SKYLARC'S AUCKLAND ENGINEERING AUCTION

Laguna Three Phase Milling Machine

Skylarc Ref K167327

Lagun FTV-1S turret milling machine
Table size 1120mm x 250mm
NT40 spindle taper
Power feed on X and Y axes
Millvision digital readout (DRO) system installed
115 - 3250 rpm spindle speed
Two speed ranges
Fitted machine vice included 150mm
Vertical spindle with manual fine feed
Spindle speed control on head
Emergency stop and multiple start/stop buttons on control panel
Coolant trough/base tray
Guarding fitted for operator safety
3-phase 2.2kW motor
20 amp plug
Condition consistent with workshop use

To see this machine running:
https://youtu.be/TiNLTeKkBeM

Bipel 80 Ton NC Hydraulic Press

Skylarc Ref P168268

Bipel hydraulic press with vertical orientation.
Control panel with touchscreen interface and push button controls.
Emergency stop control present on separate Siemens station.
Temperature controller for upper and lower die with Omron ESC5Z digital displays.
Powered hydraulic system with external oil reservoir and pump unit.
Safety enclosure with transparent door.
Electrical safety key switch on control panel.
Hydraulic connections visible on press assembly.
Model and rated capacity not identified.

TOS Three Phase Lathe

Skylarc Ref R167386

TOS Trencin SN40C centre lathe
Distance between centres 1000mm
Swing over bed 400mm, swing over gap 600mm
48mm spindle bore
20 spindle speeds, 22.4–2000 rpm
Metric and imperial thread cutting capability
200mm three jaw chuck
Two 250mm four jaw chucks
350mm four jaw chuck
250mm Burnerd 6 jaw chuck
405mm faceplate
Robust manual toolpost and tailstock
Original operation, maintenance, and instruction manual included
Manufactured in Czechoslovakia, net weight 1620kg
All chucks and faceplate shown included

To see this machine running:
https://youtu.be/87AxowlFRgs

TOS Three Phase Lathe

Skylarc Ref L167328

TOS Trencin SN40C centre lathe
Distance between centres 1000mm
Swing over bed 400mm, swing over gap 600mm
48mm spindle bore
20 spindle speeds, 22.4–2000 rpm
Metric and imperial thread cutting capability
200mm three jaw chuck
Traveling steady
Manufactured in Czechoslovakia, net weight 1620kg

DYE Metal Cutting Guillotine

Skylarc Ref J167352

Dye Industries NZ hydraulic guillotine.
Model: 2.5 x 5 MS
Cutting width: 2300mm
Maximum thickness capacity: Mild steel 3.0mm, stainless steel 2.0mm, aluminium 5.0mm
Electric back gauge
Robust steel construction, made in New Zealand
Electric motor drive system
Serial No: 1580/90
Blades look in good condition
Suitable for sheet metal and fabrication applications

Pacific Three Phase Milling Machine

Skylarc Ref X167392

Universal milling machine with vertical and horizontal NT40 spindles
Table size 1250mm x 280mm
Longitudinal travel 850mm, cross travel 290mm, vertical travel 475mm
Spindle speeds: 35–1800 RPM, variable in 2 ranges (35–250 / 250–1800)
5.5kW motor, 220/380/415V, 50Hz
Power feeds on X and Z axes
Universal milling head with integrated safety guard
Digital speed displays for vertical and horizontal spindle
Includes 2 horizontal arbor supports (no arbor included)
Approximate weight 1.8 tons

To see this machine running:
https://youtu.be/pxt-hRTKYRE

TOS Three Phase Milling Machine

Skylarc Ref V167390

Made in Czechoslovakia by TOS Olomouc
1370mm x 300mm T-slot table for versatile workholding
Table, knee, and head have mechanical and manual controls
Spindle speed dial with clearly marked ranges 45 rpm up to 1400 rpm
Fitted with vertical head and NT40 spindle taper (ER collet style visible)
Safety spindle guard fitted to the front
Electric control panel with start/stop and feed direction control
Worklamp attached for operator convenience
Robust cast iron construction for stability
Power feeds not working, motor runs but need doesn't move, manual feed works fine.
Rear panel removed

To see this machine running:
https://youtu.be/wMqKWJPd1Ws

Fexac Three Phase Milling Machine

Skylarc Ref X167366

FEXAC Universal Milling Machine
Table size 1100 x 240mm, 3 T-slots (14mm wide, 60mm spacing)
NT40/ISO40 spindle taper, 12 spindle speeds, 48–1500 RPM range
X axis travel 825mm (automatic), Y axis 250mm (automatic), Z axis 425mm (automatic), 0–425mm max/min spindle distance to table
Sony 2-axis digital readout (DRO) system installed
Includes horizontal arbor and 2 horizontal arbor supports as shown
Power feed on X axis, rapid traverse currently stuck on, 12 feed rates
Perspex safety guarding
Operating buttons for rapid/normal/feed

To see this machine running:
https://youtu.be/SgG4J8bzQJk

TOS Three Phase Milling Machine

Skylarc Ref L167354

Made in Czechoslovakia by TOS Olomouc
1370mm x 300mm T-slot table for versatile workholding
Table, knee, and head have mechanical and manual controls
Spindle speed dial with clearly marked ranges 45 rpm up to 1400 rpm
Fitted with vertical head and NT40 spindle taper (ER collet style visible)
Safety spindle guard fitted to the front
Electric control panel with start/stop and feed direction control
Work lamp
Robust cast iron construction for stability
Table power feed doesn't go down
Previously used for friction steel welding

See this running:
https://youtu.be/mW0c5Xp4WV8

Peddinghaus Punch and Shear

Skylarc Ref A167395

Peddinghaus Peddiworker 400 ironworker.
Three phase power supply.
Footswitch control.
Equipped with shearing, punching, and notching stations.
Shearing capacity: 1/2 inch plate, 4 x 9/16 inch, and 6 x 3/8 inch.
Angle iron cutting at 90 degrees: 3 x 5/16 inch, 2 x 1/4 inch.
Angle iron cutting at 45 degrees: 3 x 5/16 inch, 2 x 1/4 inch.
Channel capacity Z1: 3 x 1/4 inch; L: 2 x 1/4 inch.
U bar capacity U 3-5.7 lbs; I 3-5.7 lbs.
Punching specifications: 1 1/4 inch, 13/16 inch.
Flat bar notching capacity: 1 5/8 x 5/16 inch, 1 1/8 inch.
Round bar shearing diameter: 23mm.

Fanuc Tape Drill CNC Milling Machine

Skylarc Ref U168299

Fanuc Tape Drill Mate-Model T vertical CNC drilling/tapping machine
Year: 1991
Fanuc Series 0-M CNC control
Table size: 380mm x 650mm T-slot table
Bed riser plate: 400mm x 600mm
X axis travel: 240mm, Y axis travel: 320mm, Z axis travel: 300mm (from display and standard spec)
Spindle speed: up to 6000 rpm (standard spec for this model)
10-position automatic tool changer
Serial input uploads from machine, but not to machine
Extremely low hours – 169 spindle hours from new, ex-educational institution
200V 3-phase, 12 KVA power supply
Tooling and holders as pictured
Supplied with operator, parts, and maintenance manuals

Hafco Woodmaster Three Phase Thicknesser

Skylarc Ref U167337

Hafco Woodmaster T-20S Thicknesser
Spiral cutter head for smoother finishes and quieter operation
Maximum timber capacity: 508mm wide x 200mm high
Powerful 3.75kW motor
Manufactured in Taiwan, serial no. 141497, year 2014
Heavy-duty cast iron construction for stability
Fitted with emergency stop and D.O.L. starter
Fitted with digital thickness gauge for precise adjustment
20 amp three phase plug
Large handwheel for table height adjustment
Rear dust extraction port for efficient chip removal

Cammac Three Phase Band Saw

Skylarc Ref D167346

500mm x 600mm tilting cast iron table
250mm max cutting depth
450mm throat capacity
Adjustable blade speed with selector chart for various metals
Integrated blade welder, grinder, and cutter
3-phase, 415V, 50Hz power (16A plug fitted)
Includes spare blades (visible in packaging)
Suitable for metal cutting applications
Robust construction, made in Taiwan
Date of manufacture: 2003
Safety lamp and guards fitted
CAMMAC branded
Serial No: B45703

Arboga Maskiner Gear Head Drill Press

Skylarc Ref W167339

Model: A.B.Arboga Maskiner E830
600mm x 500mm T slot table
Adjustable height table
MT4 spindle taper
1.9hp three phase motor
Spindle speeds 80, 122, 160, 245, 290, 445, 580, 890 rpm
160mm spindle travel
2 speed ranges
Auto feed
Guards
16 amp three phase plug
Small mill vice
Top quality swedish machine

Luxcut Tool Cutter Grinder

Skylarc Ref T167362

Luxcut TC30 Tool & Cutter Grinder
End mill capacity: 2" (50mm) shank, 9" (225mm) OD, 10" (250mm) length
Swing over table: 9-3/4" (245mm)
Longitudinal table travel (X): 6" (150mm)
Cross travel of wheel table (Y): 3" (75mm)
Max motor assembly travel across table: 6" (150mm)
Max wheel: 5" x 2" x 1-1/4" (125 x 50 x 32mm) flaring cup
Motor: 230V, 1 phase, 1/3 HP (0.25kW), 2800 RPM, 50Hz
Tilt adjustment for wheelhead: +30° to -5°
Air bearing swivel: 360°, stroke: 10" (250mm)
Table infeed graduation: 0.001" (0.02mm)
Includes attached task light
Comes with 5C collet set in box and various accessories

Thermal Dynamics Plasma Welding Console

Skylarc Ref H167350

Thermal Dynamics WC 100B Plasma Welding Console
Includes torch, hose, and connection cables as shown
Paired with Miller Radiator 2A cooling system, 230V, 2.1A, 1Ph, 50Hz
Front panel with controls for settings, coolant flow meters, and power indicators
Cooling unit features easy access controls, coolant flow indicator, and robust construction
Good condition with minor cosmetic wear from typical workshop use

Amac Single Phase Jointer

Skylarc Ref T167336

AMAC jointer, model CT-200
Table width 220mm
Maximum cutting width 200mm
Heavy duty cast iron base and table construction
Fitted with fence and blade guard for safe operation
Shendian Electric D.O.L. starter, IP65 rating, 230V, 2HP motor
Emergency stop button installed
Standard NZ plug
Robust handwheel for table adjustment
Designed for woodworking applications including edge jointing and flattening
Used condition, machine shows minor cosmetic wear consistent with workshop use

Carba-Tech Single Phase Drum Sander

Skylarc Ref S167335

Carba-Tec MS-25B Drum Sander for wood sanding applications
240V, 50Hz, single phase power supply, 15A
2.25kW motor, 1500rpm drum speed
130mm max capacity
Model date: 08/2011
Wide conveyor belt for large workpieces
Includes a selection of sanding rolls and spare conveyor belt
Manual and parts list included
Emergency stop switch for added safety
Ideal for cabinetmakers, joiners, and woodworkers.
Made in Taiwan for Carba-Tec Pty Ltd

Scott Three Phase Gear Head Drill Press

Skylarc Ref R167334

Model: Z5025-1A Upright Drilling Machine
Maximum drilling diameter 25mm
380mm diameter table with T-slots
Spindle taper MT3
16mm keyless drill chuck fitted
Speed range: 100–2900rpm (8-step selection)
3-phase induction motor, 400V, 750/550W
Machine base with T-slots for extra rigidity
Includes operation manual
Mounted on concrete base
Safety interlock and emergency stop switch
Table height adjustment via crank handle
Manufacturer: Xin Yuan Electric Machine Co. Ltd

Three Phase Drill Press

Skylarc Ref O167383

Shanghai No.5 Machine Tool Works bench drill, model H5-3C
Maximum drilling capacity 25mm
350mm diameter round tilting table with T-slots
3-phase 420V, 50Hz power supply
Motor power 0.85/1.1kW, full-load current 2.05/2.47A
Spindle speed range 125–2880rpm (9 speeds)
Manual feed with depth stop
Equipped with 13mm keyed drill chuck
Emergency stop
13mm keyless chuck
110mm spindle travel
Protective safety guard fitted
Sturdy cast iron base for stability
Used condition, signs of normal workshop use

Joemars EDM Machine

Skylarc Ref Y167367

Joemars AF50 EDM machine
Manufactured by Joemars Machinery & Electric Industrial Co., Ltd
Model JM322, Serial No. 9060724, Year: 1994
T slot table size: 600mm x 300mm
Tank size: 870mm x 480mm x 330mm
Three phase power supply
Control panel with Heidenhain display and manual/auto settings
Includes operational manual and spare filter elements
Machine vice included on table
Condition as shown in photos

