Skylarc's Dunedin Industrial Auction

Durma 120 Ton NC Press Brake

Skylarc Ref B109561

Durmazlar HAP 30120
Press brake capacity is 120 tons
3050mm bending length
Maximum stroke is 155 mm
Stroke rate is 9 strokes per minute
Top tool weight is 116 kg
Bottom tool weight is 187 kg
Total weight is 7880 kg
Made in Turkey
ELGO P8822 NC control system
Three phase
3220mm long V block
Includes press brake tools as pictured
Hydraulic powered
Manufactured 2001
Serial number 7042041009
Foot controller
Tidy machine straight out of work

Scott Three Phase Lathe

Skylarc Ref F109539

Model: Scott 1640 Lathe
Bed length 1580mm
Distance between centers approx 1000mm
Swing over bed approx 400mm
Swing over gap approx 500mm
Swing over cross slide approx 240mm
16 spindle speeds
33rpm - 2000rpm
Metric and imperial thread cutting
Quick change tool post with 3 tool holders
250mm three jaw chuck
320mm four jaw chuck
400mm faceplate
56mm spindle bore
No.4 MT tailstock
Sino SDS6-2V digital read out
Fixed steady
250mm removable bed gap
Traveling steady
Coolant pump
Work light
Manufactured 2013

CMC SAL FU1ET Universal Milling Machine

Skylarc Ref D109537

Model FU1ET
Manufacturer CMC SAL ICIAR-DEBA
Made in Spain
Table area 1300 x 300 mm
Number of T-shaped slots 5
Longitudinal automatic travel 950 mm
Vertical automatic travel 450 mm
Horizontal and vertical NT40 spindle taper
Vertical spindle speeds 70 - 2500rpm
Horizontal spindle speeds 45 - 1800rpm
Number of feeds 9
Longitudinal and cross feeds 20-320 mm per min
Vertical feed 6.7-96 mm per min
Rapid longitudinal and cross feed 2400 mm per min
Includes Sony Magnescale LM20-22R digital readout

Rong Fu RF-330NAA Bandsaw

Skylarc Ref W109478

Model RF-330NAA.
Manufacturer Rong Fu Industry Co Ltd.
Serial number 3900497.
Manufacture date 2013 04.
Machine weight 590 kg.
Control panel with push buttons and rotary selector.
Blade proper tooth selection and speed rate recommendations sticker present.
Equipped with vise for material clamping.
Fitted with wire brush cleaner on blade.
Variable speed control dial present on drive motor assembly.
Saw arm operated by hand wheel mechanism.
Coolant delivery hose fitted to blade guide.

Approx 45000 Litre Steel Tank/Silo

Skylarc Ref D109511

Formerly used for liquid storage tank
Approx 45000 litre capacity
Ladder up the side
Level gauge

Approx 45000 Litre Steel Tank/Silo on Stand

Skylarc Ref E109512

Formerly used as a grain store and prior to that a liquid storage tank
Approx 45000 litre capacity
Ladder up the side
On 1800mm tall steel stand
Level gauge

Ribon RUR-H 1000 Cylindrical Grinder

Skylarc Ref H109541

Manufacturer Ribon
Model RUR-H 1000 New Series
Made in Italy
Chuck size 200mm
Grinding wheel diameter 400mm
Bed length 1600mm
Maximum grinding length 1000mm
Main wheel speed 1500rpm
Power supply three phase
Control panel includes table speed adjustment and dwell control
Variable chuck speed
35 - 310rpm

MAS VR2 Radial Arm Drill Press

Skylarc Ref V109451

Brand MAS
Model VR2
Year of manufacture 1988
Radial arm drill press
550mm square drill block
250mm spindle travel
MT3 spindle taper
Spindle speeds from 56 to 2800 rpm
Serial number 3638
Auto feed
Kovosvit N P Sez Usti
Coolant pump
Very tidy machine in handy size

Paykel Single Phase Drill Mill

Skylarc Ref B109457

Comet mill drill machine
Table 700mm x 200mm with T-slots for work holding
No.3 MT spindle taper
120mm spindle travel
2 HP induction motor
Motor power 1.5 kW
Single phase 220 240V
Motor speed 1420 RPM
12 spindle speeds
Speed range 100 to 2500 RPM
Manual feed handles
Hand wheel for X Y axis movement
Vertical quill with depth gauge
Includes metal work table and stand
Machine vise mounted on table
Archer Chuck and collets
Two face mill cutters supplied
Matched stepped parallels
Drawer contains clamps and small tools
Operation manual provided
Custom X axis power feed (not working)
Work light
Year of manufacture 1994

Kleen 3.6 Metre Metal Guillotine

Skylarc Ref U109476

Kleen branded hydraulic guillotine shear
3670mm max cut length
2mm capacity
Control panel includes Start Stop Raise Lower buttons
Manual and Auto mode selector switch
Pedal switch connects via cable for operation
Hydraulic system with visible maintenance records for oil and filter
Shear blade and clamping mechanism visible
Front and rear safety rails present
Hand crank back gauge adjustment at rear
Electrical and hydraulic lines attached to power and control systems

Very Large Kasto Mechanical Hacksaw

Skylarc Ref U109450

Kasto mechanical hacksaw
Cuts maximum 620mm square
Includes 4 new spare blades
Blade length 1040mm
Three phase
Power supply 415 volts
Weight noted as 2690kg
Front and back vices fitted
Manual control panel with main power, coolant, vices, and bow control
Has been modernized with VSD
Powered vices
The biggest hacksaw we've ever sold, possibly the biggest in NZ.

Colchester Triumph Lathe

Skylarc Ref A109456

Model: Colchester Triumph 7 1/2 x 30
Three phase metal lathe
1110mm long bed
700mm between centres
400mm swing over bed
53mm spindle bore
8 spindle speeds
40 - 800rpm
Coolant pump
230mm diameter 3 jaw chuck
300mm diameter 4 jaw chuck
355mm diameter faceplate
Change gears
Fixed steady
Traveling steady
Some tooling and accessories

Single Phase Lathe

Skylarc Ref R109473

Model: Shanghai Machine Tools C0630
Swing over bed 150mm
Distance between centres 550mm
Spindle bore 28mm
Number of spindle speeds 6
Spindle speed range 75 - 1325 rpm
Three jaw 120mm chuck
Three jaw 165mm chuck
Four jaw 160mm chuck
Four jaw 200mm chuck
Fixed steady
Travelling steady
230mm faceplate
Range of tooling and accessories
Work stand with cupboards
Manuals
Manufactured 1973
Very tidy little home handyman's machine

FE Furnice Engineering 12kW Kiln, as new

Skylarc Ref K109388

FE Furnice Engineering 12kW Kiln.
Model number not indicated on ID plate.
12kW output.
1000⁰C max temp.
230V, 3-Phase.
Interior dimensions approx 625x510x810mm.
Unit is as new unused. Control panel is dirty from being stored open on top.

5 Large I-Beams

Skylarc Ref U109502

Lot includes assorted steel I beams.
1 x 610 UB 113kg per metre at 6.1 metres long.
2 x 610 UB 101kg per metre at 4.8 metres each.
1 x 530 UB 82kg per metre at 4.4 metres long.
1 x 460 UB 82kg per metre at 6.3 metres long.
Total weight 2.1 tonnes.

Large Steel Tank

Skylarc Ref H109515

Approx 25000 litres
600mm opening at end with cover
Various pipes etc protruding
Mounting flange 2780mm from end

Large Steel Silo

Skylarc Ref I109516

2000mm diameter
2700mm long excluding cone seconds
sections
Viewing ports and sensors on sides
500mm x 500mm side access panel
580mm diameter top access panel
970kg

6 Lengths 460UB Structural Steel I-Beams

Skylarc Ref A109560

Six lengths of 460UB steel beams
Each beam is approximately 4.5 metres long
Shortest length is 4140mm
Longest length is 4600mm
Beams weigh 74.6 kilograms per metre
Total weight for all beams is 1980 kilograms

Kasto Mechanical Hacksaw

Skylarc Ref T109449

Kasto SABI HER 350 model metal hacksaw
720mm long blade
Manual operation lever and graduated adjustment dial
Integrated coolant pump
Three phase 16A 500V 50Hz IP66 plug fitted
Vise with handwheel clamp
Manual electric positioning controls
Electrical enclosure with start control button
Power cable included
Large numbers of spare blades which are too long but can be cut down

MAS Kovosit VR4 Radial Arm Drill

Skylarc Ref W109452

Model MAS Kovosit VR4
Spindle speeds 45 - 2000rpm
Manufactured in 1970
MT4 spindle taper
Auto feed
1340mm horizontal arm
120mm spindle travel
550mm square drill block
Supplied by Mesco Riddell Limited
Fitted with a 32 amp three phase plug

Pallet Racking Uprights and Cross Beams

Skylarc Ref X109453

Includes 4 uprights
Each upright measures 4270mm tall and 910mm wide
Includes 26 cross beams
Each cross beam measures 2660mm long
Uprights are blue steel
Cross beams are orange steel
Pallet racking components are unassembled

Electric Grout Mixer Single Arm Blender with Barlow-Westward Motor

Skylarc Ref E109460

Electric grout mixer with single arm blender and mixer
Powered by a Barlow-Westward geared motor
Motor rating is 7.5 kW
3 phase power supply required
Output speed is 22 RPM
Mixing chamber dimensions are 900mm by 850mm by 900mm deep
Centre shaft is 80mm square
Unit was previously used in a foundry for mixing moulding sands
Includes forklift pocket slots
Overall dimensions are 2250mm length including 800mm platform by 1000mm width by 1100mm height
Total weight is 1500 kg

White Colour Steel Sheets

Skylarc Ref O109470

2550mm x 580mm
0.8mm thick
1670kg total

Hydraulically Powered Adjustable Height Loading Dock Platform

Skylarc Ref P109471

Hydraulically powered adjustable height loading dock platform
Main platform dimensions are 2.1 metres wide by 2.3 metres long
Flap measures 2.1 metres wide by 390mm long
Lowest platform position is 240mm from the ground
Platform height when packed is 500mm
Full raised height is 1050mm
Fitted with PDL 16amp 5 pin plug and lead
Includes long remote controller lead
Powered by 1.1kW 3 phase motor for hydraulic pump unit
Overall dimensions are 2.1 metres long by 2.45 metres wide by 600mm high
Total weight is 1515kg

Large Lot of Carver Type Clamps

Skylarc Ref V109477

Carver type milling clamps
Approx 46 total
Largest sizes are 300mm long
Smallest are 150mm long
Range of stands

Large Steel Tank

Skylarc Ref G109514

Approx 25000 litres
610mm opening at end
Various pipes etc protruding
Mounting flange 2780mm from end

Galvanized Steel Frames 600x600x1400mm Bolted Construction

Skylarc Ref R109525

Lot of 6 galvanized steel frames
Each frame is 600mm x 600mm and 1400mm tall
All bolted construction
Upright angles measure 80mm x 80mm x 8mm

