet base.
Contents include assorted hand tools.
Visible tools include shovels, garden rakes, and yard brooms.
Quantity and condition of individual tools unknown.
Entire contents included as shown.

Stainless Steel Mixing Tank with WEG Motor and Radicon Gearbox

Skylarc Ref W168639

Stainless steel cylindrical mixing tank
Fitted with internal agitator blades
WEG 3-phase induction motor installed
Motor model 90S-1192
Motor power 1.1 kW
Motor speed 1430 rpm
Motor voltage 415V
Motor current 2.9A
IP55 rated motor enclosure
Radicon Series A gearbox by David Brown
Gearbox ratio R51D
Fitted with Schneider Electric LE1D12N7 control unit
Control unit rated IP65
Tank fitted with multiple inlet and outlet valves
Three-phase power plug fitted
Horizontal agitator shaft visible through top hatch
Circular steel tank with welded supports
Circular top lid with lifting eyes

Contra Shear S12 6mm Screen

Skylarc Ref U168637

Brand: Contra Shear
Model number: S12 6mm
Serial number: S79702
Constructed from stainless steel
Equipped with a wedge wire screen
Screen slot size 6mm
Manufactured in Auckland New Zealand
Inlet valve visible on top front
Outlet pipe located at the rear base

Oxy Acetylene Welding Kit on Trolley with Gauges and Torch

Skylarc Ref T168636

Oxy acetylene welding kit mounted on a metal trolley
Includes gas cylinder
Fitted with Steadyflo and Proflo pressure regulators
Multiple pressure gauges visible on the cylinder
Includes welding hoses
Welding torch included
Protective face shield included
Two large steel wheels on trolley
Steel base tray for stability
Torch handle and controls shown
Mask and other accessories visible on trolley

Devon Platform Scale 45kg

Skylarc Ref S168635

Devon brand platform scale
Maximum capacity is 45kg
Dial reads up to 45kg in 0.2kg increments
Large round analog dial display
Flat metal weighing platform
Metal frame construction
Visible calibration label on column
Mechanical operation with no visible power supply
Freestanding floor unit

Hazardous Materials Containers

Skylarc Ref R168634

Four plastic barrels included.
Each barrel is empty.
Barrel dimensions are approximately 580mm x 580mm x 900mm.
Two barrels are blue plastic.
Two barrels are turquoise plastic.
Barrels have removable screw top lids.
Barrels are pallet wrapped for transport.

3 x Faulty Pallet Movers

Skylarc Ref O168631

Three pallet movers included in this lot.
One orange Jet brand pallet mover.
One yellow pallet mover.
One white Crown brand pallet mover.
None of the pallet movers have a functioning lift system.
All units have standard manual handles.
Condition as shown in photos.

Pall Filter Housing SAS16S1NW80J

Skylarc Ref N168630

Pall filter housing model SAS16S1NW80J
Maximum operating pressure 0.7MPa
Maximum operating temperature 140°C
Material appears to be stainless steel
Unit is mounted on three fixed legs
Domed top with lifting handles and bolted flange
Inlet and outlet ports visible
No filtration elements included
Internal and connection cleanliness not verified

Stainless Steel Process Strainer Vessel

Skylarc Ref M168629

Stainless steel vessel with mounted legs.
Cylindrical body with removable lid and latch handles.
Side outlet features a flanged fitting with white polymer connection.
Bottom outlet with flanged fitting and valve assembly.
Internal perforated basket visible from the top and side openings.
Designed for in-line process straining or filtration.
Three fixed support legs with mounting feet.
Inspection port or lid includes a lifting handle.
Suitable for industrial liquid processing applications.
Dimensions and capacity not specified.

Yao Han F300A Bag Closing Sewing Machine with Conveyor

Skylarc Ref Z110261

Yao Han brand sewing machine.
Model F300A.
Mounted on a metal conveyor system.
Powered by an electric motor.
Includes foot pedal control.
Equipped with thread spool holders.
Control panel mounted on the side of the conveyor.
Large plug connector attached to power cable.
Bag closing sewing head present.
Serial number as shown in photo.
Made by Yao Han Industries Co Ltd.
Made in Taiwan.

Faulty MEGA Hydraulic Floor Jack

Skylarc Ref Y110260

Faulty MEGA hydraulic floor jack.
Steel construction.
Long handle with T-grip and pump lever.
Four wheels for mobility.
Saddle plate at lifting end.
No lifting capacity marked on visible surfaces.
Surface shows areas of rust.
Unit is untested.

DWS Ashford Kent England Foot Operated Industrial Stapler

Skylarc Ref U110256

Foot operated industrial stapler.
Manufactured by DWS.
Marked Ashford Kent England on the arm.
Metal construction.
Pedal mechanism for operation.
Intended for heavy duty or industrial stapling tasks.
Freestanding frame design.

WEG W22 Electric Motor with Coupled Pump

Skylarc Ref S110254

WEG W22 electric motor.
Model TE18FOX0.
Power rating 3.5 HP.
IP66 enclosure.
3 phase configuration.
Voltage 380V/660V at 50Hz or 400V/690V at 50Hz or 415V at 50Hz or 460V at 60Hz.
Speed 2890 to 3510 RPM depending on voltage and frequency.
NEMA efficiency 89.9 percent.
Weight 42 kg.
Motor manufactured April 2016.
Motor is coupled to an industrial pump assembly.
Pump has metal frame and two flanged ports.
Coupled unit includes wiring and plug visible.

CP-300 Electric Winch

Skylarc Ref R110253

Model CP-300
Maximum load 300 kg
Speed 10–15 metres per minute
Power supply 240 V 50 Hz
Motor 1.5 HP x 4P
Mounted on a metal stand
Equipped with steel wire rope on drum
Power wiring with five colour coded wires shown
Visible corrosion on motor casing and components
Label on housing identifies specifications
Serial number on label is 301228

Cast Iron Pipe Flange Fitting DN150 GRS200

Skylarc Ref Q110252

Cast iron fitting with flanged connections.
Markings indicate 35402V DN150 GRS200.
DN150 refers to nominal diameter 150mm.
One large flange with eight bolt holes.
Component appears welded and machined.
Multiple mounting holes on base.
Suitable for industrial piping or similar applications.
No further information available about manufacturer or specifications.

Moduline Curved Conveyor Belt with SEW-Eurodrive Motor

Skylarc Ref L110247

Moduline curved conveyor belt
Manufactured by Henley Industries
Belt width is 300mm
Equipped with SEW-Eurodrive (N.Z.) Ltd motor
Motor type KAF 30 DT71D4
Motor rated at 0.25kW
Motor voltage 230D 400Y
Motor speed 660 82 RPM
Motor IP rating 55
Fitted with orange industrial power plug
Mounted on stainless steel frame

WEG TEFC Motor with Stainless Pump Assembly

Skylarc Ref K110246

WEG brand electric motor.
Model TEFC W22.
Power rating 15 kW.
Voltage 415 V.
Current 51.4 A.
Speed 2960 RPM.
Duty S1.
Insulation class H.
Frequency 50 Hz.
IP66 rated enclosure.
Motor plate weight 258 kg.
Includes stainless steel pump assembly.
Pump casting shows marking 0458480026.
Supplied mounted on a steel baseplate.
Fitted electrical isolator box with rotary switch and attached cable.

NETZSCH NMO 55S 70/8S48B Progressive Cavity Pump

Skylarc Ref J110245

Manufacturer NETZSCH
Model NMO 55S 70/8S48B
Mach No 67812
Comm No 80200010138
Motor driven progressive cavity pump
Stainless steel hopper tank with bottom outlet
Electric motor attached to pump
Mounted on steel base frame
Various attached cables and wiring included
Includes attached inlet and outlet fittings
Pump identification plate visible in images
Condition and functionality as per photos

WEG Electric Motor

Skylarc Ref I110244

WEG brand electric motor.
Three groove pulley attached to shaft.
Green metal housing.
Terminal box with WEG marking.
Housing and external components show visible rust and paint wear.
Motor cable present with exposed conductor ends.
Mounting feet with bolt holes integrated to housing.
No further specifications or rating plate details are visible.

