DART ENGINEERING QUEENSTOWN LIQUIDATION AUCTION

2017 Durma 200 Ton Press Brake

$75,555

Sold 24/05/2026

Skylarc Ref V175533

Model: Durma PBF 30200
Three phase
3050mm bending width
200 ton capacity
210mm stroke
Max pressure 290 kg/cm2
Durma DT-10 NC controller
Foot controller
Light guards
Assorted tooling and V blocks
Tidy machine
You will need your own lifting equipment to load this machine

2019 Tandem Axle Welder Generator and Compressor Trailer

$50,100

Sold 24/05/2026

Skylarc Ref R175555

2019 Load Runner enclosed tandem axle trailer
Electric brakes.
50mm tow ball
Aluminum panel sides and roof
Lincoln Dual Maverick 450 welder generator
277 run time hours
2 x single phase 15 amp outlets
20 amp three phase outlet
3 cylinder diesel engine
450 amp welding output
Lincoln Electric LN-25 pro suitcase wire feed
MIG gun
Gouging torch
Long negative electrode cables
Air Command LT100 4hp three phase compressor
Retractable air hose reel
1900mm x 1720mm front room with shelving and cupboards
Registration expired 01/11/2025
WOF expires 22/07/2026
Exceptionally tidy unit ready to go

2018 Mantall 10 Metre Scissor Lift

$10,310

Sold 24/05/2026

Skylarc Ref W175534

Model: Mantall XE100W Aerial Work Platform
8 metre lift
Manufactured 2018
Extending platform
135 hours on clock
Single phase built in charger
Certification expired 20-02-2026

ACL Metal Cutting Guillotine

$10,000

Sold 24/05/2026

Skylarc Ref J175573

Model: ACL 62500X
Three phase
6mm x 2500mm cutting capacity
Electric back gauge
Foot controller
Rear guards and front guards
Hydraulic material hold downs
Runs well but needs safety switch adjusted so the guard keeps it engaged
Steel materials frame over guillotine included
You will need your own lifting machinery to load this machine.

3 Metre Metal Lathe

$9,850

Sold 24/05/2026

Skylarc Ref T175531

Model: ZC600
3000mm between centers
600mm swing over bed
Approx 800mm swing over gap
102mm spindle bore
395mm long removable gap
12 spindle speeds
19 - 1200rpm
Metric and imperial thread cutting
Taper cutter
Fixed steady
Rapid traverse (not functioning)
320mm three jaw chuck
400mm four jaw chuck
Chuck guard (not fitted)
Quick change tool post
11 x tool holders and some tooling
Eason ES-1 DRO (shows battery failure)
Coolant pump
We can assist with moving the machine out of the room it's in, but you will need a hiab or similar to load it.

1995 2.5 Ton Toyota LPG/Petrol Forklift

$7,000

Sold 24/05/2026

Skylarc Ref B175513

Toyota fork lift truck
Model 02-6F G30
Type FSV 5500
2.5 ton capacity
Frame number 6F G30-10985
Production year 1999
Lifting height 4000 mm
Truck weight 4430 kg
Mast with side shift
Hour meter shows 18797 hours
Solid tyres
ROPs cab
Petrol/LPG but we've only run it on petrol

Three Phase Lathe

$5,550

Sold 24/05/2026

Skylarc Ref U175532

Model: CY-L1640G
Three phase
Swing over bed: 410mm
Swing over cross slide: 250mm
Swing in gap: 580mm
Distance between centres: 1000mm
52mm spindle bore
16 spindle speeds
33 - 2000rpm (gearbox fault)
Metric and imperial thread cutting
Morse taper No.4 tailstock
5.5kW main motor
250mm three jaw chuck
250mm four jaw chuck
Traveling steady
Fixed steady
Quick change tool changer
3 x tool holders
Sony DRO (powers up but no numbers)
Machine has a gearbox fault and won't engage, some speeds are marked as non functional and the speed range selection lever is locked.

Nantong Three Phase Milling Machine

$5,105

Sold 24/05/2026

Skylarc Ref S175530

Model: Nantong X6330
Three phase
T slot table dimensions 1390mm x 300mm
Spindle speeds 65 - 4760rpm
Power feeds X and Z axis
120mm spindle travel
Includes 200mm mill vice
Indexing head

BOC Smootharc Advance II 555R MIG Welder

$4,060

Sold 24/05/2026

Skylarc Ref Y175536

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 1 phase 420V 50 or 60Hz.
Duty cycle up to 550A
Trolley mounted power source with wheels.
Separate Smootharc Advance II wire feeder unit fitted.
MIG torch attached to feeder.
Gas hose and twin gauge gas regulator attached.
3 phase 32 amp plug

Large Steel Rack and Contents of Steel

$4,020

Sold 24/05/2026

Skylarc Ref X175587

2 x steel racks
5910mm long x 1900mm wide x 3000mm tall each
4 x H-beams 300mm x 310mm x 15000mm
I-beam 190mm x 450mm x 6100m
Channel 180mm x 70mm x 6020mm
H-beam 210mm x 205mm x 6040mm
H-beam 250mm x 260mm x 6030mm
I-beam 150mm x 300mm x 8040mm
H-beam 250mm x 260mm x 5180mm
Assorted rebar and other short lengths
You will need a hiab or similar to load this steel

Three Phase Sheet Metal Rollers

$3,510

Sold 24/05/2026

Skylarc Ref P175527

Unknown make and model
1330mm long x 110mm diameter rollers
Forward and reverse

Soda Blasting Accessories

$3,250

Sold 24/05/2026

Skylarc Ref Z175563

Buster Blaster Soda Works abrasive blasting pot.
Manufactured by The Soda Works Walla Walla Washington USA.
Serial number 6384-01.
Built 2010.
Maximum allowable working pressure 150 PSI at 300 F.
Mounted on wheeled frame.
Includes multiple blue pink and black blasting hoses attached to pot.
Includes blast nozzle assembly attached to hose.
Includes separate vertical cylindrical pressure vessel with hose connections.
Includes Radex breathing air filter unit on green base.
Includes dual fan air cooler unit with pipe manifold and support legs.

20" Dangerous Goods Container

$3,200

Sold 24/05/2026

Skylarc Ref N175551

Grates side and ends
Side opening swing doors
Vertical steel racks inside
Includes steel loading ramp
Gas bottles are NOT included
You will need a hiab or similar to load this container

Large Hydraulic Press

$2,735.50

Sold 24/05/2026

Skylarc Ref Y175510

1000mm between uprights
Adjustable height table
80mm diameter spear
2 large rams
Separate 3 phase hydraulic power pack
Approx 700mm ram travel
Buyer will need to extract from roof covering it

BOC Smootharc Advance II Mig Welder

$2,575

Sold 24/05/2026

Skylarc Ref I175572

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 3 phase 420V 50 or 60Hz.
Duty cycle up to 400A 36V.
Trolley mounted power source with wheels.
Separate Smootharc Advance II wire feeder unit fitted.
MIG torch attached to feeder.
Gas hose and twin gauge gas regulator attached.
3 phase 32 amp plug

Evolution Metal Cutting Chop Saw

$2,565

Sold 24/05/2026

Skylarc Ref I175546

Brand: Evolution Power Tools
Model: S355MCS
Type: 355mm metal cutting chop saw
Blade diameter 355mm
Power rating 2200W
Voltage 220 to 240V 50Hz
No load speed 1500rpm
Mounted on metal trolley table
Caster wheels
Two spare circular saw blades included on lower shelf
Integrated vise and clamping system on saw base
Mitre angle scale on base

BOC Smootharc Advance II Mig Welder

$2,565

Sold 24/05/2026

Skylarc Ref Z175537

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 3 phase 420V 50 or 60Hz.
Duty cycle up to 400A 36V.
Trolley mounted power source with wheels.
Separate Smootharc Advance II wire feeder unit fitted.
MIG torch attached to feeder.
Gas hose and twin gauge gas regulator attached.
3 phase 32 amp plug

Contents of Materials Rack

$2,501

Sold 24/05/2026

Skylarc Ref M175524

Huge variety
Includes:
Aluminum pipe
Steel and stainless pipe
Steel and aluminum box section
Steel and aluminum flat bar
Buyer will need to unload

Cuddon Finger Folder

$2,450

Sold 24/05/2026

Skylarc Ref L175523

Model: Cuddon 45SPL
10 fingers
One missing mounting bracket
2440mm folding width

Scotchman 40 Ton Punch and Shear

$2,115

Sold 24/05/2026

Skylarc Ref K175522

Scotchman hydraulic ironworker machine.
Model 4014 CM.
Serial number 9097K403.
Manufacturer Scotchman Industries Inc Philip South Dakota U.S.A.
Motor power 3 HP.
Voltage 415 V.
Frequency 50 Hz.
Phase 3 phase.
Full load amps 5 A.
Hydraulic pressure 1450 psi.
Blade length 14 in.
Punch station rated 40 tons.
Punch capacity 1.0 in diameter in 0.5 in thick material.
Flat bar shear capacity 5 8 x 6 to 3 8 x 8 in.
Flat bar shear maximum material 16 x 125 mm and 13 x 150 mm.
Angle shear capacity 0.25 x 3 x 3 in leg angle.
Channel shear capacity 3 x 3 x 5 16 in.
Rod shear capacity 0.75 in round and 0.75 in square bar.
90 degree notcher capacity 6 x 6 x 0.25 in.
Press brake attachment
2 x roller tables 2680mm and 1220mm

Lincoln Electric Precision TIG 275

$2,110

Sold 24/05/2026

Skylarc Ref O175526

Lincoln Electric Precision TIG 275 welding power source.
Square wave power source featuring MicroStart technology.
Supports TIG mode and stick mode selection.
Current downslope and postflow controls.
Rated for DC and AC welding as shown on rating plate.
Rated output 310A at 20V DC
Mounted on wheeled base.
Fitted with TIG torch as pictured.
Includes work lead with clamp as pictured.
Contains built-in top storage compartment with assorted TIG consumables
Fitted with Miller Radiator 1A cooling system on top of power source.

Contents of Steel Rack

$1,860

Sold 24/05/2026

Skylarc Ref J175547

Box section steel
200mm x 200mm x 4000mm
200mm x 200mm x 5400mm
2 x 100mm x 100mm x 8000mm
200mm x 100mm x 6400mm
120mm x 120mm x 4760mm
75mm x 50mm x 8000mm
100mm x 75mm x 3350mm
110mm diameter pipe 4520mm
110mm diameter pipe 5500mm
Various other short lengths
Please ensure you bring a suitable vehicle for this load

Anvil on Stand

$1,810

Sold 24/05/2026

Skylarc Ref L175575

Unknown maker (no marks)
Steel stand
With hammer

UNI-MIG KT 50 400S MIG Welder

$1,710

Sold 24/05/2026

Skylarc Ref Z175511

Brand: UNI-MIG.
Model: KT 50 wire feeder and 400S power source.
Type: UNI-MIG KT 50/400.
Made in Hungary.
Welding process: MIG.
Maximum welding current: 400A.
Duty cycle: 100% at 400A (nameplate).
Input voltage to KT 50: 42-48V 50Hz (nameplate).
Remote control voltage: 42-48V 50Hz (nameplate).
Maximum power input to KT 50: 75VA (nameplate).
Recommended wire size range: 0.8-1.1mm
Unit is mounted on a wheeled trolley.

