Skylarc's ROH Engineering Closing Down Auction

2008 Hyundai 3 Ton Diesel Forklift

$22,006

Sold 01/10/2018

Skylarc Ref O103879

2008 Hyundai 30D-7 Diesel Forklift
2775 kg load capacity
3 stage container mast
Kubota V3300 engine
1140mm wide carriage
1050mm long forks
Max lift 4300mm
Side shift
Pneumatic tyres
1144 hours on clock
Very tidy, extremely low hour machine

See our video of this machine operating by copying this link into your browser
https://youtu.be/URZH3oF6WE4

This machine will not be available for collection until Friday 18th of October

Almega Industrial Welding Robot

$19,150

Sold 30/09/2018

Skylarc Ref A103813

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: A103813

OTC Daihen Almega AX-MV6L Robot Manipulator
Model: AXMV6L1-NEFN
Manufacturered 2006
OTC DM-350 robot welding inverter
OTC AXCML1-C000 robot control box
OTC AXTPDSON-ECO8(L9244) robot teach pendant
Powered shaft rotator
Robot was formerly welding shafts on the rotator

See our video of this machine operating in the photos section

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Turned On – The product has been switched on and powers up, but hasn’t/can’t be tested further

Location: Workshop -A9

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Demmeler Welding Table and Accessories

$17,051

Sold 30/09/2018

Skylarc Ref T104092

Demmeler Modular Engineering Table
23mm cast table
Adjustable height legs
Accessory trolley
Angle bracket sets include
3001, 3002, 3003, 3004
Large number of pins, clamps and joiners

Almega Industrial Welding Robot

$16,550

Sold 01/10/2018

Skylarc Ref I103821

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: I103821

Daihen OTC Robot Manipulator Almega EX-MVSL
Model EXMV6L-NEFN
Manufactured 2002
OTC CPVAS350 welding power source
OTC EX-C robot controller
Model: EXCML1-J000
OTC L8504 teach pendant
Large powered shaft rotator
Robot built onto large steel frame with plate steel bench
Bench and frame unit dimensions 3840mm long x 2350mm 890mm tall
2 x Electronic safety guards
Manuals
Formerly used for welding shafts

See our video of this machine operating in the photos section

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Turned On – The product has been switched on and powers up, but hasn’t/can’t be tested further

Location: Workshop -A9

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Heavy Goods Collection Days:
Wed 10th - Fri 12th
Mon 15th - Thurs 18th
9:00am - 4:30pm

We will have a forklift and operator onsite to assist but you will need to organise any specialist lifting equipment and tooling yourself

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Large Burny Profile Cutter

$16,200.01

Sold 30/09/2018

Skylarc Ref P103828

Model: Burny Phantom MNT-13240 control unit
Running Windows XP
Koike Sanso Kogyo IK-2500 CE gas controller and rails
3200mm x 1470mm x 600mm tall cutting table
5400mm long rails

See our video of this machine operating in the photos section

Hafco MetalMaster Metal Cutting Guillotine

$15,583

Sold 01/10/2018

Skylarc Ref X103810

Model: Metalmaster HG-2504 hydraulic guillotine
Three phase
Cutting width 2500mm
Cutting thickness 4mm
NC-89 controls
Guards with sensors
Machine has seen very little use since new
For full specs see:
https://www.machineryhouse.co.nz/S934S

2011 Hyundai 1.8 Ton Diesel Forklift

$15,050

Sold 30/09/2018

Skylarc Ref N103878

2011 Hyundai 18D-7E
Load Capacity 1415kg
3 stage container mast
1005mm wide carriage
1050mm long forks
Kubota V2203-M-EU36 4 cylinder engine
Only 843 hours on clock
Max lift 4735mm
Side shift
Solid tires
Very low hour late mode machine.

See our video of this machine operating by copying this link into your browser
https://youtu.be/SngPNsr62AQ

This machine will not be available for collection until Friday 18th of October

Hafco MetalMaster Hydraulic NC Panbrake

$13,451

Sold 30/09/2018

Skylarc Ref Y103811

Model: Hafco MetalMaster PB-830A
Hydraulic guillotine
2500mm folding width
4mm mild steel folding capacity
0-125mm bending angle
Has seen very little use from new
For full specs see:
https://www.machineryhouse.co.nz/S584A

See our video of this machine operating in the photos.

Yang MLS-25A Twin Spindle CNC Lathe

$11,850

Sold 01/10/2018

Skylarc Ref W104095

Model: Yang MLS-25A
Twin spindle CNC lathe
FANUC Series O-T control panel
4659 running hours
Max distance between centres 780mm
Swing bed: 376mm
Max machining diameter: 280mm
Max longitudinal travel: 594mm
Max cross travel: 594mm
No.1 spindle bore 77mm
No.2 spindle bore 52mm
Both chucks 250mm diameter
12 tool carousel
Manufactured 1995
Some chuck jaws
Manuals
Cabinet of assorted bits and pieces

See our video of this machine operating in the photos section

Hafco MetalMaster Lathe

$11,149

Sold 01/10/2018

Skylarc Ref J103770

Hafco MetalMaster CL68A 510x1500 lathe
Three phase 7.5kw main motor
1500mm between centres
Swing bed: 510mm Gap: 735mm Cross Slide: 305mm
Spindle bore 80mm
12 spindle speeds 25-1600rpm
Taper cutter
Metric and imperial thread cutting
Easson ES-14 digital readout
Coolant pump
Steady
445mm Faceplate
400mm four jaw chuck
310mm three jaw chuck
Quick change tool post
2 x live centres, chuck and some tooling
Heavy duty steel workshop trolley with accessories
For full specs see:
https://www.machines4u.com.au/view/advert/METALMASTER-Centre-Lathe-CL-68A-510-x-1500mm/61512/

See our video of this machine operating in the photos section

Cammac 100 Ton Workshop Press

$9,100

Sold 01/10/2018

Skylarc Ref W103809

Model: Cammac HPB-1010
100 Ton capacity
Work plate 980mm wide x 450mm deep x 35mm thick
Spear length 330mm
Three phase
External hydraulic power pack

See our video of this machine operating in the photos section

Yang ML-25A CNC Lathe

$9,000

Sold 30/09/2018

Skylarc Ref S104091

Yang ML-25A CNC Lathe
Single spindle
FANUC Series O-T control panel
11kw main motor
Swing over bed 550mm diameter
Swing over saddle 350mm diameter
Distance between centres 600mm
Max longitudinal travel 520mm
Max cross travel 216mm
Spindle bore diameter 77mm
Spindle speeds 45-4500rpm
250mm chuck diameter
8 tool carousel
Run time 756 hours
Trolley with bits and pieces
Assorted chuck jaws
Manuals

See our video of this machine operating in the photos section

Chen Ho CNC Vertical Machining Centre

$8,100

Sold 01/10/2018

Skylarc Ref U104093

Model: Chen Ho MCV-1000
1400mm x 650mm milling table
1000 mm x travel
250mm y travel
550mm z travel
190mm -740mm spindle end to table top
BT40 spindle taper
35-6000rpm spindle speed
16 tool carousel
Golden Sun CNC-251R 4th axis
3 x AutoWell CNC machine vices
Some manuals

See our video of this machine operating in the photos section

Wongong Metal Cutting Bandsaw

$8,010

Sold 30/09/2018

Skylarc Ref T103806

Model: Wongong WBS400A Bandsaw
Three phase
400mm cutting length
Semi automatic
Power back feed
With single phase chip conveyor includes 2000mm long exit rollers

See our video of this machine operating in the photos section

C.M.T. Ursus 250 Lathe and Accessories

$7,700

Sold 30/09/2018

Skylarc Ref Y104097

C.M.T. Ursus 250 Lathe
2000mm between centres
Swing bed: 250mm gap : 300mm cross slide: 120mm approx
Metric and imperial thread cutting
12 spindle speeds
23 - 1000rpm
Three and four jaw chucks
Face plate
Steadies
Sony digital readout
Quick change tool post
Several tool holders
Assortment of tooling
Live and dead centres
Two trolleys full of accessories

See our video of this machine operating in the photos section

Takisawa TC2 CNC Lathe with Bar Feeder

$7,060

Sold 01/10/2018

Skylarc Ref R104090

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: R104090

Model : Takisawa TC2 CNC Lathe
Machine dimensions 1900mm long x 1300mm wide x 2000mm tall
Maximum swing 350mm bed
320mm carriage
Working diameter 210mm
Max working length 300mm
Spindle bore diameter 58mm
Main motor 5.5kw
8 tool carousel
1549 running hours
Alps bar feeder
Model: Alpen-Bar Model ASR-P P-45
Material diameter 0.59"-1.77"
Max material length 13'
3130mm long x 750mm wide x 1100mm tall
Includes manuals for lathe and bar feeder
Wide range of chuck jaws

See our video of this machine operating in the photos section

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Basic Test – The products main function has been tested and operates

Location: Workshop -C3

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Heavy Goods Collection Days:
Wed 10th - Fri 12th
Mon 15th - Thurs 18th
9:00am - 4:30pm

We will have a forklift and operator onsite to assist but you will need to organise any specialist lifting equipment and tooling yourself

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Mechanicy Milling Machine

$7,000

Sold 30/09/2018

Skylarc Ref B104100

Mechanicy FWA.41M milling machine
Three phase
Separate transformer
400mm x 2000mm main table
1060mm x 350mm x 430mm geared power feeds
24 milling spindle speeds
21.5 - 2000rpm
21 horizontal spindle speeds
28 - 1300rpm
15hp main motor
Sony LH10-2010 digital readout
Large mill vice
3 horizontal shafts
Large extension table
Bench load of assorted parts and and steel bits and pieces
Custom made work platforms with steel frames and wooden tops
You will need a hiab or similar lifting machine for collection
Machine weighs 5.8 ton

See our video of this machine operating in the photos section

ROH Custom Diesel Sweeper

$6,500

Sold 01/10/2018

Skylarc Ref Y103863

Custom made sweeping machine
Powered by Nissan SD25 diesel engine
Prototype road sweeper
Brush width 2050mm
Two outrigger brushes with one central brush
Rear opening waste collection with hydraulic lifting system
Rear wheel drive
Sliding operators seat and control column for left or right side operation
All hydraulically driven
Large removable filter above rear waste compartment
Machine is basically unused
Never quite worked properly a project for someone

See our video of this machine operating in the photos section

HMV Pedestal Drill Mill

$5,931

Sold 30/09/2018

Skylarc Ref I103769

HMV Combi B32 Milling and Drilling Machine
Three phase
High and low speed motor
4 gear ranges giving 8 speeds
2 ratios on milling wheel
580mm x 245mm 2 axis milling table
Fitted with swiveling tilting mill vice 13mm chuck
Top quality Swedish machine

See our video of this machine operating in the photos section

MEGA Automatic Metal Cutting Bandsaw

$5,410

Sold 01/10/2018

Skylarc Ref U103807

Model: MEGA H-330GA
Fully automatic bandsaw
Max cutting capacity 350mm wide x 330mm high
Blade speeds 20 - 80 m/min
3.75 kW main motor
Micro processor controlled back gauge
Incudes feed and exit rollers
Has faulty optical sensor on one wheel
Back gauge untested

See our video of this machine operating in the photos section

AB Arboga Maskiner Radial Arm Drilling Machine

$5,327.20

Sold 01/10/2018

Skylarc Ref F103766

AB Arboga Maskiner Radial Arm Drill
Model: ER1830
Three phase
High and low motor speeds
4 speed gear head drive
80, 122, 160, 245, 290, 445, 580, 885 rpm spindle speeds
500mm x 500mm height adjustable swivel table
600mm arm
Fitted with 13mm Jacobs chuck
Coolant pump
AutoWell mill vice

See our video of this machine running in the photos

Meuser & Co. Lathe

$5,002

Sold 01/10/2018

Skylarc Ref X104096

Meuser & Co three phase lathe
Approx 1100mm between centres
Swing bed: 180mm Gap: 200mm approx Cross slide: 120mm approx
Spindle bore diameter 43mm
8 spindle speeds
24-900rpm
Metric and imperial thread cutting
Three jaw chuck
Four jaw chuck
Steadies
Quick change tool post
Assortment of tool holders
Some tooling
Trolley of bits and pieces

See our video of this machine operating in the photos section

Ceccato Rotordry CSA20 Industrial Air Compressor

$4,570

Sold 30/09/2018

Skylarc Ref I104835

Ceccato Rotordry CSA20 Industrial Air Compressor.
Type No. RDRY20/8.
Made in Italy by Ceccato Aria Compressa Spa.
Manufacture date 2004.
Runtime hours - 24,253 hours.
Working pressure - 8 BAR.
See id label photo for further spec details.
Includes air cooler drier Attachment.
Condition - Unit appears to run normally.