To see this machine running:
https://youtu.be/VvLeiUiPcn0

Strands Three Phase Gear Head Drill

Skylarc Ref G167349

Strands S68 floor standing drill press made in Sweden
415V, 3-phase, 0.75/0.90kW motor
Spindle speeds: 100, 205, 345, 440, 695, 1450, 2900 RPM
2 speed ranges
Table size 480mm x 350mm with T-slots
150mm spindle travel
MT3 spindle taper with 13mm keyless chuck
Integrated work light and safety guard
Equipped with machine vice
Push-button start/stop controls
Heavy-duty cast iron base for stability
Industrial build quality suitable for workshop use

Strands Three Phase Gear Head Drill

Skylarc Ref F167348

Strands S68 floor standing drill press made in Sweden
415V, 3-phase, 0.75/0.90kW motor
Spindle speeds: 100, 205, 345, 440, 695, 1450, 2900 RPM
2 speed ranges
Table size 480mm x 350mm with T-slots
150mm spindle travel
MT3 spindle taper with 13mm keyless chuck
Integrated work light and safety guard
Equipped with machine vice
Push-button start/stop controls
Heavy-duty cast iron base for stability
Industrial build quality suitable for workshop use

Strands Three Phase Gear Head Drill

Skylarc Ref A167343

Strands S68 floor standing drill press made in Sweden
415V, 3-phase, 0.75/0.90kW motor
Spindle speeds: 100, 205, 345, 440, 695, 1450, 2900 RPM
2 speed ranges
Table size 480mm x 350mm with T-slots
150mm spindle travel
MT3 spindle taper
Push-button start/stop controls
Heavy-duty cast iron base for stability
Industrial build quality suitable for workshop use

Erlo Gear Head Drill Press

Skylarc Ref Z167342

Model: Erlo TS25
400mm x 380mm T slot table
MT3 spindle taper
120mm spindle travel
2 speed ranges 1500, 3000 rpm
8 spindle speeds 65, 540, 125, 1055, 185, 1560, 365, 3060rpm
Adjustable height table
Forward and reverse
O.5kW motor
Guards
Mill vice
Three phase 16 amp plug

Erlo Gear Head Drill Press

Skylarc Ref X167340

Model: Erlo TS25
400mm x 380mm T slot table
MT3 spindle taper
120mm spindle travel
2 speed ranges 1500, 3000 rpm
8 spindle speeds 65, 540, 125, 1055, 185, 1560, 365, 3060rpm
Adjustable height table
Forward and reverse
O.5kW motor
Guards
Mill vice
Three phase 16 amp plug

Small Hydraulic Guillotine

Skylarc Ref Q168269

W M Engineering sheet metal guillotine.
Cutting width is 1200mm.
Foot pedal operated mechanism.
Steel construction.
Machine includes upper and lower blades. Manual back gauge system.
Painted green exterior.
3 phase

Heltos Heavy Duty Three Phase Drill

Skylarc Ref B167396

Heltos VS20B industrial pillar drill
Made in Czechoslovakia, year 1988
Three phase, 1.5kW main motor, MEZ Mohelnice motor
Two speed ranges, 12-speed gearbox, forward and reverse
Spindle speeds 112–2800rpm
MT3 spindle taper
Approx 170mm spindle travel
340mm x 460mm table, 180mm milling/drilling vice included
Integrated coolant pump
Fitted with 20A 500V 5-pin plug
Clear speed/feed charts and robust, heavy-duty construction

HWM Manual Sheet Metal Guillotine

Skylarc Ref E167347

H.W.M. Engineering Ltd manual guillotine
1240mm maximum cutting width
Foot operated
Heavy-duty steel construction
Spring return system visible under the working area
Blades appear in good condition

Steel Top Workbench with Two Drill Presses

Skylarc Ref P167384

Double pedestal drill press workstation with heavy-duty steel frame and 3mm steel top
Features two drill presses: Meteor Manufacturing & Engineering Co. (Auckland) Model 9766 and Masport
Meteor drill fitted with Crompton Parkinson 0.5HP motor, 220/240V, 3.8A, single phase, 1425 RPM
270mm x 250mm table
110mm spindle travel
Masport drill fitted with EMAIL/Westinghouse 0.5HP motor, 230/250V, 3.5A, single phase, 1420 RPM
Masport spindle speed options: 3500, 2110, 1275, 770, 465, 280 RPM
255mm x 260mm table
Approx 100mm spindle travel
Both drills equipped with operator safety guards and on/off switch panels
Power cables included, fitted with single-phase plugs

Hafco Sandblasting Booth

Skylarc Ref W167365

Hafco SB-420 Sandblasting Cabinet
Model: SB-420, Serial No: 033, Manufactured 12/2014
Large internal workspace visible through a shielded top window
Fitted with two glove ports, internal lighting, and dust extraction unit
Includes sandblasting gun, foot pedal control, and pair of gloves
Comes with a bag of blasting media
Single-phase power plug fitted
Metal construction with front access viewing and side access door
Ideal for surface preparation, rust removal, paint stripping, and restoration tasks

Three Phase Linisher

Skylarc Ref L167302

BM brand industrial linisher
150mm wide belt, 460mm long work area with door open
Fitted with AXEL JOHNSON TEKNIK A/S motor
Motor power: 4kW / 5.5HP, 400/230V, 50Hz, IP54 rating
Heavy-duty steel construction with integrated stand
Large flat platen for efficient grinding and finishing
Emergency stop button and safety guard fitted
3-phase motor with standard industrial plug
Well-suited for fabrication workshops and metalworking tasks
Condition appears tidy, all panels and guards in place

Manual Sheet Metal Rollers

Skylarc Ref B167344

1280mm wide rollers
Approx 75mm diameter rollers

MEP Scorpio 300 Cold Saw

Skylarc Ref R168270

MEP Scorpio 300.
Blade diameter is 300mm.
Blade speed 30/60 rpm.
Main electrical controls are Sprecher + Schuh KS3-16.
Motor rated at 2 HP, 415V, 3 phase, 50 Hz.
Machine is equipped with a vice for holding workpieces.
Electrical connection uses a 20A 500V plug.
Stand is included as part of the unit.

Large Double Sided Workbench with Vices

Skylarc Ref N167356

Heavy-duty workshop bench
Worktop dimensions: 1640mm x 920mm
Bench height: 890mm
Solid timber frame construction with thick work surface
Fitted with four Record brand vices: 1 x No.6 and 3 x No.84 models
Integrated tool holders for files and screwdrivers
Lower shelf for storage
Ideal for engineering, metalwork, or general workshop use
Functional and sturdy, showing typical signs of workshop use

Large Double Sided Workbench with Vices

Skylarc Ref M167303

Heavy-duty workshop bench
Worktop dimensions: 1640mm x 920mm
Bench height: 890mm
Solid timber frame construction with thick work surface
Fitted with four Record brand vices: 2 x No.84, 1 x No.4, 1 x No.35O models
Integrated tool holders
Lower shelf for storage
Ideal for engineering, metalwork, or general workshop use
Functional and sturdy, showing typical signs of workshop use

Nissan SR20 Engine on Stand

Skylarc Ref Y167393

Nissan SR20 fuel injected engine with double overhead cam configuration
Includes engine computer (ECU) with clearly labeled interface for educational use
Mounted on a heavy-duty steel stand suitable for engine operation or display
Previously used for automotive training and demonstration purposes
Visible Nissan 53J engine block marking
Wiring harness present with educational labeling on connections
Alternator and flywheel included as pictured
Large separate steel base frame also included (shown in final images)
Throttle body and some intake components removed as shown
Condition is consistent with workshop and instructional use

Cast Engineering Table

Skylarc Ref T167388

Heavy-duty cast engineering table
30mm thick precision ground steel top
Solid cast iron frame for maximum stability
Heavy cross-bracing underneath for increased strength
Adjustable levelling feet for stable setup on uneven floors
Partial covers
Excellent workbench for engineering, fabrication, or machine shop use

WIA Single Phase MIG Welder

Skylarc Ref V167364

WIA Weldmatic 190 MIG welder on wheeled cart
Max output 190A, 240V, 50Hz single phase operation
Duty cycle: 190A @ 15%, 145A @ 25%, 72A @ 100%
Wire feed and voltage control with both coarse and fine adjustment
Suitable for gasless flux-cored and gas-shielded MIG welding
Wire spool capacity: up to 5kg, with knurled drive roll
Comes with earth clamp, wire feeder, drive rolls, and accessories as pictured
Includes quick reference setup chart inside panel
Clear settings chart for both solid and flux-cored wire applications
No MIG torch included

Tool Cabinet and Contents

Skylarc Ref O167357

Lista AG machine tooling cabinet
Heavy-duty steel construction with blue finish
Double-door front with recessed handle
Two internal drawers and one large pull-out lower tray
Drawer inserts included for organized tooling storage
High-quality ribbed rubber mat on top
Mounted on castor wheels for easy mobility
Contents of aluminum, gloves, etc
No key included for door lock
Used condition with general marks and wear as pictured

Tool Cabinet and Contents

Skylarc Ref M167355

Lista AG machine tooling cabinet with contents included
Heavy-duty steel construction
Equipped with two large compartmentalised drawers and one large lower drawer/tray
Internal drawer dividers and organisers installed
Cabinet sits on four castor wheels for easy mobility
Textured non-slip rubber mat on top surface
Contents include assorted hand tools and workshop items as shown
No key supplied
Used condition with some marks and wear consistent with workshop use

Sand Blasting Cabinet

Skylarc Ref V167338

Hafco Metalmaster sandblasting cabinet model SB-375
1.2kW motor, 240V power
Cabinet weight 90kg
Air capacity 340L/min
Integrated dust collector
Large front access window with protective guard
Internal gloves and perforated steel work tray
Control panel with power, light, and dust collection switches
Pressure gauge (piezometer)
Air regulator fitting is missing
Serial No: 001, Mfg date 09/2015
Unit was operating previously
Good overall condition with signs of normal workshop use

Small Bench Top Sheet Metal Rollers

Skylarc Ref O167331

Niagara manual sheet metal rollers
Working width 780mm
Roller diameter approximately 55mm
Hand crank operation with geared end
Cast iron construction for durability
Solid steel frame base
Ideal for sheet metal forming and rolling
Classic manual design, suitable for workshop or light industrial use
One top handle broken but functional

Bramley Hand Punch on Stand

Skylarc Ref M167329

Bramley Hand Punch, Model 023
Manufactured by R.R. Bramley & Co. Ltd, Auckland, New Zealand
Heavy-duty manual punch suitable for metalworking and fabrication
Maximum punch capacities (diameter x thickness): 3mm x 1.5mm, 4mm x 2.0mm, 5mm x 3.0mm, 6mm x 3.0mm, 8mm x 4.0mm, 10mm x 4.0mm
Includes a selection of punches and dies visible in photos
Lever-action operation for ease of use
Quality guaranteed, New Zealand made
Sturdy base plate for mounting
Suitable for workshop and industrial use

Cast Engineering Table on Stand

Skylarc Ref G167323

Skoda 795mm x 600mm cast table
25mm thick
With cover
Steel framed stand

WIA Single Phase MIG Welder on Trolley

Skylarc Ref S167309

WIA Weldmatic 190 MIG welder on green metal trolley with shelving
Maximum output: 190A, operates on 240V 50Hz single phase power
Duty cycle: 15% @ 190A, 25% @ 145A, 100% @ 72A
Wire feed and voltage control with coarse and fine adjustment
Includes MIG torch, earth clamp, gas hose, spool of wire, regulator
Supports gasless flux-cored and solid wire operation, spool inside unit
Settings and guide chart included inside the wire compartment
Rated input current: 14.4A, maximum input current: 36A
IP21 rating, suitable for workshop and light industrial use
Unit is mounted on a sturdy rolling trolley for easy mobility

Trolley with Hydraulic Porta Powers

Skylarc Ref Y168277

Enerpac hydraulic pump with control lever labeled for bend and eject
Metal trolley has three shelves and caster wheels.
Includes various hydraulic hoses connected to pump.
Analogue gauge panel mounted on top of trolley.
Red hand hydraulic pump.
Disc-shaped metal component and metal rods present on shelf. Martonair pneumatic actuator visible on shelf. No further specifications or model numbers observed.

