Auction finished on Tuesday the 22nd of December 2020
Sold 22/12/2020
Skylarc Ref U120106
Wadkin Industrial Disk & Bobbin Sander.
Made in England by Wadkin.
Serial No. UTA 792
Test No. 55799
3-phase.
Left side has 760mm diameter sanding Disk with 860x430mm table.
Right Side has sanding Bobbin with 660x650mm table.
Includes assorted Bobbin accessories and parts, see photos.
Condition - Left side disk Sander operates normally. Right Side Bobbin Sander does not operate as some internal parts are missing as per staff comments.
To see this machine running:
https://youtu.be/LqaXGbaWq-c
Sold 20/12/2020
Skylarc Ref J120251
Model: Global ZXX6350G Drilling and Milling Machine
Three phase
8 vertical spindle speeds
115rpm - 1750rpm
No 4 morse taper vertical spindle
12 horizonal spindle speeds
40rpm - 1300rpm
NT30 horizontal spindle
Bed dimensions 1120mm x 260mm
Power feed X axis only
Easson ES-8 digital read out
Coolant pump
Horizontal arbor
Horizontal arbor support
Three phase
To see this machine running:
https://youtu.be/rDumqBQG50Q
Sold 22/12/2020
Skylarc Ref L120227
Model: Wadkin RS 250
Approx 2300mm between centres
2780mm overall bed length
250mm swing over bed
420mm long removable gap
400mm swing over gap
8 spindle speeds
200, 320, 500, 750, 960, 1440, 1850, 2800rpm
Fitted with traveling slide tool carriage
Tripod stand for outside turning on end of headstock
11 assorted tool rests
Turning faceplates with a range of threaded spindle thread fittings
To see this machine running:
https://youtu.be/tijfob6zZMI
Sold 20/12/2020
Skylarc Ref Z121307
Mini sand mixing machine
Three phase
2.2kw motor
170mm outer diameter x 390mm long
135mm Inner diameter
Includes mixer, hoses and control box
Hopper above machine not included
Will be uninstalled for collection
Sold 21/12/2020
Skylarc Ref B120243
Model: Hudustan Machine Tools (HMT) FN2U Universal Milling Machine
Bed dimensions 1520mm x 310mm
X axis travel 800mm
Y axis travel 265mm
Z axis travel 400mm
250kg max load on table
Power feeds
18 feed rates, 16-800mm/min
18 spindle speeds 56 - 1800 rpm
Horizontal and vertical heads
Offset head
ISO 50 spindle
Three phase
Manual
Lock down kit
Main motor 5.5kw
To see this machine running:
https://youtu.be/PnczqNQtsTQ
Sold 21/12/2020
Skylarc Ref Y121150
Model: Miller Dimensions 1250
DC submerged ARC welding power supply
1200 amps welding output
Three phase
Currently used for gouging
Includes gouging torch and cables
Crane arm not included
Sold 20/12/2020
Skylarc Ref K120486
Nilfisk CFM 3707/10 Industrial Vacuum.
Moble unit on 4 wheels.
7.5kW Motor.
3 Phase, 400V, 15.5A, 50Hz.
175 Litre Capacity.
Comes with filter (unknown condition).
Please see photos for plug type etc.
Sold 22/12/2020
Skylarc Ref L121059
Morris 2000kg gantry crane
Approx 7.4 metres wide
Approx 25 metres of I Beam rail
Buyer can leave rails if not required
Powered in all directions
Telemecanique control pendant
Complete system
Manufactured by P & W Engineering
To see this machine running:
https://youtu.be/jkQFgIydoeY
Sold 20/12/2020
Skylarc Ref U120574
Model: Reed Guncrete Lova 16-6R 1260-V06
Pneumatic concrete spraying machine
Fitted with refractory hopper and accessories
Appears to have had very little use
For more information see:
https://www.minovaglobal.com/media/4zsijix2/lova-gunite-machine.pdf
Sold 20/12/2020
Skylarc Ref Q121194
Capacity of approx 2.5 tons per hour
Storage hopper
Attridder mixes and crushes sand
Fluid bed cooler classifier
Reverse pulse dust collector
Manual
This machine will be electrically disconnected but the buyer will need to organise disassembly for removal.
Sold 21/12/2020
Skylarc Ref V120237
Beautiful cast iron shelf edges
Timber centers
Threaded uprights with flared feet
Probably cast here at the historic Hillside workshops
An awesome industrial piece of furniture in need of a bit of a cleanup
Sold 20/12/2020
Skylarc Ref R121195
Open sided 20 foot container shed
Roll out fibreglass roof on cables and wheel
Small swing arm on side
Lights and power
Contents not included
Roof and support structure will need removal for transport
Will be electrically disconnected for collection
Buyer will need to disassemble
Sold 21/12/2020
Skylarc Ref J120719
Heavy Duty Antuiqe Vintage Workshop Workbench.
Age of unit is unknown. The stylized heavy Steel or wrought iron support frame might suggest early 1900's? See photos.
50mm thick lower wood shelf.
50mm thick wood top covered with a removable steel sheet surface.
Condition - An old well used classic Workbench, great for regular usage or for restoration.
Sold 22/12/2020
Skylarc Ref C120244
Model: Hudustan Machine Tools (HMT) LB25
Approx 1600mm between centres
Bed length 2200 (including gap)
Approx 360mm swing over gap
Approx 270mm swing over bed
Approx 150mm swing over cross slide
50mm spindle bore
18 spindle speeds
32rpm - 1600rpm
Metric and imperial thread cutting
Chuck guard
Foot brake
250mm three jaw chuck
350mm four jaw chuck
Extra 270mm three jaw chuck
To see a video of this machine:
https://youtu.be/9Bvi-qMMzRA
Sold 21/12/2020
Skylarc Ref X120239
Model: Hudustan Machine Tools (HMT) Type 333
Three phase
Bed dimensions 700mm x 300mm
X axis travel 400mm
Y axis travel 200mm
Z axis travel approx 200mm
12 spindle speeds
40, 56, 80, 112, 150, 220, 300, 400, 580, 850, 1160, 1700rpm
Spindle movement 320mm
Power feed spindle
No 4 morse taper spindle
Includes mill lockdown kit
Coolant pump missing
To see this machine running:
https://youtu.be/le2qNW3f4js
Sold 21/12/2020
Skylarc Ref T120703
ARL Metals Analyzer 3460 Optical Emission Spectrometer.
Serial No. 3460-254.
Can read ferrous and non ferrous metals.
Setup samples for steel and iron programs included.
Includes assorted manuals.
Includes Power Conditioner Unit.
Oxsas 2.5 software installed on Included computer.
HP EliteDesk desktop computer with Intel Core i5-7500 at 3.40Ghz, 8Gb RAM.
Optics have been professionally locked for transport.
Unit was serviced by Thermo Fisher.
Sold 20/12/2020
Skylarc Ref Y120370
DMF-42 - Pedestal Mill Drill - Geared & Tilting Head.
Geared head drill & mill machine
No.3 morse taper spindle.
6 drilling speeds from 95-1600rpm.
Mill head tilts to ±90º.
Milling table size: 585 x 190mm.
Milling table travels 370 x 175mm.
Drill travels: 0-130mm.
Emergency stop switch and overload protection.
14mm T slotted work table and base.
1.1kW 240V motor.
Sold 22/12/2020
Skylarc Ref H120379
45 Ton Shop Press
Unknown Chinese Brand
2 Rams: Right/Centre is Pneumatic/Manual (lever) powered and left one is powered independently (hydraulic - unknown capacity).
Adjust able height platform: 550mm to 1240mm.
Platform Dimensions: L820mm x W380mm.
Sold 20/12/2020
Skylarc Ref Z121073
Cast iron ends
Timber top (in unknown condition)
Covered with approx 3mm steel cover
Approx 10mm steel plate on top
Contents not included
Impressive cast ends probably made in the historic railway workshops
Sold 21/12/2020
Skylarc Ref P121167
Vintage cast and timber workbench
Cast iron ends
Heavy timber top
Irwin No.6 vice in poor condition
Likely made in Dunedin's railway Workshops near the turn of the 19th of century
Top needs a fair bit of work but otherwise an impressive piece
Sold 20/12/2020
Skylarc Ref G119884
Dominion 30" Industrial Band Saw.
Manufactured in England by Dominion.
Model - 30"
Serial No. 388.
Steel table approx 840mm x 810mm.
Adjustable table angle.
To see this machine running:
https://youtu.be/devdF6mzg9E
Sold 20/12/2020
Skylarc Ref S120104
500mm Industrial Workshop Wood Planer.
Unknown manufacturer.
Model No. NB105.
Single phase 240V, 14.6A.
Manufactured July 2008.
Approx 500mm max cutting width.
To see this machine running:
https://youtu.be/rfTuvTQ0p1g
Sold 22/12/2020
Skylarc Ref V120107
Topmaq 12" Industrial Grade Arbor Table Saw.
Model No. MBS300S.
Manufactured 2008.
Single phase.
12" (300mm) cutting blade
Steel table approx 960x755mm.
Slide rails along side steel table are approx 1700mm in length with a scale ruler measuring up to 127cm attached.
Rolling side support table at end mounted on a 2100mm long rail. This secondary table is approx 785x760mm.
Includes black case with assorted tools.
To see this machine running:
https://youtu.be/Xp5YOq2imgo
Sold 21/12/2020
Skylarc Ref S121196
Open sided 20 foot container shed
Roll out fibreglass roof on cables and wheel
Lights and power
Roof and support structure will need removal for transport
Will be electrically disconnected for collection
Buyer will need to disassemble
Sold 21/12/2020
Skylarc Ref R120701
Heavy Duty Antuiqe Vintage Workshop Workbench.
Age of unit is unknown. The stylized heavy Steel or wrought iron support frame might suggest early 1900's? See photos.
50mm thick lower wood shelf.
50mm thick wood top covered with a removable steel sheet surface.
Includes attached Record No. 36p Vice with 155mm wide Jaws.
Wood board back wall for hanging items is approx 1370mm long, 580mm high.
Note - Other items seen on lower shelf and around Workbench are NOT Included.
Condition - An old well used classic Workbench, great for regular usage or for restoration.
Sold 22/12/2020
Skylarc Ref C121258
Krautkrammer Branson Ultrasonic Flaw Detector.
Model No. USN52R.
Includes the following Transducer units:
- 2x type B2S-N
- 1x B4S
- 1x SEB4-0
- 1x MB4S-N
- 1x MB2S-N.
- 1x MSEB4
- 1x WB45-N2
- 1x MWB45-N4
- 1x 2MHZ 24mm
Also includes steel unit in Wood Case 335x135x55mm.
Includes, user manual, soft case, assorted variety of cables and other accessories, see photos for further details.
Condition - Unit and its accessories show industrial wear and use. Unit appears to operate normally, transducers and accessories not tested. Case shows moderate wear.
Sold 20/12/2020
Skylarc Ref Z120085
Large Workshop Welding Table.
Steel frame with wooden top.
Includes 1 drawer and 2 vices and a welding plate on top.
Record vice 180mm.
Record vice 200mm.
Welding plate dimensions: 910mm x 755mm x 20mm.
Does not include loose items in, on or around this unit.
Sold 22/12/2020
Skylarc Ref L120123
Industrial Heavy Duty Pallet Racking Components.
Includes the following components:
- 3x 3050mm high, 1000mm wide blue vertical frames.
- 2x 3660mm high, 1000mm wide Galvanized vertical frames.
- 12x 2730x90x40mm orange horizontal beams.
- 10x 2730x95x50mm orange horizontal beams.
- 4x 2730x90x45mm orange horizontal beams.
- 2x 2730x140x50mm orange horizontal beams.
2x 1250x1010mm Steel wire Shelving Units.
- 3x 2720x1000x25mm MDF Shelving boards.
- Assorted lengths of other Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 21/12/2020
Skylarc Ref W121590
Industrial Workshop Paint Booth/Bay.
Includes: Conveyor Rollers (4 Parts - U Shape set up with swivel base set up in middle).
Extraction system at back of unit.
SWL/Pacific Hoists/ 1 Ton I beam guide and roller with ID Neuhaus Mini 1000 Pneumatic powered crane.
Compressed air line mounted to frame of unit and conveyors
Buyer will need to disassemble for removal
Does NOT include cabinets, cupboards, or items sitting in, on and around unit on outside.
Dimensions set up: 8100mm x 4900mm x 2920mm (115.8M³).
Sold 22/12/2020
Skylarc Ref K121162
Wall mounted jib crane
4850mm long boom
1 Ton capacity
6 metre lift
Heavy duty mounting brackets
Hitachi 1SNH electric chain hoist
Manufactured 2018
1 Ton capacity
Hitachi 1ET
Powered I Beam trolley
Fitted with Juuko HS series remote control system
To see this machine running:
https://youtu.be/oXqG4oN6_2I
Sold 21/12/2020
Skylarc Ref N120801
Model: Adolf Berger Select SB-4
Three phase
Table dimensions 495mm x 495mm
Tilting table
Max workpiece height 240mm
Variable speed
Built in grinder and welder
Guide rollers need replacement
Motor broke shaft
Replacement motor and controller include with the machine but not installed
Sold 20/12/2020
Skylarc Ref W120108
Wadkin Industrial Wood Planer Thicknesser.