See our video of this machine operating in the photos section

Leadwell CNC Vertical Machining Centre

$4,110

Sold 01/10/2018

Skylarc Ref L104084

Believed to be Leadwell MCV-1000
Unknown machining specifications
FANUC OM series controller
24 tool carousel
1000mm x 500mm bed
Fitted with large double acting machine vice
Floor mounted gantry with demag crane
Manuals
Some tooling

See our video of this machine operating in the photos section

FANUC CNC Tape Center-Model D with 4th Axis

$4,020

Sold 01/10/2018

Skylarc Ref K104083

Model: Tape Center-Model D
7.5kw spindle motor
Table dimensions 780mm x 380mm
FANUC system 6M controller
X travel 500mm
Y travel 380mm
Z travel 400mm
Spindle to table 180-580mm
Spindle speeds 20 - 2500rpm or 35 - 4500rpm
NT30 tooling
10 tool carousel (2 positions damaged)
Yukiwa Super Divider DEB160R 4th axis
2 x AutoWell CNC machine vices
Assorted tooling fitted
Manuals

See our video of this machine operating in the photos section

Lincoln Electric MIG Welding Station

$4,020

Sold 30/09/2018

Skylarc Ref Z103812

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: Z103812

Floor mounted overhead welding platform
950mm x 1050mm x 500mm tall step
Overhead gantry for wire feed
Arm extends to 3900mm
Lincoln Electric 350 PowerPlus 2
welding power supply
350 amp welding at 60%
PWF-4GS wire feed
With stand

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Basic Test – The products main function has been tested and operates

Location: Workshop -A7

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Geka Microcrop Hydraulic Punch and Shear

$3,789

Sold 30/09/2018

Skylarc Ref V103808

Model: Geka Microcrop 36
Punching force 36 ton
Angle and bar cutting
Notching
Three phase 2.2kw motor
Foot control
Includes manual

See our video of this machine operating in the photos section

Stankoimport Milling Machine

$3,785

Sold 30/09/2018

Skylarc Ref L103772

Stankoimport 6P80W
3kw three phase main motor
800mm x 200mm working surface milling table
Max table travel
longitudinal 500mm
Transverse 160mm
90 degree mill head swivel
M4 mill head taper
12 horizontal spindle speeds 50-2240rpm
12 milling head spindle speeds 56-2500rpm
Dividing head and tailstock
Some shafts and other accessories
Manual!!!

See our video of this machine operating in the photos section

Custom Made Horizontal Broaching Machine

$3,531.02

Sold 30/09/2018

Skylarc Ref B103814

Custom made horizontal broaching machine
Made from Stankoimport heavy duty shaper
Includes 16 broaches
8 keyway broaches
8 spline broaches
Cabinet of broach collets
Incudes original shaper parts

Farman Universal Drill Grinder

$3,510

Sold 30/09/2018

Skylarc Ref M103825

Model: Farman FC-50N
Single phase
1/2 hp
Integrated pump
Stone balance
Box of stones and other accessories
Manual

See our video of this machine operating in the photos section

AB IndustriMaskiner Gear Head Pedestal Drill

$3,481

Sold 30/09/2018

Skylarc Ref G103767

AB IndustriMaskiner Gear Head Pedestal Drilling Machine
3 phase 1.5hp motor
High and low speed motor
4 gear ranges giving 8 spindle speeds
100, 160, 200, 320, 410, 640, 820, 1280 rpm
385mm diameter adjustable height table
Adjustable height head
Fitted with 13mm chuck
Top quality Swedish machine

See our video of this machine operating in the photos section

Manual Hydraulic Workshop Press

$3,450

Sold 30/09/2018

Skylarc Ref D103816

Manual H frame workshop press
Unknown capacity
Spear length 600mm
54mm diameter at end
Fast and slow levers
Adjustable height table with cable lifts
Ram leaks around seal at full extension

Bowers XT Extreme Holematic Digital Bore Gauge Set, as New

$3,340

Sold 30/09/2018

Skylarc Ref U103521

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U103521

Bowers XT Extreme Holematic Digital Bore Gauge Set.
50-100mm range set.
Includes all components, wood case, manuals and original box.
Appears as new and unused complete set. Blue box exterior shows some wear and stains from workshop storage. Gauge Set appears as new and still has anti-rust wrapping still on all components, most were temporarily briefly unwrapped for photos only.

Product Condition: As New – The item is removed from its packaging but is otherwise new

Product Test Info: Turned On – The product has been switched on and powers up, but hasn’t/can’t be tested further

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Haas Servo Rotary Table

$3,111

Sold 30/09/2018

Skylarc Ref C103763

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: C103763

Haas HRT 9 servo rotary table
9" table
Transformer
Servo control unit
Manual
Does not power up, unknown fault but suspect power supply

Product Condition: Average – The Item is a middle of the road example it may need some minor repairs

Product Test Info: Broken Can’t Test – The product can’t be tested as its function is broken in some way

Location: Workshop -A3

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Energy Radial Arm Drilling Machine

$3,051.50

Sold 01/10/2018

Skylarc Ref H103768

Energy 30/600/1000 128 radial arm drill
Three phase 1.9hp drilling motor
High and low speed motor
Geared drilling head
4 range gearbox giving 8 spindle speeds
80, 122, 160, 244, 290, 445, 580, 890 rpm
Forward and reverse
Electric arm raise and lower
900mm long arm
500mm long x 400mm wide x 500mm tall drilling block
1230mm x 610mm x 20mm thick plate steel drilling surface

See our video of this machine operating in the photos section

Modernised WMW Modul Gear Hobbing Machine

$2,810

Sold 30/09/2018

Skylarc Ref G104079

Model: WMW Modul ZFWZ 250/3
Machine has undergone significant modernisation.
Including LCD display and VSD motor controls
Max workpiece diameter 250mm
Max module 6mm
Max axial feeding travel 275mm
Max tangential feeding travel
Max helix angle 45 degrees
Max hob diameter 145mm
Max hob length 170mm
Hob speeds 50 - 200rpm, 125 - 400rpm
Main motor 9kw
Cabinet full of change gears
Steel bench with assorted shafts, tooling and accessories

See our video of this machine operating in the photos section

VHU Boring Head Set

$2,700

Sold 30/09/2018

Skylarc Ref C103425

Model: Narex VHU 125
Adjustable boring head
In case with accessories
For full specs see:
http://www.narexmte.cz/system/enMTE_vcc2C3_01AA.htm

Stanko Tool Cutter Grinder

$2,610

Sold 01/10/2018

Skylarc Ref O103801

Model: Stanko 33C 3B642 tool cutter grinder
Three phase
Grinding length:450mm
Grinding diameter:200mm
Workpiece height:220mm
Spindle speed max.:6300 rpm
Grinding wheel diameter:200 mm
Grinding spindle - swivable:306 degrees
Table surface area:240mm x1000mm
Table travel longitudinal:450 mm
Table travel cross:260 mm
And accessories, grinding wheels etc on trolley

Ercole Automatic Power Hacksaw

$2,600

Sold 30/09/2018

Skylarc Ref U103833

Model: Ercole Ercolematic 270R
450mm blades
Automatic and manual modes
Three phase
Power feed rollers

See our video of this machine operating in the photos section

Stanko XC3 Cylindrical Grinder

$2,600

Sold 01/10/2018

Skylarc Ref Z104098

Model : Stanko XC3 3A151
500mm stone diameter
Capacity 200mm
Grinding length 700mm
Three phase
Includes guards and some accessories
Rack of assorted steel bits and pieces

See our video of this machine operating in the photos section

ROH Diesel Ride On Coring Machine

$2,570

Sold 01/10/2018

Skylarc Ref X103862

Model: ROH Ride On Aerator
Powered by 4 cylinder Isuzu Diesel
1620mm wide corer
106 hours on clock
Believed to be prototype unit
Production units had a significantly heavier aerator gearbox
Runs but aerator has broken chain and may have other unknown faults
Two corer tynes not running

See our video of this machine operating in the photos section

Mori Seiki SL-4 CNC Lathe

$2,550

Sold 30/09/2018

Skylarc Ref V104094

Model: Mori Seiki SL-4A
FANUC Model 3T F controller
Max swing diameter 650mm
Max cross travel 235mm
Max longitudinal travel 610mm
Max machining diameter 600mm
Spindle bore diameter 77mm
10 tool carousel
250mm diameter chuck
22kw main motor
Chip conveyer
Assortment of chuck jaws
Floor mounted work stand
Manuals

See our video of this machine operating in the photos section

HMT Production Turret Lathe

$2,410

Sold 01/10/2018

Skylarc Ref K103771

HMT production turret lathe
Unknown model
Very heavy duty machine
6 tool turret
900mm between centres
Approx 250mm swing over bed
Approx 65mm spindle bore
Spindle speeds from 32-1400rpm
Metric and imperial thread cutting
2 x 300mm three jaw chucks
400mm faceplate
Cupboard of assorted tooling

See our video of this machine operating in the photos section

Argo CNC Vertical Machining Centre with 4th Axis

$2,230

Sold 30/09/2018

Skylarc Ref I104081

Model: Argo MCV-1050P CNC Vertical Machining Centre
Table dimensions 1250mm x 850mm
Max table load 600kg
X axis travel: 1050mm
Y axis travel: 510mm
Z axis travel 510mm
Spindle to table 130mm - 740mm
11kw spindle motor
40 - 4000rpm
30 - 3000rpm
24 tool carousel
BT40 tool holders
Mitsubishi Meldas M3 CNC controller
Golden Sun CNC-251R 4th axis
Some tooling fitted
Trolley with some bits and pieces
Manuals
Gantry for loading 4th axis (no crane)
Manufactured 1993
Unknown Fault machine powers up but won't run

See our video of this machine operating in the photos section

Bowers Digital Bore Micrometer Set

$2,141.20

Sold 01/10/2018

Skylarc Ref I103483

Bowers XT Xtreme Holematic
20mm - 50mm set
3 micrometers
20mm-25mm
25mm-35mm
35mm-50mm
With reader, case and instructions

Hitachi 250kg Electric Chain Hoist w/ Custom Swing Arm Beam

$2,115

Sold 01/10/2018

Skylarc Ref K103615

Hitachi 250kg Electric Chain Hoist w/ Custom Swing Arm Beam.
Type No. 1/4SN2.
Manufactured in 2014.
250kg max lifting capacity.
3-metre lifting chain length.
Powered by a 3-phase motor.
Controled by Corded control unit Model No. PB-2N2H.
See photo of ID label for more unit specs.
Includes the custom in-house built floor mounted swing beam. Beam is 3000mm tall with approx 2700mm main horizontal beam reach, as well as an additional black extension roller that extends horizontal reach another 500mm approx.