WEG W22 High Efficiency Motor with SPX APV Fluid Handling Pump

Skylarc Ref H110243

WEG W22 High Efficiency motor
Model number TE1BFOX80
Motor power 3 kW
4.0 HP
380 to 415 V
5.85 to 5.66 A Y
50 Hz
2900 RPM
IP66 protection
Insulation class F
Duty S1
SF 1.15
Motor weight 33 kg
Plate marking date 05APR2018
SPX APV Fluid Handling pump section
Order number 27394014
Model W+22/20
Serial 820100002311
Includes industrial power connector

75mm Box Steel 2100mm Long with Casters

Skylarc Ref G110242

75mm box steel beams
Length of each beam is 2100mm
Casters have red outer rings and black inner wheels
Steel beams are painted white
Beams have mounting plates at each end with multiple holes
Visible surface rust present on beams and mounting plates
Total of two box steel beams are shown
Beams and casters are physically attached as single units

3 Steel Bollards

Skylarc Ref C110238

three steel bollards
Two bollards are 180mm in diameter
One bollard is 120mm in diameter
All three bollards are 1100mm tall
Galvanised finish
Each bollard has a baseplate with mounting holes
Baseplates show surface rust

Industrial Gear Motor with Mount Brackets

Skylarc Ref Z110235

Industrial gear motor unit shown in images
Attached dual steel mounting brackets with slotted bolt holes
Large metal output gear with visible rust and wear
Electric motor housing attached to gearbox
Wiring terminals exposed at rear of motor
Housing appears to be cast metal construction
No identification labels visible in provided images
Power rating and other specifications not visible

SEW-EURODRIVE K97 DRE100M4BE5/DH Gearmotor

Skylarc Ref Y110234

Manufacturer SEW-EURODRIVE
Model K97 DRE100M4BE5/DH
Part number 22.2237597001.0001.10
Rated power 2.2 kW S1
Frequency 50 Hz
Input speed 1425 rpm
Output speed 15 rpm
Power factor Cos φ 0.80
Thermal class 155(F)
Voltage 220-242V Delta or 380-420V Star 3 phase
Gearbox oil CLP 220 Mineral Oil
Weight 96.80 kg
Mounting hardware included as shown
Large output gear fitted
Serial number on plate 22.22105793.001.08.310

Tarlton Electric 7.5kW 380V Electric Motor with Pump Housing

Skylarc Ref X110233

Tarlton Electric motor
7.5kW power rating
380V voltage
16 amps
2900 RPM
Frame D180
Drive end bearing type 6208
Non-drive end bearing type 6208
Date marked 14/12/15 on nameplate
Includes stainless steel pump housing
Pump housing features threaded and clamp fittings
Electric motor is flange mounted with lifting eye

SEW-EURODRIVE K97 DRE100M4BE5HF Gearmotor

Skylarc Ref W110232

SEW-EURODRIVE gearmotor
Model K97 DRE100M4BE5HF
Serial number 22.2214866101.0001.15
Power 2.2 kW S1
Rated speed 1425 rpm input 15 rpm output
Voltage 220-242V or 380-420V
Current 8.20A or 4.70A
Three phase
Efficiency 85.4 percent IE2
IP66 rated enclosure
Thermal class 155(F)
Cos phi 0.80
Torque 96.80 Nm
Maximum torque 1430 Nm
Lubricant type CLP 220 mineral oil 20.00 liters
Weight 202 kg
Gearmotor made in New Zealand

Industrial Hydraulic Pump with Flanged Mount

Skylarc Ref V110231

Hydraulic pump with cast body construction
Square steel flange mount with four main through holes
Central shaft with multiple splines
Two main hydraulic ports at base with threaded connections
Flange secured with four bolts and nuts
Overall unit shows surface rust on steel components
No identification plate or branding visible
Dimensions approximated from images only
No wiring or hoses included

Hydraulic Motor with Mounting Plate

Skylarc Ref U110230

Hydraulic motor assembly
Includes mounting plate with four bolt holes
Splined output shaft
Two hydraulic hose fittings present on the body
Cast body construction
Serial or part number visible: 6629432
No manufacturer label visible
Condition and specific model unknown

Weg AL100L-04 Electric Motor with DABIBC Pump on Stainless Frame

Skylarc Ref T110229

Electric motor is a Weg AL100L-04 model.
Motor rated for 3.0-4.0 kW depending on voltage.
Rated voltage 220/380V Δ/Y or 230/400V Δ/Y 50Hz.
Motor current rating is 11.0/6.35A at 220/380V.
Rated speed is 1740 RPM.
Protection class IP55.
Gearbox or pump is DABIBC brand.
Mounted on stainless steel frame.
Pump is coupled to the motor via flanged connection.
Pump inlet and outlet ports are visible.
Power cable is included and not terminated.

Stainless Steel Mixing Tank with Agitator

Skylarc Ref P110225

Stainless steel construction tank.
Equipped with three ports on the lid.
One large threaded opening on the lid for access or filling.
Mounted on three legs for stability.
Includes an internal agitator with shaft and impeller.
Agitator attached to the tank lid and extends to the bottom.
Bottom side outlet port visible.
Condition and specifications based only on visible features.
Capacity not marked or specified.
No visible control electronics or motor included for the agitator.
Dimensions and volume not confirmed.

FluidPro S75GDFT-300 Mixer with SEW-EURODRIVE Gearmotor

Skylarc Ref O110224

FluidPro industrial mixer
Model S75GDFT-300
Serial number FV20031098A
Fitted with SEW-EURODRIVE gearmotor
SEW-EURODRIVE model FAF77 R37 AM71
SEW-EURODRIVE serial number 20.7875474302.0002.20
SEW-EURODRIVE rated speed 1400 or 2.1 rpm
Maximum torque 1110 Nm
Sydney Australia SEW-EURODRIVE nameplate
Contact details for FluidPro visible on nameplate
White painted base and mounting plate
Large gearbox with flange fitting
No cables or motor data label visible in images

SEW-Eurodrive RF57 DRE100M4 Gearmotor

Skylarc Ref N110223

SEW-Eurodrive gearmotor
Model RF57 DRE100M4
Part number 22.2237547302.0001.16
Rated power 2.2 kW S1
Supply voltage 220-242Δ or 380-420Y V
Current rating 8.20 or 4.70 A
Rated frequency 50 Hz
Speed 152 rpm
Efficiency 85.1E2
IP66 enclosure rating
Thermal class 155(F)
Gear ratio 9.35
CLP 220 mineral oil specified
Inverter duty VPWM
Cos φ 0.80
IM M4 mounting type

SEW-EURODRIVE RF77 DRE100M4 Gearmotor

Skylarc Ref M110222

Manufacturer SEW-EURODRIVE
Model RF77 DRE100M4
Part number 22.2237547301.0001.16
Power 2.2 kW S1
Frequency 50 Hz
Speed 1425 rpm motor speed 39 rpm output speed
Voltage 220-242V Delta 380-420V Star
Current 8.20A Delta 4.70A Star
Efficiency 85.4 percent IE2
Enclosure rating IP66
Thermal class 155F
Cos phi 0.80
Inverter duty VPWM
Torque 545 Nm nominal maximum 820 Nm
Ratio 36.83
Oil type CLP 220 Miner.Oil 3.5L
Mounting IM M4
Weight not specified

