April Engineering Auction
Auction finished on Thursday the 25th of April 2024
28 Metre Large Steel Tower, Culvert Pipes, Who Knows
- Watchers
- 109
- Bidders
- 10
$5,255
Sold 21/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V153935
This is the former wind turbine tower from Gebbes pass.
it has been uninstalled and is now located in Christchurch for collection.
It's 28 metres tall spilt into three 9.5 metre sections that bolt together.
it's diameter at it's base is 2200mm and 1000mm at is top.
Made of steel with 20mm thick walls it weighs around 15 ton total with the bottom section being around 8 ton.
It would make some very large culvert pipes or maybe a tower for some other job.
Some technical plans are available for it.
It's been installed for about 20 years.
Collection is from the airport area of Christchurch, cranes are onsite to help load it but there will be a loading fee.
It needs to removed from the site within two weeks of auction finish.
Scott Single Phase Drill Mill
- Watchers
- 358
- Bidders
- 17
$3,000
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q153280
Scott Drilling and Milling Machine
Single phase
12 spindle speeds
Max spindle speed 1500rpm
730mm x 210mm bed
16mm chuck
150mm spindle travel
Labels have worn off
Includes mill vice
To see this machine running:
https://youtu.be/yvWC8T-y90g
Niigata Universal Milling Machine
- Watchers
- 241
- Bidders
- 9
$1,580
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R153281
Model: Niigata 3UM
Three phase
16 spindle speeds
45 - 1400 rpm
1600mm x 370mm table
NT50 spindle
Some tooling
Power feeds on all axis
X Y feed rates 20 - 800mm/min
Z feed rates 9 - 355mm/min
Rotating head
Manufactured 1978
Extremely high quality machine
To see this machine running:
https://youtu.be/PCJp1HVp8wE
2006 Holden Barina
- Watchers
- 142
- Bidders
- 16
$950
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H149218
2006 Holden Barina
147218km on clock
Automatic transmission
1600cc engine
Has engine has a ticking sound during engine revolutions but runs.
No WOF
Registration on hold
Paint scratches on front and rear bumper
Ex liquidation
To hear a video of the engine tick:
https://youtu.be/JJ3XKCcax-Y
Lincoln Three Phase MIG Welder
- Watchers
- 138
- Bidders
- 13
$850
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T151700
Model: Lincoln Electric Power Wave 405
Lincoln Power Feed wire feed
350 amp welding output
Externally mounted wire feed controls
On trolley
32 amp plug
Full specs
https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://www.westermans.com/downloads/lincolnpowerwavepdf.pdf&ved=2ahUKEwi2otj3ucyEAxXgmlYBHXh8AlMQFnoECBQQAQ&usg=AOvVaw2luCq3N9EgDSqxOKv2JaOy
Colchester Three Phase Lathe
- Watchers
- 247
- Bidders
- 7
$629
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U153284
Model: Colchester Triumph
Swing over bed approx 400mm
Swing in gap 600mm
Swing over carriage 240mm
Distance between centres 1150mm
Spindle bore approx 50mm
Number of spindle speeds 12
Spindle speed range 30 - 1200 rpm
Metric and imperial thread cutting
Tailstock taper 4MT
225mm three jaw chuck
300mm four jaw chuck
355mm faceplate
Fixed steady
Travelling steady
2 chucks
Live centre
Missing gap piece
Lincoln Electric Single Phase MIG Welder
- Watchers
- 192
- Bidders
- 11
$580
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S153282
Model: Lincoln Electric REDI-MIG Plus
Single phase
255 amp welding output
MIG gun
Machine powers up but display doesn't work
Clicks when gun trigger pressed
Atlas Copco Airlet 3-Phase Air Compressor
- Watchers
- 68
- Bidders
- 7
$521
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U147827
Atlas Copco Airlet 3-Phase Air Compressor.
Model No. LE12
Made in Sweden
Age unknown.
Tank capacity unknown, tank measures approx 1400mm long, 600mm diameter.
15kW 3-phase electric motor.
Attached control box indicates 17,259 hours run time, see photo.
Double Size Therapedic Medicoil HD Mattress with Base Frame
- Watchers
- 126
- Bidders
- 13
$406
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref P147718
Double Size Therapedic Medicoil HD Mattress with Base Frame.
Mattress approx 240mm thick.
Mattress and frame were previously used as display pieces in tiny home manufacturer's show homes. Mattress only shows very mild floor marks at ends, otherwise appears excellent condition. Some mild staining from floor dust on some ends of base frame.
See our other listings for more of these bed sets
Iscar Lathe 40x40x400mm Indexable Boring Bar
- Watchers
- 77
- Bidders
- 10
$365
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref L151874
Iscar Lathe Indexable Boring Bar.
Part No. S40V MWLNR-08W
Bar measures 40x40x400mm.
Very minor signs of possible brief use at index tip, see photos, otherwise appears in as new condition. Some damage to plastic case.
Double Size Therapedic Medicoil HD Mattress with Base Frame
- Watchers
- 98
- Bidders
- 13
$342
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q147719
Double Size Therapedic Medicoil HD Mattress with Base Frame.
Mattress approx 240mm thick.
Mattress and frame were previously used as display pieces in tiny home manufacturer's show homes. Mattress only shows very mild floor marks at one end of open bag, otherwise appears excellent condition with its protectice bag. Some mild staining from floor dust on some ends of base frame.
See our other listings for more of these bed sets
Assorted Lathe Tool Inserts
- Watchers
- 95
- Bidders
- 7
$307.22
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U152793
Assorted Lathe Tool Inserts.
Nost are Iscar branded as well as a few Kennametal and TaeguTec branded cases.
See photos for details on type and part numbers.
Unused leftover workshop parts stock. Cases show storage wear.
Assorted Iscar Lathe Tool Inserts
- Watchers
- 85
- Bidders
- 9
$306.50
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S152791
Assorted Lathe Tool Inserts.
All are Iscar branded.
See photos for details on type and part numbers. Two cases are new and still factory sealed.
Unused leftover workshop parts stock. Cases show storage wear.
6x Assorted Indexable Milling Cutters, Drills
- Watchers
- 74
- Bidders
- 5
$303
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F152700
6x Assorted Indexable Milling Cutters, Drills.
Includes:
- TaeguTec 3P TE90-332-W32-15(25251), 112mm length.
- Iscar E45 D16-W25, 100mm length.
- 2x Iscar HM90 E90A-D.88-3-W.75, both 85m lengths.
- Unknown manufacturer, Part 8D101-16.0/16.99-2520R5-7060, 108mm length.
- Unknown make/model unit with modified shank, cutting head approx 25mm diameter. Total length 100mm.
Condition varies with each unit.
Assorted Sandvik Coromant Lathe Tool Inserts
- Watchers
- 82
- Bidders
- 6
$285
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R152790
Assorted Lathe Tool Inserts.
All are Sandvik Coromant branded.
See photos for details on type and part numbers. One case has no ID label.
Unused leftover workshop parts stock. Cases show storage wear.
Large Quantity of Laminated MDF and Plywood Sheets
- Watchers
- 82
- Bidders
- 9
$282.55
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A151941
Some are full sheets 2400mm X 1200
Various finishes and thicknesses
Some are off cuts
Conditions vary and surfaces have not been inspected.