Three Phase Drill Mill

$1,595

Sold 24/05/2026

Skylarc Ref Q175528

Model: Nantong ZX 40
Morse taper No.3 spindle taper
130mm spindle travel
6 spindle speeds
60 - 1500rpm
730mm x 210mm table
850mm tall adjustable height column
Change lever handles missing but changes ok
On steel work table

2 x Uni-Mig Three Phase MIG Welders

$1,533

Sold 24/05/2026

Skylarc Ref H175571

Uni-Mig 425S welders
Model: Uni-Mig KT 50/425
KT50 wire feeds
Three phase
400 amp max welding output
One powers up and the wire feed operates but otherwise untested
Other is dead parts only

BOC Smootharc TIG 200 ACDC Welder

$1,470

Sold 24/05/2026

Skylarc Ref H176429

Brand BOC
Model Smootharc TIG 200 ACDC.
Model code BOCTIG200ACDC.
Input AC 230V 1 phase 50Hz.
Rated input current I1eff 14A.
Maximum input current I1max 25A.
Open circuit voltage U0 60V.
Maximum output current 210A.
Duty cycle 30 percent at 210A.
Duty cycle 60 percent at 148A.
Duty cycle 100 percent at 115A.
Protection class IP21S.
Insulation class F.
Includes TIG torch.
Includes work clamp with lead.
Includes power lead.
NOTE some cable insulation is damaged as shown.
CHINT DZ47-60 D60 400V breaker fitted on rear panel.

Large Hydraulic Pipe Bender

$1,460

Sold 24/05/2026

Skylarc Ref Y175562

Three phase hydraulic pipe bender
Mounted on wheeled stand
Hydraulic pump with tank
Large selection of assorted pipe bending formers
Hydraulic lines disconnected from ram

Double Sided Shelf/Rack w/ Fastening Hardware & More

$1,460

Sold 24/05/2026

Skylarc Ref V176339

Double Sided Shelf/Rack w/ Fastening Hardware, Nuts, Bolts, & More.
Various bolts, nuts, washers, screws and other Fastening supplies, see photos.
Buyer should being extra hands to.help with removing all the bins, boxes as well as the large rack/Shelf unit.
Items are dusty but unused leftover workshop parts stock.

Rack of Fastening Hardware, Nuts, Bolts, & More

$1,430

Sold 24/05/2026

Skylarc Ref W176340

Rack of Fastening Hardware, Nuts, Bolts, & More.
Large steel wall mounted rack over 100x plastic bins with various nuts, bolts, washers and more, see photos.
Hardware appears to be unused but dusty workshop parts stock.
Buyer will need to bring appropriate tools and extra help to remove this very large rack from the wall.

14 Lengths of Box Section Steel

$1,420

Sold 24/05/2026

Skylarc Ref N175525

10 x 100mm x 100mm from 3700mm -
8000mm
2 x 200mm x 200mm x 8000mm
2 x 50mm x 125mm x 8000mm

Eisele Cold Cut Saw with Tables

$1,410

Sold 24/05/2026

Skylarc Ref B175539

Eisele cold saw on steel base
SEC Industrial Machines induction motor fitted
Motor power rating 1.5 kW
Motor speed 1425 rev per min
3 phase
Machine fitted with 300mm blade
Manual rise and fall saw head
Rotating work table with angle scale
Mechanical vice with handwheel clamping
Push button start and stop station on base
Three phase 32 amp plug
Steel infeed and outfeed support tables attached

Strata EZTIG 205ACDC Inverter TIG Welder

$1,330

Sold 24/05/2026

Skylarc Ref W176418

Brand: Strata
Model: EZTIG 205ACDC.
Type: Inverter AC DC TIG welder.
Standard: IEC 60974-1:2012.
Duty cycle TIG at 200A: 18V 40 percent.
Duty cycle TIG at 170A: 17V 60 percent.
Duty cycle TIG at 140A: 16V 100 percent.
Duty cycle MMA at 170A: 26.8V 40 percent
Duty cycle MMA at 140A: 25.6V 60 percent.
Duty cycle MMA at 120A: 24.8V 100 percent.
Protection class: IP23.
Supply: 230V 1 phase 50-60Hz.
Includes TIG torch with lead.
Includes earth clamp with lead.
Includes gas hose connection at rear.
Control panel shows digital amperage display.

Steel Rack and Flat Bar Steel

$1,320

Sold 24/05/2026

Skylarc Ref J175521

4600mm x 1400mm x 2050mm tall steel rack
Assorted flat bar from 75mm to 125mm x 10mm
Lengths up to 6.8m
Buyer to unload steel

Palfinger Hiab Crane Forks

$1,100

Sold 24/05/2026

Skylarc Ref O175552

Kinshofer KM 415-2000 crane attachment.
Palfinger type PZP200VS.
Made by Kinshofer GmbH.
Made in Austria.
Year 2018.
Rated capacity 2000 kg.
Steel construction frame.
Fork style base with two adjustable tines.
Vertical mast with chain and pin locking.
Attachment point with lifting eye at boom end.

2-Leg Lifting Chain Assembly, 7500kg Capacity

$1,010

Sold 24/05/2026

Skylarc Ref Q176464

2-Leg Lifting Chain Assembly.
7500kg 2-leg Capacity
5300kg single leg Capacity.
6200mm length.
13mm chain size.
Certification tag expires 08/08/2026

Heavy Steel Workshop Table Workbench

$1,000

Sold 24/05/2026

Skylarc Ref Z176421

Heavy Steel Workshop Table Workbench.
12mm thick steel plate top.
90x90mm box steel corner legs and upper frame with smaller box steel bracing.
Auction includes the table only.

Heavy Duty Steel Workbench

$920

Sold 24/05/2026

Skylarc Ref G175570

2400mm x 900mm x 10mm thick plate steel top
Cupboard in one end
Record No.6 vice
Box steel frame

Lincoln Electric PowerCraft TIG201 AC/DC Welder w/ Trolley

$895

Sold 24/05/2026

Skylarc Ref R176413

Lincoln Electric PowerCraft TIG201 AC/DC Welder w/ Trolley.
Single phase.
Includes Cabling.
Gas bottle bracket 210mm diameter.

Alpha Pro Shot Laser Level w/ Apache Storm Reciever

$860

Sold 24/05/2026

Skylarc Ref F176479

Alpha Pro Shot Laser Level w/ Apache Storm Reciever.
Laser level.untested as has depleted Size C batteries.
Reciever power on but not tested further.
Reciever manufactured date of 03/2020.
Includes plastic case.

20 Lengths of Galvanized Building Steel

$820

Sold 24/05/2026

Skylarc Ref D176347

18 Lengths from 4360mm long to 4880mm
2 x 2170mm lengths
195mm x 75mm profile

Modified 20' Shipping Container

$800

Sold 24/05/2026

Skylarc Ref M175550

Rear panel cut out
Swinging panels in sides
Includes contents of empty drums, tyres and insulation
You will need a hiab or similar to load this container

Palfinger Kinshofer Crane Rotator

$793.78

Sold 24/05/2026

Skylarc Ref R176335

Model: Kinshofer PZR450G-68
Hydraulic swivel
4500kg capacity
Manufactured 2018

Forklift Mounted Lifting Jib

$786

Sold 24/05/2026

Skylarc Ref L175549

Box steel frame
140mm wide tyne slots
Chain with hook

Cigweld Transmig 200i Welder w/ Welding Trolley

$785

Sold 24/05/2026

Skylarc Ref B176397

Brand: Cigweld Professional
Model: Transmig 200i.
Part number: W1005202.
Input supply: 240VAC 50Hz.
Process capability: MIG GMAW.
Process capability: STICK MMAW.
Process capability: TIG GTAW.
Welding output MIG: 10A 14.5V to 210A 24.5V.
Welding output STICK: 10A 20.4V to 200A 28.0V.
Welding output TIG: 10A 10.4V to 200A 18V.
Duty cycle ratings and voltages are shown on the data plate in photos.
Front panel selection for MIG LIFT TIG and STICK.
Front panel trigger modes 2T normal and 4T latch.
Gas regulator BOC Argon 2000 kPa included as shown.
Includes MIG torch as shown.
Includes work clamp lead as shown.
Includes heavy steel welding trolley with gas bottle mount and side shelf. Trolley measures approx 1000x600x,950mm.

Hassay Savage Co. Keyway Broach Set

$751.89

Sold 24/05/2026

Skylarc Ref F176401

Hassay Savage Co. Keyway Broach Set.
4x broaches in sizes of 1/8", 3/16", 3/8", and 8mm.
Wood case 365x215x75mm.
See photos for details on case contents.
The 3/16" broach has some damage, see photos.

Powercraft TIG 201 AC DC Welder

$750

Sold 24/05/2026

Skylarc Ref F175517

Brand Powercraft
Model TIG 201 AC DC
Manufactured by The Shanghai Lincoln Electric Co Ltd
Input voltage rating 240V single phase
Front panel has controls for pulse frequency and AC frequency
Front panel has controls for pulse ratio and AC balance
Positive and negative welding output
Torch lead with TIG torch included
Maximum output current 200A
Missing top handle and negative electrode

Trupro Single Phase Metal Cutting Bandsaw

$720

Sold 24/05/2026

Skylarc Ref N175577

Brand: Trupro International Ltd
Unknown model (unreadable)
Metal cutting bandsaw
Floor standing base with wheels
Workholding vice on bed
Handwheel operated vice adjustment
Emergency stop button on control box
Start and stop push buttons on control box
Belt driven blade speed system
Blade speed chart on frame
Blade speeds 22 - 65 metres per minute
Single phase 1hp motor

2 x Palfinger Oil Hoses

$720

Sold 24/05/2026

Skylarc Ref P175553

Palfinger ET 050
Hydraulic hose reels
480mm diameter

Three Phase Belt Sander

$681

Sold 24/05/2026

Skylarc Ref K175574

550mm x 100mm sanding surface
3 phase 1.5kW motor
Hard wired
On stand

EWM Pico 160 Inverter Welder

$660

Sold 24/05/2026

Skylarc Ref H175519

Brand: EWM
Model: Pico 160 cel puls VRD (AUS)
Type: Inverter welding power source
Input voltage: 230V
Input frequency: 50Hz or 60Hz
Protection class: IP23
Serial number: 0000596291
Article number: 090-002129-28532
Welding processes: MMA Cel, MMA Pulse, TIG, TIG Pulse
Maximum welding current: 160A
Duty cycle ratings on nameplate up to 160A at 30 percent
No positive electrode

Heavy Steel Workshop Table Workbench

$651

Sold 24/05/2026

Skylarc Ref U176416

Heavy Steel Workshop Table Workbench.
6mm thick sterl plate top with 50x50mm box steel frame.

PowerBor Magnetic Drill PB32

$650

Sold 24/05/2026

Skylarc Ref W176444

PowerBor Magnetic Drill model PB32.
Older unit that operates, see photos and video, but not tested at length or under load.
Shows industrial wear and usage.

Heavy Steel Workshop Table Workbench

$631.78

Sold 24/05/2026

Skylarc Ref P176437

Heavy Steel Workshop Table Workbench.
6mm steel plate top.
75x75mm box steel frame and legs.

Hassay Savage Co. Keyway Broach Set

$631

Sold 24/05/2026

Skylarc Ref E176400

Hassay Savage Co. Keyway Broach Set.
6x broaches in sizes of 1/4", 6mm, 5mm, 4mm, 3mm, and a wax covered broach we are assuming is 2mm as its slightly smaller than the 3mm.
Wood case 365x215x75mm.
See photos for details on case contents.