Techtop TAI 100LB-4 Electric Motor

Skylarc Ref L110221

Techtop TAI 100LB-4 electric motor
Rated power 3kW
Voltage options 415V 50Hz 3 phase or 230/400V Δ/Y 50Hz or 440/480V Y 60Hz
Current ratings 6.41A at 415V 50Hz or 10.9/6.32A at 230/400V 50Hz or 6.27A at 440/480V 60Hz
Speed 1450 rpm at 415V 50Hz or 1445 rpm at 230/400V 50Hz or 1750 rpm at 440/480V 60Hz
Efficiency 86.0 percent
Protection class IP55
Insulation class F
Mounting IM B3
Weight 27.5kg
Shaft and flange visible in photos
Supplied by Techtop Australia Pty Ltd
Includes fan cover
Serial number 1910-007 1032
Manufactured in 2019
Bearings specified as DE 6206 ZZ C3 and NDE 6206 ZZ C3
IEC 60034-1 compliant

PN40 DN80 Flanged Globe Valve Handwheel Operated

Skylarc Ref A110210

Globe valve with manual handwheel operation
Blue painted metal body
Flanged ends with 8 bolt holes on each flange
Markings include PN40 and DN80
Flow direction indicated by embossed arrow
100619 marking on body
Handwheel marked with 'OPEN 250 SHUT'
Plastic protective flange covers fitted
Suitable for process or pipeline applications

PN40 DN80 Flanged Globe Valve Handwheel Operated

Skylarc Ref Z110209

Globe valve with manual handwheel operation
Blue painted metal body
Flanged ends with 8 bolt holes on each flange
Markings include PN40 and DN80
Flow direction indicated by embossed arrow
100619 marking on body
Handwheel marked with 'OPEN 250 SHUT'
Plastic protective flange covers fitted
Suitable for process or pipeline applications

PN40 DN80 Flanged Globe Valve Handwheel Operated

Skylarc Ref Y110208

Handwheel operated globe valve
Blue painted cast body
Marked PN40
Marked DN80
Flanged ends with bolt holes
Manual open and close operation
Black handwheel actuator
Bronze or brass seat visible at flange face
Raised face flanges
Valve body marked with 2861 and L0619

DN80 PN40 Flanged Globe Valve Handwheel Operated

Skylarc Ref X110207

DN80 marking on valve body
PN40 marking on valve body
Flanged ends with bolt holes
Handwheel operated mechanism
Blue coated metal construction
Top cover secured with bolts
Wheel is black plastic or metal
Gland area has two hex nuts visible
Body appears to be cast metal
Valve face has yellow plastic dust cover
Visible body marking: 1.0619
Visible body marking: 6173

Bonetti Cesare CB1 1½" PN16 Flanged Gate Valve

Skylarc Ref W110206

Manufacturer is Bonetti Cesare
Model CB1
Valve type is gate valve
Size is 1½ inch
Pressure rating is PN16
Body marked with A105
Flanged ends
Hand wheel operation
Direction marked with arrow on valve body
Body marked with BTM
Marking 32001007 on valve body
Color is blue

Industrial Gearbox Unit

Skylarc Ref J110219

Industrial gearbox unit.
Heavy cast housing construction.
Large external spur gear attached to output shaft.
Gearbox mounted on a steel base with slotted holes for bolting.
Multiple access ports on housing sides.
Four bolts attached to the removable cover plate on the top.
Visible signs of wear and surface rust on gear and housing.
Physical measurements and manufacturer details are not marked or visible.
Weight and ratio unknown.

Robus RP50LEDF45-04 50W LED Floodlight

Skylarc Ref H110217

Robus 50W LED floodlight
Product code RP50LEDF45-04
Input voltage 220-240V 50/60Hz
Total power 50W
Correlated colour temperature 4500K
IP65 rated enclosure
Black plastic and metal housing
Includes attached cable with orange 3-pin 10A 250V plug
Plug is NHP brand model 150PS310P
CE marked

SEW-Eurodrive K97 Electric Motor Gearbox Unit

Skylarc Ref C110212

SEW-Eurodrive electric motor and gearbox unit
Model K97 DT71N4/NN100LS4/B35HP
Metal identification plate indicates New Zealand supply
Motor type: 3-phase AC
Rated voltage: 230/400V Δ/Y
Gear ratio: 96.80
Max torque: 1400 Nm
Unit includes attached gearbox with output drive
Cooling fan fitted to the top of the motor
Physical condition and completeness as shown in photos

2.9 Metre Ullrich Aluminium Ladder Trade Rated 150kg

Skylarc Ref D109901

Ullrich aluminium ladder
Trade rated 150kg
Extension step ladder configuration
Green and silver finish
Visible manufacturer label
Material appears to be aluminium
No additional accessories included

Stainless Steel Processing Vessel

Skylarc Ref L168628

Stainless steel construction
Two horizontal cylindrical chambers
Each chamber has clamp-secured end caps
One chamber features a cone bottom with a butterfly valve outlet
Butterfly valve has a blue handle
Tri-clamp fitting on top of one chamber
Angled stainless steel infeed chute
Chambers are mounted on a rectangular steel frame
Flanged fittings present on both ends of one chamber
Internal supports visible in frame cavity
Unit is pallet-mounted for transport
No electrical connections are visible
No manufacturer identification visible
Dimensions and capacity are not specified

Double Drum Stainless Steel Tumbler with CMG Three Phase Motor

Skylarc Ref H168624

Double drum stainless steel tumbler unit
CMG three phase motor fitted
Motor power 0.37 kW
Motor voltage 380V
Motor current 1.3A
Motor RPM 1390
Motor bearing DE 6202-2RS/C3 NDE 6202-2RS/C3
Manual start and stop push button controller included
Start stop control box by Sprecher+Schuh model KSA-12
Fitted with water inlet or spray bars to both drums
Unit is mounted on stainless steel frame
Three phase plug attached to power cable
IEC 60034 CE rated motor

Large Wooden Storage Cabinet with Three Doors

Skylarc Ref D168620

Large storage cabinet constructed from wood panels
Front features three turquoise-colored doors with locking latches
Each door provides access to a separate cabinet compartment
Each compartment contains four internal shelves
Side and back panels are constructed from plywood
Cabinet frame includes metal trim for added reinforcement
Visible external width accommodates three large storage sections
Shelves are fixed and span the width of each compartment
Approximate total height and depth not specified
Some compartment shelves contain miscellaneous items as shown
No manufacturer label or model number present
Designed for secure storage of tools, equipment or supplies

Renold PH60 Gearbox with WEG Electric Motor

Skylarc Ref B168618

Renold PH60 gearbox unit.
Serial number 8439.
Gearbox ratio 63.4:1.
Mounting type JC.
Recommended gearbox oil: Mobil SHC632.
Supplied and serviced by Renold New Zealand Ltd.
WEG 3-phase electric motor.
Motor model: 3~132S.
Motor power: 5.5 kW at 1460 rpm on 380V/660V 50Hz.
Motor IP55 rating.
Motor weight: 87 kg.
Six-pin industrial power plug attached.
Chain sprocket fitted to gearbox output shaft.

Set of Five Green Wheelie Rubbish Bins

Skylarc Ref Z168616

Includes five green wheelie bins.
All bins have two black wheels each.
Lids attached to each bin.
Three bins have "Rubbish" labels on lids.
Plastic construction.

Stainless Steel Pipe Fittings and Plastic Bin

Skylarc Ref E109902

Assorted stainless steel pipe fittings included.
Multiple curved pipe sections present.
Some sections have attached clamps and valves.
Pipe fittings appear to be tri-clamp style connections.
White cylindrical plastic bin included.
Some pipe fittings have visible surface discoloration.
Set includes both large and small diameter pipes.
All items are as shown in provided images.