Ryobi Pedestal Drill Press
- Watchers
- 152
- Bidders
- 14
$280
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X151704
Model: Ryobi DP263 16 Speed Pedestal Drill Press
3/4hp single phase motor
220-3480 rpm spindle speeds
16mm chuck
310mm table
82mm spindle travel
Mounted on large plate
4x Lathe Turning Tools, 11x11mm Size
- Watchers
- 107
- Bidders
- 9
$280
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V148712
4x Lathe Turning Tools.
Includes the following:
Iscar SDJCR 1616H-11, 100mm lengrh, with case.
TaeguTec SCLCR 1616 H09, 100mm length, with case.
Sandvik Coromant CoroTurn RC DSSNR 1616H 09, 108mm length.
Sandvik Coromant CoroCut RF123T06-1616BM, 120mm length.
Tools all appear to likely be unused workshop stock or very lightly used
Vintage DeWalt Power Shop DW125 Radial Arm Saw
- Watchers
- 71
- Bidders
- 6
$260
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref B151864
Vintage DeWalt Power Shop DW125 Radial Arm Saw.
300mm diameter blade.
Custom built MDF table attached.
Single Phase.
Operates but not tested at length.
Kennametal 32x32x310mm Lathe Boring Bar w/ Detachable Index Head
- Watchers
- 77
- Bidders
- 3
$250
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M151875
Kennametal Lathe Boring Bar w/ Detachable Index Head Assembly.
Bar part No.BSD-32U NH7 and measures 32x32x310mm.
Includes attached Kennametal Indexable Boring Bar Head Assembly part No. H20-MWLNR4 NJ7.
Both items show no real signs of any usage and appear as new. Plastic case shows exterior workshop storage wear.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 77
- Bidders
- 5
$248
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R152192
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 91
- Bidders
- 6
$242
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U152195
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 156
- Bidders
- 11
$240
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S152193
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Assorted Lathe Chuck Jaws & More
- Watchers
- 27
- Bidders
- 4
$229.78
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref P151956
Assorted Lathe Chuck Jaws & More.
Unknown manufacturer.
All have 32mm widths 10mm diameter bolt holes spaced 20mm apart on centre.
Heights, lengths and ends of jaws vary depending on their usage type, etc. A basic rectangle Jaw is 75mm in length
No actual chuck included.
See photos for further details on styles of jaws included.
Includes a few other assorted items if unknown type.
Some items show surface rust.
Assorted Morse Taper Drills & Shank Adapters
- Watchers
- 69
- Bidders
- 6
$225
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M152785
Assorted Morse Taper Drills & Shank Adapters.
Includes the following:
- 2x 1" diameter, 290mm long Morse Taper Drills with No.3 Shanks, both new unused with boxes.
- Sutton Tools Morse Taper No.3 to No.4 shank adapter, New unused in plastic wrapping and case.
- Ozar Morse Taper No.4 to No.5 Shank adapter, New unused, old plastic wrap removed for photos.
- 1x Morse Taper No.2 to No.3 Shank adapter, light usage.
- 2x Morse Taper No.1 to No.2 Shank Adapters, both light usage
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 103
- Bidders
- 7
$220
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref C152697
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Iscar 32x32x300mm Indexable Lathe Boring Bar
- Watchers
- 77
- Bidders
- 5
$220
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R151880
Iscar Indexable Lathe Boring Bar.
Part No. S32T CTFPR-16
32x32x300mm size.
Shows very minor signs of brief possible usage. Case exterior shows workshop storage wear.
See our other listings for another unit.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 112
- Bidders
- 12
$218
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref L152186
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Iscar 32x32x300mm Indexable Lathe Boring Bar
- Watchers
- 81
- Bidders
- 9
$213
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q151879
Iscar Indexable Lathe Boring Bar.
Part No. S32T CTFPR-16
32x32x300mm size.
Shows very minor signs of brief possible usage. Case exterior shows workshop storage wear.
See our other listings for another unit.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 100
- Bidders
- 8
$212.50
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M152187
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
4x Iscar Indexable Lathe Grooving Tools
- Watchers
- 47
- Bidders
- 7
$206.45
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S148709
4x Iscar Indexable Lathe Grooving Tools.
Includes:
HFHR-25-25-3T12
HFHR-25-48-3T22
HFHR-25-35-5T20
HFHR-25-95-5T32
Condition varies wirh each unit.
Steel Framed Stacking Pallet Stillage
- Watchers
- 43
- Bidders
- 8
$205
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U151831
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 146
- Bidders
- 9
$205
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O152189
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Assorted Iscar Lathe Tool Inserts
- Watchers
- 96
- Bidders
- 5
$205
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T152792
Assorted Lathe Tool Inserts.
All are Iscar branded.
See photos for details on type and part numbers.
Two packs are new and still sealed.
Unused leftover workshop parts stock. Cases show storage wear.
Steel Framed Stacking Pallet Stillage
- Watchers
- 26
- Bidders
- 5
$200
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X151834
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 35
- Bidders
- 8
$200
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref G151843
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 34
- Bidders
- 7
$200
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref C151839
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 20
- Bidders
- 5
$196
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V151832
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 23
- Bidders
- 2
$190
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A151837
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 30
- Bidders
- 5
$190
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref B151838
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Double Size Therapedic Medicoil HD Mattress with Base Frame
- Watchers
- 133
- Bidders
- 15
$189.50
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T147722
Double Therapedic Medicoil HD Mattress with Base Frame
Mattress approx 240mm thick.
Mattress and frame were previously used as display pieces in tiny home manufacturer's show homes. Some mild staining from floor dust on some ends of Mattress and base frame only. May have dust from our warehouse as well Small tears in fabric on bottom of base frame, see photo.
See our other listings for more of these bed sets
8x Assorted Trapazoidal Finishers
- Watchers
- 42
- Bidders
- 7
$186
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V152794
8x Assorted Trapazoidal Finishers.
All units are Cheboygan branded,:
- HSS 6035 TR20x3 H7, 395mm.length.
- HSSE 9208 M22x5 RH Finisher, 230mm length.
- 2x HSSE M18x6 Trapazoidal Finishers. 205mm lengths.
- 2x HSSE M18x6 RH Trapazoidal, 205mm lengths.
- 2x HSS 1084 5/8"-4 RH Stub Doubles, 230mm lengths.
All units show generally very light or possibly no usage. Cases show workshop storage wear. Two larger units without cases.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 102
- Bidders
- 10
$185
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U151909
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 95
- Bidders
- 13
$181
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref C151917
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 112
- Bidders
- 6
$177
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T152194
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
Note that bottom drawer stoppers are not functioning so Drawer will fall out if pulled outwards too far.
See our other listings for more of these sturdy work units.
3x Iscar Indexable Lathe Boring Bars, 32mm Diameters
- Watchers
- 73
- Bidders
- 7
$177
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R148708
3x Iscar Indexable Lathe Boring Bars.
Includes:
2x GHIR 32-4, both 250mm lengths.
1x GHIL-32C-610, 200mm.length.
All are 32mm diameter.
All show generally light use.
Taegu Tec 40x40x300mm Indexable Lathe Boring Bar
- Watchers
- 84
- Bidders
- 7
$176
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref P151878
Taegu Tec Indexable Lathe Boring Bar.