Churchill Gear Hobbing Machine

$2,010

Sold 01/10/2018

Skylarc Ref N103800

Model: Churchill PH2415 24" Universal Gear Hobbing Machine
7.8kw main motor
Max workpiece diameter 610mm
Max pitch 8 mod
Max horizontal centre 380mm
Max horizontal travel 330mm
Max height hob centre to workable 508mm
Max hob diameter 178mm
Max hob length 203mm
Wide range of change gears :
35T, 36, 41, 42T, 45T, 48, 55T, 2 x 56T, 63T, 67, 66, 65T, 60T, 70T, 72T, 81T, 90T, 100T, 54, 64T, 57T, 30, 108, 89T, 40T, 60T
Manuals
Machine won't power up, seems to have a power supply issue

Milko 20 Milling Machine

$2,000

Sold 01/10/2018

Skylarc Ref V103834

Model: Milko 20
Milling table dimensions 1100mm x 250mm
Manual Z traverse
Power X and Y traverse
Swivel mill table
3hp main motor
1hp milling spindle motor
6 milling spindle speeds 177 - 1420rpm
12 horizontal spindle speeds 50 - 1500rpm
Three phase

See our video of this machine operating in the photos section

Mechanicy Mill Indexing Head

$1,600

Sold 01/10/2018

Skylarc Ref W103705

Mechanicy model F4B
Dividing head
with tailstock
Manufactured 1970

EMF Spot Welder

$1,530

Sold 30/09/2018

Skylarc Ref J103822

Model: EMF TAE 32 Z
5.1 Kva spot welder
Three phase

Jiffy Electric Walk Behind Forkhoist

$1,530

Sold 30/09/2018

Skylarc Ref S103805

Jiffy battery hoist
Model P.H.S. Power Hand Stacker
1000kg capacity
Electric drive and lift
With charger
Does not operate
Maybe faulty batteries or charger
Unknown fault

Small Workshop Sheet Metal Folder

$1,510

Sold 30/09/2018

Skylarc Ref K103849

Unknown make or model
1230mm wide folding width
Sheet metal finger folder

Press Brake Tool

$1,389

Sold 30/09/2018

Skylarc Ref U103911

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U103911

Press brake top plate and v block
Plate length 980mm
V block 980mm
Mounting for plate 630mm

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -A8

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Heavy Duty Hydraulic Workshop Press

$1,361

Sold 01/10/2018

Skylarc Ref C103815

Three phase custom made press
5 1/2 hp motor
Hydreco AJ30-3 hydraulic pump
560mm x 560mm x 25mm thick plate work top
44mm diameter x 400mm long spear
Built on heavy duty steel frame

See our video of this machine operating in the photos section

Fenn Swaging Machine

$1,310

Sold 30/09/2018

Skylarc Ref R103830

Fenn 3 1/2 Swager
Capacity: 1 3/4" (44mm)
Three phase
Previously used for swaging the ends of corer tynes

See our video of this machine operating in the photos section

Royal Combo CNC Bar Puller 43635

$1,261

Sold 30/09/2018

Skylarc Ref U103599

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U103599

Royal Combo CNC Bar Puller 43635.
Made in USA.
Part No. 43635.
Includes extra spring finger bars.
Includes box.
See the manufacturer PDF file link below for further spec details:
https://www.google.co.nz/url?sa=t&source=web&rct=j&url=http://www.royalproducts.com/content/files/products/Combo_CNC_BP.pdf&ved=2ahUKEwiGqPKNk5PdAhWb-2EKHdECA_UQFjAAegQIARAB&usg=AOvVaw3VABCGPxUmDblXG-w-ynGu&cshid=1535576264778

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Large Lot of Steel Lengths

$1,213

Sold 01/10/2018

Skylarc Ref Q103803

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: Q103803

Huge assortment of steel
Angle
Chromed bar
Bar
Flat
Pipe
Lengths up to 6.6 metres

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C7

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Heavy Goods Collection Days:
Wed 10th - Fri 12th
Mon 15th - Thurs 18th
9:00am - 4:30pm

We will have a forklift and operator onsite to assist but you will need to organise any specialist lifting equipment and tooling yourself

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Kew Three Phase Steam Cleaner

$1,201

Sold 30/09/2018

Skylarc Ref Q103829

Model: KEW 3040HA
Diesel water heater
Max temperature 150c
Turns on and pump runs but has not been tested with diesel or water

Hafco Belt Drive Linasher Sander

$1,145

Sold 30/09/2018

Skylarc Ref Q104089

Model: Hafco BS-152
Belt sander linasher
Three phase
Adjustable angle
150mm wide belt

See our video of this machine operating in the photos section

Hitachi 500kg Electric Chain Hoist

$1,121

Sold 01/10/2018

Skylarc Ref C103295

Hitachi 500kg Electric Chain Hoist.
Type No. 1/2SNH2
Manufactured in 2008.
500kg max lifting capacity.
6-metre lifting chain length.
Powered by a 3-phase motor.
Controled by Corded control unit.
See photo of ID label for more unit specs.
Lift will be unmounted from rail and disconnected from power before buyer pickup. Auction is for Hoist only, gantry crane rail is not included.

See our video of this machine operating in the photos section

Bowers XT Analogue Bore Gauge Set

$1,063

Sold 30/09/2018

Skylarc Ref D103036

Bowers XT Analogue Bore Gauges
20-50mm set
In case
For full specs see:
https://www.bowersgroup.co.uk/row/xta1m-mechanical-bore-gauge-xt-analogue-metric.html

Hafco MetalMaster BG-12 3-Phase Bench Grinder w/ Stand

$1,031.30

Sold 01/10/2018

Skylarc Ref C103503

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: C103503

Hafco MetalMaster BG-12 3-Phase Bench Grinder w/ Stand.
Manufactured by Hafco in 01/2015.
Model No. BG-12.
2200W, 415V 3-Phase.
Uses 2x grinding wheels each 300mm diameter, 50mm thick.
Includes a heavy steel stand that measures 650mm long, 450mm wide (at base), and 800mm high.
Grinder itself is approx 730mm long, 420mm wide, 390mm tall.
Condition - Shows very little use. Some minor typical industrial dust and gime to base.

See our video of this machine operating in the photos section

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Basic Test – The products main function has been tested and operates

Location: Workshop -B3

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Heavy Duty 2-Door Digital Security Safe

$1,025

Sold 30/09/2018

Skylarc Ref V104432

Heavy Duty 2-Door Digital Security Safe.
Xiando branded.
Safe comprises of two separated compartments each with its own digital and physical key locks.
Inner dimensions of upper compartment are 430x300x260mm.
Lower compartment has a small inner drawer with its own separate key lock. This drawer is 230x170x90mm.
Lower main compartment is 430x300x405mm.
Safe is mounted on a heavy steel stand that is 710mm tall.
External safe dimensions are 430mm wide, 380mm deep, 730mm high.
Safe Includes keys and digital pass codes.

NZIG 350 Amp MIG Welder

$1,012

Sold 01/10/2018

Skylarc Ref G103819

Model: NZIG Transmig 350
With Millermatic S-54A wire feed
350 amp welding output

NZIG 350 Amp MIG Welder

$1,001.50

Sold 01/10/2018

Skylarc Ref H103820

Model: NZIG Transmig 350
350 amp welding output
Millermatic S-54A wire feed
Three phase

Pallet of PTO Shafts

$1,000

Sold 30/09/2018

Skylarc Ref E103895

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: E103895

14 x PTO shafts
Walterscheid brand
With covers

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -A7

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Tooline Metal Cutoff Saw

$980

Sold 01/10/2018

Skylarc Ref O103827

High - Speed Resin Abrasive Wheel Cut-Off Machine
400mm cutting wheel
2600rpm
2.2kw motor
On stand

See our video of this machine operating in the photos section

Hitachi 500kg Electric Chain Hoist

$977

Sold 30/09/2018

Skylarc Ref U103677

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U103677

Hitachi 500kg Electric Chain Hoist.
Type No. 1/2S2
Manufactured in 2001.
500kg max lifting capacity.
3-metre lifting chain length.
Powered by a 3-phase motor.
Controled by Corded control unit.
See photo of ID label for more unit specs.
Condition - Unit shows some use, operates normally, see accompanying video for details.
Lift will be unmounted from gantry rail and disconnected from power before buyer pickup. Auction is for Hoist only, gantry crane rail is not included.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Basic Test – The products main function has been tested and operates

Location: Workshop -A10

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Hitachi 500kg Electric Chain Hoist

$971.48

Sold 01/10/2018

Skylarc Ref A103293

Hitachi 500kg Electric Chain Hoist.
Type No. 1/2SNH2
Manufactured in 2007.
500kg max lifting capacity.
6-metre lifting chain length.
Powered by a 3-phase motor.
Controled by Corded control unit.
See photo of ID label for more unit specs.
Lift will be unmounted from gantry rail and disconnected from power before buyer pickup. Auction is for Hoist only, gantry crane rail is not included.

See our video of this machine operating in the photos section

OTC Welder for Robot Welder

$970

Sold 01/10/2018

Skylarc Ref M103877

Model: Daihen OTC Dyna Auto XS 350
CPXS-350
Manufactured 1994
Formerly used on Motorman Robot
350 amp output

Otos Chameleon Auto Welding Mask and Fume Extractor

$955

Sold 30/09/2018

Skylarc Ref D103088

Model: Otos Chameleon 4
With backpack
Charger

Belt Linasher Sander

$925

Sold 30/09/2018

Skylarc Ref P104088

Three phase linasher
150mm x 550mm belt
On metal stand

See our video of this machine operating in the photos section

Mitutoyo Bore Micrometer Set

$914

Sold 01/10/2018

Skylarc Ref W103419

6 manual bore micrometers
Approx 20mm - Approx 50mm capacity
In wooden case
With accessories

Bowers Bore Micrometer Set

$910

Sold 30/09/2018

Skylarc Ref G103481

20mm to 50mm capacity
3 micrometers
20mm-25mm
25mm-35mm
35mm-50mm

Hitachi 500kg Electric Chain Hoist

$905

Sold 01/10/2018

Skylarc Ref B103294

Hitachi 500kg Electric Chain Hoist.
Type No. 1/2S2
Manufactured in 1994.
500kg max lifting capacity.
3-metre lifting chain length.
Powered by a 3-phase motor.
Controled by Corded control unit.
See photo of ID label for more unit specs.
Condition - Unit shows use, untested as its currently stored in a crate.

Set of 6x Precision Micrometers w/ Case

$897.20

Sold 30/09/2018

Skylarc Ref N103592

Set of 6x Precision Micrometers w/ Case.
Unknown manufacturer.
Includes the following Micrometer sizes:
- 110-175mm
- 175-200mm.
- 200-225mm.
- 225-250mm.
- 250-275mm
- 275-300mm.
Includes small wood case with 6x adapter rods.
All items are stored in a large wood case.
Condition - Items show some use, case exterior shows grime from factory storage.

Huge Bulk Lot of Fixing Fastening Hardware

$893.80

Sold 30/09/2018

Skylarc Ref Z104852

Huge Bulk Lot of Fixing Fastening Hardware.
Wood shelf full of a wide variety of nuts, bolts, screws, pins, washers, and many other types of hardware.
Auction includes all items currently on the wood Shelving unit and immediately on the floor in front of it, see first photo.
Conditions vary, most appear to be new unused stock, some others may show previous use.
Buyer should bring extra help in removing the many items.

Hitachi 250kg Electric Chain Hoist

$805

Sold 01/10/2018

Skylarc Ref Z103292

Hitachi 250kg Electric Chain Hoist.
Type No. 1/4SN2.
Manufactured in 2014.
250kg max lifting capacity.
3-metre lifting chain length.
Powered by a 3-phase motor.
Controled by Corded control unit Model No. PB-2N2H.
See photo of ID label for more unit specs.
Condition - A recent unit showing mild use, operates normally.
Lift will be unmounted from ceiling and disconnected from power before buyer pickup.
Some photos are indicative.