Industrial Steel Access Platform with Stairs and Handrails

Skylarc Ref X168614

Top platform dimensions are 940mm x 1360mm
Platform height is 1850mm from the ground
Handrails add 1000mm to the platform height
Perforated steel steps and platform
Fixed steel frame construction
Stairway access to the platform
Handrails on platform and stairs for safety

Hitachi 2t Electric Chain Hoist Type 2FH

Skylarc Ref V168612

Manufacturer Hitachi Ltd Tokyo Japan
Model Electric Chain Hoist
Type 2FH
Rated load 2 tonne
Lift 6 metres
Chain diameter 10 mm
Speed at 50Hz 6.8 m/min
Speed at 60Hz 8.2 m/min
IP rating 44
Three phase motor
Rated 220V 50Hz 2.4kW 12.5A
Rated 380V 50Hz 2.4kW 6.0A
Rated 415V 50Hz 2.4kW 6.0A
Motor 2 poles
Mass 87 kg
Grade M4
Rated 30% ED 180 S/h
Date of manufacture 2001
Limit switch 600V 17A 50/60Hz

Stainless Steel Water Filtration System with Blue Filter Housings

Skylarc Ref T168610

Stainless steel water filtration system.
Includes two blue plastic filter housings.
System features stainless steel piping and fittings.
Equipped with several manual valves.
Contains a pressure gauge fitted to the system.
Includes a cylindrical stainless steel vessel.
Mounted on a white plastic baseboard.
All components visible in photos are included.
No brand or model number is specified.
Condition and completeness not specified.

Stainless Steel Industrial Mixing Kettle with Motorised Agitator

Skylarc Ref S168609

Stainless steel mixing kettle.
Motorised agitator installed.
Schneider Electric control box attached.
Includes integrated drain valve at base.
Large hand wheel for tilting operation.
Mounted on steel frame.
Equipped with flexible hose connections.
Agitator blades visible inside kettle.
Electric motor fitted on top of frame.
Power cable attached.
No information provided on capacity or power rating.

Heavy Duty Steel Bracket Assembly

Skylarc Ref R168608

Steel fabrication bracket assembly shown.
Made from rectangular steel tube sections.
Welded construction with steel plates and bolts.
L shaped design with two base arms and vertical upright.
Extended horizontal arm with mounting bracket at end.
Base includes chain and bolt mechanisms.
Surface shows welded joints and structural reinforcement.
No manufacturer or model identification visible.
No electrical or moving parts identified.

Stainless Steel Pipe Fittings and Valves Pallet

Skylarc Ref Z110001

Mixed stainless steel pipe fittings and valves on one pallet
Includes straight pipes and various elbow sections
Several blue-handled ball valves present
Contains some flanged fittings and connectors
One flowmeter with digital display included
Some manual butterfly or ball valves included
Assortment of tri-clamp and threaded connections visible
Includes pipe sections with welded and threaded joints
Condition and size of individual parts vary
Pipe diameters vary across the pallet
All items as shown in the provided images

Stainless Steel Filter Press Plates

Skylarc Ref G109904

Stack of stainless steel filter press plates.
Plates have perimeter gaskets installed.
Plates have internal perforations for liquid flow.
Rectangular plate design.
Mounted on a plastic pallet.
Exact quantity not specified.
Dimensions and manufacturer not specified.

Industrial Stainless Steel Motor Assemblies

Skylarc Ref H109905

Set of five stainless steel motor assemblies shown.
Each assembly has a cylindrical stainless steel housing.
Front end of each unit features a large flange and conical shaft.
Protective perforated metal cover at rear of housing.
Each unit is fitted with electrical wiring and a four-pin industrial plug.
Plug is an industrial 4-pin circular type with orange insulation ring.
Units appear to have fluid connections on housing.
No labels or nameplates visible to specify manufacturer or model.
No control boxes or external accessories visible.

Set of Four Industrial Rollers 1800mm x 200mm

Skylarc Ref I109906

Set of four industrial rollers.
Each roller is 1800mm in length.
Each roller has a diameter of 200mm.
Material appears to be metal.
Includes end mounting brackets and shafts.
All rollers secured together with a red strap for transport.

Stainless Steel Industrial Pump with 4-Pin Electrical Connector

Skylarc Ref K109908

Stainless steel industrial pump housing.
Removable stainless steel pump head included.
Four-pin heavy duty industrial electrical connector attached.
Pump assembly is mounted on a pallet for transport.
Pump head has threaded input and output ports.
Control box located at rear of unit with mounting bolts visible.
Wiring and internal pump components visible through open access point on housing.
No manufacturer or model information visible.
Electrical cord exits from rear of unit.

Assorted PVC pipe fittings and metal brackets

Skylarc Ref L109909

Lot contains various PVC pipe fittings.
PVC pipe fittings include elbows reducing couplings end caps and junctions.
Assorted sizes and shapes of PVC fittings are present.
Includes several metal pipe brackets and straps.
Some metal channel bar sections are included.
The items are contained within two red plastic tote bins.
Plastic pallet is included in the lot.
Condition of fittings and brackets varies with visible surface dust and dirt present.

APV Plate Heat Exchanger FP14 2009

Skylarc Ref M109910

Manufacturer APV New Zealand Ltd
Type FP14
Year 2009
Serial Number 060606 8292
Drawing Number N0714
Heat transfer surface area not specified
Working pressure 6 bar
Test pressure 10 bar
Maximum working temperature 101°C
Nominal capacity not specified
Installed on a metal support frame
Two flanged pipe connections visible
One side fitted with a pipe and a rusted component

WEG W22 High Efficiency Electric Motor 3-160L

Skylarc Ref O109912

WEG W22 High Efficiency electric motor.
Model TEFFOXC.
Type 3-160L.
Date of manufacture 14JUN2017.
IP66 enclosure rating.
Insulation class H.
Service factor 1.15.
Ambient temperature 40°C.
Rated output 18.5kW at 50Hz.
RPM at 50Hz: 2945/2935/2945 depending on voltage.
Voltage 380V/400V/415V at 50Hz.
Current at 380V: 33.1A.
Shaft and flange visible on drive end.
Equipped with winding temperature detector (thermistor/ PTC, max voltage 2.5Vdc).
Connector plug attached to power cable.
Supplied on a metal mounting tray.
Bearing types: 6309-C3 and 6208-C3.
Made in Brazil.

Zurn Wilkins Backflow Preventer with Valve Assembly

Skylarc Ref P109913

Zurn Wilkins backflow preventer body is included.
Marked with 75 PSI on main housing.
Valve handwheel is present.
Assembly includes a manual valve with handwheel marked L41223.
Housing and valve marked with AS2638.2 LIC20171.
Body features flanged ends for pipe connection.
Assembly contains additional piping and vent valve.
Flow direction is indicated by an arrow on the body.

Magnattack Model 180/SP100-E Magnet Separator

Skylarc Ref R109915

Magnattack Global magnet separator.
Model number 180/SP100-E.
Serial number 1605/11331-A.
Stainless steel construction.
Unit mounted on a metal base with upright support arm.
Horizontal in-line entry and exit ports.
Fitted with electrical cable and multi-pin connector.
Detached green earth wire visible at cable end.
Funnel inlet at top of separator.
No additional accessories included.

Vortex Stainless Steel Industrial Fan Housing Assembly

Skylarc Ref T109917

Stainless steel construction.
Includes round intake and rectangular outlet sections.
Box section contains fan mounting and connecting hardware.
Label on housing reads Vortex.
Appears designed for industrial air handling or dust extraction.
Includes removable inspection cover on top of the circular section.
Unit is shown mounted on a wooden pallet.
Orange plastic tray with loose fasteners attached to assembly.
Fan impeller visible inside the housing.
No drive motor or wiring is present.
Dimensions not specified.