Made in England by Wadkin.
Model No. RMA842.
400V, 3-phase.
Cutting cylinder 460mm long.
Work Table 1855mm long, 510mm wide.
Age of unit is unknown.
To see this machine running:
https://youtu.be/mbLqzMvbZMc
Sold 21/12/2020
Skylarc Ref A120086
Samco LP-15 Vertical Oscillating Bench Bobbin Sander.
2 speed settings, up and down function.
70mm sanding spindle.
20Amp, 3 Phase
Output to vacuume.
Bench dimensions: 800mm x 800mm.
Adjustable bench angle.
Includes replacement bobbins, and sanding tubes. (34 Pieces).
To see this machine running:
https://youtu.be/I9qlalYdETo
Sold 21/12/2020
Skylarc Ref L121657
Large demag gantry crane crab trolley
8000 kg capacity
Distance inside of wheel rims 1770mm
Approx 55mm wide wheel track
Unknown reach but estimated 8 metres
7.1 kw three phase motor
Straight out of work
Sold 20/12/2020
Skylarc Ref K121578
5 metre long gib crane
One ton capacity
Model 1SNH
Hitachi one ton electric chain hoist
6 metre lift
Manufactured 2016
Hitachi electric carriage
Model 1ET
Manufactured 2017
Fitted with Juuko remote control system
Three phase 20 amp plug
Very tidy machine straight out of work
Sold 20/12/2020
Skylarc Ref K120122
Industrial Heavy Duty Pallet Racking Components.
Includes the following components:
- 3x 3050mm high, 1000mm wide blue vertical frames.
- 2x 3660mm high, 1000mm wide Galvanized vertical frames.
- 14x 2730x90x40mm orange horizontal beams.
- 10x 2730x95x50mm orange horizontal beams.
- 8x 2730x90x45mm orange horizontal beams.
8x 1250x1010mm Steel wire Shelving Units.
- 6x 2720x1000x25mm MDF Shelving boards.
- Assorted lengths of other Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 22/12/2020
Skylarc Ref E120714
Ingar PL-200 Industrial Surface Grinder Polisher.
Made in Spain by Ingar.
Model No. PL-200
3-Phase 16A, 500V power plug.
300x150mm Polishing surface.
Includes approx 50x Assorted grit 300mm diameter sanding/Polishing pad sheets.
Condition - Unit shows typical industrial wear and usage. Grinding dust buildup within collection bin.
Sold 20/12/2020
Skylarc Ref H120873
Hilti PRE 3 Rotary Laser Level Kit w/ Case.
Includes:
- PRE 3 laser level unit.
- PRA 84G Li-Ion battery pack.
- PRA 85 battery charger.
- PRA 31 Laser Reciever unit.
- PRA 80 Reciever Holder.
- Plastic hard case.
Condition - Dusty from workshop usage.
Sold 21/12/2020
Skylarc Ref M120488
Lincoln Electric DC400 Welding Source & LN-8 Wire Feeder.
Idealarc DC400 multi-process welder with multi-process switch.
Processes: Stick, TIG, MIG, Flux-Cored, Gouging.
Input: 230V, 460A, 3 Phase, 60Hz.
Output range: 60-500A, 12-42V, Rated: 400A, 36V.
LN-8 Semiautomatic Wire Feeder.
controlled wire feed speed and voltage during starting for clean, positive starts and reduced stubbing, skipping and spatter.
Sold 21/12/2020
Skylarc Ref I120120
Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 3x 3050mm high, 1000mm wide blue vertical frames.
- 1x 3660mm high, 1000mm wide Galvanized vertical frame.
- 6x 2730x90x40mm orange horizontal beams.
- 6x 2730x95x50mm orange horizontal beams.
- 2x 2730x110x50mm orange horizontal beams.
- 4x 2730x140x50mm orange horizontal beams.
12x 1250x1010mm Steel wire Shelving Units.
- 3x 2720x1000x25mm MDF Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 20/12/2020
Skylarc Ref J120121
Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 1x 3050mm high, 1000mm wide blue vertical frame.
- 2x 3660mm high, 1000mm wide Galvanized vertical frames.
- 2x 4270mm high, 1000mm wide blue vertical frames.
- 12x 2730x90x40mm orange horizontal beams.
- 12x 2730x95x50mm orange horizontal beams.
- 4x 2730x140x50mm orange horizontal beams.
14x 1250x1010mm Steel wire Shelving Units.
- 7x 2720x1000x25mm MDF Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 21/12/2020
Skylarc Ref Z120943
Conco Balance Master Gib Crane
Total length 3200mm
Folded length 1900mm
Capacity 1000 pounds
Yale Eaton pneumatic hoist
Unknown capacity
Will be decommissioned for collection
To see this machine running:
https://youtu.be/Z0pa13JiSio
Sold 22/12/2020
Skylarc Ref B120373
Tooline MBS1 Metal Cutting Bandsaw.
90° Cutting capacity: 180mm.
45° Cutting capacity: 110mm.
Blade speed: 34,41,59,98m/min.
Blade length: 2360mm.
Motor: 750W, 1HP, 240V, 50Hz, Single Phase, 10A.
Coolant pump.
Sold 21/12/2020
Skylarc Ref J120095
Wadkin Bursgreen BZG 62405 Tool Grinder.
Make: Wadkin Bursgreen.
Model: BZG 62405.
3 Phase, 360/420V, 50hz.
Incorparating two spindles with five grinding, stropping wheels, etc, general purpose and screw adjusted tool rests. Spindle speeds 300 and 2000 rpm. 0.75 kW (1HP) (3 phase). Capacity: Admits oil stone and emery wheel 200 mm (8") dia x 19 (2") mm wide, stropping wheel and 76 mm x 127 mm (3" x 5") long grinding cone for gouges.
When decommissioned will not come with a plug.
Sold 22/12/2020
Skylarc Ref O121270
Approx 4700mm long jib
Hitachi 1/2SNH2
Three phase
6 metre lift
500kg capacity
Manufactured 2012
Will be uninstalled for collection
Vertical stand not included
To see this machine running:
https://youtu.be/GsXOCS0q_ks
Sold 22/12/2020
Skylarc Ref G121184
Large steel bag house
Unknown capacity
Approx 8 metres tall
Box dimensions 2200mm x 2200mm x approx 2900mm tall
Will need to be dismantled for transport
You will need to submit a job safety analysis with safe methods for removal of this machine.
Sold 20/12/2020
Skylarc Ref G121729
Steel Rack
4230mm long x 700mm wide x 1600mm tall
Wide range of steel lengths including
15 assorted lengths of pipe
7 x 20mm diameter x 6050mm long lengths bar
6200mm long length of railway iron
Assorted galv lengths
Various random other lengths
Sold 21/12/2020
Skylarc Ref G120378
Weldwell Steady Mig 322/4WD.
Power Source:
Weldwell Steady Mig 322 on wheels.
Input: 30Amp, 15.5V (3 Phase 500V)
Max output: 320Amp, 30V.
Variable Amp and Speed.
Wire feeder.
Weldwell Steady Mig 4WD wire feeder on wheels, including gas torch, earth clamp, hose.
Sold 21/12/2020
Skylarc Ref S121040
Justrite Flammable Liquid Storage Cabinet 250L.
3 Shelves.
Doors automatically close.
Justrite
Sure-grip® ex
45 gal capacity 250 liter capacity
Austrite mfg. Co rew. M
N.F.P.A. Code 30 osha regulations
Sold 20/12/2020
Skylarc Ref Z120215
Alfred Herbert Drill Press
Belt drive
6 speed
230rpm - 2050rpm
Heavy duty plate work table
760mm x 610mm x 12mm thick
Adjustable height max height 970mm
Min height 390mm
Three phase 20 amp plug
Beautiful old machine in great shape
To see this machine running:
https://youtu.be/NWx5jW-NGOM
Sold 21/12/2020
Skylarc Ref A120112
Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 6x 2440mm high, 1220mm wide blue vertical frames.
- 20x 2670x95x50mm orange horizontal beams.
- 12x 1380x95x50mm orange horizontal beams.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 22/12/2020
Skylarc Ref D120115
Industrial Heavy Duty Pallet Racking Components
Includes the following components:
3x 3050mm high, 1000mm wide blue vertical frames.
1x 3660mm high, 1000mm wide Galvanized vertical frame.
6x 2730x90x40mm orange horizontal beams.
14x 2730x95x50mm orange horizontal beams.
4x 2730x140x50mm orange horizontal beams.
20x 1250x1010mm Steel wire Shelving Units.
3x 2720x1000x25mm MDF Shelving boards.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 21/12/2020
Skylarc Ref H121393
Spectroline uVision 365 Deluxe UV-A Ultraviolet LED NDT Industrial Inspection Lamp.
Lamp model No. UV-365SBLC.
AC Power supply Part No. 130260.
Includes semi-hard case.
Condition - Shows some external scratches, dust etc from industrial usage.
Sold 21/12/2020
Skylarc Ref K121266
Morris electric chain hoist
500kg capacity
Electric I-beam trolley
5.1 metre long jib
Power cable reel on mount
Vertical stand not included
Will be decommissioned for collection
To see this machine running:
https://youtu.be/wHBQr230y8Y
Sold 20/12/2020
Skylarc Ref X120161
Huge Lot of Metal Numbers & Letters w/ Wooden Storage Drawer Unit.
Aluminium numbers and letters in varying sizes from approx 8mm high up to approx 55mm high.
Some are weld or solder on type, others have pointed ends for hamnering onto wood etc.
Includes custom built wooden storage drawer unit.
Thousands of individual units within drawers.
Sold 21/12/2020
Skylarc Ref B121309
5 ton gantry crane
SWL 5 ton (formerly 7.5 has been down rated)
Power traverse on large rails
Has full remote control
Cab not in use, unsafe condition
Runs well with remotes
Approx 18 metres long (between rails)
Rails not included
Buyer will need an approved contractor and safety plan for removal
Sold 20/12/2020
Skylarc Ref K120096
Antique NZR Hillside Workshops Cast Iron Laminating Press.
Manufactured by New Zealand Railways.
Dated 1879 Hillside Workshops.
Lifts to 110mm.
Sitting wooden stand.
Auction includes the press and its wood stand only, does NOT include items in or or around the wooden stand.
Sold 22/12/2020
Skylarc Ref V121511
Atlas Copco Pneumatic Air Hammer.
Type No. TEX 12PS KL.
Manufactured in 2013.
Includes attached chisel bit.
See the Atlas Copco Web link below for further item details:
https://www.atlascopco.com/en-au/construction-equipment/products/handheld/hammers/pneumatic-hammers/tex12pskl
Sold 22/12/2020
Skylarc Ref H120119
Industrial Heavy Duty Pallet Racking Components.
Includes the following components:
3x 3050mm high, 1000mm wide blue vertical frames.
12x 3660mm high, 1000mm wide Galvanized vertical frame.
10x 2730x90x40mm orange horizontal beams.
8x 2730x95x50mm orange horizontal beams.
6x 2730x140x50mm orange horizontal beams.
16x 1250x1010mm Steel wire Shelving Units.
4x 2720x1000x25mm MDF Shelving boards.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 21/12/2020
Skylarc Ref Q121298
Vintage Antique Cast Steel "Litter" Bin Plant Pot.
Cast Steel, or iron, construction.
Very heavy! Estimate approx 300kg at least.
Age of item is unknown. Located within the old Hillside rail yards so potentially a remnant from the heyday of locomotive and carriage construction?
The word "Litter" is moulded into the side so apparently was originally used as a rubbish bin. Currently being used as a large planter that will never blow away in the wind!
Note that buyer will need an appropriate vehicle or trailer to handle the weight of this item.
See our other listings for two matching units.
Sold 22/12/2020
Skylarc Ref G120898
Wall Mounted Storage Units (Assorted Nuts, Bolts Miscellaneous Parts).
Large lot of wall mounted storage units. Containing various miscellaneous items including but not limited to:
Nuts, Bolts, Washers, Nails, Rivets, Couplings, Pipe Fittings etc.
Please note that this lot is strictly for items on/in storage containers or just below.
Sold 22/12/2020
Skylarc Ref R120623
Wilson 2000 litre plastic water tank
Mounted on heavy duty steel frame
Plastic forkliftable base
Unknown specification high pressure water pump
Electrical system for feeding multiple outlets
Three phase 32 amp plug
Formerly feed multiple water misting units
Will be decommissioned for collection
Sold 22/12/2020
Skylarc Ref U119898
Vintage Wood Workshop Workbench w/ Vice.
Includes attached Record brand vice model No. 52 1/2 E.
Dual level top work surface, see photos.
565mm high back panel.
Note - Auction is for Workbench and vice only, all other items seen on, in and around unit are NOT Included.