See our video of this machine operating in the photos section

Heavy Duty Steel Workshop Bench with Vise

$800

Sold 30/09/2018

Skylarc Ref D103712

Box steel construction
3mm steel top
810mm tall worktop
Heavy duty swiveling metal vice

Digital Staff Fingerprint Attendance Monitor

$765

Sold 30/09/2018

Skylarc Ref E104441

Digital Staff Fingerprint Attendance Monitor.
Unsure as to its brand and model.
Includes manual, software disk, box.
Current password and licence number included.
Note - This unit was provided with a non compliant European type power plug. Per Trademe regulations we cannot sell the power adapter with the unit, as a result the buyer will have to source a NZ type replacement 9V DC, 1000mA power adapter.
Condition - The unit powers on and appears to operate but not fully tested.

AutoWell Mill Vice

$759.99

Sold 30/09/2018

Skylarc Ref M103747

AutoWell machine vise
150mm wide jaws
Max gap 230mm
Removable centre block
With handle

Large Vernier Caliper

$756.10

Sold 30/09/2018

Skylarc Ref A103423

Metric and imperial measurements
600mm capacity
Unknown brand
Wooden case

Mitutoyo Internal Bore Micrometer Set

$750

Sold 30/09/2018

Skylarc Ref X103420

Mitutoyo HOLTEST Series 368
6 manual Micrometer set
50mm - 100mm capacity
Manual
Accessories

Large Lot of Milling Cutters

$746.10

Sold 01/10/2018

Skylarc Ref L103408

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: L103408

Box of approx 30 new 8mm cutters
Approx 50 other cutters of various types and sizes
Some new
Largest size 22mm

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Bowers Bore Micrometer Set

$730

Sold 01/10/2018

Skylarc Ref V103418

Two manual bore micrometers
50mm - 75mm
75mm - 100mm
Wooden case
Accessories

Heavy Duty Steel Workbench with Vice

$715

Sold 30/09/2018

Skylarc Ref F104078

12mm plate steel top
870mm high work top
Vice with 150mm wide jaws
Steel frame
Includes contents of :
Tools
Steel bushes
Bits and pieces

Large Vernier Caliper

$712.20

Sold 30/09/2018

Skylarc Ref B103424

Metric and imperial measurements
600mm capacity
Unknown brand
In wooden case

Mitutoyo Precision 0-25mm & 25-50mm Micrometers

$706

Sold 01/10/2018

Skylarc Ref H103586

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: H103586

Mitutoyo Precision 0-25mm & 25-50mm Micrometers.
Vintage older model units.
No. 124-125 and No. 125-126.
Micrometers show a fair amount of wear and use. Case exteriors show oil grime from factory.

Product Condition: Average – The Item is a middle of the road example it may need some minor repairs

Product Test Info: Untested - The product has not been tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Heavy Duty Plate Steel Workshop Table

$705

Sold 30/09/2018

Skylarc Ref O103489

16mm plate steel top
Box steel legs and frame

15 Ton Hydraulic Workshop Press

$695

Sold 30/09/2018

Skylarc Ref O103853

Manual shop press
Hand hydraulic pump
35mm diameter x 240mm long spear

Vintage Master 6" Metal Lathe

$695

Sold 01/10/2018

Skylarc Ref V103860

Brian's first lathe
Early Master 6"
900mm between centres
150mm swing over bed
Has been modified with a number of cunning features
Three phase electric drive
Vehicle gearbox fitted to give several spindle speeds
180mm three jaw chuck
Carriage travels smoothly
Damage to the main drive gear and no change gears means no thread cutting

See our video of this machine operating in the photos section

Uni-Mig MIG Welder

$685

Sold 01/10/2018

Skylarc Ref N103826

Uni-Mig 4023 S MIG Welder
Uni-Mig KT-90 wire feed
Three phase
400 Amp max welding output
Extra long cables

Forklift Tipping Metal Bin

$676

Sold 30/09/2018

Skylarc Ref D103868

Heavy duty steel bin
On industrial castors
Forklift lifting slots
Handle for easy pushing
Tipping handle and pivot
Swarf collection, scrap metal or waste bins

93x Assorted Sizes of Tread Tap Bits

$669

Sold 01/10/2018

Skylarc Ref O103593

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: O103593

93x Assorted Sizes of Tread Tap Bits.
Large variety of sizes in metric and Imperial. Largest size is 2-inch.
Condition varies with each bit, most appear used, see photos for further details.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

15x Assorted Morse Taper Drills, Metric Sizes

$666

Sold 01/10/2018

Skylarc Ref B103606

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: B103606

15x Assorted Morse Taper Drills, Metric Sizes.
Assorted manufacturers.
Includes the following sizes:
- 29. 5mm
- 29mm
- 25.5mm (3x)
- 25mm
- 24.5mm
- 24mm (2x)
- 23mm
- 20mm (2x)
- 19.25mm
- 18.5mm
- 16mm
Condition varies with each drill, see photos.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Magnetic Table

$665

Sold 30/09/2018

Skylarc Ref J103432

Quang Dar brand
Magnetic machine table

Large Milling Machine Rotary Table

$662

Sold 30/09/2018

Skylarc Ref A103865

Model: Mechanicy 4FED
500mm diameter table
Turns freely

Hafco MetalMaster Single Phase Bench Drill w/ Steel Stand

$661.50

Sold 01/10/2018

Skylarc Ref L103538

Hafco MetalMaster Single Phase Bench Drill w/ Steel Stand.
Model No. SBD-20B.
16-speed.
Powerdd by single phase 1hp single phase induction motor.
Drill, excluding stand, is approx 600mm long, 240mm wide, 1050mm tall.
Drilling platform is 295mm diameter.
16mm keyed chuck (key is included).
Drill is bolted to a heavy steel table that is 600mm long, 450mm wide, 715mm high.
See our video of drill in operation!
Drill appears to be fairly new as shows minor use. Table is older and shows more moderate wear.

See our video of this machine operating in the photos section

Oil Dispensing System and Oil

$626.30

Sold 30/09/2018

Skylarc Ref H104080

Stainless oil dispensing unit on steel frame
2 outlets and two spares
208 litre drum of Total Drosera MS 68 machine oil
Near empty drum ProCut S38 cutting fluid
Both on steel stands

Hafco MetalMaster Single Phase Bench Drill w/ Steel Stand

$620

Sold 01/10/2018

Skylarc Ref M103539

Hafco MetalMaster Single Phase Bench Drill w/ Steel Stand.
Model No. SBD-20B.
16-speed.
Powerd by single phase 1hp single phase induction motor.
Drill, excluding stand, is approx 600mm long, 240mm wide, 1050mm tall.
Drilling platform is 295mm diameter.
16mm keyed chuck (key is included).
Drill is bolted to a heavy steel stand that is 550mm long, 355mm wide, 720mm high.
Drill appears to be fairly new model as shows generally minor use. Base stand unit is older and shows more moderate wear.

See our video of this machine operating in the photos section

Lenwin BT40 Workshop Tool Trolley

$611

Sold 01/10/2018

Skylarc Ref J103744

CNC tool holder trolley
28 x BT40 tool holder sockets
2 x lockable drawers with keys
Heavy duty castors

10x Larger Diameter Morse Tapper Drills, Imperial Sizes

$611

Sold 01/10/2018

Skylarc Ref Q103595

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: Q103595

10x Larger Diameter Morse Tapper Drills, Imperial Sizes.
Includes the following Imperial sizes:
- 2 1/4 inch.
- 1 29/32 inch.
- 1 7/8 inch.
- 1 59/64 inch.
- 1 57/64 inch.
- 1 53/64 inch.
- 1 51/64 inch.
- 1 13/16 inch.
- 1 25/32 inch.
- 1 39/64 inch.
Condition varies with each, see photos for details.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Nethanz Single Phase Spot Welder

$608

Sold 01/10/2018

Skylarc Ref R103440

Model: Minor Spot Welder Model 64
Single Phase
With case
Does not power up
Plug removed for electrical safety
Make a great steampunk laser gun!!

300mm - 400mm Outside Micrometer

$597.10

Sold 30/09/2018

Skylarc Ref J103484

300mm - 400mm capacity
In case with accessories

7 x BT40 Drill Holders and Large Diameter Drills

$570

Sold 30/09/2018

Skylarc Ref S103727

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: S103727

BIG brand BT40 Tool Holders
2 x BT40-MTA4-90
1 29/64" drill
1 27/64" drill
3 x BT40-MTA3-75
30mm drill
47/64" drill
2 x BT40-MTA2-45
20mm drill

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O5

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

67x Assorted Metal Milling Cutters & Drills

$570

Sold 01/10/2018

Skylarc Ref W103263

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: W103263

67x Assorted Metal Milling Cutters & Drills.
A variety of types and sizes, see photos for further details.
Conditions vary with each unit, some appear unused while others show use.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Heavy Solid Steel Industrial Workshop Welding Table

$558

Sold 01/10/2018

Skylarc Ref E104805

Heavy Solid Steel Industrial Workshop Welding Table.
Table top is a 40mm thick solid steel piece 1220mm long, 1110mn wide.
A 680mm long added extention has been added to one corner.
See photos for further details on table appearance etc.

Industrial 400mm Portable Ventilator Fan

$555

Sold 01/10/2018

Skylarc Ref H104834

Industrial 400mm Portable Ventilator Fan.
Manufactured by ZGLJF.
Model No. JY3-SF 16".
1500W single phase motor.
Flow rate of 128 cubic metres per minute.
400mm fan blade diameter.
Condition - Interior shows black dust from industrial usage, would benefit from a clean. Powers on and appears to run as it should.

Case of New Machining Tool Tips

$544

Sold 30/09/2018

Skylarc Ref E103453

Plastic 20 drawer cabinet full of tool tips
Huge range of types

Workshop Tool Bench

$537

Sold 01/10/2018

Skylarc Ref A103761

Panel steel cabinet
40mm thick timber top
5 tool drawers with metal runners
Adjustable shelf

Toolmaster Modular CNC Vice

$526.50

Sold 30/09/2018

Skylarc Ref Z103760

Toolmaster Modular CNC Machine Vise
200mm wide jaws
Max gap 40mm
No handle

Bowers Bore Micrometer

$526

Sold 30/09/2018

Skylarc Ref U103417

Bowers manual bore micrometer
100mm - 125mm capacity
In wooden case

Welding Rotator on Frame

$516

Sold 30/09/2018

Skylarc Ref T103832

Three phase welding rotator
Appears to be set up for a robot
Large steel frame with rollers on top

Modified Mori Seiki HR5B Horizontal Machining Centre with 4th Axis

$515

Sold 01/10/2018

Skylarc Ref P103802

Mori Seiki HR5B Horizontal Machining Centre
Modified for cutting helical gears.
X travel 850 mm 
Y travel 700 mm 
Z travel 750 mm 
table dimensions: 630mm × 630mm 
Pallet changer
60 tool carousel
spindle taper: BT50 
spindle speed: 3200 rpm
Exacta NCT-400RV 4th Axis
Fagor controller with ACS-30 servodrive
2 x custom made gear cutting tools on BT50 holders
This machine has not run in many years
It cut gears but not with the required precision
It is in unknown operational condition and may only be suited to parts.
It will be a major operation to move and must be removed by October 18th which will require some disassembly. It weighs 15 ton
Do not bid if you can't work to this timeframe.

Parts Only Motorman Industrial Welding Robot

$515

Sold 01/10/2018

Skylarc Ref S103831

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: S103831

Model: Motorman YR-K6-C000
Yasnac MRC controller and teach pendant
Manual
Had an undiagnosed fault and was retired
Not functional

Product Condition: Poor – The Item is a rough example and may need significant work

Product Test Info: Broken Can’t Test – The product can’t be tested as its function is broken in some way

Location: Workshop -E1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Heavy Duty Steel Workshop Tool Bench & Drawer Unit

$515

Sold 01/10/2018

Skylarc Ref T104820

Heavy Duty Steel Workshop Tool Bench & Drawer Unit.
Steel construction finished in a gloss red.
One adjustable shelf.
5x drawers.
Condition - Shows some mostly mild use marks, would benefit from a clean.