All Steel Workbench w/ Vice

$615

Sold 24/05/2026

Skylarc Ref Y176498

All Steel Workbench w/ Vice.
40mm box steel and angle steel frame with 10mm plate steel top.
On right side is a vice stand welded to side of Workbench with a 125mm wide vice.
Lower shelves.
Items seen under and near Workbench are not included.

BOC Smootharc TIG 200 AC/DC Welder

$601

Sold 24/05/2026

Skylarc Ref G175518

Brand: BOC
Model: Smootharc TIG 200 AC/DC
Process: TIG and MMA
Polarity: AC and DC
200 amps max welding output
No cables

Heavy Duty Steel Workbench on Wheels

$600

Sold 24/05/2026

Skylarc Ref F175569

970mm work top height
4mm plate steel top
Record No. 6 vice
Drawer underneath

Fastening Hardware, Trailer & Boat Parts, Display Racks, & More

$587

Sold 24/05/2026

Skylarc Ref T176337

Large Lot of Fastening Hardware, Trailer & Boat Parts, Display Racks, & More.
Includes nuts bolts, various Trailer tieing parts, pins, hose clips, threaded rods, washers, wall mounted bin holdevrqck, metal workshop trolley, wall mounted Display Racks, and a self standing "Sparex" branded Display rack 1250x560x2130mm.
See photos for further details on included items.
NOTE that buyer should bring extra hands and tools to help with removing all these items and Racks.
Items are very dusty but unused leftover workshop parts stock.

Evolution ME3500 Magnetic Drill

$585

Sold 24/05/2026

Skylarc Ref Y176472

Evolution ME3500 Magnetic Drill.
Operates, see video, but not tested at length or under load. Crack in plastic motor housing. Dirty exterior.

Bramley Tube Bender

$585

Sold 24/05/2026

Skylarc Ref E176348

Bramley 064 tube bender
Dismantled
With stand
Some formers

Rack of Aluminum and Stainless

$555

Sold 24/05/2026

Skylarc Ref I175520

Assorted aluminum pipe, box, flat bar, and pipe
A few lengths of stainless box section
Lengths up to 6 metres

Johnson Self Leveling Rotary Laser Level Kit

$550

Sold 24/05/2026

Skylarc Ref H176455

Johnson Self Leveling Rotary Laser Level Kit.
Model 40-6543.
Can be powered by the included rechargable battery pack or by 6x Size C batteries.
Note that the charger needs a new plug end.
See photos for included accessories.
Level in excellent overall condition. Case exterior shows workshop storage wear and dust.

Hindin Industrial 500mm Air Ventilation Fan

$522.50

Sold 24/05/2026

Skylarc Ref U176468

Hindin Industrial 500mm Air Ventilation Fan.
Model No.CTF50H.
500mm fan diameter.
Single phase 10A plug.
Mounted on castors.
Flowrate 150 cubic metres per minute.
Some surface dust.
Operates normally.
Includew a length of 500mm dia flexible vent tubing.

Jetfire DC30 Diesel Kerosene Heater

$510

Sold 24/05/2026

Skylarc Ref D175541

Brand Jetfire
Model DC30
Ingress protection rating IP44
Heat output 30kW
Fuel type diesel or kerosene
Electrical rating 230V 50Hz
Power consumption 190W 0.84A
Includes integrated thermostat control
Unit is mounted on a wheeled frame
Power switch located on control panel
CE and AU markings on data plate
Corded electric power input

Cigweld Transmig 200i Welder

$510

Sold 24/05/2026

Skylarc Ref C175514

Brand: Cigweld Professional
Model: Transmig 200i
Part number: W1005202
Input voltage: 240V 50/60Hz
15 amp single phase plug
Front controls for amps volts and arc control
Process selector for MIG lift TIG and stick
Trigger mode selector for 2T normal and 4T latch
Includes attached MIG gun and leads as shown
Voltage Reduction Device (VRD)
200 amp max welding output

4x Lathe End Mills, Holders, Universal Boring Head

$510

Sold 24/05/2026

Skylarc Ref Y176316

4x Lathe End Mills, Holders, Universal Boring Head.
Mounting shanks 24mm diameter.

4 x Steel Work Stands

$500

Sold 24/05/2026

Skylarc Ref R175581

3 x 1200mm wide and 1x 1270mm wide
900mm tall
800mm wide bases

DeWalt 18V Green Beam Multi Line Laser Kit

$497

Sold 24/05/2026

Skylarc Ref A176474

DeWalt 18V Green Beam Multi Line Laser Kit.
Laser unit Model No.DCE089G18.
Includes DeWalt charger model DCB207-XE
Includes DeWalt 18V XR 2.0Ah 36Wh Li,-Ion battery DCB183-XE.
Includes DeWalt 18V 1.3Ah 24Wh Li-Ion Battery DCB185-XE, this battery shows moderate wear.
Includes selector and mounting frame.
Includes plastic padded carry case.
Laser operates but not tested for accuracy.
Case exterior shows workshop storage wear.
Both batteries charge and function, usage histories are unknown.

Koshin Ponstar Submersible Pump 750W, As New!

$495

Sold 24/05/2026

Skylarc Ref Z176395

Brand Koshin.
Model PBX7-55022.
Type PBX7-55022-BAA-1.
Ponstar submersible pump.
Output power 750W.
Power consumption 1250W.
Rated current 6.0A.
Voltage 220V.
Frequency 50Hz.
Ingress protection rating IP68.
Maximum head 15m.
Maximum delivery 330L per minute.
Connection diameter 50mm.
Rated water temperature range 5 to 40 degrees Celsius.
Submersible depth rating 5m.
Made in Japan.
Single phase 10A plug.
Condition - Pump is as new never used, only some light surface dust from open storage.

Steel Workbench on Wheels

$492.50

Sold 24/05/2026

Skylarc Ref A175538

Box steel frame
5mm plate steel top
Caster wheels

Horizontal Metal Hacksaw with Roller Feed Table

$473.37

Sold 24/05/2026

Skylarc Ref X175535

Horizontal metal cutting hacksaw
Fixed base with drip tray
Integrated workpiece vice
Spare blade
Manual control panel mounted on side
Hydraulic blade lift
Includes yellow steel roller feed table

Three Phase Sheet Metal Rollers

$465

Sold 24/05/2026

Skylarc Ref M175576

1350mm long x 75mm diameter
Top roller has come out of its mount
Adjustable top roller
Surface rust on rollers
Steel frame

Makita Cordless 18V LXT Grease Gun DGP180

$465

Sold 24/05/2026

Skylarc Ref Z176473

Makita Cordless 18V LXT Grease Gun model DGP180.
Includes instruction guide and plastic case.
Tool excellent condition and shows very little usage though there is some leaked blue grease within case. Case exterior shows more moderate workshop storage wear.
No batteries within this facility so we are unable to test the tool.

https://www.makita.co.nz/products/model/DGP180ZK

Three Phase Grinder Polisher

$460

Sold 24/05/2026

Skylarc Ref R175529

Polishing wheel one side
Wire wheel on the other (300mm diameter)

Steel Workshop Table Workbench

$457

Sold 24/05/2026

Skylarc Ref T176415

Steel Workshop Table Workbench.
5mm thick steel top surface.
65x35mm box steel and 40x40mm angle steel frame.
Wood board lower shelf.
Wheeled feet with removable stationary support brackets attached, see photos.
Other items seen under and around table are not included.

Stainless Welding Trolley

$455

Sold 24/05/2026

Skylarc Ref V176417

Stainless Welding Trolley.
12mm thick stainless top plate 635x485mm.
25x25mm box stainless frame.
10mm thick plexiglass middle and lower shelves, NOTE lower shelf has broken plexiglass.
Heavy duty 100mm dia, 50mm wide castors.
Angled stainless side tubes for holding welding rods or wire.
Hooks on each side for welding cables.
Rear lower platform for gas bottle.

250mm Rotary Milling Table

$455

Sold 24/05/2026

Skylarc Ref O176358

250mm Rotary Milling Table.
Mounting end bolt slots spaced approx 315mm appart on centre.
Table turns smoothly by handle.

Heavy Steel Table w/ Record No.6 Vice

$431.78

Sold 24/05/2026

Skylarc Ref U176442

Heavy Steel Table.
25mm thick steel plate top with 205x135mm I-Beam column.
Needs bolting to floor for full support.
Record No.6 Vice mounted on top.

Easy Access Adjustable Step Ladder

$425

Sold 24/05/2026

Skylarc Ref E175568

200kg capacity
Adjustable height
Max height to platform 2600mm

Thundebox Ute Toolbox

$420

Sold 24/05/2026

Skylarc Ref Y175588

Checker plate aluminum construction
Duel lids
Lockable but no key

Parts Only TCM Forklift

$415

Sold 24/05/2026

Skylarc Ref Q175554

Unknown model
Estimate approx 2 ton capacity
2 stage mast
11302 hours
Unknown engine
mechanically unknown condition
You will need a hiab or similar to load this machine

Power Hound Single-Phase Generator Set

$415

Sold 24/05/2026

Skylarc Ref H175545

Brand: Power Hound Generators
Single-phase generator set
Rated voltage 240V AC
Rated frequency 50Hz
Rated output 5.0kW
Maximum output 5.5kW
Three 240V AC outlets on front panel
Oil alert lamp on control panel
Pull and electric start engine with recoil starter
No battery so untested
1/2 tank of fuel
Has compression when pulled over

Makita Corded 125mm Straight Grinder GS5000

$410

Sold 24/05/2026

Skylarc Ref X176471

Makita Corded 125mm Straight Grinder.
Model GS5000.
Disk guard is missing.
https://www.makita.co.nz/products/model/GS5000

Assorted Annular Cutters & More

$410

Sold 24/05/2026

Skylarc Ref Z176447

Assorted Annular Cutters & More.
Diameters range from 14mm to 46mm.
Also includes 1x 40mm countersink cutter.
Includes some centre Annular cutter pins.
Condition varies with each item.

TengTools Long Handled Nutsert Gun HRL-N65N

$408

Sold 24/05/2026

Skylarc Ref I176482

TengTools Long Handled Nutsert Gun model HRL-N65N.
Includes steel case.
Tool excellent condition showing very light usage. Case exterior shows typical workshop storage wear.
https://www.tengtools.com/en-gb/products/long-handled-nutsert-gun

23x Adjustable Reamers

$406

Sold 24/05/2026

Skylarc Ref V176365

23x Adjustable Reamers.
Sizes from 7.5mm to 1 1/2".
Condition varies with each item.

2-Leg Lifting Chain Assembly, 7500kg Capacity

$405

Sold 24/05/2026

Skylarc Ref P176463

2-Leg Lifting Chain Assembly.
7500kg 2-leg Capacity
5300kg single leg Capacity.
6200mm length.
13mm chain size.
Certification tag expires 08/08/2026

Jetfire DC30 Diesel Kerosene Heater

$405

Sold 24/05/2026

Skylarc Ref C175540

Brand Jetfire
Model DC30
Ingress protection rating IP44
Heat output 30kW
Fuel type diesel or kerosene
Electrical rating 230V 50Hz
Power consumption 190W 0.84A
Includes integrated thermostat control
Unit is mounted on a wheeled frame
Power switch located on control panel
CE and AU markings on data plate
Starts and runs for a minute or so then stops and displays an error

Heavy Steel Mobile Table Trolley

$405

Sold 24/05/2026

Skylarc Ref L176433

Heavy Steel Mobile Table Trolley.
3mm steel top surface.
50x50mm box steel frame.
150mm diameter castors.
Lower drawer made from 3mm steel.
Very sturdy Mobile unit.
Wheels would benefit from a lubrication.