Sold 21/12/2020
Skylarc Ref C120556
Atlas Copco Standard Pneumatic Hammer.
Model No. TEX 12PS KL.
Manufactured in 2014.
See the Atlas Copco Web link below for further item details:
https://www.atlascopco.com/en-au/construction-equipment/products/handheld/hammers/pneumatic-hammers/tex12pskl
Sold 22/12/2020
Skylarc Ref J121395
Handy Magna MP-A2 Electromagnetic Yoke.
240v, 50Hz, 2.8A.
Manufactured 2017.
Includes the following accessories:
- Hard case.
- Calibrated magnetometer gauge.
- 4.5kg MPI Test Block.
- Glass testing tube with metal stand.
Condition - Tool shows typical industrial wear and usage, see photos. Original case appears unused. Accessories show varying levels of use.
Sold 21/12/2020
Skylarc Ref R120129
Industrial Heavy Duty Pallet Racking Components.
Includes the following components:
- 3x 3050mm high, 840mm wide Galvanised vertical frames.
- 12x 2730x90x50mm orange horizontal beams.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 21/12/2020
Skylarc Ref Z120371
BOC Smootharc Advance MIG 275C.
275Amp welding output.
Built in wire feeder.
3 Phase 63A, 200-250V, 50/60Hz.
Does NOT include compressed Gas Bottle.
Includes, welding torch, ground clamp and welding mask.
Sold 20/12/2020
Skylarc Ref Z121515
Heavy Steel Workshop Workbench.
15mm thick plate steel top surface.
Heavy steel frame.
990x265mm steel back plate.
Irwin X305 bench vice attached with 150mm wide Jaws.
Steel bracket welded to top surface, see photos.
4-plug single phase power outlets attached underneath.
Note - All items seen around and on Workbench are NOT Included.
Sold 20/12/2020
Skylarc Ref M119890
Industrial Twin Ended 620mm Diameter Disk Sander.
3 Phase 20A, 500V, 50Hz.
Unknown manufacturer and model.
Uses 610mm diameter disks.
Adjustable angle tables each 815x360mm.
To see this machine running:
https://youtu.be/0Q_hAwR6pXI
Sold 21/12/2020
Skylarc Ref L121137
Stack of 6 Heavy Duty Industrial Steel Plate Pallets.
25mm thick steel plate.
Condition - moderate surface rust, some of the plates are slightly bent.
Individual dimensions ~ 2200mm x 1000mm x 140mm.
Sold 22/12/2020
Skylarc Ref R119895
Vintage Wooden Workshop Workbench w/ Record Vice.
Thick 90mm top with a cut out lowered section, see photos.
Includes attached Record branded Vice model 52 1/2 E.
Single front drawer.
360mm high back panel.
Note - Auction is for Workbench and vice only, all other items seen on, in and around unit are NOT Included.
Sold 20/12/2020
Skylarc Ref J121161
Model: Stratalign HH-B
1 Ton capacity
6 metres of lift
3.5 metres p/minute
Powered I Beam trolley
Schneider XAC-A05 pendant
Three phase 20 amp plug
To see this machine running:
https://youtu.be/NgkmutCKKiI
Sold 20/12/2020
Skylarc Ref O119892
Vintage Workshop Wooden Workbench w/ Wood Vice.
Includes attached Kindt-Collins Vice with 45mm diameter Jaws.
Top work surface has two levels, front level of thick wood at 290mm width. Rest of work surface is 70mm lower and is of thinner wood boards, 475mm width.
420mm high back side panel.
Single front drawer.
Note - Auction includes workbench and vice only, all other items seen on, in, and around unit are NOT Included.
Sold 22/12/2020
Skylarc Ref X121902
Ripack 3000-10 Heat Shrink Gun.
Ideal for heavy use for pallets wrapping, building containment, winterising boats and protecting large industrial areas.
These tools are used in a number of sectors such as manufacturing, construction, agri-food and transport/logistics.
Power consumption 45 to 80 KW.
Ergonomics dual-material handle.
Weight1220 g.
Sold 22/12/2020
Skylarc Ref M120124
Industrial Heavy Duty Pallet Racking Components.
Includes the following components:
- 4x 3050mm high, 840mm wide Galvanised vertical frames.
- 16x 2730x90x50mm orange horizontal beams.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 22/12/2020
Skylarc Ref T121846
6x Heavy Steel Industrial Materials Bins.
All are roughly similar in dimensions. Each approx 1010x960x460mm.
4x units with steel bar floor, 2x units with steel plate floor.
Interior areas of each are approx 925x870x300mm.
Condition - Old units showing heavy usage. Very rusty. Two with damaged support feet.
Sold 22/12/2020
Skylarc Ref A121490
Heavy Steel Plate Workshop Platform.
20mm thick plate steel with old railroad rails Welded to bottom as support feet.
Multi Purpose unit that can be used as a heavy duty platform or converted into a heavy Workbench if legs were added.
Rusty surfaces from age and usage.
Sold 21/12/2020
Skylarc Ref L120097
GMF (Mark 5) 8" Heavy Duty Single Phase Grinder Mounted to Workbench.
Duel Rotor, .75HP, 220/240V, 50Hz, Single Phase, 2850RPM.
Steel frame construction workbench with steel top and wooden bottom shelf.
Bench Dimensions: 1530mm x 610mm x 815mm.
Sold 20/12/2020
Skylarc Ref M121658
Large demag gantry crane crab trolley
8000 kg capacity
Distance inside of wheel rims 1770mm
Approx 55mm wide wheel track
Unknown reach but estimated 8 metres
7.1 kw three phase motor
Straight out of work
Sold 20/12/2020
Skylarc Ref N120879
Model: Atlas Copco GA 708 PACK
70847 hours on the clock
Max working pressure 8 bar
122 litres per second free air delivery
Has oil leak but otherwise runs
Will be decommissioned for collection
Sold 21/12/2020
Skylarc Ref G121392
Spectroline AccuMax XRP-3000 Radiometer Photometer Kit.
Made in USA.
Includes:
- AccuMax Readout Unit model XR-1000.
- AccuMax Dual Wavelength Sensor model XDS-1000.
- Sensor extension cable XCB-100.
- Aluminium padded hard case.
Condition - Unit appears as new condition, very few visible signs of usage. Hard case exterior shows some minor marks and dust etc.
Sold 20/12/2020
Skylarc Ref I121264
Model: Ingersoll Rand SSR-EP125/50
552 CFM capacity
Manufactured 1995
Rotary screw compressor
Compressor motor is blown
Had a rebuilt air end approx one year prior to motor failure
Will be decommissioned for collection
Sold 21/12/2020
Skylarc Ref D120947
Large Nomad worksite electrical safety power box
6 x 10 amp single phase outlets
3 x 15 amp single phase outlets
16 amp caravan type single phase outlet
3 phase 32 amp outlet
2 x 32 amp three phase inlets
2 metre power cable with 3 phase 32 amp plug
Sold 22/12/2020
Skylarc Ref G121600
Vintage Antique Cast Steel "Litter" Bin Plant Pot.
Cast Steel, or iron, construction.
Very heavy! Estimate approx 300kg at least.
Age of item is unknown. Located within the old Hillside rail yards so potentially a remnant from the heyday of locomotive and carriage construction?
The word "Litter" is moulded into the side so apparently was originally used as a rubbish bin. Currently being used as a large planter that will never blow away in the wind!
Please note that buyer will need an appropriate vehicle or trailer to handle the weight of this item.
See our other listings for two other matching units.
Sold 20/12/2020
Skylarc Ref D121285
Industrial Dust Collector System by Calibur Woodworking.
Model No. XCAE002.
Manufactured 03/2007
Single phase 250V, 20A plug, see photos.
Dusty from use. A few dents in casings.
Sold 20/12/2020
Skylarc Ref Q120128
2500kg Capacity Pallet Jack.
Unknown manufacturer and model.
2500kg Lifting capacity.
Fork length 1150mm.
Each fork is 160mm wide, gap between forks is 235mm.
Total jack width is 555mm.
Fork surface height from approx 85mm and raises up to approx 190mm.
Sold 20/12/2020
Skylarc Ref A121126
Zenith Autoboil Wall Mounted Water Boiler.
Model AB003.
3L capacity.
1500W.
The unit measures approx 290x180x430mm. Depth including faucet is approx 275mm.
Condition - Unit appears to be very recent showing few minor use marks. Unit will be decommissioned before buyer pickup.
Sold 22/12/2020
Skylarc Ref R121663
Industrial Steel Plate Workbench with Vice.
Steel box frame construction.
10mm thick steel plate top.
Irwin Record Vice (150mm grip, opens to 210mm).
Condition - minor surface rust and marking, corner has small square cut out (see photos).
Sold 20/12/2020
Skylarc Ref G121496
Outside Micrometer Set 150-300mm by Insize.
Set Code No. 3203-3006A.
Includes Micrometers with ranges from 150mm up to 300mm.
Includes accessories.
Includes hard case.
Condition - Each Micrometer has hand written number in marker, see photo, otherwise items show no visible signs of use and appear as new. Case exterior appears near new with the exception of a few minor surface marks.
Sold 22/12/2020
Skylarc Ref D120583
Mobile Industrial Material Hopper Bin.
5mm thick plate steel hopper walls.
140mm Castor wheels.
Bottom drain hole approx 135mm diameter.
Inner hopper dimensions (excluding angled lower section) is approx 907x893x727mm.
Condition - Unit has been used for various foundary sands.
Sold 20/12/2020
Skylarc Ref G120820
8mm plate steel top
860mm worktop height
2 drawers with contents of files and air tool parts
Steel back board
Built in power plugs
Box steel frame
Contents of pipe fittings, extension cords and industrial supplies
Sold 21/12/2020
Skylarc Ref R121715
Telecrane F25-10D Transmitter and Receiver.
Microprocessor controlled PLL synthesizer (160 Channels).
FCC Part 15 (50mV/meter field strength).
Durable casing with extra shock resistance (IP65).
Temperature Range: Range:-49°F to 185°F (-40°C to +85°C).
Please see photos for more specifications.
Please note photos are indicative.
Sold 20/12/2020
Skylarc Ref C120114
Vintage Industrial No. 3 Wood Trimmer by Oliver.
Made in Grand Rapids Michigan, USA by Oliver Machinery Co.
Dated May 1, 1893(?) see photo.
Model No. 3.
Steel table measures approx 880x460mm.
Approx 700mm diameter base.
Cutting blades at 45 Degree angle.
Vertical cutting gap approx 170mm.
Condition - Unit appears to still operate smoothly, Blades still sharp. Crank wheel missing a wood handle. Dusty with sawdust.
Would make a great restoration piece or museum display.
Sold 21/12/2020
Skylarc Ref V120861
Stahl SC02 250kg Electric Chain Hoist.
Made in Germany.
Type No. SC0202-8/2 1/1.
Manufactured 11/2014.
250kg capacity.
Chain type 4x11T.
Chain length unknown.
Pendant control unit is NOT Included.
Sold 20/12/2020
Skylarc Ref U121718
Telecrane F25-10D Transmitter and Receiver.
Microprocessor controlled PLL synthesizer (160 Channels).
FCC Part 15 (50mV/meter field strength).
Durable casing with extra shock resistance (IP65).
Temperature Range: Range:-49°F to 185°F (-40°C to +85°C).
Please see photos for more specifications.
Please note photos are indicative.
Sold 22/12/2020
Skylarc Ref Z120111
JBS Industrial Workshop Raising Platform Trolley.
JBS branded, model unknown.
Lifting platform approx 910x500mm.
Platform height adjustable from approx 365mm up to approx 1320mm.
Push handle 970mm high.
Max weight capacity is unknown.
Sold 22/12/2020
Skylarc Ref J120433
JBS Industrial Workshop Raising Platform Trolley.
JBS branded, model unknown.
Lifting platform approx 910x500mm.
Platform height adjustable from approx 365mm up to approx 1320mm.
Push handle 970mm high.
Max weight capacity is unknown.
Sold 22/12/2020
Skylarc Ref R121273
Krautkrammer GMBH Digital Thickness Gauge.
Model No. DM2.
Includes case.
Includes attached probe unit DA201, 5 MHz.
Uses 5x AA batteries, not included.
Unit shows external industrial wear and usage.
Sold 20/12/2020
Skylarc Ref G120118
JBS Industrial Workshop Raising Platform Trolley.
JBS branded, model unknown.
Lifting platform approx 910x500mm.
Platform height adjustable from approx 365mm up to approx 1320mm.
Push handle 970mm high.
Max weight capacity 350kg
Sold 20/12/2020
Skylarc Ref R121766
BW GasAlert MicroClip XL Gas Detector.
BW Technology by Honeywell.
Model GasAlert MicroClip XL.
Multi-gas made simple. The slim and compact gasalert microclip xl four-gas (h2s, co, o2 and lel) detector provides affordable protection from atmospheric hazards. With continuous visual confirmation of detector operation and compliance provided by the intelliflash feature. Simple one-button operation for the ultimate ease of use.