Go-Power Systems Dynamometer

Skylarc Ref Z167394

Go-Power Systems engine test stand
Equipped with Robin single cylinder diesel engine
Go-Power Systems (Palo Alto, Calif.) branded instrumentation panel with multiple gauges
Features hour meter, RPM, oil, vacuum, and other engine instrumentation
Mounted on a robust steel trolley frame with locking castor wheels for mobility
Go-Power dynonometer M13, serial number RD2933
Steel frame includes heavy-duty engine support, exhaust, and fluid management components
Electric start and ignition controls on instrument panel
Suitable for engine testing, demonstration, or educational use

Bramley Bench Top Finger Folder

Skylarc Ref P168294

Bramley finger folder.
595mm folding width.
8 x fingers for adjustable folding width configuration.
Manual lever operation.
Base has mounting holes for securing to workbench.
Metal construction with blue and grey painted surfaces.
Handle features a black plastic grip.
Manufacturer Bramley, Herberts Engineering Ltd, Auckland, New Zealand.

Large Lot of Drills, Taps Etc

Skylarc Ref L168186

Approx 90 assorted engineering cutting tools
Includes approximately 50 HSS twist drills in sizes from small to large, examples include 5.0mm, 9.0mm, 10.5mm, and 14.5mm
14 HSS centre drills/countersinks in various sizes
approx 10 assorted taps, includes hand taps and machine taps, metric and imperial, with plastic storage cases
9 assorted reamers, HSS, various sizes and flute types
Brands visible include Sutton, P&N, Presto, and Goliath
Mix of new and lightly used, all appear sharp and ready for use

Enerpac Hydraulic Cylinder

Skylarc Ref I168287

Enerpac hydraulic cylinder model C-254. Maximum pressure 10,000 PSI. 25 ton capacity.
Includes base mounting plate. Jonel Hydraulics label present.
Hydraulic connection fitting shown. Marked Enerpac 25 on cylinder body. No additional accessories included.

Iscar Chamdrill Drill Inserts

Skylarc Ref B168280

Eight boxes of Iscar drill inserts.
Boxes labeled CHAMDRILL and marked IC908 NEW.
Four boxes labeled IDI 0539-SK IC908, IDI 137-SK IC908, P15-P30 M20-M30, 1061535127-6044288, Made in Israel, 2PCS, barcode 05505235.
Four boxes labeled IDK 0539 IC908, IDK 137 IC908, P15-P30 M20-M30, 1061575127-6040319, Made in Israel, 2PCS, barcode 05506363.
Each box contains 2 drill inserts (one has only 1)
Total of 15 inserts.
Plastic storage cases included.

Bin of Lathe Tooling and Accessories

Skylarc Ref J168262

Lot includes multiple lathe tool holders and parts.
Quick change tool holders
Visible tool brands and models include Iscar MDJNR 2525M-15, Iscar TOP-GRIP TDDR-2525-S, Carboloy VT00R-2525-22, Seco Tools 150.10.25-4 Swiss Made, and Mircona R533.22S-16.
Various turning, parting, and drilling tool holders are present.
Includes selection of indexable insert tool holders.
Assorted lathe jaws and centers included.
Some black steel square shank tools present.
Multiple clamping and boring bars present.
Condition and completeness of inserts and tools as shown in photos.

Avery Materials Strength Tester

Skylarc Ref C167345

For testing the strength of materials with rotational torque
Adjustable size receiver
Torque settings 150nm, 300nm, 750nm, 1500nm
Adjustable rotation speeds 3 1/3, 10, 30, 90 degrees per minute
Forward and reverse

Three Phase Shaper

Skylarc Ref I167325

Model: B635-1 metal shaper
Table dimensions: 345mm x 300mm x 300mm
Max stroke length: 350mm
Supplied with an 185mm milling vice
Fitted with rotary table/vice mount
32 amp industrial plug for power connection
Heavy-duty cast iron construction
Manual controls and feed adjustments
Motors and electrics appear intact as shown
Includes handles and controls as pictured
Industrial workshop machine, suitable for metal shaping and slotting operations

Milling Machine Vice

Skylarc Ref B167370

Heavy-duty machine vice with 155mm jaws
Swivel base with degree markings for precise angle adjustment
No handle
Steel construction, robust and built for industrial use
Suitable for milling machines and workshop applications
Mounting slots on base for secure attachment
Well-used condition, with wear and residue from previous use visible

Dyco Single Phase Drill Press

Skylarc Ref U167363

Dyco bench drill press, made in New Zealand
Six speed DP2 model with belt drive
Speed range: 280, 465, 770, 1275, 2110, 3500 RPM
Table size 260mm x 270mm
100mm spindle travel
Motor: Brook Crompton Betts 370W, single phase, 240V
Fitted with standard 3-pin NZ/AU plug
Manual up/down spindle feed with three-arm handle
Includes table clamp as pictured
Solid cast iron base for stability
Shows general wear from use, see photos for condition

Milling Machine Vice

Skylarc Ref Q167359

150mm wide jaws
Maximum jaw opening 160mm
Swivel base with degree markings for easy angle adjustment
Heavy-duty cast iron construction
Three mounting holes per jaw for secure clamping
Manual screw handle for fine adjustment
Suitable for milling machines, drill presses, and general workshop use

Woodfast Disc Sander

Skylarc Ref Q167333

Carbatec WDS-300 disc sander
300mm sanding disc
Cast iron table 430mm x 160mm
Table tilt adjustable from 0° to 45° with clear angle scale
Motor: 0.75kW (750W), 240V, draws 4.3A, single phase
No load speed: 1420rpm
Fitted dust extraction port for cleaner operation
Heavy duty yellow cast frame with non-slip feet
Emergency stop switch for added safety
Made by Carba-Tec, Brisbane Australia
Model date: 10/2009
Ideal for woodworking, smoothing edges, and shaping timber

Milling Machine Vice

Skylarc Ref D167320

Heavy-duty machine vice with 155mm jaws
Swivel base with degree markings for precise angle adjustment
No handle
Steel construction, robust and built for industrial use
Suitable for milling machines and workshop applications
Mounting slots on base for secure attachment
Well-used condition, with wear and residue from previous use visible

Milling Machine Vice

Skylarc Ref C167319

Heavy-duty machine vice with 155mm jaws
Swivel base with degree markings for precise angle adjustment
No handle
Steel construction, robust and built for industrial use
Suitable for milling machines and workshop applications
Mounting slots on base for secure attachment
Well-used condition, with wear and residue from previous use visible

Milling Machine Vice

Skylarc Ref A167317

Heavy-duty machine vice with 155mm jaws
Swivel base with degree markings for precise angle adjustment
No handle
Steel construction, robust and built for industrial use
Suitable for milling machines and workshop applications
Mounting slots on base for secure attachment
Well-used condition, with wear and residue from previous use visible

Milling Machine Vice

Skylarc Ref Z167316

Heavy-duty machine vice with 155mm jaws
Swivel base with degree markings for precise angle adjustment
No handle
Steel construction, robust and built for industrial use
Suitable for milling machines and workshop applications
Mounting slots on base for secure attachment
Well-used condition, with wear and residue from previous use visible

Plastic Drawer Unit w/ Small End Mills

Skylarc Ref V168300

Plastic Drawer Unit w/ Small End Mills.
Plastic Drawer unit 230x135x190mm.
Half the drawers have assorted new or lightly used small end mills of various types and sizes, many still in cases.

Rotary Table

Skylarc Ref W167313

320mm diameter
Unbranded

Trolley of NT40 Tooling

Skylarc Ref M168187

NT40 mill tooling trolley with heavy duty steel construction and lockable castor wheels
Includes 16x NT40 tool holders and collets, with a variety of attached tooling
Examples include drill chucks, ER collet chucks, face mill arbor, shell mill holders, and end mill holders
Tooling holder rack designed to suit NT40/BT40 taper
SHUTER brand trolley, features 2-tier tool inserts and top tray for additional tools or accessories
Ideal for CNC or manual milling machine setups needing mobile storage and quick access

Welding Rotator

Skylarc Ref Q168165

Manufacturer Matsumoto Kikai Co. Ltd.
Model PS1A-15.
300mm faceplate installed.
200mm chuck fitted to faceplate.
Motor type DC 85W.
Table speed 1RPM.
Table tilt range 0 to 90 degrees.
Load capacity horizontal 80kg.
Load capacity vertical 40kg.
Serial number 515385.
Methods Sydney Australia label present on case.
Foot pedal is attached to cable.
Straight and hold control lever present on front panel.
Includes attached power and control cables.

Bramley Hand Shear

Skylarc Ref P168164

Bramley hand lever shear. Model K.S.5. Manufactured in New Zealand by R.R. Bramley & Co. Ltd.
Lever-operated manual shear.
Fixed to bench with mounting holes.
Cutting blade length 200mm.
Supplied by Lydon Machine Tools Limited, Auckland.

Fantech 3-Phase 950mm dia Industrial Ventilation Fan Assembly

Skylarc Ref C167969

Fantech industrial ventilation fan assembly
Model: AP0402AA5D007/13o
Australian made, manufactured 03/2004
Fan diameter 950mm
Main housing approx 840mm long, 1000mm diameter (excluding flange)
1.1kW WEG 3-phase motor, 415V, 3Ph, 50Hz
Motor housing 450mm long, 430mm diameter
Removable mounting brackets included
Serial No. 237488, Order No. 13063
Main fan spins freely by hand
Heavy-duty galvanised steel construction.

Fantech 3-Phase 950mm dia Industrial Ventilation Fan Assembly

Skylarc Ref B167968

Fantech industrial ventilation fan assembly, model AP1004CAS12D110/17o
950mm diameter fan, 11kW WEG 3-phase motor
Manufactured 03/2004, Australian made
Rated for 415V, 3-phase, 50Hz operation
Main housing approx 840mm long, 1000mm diameter (excluding edge flange)
Removable mounting brackets included
Fan spins freely by hand
Original Fantech and specification labels present
Serial no. 237487
Suitable for large-scale ventilation or industrial extraction applications

Fantech 3-Phase 950mm dia Industrial Ventilation Fan Assembly

Skylarc Ref A167967

Fantech industrial ventilation fan assembly, model AP-1006P9804022C
3-phase, 415V
950mm diameter, large capacity airflow
Heavy-duty galvanised steel construction
Blue metal blades, direct drive motor
Motor manufacturer: CMG
Australian made, quality ventilation product
Suitable for factory, warehouse or large commercial spaces
Serial no: 23/466
Date of manufacture: 20-MAR-2004
Mounting feet for floor installation included.
Fan blades spin easily.

Fantech Industrial Fan Assembly

Skylarc Ref Z167966

Fantech industrial extraction fan assembly
Model: AP10060CPB06424B6
Serial number: 237486
Project: FANTECH NZ LTD, Location: SAF5
Heavy-duty galvanised steel housing
CMG electric motor
Large axial blue fan blades for high airflow applications
Mounting feet for stability
Fan diameter approx. 1 metre (estimate from images)
Designed for ventilation, extraction, or cooling in industrial environments
Australian made
Fan blades spin easily.
Full motor and specification details shown in close-up images

Large Lot of Mill Tooling

Skylarc Ref H167376

Assorted HSS and cobalt threaded end mills and roughing cutters
Sizes range from 1.5mm to 20mm diameter
Multiple brands including Sutton, Dormer, Somta
Mix of two flute and multi-flute designs
Suitable for metalworking and general machining

15-Door Storage Locker Cabinet

Skylarc Ref Z168070

15-Door Storage Locker Cabinet.
Wood and MDF construction.
Vintage Lockwood branded locks on all but one door. One key is included that opens all locks.
Each inner space is approx 515x290x380mm.
Heavy unit, buyer should bring extra hands to assist loading as we will only have one staff onsite..

Superjet Eutalloy S Oxy-Acetylene Thermal Spray Torch Kit

Skylarc Ref B168046

Superjet Eutalloy S Oxy-Acetylene Thermal Spray Torch Kit by Castolin Eutectic.
Complete professional thermal spray kit for metal surface restoration and protection.
Includes SuperJet Eutalloy torch body, 3 spray nozzles, shield, and control knobs.
Range of alloy powders: Tungtec 10112, BronzoChrom 10185, NiTec 10224, Chromtec 10680 (each 500g).
Flux container (solution R104, 0.4kg) included.
Supplied with accessories: adjustable spanner, maintenance tool, and starter consumable pack.
Operating pressure chart present on torch for precise setup.
SuperJet Eutalloy carry case.
Ideal for: rebuilding worn parts, hardfacing, corrosion and wear protection, and joining nickel-base alloys.
Items appears as new unuse.