HSC Hydraulic Systems & Components Power Unit with GEC Motor

Skylarc Ref V109919

Hydraulic power unit by HSC Hydraulic Systems & Components
GEC electric motor model B.100.LA4/GC installed
Motor rating is 2.2kW
Motor rated for 1430 rpm at 50 Hz
Motor voltage 400V Y connection or 230V delta connection
Motor current 5.0A at 400V or 8.7A at 230V
Motor insulation class F
Motor protection class IP55
Plug is a 4-pin industrial connector
Steel hydraulic tank included
Hydraulic pump and hoses attached
Change interval label from hsac.co.nz on tank
Motor manufactured by GEC (NZ) Ltd

Lot of Keystone Pneumatic Actuators and Stainless Valves

Skylarc Ref Y109922

Bulk lot of pneumatic actuators and stainless steel piping components.
Includes multiple Keystone pneumatic actuators with visible branding.
Assorted stainless steel pipes and fittings are present.
Several solenoid valves and ball valves are included.
Components include various lengths and diameters of pipe.
Parts include some wired and non-wired actuator units.
Items are loose and contained in a large white bulk bag.
Quantity and exact specifications of items are not identified.
All items shown are included in the lot.

Pallet of Keystone F783 Actuators and Control Units

Skylarc Ref Z109923

Pallet contains multiple Keystone F783 actuators.
Actuators are stainless steel bodies with black plastic end caps.
Wiring is attached to some units.
Bag includes at least two blue and beige electronic control boxes.
Keystone branding visible on actuator housings.
Units appear to be untested.
All items are contained within a large white bulk bag on a pallet.
No further accessories or documentation included.

Robuschi Pump System with Stainless Steel Tank and Pipework

Skylarc Ref B109925

System includes two Robuschi pumps.
Each pump is labelled as Pump #1 and Pump #2.
Pumps are mounted on a stainless steel frame.
System contains a stainless steel tank with an inspection hatch.
Pipework is comprised of stainless steel components.
Two large black cylindrical housings are mounted on top of the system.
Both pumps have attached valves and pipe fittings.
Stainless steel box housings are fitted at the end of the frame.
There is an electrical power inlet on one side of the system.
No information provided about model numbers or capacity.

Iplex Novadrain 16000 DN150 PVCU DWV Pipe with Bend

Skylarc Ref D109927

Iplex Novadrain 16000 DN150 PVCU DWV pipe
SN16 rating
Fully recyclable PVC material
Made in New Zealand
AS/NZS 1260 compliance
Pipe includes a 90-degree bend fitting
Pipe exterior is light grey
Manufacturer marking: SMKP20184

WEG Electric Motor and Gearbox with Chain Conveyor

Skylarc Ref G109930

WEG electric motor mounted on gearbox with conveyor attachment
Motor model 3-90L 280UT03 GIG4916
Motor rated for 1.5 kW at 50 Hz and 1.8 kW at 60 Hz
Voltage ranges: 220V Delta, 380V Star, 230V Delta, 400V Star, 415V Star, 440V Star
Speed ratings: 1410 rpm at 50 Hz and 1705 rpm at 60 Hz
IP55 rated motor enclosure
Polyrex EM-ESSO bearings 6205-ZZ and 6204-ZZ
Gearbox and chain conveyor mounted on steel base
Heavy-duty chain included on conveyor assembly
Power cable attached to motor
Metal nameplate visible on gearbox but partially unreadable
Motor manufactured by WEG, Made in Brazil

Stainless Steel Storage Tank

Skylarc Ref H109931

Stainless steel cylindrical storage tank
Horizontal orientation
Multiple inlet and outlet pipe fittings
Manway access hatch on one end
Internal surface polished stainless steel
External surface stainless steel
Reinforced support legs attached
Approximate diameter visually estimated at around 2 metres
Approximate length visually estimated at around 3 metres
Various fitting ports on tank ends
No identification plate visible in images

Assorted Stainless Steel Fittings and Parts

Skylarc Ref O168319

Lot includes multiple stainless steel pipe fittings.
Contains various bends elbows and flanges.
One large stainless steel cylinder with attached pressure gauge is included.
Blue plastic bin contains assorted metal couplings clamps and a hand tool.
Red bin contains additional stainless parts and a green plastic watering can.
Includes a metal housing containing nuts bolts and blue plastic pipe connector.
Various metal tubing sections are present.
Includes a blue bin with further steel fittings and lubricant tube.
White plastic sheet or panel included.
All items are in mixed used condition.
Quantity and exact specifications of each part are unspecified.

Pallet of Industrial Parts and Electrical Enclosure

Skylarc Ref N168318

Pallet includes multiple steel wire cables in various sizes
Several industrial rubber hoses are included
Contains various boxes of small mechanical or spare parts
Assorted orange polyurethane couplings and black spider couplings are present
Wrenches and other hand tools are visible in the pallet
A plastic bin and cardboard boxes are included
One grey metal electrical enclosure box is included
The enclosure has three control switches mounted on the face
Black mounting plate is shown on top of the enclosure
All items are shrink wrapped together on a single pallet
Exact quantities and specifications of parts are not confirmed
Items are mixed industrial and mechanical components
No further details available

Industrial Stainless Steel Scrap and Parts Bin

Skylarc Ref Q109940

Metal bin containing mixed industrial stainless steel parts.
Assortment includes tubing sections, flanges, and angled steel panels.
Multiple steel valves and fittings are visible in bin.
Assorted sheet metal and brackets included.
Components appear to be cut or removed from processing equipment.
Material in bin consists largely of stainless steel with visible rust on some items.
Bin is mesh steel construction with open top and metal framework.
Contents as shown in photographs only.
Estimated bin dimensions are approximately one cubic metre.
No further specifications or part numbers confirmed.

Techtop TAI 71B-4 Electric Motor with Gearbox

Skylarc Ref M168317

Techtop electric motor type TAI 71B-4
Duty S1
IP55 rated
Manufactured in 2019
IEC60034-1 compliant
Motor weight 6.1 kg
IM B5 mounting
Voltage 415V 50Hz 0.37kW 1.06A 1400rpm
Voltage 230/400V 50Hz 0.37kW 1.79/1.04A 1390rpm
Voltage 440/480V 60Hz 0.40/0.44kW 1.02A 1685rpm
Efficiency 69.5 percent
Bearing DE 6202 ZZ C3
Bearing NDE 6202 ZZ C3
Supplied by Techtop Australia Pty Ltd
Gearbox attached
Gearbox flange mounting
Gear shaft visible on output side
CE marked

Lot of Coaxial Cables with SMA Connectors

Skylarc Ref E168309

Lot consists of multiple coaxial cables.
Cables appear to be bundled in zip ties.
Cables are black in color.
Cables have SMA male and SMA female connectors with gold plating.
Boxes labelled as 3015 Qty 20 are present.
Cable lengths are not specified.
Quantity of cables is not individually stated but multiple bundles are visible.
No manufacturer or model number is visible.

Tridonic ATCO TX0650FPE-01 Isolating Transformer

Skylarc Ref D168308

Model TX0650FPE-01
Serial number 34599
Input voltage 230V
Output voltage 230V
Rated power 0.65 kVA
Frequency 50/60Hz
Single phase
For indoor use only
Isolating transformer
Primary fuse 1 x T3.15A
Standard IEC 127-2 Std. Sht. 5 AS/NZS61558
Manufactured by ATCO Controls Ltd
9 Aintree Avenue, Mangere, Auckland
www.tridonicatco.co.nz
Calibration sticker present
Calibration Connect ID Transformer 05
Cert. No. 20388
Calibrated 4 Feb 2016
Next calibration due 4 Feb 2017
IEC power input socket
one standard NZ power outlet
Plastic carry handle on top of enclosure

Restran Isolating Transformer 1kVA 230V

Skylarc Ref C168307

Manufacturer is Resistor Winders (New Zealand) Limited.
Model is Restran Isolating Transformer.
Serial number is 9859.
Input is 230V 50Hz.
Output is 230V 50Hz.
Rated at 1kVA.
Rated at 4.4 amps.
Unit is built to NZSS 1379 Class 11 non-splashproof standard.
Unit contains no earthed parts.
Supplied by a 2-wire cord.
Fitted with a fuse and cut out as protection against overload.
To reset overload disconnect from mains and allow to cool.
Handle attached on top for carrying.
Single NZ-style mains plug.
Manufactured in Stokes Valley, New Zealand.