Covers detection of four gases (o2, co, h2s, ch4)
Diffusion model
Rechargeable battery, up to 18 hours run time.
Sold 21/12/2020
Skylarc Ref P120907
Steel Workbench with 8" Grinder and Cut Off Saw.
Tolsen FX Force Express 79538 Cut off Saw Single Phase.
Rated voltage: 220-240V.
Frequency: 50/60Hz.
Input power: 2500W.
No load speed: 0-3700rpm.
Cutting capacity: Ø110mm@90°, Ø90mm@45°.
Blade size: 355mm.
Bore size: 25.4mm.
GMF 8" Heavy Duty Grinder Singke Phase.
Sold 20/12/2020
Skylarc Ref Y121903
3M Dustmaster Air Purifying Respirator.
Includes:
1 x 3M Belt Mounted Powered Air Purifying Respirator.
1 x Respirator Charger.
1 x 3M Versaflo Visor S-333LG .
2 x Respirator Tubing
1 x Airflow Indicator.
1 x New Filter.
1 x Manual.
Includes carrying case.
Sold 22/12/2020
Skylarc Ref N121659
Large demag gantry crane crab trolley
8000 kg capacity
Distance inside of wheel rims 1770mm
Approx 55mm wide wheel track
Unknown reach but estimated 8 metres
7.1 kw three phase motor
Straight out of work
Sold 20/12/2020
Skylarc Ref T119897
Vintage Wood Workshop Workbench w/ Vice.
Includes Vono No. 10 1/2 WS vice.
Top surface has 100mm thick, 269mm wide front and a lowered 35mm thick, 500mm wide back surface, see photos.
Includes attached back panel that is approx 3000mm long, 1240mm high.
Single front drawer.
Note - Auction includes workbench and vice only, all other items seen on, in and around unit are NOT Included.
Skylarc Ref O120126
Industrial Heavy Duty Pallet Racking Components.
Includes the following components:
- 3x 3050mm high, 840mm wide Galvanised vertical frames.
- 12x 2730x90x50mm orange horizontal beams.
- Assorted sizes of MDF and plywood Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 22/12/2020
Skylarc Ref X120369
Hydraulic Pipe Bending Machine.
Model TQ2047.
Max pressure: 45Mpa.
Cramp range: 21.3 - 60mm.
Max stroke: 250mm.
Wall thickness of pipe: 2.75 - 4.5mm.
Includes pins and 3 pipe bend sizes:
2", 1½" and ½".
Sold 20/12/2020
Skylarc Ref W120368
Jasic Inverter 180A Tig Welder on Trolly.
10A - 180A (160Amp Optimal) Output.
DC Inverter Welder.
Includes Tig Torch, Ground clamp and
10Amp, 250V 50hz Single Phase.
Comes with elctrodes, welding wire, welding apron and welding mask. Also has single phase double adapter attached to trolly.
Sold 22/12/2020
Skylarc Ref Q121765
BW GasAlert MicroClip XL Gas Detector.
BW Technology by Honeywell.
Model GasAlert MicroClip XL.
Multi-gas made simple. The slim and compact GasAlert MicroClip xl four-gas (h2s, co, o2 and lel) detector provides affordable protection from atmospheric hazards. With continuous visual confirmation of detector operation and compliance provided by the intelliflash feature. Simple one-button operation for the ultimate ease of use.
Covers detection of four gases (o2, co, h2s, ch4)
Diffusion model
Rechargeable battery, up to 18 hours run time.
Sold 22/12/2020
Skylarc Ref F121495
Outside Micrometer Set 0-150mm by Insize.
Set Code No. 3203-1506A.
Includes 6x Micrometers with ranges from 0mm to 150mm.
Includes Assorted accessories.
Includes plastic hard case.
Condition - Items within case appear near new with most showing no visible signs of usage. Case interior as new. Case exterior shows some dust, scratches and marks from workshop storage.
Sold 22/12/2020
Skylarc Ref M121138
Stack of 6 Heavy Duty Industrial Steel Plate Pallets.
25mm thick steel plate.
Condition - moderate surface rust, some of the plates are slightly bent.
Individual dimensions ~ 2200mm x 1000mm x 140mm.
Sold 21/12/2020
Skylarc Ref X121824
Milwaukee 18V Cordless Drill Driver w/ Battery, Charger, Bit Set.
Drill Model No. M18 FPD2.
Includes M18 Red Lithium 5.0Ah battery.
Includes battery charger model M12-18C.
Includes drill extension handle.
Includes Milwaukee Shockwave Drill Bit Set.
Note - There is NO case included with this drill.
Condition - Drill and charger show common trades usage marks. Drill Bit Set is missing a few units. Battery shows heavy external wear and usage, appears to not be the original battery for drill.
Sold 20/12/2020
Skylarc Ref F120117
Industrial Warehouse 1.3m Mobile Platform Ladder.
Manufactured by REX Industrial Equipment.
Top platform 1.3m above floor.
150kg max platform weight capacity.
Top platform demensions approx 700x590mm.
Top safety rails on three sides, open on ladder side with safety chain atrached to prevent falls.
Mounted on Castors.
Brakes to lock in place.
Sold 20/12/2020
Skylarc Ref C120738
Steel shelving made from capital style pallet racking
Two levels, 530mm tall and 990mm tall
Each section 1460mm long
Shelf width 460mm
Combination of rack type steel insert shelves, timber shelves and MDF Sheets
Will be dismantled for collection
Sold 22/12/2020
Skylarc Ref V121848
Assorted Lot of Industrial Bearings & More.
Brand include FAG, SKF, Timken, IKO.
Most items are various sizes of bearings. A few are similar related items.
Estimate of approx 80+ individual items in auction.
Condition - Leftover unused workshop supply stock. Boxes show varying levels of storage grime and dust.
Sold 22/12/2020
Skylarc Ref T120859
Stahl SC02 250kg Electric Chain Hoist.
Made in Germany.
Type No. SC0202-8/2 1/1.
Manufactured 8/2014.
250kg capacity.
Chain type 4x11T.
Chain length unknown.
Power Cabling and pendant control unit attachment are NOT Included.
Sold 21/12/2020
Skylarc Ref I121809
Large Lot of Assorted Workshop Brooms, Shovels, Rakes.
3x Large steel drums filled with an assortment of Workshop items including approx 30+ various Shovels, approx 15+ Assorted Brooms, 2x rakes and 1x sledge hammer.
Condition varies greatly with each unit. Show show light wear and others show heavy wear.
Auction includes the steel drums as well.
Sold 22/12/2020
Skylarc Ref U120080
Large Workbench with Woodworking Vice.
Includes: Woodworking Vice: 300mm x 320mm.
Wooden foot platform: 2400mm x 600mm.
One drawer.
Table top height: 1000mm.
Backrest Dimensions: 3340mm.
Condition - Moderate ware.
Sold 22/12/2020
Skylarc Ref E121494
MX MeasureMax 1000mm Digital Vernier Caliper w/ Case.
Model No. 31-1885.
Includes aluminium hard case.
Condition - Caliper unit appears near new showing few visible minor signs of use. Case exterior shows Workshop wear, some denting, scratches etc. Two latches on case are damaged.
Sold 20/12/2020
Skylarc Ref S119896
Avery 500kg Analog Industrial Platform Scale.
Made in England by Avery.
500kg capacity.
Type No. 32005ABA.
Number S-520979.
Weighing platform approx 790x710mm and 235mm above floor.
Calibration good till 24/2/21.
Sold 20/12/2020
Skylarc Ref O121114
Heavy Steel Industrial Material Bin.
Steel plate construction.
Inner bin depth approx 600mm.
Forkliftable base as well as lifting eyes for top lifting.
Condition - Shows heavy wear, rusting and denting from use.
Sold 20/12/2020
Skylarc Ref R121299
Vintage Antique Cast Steel "Litter" Bin Plant Pot.
Cast Steel, or iron, construction.
Very heavy! Estimate approx 300kg at least.
Age of item is unknown. Located within the old Hillside rail yards so potentially a remnant from the heyday of locomotive and carriage construction?
The word "Litter" is moulded into the side so apparently was originally used as a rubbish bin. Currently being used as a large planter that will never blow away in the wind!
Please note that buyer will need an appropriate vehicle or trailer to handle the weight of this item.
See our other listings for two other matching units.
Sold 21/12/2020
Skylarc Ref R120961
Industrial 3 Phase Mixer.
Unknown brand, markings suggest Fedex, but could not find manufacturers plate.
Approximate Mixer Capactiy: 300L (1050mm x 550mm x 550mm).
Also includes mobile mix container trolly - siting on 4 caster.
Sold 22/12/2020
Skylarc Ref T120131
Vintage Workshop Press.
Made in Edinburgh Scotland by D&J Greig Engineers.
Press plate approx 685x470mm.
Bottom stationary plate approx 780mm above floor.
Top plate adjustable from 0mm up to approx 430mm.
Age of unit is unknown.
Has been used in woodworking Workshop.
Sold 22/12/2020
Skylarc Ref G120586
Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 2x 2440mm high, 610mm wide blue vertical frames.
- 8x 2440x90x50mm orange horizontal beams.
- 4x 2440x570x20mm MDF Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 20/12/2020
Skylarc Ref U121821
Milwaukee Fuel 18V Cordless 1/2" Impact Wrench w/ Battery.
Model No. M18 FIWP12.
Includes M18 Red Li-Ion 4.0Ah battery.
Auction includes Wrench and battery only, no charger included.
Battery is charged.
Age of items unknown.
Sold 20/12/2020
Skylarc Ref I120432
Heavy Duty 4-Wheel Workshop Flatbed Trolley Cart.
400mm diameter tyres.
20mm thick plywood bed surface approx 1215x755mm and 560mm above floor.
Pull handle to front.
Ideal for use on rough or outdoor surfaces.
Sold 22/12/2020
Skylarc Ref K121630
Heavy Duty Industrial Workbench.
10mm thick steel top.
Irwin branded vice: opens to: 170mm. Vice grip width: 125mm.
Under table storage.
2 single phase plug ports.
Small storage shelf built into back wall.
Sold 20/12/2020
Skylarc Ref Z121800
Vintage Wooden Plan or Artwork Drawer Unit.
Appears to be made up from two different units as drawers do not fit into the cabinet fully as they are deeper length and narrower width than the cabinet slots, see photos. Drawers appear to be older than cabinet. Most drawer handles are copper with some as wood replacements.
Age of components unknown.
Old plans seen in drawers are not included.
Would make a good restoration project.
Sold 20/12/2020
Skylarc Ref H120925
Carbatec DC 1200P-A Dust Collector.
Single Phase, 230V, 50Hz,7.7A, 1.5kW, 1200CFM.
Two - 4" (100mm) dust ports allow multiple machines to be connected at the same time.
The inbuilt castors allow the machine to be moved easily.
5 Micron filter bag will filter most dust.
Collection Bag Type: Plastic.
Drum Diameter: 480mm.
Filter Bag Fitted: Needle felt 5 Micron.
Number Of Inlets: 2 x 100mm.
Sold 22/12/2020
Skylarc Ref T121820
Milwaukee 18V Cordless Jig Saw w/ Battery.
Model No. HD 18JS
Includes 18V Red Li-Ion 5.0Ah battery.
Saw and battery in auction only, no charger included.
Battery is charged.
Age of items is unknown.
Sold 22/12/2020
Skylarc Ref M120904
Pallet Racking (3 Bays).
Adjustable pallet racking.
3 bays worth (4 x Uprights, 12 x Cross Beams).
Assembled Dimensions:
L8580mm x W840mm x H1835mm
Racking will be decommissioned and put on a pallet for pickup.
Note does NOT include items in, on or around pallet racking.
Sold 21/12/2020
Skylarc Ref W121512
Long Heavy Steel Workshop Welding Bay Workbench.
Long unit separated into two work bays.
Work surface approx 810mm above floor.
Work surfce depth to back wall approx 590mm.
Steel back wall with narrow shelf approx 1140mm high.
Side walls Welded to both ends and one in the middle.
2x bench Vices, one in each bay.
1x swing out custom built vice, see photos.
Single phase power outlets attached under both work bays.
Note - Workbench is a heavy and long unit, buyer will need appropriate vehicle or trailer to remove.
Item was used for industrial grinding and welding, heavy wear and dust to surfaces.
Sold 22/12/2020
Skylarc Ref P121193
Model: Granowski Impellor-Blast
Large steel shot treatment machine
2 platforms
Machine will need significant disassembly for removal, there are underground augers and conveyors that will need removal
Sold 22/12/2020
Skylarc Ref R120441
Olympus Metallurgical Microscope Set.
Made in Japan by Olympus.
Model unknown, age unknown.
Serial No. 211288.
45 Degree inclined monocular rotating head.
Eye pieces = P7x, P10x and P15x
Objectives = M6, M10, M40, M100.
Includes power transformer unit.
User manual.
Wood case approx 265x295x455mm.
Assorted other accessories included, see photos.