Koike Beetle IK-12 Track Welder w/ Track & Welding Frame Trolley

Skylarc Ref Q168035

Koike Beetle IK-12 Track Welder w/ Track & Welding Frame Trolley.
Welder made in Japan.
Includes a mobile 1980x660x1060mm heavy steel trolley frame for mounting welding materials.
A gas bottle bracket is mounted at both Trolley ends.
See photos for further Trolley design details.
Previously used in a Uni education workshop classroom.

Hydraulic Engine Crane

Skylarc Ref R167308

2 ton hydraulic engine crane with adjustable boom
Lifting positions: 2 ton, 1.5 ton, 1 ton, 0.5 ton capacity
Heavy-duty steel construction with castor wheels for easy mobility
Hydraulic ram rated for 8 ton operation
Folds up for convenient storage when not in use
Durable painted finish, some signs of typical workshop use visible
Chain and hook included for secure engine lifting

Large Lot of Spanners

Skylarc Ref N168292

Large lot of spanners approx 40 pieces included
Mix of open-end, ring, and combination spanners
Brands include Stahlwille, King Dick, Aigo, Belgra, INFAIR, and others
Sizes range from small to large, both metric and imperial
Includes a few specialist spanners and additional hand tools (screwdrivers, hex keys, pliers) as pictured
Alloy steel and chrome vanadium construction
Condition varies; most show signs of regular workshop use
Great for workshop, garage, or adding to your toolkit

Large Lot of End Mills

Skylarc Ref O168189

Large selection of milling and cutting tools – approx pieces
Includes SOMTA HSS 2 flute endmills in sizes 3mm, 4mm, 8mm, 10mm, and 20mm
Several new boxed Sutton Tools 20mm HSS-Co8 4 flute endmills
Range of centre drills, countersinks, and slot drills
Various threaded shank cutters and indexable cutting heads
Some tools show signs of use, others unused in original packaging
Brands include Sutton Tools, SOMTA, and others
Great for machinists, toolmakers, or workshop spares

Bin of Milling Accessories

Skylarc Ref T168168

Large assortment of milling machine bits and accessories
Includes box of T-slot bolts, step clamps, nuts, washers, and clamping hardware
Range of spanners and wrenches for machine tool setup
Selection of lathe chuck jaws and parallels
Various machine-specific fixtures and accessories as shown
Items are used and show typical workshop wear
Ideal for machinists needing extra tooling, spares, or workshop setup

Single Phase Hydraulic Pump

Skylarc Ref L168290

Electric motor: Dietet Motorenfabrik Type VDE 0530/11.72.
Motor rated at 0.75 kW.
Motor voltage 380 V.
Motor current 2.4 A.
Motor speed 1380 rpm.
Power unit mounted on a mobile wheeled steel frame.
Includes multiple ball valves with red handles labeled 11, 12, 13, 14, 15, 16, Ab, Ab.
Fitted with attached hydraulic hoses.
Contains integrated control switch.
Features an attached oil reservoir tank.

Small Stainless Tank

Skylarc Ref G168285

Manufacturer is Acecore Surmet. Vessel constructed from 316 stainless steel. Serial number 47720.
Design code is BS5500 1983.
Category 3. Maximum working pressure is 2.07 bar and FV.
Design pressure is 2.28 bar and FV. Test pressure is 3.68 bar.
Maximum jacket pressure is 3 bar. Design temperature is 150 degrees Celsius.
Vessel is equipped with top ports and clamp fasteners.
Fitted with a lower outlet valve. Mounts on four stainless steel legs.
No lid
Missing 2 covers

Small Stainless Tank

Skylarc Ref F168284

Manufacturer is Acecore Surmet. Vessel constructed from 316 stainless steel.
Design code is BS5500 1983.
Category 3. Maximum working pressure is 2.07 bar and FV.
Design pressure is 2.28 bar and FV. Test pressure is 3.68 bar.
Maximum jacket pressure is 3 bar. Design temperature is 150 degrees Celsius.
Vessel is equipped with top ports and clamp fasteners.
Fitted with a lower outlet.
Mounts on four stainless steel legs.
No lid

Assorted Indexable Carbide Inserts Iscar Secolor Mitsubishi Fettte

Skylarc Ref A168279

Assorted indexable carbide inserts in original plastic storage cases. Brands shown include Iscar, Secolor, Mitsubishi, Fette, and others. Some cases labeled SPMT 09T308-WH 235, XOMT 060204-HQ IC630, DNMG150604-M3 TP3000, TPMR 090204 135 P25 5977, WENDEPLATTEN 1052316 10 Stück LC240T, LNMx 150608R-HT IC428, LNMx 150608T-R IS8, Cast Iron K05-K20, and others. Inserts are of various geometries including square, triangular, and rhombic. Quantities per box and condition may vary. Some packaging provides technical details including material compatibility such as steel, stainless, and cast iron. Manufacturer's part numbers and country of origin (e.g. Israel) visible on some labels. Sale is for all items pictured.

Assorted Indexable Carbide Inserts Mixed Brands and Types

Skylarc Ref Z168278

Lot includes various indexable carbide inserts in multiple plastic storage boxes. Brands identified include Iscar, Fette, Kennametal, Sandvik, and Widia. Marked models include SOMX 050204-DT, APKT 1003PDR LC240T, NTP2R KCB50, MS12 2-300-4E, RCMM 120400 E46 853, TPKR 090204 K, TNC150 P35 Be, and others.

Bramley Hand Lever Shear Model H.S.4

Skylarc Ref O168163

Bramley hand lever shear.
Model H.S.4.
Manufactured in New Zealand by R.R. Bramley & Co. Ltd.
Fitted with 160mm blades.
Bench mounted design.
Manual lever operation for cutting.
Base mounting holes for securing to work surface.

Black & Decker Bench Grinder w/ Column Stand

Skylarc Ref C168073

Black & Decker Bench Grinder w/ Column Stand.
Made in England
Age unknown.
8" Size.(200mm Diameter grinding wheels)
Includes heavy steel 800mm tall stand.
Large safety eye guards attached.
Older unit used for many years in a Uni education workshop classroom.

2 x Quick Change Lathe Tool Posts

Skylarc Ref N167382

Set of 12 quick change tool holders for lathe use
Includes two adjustment wrenches
Mixed styles, mostly steel construction, heavy-duty industrial quality
Visible surface rust present but all appear intact and functional
See photos for included types and overall condition

4 x Matched V Blocks

Skylarc Ref M167381

Set of 4 steel V-blocks
Dimensions: 72mm x 36mm x 55mm each
Solid construction, ideal for holding round or cylindrical workpieces
Visible yellow paint remnants, with surface wear consistent with workshop use
V-groove design for improved stability during machining, inspection, or marking
Suitable for use with milling machines, drill presses, grinders, and other workshop setups

6 x 20mm Lathe Tools

Skylarc Ref J167378

Assortment of 6 turning tool holders for metalworking lathes
Brands include Sandvik Coromant (T-Max), MIRCONA (Sweden), and SECO
Models visible: SECO SCLCR2020K09, SECO SVLBR2020K16, MIRCONA R152S-2020x12x3/75-100
Mixed conditions – some holders show surface rust and signs of prior use
Various tool styles, insert shapes, and sizes represented
See photos for specific product markings and condition

ER32 Collet Set

Skylarc Ref E167373

ER32 collet set in wooden storage case
Includes 15 ER32 collets, many still bagged
Collet sizes visible: 6, 8, 10, 11, 12, 13, 14, 16, 18, 19, 20, 21, 22, 23, 24mm
Includes collet chuck and spanner
Collets and chuck fit neatly in fitted wooden box
Some minor marks on exterior of case
SG logo on case
Well suited for milling or CNC applications

Lathe Tool Tips and Accessories

Skylarc Ref Z167368

Assorted lot of lathe and CNC tooling inserts and holders
Includes brands such as SECO, Sandvik, and Multona
Various carbide inserts in different shapes and grades, new and used
Multiple original packaging trays with inserts (some trays partially full)
Tool holders included: SCLCR 1616 H09 and SECO 150.10A-25-3 parting tool blade
Types visible: turning, threading, parting, and general machining inserts
Insert types include SECO 16ER AG60 CP500 threading inserts (at least 4 pcs)
Mixture of positive and negative geometry inserts
Suitable for general metalworking, CNC, and manual lathes
Items are as pictured – what you see is what you get

Karcher Commercial Vacuum Cleaner

Skylarc Ref S167361

Karcher WD 6 P Premium wet and dry vacuum cleaner
Model: 1.348-275.0, made in Romania
Power: 220-240V, total 2200W, 1300W motor
Durable stainless steel container
Integrated power tool socket for automatic on/off
Versatile for wet and dry cleaning tasks
Flexible suction hose included
One extension pipe is missing
Shows signs of workshop use but in functional condition
IPX4 rated for splash protection
Power cord and main hose present

Mitutoyo Dial Indicator w/ Adjustable Magnetic Stand

Skylarc Ref D168048

Mitutoyo Dial Indicator w/ Adjustable Magnetic Stand.
Dial model No. 2046-08
Also includes Mitutoyo magnetic stand model 7010S.

Zopf Profile Rollers (No formers)

Skylarc Ref N167330

Zopf Biegemaschinen GmbH Ringbiegemaschine (Profile Ring Roller)
Model ZB 60, built 1997
Three driven shafts with manual top shaft adjustment
Includes integrated control switches for on/off and direction
Powerful geared electric motor with industrial plug
Serial number: 97526 SE
Clear graduated scale for precise adjustment
No former rollers included
Made in Germany, robust construction
Previously used in a technical training environment
Suitable for bending pipe, tube, and profile sections (formers required, not included)

Vintage Starrett 50-75mm Outside Micrometer + Gear Tooth Vernier Calipers

Skylarc Ref B168020

2x Vintage Starrett precision tools.
Includes:
50-75mm outside Micrometer No.436M with wood case.
Gear Tooth Vernier Caliper No.456M with felt lined vintage case.
Both vintage tools have been well maintained.

Mercer Series 590 Magnetic Base w/ Wood Case

Skylarc Ref Y168017

Mercer Series 590 Magnetic Base.
Model No.117C/591
Made in England.
230mm height excluding secondary arm.
Wood case.
Well maintained unit.

Mercer Series 590 Magnetic Base w/ Wood Case

Skylarc Ref X168016

Mercer Series 590 Magnetic Base.
Model No.117C/591
Made in England.
230mm height excluding secondary arm.
Wood case.
Well maintained unit.

Quick Knurl

Skylarc Ref V167910

Quick-I/KE quick knurling tool
Shaft size: 20mm x 25mm
Made in Austria by Willa, patent design
Precision dial settings for knurl size adjustment
Dual knurling wheels for producing consistent patterns
Solid steel construction for durability
Stamped with serial number 043821
Suitable for use in lathe operations
Shows some cosmetic marks from use, functionally sound

Cast Engineering Table

Skylarc Ref R168296

460mm x 305mm surface
Cover
Handles

Cast Engineering Table

Skylarc Ref Q168295

500mm x 395mm surface
Cover
Handles

Infanger Deep Parting Tools

Skylarc Ref M168291

12 Deep Parting x tools
Infanger 3k x 11, 3f x 1
With large selection of new blades
Steel box

9 x Involute Gear Cutters

Skylarc Ref I168183

Set of involute gear cutters, used for machining gear teeth
Includes 9 cutters, sizes as follows:
14DP No.1, 135T Rack, 20° PA, D+F 154"
2 MOD No.3, 35-54T, 20° PA, D+F 170
14DP No.6, 17-20T, 20° PA, D.1608 HS TEC
No.8, 12/13T
2 MOD No.3, 35-54T, 20° PA, D+F 170
M-6 - 14DP, D.1617 - 200PA, 17/20T, HSS Sutton
10DP, 20PA, No.7, Bevels
D+S 154", Involute, 20°, 14DP, 14-17T
135-Rack, 2 MOD No.1, D+F 170, 20° PA
Condition as pictured, some oxidation on a few cutters

9 x Involute Gear Cutters

Skylarc Ref H168182

No. 8, 24 DP, 12-13 teeth, INVOLUTE
2 MOD No. 3, 35-54T, 20° P.A., D+F-170
2 MOD No. 1, 135 RACK, 20° P.A., D+F-170
2 MOD No. 3, 35-54T, 20° P.A., D+F-170
2 MOD No. 3, 35-54T, 20° P.A., D+F-170
2 MOD No. 3, 35-54T, 20° P.A., D+F-170
16 DP, D.141, No. 7, 14-16T, 20° P.A.
10 DP, 20° P.A., No. 1
2 MOD No. 3, 35-54T, 20° P.A., D+F-170

Set of nine milling cutters for gear or spline cutting
Various diameters and tooth profiles as listed above
Visible light surface rust on some items, cutting edges appear usable

8 x Involute Gear Cutters

Skylarc Ref G168181

Set of involute gear cutters in various sizes and module/DP specifications
Includes:
14DP No 1, 20° PA, 135 rack, D+F 15A
2 MOD No 8, 20° PA, 312-137T
2 MOD No 3, 20° PA, 35-54T, D+F 170
2 MOD No 3, 20° PA, D+F 170, 35-54T
2 MOD No 3, 20° PA, 35-54T
2 MOD No 1, 20° PA, 135 rack, D+F 170
14 DP No 1, 1.5A
S.D.P. No 1, Bevel, D+F=360°, B.S.A. Tools Jessops R153
High-speed steel construction
Suitable for milling gear teeth on manual or CNC machines
Some cutters have protective wax, minor surface rust visible on a few
Ready for gear cutting jobs in engineering or model work

STA Machine Tool Cabinet

Skylarc Ref C168281

LISTA Premium 75 tool cabinet.
Blue steel construction.
Seven drawers.
Mounted on four blue caster wheels.
Cabinet is currently locked and no key is included.