Sandvik 400mm Face Mill Cutter

$510.21

Sold 30/09/2018

Skylarc Ref Q103439

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: Q103439

Huge Face Mill Cutter
400mm Diameter
60mm arbor
Model: Sandvik Coromant hR265.1 400
In box

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O5

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

14-Piece BT40 MT40 Holder & Collet Set

$506.20

Sold 01/10/2018

Skylarc Ref T103598

14-Piece BT40 MT40 Holder & Collet Set.
Unknown brand.
Holder is stamped with MT40-ER40-M16.
Includes 14x collects, all but two are still wrapped in manufacturer plastic.
Set looks near new, missing one Collet, two collects and Holder are missing wrapping and they appear unused but cannot verify. Case exterior shows some mild grime from factory.

Boxes of Tool Tips

$506.20

Sold 30/09/2018

Skylarc Ref X103472

Boxes of tool tips
See photos for types and models

Milling Machine Rotary Table

$506.20

Sold 01/10/2018

Skylarc Ref Y103993

JFO model FLd
250mm diameter
Turns freely

Tapmatic SPD-7 Reversible Tapping Attachment w/ BT40 Tool Holder

$506

Sold 30/09/2018

Skylarc Ref I103509

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: I103509

Tapmatic SPD-7 Reversible Tapping Attachment w/ BT40 Tool Holder.
Includes the following:
- Tapmatic SPD-7 unit, capacity #10 - 3/4" NF.
- Big branded BT40 Auto B12E tool holder.
Both items appear near new showing very little signs of use.

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Untested - The product has not been tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Pallet of ROH Hydraulic Pipe Bender Parts

$505.11

Sold 30/09/2018

Skylarc Ref D103998

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: D103998

3 x bender frames
One with ram installed
Compete ram unit with no frames
Large number of formers in various sizes and styles

Product Condition: Average – The Item is a middle of the road example it may need some minor repairs

Product Test Info: Needs Installation – The product can’t be tested as it needs to be installed to do test

Location: Workshop -A7

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Tapping Chuck

$505

Sold 30/09/2018

Skylarc Ref H103716

ChumPower brand
3/4" - 3MT
M9-M18

Heavy Duty Custom Made Bender

$505

Sold 30/09/2018

Skylarc Ref H103846

Needs compete rebuild of the electrics
60mm diameter bending
Crack in former
Parts only

Heavy Duty Workshop Tool Bench & Drawer Unit

$501

Sold 01/10/2018

Skylarc Ref W104823

Heavy Duty Workshop Tool Bench & Drawer Unit.
Steel construction with a steel top covered with a plywood sheet.
3x lower lockable drawers, no keys included, one drawer is currently locked and other two have missing lock Latches.
Includes attached Grip Well Offset Steel Vice with 150mm wide Jaws.

Large Spline Broach

$498

Sold 30/09/2018

Skylarc Ref D103478

PTO type spline broach
31-6-006 97
6-4445X3778x1113 50
In wooden box

15x Crates of Assorted Steel Parts, Springs, Components & More

$491

Sold 01/10/2018

Skylarc Ref Y104825

15x low walled wood crates filled with a variety of steel component parts, including springs, belt/pulley wheels, pipes, brackets, bushes and more, see photos for further details.
Many parts appear to been custom made by ROH for their products.
Condition varies, most show some level of surface rusting from storage.

Heavy Duty Vice on Stand

$490

Sold 01/10/2018

Skylarc Ref T103858

Swiveling vice
150mm wide jaws
Mounted on heavy duty steel frame
15mm plate steel top

Custom Made Swarf Sucking Machine

$476.82

Sold 30/09/2018

Skylarc Ref I103847

ROH manufactured swarf sucker for cleaning machines
Three phase
Consists of a three phase extractor fan with a wheelie bin and hoses
Unsure of it works or had even been tested
No plug

Asus Desktop Computer Midtower w/ 2x Monitors

$476

Sold 01/10/2018

Skylarc Ref G104261

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: G104261

Asus Bento AD mid-tower desktop computer.
Processor - Intel Core 2 Quad Q9400 at 2.66GHz.
3Gb RAM
1x 500Gb and 1x 120Gb HDD storage drives, both wiped of old user data and operating system.
Note - There is no operating system included with this system!
Nvidia Quadro FX1700 graphics card.
Includes 2x Viewsonic 22-inch LCD monitors.
Includes Logitech USB keyboard and mouse.
Includes Shock branded computer speakers.
Includes 3x power cables, 2x DVI cables.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Basic Test – The products main function has been tested and operates

Location: Office -O7

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

500kg Electric Cable Hoist

$475

Sold 30/09/2018

Skylarc Ref Z104436

500kg Electric Cable Hoist.
Unknown brand.
Model No. Pa500a.
500kg douce cable lifting or 250kg single cable lifting.
6- metre double cable length and 12-metre single cable length.
See photos of ID label for further spec details.
Condition - Shows mostly mild wear and use. Seems to operate as it should.

30x Assorted Morse Tapper Drills, Imperial Sizes

$470

Sold 01/10/2018

Skylarc Ref R103258

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: R103258

30x Assorted Morse Tapper Drills, Imperial Sizes.
Sizes range from 33/64 inch up to 1 1/8 inch.
Conditions vary with each drill, see photos for further details on types and conditions.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Pinzbohr Adjustable Boring Bar in BT40 Tool Holder

$461

Sold 30/09/2018

Skylarc Ref E103739

Pinzbohr 27 179 adjustable boring bar
Bore range 29mm - 40mm
BT40 Tool Holder

AutoWell Mill Vice

$461

Sold 30/09/2018

Skylarc Ref L103746

150mm wide jaws
Max gap 230mm
Removable centre block
No handle

Kojex BT40 Tool Holder w/ Coolant Attachment

$460

Sold 01/10/2018

Skylarc Ref N103566

Kojex BT40 Tool Holder w/ Coolant Attachment.
Kojex branded tool holder stamped with BT40-OHER32-160.
Attachment has no visible id stamps, possibly a Coolant attachment or similar, see photos for further details.

Metal Workshop Workbench

$460

Sold 01/10/2018

Skylarc Ref U103755

Pressed steel workbench
2 lockable drawers (no keys)
Roller bearing drawer runners

23x Assorted Morse Taper Drills, Metric Sizes

$455

Sold 01/10/2018

Skylarc Ref C103607

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: C103607

23x Assorted Morse Taper Drills, Metric Sizes.
Assorted manufacturers and lengths.
Includes the following sizes:
- 22mm
- 21mm (2x)
- 19.5mm
- 17mm
- 16.5mm (2x)
- 16mm
- 16.25mm (2x)
- 15.75mm
- 15.5mm (2x)
- 14.75mm
- 14.5mm (4x)
- 14.25mm (2x)
- 13.5mm
- 12mm
Condition varies with each drill, see photos for further details.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Huge Lot of Used Tooltips

$455

Sold 30/09/2018

Skylarc Ref D103400

Plastic bin full of machine tool tips
Huge range of types and sizes
All used

Heavy Duty Workbench with Vice

$455

Sold 30/09/2018

Skylarc Ref W103757

800mm high work top
Metal covered timber top
Steel frame
Swordfish brand metal vise
150mm wide jaws
Assorted bolts, nuts and scrap steel

455mm Diameter Heavy Steel Pipe

$455

Sold 01/10/2018

Skylarc Ref W103965

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: W103965

455mm OD heavy steel pipe
3770mm long
35mm thick walls
Great for a culvert or similar

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Yard -Y3

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Hafco Bar Bender

$451

Sold 01/10/2018

Skylarc Ref A104099

Hafco UB-100 Universal Bender
With removable handle
On steel pedestal

Hitachi 250kg Electric Chain Hoist Motor Block

$450

Sold 01/10/2018

Skylarc Ref G103299

Hitachi 250kg Electric Chain Hoist Motor Block.
Type No. 1/4BF.
250kg max lifting capacity.
3-metre lifting chain length.
Powered by a 3-phase motor.
Controlled by corded control unit.
See photo of ID label for more unit specs.
Condition - Older Unit that shows moderate wear and use though operates normally.
Lift will be unmounted and disconnected from power before buyer pickup

See our video of this machine operating in the photos section

Steel Workshop Workbench

$450

Sold 01/10/2018

Skylarc Ref S103753

Pressed steel workbench
2 lockable drawers (no keys)
Roller bearing drawer runners

Set of Hillman Heavy Load Skates

$443.05

Sold 30/09/2018

Skylarc Ref V103912

Heavy load bearing roller skates

Marlco Keyway Broaches

$442

Sold 30/09/2018

Skylarc Ref L103928

Partial Broach set
5/16"
5/32"
1/8"
3/16" dumont brand broach
Set of broach collets
In case

Kojex BT40 Milling Trough Tool Coolant Adapter

$435.02

Sold 01/10/2018

Skylarc Ref P103516

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: P103516

Kojex BT40 Milling Trough Tool Coolant Adapter.
Part No. BT40-OSL32-170
Tool appears unused or was used very lightly. Box shows wear from long term storage.

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Untested - The product has not been tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Machine Vice

$435

Sold 30/09/2018

Skylarc Ref H103430

125mm wide jaws
160mm max gap
No handle
Double action

Pinzbohr Boring Head with BT40 Tool Holder

$435

Sold 30/09/2018

Skylarc Ref L103720

Pinzbohr 42 014 holder
Adjustable boring bar holder
On BT40 tool holder

64x Assorted Plastic Storage Bins

$435

Sold 30/09/2018

Skylarc Ref O104451

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: O104451

64x Assorted Plastic Storage Bins.
Includes three main sizes%
- 7x 360x360x280mm bins.
- 48x 400x300x130mm bins.
- 9x 385x255x110mm bins with carry handles.
Condition varies greatly with each bin, some are very clean from office use while others show heavy wear and oil grime from factory use.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Pallet of Chromed Steel Rod

$435

Sold 01/10/2018

Skylarc Ref Y103967

11 lengths
45mm diameter
Some rust and pitting in places

33x Aluminium Frost Fan Centre Blade Shaft Covers

$430

Sold 30/09/2018

Skylarc Ref D104440

33x Aluminium Frost Fan Centre Blade Shaft Covers.
Unknown specifically which model of ROH Frost Fan these are compatible with.
Each is 410mm diameter.
Condition - Unknown if these units are dusty from storage or from use. May be leftover factory stock though cannot verify.