Condition - Microscope shows minor usage marks, very small rust spotting on objectives and objective mount, see photos. Some scratching and wear on wood case exterior.
Sold 20/12/2020
Skylarc Ref U120860
Stahl SC02 250kg Electric Chain Hoist.
Made in Germany.
Type No. SC0202-8/2 1/1.
Manufactured 11/2014.
250kg capacity.
Chain type 4x11T.
Chain length unknown.
Pendant control unit is NOT Included.
Sold 22/12/2020
Skylarc Ref G121807
Roll of 610mm Diameter 170 grit Sanding Paper by Kingspor.
Made in Germany.
Type No. PS23 F.
610mm wide roll.
Condition - Leftover unused partial roll, length remaining is unknown. Roll diameter is approx 215mm.
Sold 22/12/2020
Skylarc Ref Q120700
Heavy Steel Industrial Materials Bin.
Heavy steel construction.
One end has angled side to assist with dumping of contents.
Note - Items seen inside and around bin are NOT Included.
Condition - Appears to be an old unit. Some stress cracks in areas. Very rusty.
Sold 20/12/2020
Skylarc Ref H121029
Epson Digital Projector.
Model No. EB-S140
Lamp hours = 104
HDMI, USB, D-Sub inputs.
Includes power cable, remote, D-Sub cable.
See the Epson Web link below for further item details:
https://www.epson.co.nz/products/projector/EB-S140.asp
Sold 20/12/2020
Skylarc Ref B120191
Master Heaters BLP30 Propane/LP Forced Air Heater.
Blp30 Heaters Heat Up To 700 Sq. Ft
Minimum Take Size 20lb
Blp30 Master Heaters Were Manufactured By Desa Prior To 2009.
See photos for more specifications.
Sold 21/12/2020
Skylarc Ref S121819
Milwaukee 18V 125mm Cordless Angle Grinder w/ Battery.
Model No. HD18 AG125.
Includes M18 4.0Ah Li-Ion battery.
Grinder and battery only, no charger included.
Tool and battery show industrial usage and wear. Battery is charged. Age of items is unknown.
Sold 20/12/2020
Skylarc Ref F120585
650mm Diameter Industrial Grade Workshop Pedestal Fan.
Ebony branded.
Model No. DF650-T(26").
210W.
650mm Diameter blade, 700mm diameter Safety cage.
Weighted base with adjustable height column.
Condition - Heavy Duty unit shows typical industrial wear and dust. Runs normally.
Sold 22/12/2020
Skylarc Ref E120116
Industrial Warehouse 2.6m Mobile Platform Ladder.
Unknown manufacturer.
Top platform 2.6m above floor.
150kg max platform weight capacity.
Top platform demensions approx 1080x800mm.
Top safety rails on right and rear sides, open on front and left side.
Mounted on Castors.
Brakes to lock in place.
Sold 22/12/2020
Skylarc Ref F120559
Avery 500kg Analog Industrial Platform Scale.
Made in England.
Type No. 3205ABA.
500kg max capacity.
Platform is approx 790x700mm.and 230mm above floor.
Condition - Very dusty from industrial Foundary usage.
Sold 20/12/2020
Skylarc Ref W121745
Fluke 714 Thermocouple Calibrator.
Simulate Tc Output.
Operable With Nine Types Of Thermocouples.
Calibrate Linear Tc Transmitter With MV Source Function.
Selectable °f Or °c.
Thermocouple Mini-jack Termination.
Sold 22/12/2020
Skylarc Ref S121716
Telecrane F24-60 Transmitter and Receiver.
Durable nylon-fiber housing for extra shock resistance.
Fully programmable relay configuration with a maximum of 16 relays output per command.
Operating range up to 100 meters
3 stages LED battery power indicator.
Feature acceleration/deceleration delay time control (smooth moving for multiple speed cranes)
Operating Temp. -35°C ~ +80°C
Maximum Range 100 M
Sold 20/12/2020
Skylarc Ref N120905
CMG Three Phase Motor with Right Angle Gearbox.
CMG Three phase asynchronous motor.
220-240/380-415/440-480V, 50/60Hz, 0.37-0.43kW, 1370-1645RPM, 1.11-1.92A.
Attachments: Varela SXA08063Q924 & Varela SRT08528G635.
Sold 21/12/2020
Skylarc Ref N120723
650mm Diameter Industrial Grade Workshop Pedestal Fan.
Ebony branded.
Model No. DF650-T(26").
210W.
650mm Diameter blade, 700mm diameter Safety cage.
Weighted base with adjustable height column.
Condition - Heavy Duty unit shows typical industrial wear and dust. Speed knob is missing. Runs normally.
Sold 22/12/2020
Skylarc Ref X121279
Office Tambour Door Storage Cabinet by Precision.
Steel construction with a light green finish.
Plastic tambour style doors.
Lockable, key included.
Note - Items seen within and around cabinet are NOT Included.
Sold 22/12/2020
Skylarc Ref T121717
Telecrane F25-10D Transmitter and Receiver.
Microprocessor controlled PLL synthesizer (160 Channels).
FCC Part 15 (50mV/meter field strength).
Durable casing with extra shock resistance (IP65).
Temperature Range: Range:-49°F to 185°F (-40°C to +85°C).
Please see photos for more specifications.
Please note photos are indicative.
Sold 21/12/2020
Skylarc Ref V120341
PostAlloy High Performance Hard Facing Welding Wire.
Postalloy 2898-spl.
General purpose abrasion resistant overlay.
Hardness: 55 - 59 Rc Deposit Thickness: 2-3 layers
Deposits are non-machinable.
Sold 21/12/2020
Skylarc Ref I120874
3x Workshop Welding Screens.
Transparent red plastic screens, see photo of ID label for further type details.
Screens Wilson branded.
Steel frames approx 1900mm long, 600mm wide at base feet, and 1860mm high.
Auction is for the three welding screens only, all other items seen in photos are not included.
Sold 21/12/2020
Skylarc Ref Q121714
Telecrane F24-60 Transmitter and Receiver.
Durable nylon-fiber housing for extra shock resistance.
Fully programmable relay configuration with a maximum of 16 relays output per command.
Operating range up to 100 meters
Pre-wiring standard cable making installation quick and easy.
Economic efficiency, ease of operation.
3 stages LED battery power indicator.
Feature acceleration/deceleration delay time control (smooth moving for multiple speed cranes)
Maximum Range 100 M
Skylarc Ref K120668
250KG Drum of Barinoc 75 Foundry Inoculant.
Size: 2-6mm.
Fade resistant inoculant
Used in grey and ductile iron
Very effective in low S grey iron
Changes slag formation in ductile iron
Effective inoculant for alloyed irons such as Ni-resist
Especially effective as a preconditioner or as first step inoculation in a two-stage inoculation process
Sold 20/12/2020
Skylarc Ref A121256
Vintage Metallurgical Microscope by Union Optical.
Made in Japan.
No. 32840
Eye pieces = P5x, P10x, Ke15x, Unitron Polacon, Henzoldt Wetzlar 8x.
Objectives = M40x, Union 31933, Union 53175, Union 53587.
Wood case of Assorted spare parts and accessories.
Wood Microscope box approx 235x210x375mm.
Condition - Age of unit is unknown. Shows dust and some rust spotting from long term storage. Wood box shows wear and dust from storage. Electrical light wires are loose and need re-soldering.
Sold 22/12/2020
Skylarc Ref E120584
650mm Diameter Industrial Grade Workshop Pedestal Fan.
ACPro branded.
Model No. DF650-T(26").
210W.
650mm Diameter blade, 700mm diameter Safety cage.
Weighted base with adjustable height column.
Condition - Heavy Duty unit shows typical industrial wear and dust. Runs normally.
Sold 20/12/2020
Skylarc Ref Z120917
Industrial Racking (1 Bay/3 Shelves).
Steel frame construction.
3 pairs of cross beams (2 Shelves). Wire mesh shelving on bottom.
Height adjustable cross beams.
Will be decommissioned and palletized before pickup date.
Sold 22/12/2020
Skylarc Ref K121292
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function (Bolt holding swivel arm to motor is missing nd wool need replacing).
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 21/12/2020
Skylarc Ref O121296
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function.
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 20/12/2020
Skylarc Ref U121276
7x Assorted Potted Plants.
Each plant a different species.
Plant species are all unknown to us, see photos for details on species included.
Plant heights range from approx 250mm up to approx 1400mm.
Each plant in assorted styles of ceramic pots ranging from 170mm to 400mm diameter and up to 300mm tall.
Plants are leftover Office decor plants. In need of a new home and some TLC.
Sold 22/12/2020
Skylarc Ref J121109
Heavy Steel Industrial Material Bin.
Steel plate construction.
Inner bin depth approx 300mm.
Forkliftable base as well as D-Shackles for top lifting.
Condition - Shows heavy wear, rusting and denting from use.
Sold 20/12/2020
Skylarc Ref V120471
3400kg Double Leg Lifting Chain Set.
Single leg capacity 2000kg.
8mm chain each approx 2100mm in length.
Chain shortening hooks attached.
No lifting hooks included on chain ends.
Master link approx 170x120mm by 20mm Diameter.
Certification tag attached.
Sold 21/12/2020
Skylarc Ref U120444
2-Leg 3400kg Capacity Lifting Chain Set.
Single leg capacity 2000kg.
7.1mm chain each approx 1400mm long.
Master link approx 210x140mm
Includes chain reducer hooks.
Certification tag attached.
Sold 22/12/2020
Skylarc Ref W120862
3x Adjustable Workshop Material Support Roller Stands.
Includes:
- 2x stands each with 300mm long, 40mm diameter rollers, height adjustable from approx 460mm to approx 740mm
- 1x stand with 400mm long, 60mm diameter roller, height adjustable from approx 500mm to approx 690mm.
Sold 22/12/2020
Skylarc Ref K120902
Pallet of 8 Assorted Electric Motors.
1 x CMG 3 Phase Asynchronous Motor. HGA 160M.
480V, 50/60Hz, 12.7kW, 1765RPM, 20.7A.
1 x WEG EFF E2. 450V, 50/60Hz, 1.8kW, 1740RPM, 3.43A.
1 x Teco 3 Phase Induction Motor. 5.5kW, 1450RPM, 300/415V, 11.6/10.7A, 50Hz.
1 x SEC D80 NoR3. 0.75kW, 3 Phase, 410V, 50Hz, 1400RPM.
2 x Brook Crompton D71A6. 0.18kW, 880RPM, 3 Phase, 200-250V 1.47A, 50Hz.
1 x WEG MOT TE80. 3 Phase, 0.55kW, 50Hz, 1420RPM, 240/415V, 2.53/1.47A.
1 x Crompton D80A. 0.55kW, 1400RPM, 400V, 3 Phase , 50Hz, 1.6A.
Sold 21/12/2020
Skylarc Ref X121253
Assorted Grinding Spindles, Disks, Ball Nose Cylinders.
Includes:
- 16x Dronco 125mm diameter, 6mm thick Grinding disks.
32x 8mm diameter ball end cylinders, 5mm diameter shanks.
- 55+ 23x50mm Grinding Spindles, Grade RBW30 P5 V.
- 1x Kinik 75mm diameter, 10mm thick Grinding Wheel.
Condition - The Grinding Spindles, Grinding disks appear as new, unused. Many of the small ball end Grinding cylinders show wear to shanks indicating varying levels of usage, some may be also unused.
Sold 20/12/2020
Skylarc Ref Z121619
60+ Industrial Bolt Down Plastic Safety Pylons.
Orange plastic plyons with reflective bars.
Each is approx 910mm tall, 95mm diameter.
200mm diameter bolt down bases.
Condition - Varies with each unit. Sun fading, some bent or cracked, wear from industrial usage.
Sold 21/12/2020
Skylarc Ref I120900
Reel of 3 Phase Electrical Cable.
450/750V, 3x2.2.5MM2 CU +E2.5MM2.
V99 INS L/UP, 4V90 SHD.
Standard: AS/NZS 5000.2.
Core: Red-White-Blue-Green.
Unknown Length, markings indicate 182M.
Please see spool. dimensions below to make estimates.
Internal spool diameter: 215mm.
Spool Height: 450mm.
Cable Diameter: 11mm.
Sold 20/12/2020
Skylarc Ref J120693
Antique Vintage Wooden Bench.
Unknown wood type, see photos.
Seat height approx 435mm.
Seat depth aporox 290mm.
Item is located in a section of the Hillside Workshops so possibly could be a leftover from the NRZ heyday of railroad locomotive and carriage construction?
Condition - Appears to have been cut off on left side, see photos. Top back board has been cut on right side. Age cracks, wear to wood. Would make a great restoration project.
Sold 20/12/2020
Skylarc Ref H121419
5 Drawer Schematic Planner Cabinet.
Steel frame construction.
5 drawers.
Contents not included.
Please note photos are indicative and this lot could have slight variations in looks. (See final photo of all 6 lots we have listed) this listing is strictly for ONE unit.