Part No. S40T-STFCR-16 (46522).
40x40x300mm in size.
Item appeared as new unused. Case exterior shows workshop storage wear.
2x Iscar Indexable Lathe Boring Bars, 20x20x200mm
- Watchers
- 116
- Bidders
- 7
$175
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H148724
2x Iscar Indexable Lathe Boring Bars.
Includes the following:
S20R STLCR-16
S20R CTFPR-16
Both are 200mm in length.
Both show no signs of usage. Case exteriors show workshop storage wear.
Steel Framed Stacking Pallet Stillage
- Watchers
- 12
- Bidders
- 4
$172
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref E151841
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 16
- Bidders
- 6
$171
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Z151836
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 26
- Bidders
- 5
$171
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref W151833
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 105
- Bidders
- 10
$170
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N152188
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 79
- Bidders
- 6
$165
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q152191
Steel Mobile Workbench Cabinet.
Manufactured by Maxim.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Assorted End Mills, Lathe Inserts, Drills, Taps, & More
- Watchers
- 90
- Bidders
- 8
$162.50
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A152799
Assorted End Mills, Lathe Inserts, Drills, Taps, & More.
A variety of units, see photos for further details on types, sizes, Brands, etc
Most appear unused. Cases show workshop storage wear.
2x ACME 1.25" x 5 Brass Rakes + 1x 27.5mm Longstar Ring
- Watchers
- 52
- Bidders
- 7
$162
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Z152798
Auction includes the following:
- 2x ACME 1.25" x 5 Brass Rakes, HSGT, 2G, 18159, 230mm total length.
- 1x 27.5mm Longstar Ring, L1536.
One Rake is missing its case.
All units show very minor marks from possible light use.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 80
- Bidders
- 8
$160
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T151908
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 78
- Bidders
- 8
$152.50
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R151932
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Assorted Automotive Electrical Shrink Tube, Fuses, Crimp Terminals
- Watchers
- 146
- Bidders
- 11
$152
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J144696
Assorted Automotive Electrical Shrink Tube, Fuses, Crimp Terminals.
Leftover workshop parts stock. Some units are dusty from open case storage.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 94
- Bidders
- 10
$152
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y151913
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 142
- Bidders
- 11
$152
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V151910
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Steel Mobile Workbench Cabinet by Maxim
- Watchers
- 169
- Bidders
- 7
$151
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref E152699
Steel Mobile Workbench Cabinet.
Maxim branded unit.
Sterl body and drawers with MDF board work surface.
Work surface approx 915mm above floor and approx 770x545mm in area.
On castors for mobility.
3x lower Tool drawers.
See photos for further design details.
See our other listings for more of these sturdy work units.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 89
- Bidders
- 10
$146
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K151925
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 154
- Bidders
- 8
$143
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref L151926
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 144
- Bidders
- 9
$141.50
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H151922
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 68
- Bidders
- 8
$137
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref P152762
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 101
- Bidders
- 12
$135
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M151901
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 137
- Bidders
- 8
$133
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref I151897
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Steel Framed Stacking Pallet Stillage
- Watchers
- 33
- Bidders
- 6
$132
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F151842
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 77
- Bidders
- 10
$127
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Z152746
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll well.
See our other listings for more of these Trolley bins.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 76
- Bidders
- 8
$126
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q151931
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 83
- Bidders
- 12
$125
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K151899
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 168
- Bidders
- 10
$124
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N151902
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 86
- Bidders
- 7
$123
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S151933
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 100
- Bidders
- 7
$122
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref G151921
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 91
- Bidders
- 8
$122
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref W151911
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 100
- Bidders
- 12
$122
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q151905
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 41
- Bidders
- 8
$122
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O152761
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 84
- Bidders
- 10
$121.10
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref E151919
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 64
- Bidders
- 7
$121
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M151927
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 82
- Bidders
- 8
$121
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J151924
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 82
- Bidders
- 6
$121
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F151920
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 72
- Bidders
- 12
$121
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X151912
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 101
- Bidders
- 6
$121
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S151907
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 84
- Bidders
- 9
$121
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O151903
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 42
- Bidders
- 7
$121
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y152745
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 36
- Bidders
- 8
$121
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref C152749
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll well.
See our other listings for more of these Trolley bins.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 70
- Bidders
- 9
$120
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N151928
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 74
- Bidders
- 10
$120
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref L152758
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
2x Iscar Indexable Lathe Turning Tools SCLCR 16x16mm
- Watchers
- 89
- Bidders
- 8
$116
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M148729
2x Iscar Indexable Lathe Turning Tools.
Invludes the following types:
SCLCR 1616H-11, as new unused
SCLCR 1616H-09, shows some minor usage and a chip out of its shank, see photos.
Both are 150mm total length.
Some wear to exterior casings from Workshop storage.
2x Indexable Lathe Boring Bars by Iscar and TaeguTec
- Watchers
- 77
- Bidders
- 6
$115
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U152741
2x Indexable Lathe Boring Bars by Iscar and TaeguTec.
Includes the following:
- Iscar A20Q SVUNR-12, with 180mm length.
- TaeguTec S16R-STFCL-11, with 200mm length.
Both appears as new unused. Both case exteriors show workshop storage wear.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 102
- Bidders
- 11
$113
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O151929
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 131
- Bidders
- 14
$112.55
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref P151930
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 56
- Bidders
- 9
$112.11
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A152747
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 165
- Bidders
- 10
$108
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Z151914
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Sandvik Coromant CoroCut QD Lathe Parting Blade QD-NN2J80C45A
- Watchers
- 53
- Bidders
- 4
$107.15
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref I152781
Sandvik Coromant CoroCut QD Lathe Parting Blade.
Part No. QD-NN2J80C45A
225x53x4mm.
Includes two types of spare Inserts:
- 1x insert QD-NJ-0500-0004-CL 1125
- 10x insert QD-NJ-0500-020E-NL H13A
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 135
- Bidders
- 10
$107
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J151898
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 80
- Bidders
- 7
$102
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref B152774
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
3x Assorted Reamer Bits
- Watchers
- 49
- Bidders
- 9
$102
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref W152795
3x Assorted Reamers.
Includes:
- Trubor HSS No.5 Finishing reamer, 155mm long reaming blades, up to 45mm max diameter, 28x28mm square mounting end, no case.
- Trucut HSS 20mm diameter rwamer with 70mm long head, 150mm max length, Morse Taper No.2 Shank, with case.
- Somta HSS 3/8" H7 reamer, 147mm total length, Morse Taper No.1 shank, wirh case.
All three units show very light marks or possible signs of prior usage. Causes show workshop storage wear.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 75
- Bidders
- 8
$101
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref D152750
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll well.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 73
- Bidders
- 6
$101
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref E152751
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll ok.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 47
- Bidders
- 9
$100.01
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y152771
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 45
- Bidders
- 6
$100
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H152754
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 45
- Bidders
- 7
$100
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K152757
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 52
- Bidders
- 7
$100
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S152765
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 42
- Bidders
- 8
$100
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V152768
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 47
- Bidders
- 9
$100
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A152773
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
5x Iscar Indexable Lathe Boring Bars, 32mm Diameters
- Watchers
- 55
- Bidders
- 7
$96
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref P148706
5x Iscar Indexable Lathe Boring Bars.