Arcopro ARCOMMA200 MMA200 welder

$400

Sold 24/05/2026

Skylarc Ref G176428

Brand Arcopro
Model ARCOMMA200.
Front panel label MMA200.
Process modes MMA and Lift TIG.
Input voltage rating 230V.
Input frequency 50 or 60Hz.
TIG output range 10A to 200A at 18V.
MMA output range 10A to 200A at 28V.
Duty cycle ratings shown on data plate, see photo.
Protection rating IP21S.
Power factor 0.73.
Insulation class H.
Display shows digital amperage readout.
Includes electrode holder lead.
Includes work clamp lead.

Three Phase Metal Cut Off Saw

$395

Sold 24/05/2026

Skylarc Ref S175556

Unknown make and model
350mm blade capacity
3 phase 35 amp plug

3x Mobile Workshop Trollies

$390

Sold 24/05/2026

Skylarc Ref R176465

3x Mobile Workshop Trollies.
Lighter weight metal construction.
Two have had their top shelves cut off, see photos.
All roll ok.

Veriga Professional NT 16-300 Snow Chains

$387

Sold 24/05/2026

Skylarc Ref W176392

Veriga Professional NT 16-300 Snow Chains.
See photos for details on compatible tyre sizes.
New unused leftover shop retail stock. Outer case dusty from storage
See the website below for further item details:
https://hamco.co.nz/product/veriga-proffessional-nt-16-300/?srsltid=AfmBOopz_ACDGAXT7EC5895J6tRzbnqL6V7b9rKUfggQPtrVWpGvteWq

3 x Steel Work Stands

$380

Sold 24/05/2026

Skylarc Ref V175559

2 x 1300mm x 910mm tall
1 x 1130mm tall x 860mm tall

90+ Threading Taps w/ Wood Board Stands

$373

Sold 24/05/2026

Skylarc Ref S176362

90+ Threading Taps.
Wood Board Stand each 480x250x55mm.
Condition varies with each tap.

Assorted Fastening Hardware & Threaded Rod w/ Wall Rack

$364

Sold 24/05/2026

Skylarc Ref U176338

Assorted Fastening Hardware & Threaded Rod.
Various nuts, bolts, screws, as well as stainless threaded rods.
Auction also includes the rods holder as well as the wall mounting bin hook racks seen in photos.
Note buyer should bring appropriate tools to remove rack bars from wall.
Items are dusty but unused leftover workshop parts stock.

Hydraulic Power Pack Jacking System

$356

Sold 24/05/2026

Skylarc Ref P176411

Hydraulic Power Pack Jacking System.
Unknown brand and model.
Main jack cylinder approx 400mm long, 55mm diameter.
See photos for included attachments.
NOTE that it seems the jack is low or empty of Hydraulic fluid as the attached ram does not move when jack handle is pumped.

3 x Steel Work Stands

$355

Sold 24/05/2026

Skylarc Ref X175561

All 1290mm-1300mm long
910mm tall

Rugged Bar Stool with Speight's Pride of the South Labeling

$350

Sold 24/05/2026

Skylarc Ref A176500

Rugged Bar Stool with Speight's Pride of the South Labeling.
Heavy steel base plate and centre column with a rugged look.
Brushed steel rim on seat with Speight's labeling.
Padded dark brown vinyl seats 400mm diameter.
Heavy duty stool, would benefit from a tidy-up.

8x Imperial Size Drills w/ Morse Taper No.3 Shanks

$347

Sold 24/05/2026

Skylarc Ref N176409

8x Imperial Size Drills w/ Morse Taper No.3 Shanks.
Sizes of:
29/32"
63/64"
15/16"
69/84"
1 1/16"
1 1/32"
1 1/8"
1 7/32"

Condition and remaining lengths varies with each drill.

14x Imperial Size Drills w/ Morse Taper No.2 Shanks

$341

Sold 24/05/2026

Skylarc Ref M176408

14x Imperial Size Drills w/ Morse Taper No.2 Shanks.
Sizes range from 9/16" to 57/84"
Condition and lengths vary with each drill.

Steel Rack and Contents

$332.89

Sold 24/05/2026

Skylarc Ref W175586

3620mm x 1280mm x 2000mm tall steel rack
2 x angle steel 200mm x 150mm x 6000mm
Galvanized channel 120mm x 65mm x 4570mm
Angle steel 100mm x 100mm x 4060mm
I-beam 90mm x 170mm x 3630mm
Assorted short lengths in various profiles

3x Live Lathe Centres

$332

Sold 24/05/2026

Skylarc Ref N176383

3x Live Lathe Centres.
- Groz branded unit with No.2 Tapered shank and 20mm diameter live cone. Turns smoothly.
- Skoda branded unit with No.4 tapered shank and 25mm diameter live cone. Turns smoothly.
- Unknown brand unit with No.5 Tapered shank and 30mm diameter live cone. Cone is very sticky when moving, may need lubrication.

4x Imperial Drills w/ Morse Taper No.4 Shanks

$330

Sold 24/05/2026

Skylarc Ref J176405

4x Imperial Drills w/ Morse Taper No.4 Shanks.
Sizes include:
1 3/4"
1 7/8"
2"
2 1/32"
Condition and length varies with each drill.

Weldwell Low Hydrogen Welding Electrodes, 4.0mm, 25kg

$325

Sold 24/05/2026

Skylarc Ref V176495

Weldwell Low Hydrogen Welding Electrodes.
No.77
Made in New Zealand.
4.0mm.
Total of 25kg of Welding rods in factory sealed packs.

Makita Corded High Speed Die Grinder GD0800C

$325

Sold 24/05/2026

Skylarc Ref M176460

Makita Corded High Speed Die Grinder GD0800C.
Includes side handle.
Shoes industrial usage and wear.
See video to hear tool running.

2 x Parts Only Petrol Generators

$322

Sold 24/05/2026

Skylarc Ref A176344

Gentech W 180 AC
Welder generator
Turns over and has compression but doesn't start
Powerlite generator
Turns over but very little compression
Parts or project

ESAB DART ES 200i PRO Welder

$320

Sold 24/05/2026

Skylarc Ref D175515

Brand ESAB
Model DART ES 200i PRO
200 amp max welding output
Digital display shows output current in amperes
Front panel main control knob for current adjustment
VRD indicator light on front panel
Shoulder strap attached to top of unit
Plastic case
No electrodes or other accessories

Large Lot of V-Belts

$316

Sold 24/05/2026

Skylarc Ref O176332

PLEASE READ! NOTE that the first photo does NOT show all the auction items as it was impossible to get them all in one photo. The first THREE photos are showing all four red hook racks with all the belts in the auction. The remaining photos are closer images of some of the belts.
Auction in for a roughly estimated 200+ V-belts of various sizes.
All are Industrial V-Belt branded.
Belts appear to be as new but older parts stock that appear to have been hanging here for some time as most packaging is yellowed and faded.
NOTE that the red steel Hook racks are NOT included!

9x Imperial Size Drills w/ Morse Taper No.4 Shanks

$315

Sold 24/05/2026

Skylarc Ref K176406

9x Drills w/ Morse Taper No.4 Shanks, though NOTE that one was found after original booking and is therefore not seen in the group photos. A few extra photos of it by itself have been added to the photo list.
Sizes include:
1 3/16"
1 5/16"
1 5/32"
1 11/64"
1 1/4"
1 15/32"
1 1/2"
1 7/16"
1 5/8" (this one is not seen in original grouping, separate photos added afterwards).
Condition and length varies with each drill.

Abicor Binzel Evo Pro Welding Torch MB36, New

$310

Sold 24/05/2026

Skylarc Ref L176485

Abicor Binzel Evo Pro Welding Torch.
Model.No.MB36.
Made in Germany.
As new unused with box. Box has some damage.

https://www.boc.co.nz/shop/en/nz/binzel-mb-evo-pro-36-01405

Abicor Binzel Evo Pro Welding Torch MB36, New

$305

Sold 24/05/2026

Skylarc Ref N176487

Abicor Binzel Evo Pro Welding Torch.
Model.No.MB36.
Made in Germany.
As new unused with box.

https://www.boc.co.nz/shop/en/nz/binzel-mb-evo-pro-36-01405

Milwaukee M18 26mm SDS Plus Rotary Hammer, Tool Only

$305

Sold 24/05/2026

Skylarc Ref K176484

Milwaukee M18 26mm SDS Plus Rotary Hammer.
Model No. M18 FH.
Includes side handle.
No batteries in this facility so unable to test tool.

https://www.milwaukeetool.co.nz/power-tools/concrete/rotary-hammers/M18FH-0.html

All Steel Gas Bottle Trolley

$305

Sold 24/05/2026

Skylarc Ref O176462

All Steel Gas Bottle Trolley.
400mm diamterr steel wheels.
Lifting base 570x270mm.
Upper bracket with two curves to accommodate two gas bottles.
Rolls easily but wheels would benefit from some CRC lubricant or similar as they are a bit squeaky.

Aluminum Tank

$305

Sold 24/05/2026

Skylarc Ref B176345

Unknown application
Filler and vent on top

Thunderbox Tool Box

$300

Sold 24/05/2026

Skylarc Ref E175542

Thunderbox SBT850 Site Box
Locked with two padlocks (key included)
Folding carry handles
Gas strut lid
Dent in front log handle

3-Phase 32A Power Extension Cable Lead, 10-metre

$300

Sold 24/05/2026

Skylarc Ref C176424

3-Phase 32A Power Extension Cable Lead
10-metre length.
32A 4-pin plugs.
Female plug missing cap.
Some cracks in cable sleeve, see photos.

Pair of 1800mm Shash Clamps

$299

Sold 24/05/2026

Skylarc Ref X176419

Pair of 1800mm Shash Clamps.
Unknown brand.
One jaw missing rail pin.
Both tightening screws missing crank handles.
Total lengths approx 1830mm.

Abicor Binzel Evo Pro Welding Torch MB36, New

$295

Sold 24/05/2026

Skylarc Ref M176486

Abicor Binzel Evo Pro Welding Torch.
Model.No.MB36.
Made in Germany.
As new unused with box.

https://www.boc.co.nz/shop/en/nz/binzel-mb-evo-pro-36-01405

Helicopter Side Pod

$295

Sold 24/05/2026

Skylarc Ref S176336

The Helicopter Line
Unknown make or model
Side opening
No paperwork

Hitachi Cut-Off Saw

$288

Sold 24/05/2026

Skylarc Ref G175544

Brand: Hitachi
Model: HU-14
Type: 355mm cut-off machine
Made in Japan
Rated input: 2000W
Frequency: 50 to 60Hz
No load speed: 3700rpm
Wheel size capacity: 355mm x 2.8mm x 25.4mm
Includes abrasive cut-off wheel fitted
Base includes integrated workpiece vice with leadscrew clamp

Makita Cordless 18V LXT Die Grinder DGD800

$285

Sold 24/05/2026

Skylarc Ref E176478

Makita Cordless 18V LXT Die Grinder model DGD800.
No batteries in this facility so we are unable to test tool.
Auction includes tool only.