WIA Arc Caddy Welder

Skylarc Ref V168274

Model: WIA Weldarc 180i.
Rated output: 180 amps at 18 percent duty and 76 amps at 100 percent duty.
Output voltage: 27.2V at 180 amps and 23V at 76 amps.
VRD Safe indicator and ON status lights.
Control knob for adjusting amps from 20 to 180.
Supports MMA and TIG-LIFT welding.
Manufactured by Welding Industries of Australia.
Fitted with an electrical power cord and plug.
Black and yellow plastic case.

Lista Tool Cabinet with Drawers and Wheels

Skylarc Ref T168272

Lista branded tool cabinet.
Blue steel construction.
Seven drawers with metal handles.
Each drawer features a metal perforated insert tray.
Locking mechanism with key included.
Mounted on four swivel castor wheels.
Top surface features removable black ribbed mat.
Cabinet is mobile and suitable for workshop storage.
No accessories or contents are included.

Lista Tool Cabinet with Drawers and Wheels

Skylarc Ref S168271

Manufacturer is Lista AG.
Cabinet is blue in colour.
Features two front doors with integrated handle and lock.
Key is present for the lock.
Cabinet is fitted with four caster wheels for mobility.
Top surface has a textured black mat. Interior contains five metal drawers with perforated bases.
Cabinet is freestanding and not fixed to floor or wall.
Lista AG label is present on the top front edge.

Mercer Bore Gauge

Skylarc Ref M168265

Mercer bore gauge set model 226/753/62. Made in England.
Supplied in a wooden case.
Includes dial gauge with Mercer branding.
Gauge set contains interchangeable rods and accessories as shown.
Dial gauge marked "Mercer Standard Gauge".
Instructions for use are included in the case lid.
Gauge head and mounting accessories included.

Three Phase Pantograph

Skylarc Ref J167326

GHA Alexander Model 3A Pantograph
British made by George H. Alexander Machinery Ltd
Includes two T-slot tables: 345mm x 200mm and 450mm x 320mm
Cutter head speed chart

Vintage Steel Topped Wooden Workbench

Skylarc Ref A168071

Vintage Steel Topped Wooden Workbench.
Approx 3mm thick steel top.
Wood frame with MDF doors.
Older but sturdy unit.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref P168008

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 150mm long stainless ruler by Toledo, Japan.
- 420x155x40mm sterl storage case (np lid).
Besides ruler, all other Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref O168007

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 150mm long stainless ruler by Toledo, Japan.
- 420x155x40mm sterl storage case (np lid).
Besides ruler, all other Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref J168002

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm sterl storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref N168006

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 150mm long stainless ruler by Toledo, Japan.
- 420x155x40mm sterl storage case (np lid).
Besides ruler, all other Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref M168005

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 150mm long stainless ruler by Kristeel
- 420x155x40mm sterl storage case (np lid).
Besides ruler, all other Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref L168004

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 150mm long stainless ruler by Vertex.
- 420x155x40mm sterl storage case (np lid).
Besides ruler, all other Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref K168003

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper by Vertex
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 150mm long stainless ruler by Deli
- 420x155x40mm sterl storage case (np lid).
Tools are of unknown manufacturer.unless otherwise stated.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref I168001

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm sterl storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref Z168200

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref Y168199

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref X168198

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref W168197

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref V168196

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref U168195

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref T168194

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Set of Precision Engineering Measuring Tools, Calipers, Micrometers, & More

Skylarc Ref S168193

Set of Precision Engineering Measuring Tools.
Set was used for many years in a University engineering workshop classroom.
Set includes:
-200mm Analog Vernier caliper
- 0-25mm outside Micrometer.
- 25-50mm outside Micrometer.
- 128x80mm Precision square.
- 420x155x40mm steel storage case (no lid).
Tools are of unknown manufacturer.
Well maintained units.
See our other listings for more of these classic Measuring sets.

Vintage Wooden Workbench

Skylarc Ref Y167965

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref X167964

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref W167963

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref V167962

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref S167959

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref P167956

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref O167955

Vintage Wooden Workbench.
90x45mm wood board frame with wood thick MDF board top.
Plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref N167954

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref M167953

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref L167952

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref K167951

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Vintage Wooden Workbench

Skylarc Ref J167950

Vintage Wooden Workbench.
90x65mm wood board frame with wood 40mm thick wood board top.
100mm high plywood backsplash.
Workbench has been used for decades in a University classroom workshop setting.
Sturdy vintage unit.
See our other listings for more of these workbenches.

Koike Sanso IK-12 Max-II Track Oxi Cutter

Skylarc Ref Q168087

Koike Sanso IK-12 Max-II Track Oxi Cutter.
Includes 1800mm long straight track.

Vintage Wooden Workbench w/ Steel Top & Record Vice

Skylarc Ref D168074

Vintage Wooden Workbench w/ Steel Top & Record Vice.
Approx 3mm thick steel sheet top.
Wood board, plywood, and MDF frame and walls.
English made Record No.84 bench vice included.
Work surface 805mm above floor.

DeWalt 125mm Corded Angle Grinder DWE4151

Skylarc Ref K168055

DeWalt 125mm Corded Angle Grinder.
Model No. DWE4151
Includes side handle and original box.
Disk changing tool is missing.
Tool had been electrical tested but appears never actually used.

2x Magnetic Parrallel Bar Sets by Eclipse

Skylarc Ref Z168018

2x Magnetic Transfer Parrallel Bar Sets.by Eclipse
Steel and brass construction.
One set is 75x60x30mm.
Second set is 75x61x31mm.
Wood cases.

Vintage Brass Reverse Letter / Number Plates + Steel Stamps

Skylarc Ref O168033

Assorted Vintage Brass Reverse Letter / Number Plates + Steel Stamps.
3x 420x285mm wooden trays with Brass Number and letters in 20mm size for capital letters and 14mm for lower case.
1x wood tray with steel letters and numbers 40mm high.
1x empty wood tray.
Also includes 3x packs of steel letter and number stamps in sizes of 3mm and 6mm.
Condition varies with each unit.

8x Rugged Stools

Skylarc Ref R167958

Set includes 8 stools
Each stool measures approximately 420x420mm at the base
Each seat measures approximately 350x350mm
Approximate height for each stool is 705mm
Seats constructed from MDF board with green finish
Legs are 30x30mm tube steel
Previously used in a university workshop classroom setting

8x Rugged Stools

Skylarc Ref Q167957

8x Rugged Stools.
Each stool is approx 420x420mm at base and 350x350mm at seat.
Heights of approx 705mm.
7x with Seats are MDF board in green finish, plus 1x with padded cloth seat.
7x stools 30x30mm tube steel legs, plus 1x stool with 20mm steel tube legs.
Previously used in University workshop classroom setting.

Bench Vice

Skylarc Ref U167389

Engineers bench vise
130mm maximum jaw opening
150mm wide steel jaws
Bolt-down round base with three mounting holes
Robust cast iron body construction
Manual screw action for secure clamping
Used condition, shows general surface wear and marks consistent with workshop use
Suitable for general metalworking, maintenance, and fabrication tasks

Workshop Cabinet and Contents

Skylarc Ref S167387

Mobile cabinet with MDF shelves and doors, steel frame construction
Robust steel frame for added strength and durability
Fitted with four swivel castor wheels for easy mobility
Two front doors with simple round metal handles
Interior features two MDF shelves for organised storage
Cabinet exterior is painted black, shows surface marks and signs of workshop use
Approximate dimensions: Height 88cm, Width 61cm, Depth 48cm (measured from photos)
Ideal for workshop, garage, or utility storage
Contents of aluminum

Workbench Table w/ Record 35P Bench Vice

Skylarc Ref I167949

Workbench Table.
40x40mm box steel frame.
MDF board top and lower surfaces.
English made Record No.35P Bench Vice included.

Pair of Steel Long Material Support Rack Frames

Skylarc Ref H167948

Pair of Steel Long Material Support Rack Frames
Each frame is approx 2140mm tall, 770mm deep at base, 320mm deep at top.
Each level brace is 225mm long.
Vertical spacing between levels varies from 145mm to 245mm.
Bolts for securing to floor and wall NOT included.

Luxcut Drill Bit Grinder

Skylarc Ref Q167385

Luxcut Drill Bit Grinder DG 20
Item No: 310 0020
Single phase, 230V, 50Hz motor
Adjustable speed up to 7,500 rpm
Suitable for grinding standard, hard, and soft drill bits
Point angles: 118°, 130°, 140° depending on material
Grinds steel, cast iron, cast steel, Al-alloys, CuZn-alloy, austenitic steel, magnesium alloy, zinc-alloy
Comes with robust clamping and adjustable holders
Emergency stop for safety
Compact, bench-top design
Well-labeled settings guide on front panel
Supplier: Scott Machinery, Christchurch, New Zealand
Condition visibly used with signs of cosmetic rust and dust on holders and base

Record No.6 Bench Vice

Skylarc Ref G167947

Record No.6 Bench Vice.
Made in England.
Opens easily.
Well maintained.
Previously used in educational workshop.

3 x 25mm Lathe Turning Tools

Skylarc Ref L167380

Set of 3 turning tool holders, shank size 25x25mm
Includes: Sandvik Coromant T-Max U SVVBN 2525 M16 holder, Seco PTJNR 2525 M16 holder, and one THR34-M4 holder
Industry-standard 25mm shank size fits most lathes
Brands: Sandvik Coromant, Seco, and unbranded/THR type
Accepts carbide inserts (not included)
Visible signs of use with cosmetic wear (see photos)

3 x 25mm Lathe Turning Tools

Skylarc Ref K167379

Set of 3 turning tool holders for lathe use
All are 25mm shank size
SECO PTJNR2525M16 tool holder
Iscar PCLNR 2525M-09X tool holder
Iscar MWLNR 2525M-08W tool holder
Visible signs of use

Assorted Handtools

Skylarc Ref C168099

Assorted Handtools.
Screwdrivers Hammers Pliers, vice grips, files, hex keys and other assorted handtools.
Condition varies greatly with each Tool.

16x Welding Masks by PowerCraft

Skylarc Ref D168100

16x Welding Masks by PowerCraft.
Unknown model numbers or glass lens type.
Overall good conditions with some having mild surface dust.
16x masks in auction.

Assorted Tool Tips

Skylarc Ref I167377

11 assorted part boxes of indexable carbide tool tips and inserts
Brands visible include Iscar, Sandvik Coromant, SECO, Mircona, and Master
Various shapes and sizes, including triangular, diamond, and rectangular profiles
Some tips are coated carbide for turning, milling, or parting applications

2 x Keyless Drill Chucks

Skylarc Ref G167375

Two Jacobs keyless drill chucks included
MT5 (Morse Taper 5) with 3-16mm Jacobs chuck
MT3 (Morse Taper 3) with 1.5-13mm Jacobs chuck

Large Lot of Drill Bits

Skylarc Ref F167374

Assorted partial drill bit sets in metal cases
Mixed sizes ranging mostly from 1mm up to larger diameters 18mm
Multiple standard metric sets – some drilled slots empty
Includes additional loose and random drill bits, various lengths and diameters
Condition varies: some bits have visible wear, others are lightly used or new
One large drill bit in sealed packaging
See photos for exactly what is included in this lot

Taps, Handles and Countersinks

Skylarc Ref D167372

Tap handle and die stock set, includes 3 heavy duty handles (various sizes)
Partial metric tap sets in Trade Tools Ltd plastic stands
Multiple hand taps and spiral point taps, selection is incomplete (some positions empty, see photos)
Countersink set in plastic box, sizes 2–5mm, 10–15mm, 15–20mm (one size missing from set, see photos)
Some general signs of use, overall good condition
Everything shown in photos is included

Jetline Engineering Tungsten Electrode Grinder TEG-1A, Faulty

Skylarc Ref U168091

Jetline Engineering Tungsten Electrode Grinder.
Model No. TEG-1A
Appears to have some kind of fault per label by switch. Will need servicing.