Pallet Lot Galvanized Angle Irons 200x200x13mm

Skylarc Ref K109544

Pallet lot of galvanized angle irons
Includes 9 lengths per pallet lot
Each length measures 200mm by 200mm by 13mm
Each length is 3.8 metres long
Total weight per pallet lot is 1370 kilograms
Multiple pre-drilled holes on each length
Galvanized steel construction

Pallet Lot Galvanized Angle Irons 200x200x13mm

Skylarc Ref N109547

Pallet lot of galvanized angle irons
Includes 9 lengths per pallet lot
Each length measures 200mm by 200mm by 13mm
Each length is 3.8 metres long
Total weight per pallet lot is 1370 kilograms
Multiple pre-drilled holes on each length
Galvanized steel construction

3 x Large I-Beams

Skylarc Ref Y109558

460 UB 82 universal beams
Includes two beams at 5.6 metres long each
Includes one beam at 3.75 metres long
Total weight 1374 kilograms
Several beams have plates attached with multiple holes for bolting
Studs are pre-welded on flanges of beams

Assorted 450mm x 190mm Steel I-Beams

Skylarc Ref Z109559

Steel I-Beams
7 pieces total
Section size 450mm x 190mm
2 pieces at 3100mm length
1 piece at 3190mm length
1 piece at 3470mm length
1 piece at 4020mm length
1 piece at 5040mm length
1 piece at 5100mm length
Total combined weight approximately 1992kg

5 Lengths 410UB Structural Steel I-Beams

Skylarc Ref C109562

5 lengths of 410UB steel beams.
405mm x 175mm I-Beams
Each beam is 60 kilograms per metre.
Lengths
4970mm (bar welded on bottom)
3600mm
4590mm
3870mm
5050mm
Total weight is 1518 kilograms.

6 x 410 UB 60 Steel I-Beams

Skylarc Ref D109563

6 steel beams included.
Beam specification is 410 UB 60.
Lengths are 4.9 metres, 3.5 metres, 3.2 metres, 3.1 metres, 2.7 metres, and 2.0 metres.
Total weight is 1216 kilograms.
Stillage included as shown in photos.

6 x H-Beams

Skylarc Ref M109572

310mm x 330mm h-beams
310UC 137
6 total
2000mm
1800mm
3 x 2700mm
5100mm
4600mm
Total weight 1.6 ton

Huge Hydraulic Ram Assembly

Skylarc Ref E109590

Hydraulic ram assembly with large frame and chain drive.
Barrel outer diameter is 370mm by 2300mm long.
Chrome spare is about 140mm diameter.
Side frames are folded channels 600mm by 100mm.
50mm pitch chains and sprockets.
Overall dimensions are approximately 5500mm long by 800mm wide by 700mm high.
Total weight is approximately 2.6 tonnes.
Yellow painted steel construction.
Chain sprocket assembly attached at one end.
Hydraulic hoses and fittings present.

MEGA BS-360A Horizontal Bandsaw

Skylarc Ref M109416

Horizontal metal cutting bandsaw
360 mm diameter capacity
Made by MEGA MACHINE CO LTD Taiwan
Model BS-360A
Electric power feed motor has been removed due to gearbox failure but band saw runs fine
Operates as a manual vice clamping band saw
3.7 kW 3 phase main drive motor
6 adjustable belt speeds
Includes two support stands with rollers
Includes swarf tray with parts
Overall size approximately 2200 mm x 1500 mm x 1500 mm
400mm max cut width
Approximate weight 1200 kg

Zincalume Steel Sheets

Skylarc Ref N109469

Zincalume steel sheets.
Sheets are 620mm wide.
Sheets are 2360mm long.
Sheets are 0.8mm thick.
Total weight is 1078 kilograms.

Hydraulic Lifting Platform Elevator

Skylarc Ref Q109472

Rated SWL of 2500 kg
Platform dimensions are 1.5 m wide by 3 m long with 6 mm thick chequer plate top
Fully elevated height is 1500 mm
Lowest point height is 520 mm
Powered by a three phase 3 kW four pole motor made by Teco
Control activated by push button remote with cable flex
Self-contained unit
Mobile with forklift pockets
Total weight is 1638 kg

Gear Head Drill Press

Skylarc Ref E109486

Copy of an AB Aborga drill press
Three phase 2hp motor
8 spindle speeds
65 - 800rpm
120mm spindle travel
Morse taper No 4 spindle
Two speed ranges
Auto feed
Tapping and drilling modes
560mm x 470mm table
Coolant pump and tank
Drill height and rotation on pedestal needs freeing

Colchester Three Phase Lathe

Skylarc Ref G109488

Model: Colchester Triumph 7 1/2
Three phase
1600mm long bed
140mm removable gap
1150mm between centres
52mm spindle bore
200mm swing over bed
300mm swing over gap
8 spindle speeds
50 - 1000rpm
Quick change tool post
5 holders with some tooling
Fixed and travelling steadies
240mm three jaw chuck
305mm four jaw chuck
355mm faceplate
Coolant pump

505mm OD Extra Heavy Wall Steel Pipe 5.2m Length

Skylarc Ref Y109506

Steel pipe with 505mm outside diameter
Approximate wall thickness 28mm
Internal diameter approximately 445mm
Length is approximately 5.2 meters
Estimated weight is approximately 330kg per meter
Total weight for this pipe is approximately 1.7 tonnes
Exterior painted surface
Pipe is round with heavy wall construction
One pipe included in this listing

505mm OD Extra Heavy Wall Steel Pipe 5.6m Length

Skylarc Ref Z109507

Steel pipe with 505mm outside diameter
Approximate wall thickness 28mm
Internal diameter approximately 445mm
Length is approximately 5.6 meters
Estimated weight is approximately 330kg per meter
Total weight for this pipe is approximately 1.7 tonnes
Exterior painted surface
Pipe is round with heavy wall construction
One pipe included in this listing

Pallet of Angle Steel

Skylarc Ref A109508

Bundle of steel angle sections
Total number of lengths is 19
Two sizes included are 150mm x 150mm and 90mm x 90mm
Longest lengths 2240mm
Some lengths are painted white
Several sections have pre-drilled holes
Steel construction
566kg total

Galvanized Angle Irons Assorted Sizes and Lengths

Skylarc Ref W109530

4 galvanized angle irons 200 x 16 mm at 4.7 m long
1 galvanized angle iron 150 x 16 mm at 4 m long
3 galvanized angle irons 150 x 10 mm at 4 m long
Total weight 1346 kg

Assorted Galvanized Steel Channels and Trusses

Skylarc Ref O109548

Lot includes 3 stackable stillages containing assorted galvanized channels.
3 channel fabrication trusses at 3.9 metres long.
2 channels sized 380x100 millimetres at 2 metres long each.
12 channels sized 300x90 millimetres at 3.1 metres long each.
Total weight is 2620 kilograms.

Assorted Galvanized Pipes

Skylarc Ref E109564

Six pipes 1.3 metres long with 325mm outside diameter
Each of the six pipes is spiral welded with 5.5mm wall thickness
Three pipes 1.2 metres long with 275mm outside diameter
Each of the three pipes has 6.5mm wall thickness
All pipes are galvanized steel
Pipes are supplied in a metal rack

Column Steel H-Beams Lot

Skylarc Ref K109570

250UC89.5 Column Steel H-Beams
4 pieces included
Piece lengths are 1.6 metres 1.7 metres 1.9 metres and 3 metres
Total combined length is 8.2 metres
Total weight is 740 kilograms for the lot

2 x Steel H Beams

Skylarc Ref L109571

Two steel H beams
Section size is 310mm x 325mm
One beam is approximately 5400mm long.
One beam is approximately 4350mm long.
Stillage frame is included in the lot.
Total weight is 1.45 tonnes.

Pair of Heavy Duty Steel Stands 460 UB Beam Uprights

Skylarc Ref P109575

Two heavy duty steel stands
Base and top made of 25mm plate
Uprights are 460UB steel beams
Base dimensions are 1450mm by 500mm
Top dimensions are 1070mm by 200mm
Total weight for both stands is 1034kg
2000mm tall to top plate

5 x Galvanised Steel Tower Sections

Skylarc Ref S109526

All bolt together construction.
Galvanised steel tower sections.
Each tower is 670mm x 670mm base x 1930mm height.
Weight is approximately 130kg each.

200x200 Galvanised Angle Steel Lengths

Skylarc Ref Y109532

Eight lengths of galvanised angle irons.
Section size is 200mm by 200mm.
Three lengths are 17mm thick.
Five lengths are 13mm thick.
All lengths are between 4 meters and 5 meters long.
Total combined weight is 1770 kilograms.
Numerous pre-drilled holes are present in each piece.

150x150 Galvanized Angle Irons Stillage Lot

Skylarc Ref P109549

Stillage lot of 150x150 galvanized angle irons
Assorted lot with lengths up to 3 meters
Total weight 1372 kilograms
Includes various sections with bolt holes
Steel stillage included

Stillage Lot Galvanized Angle Iron Channels and I Beams

Skylarc Ref T109553

Stillage lot of galvanized angle iron channels and I beams
3 units of 150 x 100 x 13 angles at 3.5 meters long
3 units of 230 x 75 channels at 3.5 meters long
4 units of 150 x 150 x 10 angles at 2.1 meters long
2 units of 310 UB at 2.1 meters long
Total weight is 970 kilograms
All items are stored on a galvanized metal stillage frame
Mix includes I beams angle irons and channels with predrilled holes

Santasalo 500kW Reduction Gearbox

Skylarc Ref Y109402

Manufacturer Santasalo Kymi-Strömberg OY Kartkila Finland
Model 1C450
Serial number 47657
Power rating 500 kW
Input speed 1470 RPM
Gear ratio 4.05 to 1
Input shaft diameter 140 mm
Output shaft diameter 200 mm
Oil specification ISO VG 320
Recommended oils Esso Spartan EP320 Mobilgear 632 Shell Omala Oil 320 Teboil Pressure Oil 320
Oil capacity 98 litres
Mass 1810 kg
Year of manufacture 1985
Includes oil water cooler and circulation pump

Lenze 37kW Right Angle Geared Motor

Skylarc Ref A109404

Manufacturer Lenze
Model GKS14-3M HAK 180-32
37kW electric motor
Three phase
Rated speed 1470 RPM
Gearbox ratio 47.9 1
Output speed 30 RPM
Hollow bore 100 mm
Right angle geared motor
Output torque 6528 Nm at 50 Hz
Oil type CLP 460
Motor model VDE 0530
Weight 686 kg

6.5 Meter Powered Roller Conveyor Set

Skylarc Ref Q109420

Total length is 6.5 meters.
Conveyor set is split into three sections each 2.2 meters long.
Rollers are 390mm wide and 50mm in diameter.
Side frames are 160mm deep.
Powered by SEW geared motor.
Drive is through a common shaft and O-ring drive belts to each roller.