Transcor Transformer AZ42 New Zealand Transformers Ltd

Skylarc Ref B168306

Manufacturer New Zealand Transformers Ltd
Model Transcor Transformer
Type number AZ42
Serial number 30798
1 KVA Rating
Single phase 50 Hz
High voltage input 230V
Low voltage output 115V
High voltage input current 4.4A
Low voltage output current 8.7A
Output socket marked Ring-Grip 250V
Class 2 transformer
Non splash rated
Compliance with NZS 1379
Supplied with a 2-wire cord
This unit contains no earthed parts
Carry handle installed
Fitted with two-prong mains plug
Calibration label present from Calibration Connect Ltd

Bulk Cable Lot: 0.75mm² 2-Core, 7/1.15 4C TYCO, Amphenol T660-LTVB

Skylarc Ref X168302

Lot includes three cable spools.
First spool is marked 0.75mm² 2-core screened cable.
Conductors are red and white with copper screening braid.
Second spool is TYCO 7/1.15 4C TAC PVC BLK PBF cable.
Label on spool shows quantity is 500 metres when full.
Cable on second spool contains four colour-coded conductors.
Third spool is TFC Amphenol T660-LTVB cable.
Amphenol spool label indicates 305 metres when full but remaining cable states 193 metres remaining

Mixed Cable and Wire Spools Lot

Skylarc Ref W168301

Lot includes multiple cable and wire spools.
Aflex Cables 2x2x0.5mm² code HCP602 on blue spool.
One spool marked 4-core 0.2mm² cable.
Kacool Cable 2mm² brown cable on Powercentre Industries Ltd spool.
Dynamix C-RJ11 R102 spool with 100m 6 wire flat cable, colour black.
Spool marked C-RJ11-4 R103 with 100m 4 wire flat cable, white.
Spool labelled Homelan 1/51 2PR PAC PP PVC WHI, 100m white cable.
Maser labelled spool cat no B8134, 50m cable present.
Cable constructions visible in photos.
Copper conductors visible in most cables.
Insulation colours and core quantities visible for several cables.
Some spools partially used.

Eagle Automatic Pocket Welting Machine Brother LT2-B831-3

Skylarc Ref U110100

Automatic pocket welting machine.
Model LT2-B831-3.
Manufactured by Brother Industries Ltd.
Control panel labeled Eagle Industry Co. Ltd.
Sequence indicator panel with carriage feed controls and emergency stop.
Reducing counter and seam length adjustment on main control panel.
Thread trimmer and stacker toggle switches present.
Operation select dial for sewing, center knife, and corner knife functions.
Sewing head made in Japan by Brother Industries Ltd.
Electrical requirement 20A 500V as per attached plug.
Machine table includes integrated controller units.
Input and output panel with power switch and connection ports.
Mounted on a steel frame with cabinet and foot pedal.

Veit 4430-2 Absaugbügeltisch Ironing Table

Skylarc Ref V110101

Manufacturer: Veit KG Bekleidungstechnik
Model: 4430-2 Absaugbügeltisch
Serial number: 01891
Year of manufacture: 1981
Voltage: 220V
Frequency: 50Hz
Rated power: 0.28kW
Current: 1.27A
Weight: 50kg
Equipped with Veit 7905 component
Fitted with brown padded ironing surface
Includes integrated suction platform
Plug type and power cable shown in images
Physical switch and indicator lamp on front panel
Control lever located on the front side
Heating power specification not marked on label
Manufacturer location: Landsberg-Lech, Germany
Warranty card in German language included

Juki DLN-5410-6 Industrial Sewing Machine

Skylarc Ref X110103

Juki DLN-5410-6 industrial sewing machine
Equipped with Juki SC-120 control panel
Table included with machine
Pedal operated foot control
Includes thread stand
Juki made in Japan
Three-pin industrial plug fitted
Power cord present
Maintenance log indicates recent check of presser bar and throat plates
Control panel includes function switches and dials
Motor and drive components visible beneath table

PFAFF 437-6/41-BS Industrial Sewing Machine

Skylarc Ref Y110104

PFAFF 437-6/41-BS industrial sewing machine.
Mounted on a standalone table with caster wheels.
Features a Ho Hsing Servo motor system with electronic controls.
Servo control box is labeled Attwood Electronics Ltd, Auckland.
Includes thread stand with spool holders.
NZ standard three-prong electrical plug is attached.
Uses needle system 135x5 as marked on the machine.
Integrated foot pedal for operation.
Power and operation wiring present under the table.
No accessories or manuals shown.

Yamato AZ8500-C5DA Industrial Sewing Machine

Skylarc Ref Z110105

Yamato AZ8500-C5DA industrial sewing machine is included.
Table with attached sewing light is included.
Four thread spool stands are on the table.
Clutch motor is mounted under the table.
Foot pedal is connected to the machine's operation.
Yamato Sewing Machine MFG Co Ltd Japan is listed as the manufacturer.
Electrical leads for lamp and machine are visible.
Manual thread tension adjustment dials are present on the front.
No accessories or manuals are supplied in the listing.

Siruba DL7000-NH1-13 Industrial Sewing Machine

Skylarc Ref A110106

Siruba DL7000-NH1-13 industrial sewing machine
Manufactured by Kaulin MFG. CO. LTD.
Equipped with Siruba L-90A control panel
Table with integrated sewing lamp included
Foot pedal control unit marked Siruba
Thread stand with two spool positions
Model marked as DL7000-NH1-13 on the identification plate
CE conformity marking present
MFG NO. 880594 shown on the label
Power switch located on the machine head
Multiple control buttons for operating functions
Large work surface suitable for industrial applications

Singer 591UX320GF Industrial Sewing Machine

Skylarc Ref B110107

Singer industrial sewing machine
Model 591UX320GF
Cat No. 1955
Includes electronic stitch pattern controller P/N 419030
Foot pedal control
Mounted on metal frame table with castors
Includes two thread spool stands
Table has wood trim edges
Sewing patterns displayed on controller unit
Power cord and switch mounted under table
Includes thread catcher bag
Made in Japan

Collar Facing Press

Skylarc Ref C110108

Collar facing press for garment or textile applications
Includes integrated table with metal frame
Equipped with padded upper pressing form
Side metal tray attached to table
Fitted with wired electrical power cord
Standard New Zealand three-pin power plug
Main unit enclosed in a metal housing
Control switch mounted on lower frame

Brother DB2-B737-413 Mark II Industrial Sewing Machine

Skylarc Ref D110109

Brother Industries Ltd model DB2-B737-413 Mark II.
Made in Japan.
Brother Exedra E-40 control panel installed.
Includes table with mounted controls and ruler.
Foot pedal and knee lever attached to stand.
Multiple control buttons and indicator lights visible on E-40 head unit.
Power input and cabling mounted under the table.
Various attachments and a lamp are included and shown on the table.

Durkopp Adler 274 140042 AP Industrial Sewing Machine

Skylarc Ref E110110

Durkopp Adler industrial sewing machine.
Type 274 140042 AP.
Serial number 590598.
Made in Germany.
Includes integrated control panel model V720.
Fitted with a 20A 500V 3-pin plug (Cat No 56P420).
Standalone unit with dedicated table and foot pedal.
Power and pneumatic connections present.