Large Lot of Assorted HSS Drill Bits

$430

Sold 30/09/2018

Skylarc Ref K103407

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: K103407

Approx 120 drill bits
Largest size approx 13 mm

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Spray Smart 12v ATV Sprayer

$430

Sold 30/09/2018

Skylarc Ref R103804

Model: Spraysmart Sniper 55
57 litre sprayer
Delavan powerflo 7812-201 pump

Assorted Boxes of Tool Tips

$428.20

Sold 30/09/2018

Skylarc Ref V103470

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: V103470

Boxes of tool tips
See photos for types and models

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Solid Timber Dinning Room Table w/ 6x Matching Chairs

$424

Sold 30/09/2018

Skylarc Ref U104223

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U104223

Solid Timber Dinning Room Table w/ 6x Matching Chairs.
Solid cut timber construction with a rustic style, wood type is unknown.
Table is 1500mm long, 900mm wide, 780mm high.
Includes 6x Matching solid cut timber chairs, seat widths 475mm, seat height 455mm, back height 1015mm.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O6

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

3x Mitutoyo Precision Micrometers

$422

Sold 01/10/2018

Skylarc Ref J103588

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: J103588

3x Mitutoyo Precision Micrometers.
Includes 50-75mm, 75-100mm, and 100-125mm.
Condition varies between each unit, each shows wear and use marks. Case exteriors show grime from factory toolroom storage.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Untested - The product has not been tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Speedline Pneumatic Sheet Metal Guillotine

$420

Sold 30/09/2018

Skylarc Ref F103844

Speedline manual foot operated guillotine modified for pneumatic operation.
1900mm cutting width
Powered by two large pneumatic rams
Unknown capacity
Believed to have a leaking ram

Bowers Bore Micrometer

$420

Sold 01/10/2018

Skylarc Ref T103416

Manual bore micrometer
126mm - 152mm
In wooden case

Spray Pots, Guns and Accessories

$420

Sold 01/10/2018

Skylarc Ref X103992

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: X103992

2 x Paint spray pots
4 x Star S-770 paint guns
Pressure vessel
Hoses
Some spray gun parts
Have not been used in many years

Product Condition: Average – The Item is a middle of the road example it may need some minor repairs

Product Test Info: Needs Installation – The product can’t be tested as it needs to be installed to do test

Location: Workshop -C7

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Sykes-Pickavant PullerPack

$418

Sold 01/10/2018

Skylarc Ref O103099

Four puller pack
082800 triple 200mm spread x 140mm reach
083100 twin 200mm spread 140mm reach
082700 triple 150mm spread 80mm reach
083000 twin 150mm spread 80mm reach
In box

D. J. Power Petrol Generator

$415

Sold 01/10/2018

Skylarc Ref E103973

Model: DJ6500CLE
6kw output
Four stroke petrol engine
Machines fires with ether but won't keep running
Generator end untested

Forklift Tipping Metal Bin

$415

Sold 01/10/2018

Skylarc Ref F103870

Heavy duty steel bin
On industrial castors
Forklift lifting slots
Handle for easy pushing
Tipping handle and pivot
Swarf collection, scrap metal or waste bins

4 x Keyway Broaches

$415

Sold 30/09/2018

Skylarc Ref H104470

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: H104470

Hassay Savage HSS Broaches
12mm - 4
14mm - 4
1/2" - 4
10mm - 4

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Set of NSK Micrometers

$415

Sold 30/09/2018

Skylarc Ref R103414

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: R103414

25mm - 125mm
6 Micrometers
Metric sizes
In wooden case

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Steel Precision Engineering Table

$415

Sold 30/09/2018

Skylarc Ref V103886

Engineering's table
50mm steel top
Removable
On steel frame
With mdf cover

2x Mitutoyo Precision Micrometer Units

$410

Sold 01/10/2018

Skylarc Ref L104292

2x Mitutoyo Precision Micrometer Units.
Includes the following units:
- 100-200mm Micrometer with accessory components and vintage wood case.
- 0-25mm Micrometer with no case.
Condition - Both units show wear and use. Case shows marks and dirt from factory storage room.

2-Piece Steel Workshop Tool Drawer Cabinet Set w/ Tools

$410

Sold 01/10/2018

Skylarc Ref Y103291

2-Piece Steel Workshop Tool Drawer Cabinet Set w/ Tools.
Two separate units both manufactured by GV Tools.
Top unit has 4x drawers, lockable with keys included.
Bottom unit has two drawers and a lower 2-door cabinet.
Auction includes all tools currently stored in the drawers, see photos for details on types of included tools.
Condition of included tools varies.

2x 500kg Girder Beam Trolley Units

$407

Sold 30/09/2018

Skylarc Ref F104442

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: F104442

2x 500kg Girder Beam Trolley Units.
Both unit's Manufactured by PWB Anchor.
Both have 500kg weight limit.
Steel wheel diameter 55mm.
Width is adjustable from 64mm up to 152mm.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -B8

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Quality Workshop Heavy Duty Lift Table Trolley

$405.50

Sold 01/10/2018

Skylarc Ref F103272

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: F103272

Quality Heavy Duty Workshop Lift Table Trolley.
Manufactured by GS Geprufte Sicherheit.
500kg lifting capacity.
Lifting table is 815mm long, 500mm wide.
Table height adjustible from 280mm to 910mm.
Overall trolley length is 1025mm, push handle height is 990mm.
On heavy duty castor wheels.
Lifting functions operate smoothly. Some factory dust and grime on surfaces, would benefit from a clean.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Basic Test – The products main function has been tested and operates

Location: Workshop -A3

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Delapena Single Phase Honing Machine

$405

Sold 30/09/2018

Skylarc Ref D103842

Model: Delapena 311
Mounted on cabinet will large selection of hones and accessories
Motor runs but lower drive belt is perished and broken
Foot controlled

See our video of this machine operating in the photos section

Forklift Tipping Metal Bin

$405

Sold 01/10/2018

Skylarc Ref E103869

Heavy duty steel bin
On industrial castors
Forklift lifting slots
Handle for easy pushing
Tipping handle and pivot
Swarf collection, scrap metal or waste bins

Industrial Pneumatic Oil Drum Pump & Hose Reel System w/ Rack

$405

Sold 01/10/2018

Skylarc Ref E104831

Industrial Pneumatic Oil Drum Pump & Hose Reel System w/ Rack.
Includes the following components:
- MacNaught Retracta Pneumatic hose reel with unknown length of hose.
- MacNaught OilMaster Pneumatic Oil Pump with 900mm long pipe tube attached.
- MacNaught M50 digital oil meter dispenser unit.
- Forklift-able heavy steel frame 700mm long, 710mm wide, 1150mm high.
Total setup height including hose reel is 1530mm.
Condition - All components show oil and grease grime from factory use. Oil meter unit needs 2x new E90 type batteries to operate, current pair are depleted. All items are untested.

Forklift Tipping Metal Bin

$405

Sold 01/10/2018

Skylarc Ref G103871

Heavy duty steel bin
On industrial castors
Forklift lifting slots
Handle for easy pushing
Tipping handle and pivot
Swarf collection, scrap metal or waste bins

Big BT40 Tool Holder w/ Auto A120 Compression Tension Chuck

$405

Sold 01/10/2018

Skylarc Ref L103564

Big BT40 Tool Holder w/ Auto A120 Compression Tension Chuck.
Tool Holder is a Big BT40-ATA.
Attachment is a Big Auto-A120, CAPA.M4-M12 quick change compression tension chuck.
Condition - Item shows light usage.

Herbert Capstan Lathe

$405

Sold 01/10/2018

Skylarc Ref L103850

Model: Herbert No.4 Senior
Production lathe
2 jaw chuck
6 tool turret
Hasn't run in many years
Everything seems to move freely but has not been wired up so operational condition is unknown

Pinzbohr BT40 Metal Boring Unit

$405

Sold 30/09/2018

Skylarc Ref N103540

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: N103540

Pinzbohr BT40 Metal Boring Unit.
Item is marked with the following:
- 85
- 149
- Bore Range 100-125
No other markings found, see photos for further details on type of tool head.
Unit approx 320mm long.
Some surface rust spotting from factory toolroom storage.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Robinhood Laundry Room Sink w/ Drawers Unit

$402

Sold 01/10/2018

Skylarc Ref N103618

Robinhood Laundry Room Sink w/ Drawers Unit.
Robinhood branded.
Stainless steel sink basin approx 525mm long, 420mm wide, 205mm deep.
Chrome hot/cold tap.
Two lower drawers.
Top edge of sink is 900mm above floor.
Overall unit is 555mm wide, 565mm deep, 1050mm high including tap.
Condition - Has seen use, would benefit greatly from a clean especially around drain, see photos.

7x Assorted Iscar Milling Boring Bars

$401.25

Sold 01/10/2018

Skylarc Ref O103281

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: O103281

7x Assorted Iscar Milling Boring Bars.
Includes the following Part No's:
- SSSCL-1212F-09.
- STFPR BS 20S-16.
- SCLCR BS???
- MCLNR BS-32S-12 (2x),
- GHIR-40-6.
- BVLBNR???
All show varying signs of use. Some have been cut shorter resulting in incomplete Part numbers.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

EGA Master Pipe Threading Kit

$401

Sold 30/09/2018

Skylarc Ref R103076

EGA Master 63022-10.06
4 dies
1/2", 3/4" 1", 1 1/4"
Made in Spain

10x Larger Diameter Morse Tapper Drills, Imperial Sizes

$401

Sold 01/10/2018

Skylarc Ref S103597

10x Larger Diameter Morse Tapper Drills, Imperial Sizes.
Includes the following Imperial sizes:
- 1 31/32 inch.
- 1 61/64 inch.
- 1 55/64 inch.
- 1 43/64 inch.
- 1 41/64 inch.
- 1 37/64 inch.
- 1 5/8 inch.
- 1 19/32 inch.
- 1 7/16 inch.
- 1 19/64 inch.
Conditions vary with each drill, see photos for more details.

3x Metal Surface Roughness Comparator & Thread Parallel Sets

$401

Sold 30/09/2018

Skylarc Ref S104299

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: S104299

Includes the following sets:
- 2x metal surface roughness standard caparator flex bar composite pocket set No. 16008.
- 1x WDS Marlco Thread measuring parallels set.
See photos for further details.
Condition - Cases a bit stiff from age but overall sets are well maintained.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

MacNaught Industrial Pneumatic Grease Dispenser w/ Bucket of Grease

$400

Sold 01/10/2018

Skylarc Ref G104287

MacNaught Industrial Pneumatic Grease Dispenser w/ Bucket of Grease.
MacNaught branded grease application unit, Power-Lube model. Hose with Applicator gun attached.
Includes attached bucket of Morey's Bigfoot EP2 Grease.
Condition - Unit is very dirty and greasy from factory use, is untested.

Pinzbohr Adjustable Boring Bar

$400

Sold 01/10/2018

Skylarc Ref Q103725

Pinzbohr BT 340 42 200
Adjustable boring bar
On BT40 tool holder

Large Lot of Taps

$397

Sold 30/09/2018

Skylarc Ref H103404

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: H103404

Approx 50 assorted taps
Largest size 3/4" BSP

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

7 x G Clamps

$395

Sold 30/09/2018

Skylarc Ref A103891

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: A103891

7 x G cramps
Gaps range from 180mm - 240mm

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -B8

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Sunnen Y56-1750 PE Mandrel w/ Shoes & Stone Attachments

$394

Sold 30/09/2018

Skylarc Ref J103536

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: J103536

Sunnen Y56-1750 PE Mandrel w/ Shoes & Stone Attachments.
Unknown stone and shoes attachment types, see photos for further details.
Tool shows possible very light use, possibly unused with scratching from storage but cannot verify.

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Mitutoyo Precision Depth Micrometer Set

$390

Sold 01/10/2018

Skylarc Ref F103584

Mitutoyo Precision Depth Micrometer Set.
Unknown set id number.
Longest rod is marked 275-300mm, shortest is marked 75-100mm.
Unknown if set is complete, see photos for details on included components.
Case exterior shows moderate oil grime from factory use.

Vintage Blake Co-Ax Indicator Gauge Kit

$388.87

Sold 01/10/2018

Skylarc Ref L103590

Vintage Blake Co-Ax Indicator Gauge Kit.
Includes Harwood case and original instruction sheets.
See photo for further details.
Gauge appears in excellent condition for its age. Case exterior shows wear and grime from long term storage in factory toolroom.

Kraftwerk 3/4" Socket Set

$387.50

Sold 01/10/2018

Skylarc Ref I103431

Kraftwerk 27 piece socket set
7/8" - 2"
22mm - 50mm
Powerbar and extensions
In case

Double Ended Pedestal Grinder

$386.70

Sold 01/10/2018

Skylarc Ref J104082

Unknown brand
200mm Grinding wheel
Wire brush
Single phase

Assorted Lot of Milling, Drilling & Lathe Bits, Holders & More

$385

Sold 01/10/2018

Skylarc Ref Q104401

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: Q104401

Assorted Lot of Milling, Drilling & Lathe Bits, Holders & More.
Includes various types of drilling bits, Lathe Boring Bars, Thread tapers, and more, see photos for further derails on included items.
Variety of sizes included.
Around 28x items and sets included.
Condition varies with each item, most appear to be unused leftover stock, a few items show use and wear.