Assorted Large Nuts and Bolts Pallet Lot

Skylarc Ref K109440

Large assorted nuts and bolts pallet lot
Includes galvanised M30 nuts
Includes galvanised M36 nuts
Two drums of black machine bolts 20mm x 100mm
Total pallet weight is 394 kilograms
Components are contained in buckets and boxes as shown
Lot includes nuts and bolts of various sizes and finishes

Fuel/Oil Tank on Stand 380 Litre Capacity

Skylarc Ref S109448

Fuel or oil tank on metal stand
Tank diameter is 650mm
Tank length is 1200mm
Capacity is approximately 380 litres
Equipped with liquid level gauge
Gauge
Contains Mobrey level switch rated to 250V AC 5 Amp 50Hz
Maximum working pressure of level switch is 3 ATM
Includes outlet valve with handle

Pallet of Gas Cutting Equipment

Skylarc Ref T109475

Includes multiple oxy acetylene cutting torches
Assortment of oxy acetylene regulators with attached gauges
Various lengths of red and green gas hoses included
Retracta blue hose reel present
Set contains multiple cutting tips branded KOIKE
Additional cutting tips in packaging present
Several flashback arrestors visible
Hoses appear to have standard gas fittings
Includes multiple styles of cutting torch handles
All items shown in photos are included
No further information on tested condition or model numbers

SCM Horizontal Mortiser

Skylarc Ref D109485

Model: SCM AS16 Horizonal Mortiser
Three phase
555mm x 300mm cast table
1.5 hp motor
16 amp plug

Large Tank/Pipe Rollers

Skylarc Ref F109487

1260mm between centers of rollers
300mm diameter rubber lined rollers
On castors (one broken)
Unpowered

Large Bolt Together Culvert Pipe

Skylarc Ref N109495

Assorted pieces of heavy galvanized sections.
Sections form a pipe approximately 2 metre diameter when assembled.
Sections are corrugated and have pre-drilled bolt holes.
Total weight is 1370 kilograms.
Sections are suitable for bolting together to create a culvert pipe.
Ex Clyde dam construction
Unsure if it's a complete unit

Pallet of Galvanized Steel Sections

Skylarc Ref O109496

Channel steel 130mm x 62mm mostly 920mm long
Angle steel largest sizes 90mm x 90mm x 1300mm
Various square plate pieces
Most has holes drilled in it
472kg total weight

Pallet of Galvanized Steel Angle Brackets

Skylarc Ref Q109498

245mm long x 150mm x 150mm
5mm thick steel
4 holes drilled in each
Approx 135 units total
788kg total weight

Pallet of Galvanized Angle Steel Sections

Skylarc Ref R109499

Total quantity is 43 pieces.
Each section is 1240mm long.
Dimensions are 100mm by 100mm.
Angle steel construction.
Total weight is 670kg.
Multiple fixing holes on each section.
Galvanised finish visible in images.

Old Gantry Crane Frame (Bridge Base?)

Skylarc Ref V109503

Steel fabricated gantry crane frame
Total length 8 meters
Made of 380 x 100 channel sides
Channels spaced approximately 850 mm apart
Total weight 1510 kg
Great frame for a farm bridge

Galvanized Trench Cover Plates 1.34m x 1.34m Hinged Gusseted

Skylarc Ref X109505

Two galvanized trench cover plates included
Plates are gusseted underneath for additional support
Plates are hinged on one side
Each plate measures 1.34 meters by 1.34 meters
Plate thickness is 6mm
Plates are constructed from galvanized metal
Each plate features lifting handles
Plates have hinge mechanism along one edge

Pallet of Galvanized Steel Sections

Skylarc Ref S109500

Approx 35 x angle steel mainly 100mm x 100mm x 1240mm long
Large galvanized ground anchor
Several other assorted bits
Total weight 792kg

Pair Steel Fabricated Pedestals Bases

Skylarc Ref V109529

Pair of steel fabricated pedestals bases
Heavy duty pedestals workhorses
Each base measures approximately 580mm x 410mm x 2660mm long
Bases have lifting eye hooks
Total weight is 1112kg

200mm and 150mm Galvanised Angle Irons

Skylarc Ref X109531

200mm and 150mm galvanised angle irons
Assorted lengths up to 5m long
Total weight 992 kilograms
Pre-drilled holes in angle irons
Multiple pieces included in lot
Galvanised steel construction

Angle Iron and Channel Stillage Lot

Skylarc Ref A109534

3 pieces 175x175x16mm angle iron 4400mm - 6000mm
1 piece 150x150x8mm angle iron with gussets 5300mm long
1 piece 380x100 channel 4 meters long

Pallet Lot Galvanized Angle Irons

Skylarc Ref Q109550

Pallet lot of galvanized angle irons
Four 200 x 13 angle irons at 1.8 metres long
Four 150 x 10 angle irons at 2.4 metres long
Two 150 x 10 angle irons at 1.7 metres long
Total weight 600 kilograms
All items are galvanized steel

Bolt Together Galvanised Steel Frames and Stands

Skylarc Ref R109551

Bolt together galvanised construction
Frame dimensions approximately 1 metre by 1.7 metres by 1.55 metres tall
Each frame weighs 190 kilograms
Estimated total weight of two frames and accessories is 380 kilograms
Make good water tank stands

Pallet Lot Galvanized Angle Irons

Skylarc Ref J109543

Lot includes 4 pieces of galvanized angle iron at 200 x 200 x 13 mm and 3.8 m long
Lot includes 3 pieces of galvanized angle iron at 175 x 175 x 13 mm and 3.8 m long
Total weight of lot is 900 kilograms
Multiple pieces have pre-drilled holes

Stillage Lot Assorted 200 I-Beam and Channel Steel Sections

Skylarc Ref H109567

Assorted lot of steel sections included in stillage.
Includes 200 universal beams and 230 channels.
Lengths range from 1.4 metres to 3.6 metres.
Total weight including stillage is 768 kilograms.
Sections stored on metal stillage frame.

Assorted 250mm UB I Beams Lot

Skylarc Ref I109568

Assorted lot of 250mm UB I beams
12 assorted 250 UB I beams included
Lengths range from 2.2m to 2.9m
Stillage is included
Total weight is 1166 kg

Heavy Wall Steel Pipe 2 Pieces

Skylarc Ref S109578

Two heavy wall steel tubes.
Total weight 1640 kilograms.
One tube is a new offcut with 610 millimetre outside diameter.
This tube has a 19 millimetre wall thickness and is 2180 millimetres long.
The second tube is 2900 millimetres long.
Second tube has a 725 millimetre outside diameter.
Second tube has a 19 millimetre wall thickness.
Great culvert pipes

Heavy Duty Steel Sawhorse Platforms

Skylarc Ref U109580

Pair of heavy duty steel sawhorse platforms
Top channel measures 230mm by 90mm
Top plate thickness is 25mm
Top plates measure 540mm by 210mm
Overall length is 1650mm
Overall height is 650mm

Handrailing Bollards and Angled and Straight Hand Rail Sections

Skylarc Ref C109588

Handrailing bollards included.
Assorted angled hand rail sections included.
Assorted straight hand rail sections included.
Total lot length approximately 6.5 metres.
Total lot weight 410 kilograms.
Yellow and galvanized steel components visible.
All items are bundled together as one lot.

Stainless Steel Vat Tank Bin 2500-3000L

Skylarc Ref M109598

Stainless steel vat tank bin with open top and folded top edge
Internal dimensions at top are 1750mm x 1630mm x 1650mm deep
Capacity approximately 2500 to 3000 litres
Overall dimensions are 2050mm x 1900mm x 1850mm
Weight is 535 kilograms

316 Stainless Steel Cone Bottom Tank

Skylarc Ref P109783

316 stainless steel cone bottom tank
Cone is jacketed and foam filled
Main tank dimensions are 770mm diameter and 1400mm long
Cone length is 950mm
Two wash balls installed inside tank
Mounted to a steel pallet
Approximate weight is 320kg

316 Stainless Steel Cone Bottom Tank

Skylarc Ref H109775

316 stainless steel cone bottom tank
Cone is jacketed and foam filled
Main tank dimensions are 770mm diameter and 1400mm long
Cone length is 950mm
Two wash balls installed inside tank
Mounted to a steel pallet
Approximate weight is 320kg

Gravity Feed Roller Conveyor Sets

Skylarc Ref S109422

2 frame sets per lot number
Each frame set is 3 meters long with 26 rollers per frame
Rollers are 50 mm diameter with 11 mm hexagonal steel shafts
Rollers are overall 540 mm long with 510 mm usable full diameter reduced at ends
Frames are 190 mm deep by 25 mm by 2.8 mm thick folded steel
Units were originally power driven by O rings from a drive shaft still mounted in frames
Drive shaft is easily removed
Overall dimensions per set are 3100 mm long by 610 mm wide by 210 mm high
Weight is 100 kg per set

Pallet of Galvanized Steel Sections

Skylarc Ref W109504

Large numbers of 50mm x 50mm and 60mm x 60mm angle in lengths up 1050mm
2 x 125mm x 125mm x 1390mm long
125mm x 125mm x 1240mm long
452kg total

Bolted Galvanized Steel Tower

Skylarc Ref S109552

Bolted galvanized steel tower
Dimensions are 800mm by 800mm base and 2.8m tall
All bolted construction
Upright angles are 65x65x6 angle steel
Steel base plates with pre-drilled mounting holes
Cross-braced structure for stability
Hot dip galvanized finish

10 x Heavy Wall Steel Pipes

Skylarc Ref F109565

Heavy wall hydraulic tubes.
Pack contains 10 tubes.
Each tube approximately 1.4 metres long.
Outer diameter of each tube is 220mm.
Wall thickness of each tube is 11mm.
Total weight of the pack is 976 kilograms.
Tubes are stored in a steel frame cradle.

Ingersoll Rand 3-Phase Air Compressor

Skylarc Ref M109390

Ingersoll Rand 3-Phase Air Compressor.
Ingersoll Rand Type 30 air compressor.
Model number 234.
Serial number 263093.
Compressor size 3 inch and 1 3/4 inch x 2 3/4 inch.
Fitted with three phase induction motor.
Motor made in England.
Motor frame C712S DC1598 BBA.
Motor speed 1425 RPM.
Motor rating MCR to BS 2613.
Motor voltage 380/420V three phase.
Motor current rating 5 to 1.5 amps.
Motor cycles 50 Hz.
Pressure gauge fitted.
Automatic pressure switch unit fitted.
Orange power cord with three phase plug attached.
Unit mounted on horizontal air receiver tank measuring approx 1350mm long, 350mm diameter.

Large Water Trough / Skip

Skylarc Ref Y109740

Large Water Trough / Skip.
Made from 4mm steel.
Previuodly used in apple harvesting for floating apples for sorting.
Approx 1200kg weight.
Approx 4000x2600x1450mm in size.

Stainless Steel Open Top Vat Tank with Heat Exchanger

Skylarc Ref G109774

Stainless steel open top vat or tank.
Integrated stainless steel tube heat exchanger.
Heat exchanger has 48 tubes.
Tube diameter is 19mm.
Tube length is 1.75 meters each.
Internal top dimensions are 2080mm x 1740mm.
Internal bottom dimensions are 2080mm x 1000mm.
Vat depth is 1050mm.
Weight is 420kg.
Multiple threaded and flanged pipe fittings on sides.
Heat exchanger tubes mounted internally along one side.
Reinforced frame construction.