Includes:
3x GHIR 32-4, in lengths of 167mm,187mm, and 190mm.
2x GHIL-32C-610 in lengths of 138mm and 130mm.
All are 32mm diameter.
All have had their shanks cut shorter. Condition varies with each unit.
Steel Framed Stacking Pallet Stillage
- Watchers
- 25
- Bidders
- 7
$94
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref D151840
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Steel Framed Stacking Pallet Stillage
- Watchers
- 17
- Bidders
- 6
$91
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H151844
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
11x Assorted Lathe Indexable Grooving Bars
- Watchers
- 66
- Bidders
- 8
$89
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J151950
11x Assorted Lathe Indexable Grooving Bars.
Includes the following:
- 1x Combo Tools S16Q-SCLC-06 OVAB, 140mm length.
- 2x Iscar GEHIR 16-14-2-T2.6, 125mm lengths.
- 2x Iscar GEHIR 16-16-3-T3, 142mm & 100mm lengths.
- 4x Iscar GEHIR 20-3, Lengths of 190mm (2x), 140mm, and 130mm.
- 2x Iscar GEHIR 20-20-4, Lengths of 172mm and 125mm.
Condition varies with each item. Many have been modified in length and head diameter.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 46
- Bidders
- 8
$88.88
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M152759
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 62
- Bidders
- 7
$88
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F152752
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
2x Floating Reamers by David Brown
- Watchers
- 92
- Bidders
- 9
$88
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q151957
2x Floating Reamers.
Both manufactured in England by David Brown.
Small unit is Type No.SS2, 13.5-14.5mm, Morse Taper No.1 shank. This unit appears as new unused but without packaging.
Larger unit is Type No.S6, 28.6-31.8mm, Moses Taper No.2 shank. This unit shows wear and usage snd comes with its worn box.
Steel Framed Stacking Pallet Stillage
- Watchers
- 19
- Bidders
- 6
$87
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y151835
Steel Framed Stacking Pallet Stillage.
1415x1310x170mm wood pallet base.
40x40mm box steel frame up to 1570mm tall at top horizontal bar.
1670mm max height to top of corners
Inner dimensions within frame are approx 1265x1200x1400mm.
Base corners feature steel slots for other matching stillages to be set on top and locked into place.
Sturdy well built unit showing light use.
See our other listings for more of these units.
Photos may be indicative.
Teco 40x40x300 Indexable Lathe Boring Bar
- Watchers
- 82
- Bidders
- 8
$87
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O151877
Teco Indexable Lathe Boring Bar.
Part Number on packaging is HIR0040U22SP.
Total bar length is 300mm. Shank that mounta onto Lathe measures 40x40x150mm. The remaining Shank with Indexable Tip extends another 150mm and is 32x32mm diameter.
See photos for further design details.
Appears unused and as new. Case exterior shows workshop storage wear.
See our other listings for more of this item.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 84
- Bidders
- 8
$86
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T152766
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 171
- Bidders
- 7
$85
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R151906
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
Assorted Lathe Tool Inserts
- Watchers
- 105
- Bidders
- 11
$84.89
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q152789
Assorted Lathe Tool Inserts.
Brands include Iscar, Sandvik Coromsnt, Teco.
See photos for details on type and part numbers.
Two cases have no ID labels on them.
Unused leftover workshop parts stock. Cases show storage wear.
5x Iscar Indexable Lathe Grooving Tools, Modified Shanks
- Watchers
- 58
- Bidders
- 6
$82
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K148701
5x Iscar Indexable Lathe Grooving Tools.
Includes:
3x Part No. HFHR 25-75-5T14
1x Part No. HFHR 25-45-5T25
1x Part No. GHAR-25
All have had their lengths cut down to between appex 85mm to 115mm, see photos.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 43
- Bidders
- 8
$82
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J152756
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Iscar Indexable Lathe Grooving Tool HFHR-25-70-5T32
- Watchers
- 36
- Bidders
- 3
$81
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V151884
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-25-70-5T32
150mm length.
Appears as new unused. Case exterior shows workshop storage wear.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 62
- Bidders
- 9
$81
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref I152755
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 55
- Bidders
- 9
$81
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref D152776
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 3800mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
3x Iscar Heli-Grip Indexable Grooving Tool Holders.
- Watchers
- 59
- Bidders
- 8
$80
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref C151865
3x Iscar Heli-Grip Indexable Grooving Tool Holders.
All are Part No. HELIR 2525-4T25
140mm total length each.
Two units have had their front shanks modified to another angle, see photos.
See our other listings for more Lathe Tool Holders.
5x Iscar Indexable Lathe Grooving Tools, Modified Shanks
- Watchers
- 59
- Bidders
- 3
$80
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N148704
5x Iscar Indexable Lathe Grooving Tools.
Includes the following:
2x Part No. HFHR 25-75-5T14
2x Part No.HFHR 25-50-5
1x Part No.HFHR 25-75-5
All have had their lengths cut down to between appex 100mm to 112mm, see photos.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 43
- Bidders
- 5
$80
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N152760
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 53
- Bidders
- 9
$80
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref C152775
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 46
- Bidders
- 8
$79
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref B152748
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll well.
See our other listings for more of these Trolley bins.
9x Assorted Corner Rounding End Mills
- Watchers
- 109
- Bidders
- 8
$77.83
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y152797
9x Assorted Corner Rounding End Mills.
Includes:
- 2x Clarkson 2mm w/ 12mm diameter shank.
- 4x Clarkson 4mm w/ 12mm diameter shank.
- 1x Trubor 1/2" w/ 25mm diameter shank
- 2x Teco Tooling Part No.T0003A-3A5 AWF w/ 20mm diameter shank.
3x Iscar Indexable Grooving Tool Holders HFHR-25-55-5T25
- Watchers
- 58
- Bidders
- 7
$77
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref D151866
3x Iscar Indexable Grooving Tool Holders.
All are Part No. HFHR-25-55-5T25
150mm total length each.
See our other listings for more Lathe Tool Holders.
3x Indexable Grooving Tool Holders.
- Watchers
- 47
- Bidders
- 5
$77
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref E151867
3x Indexable Grooving Tool Holders.
Includes:
Iscar HFHR-25-48-3T22, 150mm length
Iscar HFHR-25-180-5T32, 150mm length.
Unknown manufacturer, type GHGR 25-4, 140mm length.
See our other listings for more Lathe Tool Holders.
Iscar Indexable Lathe Grooving Tool HFHR 25-25-5T10
- Watchers
- 57
- Bidders
- 5
$77
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref W151885
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR 25-25-5T10
150mm total length.
Appears as new unused. Case exterior shows some workshop storage wear.
See our other listings for more of these large tools.
Iscar Indexable Lathe Grooving Tool HFHR 25-130-5T32
- Watchers
- 38
- Bidders
- 4
$77
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Z151888
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR 25-130-5T32
150mm total length.
Appears as new unused. Case exterior shows some workshop storage wear.
See our other listings for more of these large tools.
2x Sandvik Coromant Indexable Boring Heads, 32mm diameter Mounts
- Watchers
- 37
- Bidders
- 3
$77
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref W152743
2x Sandvik Coromant Indexable Boring Heads.