TengTools 60mm Combination Spanner Wrench

$285

Sold 24/05/2026

Skylarc Ref L176459

TengTools 60mm Combination Spanner Wrench.
Part No. 6005 60
Chrome Vanadium type steel.
600mm length.

Assorted Welding Regulators, Hoses, Torches

$272

Sold 24/05/2026

Skylarc Ref Y176368

Assorted Welding items.
8x Regulators
2x brass Torches.
1x hose length
1x grounding cable length.

Assorted Fastening Hardware, Bolts, & More

$270

Sold 24/05/2026

Skylarc Ref M176434

Assorted Fastening Hardware, Bolts, & More.
Most items appear to be of the galvanised variety.
Bolts, Nuts, Washers, screws, and more, see photos.
Leftover workshop parts stock.

Air Command Compressor (Faulty)

$265

Sold 24/05/2026

Skylarc Ref E176322

Air Command Industrial 5.5 compressor
3 phase
200 litre receiver
Doesn't run
Unknown faults

Fuel Dispenser

$261.78

Sold 24/05/2026

Skylarc Ref K175548

Fuel pumping system in metal frame
Includes hose reel, flexible fuel hose on reel, fuel nozzle
Includes pump unit mounted under frame
Data plate shows maximum flow 70 L per minute, outlet diameter 20 mm
Data plate shows minimum quantity 5 L

200mm 3-Jaw Lathe Chuck

$260

Sold 24/05/2026

Skylarc Ref T176363

200mm 3-Jaw Lathe Chuck.
50mm inner bore.
85mm thick body.
Key and mounting pins are missing.

BOC Smootharc S 316L Welding Electrodes, 3.2mm, 12kg

$255

Sold 24/05/2026

Skylarc Ref U176494

BOC Smootharc S 316L Welding Electrodes.
3.2mm, x 350mm size.
4x 3kg sealed canisters in auction.
One cansister is dented.

Parts Only Trupro Bandsaw

$255

Sold 24/05/2026

Skylarc Ref A175564

Trupro 18" Wood Bandsaw
No blade
Table is loose
Doesn't power up
Parts or project

Heavy Duty Steel Trolley

$252.45

Sold 24/05/2026

Skylarc Ref B175565

2mm steel top
Box steel frame
Castor wheels

3x Milwaukee M18 Fuel 1/2" Drive Impact Wrenches

$247.50

Sold 24/05/2026

Skylarc Ref Q176490

3x Milwaukee M18 Fuel 1/2" Drive Impact Wrenches.
ID labels are worn on all three so usure as to what specific models these are.
All show heavy industrial workshop wear and usage, see photos.
No batteries in this facility so we are unfortunately unable to test these Wrenches.

PowCon 400SM Welder

$247

Sold 24/05/2026

Skylarc Ref E175516

Brand PowCon
Model 400SM
Welding power source
Gouging torch fitted
Runs for a while then stops and clicks repeatedly

Steel Frame Heavy Duty Workbench

$245

Sold 24/05/2026

Skylarc Ref L176381

Steel Frame Heavy Duty Workbench.
50x50mm box steel frame with two layers of MDF board top surface, half of this is covered with a 1.5mm thick steel sheet.
Note that items seen on and under or near workbench are NOT included.

Steel Workbench

$236.50

Sold 24/05/2026

Skylarc Ref P175579

5mm plate steel top
Box steel frame
Drawer (damaged rails)

Ramset Dynadrill Rotary Hammer DD544

$236

Sold 24/05/2026

Skylarc Ref W176470

Ramset Dynadrill Rotary Hammer DD544.
R2 (TM).Plus tool holder.
Includes case.
Operates, see video. Very dirty exterior.

EasyAccess Industrial Platform Step Ladder

$235

Sold 24/05/2026

Skylarc Ref S176466

EasyAccess Industrial Platform Step Ladder.
Max weight 150kg.
Platform 500x380mm and is 1450mm above floor.
Folds for transport.

Aluminum Jet Boat Intake

$235

Sold 24/05/2026

Skylarc Ref Q176334

390mm x 360mm square intake hole
260mm internal diameter, 365mm external diameter round hole
McAnelly Castings

Assorted Thread Dies

$230

Sold 24/05/2026

Skylarc Ref R176361

Assorted Thread Dies.
Includes 2x incomplete due sets in steel cases each 485x325x50mm.
Condition varies greatly with each piece.

3x Hitachi 18V Power Tools w/ Batteries & Charger

$225

Sold 24/05/2026

Skylarc Ref J176483

3x Hitachi 18V Power Tools w/ Batteries & Charger.
Includes:
- Battery Charger UC 18YML2
- Cordless Impact Driver Drill DV 18DBL2.
- Cordless Impact Driver WR 18DBDL2.
- Cordless Impact Wrench, unable to read full model number off worn ID label.
- 2x 18V 6.0Ah 108Ah Li-Ion batteries.
- 1x 18V 5.0Ah 90Wh Li-Ion Battery.

All Tools and batteries operate see video, but show heavy industrial workshop wear and usage.

Small Sheet Metal Rollers on Stand

$225

Sold 24/05/2026

Skylarc Ref F176323

450mm wide x 40mm rollers
Hand crank
On stand

EasyAccess Industrial Dual Purpose Step Ladder

$221

Sold 24/05/2026

Skylarc Ref T176467

EasyAccess Industrial Dual Purpose Step Ladder.
150kg max capacity.
2035mm stap Ladder form height.
3900mm extendion Ladder form length.

Assorted Gear Puller Tooling, Components

$215

Sold 24/05/2026

Skylarc Ref A176318

Assorted Gear Puller Tooling, Components.
See photos for included components.
Unknown how many complete sets.

Milwaukee M18 One-Key 1/2" High Torque Impact Wrench

$210

Sold 24/05/2026

Skylarc Ref P176489

Milwaukee M18 One-Key 1/2" High Torque Impact Wrench.
Model No. M18 ONEFHIWF12.
Auction is for tool only.
No batteries in this facility so we are unfortunately unable to test tool.
Tool shows industrial wear and usage.
See the manufacturer website below for further item specs:
https://www.milwaukeetool.co.nz/power-tools/impacts-and-fastening/impact-wrenches/M18ONEFHIWF12-0.html

Assorted Fire Extringuishers, Fire Blankets Safety Signage

$206

Sold 24/05/2026

Skylarc Ref X176445

Assorted Fire Extringuishers, Fire Blankets Safety Signage.
Fire Extinguishers include ABE powder, HP foam, and carbon dioxide type.
Sizes up to 9.0kg.
2x Fire blankets sizes 1.0x1.0m and 1.2x1.8m.
Handheld reflective Stop/Slow sign 300mm diameter, 700mm length.

2 x Steel Work Stands

$205

Sold 24/05/2026

Skylarc Ref T175583

1200mm and 1270mm long
900mm tall
800mm and 750mm wide at base

Steel Rack and Contents

$205

Sold 24/05/2026

Skylarc Ref O175578

1960mm long x 1170mm x 1150mm tall vertical storage rack
Contents include:.
2750mm x 1250mm x 3mm sheet steel
1100mm x 900mm x 7mm plate steel (irregularly cut)
Several sheets of light galvanized steel
Steel grates
Various other offcuts

3x Keyed Drill Chucks w/ Morse Taper Mounting Shanks

$205

Sold 24/05/2026

Skylarc Ref H176403

3x Keyed Drill Chucks w/ Morse Taper Mounting Shanks.
Includes:
- Jacobs Chuck USA model 34-06 13mm drill chuck with No.3 shank.
- Porta JT6 S3 16mm drill chuck with No.4 shank.
- Unknown brand 16mm drill chuck with No.3 shank.
All Chucks include keys.

Assorted End Mill Bits.

$196.50

Sold 24/05/2026

Skylarc Ref L176355

Assorted End Mill Bits..
Condition varies with each unit.

Assorted Holesaws

$193.89

Sold 24/05/2026

Skylarc Ref D176399

Assorted Holesaws.
Sizes range from 19mm to 150mm.
Condition varies greatly with each Saw, from new to heavily used.
Some brands are Sutton and Bosch.

Makita Corded 230mm Angle Grinder

$190

Sold 24/05/2026

Skylarc Ref Z176499

Makita Corded 230mm Angle Grinder.
Model No. GA9060.
Includes side handle.
Disk washers and tool.are missing.
Tool operates but not tested at length or under load.

Wall Mounted Rack and Contents of Bolts

$190

Sold 24/05/2026

Skylarc Ref F175543

Lamson bins with contents of bolts etc
Threaded rod
Buyer to decommission

Ramset Laser Level w/ QEO Fennel Receiver

$188

Sold 24/05/2026

Skylarc Ref S176492

Ramset Laser Level w/ QEO Fennel Receiver.
Laser Level model RLML.
Uses 3x AA batteries.
Receiver model FR 55-M.
Both tools power on and operate but accuracy not tested.
Level in excellent condition, Receiver in very good cindition.
Includes a dirty carry case.

Johnson Self Leveling Rotary Laser Level Kit, Damaged Glass

$186

Sold 24/05/2026

Skylarc Ref I176456

Johnson Self Leveling Rotary Laser Level Kit.
Model 40-6543.
Can be powered by the included rechargable battery pack or by 6x Size C batteries.
Note that charger needs new plug end.
See photos for included accessories.
Level in excellent overall condition and appears to operate normally but NOTE that all four glass windows protecting the rotating laser are broken, see photos and video.

22x Assorted SDS Plus Drill Bits

$186

Sold 24/05/2026

Skylarc Ref E176374

22x Assorted SDS Plus Drill Bits.
Diameters from 5mm to 28mm.
Condition varies with each drill.

2 x Steel Work Stands

$183

Sold 24/05/2026

Skylarc Ref W175560

1200mm and 1100mm long
910mm tall

Vintage Record No.141 Mitre Corner Clamp

$182.90

Sold 24/05/2026

Skylarc Ref K176354

Vintage Record No.141 Mitre Corner Clamp.
Made in England.
Dirty surfaces, would benefit from a good cleanup.

8x Morse Taper Drill Shank Sleeves

$181

Sold 24/05/2026

Skylarc Ref L176407

8x Morse Taper Drill Shank Sleeves.
Includes:
- 2x No.2 to No.3
- 2x No 2 to No.4
- 2x No.3 to No.4
- 1x No.4 to No.5
- 1x No.3 to No.4 extension sleeve

Condition varies with each unit.

7x Recoil Thread Repair Kits

$176

Sold 24/05/2026

Skylarc Ref B176319

7x Recoil Thread Repair Kits.
Kit condition varies, some show more usage than others, see photos.

Ramset Dynadrill Rotary Hammer DD544

$171

Sold 24/05/2026

Skylarc Ref V176469

Ramset Dynadrill Rotary Hammer DD544.
Includes plastic case.
R2 (TM) Plus tool holder.
Drill operates, see video. Drill has a broken handle. Very dirty exterior.
https://ramset.com.au/product/dynadrill-544/

Elephant 1 Ton Chain Hoist

$171

Sold 24/05/2026

Skylarc Ref T175557

Elephant F-100 electric chain hoist.
Rated capacity 1 ton.
Manufacturer Elephant Chain Block Co. Ltd.
Made in Japan.
Serial number on hoist plate F3231.
Lifting speed at 60 Hz 5.3 m per min.
Lifting speed at 60 Hz 17 ft per min.
Includes hook with safety latch.
Includes chain and control cables.
Hoist motor is Yaskawa Electric 3 phase induction motor.
Motor type B.
Motor type F2.
Made in Japan
Controller
Has been in storage a long time

Single Leg Lifting Chain Assembly, 2.5m length

$171

Sold 24/05/2026

Skylarc Ref D176425

Single Leg Lifting Chain Assembly.
2.5m length.
10mm chain size.
No certification tag attached so weight capacity unknown.