Hydraulic Press Frame

Skylarc Ref C109458

990mm between uprights
Cable driven table lift
Pressure gauge
No hydraulics

Steel Chain Mesh Conveyor Belt Rolls, 58m Total

Skylarc Ref G109384

4x Steel chain mesh conveyor belt rolls.
Made by Melwire Pty Ltd Australia.
Four coils with a total length of 58.5 meters.
Type R1227HD Rolmat product code CRAQ0762G30.
Belt width is 760 mm.
Centre to centre distance of pins or rods is 28 mm.
Pin diameter is 4.8 mm.
Steel gauge is 1.6 mm thick.
Belt thickness is 12.7 mm.
Chain weight is 16.6 kg per meter.
Total weight is 980 kg.

Steel Air Pressure Tank

Skylarc Ref Z109663

Steel Air Pressure Tank.
Unknown manufacturer and age.
760mm diameter, 1530mm height.
100lbs psi working pressure.

2 x Steel Guard Rails

Skylarc Ref O109522

Two yellow steel safety barriers included.
Each barrier is 1100mm wide.
Each barrier is 1280mm tall.
One barrier is 1500mm long.
One barrier is 2130mm long.
Constructed from round steel tubing.
Each barrier has flanged feet for surface mounting.
Painted yellow finish.

6 Metre Steel Pipe

Skylarc Ref Z109533

Outside diameter is 220mm
Length is 6100mm
Wall thickness is 12mm
Great culvert pipe

Universal Column Steel Beams with Stillage Frame

Skylarc Ref J109569

4 lengths of H-Beam
Stillage frame included in the lot.
Beam sizes are 200 UC 52 and 46.
Individual beam lengths are 2.38 meters, 1.55 meters, 1.55 meters, and 1.35 meters.
Total combined length is 6.8 meters.
Total weight for the lot is 340 kilograms.

25mm Reinforcing Steel Deformed Bar Rods 1.7-2m Length

Skylarc Ref Z109585

Reinforcing rods deformed bar
Diameter is 25mm
Lengths range from 1.7 to 2 meters
Multiple rods included in the bundle
940kg total weight

Double Skin Jacketed Steel Tank with Mixer Blades

Skylarc Ref F109747

Double skin jacketed steel tank
Internal diameter approximately 1.2 metres
Internal depth approximately 1.6 metres
Water jacket thickness approximately 50mm
Tank height approximately 2 metres overall
Fitted with internal mixer blades
Estimated weight is about 1 tonne
Previously used as a chocolate stirrer
Lid with inspection hatch on top
Cylindrical design with three support legs
Approx 1000kg

Double Skin Jacketed Steel Tank with Mixer Blades

Skylarc Ref G109748

Double skin jacketed steel tank
Internal diameter approximately 1.2 metres
Internal depth approximately 1.6 metres
Water jacket thickness approximately 50mm
Tank height approximately 2 metres overall
Fitted with internal mixer blades
Estimated weight is about 1 tonne
Previously used as a chocolate stirrer
Lid with inspection hatch on top
Cylindrical design with three support legs
Approx 1000kg

Vertical Plate Racks Pair

Skylarc Ref H109749

Pair of vertical plate racks.
Made of 200mm channel steel.
Overall length 2950mm.
Overall height 1400mm.
Lower gaps are 355mm each.

Stainless Steel Industrisl Storage Rack Shelf

Skylarc Ref X109791

Stainless Steel Industrisl Storage Rack Shelf.
All stainless steel construction
Overall dimensions are 2850mm long by 950mm deep by 2050mm tall
Top shelf is 1050mm from the ground
Middle shelf is 650mm from the ground
Lower shelf is 300mm from the ground
Divider spaces are 370mm gap spacing
Unit weight is 126kg

Snorkel Sissor Lift SL-25, Faulty, no batteries

Skylarc Ref K109310

Snorkel Sissor Lift.
Manufacturer Snorkel
Model SL-25
Serial number 972630797
Platform lift height 7.6m
Platform drive height 6m.
Max Capacity 363kg
Voltage 24V DC
NOTE that Batteries not included!
Control panel includes joystick and emergency stop.
Platform with handrails and safety warnings.
Hydraulic lift operation.
Safety limit control faults present according to sign on unit.
Non-certified unit.

Kudu 11kW VH-60 Drive Head

Skylarc Ref S109318

Kudu VH-60 Drive Head
Powered by CMG electric motor
Motor type PPA160ML
Motor power 11 kW
Motor speed 1465 RPM
Motor voltage 415 V
Model VH-60
Axial bearing rating 78 kN
Brake capacity 2034 Nm
Continuous power rating 45 kW
Maximum driven speed 500 RPM
Flame proof and explosion proof
Dimensions approximately 1000 mm length x 1500 mm width x 1450 mm height
Weight 565 kg
Manufactured by Kudu Industries Inc Calgary Alberta Canada.

Milwaukee M18 Hammer Drill Driver, Bandsaw, Batteries, Charger

Skylarc Ref Z109611

Milwaukee M18 Hammer Drill Driver, Bandsaw and more.
Includes:
- M18 Fuel Hammer Drill Driver model.M18FPD2.
- M18 Fuel Bandsaw model M18CBS125S.
- 2x 6.0Ah M18 Lithium Ion Batteries.
- Battery Charger model M12-18FC
- Spare Bandsaw Blade model 48-39-0601
- Spare Bandsaw blade model 48-39-0521.

Husqvarna K970 Petrol Cut Off Saw w/ Assorted Disks & Filter

Skylarc Ref A109612

Husqvarna K970 Petrol Cut Off Saw.
Also includes a number of used and unused cutting disks up to 355mm diameter.
Includes a new spare motor air filter.

Assorted Stainless Steel Wall Sections

Skylarc Ref X109765

Assorted Stainless Steel Wall Sections.
Stainless steel wall sections pallet lot.
Sections are able to be bolted together.
Includes 4 loose panels each about 850mm wide by 1.8m tall
Includes 1 bolted section about 2.4m by 1.2m by 1950mm tall.
Total approximate stainless steel weight is 280kg.

Stainless Steel Shelving Unit

Skylarc Ref F109773

Stainless Steel Shelving Unit.
Vertical distance between shelves approx 380mm.
Approx 65kg weight.

Aerotech Fans F22 High Pressure Fan

Skylarc Ref C109406

Manufacturer is Aerotech Fans Melbourne Australia
Model F22
Single phase high pressure fan
2.2 kW Western Electric motor
Rated speed 2790 RPM
Foot switch with on off control is wired in
Mains power cable included

2 x Fantech 600mm Extractor Fans

Skylarc Ref D109407

This lot includes two Fantech extractor fans.
Model: AP0634P10B015/22o.
600mm diameter.
3 phase operation.
1.5kW TECO motor per fan.
Rated speed 1420 RPM.
Voltage: 415V Y.
Full load current: 3.4A.
Made in Australia by Fantech.
Serial number: 94123.
Order number: 2343.
Project: Fisher & Paykel.
Supplied with metal fan casings and mounting feet.
Date of manufacture: 15-Aug-1996.

2 x Fantech 600mm Extractor Fans

Skylarc Ref E109408

This lot includes two Fantech extractor fans.
Model: AP0634P10B015/22o.
600mm diameter.
3 phase operation.
1.5kW TECO motor per fan.
Rated speed 1420 RPM.
Voltage: 415V Y.
Full load current: 3.4A.
Made in Australia by Fantech.
Serial number: 94123.
Order number: 2343.
Project: Fisher & Paykel.
Supplied with metal fan casings and mounting feet.
Date of manufacture: 15-Aug-1996.

Fantech 600mm Extractor Fans

Skylarc Ref F109409

This lot includes two Fantech extractor fans.
Model: AP0634P10B015/22o.
600mm diameter.
3 phase operation.
1.5kW TECO motor per fan.
Rated speed 1420 RPM.
Voltage: 415V Y.
Full load current: 3.4A.
Made in Australia by Fantech.
Serial number: 94123.
Order number: 2343.
Project: Fisher & Paykel.
Supplied with metal fan casings and mounting feet.
Date of manufacture: 15-Aug-1996.

3 x Fantech Industrial Ventilation Fan s

Skylarc Ref H109411

Brand Fantech
Model AP0566P10B003
Industrial ventilation fan
Voltage 415V
Date of manufacture 4 May 1998
Motor type W E
Order number 4090
Serial number 124912
Rotation per second 16 rps
Fan with enclosure in galvanised steel
Blue electric motor mounted inside fan housing
Flange mount design with bolt holes
Assembled by John Webster
Australian made
Grease type specified as She Alvana R3 100 percent compatible

Belmont Supreme Dental Chair

Skylarc Ref K109414

Belmont dental chair model Supreme DDS 020341
Rated voltage 240V 50Hz
Rated current 3.2A
Short time loading 1 min
Type B Risk Class 1
Manufactured in Japan
Year of manufacture 1999
Base includes foot controls
Appears to have reclining back and extendable leg section
Armrests on both sides
Green on off switch and mains input on base
Chair has a teal blue seat and backrest
Back cover of headrest is plastic
Electrical cord visible and partially detached
Control pedal included

L. Kissling RVP-111B Inline Gearbox

Skylarc Ref B109405

Manufacturer L. Kissling & Co Maschinenfabrik CH-8052 Zürich Switzerland
Model RVP-111B
Serial number 45714/1
Power rating 60 kW
Gear ratio 8:1
Input shaft diameter 75 mm
Output shaft diameter 120 mm
Approximate weight 774 kg
BP Energol GR280XP oil specified on nameplate
Service time with one oil filling 4000 hours
Unit is in a wooden crate

2 x Fantech 600mm Extractor Fans

Skylarc Ref G109410

This lot includes two Fantech extractor fans.
Model: AP0634P10B015/22o.
600mm diameter.
3 phase operation.
1.5kW TECO motor per fan.
Rated speed 1420 RPM.
Voltage: 415V Y.
Full load current: 3.4A.
Made in Australia by Fantech.
Serial number: 94123.
Order number: 2343.
Project: Fisher & Paykel.
Supplied with metal fan casings and mounting feet.
Date of manufacture: 15-Aug-1996.

Rodier Menu and Display System

Skylarc Ref L109415

Rodier Menu and Display System unit.
Designed for illuminated display menus or signage.
Black aluminum frame construction.
Polycarbon panels
Hinged front panel with key lock.
Equipped with fluorescent lamp tubes for internal illumination.
Label indicates use of Philips Triphosphor Colour 84 Cool White replacement tubes.
Label lists Rodier Menu & Display Systems, Unit E, 3 Miro Place, Albany, Auckland, NZ.
Electrician ID on label: E1940.
Metal base mount for floor installation.
2200mm x 1000mm x 170mm
1500mm 550mm x 170mm

Bridgestone W Lug 12.00-20 16 Ply Nylon Tyre

Skylarc Ref X109427

Bridgestone W Lug tyre
Size is 12.00-20
16 ply rating
High tensile nylon construction
Model marked as JR6WZ
Includes rust band

High Lift Bottle Jack

Skylarc Ref G109436

.Maximum height is 1270mm.
Steel construction.
Square base plate.
Two side carrying handles.
Manual operation lever attached at the base.