Includes:
- L479.9-323422-16
- L479.0-323422-16
Both have 16mm diameter mounting bases
Both appear to be unused.
Plastic case exteriors Both shoe workshop storage wear.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 48
- Bidders
- 5
$77
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q152763
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 48
- Bidders
- 5
$77
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U152767
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
3x Iscar Indexable Grooving Tool Holders GHGR 25-3 & 25-4
- Watchers
- 57
- Bidders
- 5
$75
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S151855
3x Iscar Indexable Grooving Tool Holders.
Two units are Part No. GHGR 25-3
One unit is part No. GHGR 25-4
Two units are 140mm total length and one 25-3 had been cut 10mm shorter and has had a curved edge cut along its front edge, see photos.
See our other listings for more Lathe Tool Holders.
Teco 40x40x300 Indexable Lathe Boring Bar
- Watchers
- 62
- Bidders
- 4
$75
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N151876
Teco Indexable Lathe Boring Bar.
Part Number on packaging is HIR0040U22SP.
Total bar length is 300mm. Shank that mounta onto Lathe measures 40x40x150mm. The remaining Shank with Indexable Tip extends another 150mm and is 32x32mm diameter.
See photos for further design details.
Appears unused and as new. Case exterior shows workshop storage wear.
See our other listings for more of this item.
3x Sandvik Coromant Indexable Boring Heads, 25mm Dia Mounts
- Watchers
- 31
- Bidders
- 3
$75
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X152744
3x Sandvik Coromant Indexable Boring Heads.
Includes the following;
2x R479.9-25 28 18-11
1x L479.9-25 28 18-11
All heads have 25mm diameter mounting base.
All heads appear unused.
Plastic case exteriors show workshop storage wear.
3x Iscar Indexable Perpendicular Grooving Tool Holders
- Watchers
- 48
- Bidders
- 5
$73.30
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref G151869
3x Iscar Indexable Perpendicular Grooving Tool Holders.
All are Part No. GHMPR 25
135mm total length each.
See our other listings for more Lathe Tool Holders.
Sandvik Coromant Indexable Boring Head R474.9-50 50 36-12
- Watchers
- 31
- Bidders
- 4
$72.50
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V152742
Sandvik Coromant Indexable Boring Head.
Part No. R474.9-50 50 36-12
50mm diameter mounting base.
Appears unused.
Case exterior shows workshop storage wear.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 45
- Bidders
- 10
$72
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref G152753
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 43
- Bidders
- 7
$72
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Z152772
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
3x Iscar Lathe Parting Grooving Blades + Insert Extractor Tool
- Watchers
- 72
- Bidders
- 3
$71
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref L152784
3x Iscar Lathe Parting Grooving Blades + Insert Extractor Tool
Includes the following blades:
- 2x TangGrip TGFH 32-3
- 1x Jet-Cut TGFH 32C-3-JHP
Also includes Iscar insert Extractor Tool ETG 3-4-SH
All includes cases.
Item appear unused or very lightly used.
Case exteriors show workshop storage wear.
Fisher & Paykel Dish Washer on Cupboard
- Watchers
- 33
- Bidders
- 4
$70
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A139273
Fisher & Paykel Dish Washer on Cupboard.
2 Drawer Cupboard.
Cupboard is missing a leg.
Unknown Model Dish Washer.
Unit has smoke and water damage.
Unit has not been tested.
Heavy Duty Industrial Trolley Castors Wheel Set, 125mm Diameter
- Watchers
- 178
- Bidders
- 8
$68.56
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref D151918
Heavy Duty Industrial Trolley Castors Wheel Set.
125mm Diameter, 50mm wide wheels made from a dark red plastic-like material.
Two wheel Assemblies are swivel type with foot locks.
Two other Assemblies are non-swivel non-locking.
5mm thick steel Mounting plate on each is 110x95mm in size.
Items show generally light usage on wheel surfaces, see photos.
See photos for further design details.
See our other listings for more lots of this Trolley wheel.
Photos are indicative.
5x Iscar Indexable Lathe Grooving Tools HFHR 25-25-5T10, Modified
- Watchers
- 39
- Bidders
- 4
$68.15
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O148705
5x Iscar Indexable Lathe Grooving Tools.
All are Part No. HFHR 25-25-5T10.
All have had their lengths cut down to approx between 105mm and 115mm, see photos.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 45
- Bidders
- 8
$68
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R152764
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 790mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
Iscar Indexable Lathe Turning Tool SVJNL 2525M-12
- Watchers
- 49
- Bidders
- 4
$67
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref C151891
Iscar Indexable Lathe Turning Tool.
Part No. SVJNL 2525M-12
150mm total tool length.
Appears as new unused. Case exterior shows workshop storage wear.
2x Iscar Indexable Lathe Small Borng Bars
- Watchers
- 62
- Bidders
- 4
$66
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N152786
2x Iscar Indexable Lathe Small Borng Bars.
Includes:
- MIFHR 16C-10, with 90mm length.
- MIFHR 12C-8, with 104mm length.
Both as new unused with cases and torx driver tool. Case exteriors show workshop storage wear.
Milling Machine Head.
- Watchers
- 51
- Bidders
- 5
$65
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J148674
Milling Machine Head and Components.
Comes with Multiple gears and additional components.
Is not Assembled so Unknown if functional.
Condition is well used and as such has a lot of surface rust. appears to be made from either steel or iron
Iscar Indexable Lathe Grooving Tool GEHSR 25-2
- Watchers
- 29
- Bidders
- 4
$63
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref I148725
Iscar Indexable Grooving Tool.
Part No. GEHSR 25-2
120mm length.
Shows no signs of usage, appears as new.
Case exterior shows workshop storage wear.
5x Iscar Indexable Lathe Boring Bars, 32mm Diameters
- Watchers
- 46
- Bidders
- 6
$63
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Q148707
5x Iscar Indexable Lathe Boring Bars.
Includes:
3x GHIR 32-4, in lengths of 130mm, 124mm, 109mm.
2x GHIL-32C-610 in lengths of 148mm and 132mm.
All are 32mm diameter.
All have had their shanks cut shorter. Condition varies with each unit.
2x Heule Werkzeug AG Deburring Tools
- Watchers
- 46
- Bidders
- 5
$63
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X152796
2x Heule Werkzeug AG Deburring Tools.
Made in Switzerland
Includes:
- COFA 6/6.2, 100mm length, 6mm diameter.
- GH-S 4-10, 110mm total length, 6mm head diameter, 10mm mounting shank diameter.
Both units appear unused. Cases show workshop storage wear.
Iscar Indexable Lathe Turning Tool PCLNR 3232P-12
- Watchers
- 58
- Bidders
- 5
$61
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T151882
Iscar Indexable Lathe Turning Tool.
Part No.PCLNR 3232P-12.
170mm length.
See photos for included acccesories.
Appears as new unuaed. Case exterior shows some workshop storage wear.
9x Iscar Lathe Self Grip Parting Tool Blocks
- Watchers
- 47
- Bidders
- 5
$61
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H152780
9x Iscar Lathe Self Grip Parting Tool Blocks
Includes:
- 3x SGTBU 25-6G, all without top bracket attached, 110mm lengths
- 1x SGTBU 25-8M, without top bracket, 110mm length.