Sold 22/12/2020
Skylarc Ref X120499
Allen-Bradley PowerFlex 40
Allen-Bradley 22B-D012N104 Drive, 480VAC, 3-Phase, 5.5kW, 7.5HP, 12A.
Drive, 480VAC, 3-Phase, 5.5kW, 7.5HP, 12A.
Drive, Variable Frequency, PowerFlex 40, 480 Volt AC, 3 Phase, 12 Amp, 5.5 Kilowatt, 7.5 Horse Power, No Filter.
Sold 22/12/2020
Skylarc Ref R120155
26x Assorted More Taper Drill Bits, Reamers + Standard Jobber Drills.
Includes:
- 3x #3 size Taper bits, two Reamers and one drill.
- 9x #2 size Taper Drill Bits and Reamer.
- 14x #1 size Taper Drill Bits and Reamers.
Assorted sizes in Metric and Imperial.
Also includes 11x 5mm Dormer branded Jobber Drill Bits.
Condition varies greatly with each unit.
Sold 20/12/2020
Skylarc Ref M121502
Heavy Duty Wooden Workbench w/ Vice.
Thick wood support frame.
Varying level top surface, see photos. Most of work surface is approx 940mm above floor.
220mm high backside wall.
Lower shelf.
One drawer underneath.
Includes attached Record No. 53E vice.
Workbench shows typical workshop wear and usage.
Age of unit unknown.
Sold 20/12/2020
Skylarc Ref V120497
Xpelair GX9 Extractor Fan.
GX9 Range.
High Performance Extractor Fan.
For use in homes, restaurants, offices, factories, schools and shops.
Ref: 89995AE 230mm Axial Extract Fan.
With Integral Pull-Cord with Universal Mounting Kit and Wall Grille.
Supply: 220-240Vac 1-Phase 50/60Hz Extract Performance: 153 lbs (549m/h).
Sold 22/12/2020
Skylarc Ref T121119
Heavy Steel Industrial Material Bin.
Steel plate construction.
Inner bin depth approx 350mm.
Forkliftable base as well as steel bar loops for top lifting.
Condition - Shows heavy wear, rusting and denting from use.
Sold 22/12/2020
Skylarc Ref D121415
5 Drawer Schematic Planner Cabinet.
Steel frame construction.
5 drawers.
Contents not included.
Please note photos are indicative and this lot could have slight variations in looks. (See final photo of all 6 lots we have listed) this listing is strictly for ONE unit.
Sold 20/12/2020
Skylarc Ref L121397
Precision Engineering 1000mm Straight Edge Ruler w/ Case.
Insize branded.
Model Code No. 7111-1000A.
Includes wood case.
Condition - steel ruler appears excellent with few signs of use. Wood case exterior shows scratches and wear from storage.
Sold 22/12/2020
Skylarc Ref J119887
Workshop Wooden Workbench w/ Vintage Wood Vice.
Approx 73mm thick top wood surface.
More recent modifications done to sides, see photos.
One side drawer.
Includes attached vintage Record branded No. 52 1/2 Vice with 235mm wide Jaws.
Leg extensions have been added.
Note - Auction is for Workbench and vice only, all other items seen on and around unit are NOT Included.
Age of unit is unknown.
Sold 20/12/2020
Skylarc Ref Z120735
Industrial Steel Workbench With Vice.
Steel frame construction.
Steel backrest.
Attached air compressor timer.
Record 150mm No6 Vice, Opens to 155mm, still operates but could use a service.
Includes air hose timer.
Sold 22/12/2020
Skylarc Ref F121625
Vintage Antique Heavy Steel Workshop Pallet Rack of Railroad Rails.
Heavy workshop pallet rack constructed of antique steel railroad rails.
Rails approx 115mm wide and 115mm high.
Custom made rack is welded together so cannot be dissasembled.
One rail is marked with "R 70 BS 1909", possibly indicating a 1909 rail construction date? See photo.
Items seen on and around rack are NOT Included.
Very heavy unit, buyer needs appropriate transport on pickup.
Sold 21/12/2020
Skylarc Ref C121414
5 Drawer Schematic Planner Cabinet.
Steel frame construction.
5 drawers.
Contents not included.
Please note photos are indicative and this lot could have slight variations in looks. (See final photo of all 6 lots we have listed) this listing is strictly for ONE unit.
Sold 22/12/2020
Skylarc Ref M121294
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function (bolt to hold swivel arm to motor is missing and will need replacing).
Wall mount bracket only, no floor stand Included.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 22/12/2020
Skylarc Ref K121500
Precision Large Office Card File Cabinet + 2x Smaller File Units.
Includes:
- Precision 8-drawer Steel file cabinet. Each drawer has interior space of approx 570x385x120mm. Lockable but key is missing. Cabinet is approx 645x500x1310mm.
- Precision 2-dawer steel card file cabinet for approx 155x110mm size file cards, see photos. Cabinet is approx 380x370x170mm.
- Unbranded 2-drawer Steel card file cabinet for small cards. Cabinet approx 390x360x170mm.
Contents of cabinets are NOT Included.
Cabinets dusty, may benefit from a clean.
Sold 21/12/2020
Skylarc Ref H121289
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function.
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 20/12/2020
Skylarc Ref W121823
Milwaukee 18V Cordless Drill Driver w/ Battery, Charger, Case.
Drill Model No. M18 FPD
Includes M18 Red Lithium 5.0Ah battery.
Includes charger model M12-18FC.
Includes drill extension handle.
Includes case.
Condition - Drill shows heavy exterior grime and wear from industrial usage, see photos. Drill does appear to operate normally but not tested at length. Other included items show dust, grime and wear.
Sold 20/12/2020
Skylarc Ref B120581
Mobile Workshop Trolley Shelf Cart.
Steel frame with MDF shelf boards.
Handle at one end, approx 1035mm.
100mm diameter castor wheels.
Condition - Sand and dust on unit. Some wear to MDF.
Sold 22/12/2020
Skylarc Ref F121287
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function.
Wall mount bracket only, no floor stand Included.
Condition - Very dusty, needs a good clean. Dent to side on motor housing. Swivel bar needs reattaching.
Sold 20/12/2020
Skylarc Ref K120720
Heavy Steel Industrial Material Bin.
Stackable design.
See photos for design details.
Unit shows heavy industrial wear and usage.
See our other listings for other compatible material bins.
Sold 21/12/2020
Skylarc Ref E121286
Industrial Workshop Cooling Fan by FWL.
Unsure which model number this unit is, see photos.
700mm diameter fan safety cage.
650mm Diameter fan blades.
Single phase.
Speed control dial on side.
Swivel function.
No floor stand included, ceiling or Wall mount bracket only.
Condition - Unit appears to mainly be just very dusty, a good dusting clean should benefit it greatly. A few dents to housing.
Sold 21/12/2020
Skylarc Ref L121293
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function.
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 22/12/2020
Skylarc Ref I121290
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function (bolt to attach swivel arm to motor is missing).
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 20/12/2020
Skylarc Ref V121381
Office L-Shaped Corner Desk Workstation w/ Mobile Drawer. Laminated MDF construction. Top is Faux Wood laminate top with a dark purple laminate sides and support.
Three drawer mobile unit 470x460655mm included.
Note - Auction is for desk and drawer units only, all other Items seen on and around the desk and drawer are NOT Included.
Sold 20/12/2020
Skylarc Ref I121004
3 x Industrial Steel Stackable Material Storage Bins.
Steel box frame construction.
Stackable design.
Grill construction bases.
Individual dimensions/capacity: 995mm x 945mm x 385mm / approximately 220L capacity.
Sold 20/12/2020
Skylarc Ref P120699
Antique Vintage Wood Office Desk.
Unknown manufacturer and wood type.
Some drawers have antique locks, keys are missing.
Exact age of unit is unknown but rough guess would be first half of 1900's?
As this unit is located within an area of the old Hillside Workshops, it is possible this Desk was used by the NZR during the heyday of railroad locomotive and carriage construction. A great piece of history to own!
Condition - Surfaces show typical scratching, wood chips, wear from age and use. Very sturdy unit. Would make a great restoration project.
Sold 22/12/2020
Skylarc Ref T121742
DBU Sala Rollgliss Rescue Pole 4 Ft - 16
Ft 340081 AG62502005.
Designed for use with the Rollgliss® R250 Rescue Kit, or with a variety of peer rescue kits/systems during pick-off rescue operations. Comes complete with its own carry bag.
Sold 21/12/2020
Skylarc Ref G121288
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function.
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 22/12/2020
Skylarc Ref Z121125
Nescafe Ultra Automatic Coffee Dispenser.
Dispenses cappuccino, Cafe au lait, cafe mocha, chocolate, coffee, hot water, milk, sugar.
Dispenser unit approx 470x390x610mm.
Base cupboard unit approx 570x400x860mm.
Condition - Unit appears to have been inactive for some time. Unknown if operational.
Sold 22/12/2020
Skylarc Ref G121418
5 Drawer Schematic Planner Cabinet.
Steel frame construction.
5 drawers.
Contents not included.
Please note photos are indicative and this lot could have slight variations in looks. (See final photo of all 6 lots we have listed) this listing is strictly for ONE unit.
Sold 21/12/2020
Skylarc Ref W121044
Metabo WP 12-125 Quick Angle Grinder.
Grinding wheel Ø:
125 mm / 5 ".
Rated input power:
1250 W.
No-load speed:
11000 rpm.
Torque:
3.4 Nm / 30 in-lbs.
220-240V, 50/60Hz, 1250W, 5.7A, Single Phase.
Sold 21/12/2020
Skylarc Ref B121257
Avery Berkel 15kg Benchtop Industrial Digital Scale.
Model No. DX342.
15kg max weight capacity.
Digital displays on front and back sides.
Removable stainless Steel weighing tray approx 340x230mm.
Overall scale dimensions are approx 350x360x120mm.
Note - The 9V, 100mA power adapter unit is missing so we are unable to test the unit. Buyer will need to source a replacement power adapter to power the scale.
Exterior condition is very good showing generally mild industrial wear and use marks.
Sold 22/12/2020
Skylarc Ref U120964
Vintage Antique Sturdy Wood Stair Unit.
Approx 38mm thick wood boards, wood type unknown, see photos.
Exact age of unit is unknown. As it's from the Hillside workshops it possibly could be a remnant leftover from the old NZR heyday era of locomotive and carriage construction.
Condition - Shows typical age wear though still very sturdy. Can still be used for multiple purposes or for restoration as possible historical item.
Sold 22/12/2020
Skylarc Ref F121832
4x Assorted Sets of Jobber Drill Bits.
Includes sets from Dormer, Izar, JBS, and Evacut.
All sets are missing some bits, see photos for further details.
All sets are metric.
Sizes ranging from 1mm to 13mm.
Sold 20/12/2020
Skylarc Ref E121234
Lot of Assorted Welding Electrodes W/ Dry Cabinet.
Assorted brands and types of Electrodes with varying quantities of each. See photos.
Includes storage cabinet.
Condition - Electrodes are unused leftover partsol packs. Storage Cabinet shows moderate industrial wear and usage.
Sold 20/12/2020
Skylarc Ref E121416
5 Drawer Schematic Planner Cabinet.
Steel frame construction.
5 drawers.
Contents not included.
Please note photos are indicative and this lot could have slight variations in looks. (See final photo of all 6 lots we have listed) this listing is strictly for ONE unit.
Sold 22/12/2020
Skylarc Ref T120157
Vintage Antique Oak Office Drawer Unit.
Appears to be a type of oak wood, see photos.
Brass drawer handles.
Age of unit unknown.
Condition - Unit still very solid feel to it. Surfaces would benefit from a sanding and refinishing restoration.
Sold 22/12/2020
Skylarc Ref A120580
Mobile Workshop Trolley Shelf Cart.
Steel frame with MDF shelf boards.
Handles at both ends, each approx 1035mm.
100mm diameter castor wheels.
Condition - Sand and dust on unit. Some wear to MDF.
Sold 21/12/2020
Skylarc Ref K120382
Miller Deltaweld 650 CY50 PS & 952E Wire Feeder MIG Welder.
Power Source: Miller Deltaweld 650 Cy50.
Max output: 650Amps,
3 phase 500V, 50Hz input plug.
Wirefeed: Miller 9-52E 115V Constant Speed Wire Feeder.
Comes with Torch and gas line.
Sold 21/12/2020
Skylarc Ref P120725
Ishida 150kg Industrial Digital Platform Scale.
Model No. iGX
150kg max capacity.
Weighing platform 50x400mm.
Adjustable feet.
Scale height approx 850mm.
Includes heavy Duty Steel platform stand approx 550x430x440mm.
Note - Tape measure seen on scale in weight sample photo is not included.
Condition - Scale shows moderate industrial wear and use. Dented stainless steel weight platform.
Calibration due 2/2021.
Sold 21/12/2020
Skylarc Ref X121850
Assorted Lot of Industrial Adhesives, Anti-Seize, Lubricants, Sealants, & More.
Approx 50x Assorted items.