High Lift Bottle Jack

Skylarc Ref H109437

.Maximum height is 1270mm.
Steel construction.
Square base plate.
Two side carrying handles.
Manual operation lever attached at the base.

8.8 Grade Galvanised Nuts and Bolts Pallet Lot

Skylarc Ref J109439

8.8 grade galvanised nuts and bolts included
Large sizes from 25mm to 36mm diameter
Includes two studs 1.4m long with 36mm diameter
Total pallet weight is 466 kilograms

Assorted Galvanized Nuts and Bolts Pallet Lot

Skylarc Ref L109441

Assorted galvanized nuts and bolts included.
Sizes range from M16 to M24 mm thread diameter.
Assorted lengths present in the lot.
Total weight is 240 kilograms for the entire pallet.
Stored in multiple red plastic containers.

Heavy Duty Squeeze Rollers

Skylarc Ref Y109454

Roller length is 1050mm
Roller diameter is 200mm
Solid steel rollers
Synchronized rise and fall adjustment
Geared drive system
Mounted on steel frame
No motor included

Pallet of Press Brake Tooling

Skylarc Ref B109483

Range of tooling
Longest are 840mm
Range of smaller tools and profiles

Air Powered Folding Machine

Skylarc Ref J109387

Air Powered Folding Machine.
Unknown manufacturer/model.
750mm max material width.
Thickness capacity unknown.
685kg total machine weight.

Pallet of Galvanized Steel Sections

Skylarc Ref B109509

Galvanised steel angle sections
Mixed sizes included
Longest lengths are 1390mm
50mm x 50mm
70mm x 70mm
90mm x 90mm
100mm x 100mm
All items are metal angle pieces with holes

2x Steel Platforms with Box Section Base Frames

Skylarc Ref M109520

Two steel platforms or table tops included
Box section base frames
One platform measures 3.15 meters by 1.25 meters
One platform measures 2.4 meters by 1.4 meters
Total weight of both platforms is 428 kilograms
Top surface on one platform is plain steel
Top surface on one platform is checkered plate steel
Steel construction with visible surface rust

Perforated Steel Plates 3050mm x 1525mm x 10mm 2 Pack

Skylarc Ref N109521

Pack includes two perforated steel plates.
Each plate is 3050mm long.
Each plate is 1525mm wide.
Each plate is 10mm thick.
Each plate has 9mm diameter holes drilled through.
Each plate weighs 340kg.
Total weight for both plates is 680kg.

Box Section Steel Frame Stand

Skylarc Ref P109523

Box section steel frame stand
Constructed from 50x50 mm box section steel
2 metres wide
1 metre deep
2.7 metres tall
Weight is 154 kg

Galvanized Rebar Assorted 20mm and 25mm Diameter

Skylarc Ref W109556

Galvanized rebar assortment
Diameters are 20mm and 25mm
Total weight is 966kg
Lengths range from 1.4m to 2.8m
Galvanized steel construction
Rebar is bundled and stored on a plastic pallet

Akebond Industrial Box Strapping Machine

Skylarc Ref B109717

Akebond Industrial Box Strapping Machine.
Model No.SP-575N
Made in Japan in 1999.
Stainless steel top panel.
Single phase.

Assorted Steel Pipes Bundle

Skylarc Ref G109566

Bundle of assorted steel pipes.
1 pipe is 2.2 metres long with a 355 mm outside diameter.
1 pipe is 1.25 metres long with a 320 mm outside diameter.
1 pipe is 1.2 metres long with a 270 mm outside diameter.
1 pipe is 1.6 metres long with a 220 mm outside diameter.
2 pipes are 1.46 metres long with a 220 mm outside diameter and 11 mm wall thickness.
1 pipe is 1 metre long with a 220 mm outside diameter.
Total weight is 734 kilograms.
All pipes stored on a pallet rack.

Large Cast Iron Plate

Skylarc Ref N109573

Large cast iron plate
896kg

Reinforcing Deformed Bars 32mm

Skylarc Ref Y109584

Reinforcing deformed bars.
Diameter is 32 millimetres.
Lengths range from 1.7 to 2 metres.
Total weight is 1028 kilograms.

Reinforcing Rods Deformed Bar 25mm 1080kg

Skylarc Ref A109586

Reinforcing rods deformed bar.
25mm diameter.
Length ranges from 1.7 to 2 meters.
Total weight is 1080 kilograms.

2x Steel Skip / Tank Bins

Skylarc Ref X109739

2x Steel Skip / Tank Bins.
Each is approx 3300x1800x600mm.
Made from 3mm steel.
See photos for design/type details.
750kg combined total weight

Heavy Wall Steel Pipe

Skylarc Ref J109595

Heavy wall hydraulic tube
2580mm long
440mm diameter flange
Outside diameter is 357mm
Wall thickness is 40mm
Weight is 818kg
Great culvert pipe

Largest Steel Deck / Platform

Skylarc Ref T109761

Largest Steel Deck / Platform.
Inside dimensions are 3800x2400x250mm.
Rusty surfaces.
420kg weight.

Steel Shafts and Heavy Wall Tubes Lot

Skylarc Ref R109759

Lot includes steel shafts and heavy wall tubes.
2 pallets in total.
Solid shafts up to 180mm diameter.
Chrome hollow bar is 140mm outer diameter and 75mm inner diameter.
Includes 127mm steel channels.
Various additional steel pieces included in the lot.

Stainless Steel Sheets with Holes

Skylarc Ref S109760

One lot stainless steel sheets with holes
Two sheets approximately 1.7m x 2.1m with 14mm holes at 75mm centres
Two sheets approximately 1950mm x 380mm with 15mm holes
Includes other pieces

Weg 30kW Electric Induction Motor

Skylarc Ref A109300

Weg 30kW Electric Induction Motor.
3-phase
2955rpm
246kg weight.
Shaft is approx 110mm long, 55mm diameter .
Shaft turns smoothly.

SEW K97 Gearbox w/ 7.5kW Electric Motor

Skylarc Ref E109304

SEW K97 Gearbox w/ 7.5kW Electric Motor
Manufacturer SEW-EURODRIVE
Model K97 DV132M4
Output power 7.5 kW
Input speed 1450 r/min
Gear ratio 38.30 to 1
Motor voltage 400V
Frequency 50 Hz
Current 15.50A at 400V
Speed after gearbox 37 r/min
Lubricant MOBILGEAR 630
Output shaft with double chain sprockets and brake disc
SEW-EURODRIVE manufacturer plate present
Gearbox mounting position B3B
Made in New Zealand

ABB 75kW Electric Motor

Skylarc Ref G109332

ABB 75kW Electric Motor.
Manufacturer ABB
Model M3BP 280SMA 4 B3
Power rating 75kW
Frame size 280S
Speed 1480rpm at 50Hz
Weight 684kg
IP rating IP55
S1 duty cycle
Maximum speed 2600rpm
Rated voltage 400D 690Y V at 50Hz
Rated current 135A at 400V delta
Three phase induction motor
Bearing type 6316/C3
IEC 34-1 compliant
Grease type specified: Unirex N2 or N3, Albedo EMS2, Mobilith SHC 100, Klüberplex BEM 41-132, or SKF LGHQ 3
Product code 3GBP282220-LDG
SP-20082-2
Class F insulation
Cosφ 0.85

Industrial Dry Mixer / Blender

Skylarc Ref Y109324

Industrial Dry Mixer / Blender.
Manufactured by E.B. McDonald Ltd Engineering.
Job number 1417.
Date of manufacture 11/95.
Designed for blending bird feathers for the pillow filling industries.
Tank is constructed from approximately 2 or 3mm thick mild steel sheet plate.
Tank diameter is 1180mm.
Tank depth is 1 metre plus a tapered bottom.
Slide valve in the bottom is approximately 100mm.
Fitted with a Penfold SP55 worm gearbox with 30/1 ratio.
Equipped with an ASEA three phase electric motor.
Three phase power supply required.
Starter and safety interlock included.

McNaught MaxiLube Grease Pump P5 w/ Mobil Grease & Trolley

Skylarc Ref A109326

McNaught MaxiLube Grease Pump model P5.
Includes barrel of Mobil multipurpose extreme pressure Automotive Grease, amount remaining unknown.
Includes Trolley.

2x ABB 11kW Electric Motors

Skylarc Ref F109331

2x ABB 11kW Electric Motors.
Two ABB electric motors included.
Both Model type QABP180L8A.
Rated power 11kW.
Rated current 23.4A.
Voltage 415V delta.
Frame size D180L.
Torque 140.1Nm at 5-50Hz.
Variable speed drive capable.
Electric fan cooled.
IP55 protection rating.
Insulation class F.
Weight per motor 183kg.
Total combined weight 366kg.
Date of manufacture 2005.12.

Industrial Heat Exchanger

Skylarc Ref Q109394

Industrial Heat Exchanger
Model CFE256-3
Manufacturer BBB Poiana UD Italy
Serial number G9702287
Date 04/97
6 axial fans on front face
Each fan rated at 315 W
Power supply 230V or 400V 50Hz
Motor feed 3.00 A at 230V or 1.70 A at 400V
Fan motor speed 1350 RPM
Maximum working pressure 30 bar
Galvanised steel exterior
Copper connection pipes on one end.

Kanetec Electric Lifting Magnet, 3000kg Max Rating

Skylarc Ref G109644

Kanetec Electric Lifting Magnet.
3000kg Max Rating.
Powered by a 12V Battery.

Air Powered Benchtop Heat Press

Skylarc Ref N109703

Air Powered Benchtop Heat Press.
Unknown msnufacturer/model.
Measures approx 410x240x360mm.
Single phase 10A plug.
Curved heating element size approx 140x66mm.
See photos for further design details.

Stainless Steel Trolley Bench

Skylarc Ref O109730

Six wheel stainless steel trolley bench
Length is 2.85 meters
Width is 950 millimeters
Height to top of shelf is 706 millimeters
Bench weight is 110 kilograms
Includes a bottom storage rack
Fitted with six swivel castor wheels
Constructed from stainless steel tubing and stainless steel panels

2x Galvanised Stacking Stillages.

Skylarc Ref B109743

2x Galvanised Stacking Stillages.
Each is 2030x860x1800mm.

2x Stainless Steel Catch Drip Trays

Skylarc Ref U109788

2x Stainless Steel Catch Drip Trays.
Each is approx 1450x1270x1200mm.
70mm diameter centre drains.
Note that one unit has missing leg.

Industrial Heavy Duty Steel Strapping Rolls & Accessories

Skylarc Ref B109379

Industrial Heavy Duty Steel Strapping Rolls w/ Dispensing Trolley, bucket of Crimps, & crimping tools.
7x new unused coils of 32mm wide sterl Strapping.
See photos for tools and dispenser Trolley type details.