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

34 x Mill Cutters

$385

Sold 30/09/2018

Skylarc Ref T103442

Largest diameter 38mm

Zelkut Adjustable Reamer Set

$383

Sold 30/09/2018

Skylarc Ref C103035

Zelkut 8 piece adjustable reamer set
15/32" to 17/32" thru 15/16" to 1-1/16"
In wooden case

Mitutoyo 0-300mm Precision Digital Caliper

$377

Sold 01/10/2018

Skylarc Ref R104298

Mitutoyo Precision Digital Caliper.
Model No. CD-12"PMXl.
0-300mm scale.
Includes case and a mini screwdriver used for removing battery compartment cover, see last photo for details as this is a bit more complex than most calipers. Battery compartment is clean, no battery included, buyer will need to aquire a SR44X1 type battery.
Caliper looks near new but untested. Case exterior shows marks from factory toolroom storage.

Rimac Double Flaring Tool Kit

$372.50

Sold 30/09/2018

Skylarc Ref Y103083

Model: 36
In case

Precision Level

$370

Sold 30/09/2018

Skylarc Ref A103943

Riken Keisokuiki 200x0.02
No.8786
In box

Kojex BT40 Tool Holder w/ Coolant Attachment

$370

Sold 01/10/2018

Skylarc Ref O103567

Kojex BT40 Tool Holder w/ Coolant Attachment.
Kojex branded tool holder stamped with BT40-OHER32-160.
Attachment has no visible id stamps, possibly a Coolant attachment or similar, see photos for further details.

Milling Machine Adjustable Rotary Angle Plate

$366

Sold 30/09/2018

Skylarc Ref N103436

Small milling machine rotary angle plate
"News" by Yamatokoki mfg
300mm x 100mm plate on top

4x GM General Motors Hydraulic Pump Assembly Units, New

$365.50

Sold 01/10/2018

Skylarc Ref P103620

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: P103620

4x GM General Motors Hydraulic Pump Assembly Units, New.
All are Part No. 26000265.
Each Assembly casing measures approx 145mm long, 180mm wide, 205mm high.
See photos for further details on type of units.
All are new unused old replacement stock. Unknown what type or age of GM vehicle or machine these are compatible with. Box exteriors show wear and moderate dust from years of factory storeroom storage. Boxes are still factory stamped shut. Photos of open unit are indicative.

Product Condition: As New – The item is removed from its packaging but is otherwise new

Product Test Info: Untested - The product has not been tested

Location: Workshop -B1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Large Three Jaw Lathe Chuck

$365

Sold 30/09/2018

Skylarc Ref N103748

310mm diameter chuck
103mm bore
No key
Unknown brand

XMAC Magnetic Base Tap Wrench

$365

Sold 30/09/2018

Skylarc Ref T103078

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: T103078

Model: XMAC MTP-150
Capacity M4-M12
Hand thread tapping wrench with magnetic base

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Heavy Duty Plate Steel Workshop Table

$362

Sold 01/10/2018

Skylarc Ref X103758

31mm thick plate steel top
1000mm work top height
Angle steel frame
Adjustable feet
Back panel with tool holders

Mitutoyo 50-75mm Precision Micrometer

$361

Sold 30/09/2018

Skylarc Ref G103507

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: G103507

Mitutoyo 50-75mm Precision Micrometer.
Model No. TMC-75.
Condition - Micrometer itself appears new and unused still in its protective wrapping. Case and box exterior shows some minor oily fingerprints from brief handling.

Product Condition: As New – The item is removed from its packaging but is otherwise new

Product Test Info: Untested - The product has not been tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

20x Assorted Morse Tapper Drills, Imperial Sizes

$361

Sold 01/10/2018

Skylarc Ref R103596

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: R103596

20x Assorted Morse Tapper Drills, Imperial Sizes.
Includes the following sizes:
- 1 23/32 inch.
- 1 35/64 inch.
- 1 19/32 inch.
- 1 1/2 inch.
- 1 21/64 inch.
- 1 13/32 inch.
- 1 23/64 inch.
- 1 7/16 inch.
- 1 1/6 inch.
- 1 3/32 inch.
- 1 1/64 inch (2x).
- 63/64 inch.
- 3/4 inch (2x).
- 15/16 inch.
- 11/16 inch.
- 49/64 inch.
- 5/8 inch.
- 41/64 inch.
Condition varies with each drill, see photos for further details on type and condition.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Kojex BT40 Tool Holder w/ Coolant Attachment

$360

Sold 01/10/2018

Skylarc Ref P103568

Kojex BT40 Tool Holder w/ Coolant Attachment.
Kojex branded tool holder stamped with BT40-OHER32-160.
Attachment has no visible id stamps, possibly a Coolant attachment or similar, see photos for further details.

Frostfan Blades and Hub

$360

Sold 30/09/2018

Skylarc Ref X103966

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: X103966

12 Frostfan blades
Believed to be test and damaged blades
Large hub

Product Condition: Parts Only – The item is broken or worn out and may require significant repair, it may only be useful for parts.

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Yard -Y4

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

3x Sandvik Coromant U Indexible Insert Drill Bits

$356

Sold 05/10/2018

Skylarc Ref W103523

3x Sandvik Coromant U Indexible Insert Drill Bits.
All are Part No. R416. 2-013L20-31.
13.0mm diameter.
See the Sandvik link below for further details.
https://www.sandvik.coromant.com/en-gb/products/pages/productdetails.aspx?c=r416.2-0130l20-31

Condition - Items appear unused but cannot verify. Cases show grime from factory storage.

Kojex BT40 Milling Tool Holder w/ Collant Attachment

$355.05

Sold 01/10/2018

Skylarc Ref R103570

Kojex BT40 Milling Tool Holder w/ Collant Attachment.
Kojex branded.
Tool Holder is stamped with BT40-OSL32-170.
Includes Kojex branded Coolant attachment, no model stamp visible, see photos for further type details.

Precision Live Center Centre MT-4 Kit

$355

Sold 01/10/2018

Skylarc Ref D103582

Precision Live Center Centre MT-4 Kit.
TM branded?
Includes 7x attachments, some still wrapped in factory plastic.
Kit items appear near new showing very little signs of use. Case exterior show oil grime from factory storeroom.

Mitutoyo Precision 75-100mm Micrometer

$355

Sold 01/10/2018

Skylarc Ref I103587

Mitutoyo Precision 75-100mm Micrometer.
No. 126-128.
Micrometer shows very few minor signs of use. Case exterior shows oil grime from factory Tool room.

Forklift Tipping Metal Bin

$355

Sold 30/09/2018

Skylarc Ref I103873

Heavy duty steel bin
On industrial castors
Forklift lifting slots
Handle for easy pushing
Tipping handle and pivot
Swarf collection, scrap metal or waste bins

Large Assortment of Hardware, Nuts, Bolts, Screws & More

$355

Sold 01/10/2018

Skylarc Ref P103698

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: P103698

Auction of a Pallet load of a large variety of fixing and fastening hardware which includes a variety of nails, screws, nuts, bolts, various washers, pins, grease nipples and other types of fastening and fixing hardware.
Condition - Most appear to be unused leftover factory stock, box wear from storage, some may have surface rust, some appear as new, etc.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -A8

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

2x Vintage Vauxhall Bedford Replacement Pump Units

$352

Sold 30/09/2018

Skylarc Ref E103635

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: E103635

2x Vintage Vauxhall Bedford Replacement Pump Units.
Both are Part No. 7166417.
Each pump unit is approx 250mm long.
Unknown what era or model of Vauxhall Bedford vehicle these parts are compatible with, see photos for further details.
Condition - Parts appear to be old but unused units, can see inside gearing which appears clean. Exterior shows slight rust spotting in areas, steel filter screens are dented presumably from storage in their boxes. Box exteriors show moderate wear and grime from years of storage.

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Untested - The product has not been tested

Location: Workshop -B1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Large Lot of Pipe Threading Dies

$352

Sold 30/09/2018

Skylarc Ref Y103447

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: Y103447

Approx 30 sets of dies
Pipe threader dies

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Pinzbohr BT40 Tool Holder w/ Boring Bar Attachment

$352

Sold 01/10/2018

Skylarc Ref Z103578

Pinzbohr BT40 Tool Holder w/ Boring Bar Attachment.
Both units are Pinzbohr branded.
Tool Holder is marked BT 340 54 160..
Attachment is stamped 54 064

Large Drill Bits, Live Centre and Chuck

$351

Sold 30/09/2018

Skylarc Ref G103715

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: G103715

1 3/4" drill
31/32" drill
Live centre
1/32" - 1/2" JT6

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O5

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Solid Timber Dinning Room Table w/ 6x Matching Chairs

$351

Sold 30/09/2018

Skylarc Ref T104222

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: T104222

Solid Timber Dinning Room Table w/ 6x Matching Chairs.
Solid cut timber construction with a rustic style, wood type is unknown.
Table is 1500mm long, 900mm wide. 780mm high.
Includes 6x Matching silos cut timber chairs, seat widths 475mm, seat height 455mm, back height 1015mm.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O6

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Pair of 1830mm Forklift Forktruck Fork Extenders

$350.55

Sold 01/10/2018

Skylarc Ref K104239

Pair of 1830mm Forklift Forktruck Fork Extenders.
Length excluding rear support bracket is 1830mm.
Made from 10mm thick steel.
Open bottom design, inner width is 140mm, depth 50mm.
Some rusting to surfaces.

Forklift Tipping Metal Bin

$350

Sold 01/10/2018

Skylarc Ref H103872

Heavy duty steel bin
On industrial castors
Forklift lifting slots
Handle for easy pushing
Tipping handle and pivot
Swarf collection, scrap metal or waste bins

3 x Vintage Vauxhall Bedford Replacement Pump Units

$350

Sold 01/10/2018

Skylarc Ref H103898

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: H103898

3 x Vintage Vauxhall Bedford Replacement Pump Units. 
Both are Part No. 7166417. 
Each pump unit is approx 250mm long. 
Unknown what era or model of Vauxhall Bedford vehicle these parts are compatible with, see photos for further details. 
Condition - Parts appear to be old but unused units, can see inside gearing which appears clean. Exterior shows slight rust spotting in areas, steel filter screens are dented presumably from storage in their boxes. Box exteriors show moderate wear and grime from years of storage. 

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -A2

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

3 x Vintage Vauxhall Bedford Replacement Pump Units

$350

Sold 01/10/2018

Skylarc Ref I103899

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: I103899

3 x Vintage Vauxhall Bedford Replacement Pump Units. 
Both are Part No. 7166417. 
Each pump unit is approx 250mm long. 
Unknown what era or model of Vauxhall Bedford vehicle these parts are compatible with, see photos for further details. 
Condition - Parts appear to be old but unused units, can see inside gearing which appears clean. Exterior shows slight rust spotting in areas, steel filter screens are dented presumably from storage in their boxes. Box exteriors show moderate wear and grime from years of storage. 

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -A2

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Metal Workbench with Drawers

$350

Sold 30/09/2018

Skylarc Ref R103752

Pressed steel workbench
2 lockable drawers (no keys)
Roller bearing drawer runners

Huge Lot of ROH Machinery Parts

$350

Sold 30/09/2018

Skylarc Ref S103961

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: S103961

11 Crates of ROH machine parts
Believed to be coring machine parts
Gearboxes
Gears
Tyne holders
Gears
Shafts
PTO shafts
And more

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Yard -Y6

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Medium Goods Collection Days:
Monday 8th October - Tuesday 9th October
9:00am - 4:30pm

We will have a forklift and operator onsite to assist

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

32x Assorted Milling Chuck Collets

$347

Sold 01/10/2018

Skylarc Ref V103262

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: V103262

32x Assorted Milling Chuck Collets.
Two units are 50mm diameter, all others are 40mm diameter.
Unknown manufacturer.
Assorted sizes.
Includes wood Collet storage board 600mm long, 240mm wide.
Some light surface rust spotting on most Collets.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Big BT40 Tool Holder w/ Adjustable Boring Bar Attachment

$345

Sold 01/10/2018

Skylarc Ref S103571

Big BT40 Tool Holder w/ Adjustable Boring Bar Attachment.
Tool Holder is a Big BT40-BCA46-150.
Includes attached Boring Bar attachment, no visible id label on attachment.