Assorted Mill Lockdown Accessories

Skylarc Ref C167371

Two partial mill lockdown/clamping sets included
Both sets include assortment of T-nuts, studs, step blocks, clamps, and nuts
Also includes an additional bin of mixed studs, bolts, nuts, T-nuts, washers, and miscellaneous clamping pieces
Ideal for use with milling machines and workholding
Items are in used condition, showing typical signs of shop use

3 x Drill Chucks

Skylarc Ref A167369

Set of 3 drill chucks with Morse tapers
16mm keyless chuck with MT3 taper
13mm keyed chuck with MT2 taper
13mm keyed chuck with MT2 taper and MT3 adapter, includes two chuck keys
See photos for detailed condition and included accessories

Vintage Workshop Drawer Cabinet

Skylarc Ref N168084

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Laminated MDF top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref S168089

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Galvanised sheet steel top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref R168088

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Galvanised sheet steel top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref O168085

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref M168083

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Painted board top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref L168082

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Laminated MDF top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref K168081

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Laminated MDF top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref J168080

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Laminated MDF top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref I168079

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Laminated MDF top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref H168078

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref G168077

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Laminated MDF top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Vintage Workshop Drawer Cabinet

Skylarc Ref F168076

Vintage Workshop Drawer Cabinet.
Wood and plywood construction.
Laminated MDF top.
Previuosly used for decades in a Uni classroom workshop.
See our other listings for more of these vintage but sturdy units.

Wooden Cabinet and Contents

Skylarc Ref R167360

Workshop cupboard with contents included
Solid wooden construction with metal top
Two drawers containing miscellaneous hand tools, drill bits, fittings and hardware
Two swing doors below with internal shelving
Contents on shelves include various fasteners, oils, hoses, metal parts, and miscellaneous workshop items
Top surface equipped with two BT30 tool setters (one marked BT30-TBS-2) and a steel cylinder
Exterior and top show cosmetic wear typical of workshop use
Ideal for workshop storage and organising tools and parts
All visible items in photos included

Small Mill Vice

Skylarc Ref P167358

Heavy-duty machine vice suitable for workshop or milling use
90mm wide jaws for secure clamping
75mm maximum jaw opening
Solid cast iron body construction
Precision machined jaw faces for strong grip
Angle mechanism

6-Door Storage Locker Cabinet

Skylarc Ref Y168069

6-Door Storage Locker Cabinet.
Wood and MDF construction.
All doors have locks, one key is included that works on all..
Cabinet is sitting on a detached steel support frame 375mm tall.
Each inner compartment is approx 490x415x365mm.

Bosch Knibbler

Skylarc Ref K167353

Bosch GSC 2.8 electric knibbler
500W motor, 240V, 2.8mm cutting capacity
No-load speed 2400 min⁻¹
Suitable for cutting sheet metal and corrugated materials
Industrial quality, made in Germany
Model number: 0 601 506 137

CutWeld Argon Gas Regulator, New

Skylarc Ref E168049

CutWeld Argon Gas Regulator & Flowmeter
Model: 101-25FL
Suitable for Argon gas applications
Brass housing construction for durability
Includes pressure gauge (0–20,000 kPa) and flowmeter (0–25 l/min)
Clear “ARGON” flowmeter control knob with open/close markings
Unit is new, never used, and comes in the original box
Dated 26/11/96 on packaging
All components as shown in photos

Welding Beatle Unit

Skylarc Ref C168047

Welding Beatle Unit.
Unknown brand and model.
Measures approx 370x230x230mm.
450mm adjustable welding torch clamp rail.
See photos for drive type.
Single phase.

Record No.84 Bench Vice

Skylarc Ref A168045

Record No.84 Bench Vice.
Made in England
115mm jaws.

Lincoln Electric EasyArc Stick Electrodes, 3.2mm, 4.5kg Box

Skylarc Ref W168041

Lincoln Electric EasyArc Stick Electrodes.
Code No.7016
3.2mm x 350mm.
New unopened 4.5kg Box

Record No.34 Bench Vice

Skylarc Ref Z168044

Record No.34 Bench Vice.
115mm jaws.
Made in England.

Record No.35P Bench Vice

Skylarc Ref Y168043

Record No.35P Bench Vice.
Made in England.
130mm jaws.

Assorted Welding Accessories, Supplies, Safety Gear

Skylarc Ref X168042

Assorted Welding Accessories, Supplies, Safety Gear.
Leather gloves, welding screen, 3x electrode holders, welding goggles and masks, spare welding mask glass and mask padding strips, Assorted regulators, and more.
Most items are as new unused used leftover stock. A few show some light usage.

8" Bench Grinder

Skylarc Ref P167332

Heavy Duty Bench Grinder, Model BG-8
1/2 HP motor, 8” grinding wheels
2850 RPM, 220V, 4A, single phase, 50Hz
All ball bearing construction for long service life
Sturdy base and robust metal construction
Clear adjustable safety shields fitted to each wheel
Made in Taiwan
Condition shows surface wear to paint, wheels in good usable shape

4x Small Steel Scrap Metal Trolley Bins

Skylarc Ref K168029

4x Small Steel Scrap Metal Trolley Bins.
Each is approx 610x340x395mm.
End handles for lifting.
All roll ok.
Ome denting and rust from usage

Big New Baby Chuck ER25 Collet Set

Skylarc Ref A168019

Big New Baby Chuck ER25 Collet Set.
Metric Sizes from 3mm to 12.5mm
Wood case.
Made in Japan by Daishowa Seiki Co. Ltd.
Collets appear unused. Wood case exterior shows storage wear.
One Collet is missing.

TOS Milling Machine Indexing Head

Skylarc Ref E167321

TOS Type DU25
160mm three jaw chuck
Tail stock
Very tight, needs freeing up

3 Phase Plasma Cutter

Skylarc Ref T167908

Nertajet Zip SAF
Three phase

Single Phase Demagnetizer

Skylarc Ref T167310

Esec brand
Single phase
5 amp

Set of Vintage Gauge Blocks

Skylarc Ref W168015

Set of Vintage Gauge Blocks.
Unkmoen English manufacturer.
Appears to be Imperial sizes.
Wood case.
Some blocks are missing see photos

Vintage Marui Keiki Bevel Protractor BP-301 in Wood Case

Skylarc Ref V168014

Vintage Marui Keiki Bevel Protractor.
Model No.BP-301
Includes wood case.
Made in Japan.
Age unknown.
Appears unused, or very well maintained. Some accessories are still in plastic.
Wood case exterior shows storage wear.

Eclipse Magnetic V-Block No.934

Skylarc Ref Q168009

Eclipse Magnetic V-Block.
Cat No.934
100x70x95mm.
Made in England.
Functions as it should.

2 x Partial Punch Sets

Skylarc Ref O167305

Brent Components punch/die sets in metal storage cases
Stock No. 5513/90 – 3mm to 12mm capacity, U.K. made
Stock No. 5517/90 – 12.5mm to 27.5mm capacity, U.K. made
Each set includes a variety of punches, dies, bolts, and accessories, but neither is complete
Components show signs of use and surface rust; cases are worn, one with significant paint loss
Ideal for spare parts, workshop use, or supplementing existing sets
Brent Components Ltd, London NW10, quality British engineering

Small Milling Machine Vice

Skylarc Ref N167304

Engineer’s mill vice
100mm wide jaws
125mm maximum opening capacity
Solid cast iron body with two long mounting slots for stable bench attachment
Missing rod for handle

Assorted Mill Cutters

Skylarc Ref W167911

Lot of 16 metal slitting and milling cutters, High Speed Steel (HSS) and cobalt, mixed brands including Dormer and B&S.
Various sizes and angles including 2-3/4" x 1/2" x 1", 100 x 1.6 x 25.4mm, 53°R, 60°R, 80°L, 45° RH/LH, and 90°
Includes one new Okazaki Seiko Co. 100 x 1.6 x 25.4mm cobalt metal slitting saw (56 teeth, made in Japan)
Selection covers both left and right hand, and some are marked with specific angles (e.g. 45°, 53°, 60°, 80°, 90°)
Condition varies: some unused or lightly used, some show surface oxidation

Quick Change Lathe Tool Post

Skylarc Ref P168190

100mm x 100mm lathe tool post
Includes 5 matching tool holders
Quick-change style system for efficient tool swapping
Robust steel construction for durability
All fixing bolts and adjustment screws present
Used condition with visible cosmetic wear from workshop use

Cast Engineering Table

Skylarc Ref T168298

Windley Bros Crown Works
No handles

Cast Engineering Table

Skylarc Ref S168297

Missing one handle
Cover

2 x NT50 Tool Holders

Skylarc Ref F168180

NT50 to MT3 adapter with 13mm drill chuck
ER32 Collet chuck

Taper Adapters and Drifts

Skylarc Ref C168177

Morse taper adapter sleeves set
13 x MT3-MT2 adapters
16 x MT2-MT1 adapters
9 x drill drifts
Suitable for various lathe and drilling machine setups
Used condition with some paint wear visible
See photos for exact items included

Meltview Welding Camera

Skylarc Ref A168175

MeltTools MeltView APEX welding camera
Professional camera for weld monitoring and inspection
Model: MeltView APEX, Made in the USA
Serial number: 2115-0008
Rugged foam-lined protective carry case included
Adjustable clamp mount arm
Includes assorted accessories and spare covers as shown
Designed for close-up observation of welding processes
Compact, robust build for industrial environments
All items shown in photos are included
Condition appears very good with minimal signs of use

Assorted Lathe Tooling

Skylarc Ref V168170

Set of 6 lathe tool holders with carbide inserts
Models included:
SECO TOOLS MTJNL-2020-16, made in Denmark
MIRCONA R152S-2020x12x3/40-50 (2 identical holders)
SECO PTJNR2525M16
KENNAMETAL SDNCN 1212 N07
One unbranded or obscured blue tool holder
Suitable for CNC or manual lathe use
Condition as shown, some cosmetic wear from use

Measuring Equipment

Skylarc Ref S168167

Large lot of measuring tools for workshop use
Includes 11 General and Giroz stainless steel protractors with adjustable arms
Steel rulers of various lengths, most
3 combination squares with spirit levels
2 engineer’s try squares
1 large steel square with yellow edge
Tools appear in good used condition with clear markings

6 x Boring Bars

Skylarc Ref R168166

Set of 6 used internal turning/boring bars for lathe machining
Models include:
S16Q CTFPR 11, 20 Ø min. Carboloy
Microna R533-225-16 (x4 units)
Additional model markings: LJ7006-84
All tools appear to use indexable inserts (some inserts fitted, condition varies, see photos)
Hexagonal shank design
Previously used, with cosmetic wear and markings from use, as shown

Gas Analysis System

Skylarc Ref K168289

ADC gas analyser system type WA 356. Serial number 2.
Voltage 240V 50Hz.
Carbon Dioxide Analyser
Nitric Oxide Analyser
Hexane Analyser
Carbon Monoxide Analyser
All analyser modules display analogue meters and calibration controls. Includes a Sybron Taylor Servomex O2 Analyser 570A. Rear panels show mains input and remote/local switch options. Units include handles for rack mounting or bench use.
Unknown if complete

GMF 200mm Heavy Duty Bench Grinder

Skylarc Ref E168283

GMF 200mm heavy duty bench grinder.
Bench mounted on a fixed metal pedestal stand.
Equipped with two grinding wheels.
Each wheel has an adjustable protective shield.
Fitted with a central emergency stop switch.
Motor label indicates RPM 2850.
Powered by standard mains plug.