SEW Gearbox w/ 0.75kW Electric Motor

Skylarc Ref F109305

SEW Gearbox w/ 0.75kW Electric Motor
Gearbox Model SA97 / R57
3-phase motor
1 rpm output speed.
90mm hollow bore.

Goulds Pump w/ 15kW CMG Electric Motor

Skylarc Ref H109307

Goulds Pump w/ 15kW CMG Electric Motor.
Goulds Pump model GIS80-65-1607.
80mm inlet.
65mm outlet.
182mm diameter impeller.
CMG Australia three phase asynchronous electric motor.
Motor type HGA 160MB-42-2.
Motor rating 15kW.
Motor speed 2945 rpm at 50Hz.
Motor IP55 rated.
Motor efficiency 92.4%.
Motor serial number 900588/013-006.
Supply voltage 380-415V at 50Hz.

2x Sew Eurodrive Gearboxes w/ Extra Clamps

Skylarc Ref L109311

2x Sew Eurodrive Gearboxes w/ Extra Clamps.
Larger unit is model KH107B AL180 with 22.62/1 ratio.
Small unit is model SA97/T R57 AM63.
Includes assorted curcular shaft Clamps, see photos.

Weg D315 4-Pole Electric Motor, 200kW

Skylarc Ref J109335

Weg D315 4-Pole Electric Motor.
Model 315SM1093
3 phase induction motor
Power rating 200 kW
Speed 1485 rpm
4 pole
Frame size D315
Frequency 50 Hz
Voltage 415V delta 348V star
Insulation class F
IP55 enclosure rating
Duty S1
Power factor 0.84
Efficiency 95 percent
Weight 1044 kg
Made in Brazil.

Assorted Industrial Strapping Materials & Tools

Skylarc Ref C109380

Assorted Industrial Strapping Materials & Tools.
Various rolls of nylon Strapping, various metal and plastic cramps, Strapping Dispensing Trolley and stands, various crimping tools.
See photos for further details on included items.

Hafco Auto Part Washer APW-76

Skylarc Ref I109724

Hafco Auto Part Washer model APW-76.
Manufactured in 10/2020.
Single phase.
76L tank capacity.

2x Pallets of Stainless Steel Panels / Doors

Skylarc Ref C109770

2x Pallets of Stainless Steel Panels / Doors.
8x units total in auction.
Lengths from approx 570mm to 800mm.
Heights from 1250mm to 1350mm.
See photos for design details.

Exide Motive Power Forklift Battery Charger

Skylarc Ref W109400

Exide Motive Power battery charger
Model 23HFB 36V 120SUZ
DC output voltage 36 volts
DC output current 120 amps
Input three phase 400 volts
Input current 7.5 amps
Front panel digital control and display
Fitted with attached output cables
CE marked on enclosure
Safety test tag attached

Stainless Stel Centrifugal Pump w/ 15kW Electric Motor

Skylarc Ref I109308

Stainless Stel Centrifugal Pump w/ 15kW Electric Motor.
Stainless steel centrifugal pump.
Fitted with GEC TECO induction motor.
Motor power 15 kW.
Motor voltage 400V.
Motor current 25.9A.
Three phase.
50 Hz frequency.
Motor speed 2930 RPM.
Motor size 160M.
Class F insulation.
Serial number 4790140001.
Made in Taiwan by TECO.
Pump ID plate is mostly illegible.

2x Baldor/Nord DC Geared Motors w/ Control Electric Components

Skylarc Ref C109328

2x Baldor/Nord DC Geared Motors.
2 Baldor Reliance DC industrial motors included
Each motor rated at 3 horsepower
Motor speed 1750 RPM
Motor voltage 180 V DC
Motor current 14.7 amps
Motor frame 215C
Motor type 3668D
Motor field voltage 200 or 100 V
Motor enclosure TEFC
Continuous duty cycle
Nord Drivesystems gearbox type SK 32100 180TC1 on both units
Gearbox torque rating 10081 lb-in
Gearbox ratio 241.5 to 1
Service factor 1.30
Gearbox weight 79 lbs
Box of control gear included.
Control gear removed from switchboard.
Pallet lot contains two identical units.

Brook Compton 60kW Electric Motor

Skylarc Ref K109336

Brook Compton 60kW Electric Motor.
Brook Crompton electric motor
60kW power rating
1470 RPM
4 pole
D280S frame size
Approximate weight 710 kg
IP55 protection rating
Three phase AC motor
Rated insulation class F
Made in England
Year of manufacture 1995
Model number WDF280S
Serial number GEO14545
Design MCR
Operating frequency 50 Hz

RCM Brava F Electric Sweeper

Skylarc Ref V109373

RCM Brava F Electric Sweeper.
Poweed by 12V Battery (invluded).
500mm wide sweep.
Manufactured in 1996.
Older unit but operates well and moves easily. Front spinning brush needs a bristle head replacement as brush is too worn to reach the floor.

200L Drum Dispensing Trolley w/ Partial Oil Drum

Skylarc Ref W109374

200L Drum Dispensing Trolley w/ Partial Oil Drum.
Dispensing pump assembly Model "Mini 1500".
Includes approx 1/3 full 200L Drum of Metlube 315

Digital Platform Industrial Scale, 250kg Capacity

Skylarc Ref Z109377

Digital Platform Industrial Scale.
250kg max Capacity.
Platform 650x650mm and 220mm above floor.
Digital display unit is branded Rinstrom model R310.
Scale platform and frame appear to be from an older unit.

CigWeld Welder Generator (Faulty)

Skylarc Ref Y109480

Model MPM 8/255 I-HE
Brand Cigweld
Welder generator unit
Welding current range 15A to 255A
Three phase power output
Welding voltage 70V
Duty cycle 255A at 35 percent
Duty cycle 255A at 60 percent
Duty cycle 200A at 100 percent
Power output 8 kVA at 415V Y
Single phase output 7 kVA at 230V
Engine speed 3000 RPM
Power factor 0.8
IP23 enclosure rating
Control panel includes current and voltage regulator
Outputs labeled for work stick-TIG and MIG
Engine control panel with start and stop
Fuel gauge present
Sockets for 240V single phase and 415V three phase
Unknown fault doesn't power up

Circle Cutter

Skylarc Ref Z109481

Max diameter approx 440mm
Hand operated
Needs blades

EMF Spot Welder

Skylarc Ref A109482

Model Type TAE 6D
Serial number 139
Maximum continuous thermal rating 5.1 KVA
Manufactured by EMF Electric Co Ltd
Equipped with foot pedal control
Three phase

3x BioBubble Industrial Filter Cabinets w/ Accessories

Skylarc Ref Q109602

3x BioBubble Industrial Filter Cabinets w/ Accessories.
Three BioBubble industrial filter cabinets included Each 800x340x1400mm.
Model number AFH-HS
Filter type HEPA Pleat II
HEPA filter rating 99.97 percent
Filter size 24 inches by 12 inches by 11.5 inches
Each unit is on locking swivel castor wheels
Units feature protective blue covers
Each cabinet powered by an electric blower motor
Includes removable filter modules labelled with serial numbers 2322942, 2340705, and 2342064
Additional loose blue cover panels included
Power cables attached to units
Manufactured for BioBubble Inc by HEPA Corp
Made in Fort Collins Colorado

10 x Galvanized Steel Pallets

Skylarc Ref H109489

1370mm x 1370mm x 140mm thick galvanized steel pallets
Each pallet weighs 60kg
Total 600kg

10 x Galvanized Steel Pallets

Skylarc Ref I109490

1370mm x 1370mm x 140mm thick galvanized steel pallets
Each pallet weighs 60kg
Total 600kg

10 x Galvanized Steel Pallets

Skylarc Ref K109492

1370mm x 1370mm x 140mm thick galvanized steel pallets
Each pallet weighs 60kg
Total 600kg

10 x Galvanized Steel Pallets

Skylarc Ref L109493

1370mm x 1370mm x 140mm thick galvanized steel pallets
Each pallet weighs 60kg
Total 600kg

10 x Galvanized Steel Pallets

Skylarc Ref M109494

1370mm x 1370mm x 140mm thick galvanized steel pallets
Each pallet weighs 60kg
Total 600kg

Pallet of Galvanized Steel Sections

Skylarc Ref P109497

Assorted channel 200mm x 75mm and 125mm x 65mm
Angle mostly 60mm x 60mm and 50mm x 50mm
All short lengths
330kg total weight

Steel Platform Ramp and Frames

Skylarc Ref K109518

Steel platform or ramp and two frames included
Chequer plate measures 2350mm by 2000mm
Chequer plate is approximately 6mm thick
Frames measure 2430mm by 1570mm
Frames are made from 127mm deep I beams
Frames also use 100mm by 75mm angle irons
Visible surface rust present
Substructure is rusty

Assorted Industrial Valves

Skylarc Ref E109668

Assorted Industrial Valves.
Most are Keystone branded.
Electric and mechanical varieties.
Condition varies with each unit, see photos.

Sumitomo Cyclo Drive Reduction Box

Skylarc Ref G109540

Sumitomo Cyclo Drive reduction box
Model M 87-1
Input power 0.41 kW
Rated output speed 1500 rpm
Ratio 87
Output torque rating not legible
Manufactured by Sumitomo Heavy Industries Ltd Japan
Flange and V-belt pulley attached
Base mounting holes on housing

Geo Knight Benchtop Digital Swing Away Heat Press K20S

Skylarc Ref C109718

Geo Knight Benchtop Digital Swing Away Heat Press model K20S.
Single phase.
1800W
Top Press plate 520x420mm.
https://www.heatpress.com/products/16x20-digital-swinger

3x Steel Water Troughs / Water River Troughs

Skylarc Ref W109738

3x Steel Water Troughs / Water River Troughs.
Each approx 4800mm long, 600mm wide, 250mm deep.
Condmstructed from 4mm thick steel
Previously used to move harvested apples.
490kg total combined weight

Heavy Steel Platform / Pallet

Skylarc Ref U109762

Heavy Steel Platform / Pallet.
Box section frame, plate steel top.

7x Assorted Steel Pallets / Stillage Base Frames

Skylarc Ref V109763

7x Assorted Steel Pallets / Stillage Base Frames.
Lengths from 1100mm to 2400mm.
Widths from 890mm to 1210mm.
Heights from 120mm to 830mm
Condition varies with each unit.

Garden Lawn Roller

Skylarc Ref W109764

Garden Lawn Roller.
Appears custom made.
Roller cylinder 630mm diameter, 700mm wide.
274kg weight.

2x Stainless Steel Wall Panels

Skylarc Ref Y109766

2x Stainless Steel Wall Panels.
Each approx 2500mm long, 1500mm tall including support legs.
One panels has sensors installed at each end, see photos.

7x Assorted Steel Stands & Cabinets

Skylarc Ref Z109767

7x Assorted Steel Stands & Cabinets.
Includes:
4x matching 50x50mm box steel stands each approx 690mm long, 550mm tall.
1x galvanised angled brace or stand measuring approx 1070x470x780mm.
1x heavy sterl Cabinet/Machine base support in light grey approx 830x430x760mm.
1x heavy steel cabinet with wheels in medium Grey approx 600x550x670mm.
Condition varies with each item.