Brother DB2-B715-903 Plain Sewer and Overlocker Table Unit

Skylarc Ref F110111

Brother DB2-B715-903 industrial sewing machine installed on table.
Industrial overlocker machine installed on same table.
Table fitted with thread stands and metal frame on wheels.
Both machines powered by under-table electric motors.
Two separate pedal controls attached to each motor.
Main power plug is 20A 500V PDL branded industrial type.
Brother DB2-B715-903 serial number 1020 visible on ID tag.
Control boxes for both machines mounted beneath the table.
Thread guides and spare thread spool holders included on table.
No accessories or manuals included in photos.

Siruba DL7000-M1-11 Industrial Sewing Machine

Skylarc Ref H110113

Siruba model DL7000-M1-11 industrial sewing machine
Manufactured by Kaulin Mfg. Co. Ltd
Machine includes Siruba L-90A control panel
Pedal operation
Mounted on a metal frame table with casters
Two spool holders and thread guides attached
Electrical cord visible with standard plug
Includes flat working table with wooden extension
No documentation of accessories or attachments included

Juki DDL-9000SS Sewing Machine

Skylarc Ref J110115

Juki Corporation DDL-9000SS industrial sewing machine
Made in Japan
Table included
Foot pedal included
CP-160 control panel attached
Dual spool holders installed
ON and OFF power switch mounted on the table
230V 50Hz lamp included
Three pin industrial power cable

Brother Industries EF4-B511 Industrial Sewing Machine

Skylarc Ref K110116

Brother Industries Ltd. model EF4-B511 sewing machine
Made in Japan
Industrial overlocker configuration
Machine is table mounted
Includes thread stands for multiple spools
Has a lamp with bulb mounted to the table
Fitted with a foot pedal control
Equipped with a motor mounted beneath the table
On and off switch mounted on the front right side of the table
Supplied with a three-prong plug
Physical condition and included items as per photos

Juki DDL-5550N-7 Industrial Sewing Machine

Skylarc Ref L110117

Juki DDL-5550N-7 industrial sewing machine.
Made in Japan.
Mounted on a dedicated sewing machine table with a ruler attached.
Includes attached motor and control box under the table.
Fitted with a dual cone thread stand.
Fitted with a 3-pin electrical plug rated at 250V.
Serial number: J14277.
Foot pedal attached to base.

Juki DDL-5550N-7 Industrial Sewing Machine

Skylarc Ref N110119

Juki DDL-5550N-7 industrial sewing machine.
Made in Japan.
Unit includes integrated table.
Built-in motor located under the table.
Power cable and plug visible.
Table features an extended wooden side panel.
Machine head serial number LYM5C931.
Two spool holders at rear of table.
Lamp attached to sewing area.
Includes attached pin cushion on machine head.
Dual power outlets mounted on frame base.
Model and manufacturer plate on machine body.

Fuji MP-1022 Industrial Fusing Machine

Skylarc Ref O110120

Fuji MP-1022 fusing machine.
Control panel includes power switch, lamp indicator, fusing time dial, time switch dial and thermostat.
Manufactured by Fuji Machinery Export Ltd.
Voltage 220V 50/60Hz.
Rated current 9A.
Rated power 2.0kW.
Driving motor power 25W.
Heater power 2010W.
Serial number 49186.
Unit branded by Stitching Equipment (S.I.) Ltd.
Table and two metal attachments included.

Pegasus E32-430 Industrial Overlocker Sewing Machine

Skylarc Ref P110121

Pegasus industrial sewing machine.
Model E32-430.
Specification 516-233-5X5.
Mounted on a work table with metal frame.
Includes attached lamp unit.
Fitted with a standard 3-pin plug for 230V power supply.
Comes with multi-spool thread stand.
Foot pedals included for machine operation.
Power extension cord with multiple sockets is present.

Meyer RPS-Junior Fusing Machine

Skylarc Ref Q110122

Manufacturer: Maschinenfabrik Herbert Meyer GmbH
Model: RPS-Junior
Type: RPS-M 1400
Manufacture year: 1994
Main voltage: 415V three phase AC
Control voltage: 220V AC and 24V DC
Frequency: 50 Hz
Main current: 36A
Maximum fuse current: 50A
Power: 25kW
Control unit: Meyer Metronic 500
Includes control panel with temperature, speed, and pressure controls
Five pin three phase plug
Documents and manuals included
Made in Germany

Strobel Blind Hemmer Sewing Machine

Skylarc Ref R110123

Strobel blind hemmer sewing machine.
Model number: K1074 140F.
Country of origin: Western Germany.
Table-mounted unit with integrated controls.
Pedal-operated.
Includes attached electric motor and power cables.
Compressed air hose attached.
Machine identification and patent plate present.
Wooden table surface included.
No accessories apart from those pictured are included.

Veit 4413-1 Absaugbügeltisch Vacuum Ironing Table

Skylarc Ref S110124

Manufacturer Veit KG Bekleidungstechnik
Model 4413-1 Absaugbügeltisch
Serial number 8421
Year of manufacture 1981
Rated voltage 380V
Frequency 50Hz
Rated power 0.55kW
Current 0.84A
Weight 60kg
Ironing table features three padded arms
Power connection is a three-phase plug
Main switch and control lever present on front panel
Label with manufacturer address 8910 Landsberg-Lech Germany
Exhaust hoses attached on side of base unit
Heating power specification not provided on the manufacturer plate

Vacuum Dust Collector Unit

Skylarc Ref T110125

Vacuum dust collector unit with metal cabinet construction
Single front door with transparent window and handle
Main compartment contains a dust filter mounted on a vertical pipe
Removable lower drawer for dust collection
Fitted with a power cable and three-prong plug
Mounted on four caster wheels for mobility
Power switch located on rear lower panel
Label on unit references vacuum use for shirts
Japanese instruction label for filter cleaning located on front
No model number or manufacturer details visible

Shirt Folder Machine

Skylarc Ref U110126

Shirt folder machine designed for use in garment processing.
Integrated metal frame with textile-covered work surface.
Unit includes control switches and adjustment levers mounted underneath the table.
Lower shelf provides additional storage.
Electrical input features a three prong plug and attached power cable.
Main control panel and mechanism located beneath work surface opening.
Includes pneumatic connection with attached red air hose.
Used condition indicated.

Siruba DL7200-BM1-15 Industrial Sewing Machine

Skylarc Ref V110127

Siruba DL7200-BM1-15 industrial sewing machine.
Manufacturing number 920Y034009.
Made in China.
CE marked.
Table with built-in ruler included.
Onboard keypad and adjustment dial for operation control.
Needle type is 16x231 as indicated on the machine.
Power cable and foot pedal included.
Integrated task lamp attached to table.
Maintenance log present showing service history.
Most recent service entry is 23-5-24 for cleaning and oiling.

Juki DDL-555-5 Industrial Sewing Machine with MC-210 Controller

Skylarc Ref W110128

Juki DDL-555-5 industrial sewing machine.
Juki MC-210 controller attached.
Single needle machine.
Table included in setup.
Foot pedal operated.
Original Juki electric motor mounted below table.
Three-pin industrial electrical plug fitted.
Manufactured by Tokyo Juki Industrial Co. Ltd.
Made in Japan.
Sewingtime (N.Z.) Ltd. ruler fixed to front edge of table.