- 5x Iscar blocks that have been modified by being cut shorter at an angle, see photos. ID markings have been partually cut off as well. Only one has top bracket.
- 6x loose top Brackets, attachment screws not included.
Condition varies with each unit.
7x Iscar Lathe Parting Grooving Blades
- Watchers
- 67
- Bidders
- 8
$61
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K152783
7x Iscar Lathe Parting Grooving Blades.
Includes:
- 4x SGFFH 150R-5
- 3x SGFFH 150L-5
All includes cases.
All appear unused.
Case exteriors show workshop storage wear.
7x Indexable Lathe Grooving Bars, Modified Lengths
- Watchers
- 48
- Bidders
- 6
$58
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref I151949
7x Indexable Lathe Grooving Bars.
Includes:
-5x Iscar GHIR 25-25-4 unmodified lengths of 110mm, 150mm, 170mm, 200mm (2x). Some have had their heads ground narrower as well.
- 2x other units with similar but slightly larger insert slots, both have had their ID markings worn off or cut off from shortening.
All units show industrial wear and usage
2x Bowers Sylvac 3-Point Inside Digital Micrometers, Faulty
- Watchers
- 50
- Bidders
- 3
$56
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F144067
2x Bowers Sylvac 3-Point Inside Digital Micrometers.
Includes:
- Model No.BSU1, 19-51, with 25-37 attachment, no batteries, LCD Display is all blackened, see photos, no case or accessories.
- Model No.BSU400, 10-19, with case and some accesories, no batteries, LCD Display partualy blackened.
Condition - Both have Faulty displays (see above). One unit has detached adjustment dial that won't screw back on. Sone original accessories are missing from case.
2 x Lounge Tables
- Watchers
- 65
- Bidders
- 11
$56
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M148521
2 x Lounge tables.
1 Table is 450mm x 450mm x 650mm
1 Table is 400mm x 400mm x 585mm
Both tables have Rustic Wooden Tops with Dark Grey frames.
Manufacturer Unknown
Wood Unknown.
Iscar Indexable Lathe Grooving Tool HFHR-20-45-5T25
- Watchers
- 34
- Bidders
- 3
$56
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V151936
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-20-45-5T25.
140mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
Iscar Indexable Lathe Turning Tool Pentacut PCHR 25-24
- Watchers
- 54
- Bidders
- 2
$55
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref L148728
Iscar Indexable Lathe Turning Tool.
Part No. Pentacut PCHR 25-24.
132mm Tool length.
Shows light usage Case shows workshop storage wear
3x Iscar Indexable Grooving Tool Holders GHGL 25-3
- Watchers
- 35
- Bidders
- 3
$54
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U151857
3x Iscar Indexable Grooving Tool Holders.
All are Part No. GHGL 25-3
140mm total length each.
See our other listings for more Lathe Tool Holders.
Iscar Indexable Lathe Turning Tool SVJNL 2525M-12
- Watchers
- 49
- Bidders
- 6
$54
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref D151892
Iscar Indexable Lathe Turning Tool.
Part No. SVJNL 2525M-12
150mm total tool length.
Appears as new unused. Case exterior shows workshop storage wear.
Iscar Indexable Lathe Grooving Tool HFHR-25-75-3T25
- Watchers
- 45
- Bidders
- 4
$54
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O148731
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-25-75-3T25.
150mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
Assorted Drill & Milling Tip Inserts
- Watchers
- 35
- Bidders
- 5
$54
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref P152788
Assorted Drill & Milling Tip Inserts.
Brands include Seco, Iscar, Allied Machine.
See photos for details on part numbers and types included.
All appear to be as new unused workshop parts stock. Cases show storage wear.
Heavy Duty Steel Scrap Material Bin Trolley
- Watchers
- 75
- Bidders
- 5
$53
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X152770
Heavy Duty Steel Scrap Material Bin Trolley.
Sturdy Steel construction with 150mm diameter heavy Duty castors.
Inner bin dimensions are approx 845x610mm and 490mm deep.
Top rim of bin approx 890mm above floor.
Forklift slots at bottom.
Trolley shows typical industrial usage and wear but is still very sturdy. Castors roll OK.
See our other listings for more of these Trolley bins.
4x Iscar Lathe Self Grip Parting Tool Blocks
- Watchers
- 40
- Bidders
- 5
$53
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref G152779
4x Iscar Lathe Self Grip Parting Tool Blocks
Includes:
- 1x SGTBU 32-6G
- 1x SGTBU 20-6G (missing some screws for top bracket).
- qx TangGrip??? Unable to decipher further its part number.
- 1x SGTBU 25-6G (has been cut down to 85mm length).
Three units are 110mm length.
Condition varies with each unit.
Assorted Lathe Tooling Accessories
- Watchers
- 48
- Bidders
- 4
$52
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U151961
Assorted Lathe and mill Tooling Accessories.
Mixed Lot of various Lathe and Milling items and parts.
See photos for further details on included items.
Condition varies with each item.
Iscar Indexable Lathe Grooving Tool HFHR 25-25-5T10
- Watchers
- 41
- Bidders
- 6
$51
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X151886
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR 25-25-5T10
150mm total length.
Appears as new unused. Case exterior shows some workshop storage wear.
See our other listings for more of these large tools.
Iscar Indexable Lathe Grooving Tool HFHR-20-48-3T12
- Watchers
- 42
- Bidders
- 6
$51
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T151934
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-20-48-3T12.
140mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
5x Iscar Lathe Self Grip Parting Tool Blocks
- Watchers
- 46
- Bidders
- 4
$51
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref E152777
5x Iscar Lathe Self Grip Parting Tool Blocks
All are Part No.SGTBU 25-6G.
Adjustable top clamp Part No. BKU 110.
110mm block lengths.
5x units in auction
Condition varies with each unit.
4x Milling Lathe Chucks
- Watchers
- 30
- Bidders
- 3
$51
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K151951
4x Milling Lathe Chucks.
No visible manufacturer or model ID on units.
50mm diameter threaded tool inset ends.
40mm diameter, 65mm long mounting shanks.
85mm total diameter.
See photos for further type details.
Assorted Lathe Indexable Grooving Parting Blades & Adapters
- Watchers
- 56
- Bidders
- 5
$50
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref V151962
Assorted Lathe Indexable Grooving Parting Blades & Adapters.
One Bohlerit and one Kennametal branded blade. All other items appear to be Iscar branded.
See photos for details on part numbers.
Condition varies wirh each unit.
3x Iscar Indexable Grooving Tool Holders GHGR 25-4
- Watchers
- 59
- Bidders
- 6
$48.50
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T151856
3x Iscar Indexable Grooving Tool Holders.
All are Part No. GHGR 25-4
140mm total length each.
See our other listings for more Lathe Tool Holders.
Iscar Indexable Lathe Grooving Tool HFHR-25-35-5T20
- Watchers
- 36
- Bidders
- 3
$48
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Z151940
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-25-35-5T20.
150mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
Iscar Indexable Lathe Grooving Tool HFHR-20-48-3T12
- Watchers
- 38
- Bidders
- 6
$47
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U151935
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-20-48-3T12.
140mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
Iscar Indexable Grooving Tool HFHR-25-75-3T25
- Watchers
- 39
- Bidders
- 3
$45.15
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J148726
Iscar Indexable Grooving Tool.