2x Stainless Steel Tanks

Skylarc Ref A109768

2x Stainless Steel Tanks.
Each approx 2100mm long, 340mm diameter.
66kg weight each tank.
Previous contents unknown.

Stainless Steel Table / Workbench

Skylarc Ref B109769

Stainless Steel Table / Workbench.
Adjustable base feet screws.
134kg weight.

Press Frame with Parker Air Ram

Skylarc Ref K109752

Press frame with Parker air ram
Stainless steel push plate
Plate dimensions are approximately 530mm by 310mm
Ram bore estimated at 220mm with approximately 450mm stroke
Space between frames is approximately 730mm wide
Full construction in steel
Air-operated Parker cylinder mounted to frame
Base includes fixed mounting points
Visible rust on frame and plate
No power or control equipment included

Stainless Steel Bench Frame

Skylarc Ref Q109784

Stainless Steel Bench Frame.
Adjustable feet.
Side frames 180mm deep.
Multi purpose frame unit.

Stainless Steel Catch Drip Tray

Skylarc Ref V109789

Stainless Steel Catch Drip Tray.
70mm centre drain.

Insulated Stainless Steel Cone Bottom Vat

Skylarc Ref I109776

Insulated stainless steel vat.
Inner cone bottom vat 316 grade stainless steel.
Outer skin is 304 grade stainless steel.
Internal diameter is 750mm.
Internal depth is 800mm plus 300mm deep cone.
Total weight is 175kg.

Stainless Steel Catch Drip Tray

Skylarc Ref W109790

Stainless Steel Catch Drip Tray.
70mm centre drain.

CEG 22kW Electric Induction Motor

Skylarc Ref B109301

CEG 22kW Electric Induction Motor.
1470rpm
198kg weight.
Shaft is 110mm long, 48mm diameter.
Shaft turns smoothly.

SEW Gearbox w/ 2.2kW Electric Motor

Skylarc Ref O109314

SEW Gearbox w/ 2.2kW Electric Motor.
SEW-Eurodrive gearbox and motor assembly
Gearbox type SA82 T DT100LS4
Gearbox output speed 9.5 rpm
Gearbox ratio 146.33:1
Hollow bore diameter 70mm
Designed for right angle drive configuration
Motor type DRE100M4/FG
Electric motor power 2.2kW
Motor voltage 230/400V Δ/Y or 220-242Δ/380-420Y
Motor current 8.20/4.70A
Motor rpm 1425
Three phase motor
Motor IP rating IP55
Motor efficiency 85.4 percent IE2

SEW Eurodrive Inline Gearbox w/ 7.5kW Electric Motor

Skylarc Ref P109315

SEW Eurodrive inline gearbox and electric motor assembly.
Motor type DFB132M4.
Gearbox type RXF101 DV132M4.
Electric motor power 7.5kW.
Three phase motor.
Motor voltage 400/690V.
Motor current 12.7/7.35A.
Motor speed 1430rpm.
Gearbox ratio 3.87 to 1.
Output speed 375rpm.
Output shaft diameter 50mm.
Motor duty S1.
Motor IP55 rated.
Lubricant MOBILGEAR 630.

3-Phase Extension Lead, 20-Metres

Skylarc Ref T109605

3-Phase Extension Lead.
20-Metres length.
6mm 4-core cable.
5-pin 32A plugs.

SEW Eurodrive Gearbox w/ 3kW Electric Motor

Skylarc Ref R109317

SEW Eurodrive gearbox with electric motor
Model KF87 DRE100LC4
3kW motor
Three phase
Right angle drive
Output speed 13 RPM
Output torque 2280 Nm
Input speed 1455 RPM
Efficiency 86.3 percent
Voltage 220-242V delta or 380-420V star
Frequency 50Hz
Thermal class 155(F)
Protection class IP56
Cos phi 0.81
Weight 138 kg

SEW-EURODRIVE gearmotor

Skylarc Ref K109362

SEW-EURODRIVE gearmotor model SA47/T DRS71M4
0.55 kW motor power
3 phase operation
Output speed 47 rpm
Right angle gearbox configuration
Hollow bore diameter 30 mm
Maximum torque 155 Nm
Motor speed 1360 rpm
Gear ratio 29.00
IP65 protection rating
Weight 19.631 kg
Connection voltage V220-242Δ/V380-420Y
Frequency 50 Hz
Efficiency class IE1 70.6 percent
Thermal class 155F
CLP HC-460-NSF-H1 oil for food applications 0.40 l
Manual isolator switch included.

Vintage Hot Water Boiler by R.W. Ellis w/ Ecoflam Burner

Skylarc Ref O109392

Vintage Hot Water Boiler model MK2, made in Dunedin by R.W. Ellis Ltd.
80,000 BTU/hrs.
Exhsust pipe 150mm diameter.
Attached is a newer Ecoflam single phase diesel burner model 4TC, manufactured in 2000.
Boiler age is unknown. Boiler is heavily rusted.

Mobile Adjustable Height Workbench

Skylarc Ref Q109706

Mobile Adjustable Height Workbench.
Inner lifting frame appears to have originally been a vintage hospital mobile bed frame which has been converted into this height adjustable mobile bench.
Outder panels and top are mostly MDF with some aluminium edging and sides.
Height adjustable from approx 640mm to 830mm.
Top surface weight capacity is unknown.

Vintage Roller Bender

Skylarc Ref V109711

Vintage Roller Bender.
Unknown manufacturer and model and age.
45mm diameter rollers approx 900mm in length.
Max material thickness capacity is unknown.

2x Stainless Steel Platform Franes

Skylarc Ref T109787

2x Stainless Steel Platform Franes.
Smaller unit is approx 785x465x350mm.
Larger unit is approx 1200x1000x1590mm with platform height approx 580mm.

SEW Eurodrive Gearbox w/ 1.5kW Electric Motor

Skylarc Ref M109312

SEW Eurodrive Gearbox w/ 1.5kW Electric Motor.
SEW Eurodrive gearbox with attached electric motor
Type SA72/T D T90LA
Output power 1.5kW
Three phase motor
Right angle gearbox configuration
60mm hollow bore
Output speed 11 RPM
Motor nameplate indicates 220-240/380-420V 50Hz
Model number 22014061 9512201
SEW Eurodrive New Zealand branding

SEW Gearbox w/ 2.2kW Electric Motor

Skylarc Ref N109313

SEW Gearbox w/ 2.2kW Electric Motor.
SEW-EURODRIVE gearbox and motor assembly
Type SA87T DY100M4
Rated power 2.2 kW
Three phase motor
Voltage 230V Delta or 400V Star
Motor speed 1410 rpm
Output speed 11 rpm
Right angle gearbox configuration
Gear ratio 128.4:1
Hollow bore 70mm
IP65 enclosure rating
Uses Mobilgear 636 lubricant
50 Hz frequency

2x Sew Eurodrive Gearboxes & Electric Motors

Skylarc Ref B109327

2x Sew Eurodrive Gearboxes & Electric Motors.
Includes two SEW-Eurodrive geared motors with attached conveyor drums.
One unit is SEW-Eurodrive type SA67 DT90S4-160
Motor rating 1.10 kW
Motor speed 1400 rpm
Output speed 22 rpm
Voltage 230V delta or 400V star
Current 4.68A delta, 2.80A star
Gear ratio 62.35:1
Protection class IP55
One drum is approximately 230 mm diameter and 530 mm wide.
The second motor is 2.2 kW according to handwritten note.
Second drum approximately 280 mm diameter and 640 mm wide.
Output of the 2.2 kW motor is unknown.
Both motors are three phase.

Air Scroll Fan FDA 560 TM D50

Skylarc Ref I109412

Model FDA 560 TM D50
Code CEAA1315002
Serial 00W02414-JF00450KA
Double entry air scroll fan
Inlet diameter 450mm
Outlet size 700mm x 700mm
Shaft size 50mm
Scroll outer diameter 560mm
Weight 172kg
Made in Singapore
AMCA certified for sound and air performance

Stainless Steel Electrical Component Cabinet

Skylarc Ref C109302

Stainless Steel Electrical Component Cabinet.
Double doors with locks, keys are missing.
See photos for details on electrical components included within cabinet.

7.50-15 Tieflader Tyres Continental Bandag Recaps

Skylarc Ref N109417

Pair of 7.50-15 Tieflader tyres.
Brand is Continental.
Recapped by Bandag.
Tread marked Bandag C.B.4.
12 ply rating.
Tyres are new recaps.
Size on sidewall: 7.50-15.
Pattern marking: Tieflader.

Conveyor Roller Sections Lot

Skylarc Ref R109421

Lot of 4 conveyor roller sections.
Three straight sections ranging from 1.4m to 2.2m length.
One curved roller unit included.
Rollers are 540mm long and 50mm diameter.
11mm steel hex shafts.
Sold as one lot.

Assorted Solid Forklift Tyres

Skylarc Ref P109419

Assorted solid forklift tyres included.
2 units sized 260 x 152 x 158.5 Dunlop brand.
2 units sized 356 x 114 x 203.2 AD-Trak brand.
1 unit sized 17 x 6 x 12 1/8.
1 unit sized 17 x 5 x 12 1/8.
1 unit sized 16 x 3.5 x 12 1/8.
1 unit sized 13 x 3.5 x 8.
1 unit sized 10 x 3 x 8.
Tyres shown are of solid construction.
Multiple brands identified including Dunlop and AD-Trak.
Sizes and quantities as listed are based on visible information.
All tyres are solid style for forklift use.

GEC Smokespill Aerofoil Fan w/ 7.5kW Electric Motor

Skylarc Ref T109319

GEC Smokespill Aerofoil Fan w/ 7.5kW Electric Motor.
GEC Smokespill Aerofoil Fan
Blade diameter is 900mm
Fitted with a 7.5kW Brook Hansen electric motor
Three phase motor
Motor speed is 1450 RPM
Motor type is Brook Hansen LD4L032XMDA-H
A.C. motor IEC34 made in E.U.

Stainless Steel Electric Conveyor Belt

Skylarc Ref T109423

Stainless steel frame electric conveyor belt
Conveyor is 950mm long and 500mm wide
Equipped with a flat belt showing visible wear
Three phase motorized drum
Travels 1 meter in 6 seconds
Fitted with industrial power plug
Plug is 3 phase 16 amp
Conveyor is supported by four legs with a cross brace for stability

DE Coiling Jig Stand

Skylarc Ref X109323

DE Coiling Jig Stand.
Suitable for coils of steel, etc.
Ball bearing Taper cone heads.
Cone inner diameters 460mm, outer diameters 600mm.
Heavy Duty square in and out adjustment.

Assorted Solid Forklift Tyres

Skylarc Ref U109424

Lot of assorted solid forklift tyres.
Two tyres sized 22 x 8 x 16 Dunlop.
Four tyres sized 20 x 6 x 16 Dunlop.
Two tyres sized 18 x 5 x 11 1/4.
Tyres are solid construction.
Dunlop Commercial Cushion markings visible on some tyres.
No rims included.