Brands include Locktite, CRC, Ados, Rocol, NTN, Castrol, Simpson, and more.
A wide range of items for industrial usage, see photos for further details on specific items included.
Condition - Varies greatly with each unit. Some as as new unused while most others show varying levels of usage.
Sold 22/12/2020
Skylarc Ref K120148
13x Assorted Vintage Wood Chisels.
Many have "NZR" (New Zealand Rail) etched on them, see photos.
Various manufacturers.
Longest unit is approx 445mm long including handle.
Various cutting types, see photos.
Condition varies with each unit.
Sold 22/12/2020
Skylarc Ref I121602
Industrial Workshop Pedistal Fan by Kinchrome.
Model No. KP1005.
750mm fan blade diameter.
800mm cage diameter.
Adjustable speed.
Swivel function.
Height adjustable floor stand.
Condition - Currently disconnected from its base, needs to be screwed back on. Swivel bar is bent and needs straightening. Unit is very dusty, would benefit from and clean.
Sold 22/12/2020
Skylarc Ref I120588
Medium Weight Dexion Workshop Shelving Unit.
Dexion branded.
Unit is bolted together, buyer can disassemble unit for transport.
Condition - Unit shows moderate wear and use, surface rust etc.
Sold 21/12/2020
Skylarc Ref C120894
NEW Hi.Lo Oxy/Acetylene/LPG 400mm 90° Cutting Torch.
Model: GCTHL450.
HiLo Cutting Torch, 3 Seat OXY/ACET/LPG, 400mm long, 90°.
Comes with GHCTL5 Precision cutting tip, 3 seat #5 OXY/LPG 225-300mm.
As new, taken out of box for photos.
Comes with Manual.
Sold 21/12/2020
Skylarc Ref X120915
Large Industrial Dry Storage Cabinet.
Single phase drying unit.
Steel frame construction.
Lockable latch.
Floor storage and two shelves.
Unit contains large assortment of various molten metal ceramic filters. Approximately 100 +.
Sold 20/12/2020
Skylarc Ref N121295
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function.
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 22/12/2020
Skylarc Ref Z121489
4x Assorted G-Clamps.
Includes:
- Record No. 6 clamp, approx 150mm gap.
- Nuweld clamp, approx 160mm gap.
- Nuweld clamp, approx 100mm gap.
- Nuweld clamp, approx 170mm gap.
Condition - Some bending to threaded bolts as ends don't align with top pad of clamp on two units.
Sold 20/12/2020
Skylarc Ref H121601
Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 2x 1715mm high, 840mm wide Galvanized vertical frames.
- 4x 2730x90x50mm orange horizontal beams.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 21/12/2020
Skylarc Ref C120582
Mobile Industrial Material Hopper Bin.
5mm thick plate steel hopper walls.
140mm Castor wheels.
Bottom drain hole approx 135mm diameter.
Inner hopper dimensions (excluding angled lower section) is approx 907x893x727mm.
Condition - Unit has been used for various foundary sands.
Sold 21/12/2020
Skylarc Ref R120337
Gw Instek GPR-6030D Single Output Linear Dc Power Supply.
LED Display, Low Power Demands, 3 Output Amps, 60 Output Volts, 180 Output Watts.
Suitable for high-end precision bench top applications. Low load and line regulation for both constant voltage and constant current mode ensure reliable, predictable output. Overload and reverse polarity protection as well as internal selection for dynamic or constant load are standard.
Sold 22/12/2020
Skylarc Ref T120235
5 x MT5-MT4 taper adapters
MT5-MT3 taper adapter
MT5-MT2 taper adapter
2 x MT3-MT2 taper adapters
MT3-MT1 taper adapter
15mm machine reamer
Drills, 15.5mm, 9.5mm, 16.5mm, 21.5mm, 16mm, 12.5mm, 10.2mm, 9.8mm
2 x centres
Sold 20/12/2020
Skylarc Ref N120125
Mobile Warehouse Scaffolding Platform.
2x 1650x730mm vertical units each with castors on feet.
2x removable side bars.
Removable standing platform approx 1520x540mm.
Platform currently set to 650mm above floor.
Unit can be Dissasembled by buyer for transport.
Sold 20/12/2020
Skylarc Ref J121291
Industrial Workshop Cooling Fan by FWL
Model No. DFS-65.
650mm Diameter fan blades.
700mm diameter Safety cage.
Speed dial on side.
Swivel function.
Wall mount bracket only, no floor stand Included.
Dimensions listed are generalised.
Condition - Very dusty overall, mainly just needs a good clean.
Sold 20/12/2020
Skylarc Ref R121818
AmPro Professional 148-Piece Power Drill Bit Set.
Set model number unknown.
Set appears complete.
Case measures approx 225x145x45mm.
See photos for details on types of Drill Bits Included in set.
Skylarc Ref S120702
Heavy Steel Industrial Materials Bin.
Heavy steel construction
Lifting Eye holes approx 60mm diameter and spaced approx 950mm apart on centre.
See photos for further bin design details.
Note- Scrap metal seen in bin is NOT included.
Skylarc Ref B120113
Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 2x 2750mm high, 840mm wide blue vertical frames.
- 6x 3350x100x50mm orange or grey horizontal beams.
- Assorted sections of MDF and plywood Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking is NOT included.
Note - Racking will be decommissioned and stacked for buyer pickup.
Sold 20/12/2020
Skylarc Ref H121523
Mitutoyo 200mm Digital Vernier Caliper w/ Case.
Model 500-322.
Includes plastic case.
Condition - Physical condition good showing typical industrial wear and usage. Unable to test unit as batteries are drained and replacements unavailable. Case shows moderate wear.
Sold 20/12/2020
Skylarc Ref L120149
Dial Indicator Gauge w/ Adjustable Magnetic Base.
Includes:
- Hunan branded magnetic Base model J101-201.
- Unknown brand dial indicator with 0mm to 10mm range.
Both units include original boxes.
Sold 22/12/2020
Skylarc Ref N121113
Heavy Steel Industrial Material Bin.
Steel plate construction.
Inner bin depth approx 300mm.
One end angled base for dumping contents.
Forkliftable base as well as D-Shackles for top lifting.
Condition - Shows heavy wear, rusting and denting from use. One D-Shackle is broken.
Sold 21/12/2020
Skylarc Ref J120147
5x Assorted SGS Tools End Mill Bits.
Includes:
- 2x SER 1XLM 12mm 50mm FLT end Mills, type No. 43135.
- 1x SER 14M 10mm Ti-Namite Coat end mill, type No. 48897.
- 1x SER 14M 18mm Ti-Namite Coated end mill, type No. 48897.
- 1x SER 14M 8mm Ti-Namite coated end mill, type No. 48895.
Condition - Items show saw dust residue on end Mills so appear to have been used with wood only.
Sold 20/12/2020
Skylarc Ref E120168
270+ Vintage Antique Pattern Makers Brass Master Dowels, Size 3.
Made in USA by The Kindt-Collins Company.
Patented February 1950.
270+ units all are size No. 3.
Condition - Items appear unused though not all inspected. Two boxes appear to have been unopened and factory closed with copper folding tabs. We opened carefully to inspect contents, see photos. One box was previously opened and is missing a few units. Box shows aging and wear from storage.
See our other listings for more lots of brass dowels.
Sold 20/12/2020
Skylarc Ref U121380
Office Whiteboard.
Resino branded.
3600x1200mm size.
Magnetic backing.
850mm long marker tray.
Includes magnetic eraser.
Condition - Thin black tape lines have been added to surface, would benefit from a surface clean.
Sold 22/12/2020
Skylarc Ref C120868
Black bin of Circlips
Champion Assortments
CA 1760 Circlips - Int. & Ext. - Metric
CA 1416 Socket Set (Grub) Screws B.S.W. & Metric
Assortment No. CA 540 Phillips HD. Self Tapping Screws
Sold 22/12/2020
Skylarc Ref J121836
Assorted Lot of Hand Tools, Sockets, Hole Cutters, Punches & More.
Includes brands Starrett, Teng Tools, Worldwide, Rennsteig, Aigo.
Includes 1/2" Sockets, socket Wrench, Breaker Bar. Includes hole Cutters, two punch sets, Hammer, screwdriver and more. See photos for further details on items included and their condition.
Sold 21/12/2020
Skylarc Ref J120459
Incomplete 4- Leg Lifting Chain Set.
4x Weissalloy chain shortener hooks.
4x Yoke YM10-8-RTA safety hooks.
2x 200x135mm by 25mm diameter secondary master links.
1x 260x180mm x 30mm master link.
Main chains missing.
No certification tag attached to set.
Sold 22/12/2020
Skylarc Ref X120473
3400kg Double Leg Lifting Chain Set.
Single leg capacity 2000mm.
8mm chain each approx 1370mm long.
D-Shackles at ends.
Master link approx 175x120mm by 20mm Diameter.
Certification tag attached.
Sold 22/12/2020
Skylarc Ref A121204
Office L-Shaped Corner Desk w/ Chair & Mobile Drawer.
Dark grey laminate desk surfaces.
Black laminate mobile drawer 470x470x655mm.
Gas lift adjustable desk chair included.
Note - All other items seen on and around desk are NOT included.
Sold 22/12/2020
Skylarc Ref F120429
Reciprocating Air Tool.
Unable to find a readable ID mark on tool so manufacturer and model are unknown.
Tool length excluding hose approx 400mm.
Inner shaft extends outwards approx 80mm.
Hard rubber knob approx 50mm diameter at end.
See photos for further details on type of air tool.
Condition - Shows moderate surface wear, grime from heavy workshop usage.
Sold 22/12/2020
Skylarc Ref P120153
4x Assorted Morse Taper Drill Bits.
Includes:
- 37mm #4 bit
- 1 3/8 #4 bit.
- 32mm #3 bit.
- 24.5mm #3 bit.
Condition varies with each unit. Some have had their tips modified on a Grinder, see photos.
Sold 21/12/2020
Skylarc Ref F121417
5 Drawer Schematic Planner Cabinet.
Steel frame construction.
5 drawers.
Contents not included.
Please note photos are indicative and this lot could have slight variations in looks. (See final photo of all 6 lots we have listed) this listing is strictly for ONE unit.
Sold 22/12/2020
Skylarc Ref V121667
Case of Assorted Small Pipe Fittings.
Tactix branded two sided case with 34 seperate storage compartments.
Large assortment of pipe fittings, sizes ranging from 5mm to 15mm - Please see photos for more details.
Sold 20/12/2020
Skylarc Ref I121835
Center 300 Type K Digital Thermometer.
Includes cable with probe, instruction manual, soft case.
Uses 9V battery (not included).
Unit is untested as no battery available.
Unit and case show few minor signs of use.
Sold 21/12/2020
Skylarc Ref Y120448
3-Leg 8200kg Capacity Lifting Chain Set.
Single leg capacity 3150kg.
10mm chain each approx 2030mm long.
Master link approx 370x215mm.
Includes chain reducer hooks.
Certification tag attached.
Sold 22/12/2020
Skylarc Ref U120158
Neolt Tecnostyl 626 Professional Drafting Table.
Made in Italy.
Table surface approx 1055x750mm.
Height when horizontal approx 750mm.
Adjustable table angle.
Condition - Some tape residue on surface. Mostly just dusty from storage, would benefit from a cleanup. Ruler Assembly moves normally.
Sold 20/12/2020
Skylarc Ref B120893
Assorted Single/Three Phase Plugs/Outlets.
1 x Female 10A, 250V, 50Hz, Single Phase Plug.
1 x Male 10A, 250V, 50Hz, Single Phase Plug.
1 x Female 32A, 500V, 50Hz, Three Phase Plug.
1 x Female 20A, 500V, 50Hz, Three Phase Plug.
1 x Male 32A, 500V, 50Hz, Three Phase Plug.
1 x Male 20A, 500V, 50Hz, Three Phase Plug.
1 x Male 90A, 440V, 50Hz, Three Phase Plug.
1 x 40A, 500V, 50Hz, Three Phase IP66 Outlet with Switch.
Sold 21/12/2020
Skylarc Ref E121727
Set of 6mm number punches
Grease fitting thead tester
Set of Hawera MultiConstruction drill bits
Part set of Dormer drill bits
Wera metric allen keys
2 x SKF hook wrenches
Part set of Bordo easy outs
Sold 20/12/2020
Skylarc Ref R121844
Heavy Steel Industrial Materials Bin.
Approx 200mm high support legs.
D-Shackles in corners for chain Lifting.
Interior space approx 1800x825x300mm.
Condition - Very rusty, dented, cracked steel. Age of unit unknown but appears to be quite old, likely leftover from the Hillside Railroad era.
Sold 20/12/2020
Skylarc Ref A121801
Large Heavy Duty Workbench.
Lower frame is comprised of Heavy Duty Pallet Racking Components, 2x vertical units each 920mm wide, 835mm high and 2x horizontal beams each 2700mm long.
Top surface of 20mm thick wood chip board 3610mm long, 900mm wide.