Part No. HFHR-25-75-3T25.
150mm length.
Shows no signs of usage, appears as new.
Case exterior shows workshop storage wear.
Iscar Indexable Lathe Turning Tool SLANR 2525M-11 TANG
- Watchers
- 34
- Bidders
- 3
$45
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F148722
Iscar Indexable Lathe Turning Tool.
Part No. SLANR 2525M-11 TANG.
150mm Tool length.
Shows very light use. Case exterior shows workshop storage wear.
4x Iscar Indexable Grooving Tool Holders GHAR-25 & GHAL-25
- Watchers
- 48
- Bidders
- 4
$44
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K151873
4x Iscar Indexable Grooving Tool Holders.
Two are Part No. GHAR-25 and two others are Part No. GHAL-25.
130mm total length each excluding tip attachment.
See our other listings for more Lathe Tool Holders.
Iscar Indexable Lathe Turning Tool SVJNL 2525M-12
- Watchers
- 45
- Bidders
- 5
$44
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref E151893
Iscar Indexable Lathe Turning Tool.
Part No. SVJNL 2525M-12
150mm total tool length.
Appears as new unused. Case exterior shows workshop storage wear.
Iscar Lathe Tool Holder SGTBF 25-A for Parting & Grooving Blades
- Watchers
- 33
- Bidders
- 1
$43.54
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A148717
Iscar Lathe Tool Holder SGTBF 25-A for Parting & Grooving Blades.
85mm shank length.
As new unused. Case shows workshop storage wear.
Iscar Indexable Lathe Turning Tool PCLNR 3232P-12
- Watchers
- 56
- Bidders
- 6
$43
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S151881
Iscar Indexable Lathe Turning Tool.
Part No.PCLNR 3232P-12.
170mm length.
See photos for included acccesories.
Shows very few minor signs of use. Case exterior shows some workshop storage wear.
4x Sandvik Coromant Steel Blanks w/ CoroTurn SL Couplings
- Watchers
- 12
- Bidders
- 2
$43
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref W151963
4x Sandvik Coromant Steel Blanks w/ CoroTurn SL Couplings.
Includes:
- 2x R570-252517B
- 2x R570-202517B
Three units show light usage, one unit appears unused.
Iscar JetHPLine Lathe Self Grip Parting Grooving Tool Block
- Watchers
- 40
- Bidders
- 4
$42.50
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y148715
Iscar JetHPLine Lathe Self Grip Parting Grooving Tool Block.
Part No. GTBTU-25-6G-JHP
110mm total block length.
Shows very light marks indicating its been mounted but no signs of lubricant being injected Trough Tool nor other usage marks, see photos.
Sandvik Coromant Indexable Lathe Turning Tool R166.4FG-2525-22
- Watchers
- 39
- Bidders
- 3
$42.15
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref B148718
Sandvik Coromant Indexable Lathe Turning Tool.
Part No. R166.4FG-2525-22.
148mm total length.
As new unused. Case exterior shows workshop storage wear.
Iscar Indexable Lathe Grooving Tool HFHR-20-45-5T25
- Watchers
- 59
- Bidders
- 2
$42
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref W151937
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-20-45-5T25.
140mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
Iscar Indexable Lathe Grooving Tool HFHR-25-75-3T25
- Watchers
- 41
- Bidders
- 3
$41.50
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref U151883
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-25-75-3T25
150mm length.
Appears as new unused. Case exterior shows workshop storage wear.
4x Iscar Indexable Grooving Tool Holders GHAR-25
- Watchers
- 31
- Bidders
- 4
$41.45
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref J151872
4x Iscar Indexable Grooving Tool Holders.
All are Part No. GHAR-25
130mm total length each excluding tip attachment.
See our other listings for more Lathe Tool Holders.
Iscar Indexable Lathe Grooving Tool HFHR 25-180-5T32
- Watchers
- 28
- Bidders
- 1
$38
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y151887
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR 25-180-5T32
150mm total length.
Appears as new unused. Case exterior shows some workshop storage wear.
See our other listings for more of these large tools.
Iscar Indexable Lathe Grooving Tool HELIR 2525-4T12
- Watchers
- 36
- Bidders
- 3
$38
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref G151895
Iscar Indexable Lathe Grooving Tool.
Part No. Heli-Grip HELIR 2525-4T12
135mm total tool length.
Appears as new unused. Case exterior shows workshop storage wear.
Iscar Indexable Lathe Grooving Tool HFHR-25-180-5T32
- Watchers
- 32
- Bidders
- 3
$38
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N148730
Iscar Indexable Lathe Grooving Tool.
Part No. HFHR-25-180-5T32.
150mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
4x Iscar Indexable Lathe Turning & Grooving Tools
- Watchers
- 55
- Bidders
- 4
$38
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref T148710
4x Iscar Indexable Lathe Turning & Grooving Tools.
Includes:
3x Heli-Grip HELIR 2525-4T25
1x PentaCut PCHR 25-34
Condition varies wirh each unit.
3x Iscar Indexable Grooving Tool Holders GHGR 25-3
- Watchers
- 35
- Bidders
- 3
$37.01
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R151854
3x Iscar Indexable Grooving Tool Holders.
All are Part No. GHGR 25-3
140mm total length each.
See our other listings for more Lathe Tool Holders.
3x Iscar Indexable Perpendicular Grooving Tool Holders
- Watchers
- 32
- Bidders
- 3
$37
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F151868
3x Iscar Indexable Perpendicular Grooving Tool Holders.
All are Part No. GHMPR 25
135mm total length each.
See our other listings for more Lathe Tool Holders.
Iscar Indexable Lathe Grooving Tool DO-GRIP DGTL 16B-2D32
- Watchers
- 44
- Bidders
- 3
$36
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref X151938
Iscar Indexable Lathe Grooving Tool.
Part No. DO-GRIP DGTL 16B-2D32
140mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
Iscar Indexable Lathe Grooving Tool DO-GRIP DGTL 16B-2D32
- Watchers
- 34
- Bidders
- 2
$36
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y151939
Iscar Indexable Lathe Grooving Tool.
Part No. DO-GRIP DGTL 16B-2D32
140mm total length.
As new unused. Some wear to exterior casing from Workshop storage.
5x Iscar Lathe Self Grip Parting Tool Blocks
- Watchers
- 37
- Bidders
- 3
$35.50
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F152778
5x Iscar Lathe Self Grip Parting Tool Blocks.
Includes:
- 1x SGTBU 32-8M
- 3x SGTBU 25-8M
- 1x SGTBU 25-8 (has been ground down on backside, see photos).
110mm block lengths.
Condition varies with each unit.
Lathe Turning & Grooving Tools
- Watchers
- 39
- Bidders
- 4
$33
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref R151958
Lathe Turning & Grooving Tools.
Includes:
- Iscar HFHR 25-30-3T12, reduced shank length to 100mm, with Allen key and case and spare insert.
- Iscar 25-25M-12mm tool, 110mm length, with removable end Cutter attachment of unknown type, see photos. Stored in a Dormer branded case.
Both tools show generally light usage.
4x Assorted Mill Cutters, Blades
- Watchers
- 43
- Bidders
- 5
$30.58
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref Y151965
4x Assorted Mill Cutters, Blades.