Assorted Kathe Turning Tools, Boring Bars, Dead Centre

$171

Sold 24/05/2026

Skylarc Ref J176353

Assorted Kathe Turning Tools, Boring Bars, Dead Centre.
Condition varies with each unit.

Large Steel Work Table

$171

Sold 24/05/2026

Skylarc Ref C176346

Box steel frame
3mm steel top

5x Lincoln Electric PowerCraft Electronic Welding Masks

$166

Sold 24/05/2026

Skylarc Ref N176435

5x Lincoln Electric PowerCraft Electronic Welding Masks.
All are model No. ADF300S.
All shoe moderate to heavy wear and usage. Very dusty.

Bullivants 2000kg Chain Block

$162

Sold 24/05/2026

Skylarc Ref H176481

Bullivants 2000kg Chain Block.
3-metre lift.
2.5 metre hand chain
Fitted with 8mm x 24mm G80 chain.

5x Large Combination Spanner Wrenches, 34mm to 50mm Sizes

$161

Sold 24/05/2026

Skylarc Ref J176457

5x Large Combination Spanner Wrenches.
JBS branded 50mm
Unbranded 2", this wrench has had its enclosed end cut open, see photos.
Unbranded 41mm
Powerbuilt branded 35mm
Unbranded 34mm
All are drop forged steel.

Assorted Grinding Disks, 125mm to 230mm Sizes

$161

Sold 24/05/2026

Skylarc Ref D176373

Assorted Grinding Disks.
Diameters include 125mm, 180mm, 230mm.
See photos for further details on types included.
Approx 60+ units in auction.
All are unused leftover workshop Consumables stock. All expiry dated disks are approx 1 to 5 years expired.

Ramset AC 1630P Wet/Dry Vacuum Cleaner

$160

Sold 24/05/2026

Skylarc Ref B176423

Ramset AC 1630P Wet/Dry Vacuum Cleaner.
30L tank size.
Includes hose with cir ularvtop attachment.
All orher attachments are missing
Vacuum functions, see video, but needs new filters and a strong cleanup, see photos.
Both front castors are missing and rear wheels are not fully attached.

90mm Tiltting Milling Vice + 2nd incomplete unit

$160

Sold 24/05/2026

Skylarc Ref K176380

One complete tiltable mill vice with 90mm wide jaws, opens to 90mm. Mounting slots spaced 200mm appart on centre. This complete vice functions normally.
Auction also includes a second identical vice but this second vice is missing the moving jaw, see photos.

250mm 3-Jaw Lathe Chuck

$159

Sold 24/05/2026

Skylarc Ref P176359

250mm 3-Jaw Lathe Chuck.
80mm centre bore.
80mm body thickness.
Chuck key is missing.

2x Kincrome K4700 Blind Nut Riveter Sets

$157

Sold 24/05/2026

Skylarc Ref T176493

2x Kincrome K4700 Blind Nut Riveter Sets.
One set missing one of the accessory attachments, see photo.

Assorted Mill Lockdown Components, 2x Incomplete sets

$156

Sold 24/05/2026

Skylarc Ref Q176360

Assorted Mill Lockdown Components.
2x Incomplete Vertex branded sets.
12mm diameterthreaded rods.
See photos for included parts.

Assorted Trolley Jacks & Jack Stands

$152

Sold 24/05/2026

Skylarc Ref L176329

Assorted Trolley Jacks & Jack Stands.
2x trolley javks, both unknown brand and weight capacity.
2x yellow jack stands with 1500kg max capacity.
2x other larger stands with unknown capacities.
Condition varies greatly with each item.
Smaller trolley jack is missing lever and seems to not operate. Larger jack does function but not tested under load.

Large Steel Dolly

$151

Sold 24/05/2026

Skylarc Ref Q175580

Box steel frame
Pneumatic tyres (flat)

DeWalt Laser Chalk Line DW088

$151

Sold 24/05/2026

Skylarc Ref D176477

DeWalt Laser Chalk Line model DW088.
Includes mounting bracket and plastic case.
Operates normally but accuracy not tested

Large Wheeled Toolbox

$151

Sold 24/05/2026

Skylarc Ref D175567

Panel steel construction
Castor wheels

Heavy Steel Low Profile Platform Trolley

$151

Sold 24/05/2026

Skylarc Ref Q176412

Heavy Steel Low Profile Platform Trolley.
50x25mm box steel frame.
2mm thick steel top surface.
100mm dia, 35mm wide heavy duty castors.

Ryobi 200mm Bench Grinder

$151

Sold 24/05/2026

Skylarc Ref O176384

Ryobi 200mm Bench Grinder.
Model No.HBG825B.
Single phase.
Operates ok, see video.

Workshop or Retail Shelving Unit

$151

Sold 24/05/2026

Skylarc Ref N176331

Workshop or Retail Shelving Unit.
25x25mm box steel frame, painted MDF board shelves, aluminium checker plate side panels, 1mm stainless steel sheet top surface.

Assorted 1.2mm Stainless Sheets

Skylarc Ref J176327

2440mm x 1220mm
1520mm x 1180mm
Assorted small offcuts

Milwaukee M18 Fuel 1/2" Mid-Torque Impact Wrench

$149

Sold 24/05/2026

Skylarc Ref O176488

Milwaukee M18 Fuel 1/2" Mid-Torque Impact Wrench.
ID label is worn so specific model is unknown.
No batteries in this facility so unfortunately we are unable to test the tool.
Shows industrial workshop wear and usage.

Veriga Pro Compact 12 Snow Chains, Size 110

$147.50

Sold 24/05/2026

Skylarc Ref Y176394

Veriga Pro Compact 12 Snow Chains.
Size 110.
12 mm chain with manual tensioning. Suitable for continuous driving on icy and snowy roads.
Approved in accordance with the ON V5117 standard.
Running surface in rhomboid shape, made of special alloy steel, with ”D” profile links for safe grip on snow and ice.
High quality heat treatment – carburising.
Auto-locking device.
Ergonomic and colour-coded parts with easy to follow fitting instructions and plastic gloves for a fast, easy and clean fitting.
Polymeric tensioning chain stopper helps to preserve the rim.
See photos for tyre size compatibility chart.
As new leftover shop retail stock. Dusty case exterior from storage.
See the manufacturer website below for further item details:
https://eshop.veriga-lesce.com/en/commerce/products/pro-compact-12-cd

ESAB Sentinel A50 Welding Helmet

$146

Sold 24/05/2026

Skylarc Ref K176432

ESAB Sentinel A50 Welding Helmet.
Batteries depleted in electronics dimming controls so untested.
Shows typical industrial wear and usage.

https://weldingengineers.co.nz/welding-products/welding-helmets/sentinel-a50/

88mm Tilting Milling Vice

$141

Sold 24/05/2026

Skylarc Ref J176379

Tilting Milling Vice.
88mm wide jaws.
Opens to approx 80mm.
Mounting slots spaced approx 200mm appart on centre.
Drill holes in jaw slide, see photos.

Classic Vintage Metal Parts Drawer Benchtop Cabinet

$138

Sold 24/05/2026

Skylarc Ref M176356

Classic Vintage Metal Parts Drawer Benchtop Cabinet.
360x155x190mm.
One drawer is missing.
2x drawrs are slightly longer so likely from another unit.
Dirty and oily sucfaces, would benefit from a good cleanup.

Benchtop Vice, Made in England

$137.66

Sold 24/05/2026

Skylarc Ref G176402

Benchtop Vice.
Made in England.
Unable to decipher manufacturer name.
Model No.186/5
125mm wide jaws.
Approx 390mm vice length when fully closed.
Jaws some much wear see photos.
Jaws move easily

2 x Steel Work Stands

$132

Sold 24/05/2026

Skylarc Ref X175509

1260mm x 750mm x 900mm tall

Veriga Stop & Go SUV 16-267 Snow Chains, New

$131

Sold 24/05/2026

Skylarc Ref V176391

Veriga Stop & Go SUV 16-267 Snow Chains.
See photos for compatible tyre size list.
New leftover shop retail.stock. Case exterior dusty from storage.

3x Corded Sanders / Pollishers

$129

Sold 24/05/2026

Skylarc Ref S176440

3x Corded Sanders / Pollishers.
Includes:
- Ryobi model ERO750VK random Orbital sander. This tool shows more moderate wear and usage in appearance and motor sound.
- G-Force model GFFXRS206 random Orbital sander. This tool sounds good and operates normally. Shows mild usage.
- Jobmate model JM1400CP Polisher/ Grinder. This unit operates normally and shows generally mild usage.

AlpineStar AS130 Snow Chains, 2x New Sets

$128

Sold 24/05/2026

Skylarc Ref R176387

AlpineStar AS130 Snow Chains.
2x New Sets in auction, one case has been opened.
See photos for tyre size compatibility.
New leftover shop retail stock. Case exteriors dusty from storqge.
See the website below for further item specs:
https://hamco.co.nz/product/alpinestar-130/?srsltid=AfmBOoq3TgMM5juuvpTqog7S1OM46DaZXTRhNjwZgbS7JFCQa-qVaCSG

AlpineStar AS110 Snow Chains, New

$127.50

Sold 24/05/2026

Skylarc Ref P176385

AlpineStar AS110 Snow Chains.
See the photos for tyre compatibility details.
New unopened leftover shop retail stock. Dusty case exterior from storage.
https://hamco.co.nz/product/alpinestar-110/?srsltid=AfmBOoogeE6BLvXwV_zdhUlBvK3-5SD2DEmRH81plMd_o-dQIDli_XPM

Assorted Loose Jobber Drills & other Drills

$126

Sold 24/05/2026

Skylarc Ref C176320

Assorted Loose Jobber Drills & other Drills.
Wide mix of sizes and conditions.

Galvanized Rebar Lengths

$126

Sold 24/05/2026

Skylarc Ref G176324

Approx 14 lengths
15mm diameter
Shortest lengths 2400mm
Longest lengths 3100mm

Wurth Truck Wash Concentrate, 20L

$125

Sold 24/05/2026

Skylarc Ref U176390

Wurth Truck Wash Concentrate.
20 litre unopened jug.

4x Air Tools, Sander, Applicator, Rivet Gun, Tyre Inflator

$122

Sold 24/05/2026

Skylarc Ref J176431

4x Air Tools, includes:
- Ampro Heavy Duty Air Belt Sander A4291.
- Ampro Air oiler /grease Applicator tool.
- Unknown brand English made tyre inflation tool.
- Unknown brand air pop rivet gun.

All Tools are untested.

Makita Cordlews18V LXT Impact Driver & Hammer Drill Driver

$120

Sold 24/05/2026

Skylarc Ref F176453

Makita Cordlews18V LXT Impact Driver & Hammer Drill Driver.
Impact Driver is model DTD152
Hammer drill driver is DHP484.
Auction includes the two tools only.
No batteries available in this workshop so both Tools are untested.

