SKYLARC'S AUCKLAND ENGINEERING AUCTION
Auction finished on Sunday the 6th of April 2025
Okuma CNC Lathe
- Watchers
- 249
- Bidders
- 12
$16,650
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref X165780
Model: Okuma Space Turn LB300-M
11kW main spindle motor
4500rpm spindle speed
Max turning diameter 370mm
Max turning length 520mm
X axis travel 500mm
Z axis travel 260mm
70mm spindle bore (capped)
12 tool holders
Live tooling
250mm three jaw chuck
Okuma OSP-E100L CNC controller
Wide range of chuck jaws
You will need to organize your own lifting equipment and decommissioning for this machine
Battery has been changed but alarm not reset
Owner has had from new
To see this machine running:
https://youtu.be/kgwCjPghTaM
| Length | 3400mm |
|---|---|
| Width | 1900mm |
| Height | 1980mm |
Okuma LB25 CNC Lathe
- Watchers
- 133
- Bidders
- 8
$6,225
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref V165778
Model: Okuma LB25
Turning diameter 340mm
Turning length 600mm
Spindle bore 65mm
Max turning speed 2500rpm
Okuma OSP500L-G CNC controller
12 tool holders
250mm three jaw chuck
Large numbers of chuck jaws
Believed to be manufactured 1993
Has an oil leak
Buyer will need their own lifting equipment and decommissioning for this machine
To see this machine running:
https://youtu.be/zE6qucn97Dk
| Length | 4650mm |
|---|---|
| Width | 1950mm |
| Height | 2050mm |
TOS Three Phase Lathe
- Watchers
- 208
- Bidders
- 8
$4,010
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref T165750
Model: TOS Trencin SN40C
Distance between centres 1000mm
Swing over bed 400mm
Swing over gap 600mm
48mm spindle bore
20 spindle speeds
22.4 - 2000 rpm
Metric and imperial thread cutting
2 x three jaw 250mm chucks
Four jaw 310mm chuck
Range of tooling
Bench
To see this machine running:
https://youtu.be/UZYN-H012gU
| Length | 2500mm |
|---|---|
| Width | 840mm |
| Height | 1450mm |
Stanko Heavy Duty Lathe
- Watchers
- 141
- Bidders
- 8
$2,500
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref Z165730
Model: Stankoimport 1M69
3.5 metre bed
Approx 3 metres between centers
70mm spindle bore
660mm swing over bed
920mm swing over gap
18 spindle speeds
10 - 1250rpm
Metric and imperial thread cutting
505mm four jaw chuck
320mm three jaw chuck
670mm faceplate
2 x fixed steadies
Traveling steady
Some tooling
Rapid traverse not working
Runs good, a heavy duty machine for the big stuff
Buyer will need their own lifting equipment to move this machine
This machine can be collected in late April at the buyers discretion to simplify access.
To see this machine running:
https://youtu.be/DRHWmB-G0vg
| Length | 4860mm |
|---|---|
| Width | 1500mm |
| Height | 1300mm |
Hydraulic Workshop Press
- Watchers
- 209
- Bidders
- 15
$2,113
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref F165736
Three phase hydraulic power pack
880mm between uprights
900mm long hydraulic ram
Capacity unknown
Manually adjusted table height
Some accessories
Oil leak in top of ram
To see this machine running:
https://youtu.be/x-eM85t8Nng
| Length | 920mm |
|---|---|
| Width | 1650mm |
| Height | 2750mm |
20' Container and Some Contents
- Watchers
- 54
- Bidders
- 7
$1,510
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref H165192
20" container
Has roof
Some rust in doors
Contents includes plastic lengths and stainless lengths in roof storage
Other contents and shelving not included
Doors are very stiff
Container can be collected on the week of 14th of April
| Length | 6100mm |
|---|---|
| Width | 2440mm |
| Height | 2590mm |
Stanko Radial Arm Drill
- Watchers
- 125
- Bidders
- 8
$950
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref A165757
Model: Stankoimport 2E52 Radial Arm Drill
8 spindle speeds
56 - 1400rpm
Three phase
Manufactured 1974
Approx 110mm spindle travel
Three feed rates 0.1, 0.15, 0.2 mm per revolution
Includes wide range of accessories
Mill vice
Angle plates
Tapping chuck
Assorted chucks
Taper adapters
Lock down bolts
Drill bits
Tidy heavy duty machine that doesn't take up half the workshop
To see this machine running:
https://youtu.be/1cvZ91fnp1M
| Length | 1740mm |
|---|---|
| Width | 670mm |
| Height | 2310mm |
Steel Rack and Contents
- Watchers
- 140
- Bidders
- 12
$765
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref W165181
2790mm x 750mn x 2300mm tall steel rack
Large assortment of steel
Plate lengths
Square bar
Pipe including stainless
Includes large pipe in corner
Buyer will need to bring labor to unload
Contents of Shed
- Watchers
- 108
- Bidders
- 11
$615
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref I165167
Contents of shed
Includes
3 phase motors with reduction boxes
Large boxes of medicine chain
Terracotta tiles
Large angle plate
Chain gears
Reduction box housings
Auger spirals
Buyer will need some labour to load however some forklift assistance will be available
Steel Rack and Contents
- Watchers
- 145
- Bidders
- 12
$510
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref V165180
4100mm x 850mm x 1690mm tall double sided steel rack
Contents include
Angle steel
Assorted stainless and steel pipe
Stainless box section
Round bar
Buyer will need to bring labor to unload
Marquip Air Compressor
- Watchers
- 96
- Bidders
- 6
$330
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref C165187
Marquip ASME VIII DIV1
155 litre tank
Three cylinder belt drive
5.5kW motor
Located on the grass and may not be forklift accessible
Will be electrically decommissioned but buyer will need to do all other decommissioning
| Length | 1300mm |
|---|---|
| Width | 640mm |
| Height | 1000mm |
Tanner Three Phase Drill Press
- Watchers
- 63
- Bidders
- 5
$285
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref G165737
Tanner drill press
Has been converted to three phase
Roroll type plug
310mm x 270mm cast table
100mm spindle travel
Morse taper No.2
4 speed belt drive
| Length | 540mm |
|---|---|
| Width | 360mm |
| Height | 1830mm |
Vintage Solid Timber Workbench
- Watchers
- 16
- Bidders
- 2
$35.01
Sold 06/04/2025
- SKYLARC'S AUCKLAND ENGINEERING AUCTION
Skylarc Ref K165741
Solid timber workbench
Has a sheet of particle board over top that needs removing
Work top height 910mm
900mm x 490mm x 610mm tall cupboard
Heater mounted underneath
| Length | 2000mm |
|---|---|
| Width | 750mm |
| Height | 1580mm |