Double Ended Bench Grinder

Skylarc Ref D168282

Bench grinder with two grinding wheels installed.
Wheel diameter is 200mm.
Single phase electric motor.
Power rating and rpm are unknown.
Fitted with clear safety shields.
Base has mounting holes for bench attachment.
Power switch located on front of base.
No branding or model number visible.

Large Lot of Lathe Boring Bars

Skylarc Ref O168267

Set includes 23 boring bars.
Each boring bar has a 10mm diameter.
Boring bars are pictured with a wooden storage block
Cutting tips and shank condition as shown in photos.
No manufacturer markings identified in the images.

Mercer Bore Gauge

Skylarc Ref L168264

Mercer bore gauge set model 7822/703.
Made in England. Gauge includes analog dial indicator.
Indicator marked in 0.0001 inch increments.
Supplied in fitted wooden case. Includes gauge rods marked .861 inch, .911 inch, .961 inch, 1.011 inch, 1.061 inch, 1.111 inch, 1.171 inch.
Set contains various accessories and attachments as shown.
Metal identification plate present on exterior of case.

Vernier Calipers and Micrometers

Skylarc Ref K168263

Set includes two Mitutoyo vernier calipers.
Calipers are made in Japan.
Set includes four micrometers with two identified as 0-25mm range.
One black micrometer is labeled No. 436-25mm.
Micrometers have knurled adjustment barrels.
9 micrometer adjustment spanners.

Smiths Portable Mechanical Tachometer Set

Skylarc Ref I168261

Smiths mechanical tachometer with dial displaying 0-400 RPM, 0-2000 RPM, and 0-10000 RPM ranges.
Range selection is set by red arrow on central dial knob.
Set includes main tachometer unit, interchangeable rubber and metal driving centre attachments, additional extension shaft, and metric/footage wheels.
Lock and pointer reset buttons are present on the housing.
Adjustment for zero is provided at the back of the case.
Directions for use are mounted inside the case.
Supplied in original hard storage case with fitted compartments.

Briggs & Stratton Intek IC 305 10HP OHV Engine

Skylarc Ref H168260

Briggs & Stratton engine model Intek IC 305.
Overhead valve (OHV) design.
Rated at 10 horsepower.
Cast iron sleeve.
Pull start mechanism.
Equipped with fuel tank and air filter assembly.
Build date marked as 01 09.
Engine only, no additional attachments or accessories included.
Low oil sensor visible.
Shaft and mounting points visible in photos.
Hasn't been started but has good compression

Kemppi Super Kempak ARC Welder

Skylarc Ref G168259

Kemppi Super Kempak model No 6121234.
Manufactured in Finland.
Supplied by Migomag New Zealand Limited.
Power rating 5A/10V to 150A/16V and 5A/20V to 150A/26V.
Input voltage options: 220V and 240V at 50Hz 16A, 380V and 415V at 50Hz 10A. Maximum output current 150A.
IP22 rating. Insulation class H. ISO 700 certified.
VDE 0542 compliant.
Includes attached welding cables and connectors. Mounted on wheeled frame.

Lathe Dollies and Trolley

Skylarc Ref F168258

Lathe shifting dollies designed for TOS SN40C lathe.
Overall dolly length is 1310mm.
Distance between wheel gap is 800mm.
Trolley dimensions are 650mm x 530mm x 570mm tall.
Dollies have four red heavy-duty wheels.
Green steel frame construction.
Trolley has two tiers and four swivel blue and grey wheels.
Includes welded steel supports and adjustment rods.
No additional accessories included.

Assorted Hand Tools with Red Metal Toolbox

Skylarc Ref N168162

Includes a red metal toolbox with internal trays
Contains various spanners and wrenches.
Multiple adjustable wrenches included.
Selection of combination and open-ended spanners.
Features several pairs of pliers and side cutters.
Vice grip locking pliers present. Two G-clamps included.
Set of socket attachments visible.
Assorted screwdrivers included.
Contains several hammers and mallets. Multiple hacksaws included.
Files and rasps present in the tray.
Includes measuring and marking tools.
Small Unbrako allen key set included.
Socket tray contains multiple sockets of various sizes.

Assorted Mill Lockdown Accessories

Skylarc Ref M168161

Steel box containing an assortment of machinist clamps and fixture hardware. Includes various T-slot nuts, bolts, and clamps. Four small C-clamps are present. Selection of slotted blocks included. Two larger clamp rings with screw mechanisms included. Several assorted threaded fasteners and rectangular hardware pieces in steel box. Steel box with latch missing.

BOC Oxy Acetylene Welding and Cutting Kit

Skylarc Ref L168160

BOC handle with control valves is included.
Oxygen and acetylene regulators BOC 8000 series are fitted.
Two pressure gauges per regulator.
Oxygen and acetylene hoses are included.
Hoses marked for oxygen and acetylene use.
Cutting torch attachment is included.
Brass fittings are present on all connections.

Assorted Hand Tools Lot

Skylarc Ref K168159

Includes multiple hand files with plastic and wooden handles. Includes several metal C-clamps and F-clamps. Includes various hammers with wooden and composite handles. Includes several grease guns. Includes two crimping tools with plastic grips. Includes one unopened KS-23 air blower. Includes various small brushes. Includes a blue toolbox tray with assorted items and gloves. Includes a box of additional hand files. Includes miscellaneous hand tools such as wrenches and pliers.

CIG Pipe-Mate Gas Cutting Machine

Skylarc Ref E168257

CIG Pipe-Mate gas cutting machine visible on identification label.
Manual hand-crank operation.
Brass gas control valves with red caps. Four-wheel base for movement.
Gear and rack mechanism for guided travel. Blue metal construction with various adjustment knobs.
Spring-loaded mechanism above central body.
Designed and made in Australia.
No accessories or hoses included in images.

Steel Welding Table

Skylarc Ref J168158

Steel work table with rectangular top.
Table surface divided into two sections.
One section features metal plates.
Table includes metal lip around perimeter.
Mounted on a single green pedestal with wide metal base.
Four supports extend from pedestal base. Surface shows metal debris from previous use.
Suitable for workshop or industrial environment.

Wide Dual Gas Bottle Trolley

Skylarc Ref U167961

Wide Dual Gas Bottle Trolley.
Lifting base plate 600x310mm.
260mm diameter solid rubber wheels.
Rolls easily.

6x Nuweld 150mm G-Clamps

Skylarc Ref F167946

6x Nuweld 150mm G-Clamps.
All previously used in University educational workshop.
Condition varies with each unit.

5x Assorted G-Clamps

Skylarc Ref E167945

5x Assorted G-Clamps.
Includes:
Nuweld 300mm
Nuweld 200mm
Nuweld 150mm
Nuweld 50mm
Unknown brand 200mm (missing threaded rod end cap).
Condition varies with each unit.

7x Lincoln Electric PowerCraft Welding Masks, New

Skylarc Ref A168097

7x Lincoln Electric PowerCraft Welding Masks.
Specific model unknown.
Also includes 13x new spare padded mask head brackets, see last photos.
All are new unused units.

SmoothFlame Cutting & Welding Kit

Skylarc Ref Z168096

SmoothFlame Cutting & Welding Kit.
See photos for included components as some original parts appear to be missing.

Assorted Welding Supplies, Accessories, Attachments

Skylarc Ref P168086

Assorted Welding Supplies, Accessories, Attachments.
See photos for details on includes items.
Co edition varies with each unit.

WIA Argon Gas Welding Regulator, New

Skylarc Ref X168068

WIA Argon Gas Welding Regulator.
Suitable for argon gas use.
Twin gauge design for accurate pressure and flow readings
Pressure gauge marked up to 400 bar / 6000 psi (BS EN 562 standard)
Flow gauge marked up to 100 litres/minute (EN 562 standard)
20mm gas inlet connection
Robust brass body construction with easy-grip control knob
Clear "open/close" direction on adjustment knob
New and unused condition
Model number not indicated
See our other listings for more of these New regulators.

WIA Argon Gas Welding Regulator, New

Skylarc Ref W168067

WIA Argon Gas Welding Regulator.
Suitable for argon gas use.
Twin gauge design for accurate pressure and flow readings
Pressure gauge marked up to 400 bar / 6000 psi (BS EN 562 standard)
Flow gauge marked up to 100 litres/minute (EN 562 standard)
20mm gas inlet connection
Robust brass body construction with easy-grip control knob
Clear "open/close" direction on adjustment knob
New and unused condition
Model number not indicated
See our other listings for more of these New regulators.
Photos are indicative.

WIA Argon Gas Welding Regulator, New

Skylarc Ref U168065

WIA Argon Gas Welding Regulator.
Suitable for argon gas use.
Twin gauge design for accurate pressure and flow readings
Pressure gauge marked up to 400 bar / 6000 psi (BS EN 562 standard)
Flow gauge marked up to 100 litres/minute (EN 562 standard)
20mm gas inlet connection
Robust brass body construction with easy-grip control knob
Clear "open/close" direction on adjustment knob
New and unused condition
Model number not indicated
See our other listings for more of these New regulators.
Photos are indicative.

WIA Argon Gas Welding Regulator, New

Skylarc Ref S168063

WIA Argon Gas Welding Regulator.
Suitable for argon gas use.
Twin gauge design for accurate pressure and flow readings
Pressure gauge marked up to 400 bar / 6000 psi (BS EN 562 standard)
Flow gauge marked up to 100 litres/minute (EN 562 standard)
20mm gas inlet connection
Robust brass body construction with easy-grip control knob
Clear "open/close" direction on adjustment knob
New and unused condition
Model number not indicated
See our other listings for more of these New regulators.
Photos are indicative.

WIA Argon Gas Welding Regulator, New

Skylarc Ref R168062

WIA Argon Gas Welding Regulator.
Suitable for argon gas use.
Twin gauge design for accurate pressure and flow readings
Pressure gauge marked up to 400 bar / 6000 psi (BS EN 562 standard)
Flow gauge marked up to 100 litres/minute (EN 562 standard)
20mm gas inlet connection
Robust brass body construction with easy-grip control knob
Clear "open/close" direction on adjustment knob
New and unused condition
Model number not indicated
See our other listings for more of these New regulators.
Photos are indicative.

Able Cooke Blind Rivet Pliers SR1, New

Skylarc Ref V168040

Able Cooke Blind Rivet Pliers.
Model SR1.
New in unopened packaging. Packaging is dirty from Workshop storage.

3-Jaw 125mm Dia Lathe Chuck by Burnerd

Skylarc Ref U168013

3-Jaw 125mm Dia Lathe Chuck by Burnerd.
Made in England.
ID plate worn so model number unknown.
126mm outer diameter.
Centre bore approx 33mm diameter.
Approx 68mm thick body.
Chuck key is missing.
3x mounting bolt holes spaced 60mm appart on centre.

2x Pairs of Magnetic Link Welding Clamps by Bugo Systems

Skylarc Ref S168011

2x Pairs of Magnetic Link Welding Clamps by Bugo Systems.
Made in USA by Weld Tooling Corp.
255mm length of each set.

10x Small Precision Squares

Skylarc Ref R168010

10x Small Precision Squares.
7x squares 185x110mm. One square has ledgible markings and is a Moore & Wright No.409 square.
3x Squares are 128x80mm. One of these has a a Groz brand stamp on it.

7x Thread Gauge Sets

Skylarc Ref Q168191

7x Thread Gauge Sets.
Six are MeasuMax 1mm to 10.7mm sets.
The 7th slightly longer set has iledgible markings.

Assorted Welding Wire

Skylarc Ref Y168095

Assorted Welding Wire.
Includes:
- BOC Aluminium MIG wire No.4043, 1.2mm, 8kg full roll weight, roll appears near full.
- 2x Rolls of Weldwell copper coated MIG wire 0.9mm, 15kg when full, both rolls appear full or near full.
- 2x Rolls of Lincoln Electric UltraMag S6 0.9mm copper coated wire, 5kg when full one roll appears approx 90% full, other approx 25% full.
- WIA 0.8mm ES6 mild steel MIG wire, 0.9kg full roll.

Workshop Workbench Table

Skylarc Ref T168090

Workshop Workbench Table.
40x40mm box steel frame.
25mm plywood top.
Appears to have been custom extended.
Items seen on table not included.

4x Outside Micrometers

Skylarc Ref R168192

4x Outside Micrometers.
All are unknown manufacturer.
2x are 0-25mm.and 2x are 25-50mm.
Three in good condition, one average as its missing part of its dial cylinder.