Heavy Steel Industrial Sheeting Storage Rack

$344

Sold 30/09/2018

Skylarc Ref X104824

Heavy Steel Industrial Sheeting Storage Rack.
Constructed in ROH from heavy steel tubing.
Ideal for holding sheets of steel or plywood, plasterboard and other similar industrial sheets.
Auction includes the Assorted steel sheets currently on the rack.
Condition - Rack itself appears to be a recent construction as most of its finish paint is near new. The incuded Assorted steel panels show some surface rusting etc.

250mm 3 Jaw Lathe Chuck

$340

Sold 30/09/2018

Skylarc Ref I103717

Fuerda 250mm chuck
Inside and outside jaws

Large Lot of Machine Reamers

$332

Sold 30/09/2018

Skylarc Ref F103454

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: F103454

30 reamers total
Largest size approx 25mm
Varying conditions

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Assorted Cases of Steel Collets

$331.20

Sold 01/10/2018

Skylarc Ref X104408

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: X104408

Assorted Cases of Steel Collets.
Includes 5x cases each with an incomplete set of various steel Collets. Three cases are unbranded, one case is branded Vertex and one wooden case is Kojex branded.
See photos for details on number of Collets remaining in each case.
Condition - Most Collets still in cases appear unused. Cases show exterior wear from factory environment.

Product Condition: Very Good – The item has light signs of wear and usage but is a well above average example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O5

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

4x GM General Motors Hydraulic Pump Assembly Units, New

$326

Sold 01/10/2018

Skylarc Ref Q103621

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: Q103621

4x GM General Motors Hydraulic Pump Assembly Units, New.
All are Part No. 26000265.
Each Assembly casing measures approx 145mm long, 180mm wide, 205mm high.
See photos for further details on type of units.
All are new unused old replacement stock. Unknown what type or age of GM vehicle or machine these are compatible with. Box exteriors show wear and moderate dust from years of factory storeroom storage. Boxes are still factory stapled shut. Photos of open unit are indicative.

Product Condition: As New – The item is removed from its packaging but is otherwise new

Product Test Info: Untested - The product has not been tested

Location: Workshop -B1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

4x GM General Motors Hydraulic Pump Assembly Units, New

$325.50

Sold 01/10/2018

Skylarc Ref U103625

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U103625

4x GM General Motors Hydraulic Pump Assembly Units, New.
All are Part No. 26000265.
Each Assembly casing measures approx 145mm long, 180mm wide, 205mm high.
See photos for further details on type of units.
All are new unused old replacement stock. Unknown what type or age of GM vehicle or machine these are compatible with. Box exteriors show wear and moderate dust from years of factory storeroom storage. Boxes are still factory stapled shut. Photos of open unit are indicative.

Product Condition: As New – The item is removed from its packaging but is otherwise new

Product Test Info: Untested - The product has not been tested

Location: Workshop -B1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Assorted Milling Tools

$325

Sold 30/09/2018

Skylarc Ref B103450

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: B103450

16 total
Insert drills
Assorted cutters

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Huge Lot of Hand Tools

$325

Sold 30/09/2018

Skylarc Ref M103981

Huge lot of tools
Hammers
Mallets
Saws
Prybars
G and F clamps
Grease guns
Drill bits
Square
Level
Nut splitter
And much much more

Classic 3/4-Inch Torque Wrench by W&B

$325

Sold 01/10/2018

Skylarc Ref N104840

Classic 3/4-Inch Torque Wrench by W&B.
Branded W&B, model number is unknown.
100-500 ft/lbs torque rating.

Mitutoyo Cylinder Gage

$323.20

Sold 30/09/2018

Skylarc Ref Z103032

Model: Mitutoyo No.2046
0.01-10mm
Missing some accessories

2x 600mm Linear Actuator Units, New

$322

Sold 01/10/2018

Skylarc Ref C104413

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: C104413

2x 600mm Linear Actuator Units, New.
WX Hongba branded.
Both are Part No. HB-DJ808-24-600-880-8-LT.
600mm stroke length.
240V DC input.
Max load 7000N.
Speed 8mm/s
See photos for further spec details.
Overall size per unit 900mm long, 150mm wide, 83mm thick.
Both units are new unused in manufacturers packaging. One has been opened for photos.

Product Condition: As New – The item is removed from its packaging but is otherwise new

Product Test Info: Untested - The product has not been tested

Location: Office -O4

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

7x Assorted Morse Tapper Shank Drill Bits

$322

Sold 01/10/2018

Skylarc Ref I103535

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: I103535

7x Assorted Morse Tapper Shank Drill Bits.
Includes the following Poldi branded bits:
- 13.5mm
- 16mm
- 19.5mm
-19.75mm.
- 20mm.
Also includes the following bits:
- Somta branded 14mm bit.
- 14mm bit of unknown brand.
Condition - Unbranded bit shows modena the wear at tip, see photos. All other bits appear new unused old stock with packaging.

Product Condition: As New – The item is removed from its packaging but is otherwise new

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

6 x Plate Steel G Clamps

$321.50

Sold 01/10/2018

Skylarc Ref B103892

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: B103892

Heavy duty steel G cramps
4 missing caps
Gaps all around 220mm

Product Condition: Average – The Item is a middle of the road example it may need some minor repairs

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -B8

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

8x Assorted Milling Turning Tools

$320

Sold 01/10/2018

Skylarc Ref M103279

8x Assorted Milling Turning Tools.
Includes the following:
- unknown brand GHDR 25-8.
- unknown brand LF 151.37-2525 112B30.
- unknown brand DWLNR 2525 M08.
- unknown brand GHDR-25-4.
- Snap Tap CER 2525 M16.
- Carboloy MTHOR-2525-22.
- unknown brand/model with 90-degree bar mount.
- unknown brand/model small bar mount.
All units show wear, see photos for further details.

5x Straight Shank Milling Collet Chucks

$320

Sold 01/10/2018

Skylarc Ref U103287

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U103287

5x Straight Shank Milling Collet Chucks.
Includes the following:
- AW branded, Model C32 TER32 12/04.
- TM branded, Model ST32-ER32-100.
- unknown brand, Model C32-ER32-60L.
- Kojex branded, Model SL32-WER32-145.
- unknown brand/model unit approx 125mm long, 30mm diameter.
Condition varies with each unit, some look near new, others show light use.

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

3 x Mill Face Cutter Tools

$316.50

Sold 30/09/2018

Skylarc Ref S103701

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: S103701

Appears to be NT40 tool holders
120mm unmarked cutter
Sandvik Coromant R260.22-080-15 cutter
Secodex 220.17-064 cutter

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O5

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Adjustable Height Roller Table

$316

Sold 30/09/2018

Skylarc Ref C103867

Independently adjustable legs
60mm diameter x 400mm long rollers

2 x Bins of Broach Collets

$315

Sold 30/09/2018

Skylarc Ref M104475

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: M104475

Plastic bins of broach collets
Many S
Sizes

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O5

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

6x Assorted Metal Lathe Indexible Boring Bars & Turning Tools

$312

Sold 30/09/2018

Skylarc Ref G103533

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: G103533

6x Assorted Metal Lathe Indexible Boring Bars and turning tools.
Includes the following:
- 2x Kyocera KTKB32-3S (new in boxes, one opened for photos only).
- 1x Seco A20Q-PWLNR06.
- 1x Sandvik Coromant 151.2-25-30.
- 1x Sandvik Coromant T-Max Q-Cut LG151.2-2525-25.
- 1x Iscar SGFFH 45-R-2
Condition - Iscar bar shows wear and use, other bars appear all unused.

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Large 200mm Workshop Benchtop Vice

$311.20

Sold 01/10/2018

Skylarc Ref A104827

Large 200mm Workshop Benchtop Vice.
Swordfish Brand.
200mm jaw width.

4 x Keyway Broaches

$310

Sold 30/09/2018

Skylarc Ref F104468

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: F104468

4 x Hassay Savage HSS Broaches
5mm - 3
1/4" - 3
3/8" - 3
5/16"-3
One has small chip on end

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -C1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

Steel Adjustable Workshop Shelving Units by Dexion

$310

Sold 01/10/2018

Skylarc Ref W104251

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: W104251

Steel Adjustable Workshop Shelving Units by Dexion.
Manufactured by Dexion.
Two separate units. Both units are 610mm wide, 2070mm tall. One unit is 1840mm long, second unit is 915mm long.
Shelving shows typical Workshop wear and dirt residue.

Product Condition: Good – The item shows wear and tear from normal usage but is a serviceable example

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Workshop -B10

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

3x Sandvik Coromant Indexible Insert Drill Bits

$310

Sold 01/10/2018

Skylarc Ref X103524

3x Sandvik Coromant Indexible Insert Drill Bits.
Includes the following sizes/types:
- 2x 12.7mm diameter R416. 2-0127L20-31.
- 1x 20mm diameter R416.1-0200-20-05.
Condition - Drills appear unused but cannot verify, cases show exterior factory storage grime.

Lot of Part Boxes of Tool Tips

$307

Sold 30/09/2018

Skylarc Ref U103469

SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events

ROH ENGINEERING CLOSING DOWN AUCTION
After 52 Years this Well Known Kiwi Engineer is Retiring

Massive Online Plant and Machinery Auction
CNC and Conventional Lathes, CNC Vertical Machining Centres, Universal Milling Machines, Robotic Welders, Gear Cutting Machinery, Sheet Metal Machinery, Presses, Tooling,
AND MUCH MORE - See Sellers Other Listings!

Please read the pickup and delivery details for this auction under the description


Skylarc Ref: U103469

Boxes of tool tips
See photos for types and models

Product Condition: Excellent – May have minor wear and marking but is in otherwise perfect condition

Product Test Info: Not Applicable – This is not a product that can be tested

Location: Office -O1

Collection for this auction is by appointment ONLY
A link to our pickup booking site will be emailed with payment instructions

Small Goods Collection Days:
Thursday 4th October - Saturday 6th October
9:00am - 4:30pm

Courier items will be sent as early as possible.

Address:
1022 Manchester Street
Woolwich
Hastings

Map Link:
https://goo.gl/maps/UCqtZKgAG1F2

Viewing
Auction viewing
Friday 28th September
Saturday 29th September
9am - 4:30pm

AutoWell Mill Vice

$306.50

Sold 01/10/2018

Skylarc Ref Z103448

AutoWell machine vise on rotating table
150mm x 40mm jaws
135mm max gap
No handle

12x Assorted Morse Taper Drills, Metric Sizes

$306

Sold 01/10/2018

Skylarc Ref A103605

12x Assorted Morse Taper Drills, Metric Sizes.
Assorted manufacturers.
Includes the following sizes:
- 31.5mm
- 30mm (2x)
- 29.5mm (2x)
- 29mm
- 28mm
- 27.75mm
- 27mm
- 25mm.
- 18mm
- 17mm
Condition varies with each drill.

MacNaught Industrial Pneumatic Grease Dispenser w/ Bucket of Grease

$305

Sold 01/10/2018

Skylarc Ref H104288

MacNaught Industrial Pneumatic Grease Dispenser w/ Bucket of Grease.
MacNaught branded grease application unit, Power-Lube model. Hose with Applicator gun attached.
Includes attached bucket of Amtex Lithplex Tac Extra EP 2 grease.
Condition - Unit is very dirty and greasy from factory use, is untested.

Heavy Duty Custom Industrial Steel Rack

$305

Sold 30/09/2018

Skylarc Ref M104215

Heavy Duty Custom Industrial Steel Rack.
Custom made in factory for wood crate/Pallet. One wood crate is included and is 1450mm long, 1050mm wide, 365mm high.
Steel rack can support up to 8x similar sized crates/pallets. Vertical Spacing between each support bracket is 430mm.

OSH Aihara Threading Head

$305

Sold 30/09/2018