3x Power Tools by Hikoki, Dremel, Black & Decker

$116

Sold 24/05/2026

Skylarc Ref E176426

3x Power Tools, includes:
- Dremel model 396 Type 1 grinding tool. Tool runs normally. Good condition.
- Hikoki 135mm angle grinder, unable to decipher model number. Tool runs but motir sounds rough. Average condition.
- Black & Decker multi tool model BMT300-XE, runs normally. Good condition.

2x ProEquip Bottle Jacks, 20-ton & 6-ton Units

$116

Sold 24/05/2026

Skylarc Ref Y176420

2x ProEquip Bottle Jacks.
20-ton capacity jack Part No.PE2014 with minimum height of 245mm, max height of 450mm.
6-ton capacity jack Part No.PE2017 with minimum height of 215mm, max height of 455mm.
Includes just length of one jacking bar.
Both jacks function but not tested under load.

3x Boat Trailer Keel Roller & Bracket Assrmblies

$113.55

Sold 24/05/2026

Skylarc Ref M176330

3x Boat Trailer Keel Roller & Bracket Assrmblies.
Black hard rubber rollers 325mm long, 70mm to 100mm in diameter.
Frames are made from 10mm thick aluminium plate.
Overall dimensions of each assembly is approx 350x100x235mm.
See photos for further design details.
Items appear unused but dusty from showroom storage.

5x Assorted G-Clamps

$113

Sold 24/05/2026

Skylarc Ref I176378

5x Assorted G-Clamps.
Fuller 150mm
Record No.4 100mm.
BlackSteel No.10 200mm.
2x Unknown brand 150mm units.
Condition varies greatly with each tool.

Large Mill Vice, Faulty

$112

Sold 24/05/2026

Skylarc Ref N176357

Large Mill Vice.
200mm wide jaws.
Vice crank tool is missing.
Note that threaded rod turns but jaws do not slide open, only the threaded rod just moves outward.
Very heavy vice!

4 x Steel Work Stands

$110

Sold 24/05/2026

Skylarc Ref U175584

Lengths range from 1070mm long - 1910mm long
850mm - 910mm tall

Bin of Assorted Copper / Brass Welding Accesories, Tips, Connectors, & More

$107

Sold 24/05/2026

Skylarc Ref U176364

Bin of Assorted Copper / Brass Welding Accessories including tips, Couplings, connectors and other related welding hardware see photos.
Most parts appear as new unused. A few used parts are also mixed in.
Plastic bin 410x370x80mm.

3x Arco Air Suction Paint Spray Guns

$106.75

Sold 24/05/2026

Skylarc Ref E176452

3x Arco Air Suction Paint Spray Guns.
Made in Taiwan.
Stainless steel construction.
All have dried paint residue on them.

Heliarc TIG Welder (Parts Only)

$106

Sold 24/05/2026

Skylarc Ref G176350

Heliarc 252 AC/DC
Three phase
250 amp
On trolley
Has been stored in a container which has leaked
Doesn't power up
Parts only

Brother MFC-L2713DW Multi Function Mono Laser Printer

$105.50

Sold 24/05/2026

Skylarc Ref X176341

Brother MFC-L2713DW Multi Function Mono Laser Printer.
Prints up to A4 size.
15,490 total pages printed.
1023 copies.
See photos for current toner levels.
Dusty exterior from Workshop office usage.

Bahco 24-piece 1/2" Drive Metric Socket Set S240

$104.50

Sold 24/05/2026

Skylarc Ref G176480

Bahco 24-piece 1/2" Drive Metric Socket Set No. S240.
Metric socket sizes 10mm to 32mm.
Set appears complete.

2 x Steel Work Stands

$104

Sold 24/05/2026

Skylarc Ref V175585

1200mm x 650mm x 890mm tall

TengTools 46mm & 41mm Combination Spanner Wrenches

$104

Sold 24/05/2026

Skylarc Ref K176458

TengTools 46mm & 41mm Combination Spanner Wrenches.
Part No. 6005 46 and 6005 41.
Chrome Vanadium steel type.
Lengths are 500mm and 460mm.

Single Phaee 200mm Bench Grinder

$104

Sold 24/05/2026

Skylarc Ref T176389

Single Phaee 200mm Bench Grinder.
Unknown brand.
Model No. MD3220D.
Uses grinding wheels up to 200mm diameter.
Eye guard screens are missing.
NOTE thst the unit will power on but the on/off switch is very stiff and contact isn't constant, a new switch may be needed.

105mm Milling Vice

$104

Sold 24/05/2026

Skylarc Ref M176382

Milling Vice.
105mm wide jaws.
Opens to approx 125mm.
Mounting base 245x175mm.
Jaws move easily but bed and jaws show moderate drilling damage, see photos. Very greasy surfaces.

Heavy Duty Steel Workbench

$103

Sold 24/05/2026

Skylarc Ref O176436

Heavy Duty Steel Workbench.
4mm steel top.
Box steel frame with welded sheet sterl side panels.
Galvsnised lower door that can be locked with a padlock.
Inner storage area with slots for long thin materials.
No backside panel to lower enclosed cupboard!
Sturdy heavy duty custom made unit.

Milwaukee M18 HammerVac 28mm Dust Extractor,

$101

Sold 24/05/2026

Skylarc Ref R176491

Milwaukee M18 HammerVac 28mm Dedecated Dust Extractor.
Model No.M18 FPDEX.
Workd with compatible Milwaukee M18 SDS hammer drills.
Some light Dust on exterior but inner dust collection bin and filter are completely clean indicating this tool is as new and unused.
See the manufacturer website below for further item specs.
https://www.milwaukeetool.co.nz/power-tools/concrete/hammer-dust-extractors/M18FPDEX-0.html

Veriga Compact NT 9mm Snow Chains, New

$101

Sold 24/05/2026

Skylarc Ref X176393

Veriga Compact NT 9mm Snow Chains.
120.
9 mm chain with manual tensioning. Chain of excellent quality and durability, reliable even in emergency situations.
Approved in accordance with the ON V5117 standard.
Running surface in rhomboid shape, made of special alloy steel, with ”D” profile links for safe grip on snow and ice.
High quality heat treatment – carburising.
Auto-locking device.
Ergonomic and colour-coded parts with easy to follow fitting instructions and plastic gloves for a fast, easy and clean fitting.
Polymeric tensioning chain stopper helps to preserve the rim.
Set is new leftover shop retail stock. Case exterior dusty from storage.
See the manufacturrvwebsite below for further item specs:
https://eshop.veriga-lesce.com/en/commerce/products/pro-compact-9-ce

Assorted Building Props

$101

Sold 24/05/2026

Skylarc Ref V175507

4 x building props
2 x 2400mm long
1 x 1700m long
1 missing end section

3x Bosch Power Tools

$100

Sold 24/05/2026

Skylarc Ref D176451

3x Bosch Power Tools.
Includes:
- Vintage Bosch Corded Electro-Brush Sander/Polisher model No.GEB 1000 CE. Older model but operates ok.
- Bosch Professional Heavy Duty Corded 125mm Angle Grinder GWS 17-125 CIE. Seems to operare ok.
- Bosch Cordless Professional Heavy Duty 18V Hammer Drill Driver model No.GSB 18V-60 C. No batteries available so this tool is untested

The two corded tools operate but not tested at length or under load. cordlesstool untested as no batteries available in this workshop. All Tools show industrial wear and usage.

5x Assorted Welding & Grinding Masks

$100

Sold 24/05/2026

Skylarc Ref I176430

5x Assorted Welding and grinding Masks.
One Bohler Welding Big Vision grinding mask.
One electronic wrkding mask with no head harness.
One Tuff Sheild grinding mask.
Two basic welding masks.
All show industrial wear and usage.

AlpineStar AS100 Snow Chains, New

$98

Sold 24/05/2026

Skylarc Ref Q176386

AlpineStar AS100 Snow Chains.
12mm chain.
See photos for tyre size compatibility.
New unopened set, leftover retail stock, dusty case exterior from storage.
See the website below for further item specs:
https://hamco.co.nz/product/alpinestar-100/?srsltid=AfmBOoqnBCX6ffYlPfKbvEZeSXNsjKgtqJdZ9ckA2jcW8cv_iLdY1Cvj

6x Assorted Drill Chucks, 13mm & 16mm Varieties

$97

Sold 24/05/2026

Skylarc Ref C176398

6x Assorted Drill Chucks.
- 16mm Metabo Futro Keyless chuck with broken shank, needs repair, spare No.3 Tapered shank included for use in repairing.
- 5x 13mm Keyed chucks, three with keys, conditions vary from excellent to average

2x Magnetic Yellow Spinning Caution Lights by VisionAlert

$96

Sold 24/05/2026

Skylarc Ref H176377

2x Magnetic Yellow Spinning Caution Lights.
VisionAlert branded.
Made in the UK.
Both are 150mm tall and up to 200mm diameter at the rubberized magnetic base.
Powred by a standard 12V car socket plugs.

4 x Steel Work Stands

$91

Sold 24/05/2026

Skylarc Ref C175566

800mm long x 600mm wide x 960mm tall
Wooden tops

Seco Indexable Lathe Turning Tool PSSNR2020K12, New

$84.50

Sold 24/05/2026

Skylarc Ref C176372

Seco Indexable Lathe Turning Tool.
Part No. PSSNR2020K12.
20x20mm shank.
130mm length.
New unused tool with case.

Milwaukee Cordless M18 Compact Blower

$83

Sold 24/05/2026

Skylarc Ref A176396

Milwaukee M18 Compact Blower.
Model No.M18 BBL.
Auction includes tool only.
Tip attachments are missing.
https://www.milwaukeetool.co.nz/power-tools/job-site-clean-up/blowers/M18BBL-0.html

Assorted Tools

$81

Sold 24/05/2026

Skylarc Ref Z176369

Assorted Tools.
Bolt Cutters, hacksaw, glue gun, Incomplete 1/4" Drive sovket set, adjustable Wrenches, Clamps, and more, see photos.
Condition varies with each tool.

Makita Cordless 18V Impact Driver, Light, & Charger

$79

Sold 24/05/2026

Skylarc Ref C176476

Makita Cordless 18V Impact Driver, Light, & Charger.
Includes:
- Makita 18V LXT Impact Driver DTD-152.
- Makita 18V LXT light DML185.
- Makita 18V battery charger DC18RC

NOTE that there are NO batteries included with these tools! All items are untested as there is no batteries in this facility to test with. All items show industrial workshop wear and usage.

Custom.Built Heavy Duty Welding Trolley

$76.89

Sold 24/05/2026

Skylarc Ref D176321

Custom.Built Heavy Duty Welding Trolley.
40x40mm box steel frame, 3mm steel shelves and upper side panel with steel rod hooks for holding Cabling.
Welder platform 435x235mm.
Sturdy custom made unit.

Makita Corded Drill & Angle Grinder

$75.50

Sold 24/05/2026

Skylarc Ref T176441

Makita Corded Drill & Angle Grinder.
Includes:
- Makita 125mm Angle Grinder 9565PC. Grinder is missing disk guard and disk tool.
- Makita drill HP1630 with 13mm Keyed chuck.

Both tools operate but not tested at length or under load. Grinder motor sounds rough, see video. Drill seems better. Both show industrial usage and wear.