Back side has an MDF board back wall with shelf, wall aporox 300mm above work surface and shelf approx 190mm wide.
Note - Items seen on and under Workbench are not included.
Unit will need dissembly to remove from its upper level office location.
Sold 21/12/2020
Skylarc Ref L120357
32 taps total
Sizes include
1", M18x1.5, M20, 3/4" UNC, Unknown,
7/8"-9 UNC, 7/8"-9 UNC, 5/8"-11 UNC, 5/8"-11 UNC, 5/8-11 UNC, 3/8" BSP, 3/8", M14, 3/8", 1/2", 1/2' UNC, 1/8" BSF, 1/2" UNC, 7/16" UNC, 1/2 UNC,
Assorted small sizes
Sold 20/12/2020
Skylarc Ref Z121567
Safety Harness Kit.
Adjustable Single Leg Body Harness and Lanyards
1 x Sala branded harness.
1 x QSI 2M Energy Absorbing Lanyard Max weight: 150KG (DOM: 09-2014, DOW: 09-2024).
1 x Protecta 2M energy absorbing lanyard max weight 160kg (DOM: 12-2012, DOW: 12-2022).
1 x QSI 2M Energy Absorbing Lanyard Max weight: 150KG (DOM: 05-2017, DOW: 05-2027).
4 x Prosafe Miller tie off anchorage.
2 x Petzl 22kN
Includes instruction manuals.
Sold 21/12/2020
Skylarc Ref G120482
1500kg Capacity Spreader Bar Lifting Chain Unit w/ Bin Hooks.
Spreader Bar beam approx 800mm long, 120mm wide, 105mm high.
Top hook and two bottom hooks of 25mm diameter steel.
2-Leg Lifting Chain units on each bottom hook, 1500kg Capacity each with 1400mm long 18mm diameter chain atrached.
Steel bin hooks attached to ends, max inner diameter is approx 100mm.
Certification tags attached.
Sold 20/12/2020
Skylarc Ref R120467
3150kg Double Leg Lifting Chain Set.
Both double and single leg are rated at 3150kg, see tag photo.
10mm chain at 1500mm length each.
Two large hooks at ends each with 80mm inner gap.
Master link approx 170x120mm by 20mm Diameter.
Sold 20/12/2020
Skylarc Ref Y121825
Limit 200mm Digital Vernier Caliper w/ Case.
Manufactured by Limit.
Code No. 19014-0202.
Includes case.
Condition - Caliper shows very few minor signs of usage. Case exterior shows more moderate wear, dust etc from workshop storage.
Sold 21/12/2020
Skylarc Ref D121856
Aluminised Kevlar Smock, Size Large, for High Heat Work.
Unknown brand.
Type No. AKS50UL.
Unlined.
Size = Large.
Condition - New unopened in manufacturer bag. Bag exterior is dusty from workshop storage.
Sold 21/12/2020
Skylarc Ref G121106
Heavy Steel Industrial Material Bin.
Steel plate construction.
Inner bin depth approx 310mm.
Forkliftable base as well as D-Shackles for top lifting.
Condition - 2x D-Shackles are missing.
Sold 20/12/2020
Skylarc Ref Q120310
Assortment of Sandvik Coromant Milling Inserts.
9 x Worn TPKN 22 04 PD R TPK 43P2 R 4030.
5 x SEMN 12 04 AZ SEM 43A 235 P45, M35.
5 x R216.2-15 T3 12-2 HM K15.
8 x Corokey 345R-1305M-PM.
8 x R216.2-09.T3 HM K15.
Sold 20/12/2020
Skylarc Ref M120722
Avery 100kg Industrial Platform Dial Scale.
Max capacity of 100kg at 500g increments.
Weighing platform approx 485x345mm and 125mm high.
Calibration due 2/2021.
Condition - Crack in base, see photos. Shows industrial wear and usage.
Sold 21/12/2020
Skylarc Ref H120587
Heavy Steel Workshop Storage Shelf.
Heavy steel frame with approx 4mm thick steel plate shelf surfaces.
Unit is Welded together, cannot be dissasembled.
Note - Items seen on and around shelf are NOT Included.
Sold 20/12/2020
Skylarc Ref O121244
Atlas Copco 125mm Air Turbine Angle Grinder.
Unable to read ID plate, see photos, so unable to verify model number though the tool does visually appear to be similar to the GTG25 model listed on the Atlas Copco website.
125mm diameter Disk guard.
12000rpm.
Includes Hex Key Wrench.
Includes a length of compatible air hose.
No side handle included.
Sold 21/12/2020
Skylarc Ref S121118
Heavy Steel Industrial Material Bin.
5mm steel plate construction.
Inner bin depth approx 380mm.
Forkliftable base as well as D-Shackles for top lifting.
Condition - Shows heavy wear, rusting and denting from use.
Sold 20/12/2020
Skylarc Ref U121120
Heavy Steel Industrial Material Bin.
Steel plate construction.
Inner bin depth approx 300mm.
Forkliftable base as well as lifting eyes for top lifting.
Condition - Shows heavy wear, rusting and denting from use. Lifting eyes are bent in.
Sold 21/12/2020
Skylarc Ref O121608
Nomad Worksite Single Phase Power Centre.
Made in NZ by Wynco.
Model number unknown.
2x 15A and 4x 10A 250V power sockets.
Circuit Breaker built into unit.
Condition - Unit shows moderate industrial wear and usage. Two socket covers are missing and another cover has broken latch so is always open.
Sold 22/12/2020
Skylarc Ref A121827
Famous Toledo Double Lap Flaring Tool w/ Tube Cutter Set.
Part No. 301701.
Set appears complete.
Condition - Items inside case appear near new, may show slight use marks, see photos. Case exterior shows dust and grime from workshop storage.
Sold 21/12/2020
Skylarc Ref J120901
Pallet of 5 Assorted Electric Motors.
1 x Amplidyne CXX4124A 3 Phase/220V/4.6A 1440RPM.
1 x Marathon XL 215TTFL7009RA-R25 3 Phase/208-415V/12.2-24.4A, 2910RPM.
1 x SEW Eurodrive RF6 2UT90L8/2 BM2 - Broken Shaft 540-2750RPM, 400V, 1.6-3.7A, 0.3-1.3kW.
1 x SEW Eurodrive RF6 2UT90L8/2 BM2 - Casing Removed 540-2750RPM, 400V, 1.6-3.7A, 0.3-1.3kW.
1 x Large blue Unknown Make/model, size: 760x550x420mm.
Sold 21/12/2020
Skylarc Ref N121191
Large industrial tumble blasting machine
1260mm x 850mm diameter tumble chamber
Self contained with hopper above and recycling conveyor
Shot sepator for sorting shot from waste
This machine will require extensive decommissioning for transport
Sold 22/12/2020
Skylarc Ref B120269
19 mill cutters
48.5mm 2 flute cutter
1/4" x 15/16" tapered
Tapered end mills 20mm, 20mm, 21mm, 18mm
End mills 1 1/2", 13/16", 30mm, 13/16", 21mm, 20mm, 3/4", 3/4", 5/8" 15mm, 7/16", 7mm, 15/16"
Sold 21/12/2020
Skylarc Ref T120183
50+ Assorted Aluminium Foundary Mould Base Plates.
Each plate varies in length from approx 450mm up to 600mm. Widths from approx 300mmto 350mm. Thicknesses average around 10mm to 12mm.
Sold 21/12/2020
Skylarc Ref Y121124
Westinghouse 434L Refrigerator.
Model No. RP432V-R.
Gross capacity 434L.
Condition - Interior is in need of a clean. Some exterior marks, small dents etc. Had been used in a industrial factory lunch room.
Sold 22/12/2020
Skylarc Ref Y121851
AmPro Air / Hydraulic Riveter + bonus Eclipse Hand Riveter.
Includes:
- AmPro 3/16" Air / Hydraulic Riveter model A3706.
- Eclipse Spiralux hand Riveter, Size and model number unknown.
Sold 22/12/2020
Skylarc Ref I120614
Industrial Material Tip Bin.
Steel frame construction.
Fork(lift) guides on bottom.
6 lifting eyes (4 on top, 2 on bottom).
Contents will be emptied before pickup.
Please see dimensions below for idea of capacity.
Sold 20/12/2020
Skylarc Ref I120718
2x Heavy Steel Industrial Material Bins.
Each bin is approx 1110mm long (excluding lifting rings), 910mm wide, 790mm high.
One side has lower side wall, see photos.
Stackable design.
Condition - Both units shows heavy industrial wear and use.
Sold 21/12/2020
Skylarc Ref Z121385
Vintage Office Wooden A4 Storage Rack Shelf Unit.
Removable Shelving boards.
Holds up to A4 size sheets.
Some boards are cut shorter for smaller sheets.
Wood construction with a dark stain finish.
Age of unit is unknown.
Items seen on and around unit are not included.
Sold 20/12/2020
Skylarc Ref U120314
Assorted End Mills (9 Units).
1 x Conical HSS 2° B206 3 Shank.
1 x Somtia HSS Co8e 8mm 18/05 ballnose.
1 x Somtia HSS Co8e 6mm 23/06 ballnose.
1 x Somtia HSS Co8e 6mm 14/07 flatnose.
1 x Trade Tools 8mm series 14m D/E stub carbide endmill 12x63.
1 x Somtia HSS Co8e 10mm A6 ballnose.
1 x Somtia HSS Co8e 3/16" 32/10 short shank end mill.
1 x Sutton CoHss 3/16" short shank end mill.
1 x Clarkson HSS 3mm short shank.
Sold 22/12/2020
Skylarc Ref Q120440
Heavy Duty Workshop Elevated Platform Unit.
Heavy steel frame in yellow. 10mm thick steel wire Elevated Floor approx 630mm above ground. Floor area approx 830x830mm.
See photos for further design details.
Heavy steel pipe railing riding approx 880mm above steel wire floor.
Sold 20/12/2020
Skylarc Ref B121621
UWE 6000g Industrial Digital Scale.
Model No. AXM6000
6000g max capacity.
Stainless Steel top plate 250x220mm.
Includes power adapter cord.
Condition - Shows moderate external wear from industrial usage. Most feet are missing. Some cracks in plastic body. Computer attachment port is damaged, see photo.
Note - Tape measure seen on scale is for weight sample display only and is NOT included.
Sold 21/12/2020
Skylarc Ref Y121254
Panasonic HD Digital Camcorder. Model No. HC-V10.
Uses SD cards to record (not included).
Includes USB cable and Audio cable.
Includes Panasonic battery pack VW-VBL090.
Includes LowePro branded case.
Condition - Camera shows very few minor signs of use. The one battery is in need of a charge. No external battery charger included.
Sold 20/12/2020
Skylarc Ref E120480
1500kg Capacity Lifting Jaw Unit.
Minimum inner jaw width when fully closed is approx 45mm.
Max opening while lifting is approx 110mm, see photo.
Master link ring approx 135mm diameter.
Certification tag attached.
Sold 22/12/2020
Skylarc Ref I121030
14x Vintage Retro Stacking Chairs.
Steel tube frames with wood seats and backs.
Stackable design.
Seat height 455mm.
Seat width 350mm.
Back height 780mm.
Nine units in cream colour seat and back, five units in a dark green colour.
Manufacturer and exact age of units are unknown.
Finishes show wear from age and use. Would make a great restoration project or use as is.
Sold 22/12/2020
Skylarc Ref H121107
Heavy Steel Industrial Material Bin.
Steel plate construction.
Inner bin depth approx 300mm.
One end angled base for dumping contents.
Forkliftable base as well as D-Shackles for top lifting.
Condition - Shows heavy wear, rusting and denting from use.
Sold 21/12/2020
Skylarc Ref N120463
5350kg Incomplete Double Leg Lifting Chain Set.
3150kg single leg capacity.
10mm chain at 1000mm length.
240x146mm by 25mm diameter master link.
No hooks at end of chain included.
Sold 21/12/2020
Skylarc Ref O120464
5350kg Incomplete Double Leg Lifting Chain Set.
3150kg single leg capacity.
10mm chain at 1000mm length.
240x146mm by 25mm diameter master link.
No hooks at end of chain included.
Sold 22/12/2020
Skylarc Ref Y120474
2x Sets of 2000kg Lifting Chain Sets.
2000kg capacity each.
10mm chain each approx 530mm leng.
4x connection links each approx 95x65mm.
2x small D-Shackles Included.
Certification tags attached.
Sold 22/12/2020
Skylarc Ref V121251
14x Chemetall Ardrox Remover/Precleaners & Penetrant Industrial Sprays.
Includes the following Chemetall products:
- 6x full unused and 1x partial used 300g Spray Bottles of Ardrox 9PR50C Remover Precleaners.
- 6x full unused and 1x partial used 300g Spray Bottles of Ardrox 907PB Penetrant.
Condition - 12x units appear full unused though exteriors show dust and grime fro open Workshop Storage. 2x cans are partially used.
Buyer pickup only.
Sold 22/12/2020
Skylarc Ref M120228