Includes:
- 2x Somta gear cutting blades type 3x1/4x1, 20/04, HSS-Co5, 78mm diameter.
- 1x Trubor gear cutting blade type 20DP, 1, 20PA, No1 135/Rack, 56mm diameter.
- 1x Trubor Keyset Cutter type 535A, 35.5x6, HSS, shank is 70mm long, 12mm diameter. This unit includes plastic case.
Items shoe very light marks, some may be unused.
Iscar Indexable Lathe Grooving Tool DO-GRIP DGTL 16B-2D32
- Watchers
- 56
- Bidders
- 2
$30.50
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref D148720
Iscar Indexable Lathe Grooving Tool.
Part No. DO-GRIP DGTL 16B-2D32
140mm Tool length.
Shows no obvious signs of prior usage. Case exterior shows workshop storage wear.
Iscar Indexable Lathe Perpendicular Grooving Tool GHMPR-25
- Watchers
- 49
- Bidders
- 3
$28
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref A151889
Iscar Indexable Lathe Perpendicular Grooving Tool.
Part No. GHMPR-25
135mm length.
Appears as new unused. Case exterior shows some workshop storage wear.
See our other listings for more of these large tools.
Iscar Indexable Lathe Perpendicular Grooving Tool GHMPL-25
- Watchers
- 35
- Bidders
- 3
$24
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H151896
Iscar Indexable Lathe Perpendicular Grooving Tool.
Part No. GHMPL-25
135mm total tool length.
Appears as new unused. Case exterior shows workshop storage wear.
10x Milling Lathe Chucks
- Watchers
- 25
- Bidders
- 2
$22.60
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref L151952
10x Milling Lathe Chucks.
Unknown manufacturer, no ID markings on units.
Two different heights of Chuck, 8x at 50mm and 2x at 35mm.
100mm diameter chuck heads.
50mm wide Tool slots.
Mounting shanks are 40mm diameter, 65mm long.
See photos for further design details.
Iscar Indexable Perpendicular Grooving Tool GHMPL-25
- Watchers
- 24
- Bidders
- 5
$22
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref K148727
Iscar Indexable Perpendicular Grooving Tool.
Part No. GHMPL-25.
135mm Tool length.
As new unused. Case exterior shows workshop storage wear.
5x Milling Lathe Chucks
- Watchers
- 29
- Bidders
- 2
$22
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O151955
5x Milling Lathe Chucks.
All Okuma branded
2x 40#4
2x 40#6
1x 40#2
All units have 85mm diameter chuck heads, 43mm diameter centre tool holes,, Mounting shanks are 40mm diameter, 65mm long.
See photos for further design details.
Leather Top Desk
- Watchers
- 5
- Bidders
- 1
$20
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref I148153
This is a leather topped desk it has 4 Castor Wheels attached to a steel frame which the leather wrapped wooden table top sits upon.
Condition is okay, needs cleaning with leather cleaner and oil.
Iscar Indexable Lathe Grooving Tool HELIR 2525-4T12
- Watchers
- 43
- Bidders
- 4
$13.50
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F151894
Iscar Indexable Lathe Grooving Tool.
Part No. Heli-Grip HELIR 2525-4T12
135mm total tool length.
Appears as new unused. Case exterior shows workshop storage wear.
Iscar Indexable Lathe Perpendicular Grooving Tool GHMPR-25
- Watchers
- 39
- Bidders
- 3
$12.50
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref B151890
Iscar Indexable Lathe Perpendicular Grooving Tool.
Part No. GHMPR-25
135mm length.
Appears as new unused. Case exterior shows some workshop storage wear.
See our other listings for more of these large tools.
4x Iscar Indexable Grooving Tool Holders GHAR-25
- Watchers
- 44
- Bidders
- 2
$11.50
Sold 23/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref H151870
4x Iscar Indexable Grooving Tool Holders.
All are Part No. GHAR-25
130mm total length each excluding tip attachment.
See our other listings for more Lathe Tool Holders.
4x Iscar Indexable Grooving Tool Holders GHAR-25
- Watchers
- 39
- Bidders
- 2
$11.50
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref I151871
4x Iscar Indexable Grooving Tool Holders.
All are Part No. GHAR-25
130mm total length each excluding tip attachment.
See our other listings for more Lathe Tool Holders.
2x Padded Dinning Chairs
- Watchers
- 15
- Bidders
- 2
$2
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O148107
2x Padded Dinning Chairs.
Unknown manufacturer and model.
Padded seat snd back in grey fabric.
Seat width 450mm.
Back height 870mm.
Condition - Both chairs were new display pieces in sample tiny home but show fabric staining from Workshop handling, etc. May benefit from a fabric claen.. End cap missing off a metal leg.
6x Milling Lathe Chucks
- Watchers
- 21
- Bidders
- 1
$1.50
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M151953
6x Milling Lathe Chucks.
Unknown manufacturer, no ID markings on units.
Three different ttpes of Chuck:
- 3x 73mm long, 100mm diameter heads
- 2x 48mm long, 110mm diameter heads.
- 1x 33mm long, 110mm diameter head.
All units have 100mm diameter chuck heads, 50mm wide Tool slots, Mounting shanks are 40mm diameter, 65mm long.
See photos for further design details.
6x Milling Lathe Chucks
- Watchers
- 20
- Bidders
- 1
$1.50
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref N151954
6x Milling Lathe Chucks.
Four marked as Okuma branded and marked as 40#2, 40#8, 40#10, 40#13.
All units have 85mm diameter chuck heads, 43mm diameter centre tool holes,, Mounting shanks are 40mm diameter, 65mm long.
See photos for further design details.
Custom Display Rack, Incomplete
- Watchers
- 3
- Bidders
- 0
$1
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref M139753
Custom Display Rack, Incomplete.
Plywood board 260mm above floor.
Adjustable shelf support Brackets 245mm long. Some have missing or damaged rubber shelf pads.
Glass shelves are missing.
Custom built unit.
See photos for further design details
Unit will be disassembled on buyer pickup.
Modern Office Reception Desk
- Watchers
- 11
- Bidders
- 0
$1
Sold 24/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref O148783
Modern Office Reception Desk.
Customer front top surface 885mm high, back receptionist top surface 700mm high.
Two small storage cabinets built in underneath.
Top raised se tion is removable only, the rest of the desk is all one pice that does not dissemble and is very heavy.
Buyer needs to bring extra hands to assist loading this unit as it's design will not allow forklift use
See our other listing for a matching second deak.
3x Black, White, Pink, Padded Chairs
- Watchers
- 10
- Bidders
- 0
$1
Sold 25/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref F148774
3x Black, White, Pink, Padded Chairs.
Wood frames painted in white
Black soft padded fabric seat and backs.
Pink trim around backs.
Each chair measures approx 605mm outer width, 480mm inner width, 795mm back height, 470mm seat height.
Some finish wear on armrests, see photos, otherwise generally mild usage marks.
5x Sandvik Coromant Lock Arms 470-823
- Watchers
- 16
- Bidders
- 0
$1
Sold 22/04/2024
- SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTION
Skylarc Ref S151959
5x Sandvik Coromant Lock Arms.
All are Part No. 470-823
53mm long, 18mm diameter.
All as new unused leftover workshop parts stock. Packaging shows workshop storage wear.