AlpineStar AS070 Snow Chains, 2x New Sets

$71

Sold 24/05/2026

Skylarc Ref S176388

AlpineStar AS070 Snow Chains.
2x New Sets in auction.
12mm chain.
See photos for tyre size compatibility.
New unopened leftover shop retail stock. Case exteriors dusty from storage.
https://hamco.co.nz/product/alpinestar-070/?srsltid=AfmBOoqrOkpZmvOTQ2Hgu2pUjZ3SC8QMhiRYfH8sMUUHIM699D9OkqXn

Makita Cordlews18V LXT Impact Driver & Hammer Drill Driver

$69

Sold 24/05/2026

Skylarc Ref G176454

Makita Cordlews18V LXT Impact Driver & Hammer Drill Driver.
Impact Driver is model DTD152
Hammer drill driver is XHP12.
Auction includes the two tools only.
No batteries available in this workshop so both Tools are untested.

2x Moore & Wright Vintage Outside Micrometers

$66

Sold 24/05/2026

Skylarc Ref W176366

2x Moore & Wright Vintage Outside Micrometers.
Both Cat No.941X.
Both 0" to 4" range.
Wooden cases.
Condition varies with each tool set. Black wood case tool set is very rusty but the gauge dial still turns smoothly. The brown wood case set shows lesser amounts of rusting. Both sets would benefit from a restoration.

6x Ramset & Hilti Caulking / Epoxy Applicator Guns

$63.58

Sold 24/05/2026

Skylarc Ref Q176438

6x Ramset & Hilti Caulking / Epoxy Applicator Guns.
- 2x Ramset Chemset Universal Applicator Premium guns.
- 3x Ramset dual piston Applicator Guns.
- 1x Hilti model HDM 500 Applicator gun.

All show industrial wear and usage. Dirty surfaces.

Materials Rack

$63

Sold 24/05/2026

Skylarc Ref W175508

Vertical steel materials rack

Blue Seal Vee Ray Deep Fryer

$59

Sold 24/05/2026

Skylarc Ref F176349

Model: Blue Seal Vee Ray GT46
Twin basket (no baskets)
Gas powered

2x AlpineStar AS210 Snow Chain Sets New

$58.50

Sold 24/05/2026

Skylarc Ref F176375

2x AlpineStar AS210 Snow Chain sets.
16mm.
See photos for compatible tyre sizes.
New unused leftover shop retail stock, dusty case exteriors from long term storage. One case has tear in canvas.
https://hamco.co.nz/product/alpinestar-210/?srsltid=AfmBOookhqx6ucl0Qv2ngH2IIEJclfEAOb7HhuWLpts0M67Fz_MGjsWg

Famous Toledo 9-Piece 8mm Number Punch Set

$57

Sold 24/05/2026

Skylarc Ref B176371

Famous Toledo 9-Piece 8mm Number Punch Set.
Part No.301618.
65mm punch lengths.
Punches appear as new unused. Plastic case exterior shows workshop storage wear.

2x Gas Bottle Trollies

$56

Sold 24/05/2026

Skylarc Ref O176410

2x Gas Bottle Trollies.
Both trollies are approx 550mm long, 620mm wide, 1400mm tall, with 380mm diameter pneumatic tyres.
Curved gas bottle frames 410mm wide.
Grey trolley has usable tyres but they could use some more air. Green trolley needs new tyres.

Heavy Dutyy Matetisls Storage Rack

$53

Sold 24/05/2026

Skylarc Ref Z176317

Heavy Dutyy Matetisls Storage Rack..
25x25mm box steel frame.
2mm thick steel sheet shelves.
Shelf spacing varies from 50mm to 150mm.
Items seen on Shelving NOT included.

Corded Router by Pentagon Power, Japan

$52

Sold 24/05/2026

Skylarc Ref F176427

Corded Router made in Japan by Pentagon Power.
Model No.PR930.
930W
2400rpm.
Older model that sounds like it has not been used much as motor runs very good, sed video.
Dusty surfaces from Workshop storage

2.5-Inch Drill w/ Modified Morse Taper No.4 Shank

$52

Sold 24/05/2026

Skylarc Ref I176404

2.5-Inch Drill with Morse Taper No.4 Shank.
Drill 450mm total length, approx 250mm cutting depth.
NOTE that the No.4 shank tip has been modified, see photos. cutting body in generally good condition.

Kincrome Lazy Tong Riveter

$51

Sold 24/05/2026

Skylarc Ref R176439

Kincrome Lazy Tong Riveter.
Specific model unknown.

Small Mobile Welding Trolley

$50

Sold 24/05/2026

Skylarc Ref S176414

Small Mobile Welding Trolley.
Front bracket can accommodate gas bottles 185mm diameter.
Rear Welder tray 400x160mm.
200mm dia sold rubber wheels.
Small but sturdy little Welding trolley.

Assorted 1/2" & 3/4" Drive Sockets & Wrench

$47

Sold 24/05/2026

Skylarc Ref A176448

Assorted 1/2" & 3/4" Drive Sockets & Wrench .
Large wrench is a 3/4" Drive.
2x 500mm long 1/2" Drive extensions.
- 11x 3/4" Drive Sockets, most are unbranded with a few others with Koken brand. Largest is 54mm.
Includes dented and dirty steel case.
See photos for further details on included items.

Dynamix Defender 650 Line Interactive UPS

$45.50

Sold 24/05/2026

Skylarc Ref H176351

Dynamix Defender 650 Line Interactive UPS.
Input 240VAC, 50Hz
Output 240VAC, 50Hz
Capacity 650VA, 390W.
Includes power cord.
See the manufacturer website below for further specs:
https://dynamix.co.nz/upsd650

Grandstream GRP2614 IP Phone w/ DP720 DECT Phone

$45.17

Sold 24/05/2026

Skylarc Ref I176352

Grandstream model GRP2614 Carrier Grade IP Phone.
Also includes Grandstream model DP720 DECT cordless Phone.
Both phones function normally.
Previously used in a workshop office so are a bit dusty and would benefit from a surface cleanup.
See the manufacturer websites below for further specs on both Phone models:

https://www.grandstream.com/products/ip-voice-telephony/dect-cordless/product/dp720

https://www.grandstream.com/products/ip-voice-telephony/carrier-grade-ip-phones/grp-series-professional-ip-phones/product/grp2614

Hydraulic Porta Power Parts

$43

Sold 24/05/2026

Skylarc Ref U175558

2 x pumps, neither seem to operate
Assorted attachments
Box

EasySteel WeldWell Vortex 70S Gas Metal Arc Mig Welding Wire, 1.2mm, 15kg

$42

Sold 24/05/2026

Skylarc Ref W176496

EasySteel WeldWell Vortex 70S Gas Metal Arc Mig Welding Wire.
1.2mm.
15kg
New unused roll. Box shows workshop storage wear.

Shimano Yak Altura Front Suspension Mountain Bike

$42

Sold 24/05/2026

Skylarc Ref N176461

Shimano Yak Altura Front Suspension Mountain Bike.
New Zealand design.
CR-MO metal frame.
Shimano Deore LX derailed and pedals and cranks.
Zone branded front suspension.
Rear tyre 26x1.95.
Both tyres approx 660mm diameter.
21-speed.
Approx 440mm frane size.
See photos for condition details.

AlpineStar AS220 Snow Chains, New

$37.01

Sold 24/05/2026

Skylarc Ref G176376

AlpineStar AS220 Snow Chains.
See photos for compatible tyre sizes.
New unused leftover shop retail stock. Case exterior dusty from long term storage.
See the website below for further item specs:
https://hamco.co.nz/product/alpinestar-220/?srsltid=AfmBOorAqhjtd-nYlMM3N5CqWJDmGULH_TXmrPf4JPS1FhS1i8MrdO-6

EasySteel WeldWell Vortex 70S Gas Metal Arc Mig Welding Wire, 1.2mm, 15kg

$36

Sold 24/05/2026

Skylarc Ref X176497

EasySteel WeldWell Vortex 70S Gas Metal Arc Mig Welding Wire.
1.2mm.
15kg
New unused roll. Box shows workshop storage wear.

Hydraulic Pipe Bender, Incomplete, Faulty

$36

Sold 24/05/2026

Skylarc Ref K176328

Hydraulic Pipe Bender.
ID label very worn so unable to decipher max capacity.
Includes 3x pipe bending attachments plus jack lever bar.
Hydraulic jack doess not seem to function. Many accessories and attachments are missing.

Single Phase Electric Induction Motor

$32

Sold 24/05/2026

Skylarc Ref Y176446

Single Phase Electric Induction Motor.
Unknown manufacturer and age.
250W output.
2.04A
240V
50 Hz
1440rpm
170mm length.
14mm diameter, 15mm long shaft.
Mounting base 150x110mm.
Shaft spins smoothly by hand.

2x 1200mm Box Beam Levels by DeWalt and Stabila

$31

Sold 24/05/2026

Skylarc Ref X176367

2x 1200mm Box Beam Levels by DeWalt and Stabila.
All have intact bubble vials.

Rebar Cutter

$31

Sold 24/05/2026

Skylarc Ref A175512

HKP Brand
Capacity 16mm
Made in Japan
In steel plate

Ryobi 4.8V Cordless Screwdriver Set CPD48N

$29

Sold 24/05/2026

Skylarc Ref B176475

Ryobi 4.8V Cordless Screwdriver Set CPD48N.
Includes charging cable and plastic case.
Some tip inserts are missing, see photos
Drill charges and operates, see video.

Large Aluminum Fuel Cell

$28

Sold 24/05/2026

Skylarc Ref P176333

A few dents and marks
Hole in side possibly for venting?
Internal baffles

Assorted Power Tool Accesories Handles, Guards, & More

$21

Sold 24/05/2026

Skylarc Ref A176422

Assorted Power Tool Accesories Handles, Guards, & More.
Branded items include Milwaukee, Makita Hitachi, Bosch.
See photos for what is included.

5x LED Monitors by HP and Samsung

$10.50

Sold 24/05/2026

Skylarc Ref Y176342

5x LED Monitors by HP and Samsung.
Includes:
- 2x HP model P24h G4, 23.8" IPS LED Monitors manufactured 04/2020.
- 1x HP model P22 G5, 21.5" IPS LED monitor manufactured 05/2023.
- 1x HP model P221, 21.5" LED monitor manufactured 06/2013.
- 1x Samsung model S24F350FHE, 24" LED monitor manufactured 02/2020.

All include power cords and video cables.
All previously used in a workshop office so are dusty and would benefit from a good surface cleanup. All were functioning normally when shut down for booking.

3x Gartner Zinc Padbolts, 150mm x 10mm, New

$6.50

Sold 24/05/2026

Skylarc Ref X176315

3x Gartner Zinc Padbolts, 150mm x 10mm.
New unused lot.

8x Assorted Empty Power Tool Cases

$1

Sold 24/05/2026

Skylarc Ref B176449

8x Assorted Empty Power Tool Cases.
Includes two Milwaukee, two Ramset, and one each of Evolution, Hitachi, Hikoki, and Stanley.
Condition varies with each case.
Some Cases include a few leftover tool accessories.
Original tools that were in these caese are missing.

Mobile Multi Purpose Trolley

$1

Sold 24/05/2026

Skylarc Ref A176370

Mobile Multi Purpose Trolley.
25x25mm box steel frame.
320mm diameter pneumatic tyres.
Black Rubber Paddled shelf 630x520mm and 700mm above floor.
Versatile trolley good for a mobile sign-in desk, or safety info stand, to name a few ideas.
See photis for further design detsils.
Would benefit from a cleanup and refinish.