Union Special 56300R Industrial Sewing Machine

Skylarc Ref X110129

Union Special industrial sewing machine
Model 56300R
Made in USA
Machine is mounted on a work table
Includes attached thread stand
Fitted with dual foot pedals
Motor integrated beneath table
Includes in-table task lamp

Siruba DL7000-NM1-11 Industrial Sewing Machine

Skylarc Ref Y110130

Siruba industrial sewing machine
Model DL7000-NM1-11
Manufactured by Kaulin MFG. CO. LTD
CE marked
Includes control panel model L-90A
Mounted on workstation table with ruler markings
Integrated foot pedal
Thread holder and bobbin stand attached
Machine serial number 27365200

Juki DDL-8500-7 Industrial Sewing Machine

Skylarc Ref Z110131

Juki DDL-8500-7 industrial sewing machine.
Model plate: DDL-8500-7.
Manufactured by Juki Corporation Tokyo Japan.
Manufacturing number: 4DOSC06919.
Includes industrial table with integrated ruler on the front edge.
Foot pedal operation.
Equipped with thread spool holders attached to the table.
Control panel with power switch mounted on the table.
Standard three-prong plug rated for 230-240VAC 10A.
Machine head is mounted in a light wood laminated table.
Motor and wiring mounted under table surface.
Yellow catch bag attached to the side of the table.

Brother CB3-B917-1 Button Sew Machine

Skylarc Ref A110132

Brother CB3-B917-1 industrial sewing machine
Button sew type
Manufacturer: Brother Industries Ltd
Made in Japan
Mounted on work table with caster wheels
Fitted with adjustable lamp
Includes thread holder
Power switch fitted to table
Serial number 1024 on machine plate
Control pedal fitted to base

Brother LK3-B430-6 Industrial Sewing Machine

Skylarc Ref B110133

Brother Industries Ltd model LK3-B430-6 sewing machine
Made in Japan
Includes metal work table
Machine is mounted to wood top with steel frame base
Integrated foot pedal present
Task light included and attached to table
Thread holder stand attached to rear left of table
Belt and pulley mechanism at rear of machine visible
Serial number visible on machine badge
Power switch and electrical wiring visible on table

Siruba DL7000-H1 Industrial Sewing Machine

Skylarc Ref C110134

Siruba DL7000-H1 industrial sewing machine
Manufactured by Kaulin MFG. CO., LTD
Model DL7000-H1-13
Includes control panel model Siruba L-90A
Mounted on wheeled steel frame table
Foot pedal included
Thread stands included
Power cord attached
Ruler integrated on tabletop
Serial number 26396855

Siruba DL7000-NH1-13 Industrial Sewing Machine

Skylarc Ref D110135

Siruba industrial sewing machine model DL7000-NH1-13
Kaulin Manufacturing Co Ltd
Electronic control panel model L-90A
Machine includes two thread stands
Mounted on rolling table frame
Foot pedal included
Power cable attached
Integrated accessory tray
Manufacturing number 128362790

New Zealand Steam Press

Skylarc Ref E110136

Industrial steam press identified as New Zealand Steam Press.
Large pressing surface with padded upper and lower plates.
Equipped with four foot pedals for operation control.
Includes metal base and support structure.
Hydraulic or steam piping connected to main body.
Wooden work table attached surrounding the pressing area.
Manual adjustment mechanism located on upper arm.

Ibis Steam Press

Skylarc Ref F110137

Ibis steam press unit
Floor standing design
Manual controls with two black levers
Wooden pressing table with cutout
Metal frame construction
Steam piping visible under table
Ibis logo on front panel
Press head with fabric cover
Pedal at base for operation
Electrical and steam connections visible
No visible model number or serial number
No additional accessories shown

IBIS Hoffman Steam Press Isaac Braithwaite & Son Model MXGZ45RH

Skylarc Ref G110138

IBIS Hoffman steam press.
Manufactured by Isaac Braithwaite & Son Engineers Ltd Kendal.
Model MXGZ45RH.
Serial number 230079.
Supplied by H.A. Tuck & Co. Ltd Auckland and Wellington.
Press designed to carry not in excess of 40 lbs steam pressure.
Three oiling points on the machine are noted for required maintenance.
Large cast body with integrated steam connections visible.
Includes fitted upper and lower pressing forms.
Operation by foot pedals.
Displays IBIS Hoffman branding on body.
Manufacturing plate and warnings fixed to main base.
No further accessories or documentation are included.

Hoffman IBIS Isaac Braithwaite & Son Industrial Steam Press Machine

Skylarc Ref H110139

Hoffman IBIS industrial machine
Manufacturer: Isaac Braithwaite & Son Ltd
Serial number: 230080
Made in Kendal, London
Foot pedal operation
Integrated pad and work surface
Metal construction
Control valve on side of machine
Bench-mounted design
No further specifications supplied

Hoffman IBIS Steam Press by Isaac Braithwaite & Son

Skylarc Ref I110140

Hoffman IBIS steam press.
Manufactured by Isaac Braithwaite & Son Engineers Ltd.
Location of manufacturer: Kendal, London.
Registered IBIS trade mark.
Designed for a maximum of 80 lbs steam pressure.
Model and serial numbers are stamped on the name plate.

Horscroft MGU47C Steam Press

Skylarc Ref J110141

Manufactured by L. Horscroft Pty Ltd.
Model MGU47C.
Serial number 4635.
Industrial steam press with foot pedal operation.
Fitted with connections for steam and vacuum operation.
Integrated table surface.
Steel and cast construction.
Control fittings visible on left side of machine.
Includes upper pressing plate with fabric cover.
Requires external steam supply.

APC Smart-UPS Units and Assorted Electronics Pallet

Skylarc Ref L110143

Pallet includes five APC Smart-UPS units.
APC Smart-UPS units have instructions for installation and setup on front panel.
AC power cables and grey hoses are present on the pallet.
Box contains assorted wired devices and bubble-wrapped metal items.
Multiple Verifone card payment terminals are included in a box.
Box contains a variety of AC adapters and power supplies.
Plastic container includes additional power adapters and cables.
Box contains wired headsets and antenna-related components.
Label indicates contents for making custom lengths of comms cable for external RFMesh units (4-core).
Multiple cardboard boxes with unspecified contents included on pallet.

Lot of Industrial Networking Equipment and Accessories

Skylarc Ref M110144

Includes Westermo industrial data communication device in original box
Includes NetComm N300 Dual ADSL2 Plus 3G Wireless N Gateway in box
Moxa NPort 1240 serial device server included
Box of multiple industrial antennas included
Includes several boxes marked with 12V 1.2A Moxa power adapters
Plastic enclosure in cardboard box included
Assortment of cables and hardware in plastic bins
Multiple sealed and unsealed cardboard boxes with unidentified contents
Power supplies and mounting brackets visible

Pallet of Electrical and Electronic Parts and Components

Skylarc Ref N110145

One pallet containing multiple boxes of electrical and electronic parts and components
Box of assorted toggle switches in bags
Box containing HWR Contactor Mains ON/OFF switch units
Enclosures and metal boxes with cables attached
Box of assorted metal brackets and clamps
Box of grey painted metal mounting brackets
Box with multiple SMD Fuse Kit 469 3 x Bus Bar Fuses 3 x 16A Links
Box with cable assemblies and power cords
12V Medical PSU visible in cable box
Assorted terminal blocks and connectors in cable box
Plastic parts with metal latches
Boxes labelled FIBOX and Powerbase are present

15mm Aluminium Sheet Offcuts

Skylarc Ref Q110148

Pallet containing aluminium sheet offcuts.
Sheets are wrapped in clear plastic film.
Variation in sheet sizes and shapes.
Some surface dirt and residue visible on packaging and material.
Material appears to be unfinished aluminium.
Quantity of sheets as shown in photos.

Industrial Stainless Auger Bin

Skylarc Ref W109946

Industrial Stainless Auger Bin.
Item appears custom built.
A Danfoss VLT Aqua Drive Unit is mounted on one side.
Previously used in a gelatine factory as gelatine residue still on and within unit.
Mounted on castors but unit seems to heavy for castors to roll properly.
See photos for further design details.
NOTE that this unit is beyond the lifting capabilities of our forklifts so buyer must bring equipment capable of lifting an estimated 3500kg or heavier unit.