Weldwell 2.5mm General Purpose Welding Electrodes

Skylarc Ref D167944

Weldwell general purpose arc welding electrodes
Size: 2.5mm.
300mm lengths.
Suitable for welding mild steels in all positions
Net weight 12.5kg
Batch number: 1000938 PH2825
Classifications: AS/NZS 4858 E4313A, AWS A5.1 E6013
Manufactured under a certified ISO 9001 quality system
Made in New Zealand
New unopened box.

Assorted Workshop Hand Brushes & Steel Dust Pans

Skylarc Ref W168093

Assorted Workshop Hand Brushes & Steel Dust Pans.
28x corse hair dusting brushes with wood handles. Wear varies greatly with each brush.
15x custom made steel dust pans in varying sizes. Likely made by Uni students and/or staff. (three units not seen in photos as they were found afterwards.).

Europlan Steel Office or Workshop Storage Cabinet

Skylarc Ref U168039

Europlan Steel Office or Workshop Storage Cabinet.
Lockable, key is missing.
Contents not included.

Europlan Steel Office or Workshop Storage Cabinet

Skylarc Ref T168038

Europlan Steel Office or Workshop Storage Cabinet.
Lockable, key is included.
Contents not included.

Workshop Storage Shelving Rack

Skylarc Ref N168032

Workshop Storage Shelving Rack.
40x40mm box steel frame with 25mm thick plywood shelves.

Workshop Storage Shelving Rack

Skylarc Ref M168031

Workshop Storage Shelving Rack.
40x40mm box steel frame with 25mm thick plywood shelves.
Contents on shelves not included.

Workshop Storage Shelving Rack

Skylarc Ref L168030

Workshop Storage Shelving Rack.
40x40mm box steel frame with 25mm thick plywood lower two shelves and MDF top shelf.
Contents on shelves not included.

Mobile Shelf Trolley

Skylarc Ref I168027

Mobile Shelf Trolley.
25x25mm box steel frame with MDF shelves and walls on two sides.
125mm Diameter castors.
Rolls easily.

Workshop Table w/ Galvanised Top

Skylarc Ref G168025

Workshop Table w/ Galvanised Top.
40x40mm box steel frame with 25mm plywood top with 1mm galvanised sheet steel cover.
Items seen on table are not included.

Steel Workshop Cabinet by Precision

Skylarc Ref E168023

Steel Workshop Cabinet by Precision.
Lockable, key is missing.
Adjustable shelves.

Steel Workshop Cabinet by Precision

Skylarc Ref C168021

Steel Workshop Cabinet by Precision.
Lockable, key is missing.
Adjustable shelves.

Lincoln Electric 2.5mm EasyArc Stick Electrodes

Skylarc Ref C167943

Lincoln Electric EasyArc 7016 stick electrodes.
Size: 2.5mm x 350mm.
Net weight: 13.5kg.
Suitable for welding in 1G, 2G, 2F, 3G, and 4G positions.
Conforms to AWS A5.1 E7016, AS/NZS 4855-B E4916A.
Approvals: ABS, LR, CCS.
Part number: 70162550
Lot number: 4517
New unopened box.

Lincoln Electric 2.5mm EasyArc Stick Electrodes

Skylarc Ref B167942

Lincoln Electric EasyArc 7016 stick electrodes.
Size: 2.5mm x 350mm.
Net weight: 13.5kg.
Suitable for welding in 1G, 2G, 2F, 3G, and 4G positions.
Conforms to AWS A5.1 E7016, AS/NZS 4855-B E4916A.
Approvals: ABS, LR, CCS.
Part number: 70162550
Lot number: 4517
New unopened box. Tear in cardboard in one corner of box.

Assorted Welding Rods

Skylarc Ref X168094

Assorted Welding Rods.
Arc and TIG Welding varieties.
Bronze Aluminium, Tungsten a d other metals.
Amounts vary per package.
Previously used in a Uni educational classroom workshop.

Vintage Wooden Drawer Cabinet

Skylarc Ref E168075

Vintage Wooden Drawer Cabinet.
Wood and wood Veneer construction.
Vintage English made brass lock mechanisims on five drawers (sixth drawer missing mechanism).
Vintage keys are missing.
One drawer is missing handle.
Used for many decades in a Uni workshop classroom environment.
Sturdy Vintage unit.

Office Shelving Unit

Skylarc Ref B168072

Office Shelving Unit.
Laminated MDF construction.
Each shelf square is 375x385x335mm.

Office Shelving Unit

Skylarc Ref S168037

Office Shelving Unit.
Laminated MDF construction.
Each shelf square is 375x385x335mm.
Contents not included.

Mobile Shelf Trolley

Skylarc Ref J168028

Mobile Shelf Trolley.
25x25mm box steel frame with laminated MDF shelves.
Items seen on top shelf not included.

Steel Workshop Cabinet

Skylarc Ref D168022

Steel Workshop Cabinet.
Lockable, key is missing.
Adjustable shelves.
Some denting, finish wear, rust along bottom.

Office Shelving Unit

Skylarc Ref R168036

Office Shelving Unit.
Laminated MDF construction.
Each shelf square is 375x385x335mm.
Contents not included.

9x Assorted Small Oiling Pump Applicators

Skylarc Ref T168012

9x Assorted Small Oiling Pump Applicators.
Condition varies with each unit.
Most are empty.

Leather Welding Gloves, 11x Pairs

Skylarc Ref B168098

11x Pais of Leather Welding Gloves.
Unknown manufacturer.
Labeling shows EN388 and 4143
Sizes unknown.
Condition varies with each glove.
Previusly used in Uni classroom workshop.

Small Trolley Frame

Skylarc Ref H168026

Small Trolley Frame.
25x25x4mm angle steel frame with 50mm diameter castors, two with wheel locks.
Measures 475x275x98mm.
Inner frame dimensions approx 465x265mm.
Good multi purpose Trolley frame for holding welding units, or any other small workshop machine that can fit.

Steel Workshop Cabinet by Steelcase

Skylarc Ref F168024

Steel Workshop Cabinet by Steelcase.
Adjustable inner shelves.
Door locking mechanisim and handle are missing.

Archer Style Tapping Chuck

Skylarc Ref F167322

Archer style tapping chuck with MT3 (Morse Taper 3) shank
Heavy-duty metal body with red finish
Manual lever action for precise tap control
Chuck head features a knurled grip and dual set screws for secure tool holding
Japanese manufacture, plaque shows model K-21
Some paint wear and surface marks consistent with workshop use
Suitable for use in drill presses and lathes requiring MT3 mounting

Miller Welder Cooler

Skylarc Ref H167324

Welder water cooler

Victoria Rotary Table

Skylarc Ref X167314

160mm three jaw chuck
Chuck needs freeing
Broken mount one side

Wire Tension Gauge

Skylarc Ref Y167315

GM branded
Appears to be a tension gauge of some kind
Missing handle

Box of Gas Welding and Cutting Accessories

Skylarc Ref V167312

Assorted oxy acetylene parts
Hoses, regulators, torches
Flux

Arbor Press

Skylarc Ref Q167307

Manual arbor press
Approximate ram stroke: 200mm
Solid cast iron frame construction
Rack and pinion operated ram
Slotted base for versatile mounting options

Partial Set of Reamer Pilots

Skylarc Ref P167306

Set of Sutton Micro-Set pilots for adjustable reamers
Made in Australia by The Sutton Tool & Gauge Mfg. Co. Pty. Ltd.
Partial set in original wooden case

Meca Indexing Head

Skylarc Ref U167311

150mm three jaw chuck
Meca brand
Made in Spain
Tailstock
Turns smoothly

25 Drawer Cabinet

Skylarc Ref X167912

Steel tool box
Plastic drawers

Small Workshop Shelving Unit

Skylarc Ref O168293

Steel frame
Timber top and shelves

4 x Drill Chucks

Skylarc Ref N168188

Set of 4 drill chucks with 3MT (Morse Taper 3) shanks
Chuck capacity: 13mm
2 keyless
No keys
All metal construction, old stock, some surface rust visible
Suitable for use with drill presses or lathes that accept MT3 shanks

Large Lot of Thread Tools

Skylarc Ref K168185

Thread chasers
Gauges
2 tap handles

Toolbox of Drills, Allen Keys Etc

Skylarc Ref J168184

Metal toolbox containing a large assortment of hex keys (Allen keys) in various sizes
Includes 4 plastic bags of assorted drill bits, sizes range from small to large
Also contains additional hand tools such as files, wrenches, and a T-handle tap wrench
Sturdy steel toolbox with lockable latch and internal tray for tool organisation
Ideal lot for workshops, machinists, or general maintenance use
All items shown in photos are included

2 x Small Milling Machine Angle Blocks

Skylarc Ref E168179

Pair of cast iron angle plates with yellow finish
Dimensions: 100mm x 100mm x 70mm and 113mm x 83mm x 74mm
Each plate has machined faces for accuracy
Features slotted holes for clamping versatility
Some paint chips and cosmetic wear visible
Ideal for milling, drilling, or inspection set-ups
Solid and sturdy construction

Magnetic Base Parts and Dial Gauges

Skylarc Ref D168178

Lot of assorted magnetic base parts and dial gauges
Includes 2x Mitutoyo dial gauges (models 2046-08 and 1850-10B), one has no face cover.
Mix of magnetic bases including Solar and unbranded
Various rods, adjustment arms, and clamp parts

Large Lot of Compasses

Skylarc Ref B168176

Lot of 26 engineering compasses in assorted sizes
Includes wing dividers and spring compasses—ideal for metalworking, engineering, or drafting
Made from steel for durability and precision
Various lengths from small pocket size to large format
Generally used condition with some signs of wear and surface marks consistent with workshop use

Desouter Air Grinder

Skylarc Ref Z168174

Desoutter Air Grinder Type 04, made in England by Desoutter Brothers Limited. Includes original wooden storage case with mounted wheels and points chart inside lid. Red and silver body, Desoutter branding and serial number 178114 visible on tool. Comes with two grinding wheels fitted, wrenches, dressing stones, leather strap, and original instruction sheet. Case is partitioned for secure storage of grinder and accessories. Suitable for precision grinding tasks in metalworking and engineering applications.

Scribers and Calipers

Skylarc Ref Y168173

Assorted machinist tools lot including inside and outside calipers and scribers
14 x steel calipers in various sizes, some light surface rust present
30 double-ended scribers and picks, knurled handles, mixed straight and hooked points
Ideal for marking out, measuring, scribing and precision layout work
Tools show wear and use, but are in functional condition
Please see photos for details and contents of this lot

3 x Machinists Clamps

Skylarc Ref X168172

Set of engineers parallel clamps
Includes 2 clamps with 100mm long jaws and 1 clamp with 130mm long jaws
All clamps feature steel jaws and dual screw adjustment for secure holding
Two clamps are painted blue, one is unpainted steel
Knurled adjustment handles for easy tightening
Used condition, with some paint wear and surface marks

Large Lot of Drill Bits

Skylarc Ref W168171

Large assorted lot of twist drill bits
Largest size is 29/32"
Includes a wide range of sizes, both smaller and larger bits
Various lengths and shank types, some with squared or threaded shanks
Suitable for metalworking or engineering applications
Mix of used and unused condition visible in the lot
See photos for full contents and bit details

Starret Cutter Clearance Gauge

Skylarc Ref U168169

Starrett No. 459 Cutter Clearance Gage
Made by The L.S. Starrett Co., Athol, Mass. USA
Designed for precise measurement of cutter clearance angles
Clear scale marked 0–30 degrees
Stainless steel construction for durability
Includes original red Starrett protective case

Partial Distance Pieces Set

Skylarc Ref X168276

Precise Combination Distance Pieces set in fitted wooden case. Set contains multiple distance rings of varying thicknesses labelled with letters and numbers. Chart mounted inside lid gives combination thickness values in inches. Four additional pieces are included for setting parallels, not listed on the main chart. Instructions for use and all dimensions are provided on the chart. Wooden case with hinged lid and clasp closure. Chart labelled with copyright and instructions to read chart. Contents and chart indicate original series.
Some pieces appear missing

Matrix Slip Gauges Inch Set

Skylarc Ref W168275

Matrix slip gauges inch set in black plastic case. Manufactured by Coventry Gauge & Tool Co. Ltd. England. Serial number Y 10615. Various gauge blocks marked with values from 0.01 to 1 inch. Some slips are marked as missing. Protective slips noted in the set. Case labeled E-81 Workshop. Includes original Matrix branding on inside and outside of case.

Adjustable Boring and Facing Head

Skylarc Ref N168266

MT2 boring head included.
MT3 adapter supplied.
Boring head engraved with 'Made in Germany.'
Adjustment dial on the head.
Boring bar fitted to boring head.