4x 8.25-15 Solid Cushion Heavy Duty Tyres

Skylarc Ref V109425

Marked 8.25-15/6.5.
Brands visible are Avon Caribou and Bergougnan.
Tyres are solid cushion type.
8.25-15/6.5 solid cushion with wheels.
2 with steel wheels 8 bolt holes.

Workshop Shelving Unit

Skylarc Ref Y109428

Steel construction storage cabinet
Multiple fixed pigeon hole compartments
Suitable for storing parts or hardware
Cabinet includes 24 open cubby holes
Cubby holes have front edge labelling
Surface shows visible rust in some areas
Sides and back are solid steel panels

Sand Hopper on Caster Wheels

Skylarc Ref E109434

Sand hopper on caster wheels
Ex foundry sand casting equipment
Diameter is 760mm
Depth is 700mm
Weight is 296kg
Unit has a metal tank mesh lid
Fitted with a control box and attached red hose
Mounted on four caster wheels for mobility
Metal construction throughout
Markings on the tank include 296kg and serial numbers

Sand Hopper Ex Foundry Sand Casting

Skylarc Ref F109435

Sand hopper ex foundry sand casting
Diameter 760mm
Depth 700mm
Weight 206kg
Equipped with control box
Control box includes transfer time and load time dials
Steel construction
Lid with partial mesh grate
Hopper mounted on fixed legs

2x Brown Boveri Geared Electric Motors

Skylarc Ref H109333

Includes 2 Brown Boveri geared electric motors
Power rating is 1.1 kW each
Three phase operation
Equipped with Kissling and Co gearboxes
Gearbox type TU 43
Gearbox rated at 1.1 kW
Output speed is 14 RPM
Output shaft diameter is 50 mm
IEC 34-1 standard compliance
Motor voltage is 230V Delta or 400V Star
Frequency is 50 Hz
Motor speed is 1410 RPM
IP44 protection rating
Made in France by Brown Boveri
Gearboxes made in Switzerland.

Workshop Shelving Unit

Skylarc Ref Z109429

Steel construction storage cabinet
Multiple fixed pigeon hole compartments
Suitable for storing parts or hardware
Cabinet includes 24 open cubby holes
Cubby holes have front edge labelling
Surface shows visible rust in some areas
Sides and back are solid steel panels

Workshop Shelving Unit

Skylarc Ref A109430

Steel construction storage cabinet
Multiple fixed pigeon hole compartments
Suitable for storing parts or hardware
Cabinet includes 24 open cubby holes
Cubby holes have front edge labelling
Surface shows visible rust in some areas
Sides and back are solid steel panels

Workshop Shelving Unit

Skylarc Ref C109432

Steel construction storage cabinet
Multiple fixed pigeon hole compartments
Suitable for storing parts or hardware
Cabinet includes 24 open cubby holes
Cubby holes have front edge labelling
Surface shows visible rust in some areas
Sides and back are solid steel panels

Workshop Shelving Unit

Skylarc Ref D109433

Steel construction storage cabinet
Multiple fixed pigeon hole compartments
Suitable for storing parts or hardware
Cabinet includes 24 open cubby holes
Cubby holes have front edge labelling
Surface shows visible rust in some areas
Sides and back are solid steel panels

Pallet Lot VEE Pulleys 10 Groove C Section Taper Lock Centre

Skylarc Ref I109438

Pallet lot of VEE pulleys included.
2 units with 410mm diameter and 10 Groove C Section.
Each 410mm pulley has a taper lock centre.
410mm taper lock is 5050 series with 95mm bore.
3 units with 670mm diameter and 10 Groove C Section.
Each 670mm pulley has a taper lock centre.
670mm taper lock is 5050 series with 100mm bore.
Grooves are stated to be in good condition and are not worn.
Total lot weight is 880 kilograms.

Assorted Wall Mount Shelving Brackets

Skylarc Ref Y109350

Assorted Wall Mount Shelving Brackets.
Includes:
20x wall mounted vertical bars in lengths from approx 1480mm to 2000mm. 25mm widths each.
Includes a number of steel shelving brackets that hook into vertical bars.
Includes bracket sizes:
34x 250mm.
5x 300mm
4x 350mm.
26x 500mm.

Electric Tilting Table with 0.75kW 3 Phase Motor and Lenze Gearbox

Skylarc Ref J109465

Electric tilting table designed for horizontal to vertical adjustment
Previously used as an adjustable bed or table for medical equipment
Fitted with a 3 phase 0.75kW braked motor
Equipped with a Lenze gearbox with double shaft output
Gearbox output runs at 9 rpm
Drive belt visible under base structure
Metal frame construction
Runs on three phase power supply
Adjustment is motor driven

Weavexx BlueMaxx MP Drying Fabric 22.15 x 2.31M

Skylarc Ref K109466

Weavexx drying fabric
Design BlueMaxx MP
Size 22.15 x 2.31 metres
Seam type Express
Machine number 2
Position 3B
CFM 400
Order number 806120
Includes original crate
Includes associated documentation

Ozark Six Shooter Stud Welder

Skylarc Ref Z109455

Ozark Six Shooter Stud Welder.
Part No.017063
Welder measures approx 640x310x310mm.
Max stud diameter 3/8" (9.5mm)
Includes assorted cabling and wood case.

19-Core Copper Mulri Core Flex Cable, 83-Metres

Skylarc Ref P109367

19-Core Copper Mulri Core Flex Cable.
83-Metres remaining on spool.
19-core x 2.5mm² tricab multiple.
Approx 112kg weight on spool.

Aflex 4-Core Copper Flex Cable, 77m Total Lengths

Skylarc Ref Q109368

Aflex 4-Core Copper Flex Cable.
35mm² copper 4-core cable.
2x Lengths on spool, 53m and 24m lengths.
Approx 170kg gross cable weight.

30-Core Copper Flex Cable

Skylarc Ref R109369

30-Core Copper Flex Cable.
30 Core x 1.5mm²
Approx 42kg weight.
Length remaining on spool is unknown.

Hako Flipper Push Sweeper

Skylarc Ref Y109376

Hako Flipper Push Sweeper.
Made in Germsny.
450mm brush width.
Functions normally.

4-Core Copper Flex Cables, 3x Lengths on Spool

Skylarc Ref A109378

4-Core Copper Flex Cables.
25mm² size.
3x Lengths on spool, each 17m, 10m, and 12m.
Approx 148kg combined weight.

Louis Eichman Grinder

Skylarc Ref C109484

Louis Eichman Copy Grinder
On stand
Range of grinding wheels and accessories
Three phase

Assorted Industrial Electrical Controllers, Components, & More

Skylarc Ref H109619

Assorted Industrial Electrical Controllers, Components, & More.
Various used plugs, fans, temperature controls, gauges, digital readout, switches, and more.
See photos for further details on included items.
Condition varies with each item.

50x Rubber Pipe Reducers, 180mm to 130mm Size

Skylarc Ref I109620

50x Rubber Pipe Reducers.
All are 180mm on wide end to 130mm on narrow end.
130mm lengths.
Stainless steel hose Clamps attached.
Made by Fernco Joint Sealer Co.
Items appear unused but dirty from open box storage.

4-Leg Lifting Chain Assrmbly, 6.7-Ton Max Rated

Skylarc Ref D109641

4-Leg Lifting Chain Assrmbly.
1500mm Chain Lengths.
Max lifting raining 6.7 ton.
Certification tag expired in 2016.

Lincoln Electric Invertec PC60 Plasma Cutter

Skylarc Ref L109649

Lincoln Electric Invertec PC60 Plasma Cutter.
3-phase 32A plug.
Includes Trolley and Cabling on Trolley.
Powrws on but has faulty safety catch trigger.

25x Assorted Vintage Wrenches, Spanners

Skylarc Ref R109655

25x Assorted Vintage Wrenches, Spanners.
Most are Imperial sizes up to 1".
Assorted brands and conditions

Steel Plate Rack

Skylarc Ref J109517

Made of 155 UC beams
Base is 200 UC I beam
2 metres long
1.7 metres tall
Weight is 276 kilograms
Steel construction
Yellow painted finish

Box Section Table Frame Jig and Steel Frame Pallets

Skylarc Ref L109519

Box section table frame jig included
Frame jig made of 76 x 76 box section
Dimensions approximately 1.4 metres wide and 5 metres long
Legs are 380 millimetres tall
Includes two steel frame pallets

4x Vintage 1/2" Drive Socket Sets

Skylarc Ref V109659

4x Vintage 1/2" Drive Socket Sets.
Sets with mixed bands including Tipco, Stahlwille, Sidchrome, Britool, Cohen, and more.
Mostly imperial sizes.
Older vintage Sets with rusty steel cases.

David Brown Tractors Mower Frame

Skylarc Ref C109536

Manufacturer is David Brown Tractors Ltd
Type is M1D3
Serial number is 10272
Steel frame construction
Fitted with three wheels
Two solid steel wheels at the rear
One pivoting caster wheel at the front
Equipped with a screw jack at the front
Tow bar with hole for pin connection

Koreel Retractable Air Hose Reel w/ Hose

Skylarc Ref Q109680

Koreel Retractable Air Hose Reel w/ Hose.
Model No.RA-825N
360mm diameter reel.
10mm size Air Hose, length unknown.

2 x Pallet Stillages

Skylarc Ref I109542

2130mm x 980mm x 460mm tall

Assorted Galvanized Rod Bars

Skylarc Ref U109554

Assorted galvanized rod bars.
Diameters range from 13mm up to 32mm.
Lengths up to 3.4m long.
Total weight is 480kg.

Freezing Works Processing Saw Tool Assembly

Skylarc Ref O109704

Freezing Works Processing Saw Tool Assembly.
Manufactured by Realcold Milmech Ltd.
Powerd by a Weg 0.25kw 2880rpm 3-phase motor.
Unknown if Assembly is used.

Vintage Vac-O-Jack Single Phase Dust Extractor Assembly

Skylarc Ref P109705

Vintage Vac-O-Jack Single Phase Dust Extractor Assembly.
Model number unknown.
Poweed by a 1hp 2800rpm Single phase motor.
Age of unit unknown.

Bundle of Galvanized Reid Bars

Skylarc Ref V109555

Bundle of galvanized Reid Bars
Diameters include 20mm and 25mm
Assorted lengths up to 3 metres long
Total weight is 520 kilograms

Heavy Wall Drill Pipes 4m 155mm OD

Skylarc Ref X109557

Lot of 3 heavy wall drill pipes
Each pipe is 4 meters long
Outer diameter is 155mm
Wall thickness is 12mm
Each pipe has threaded connections at one end
Total weight is 742 kilograms

SC Color Digital Print Baking Machine STL-HX-08

Skylarc Ref S109708

Manufacturer is Zhongshan Shen Cai Digital Print Machine Co Ltd
Model is STL-HX-08
Rated voltage is 220V 50Hz
Prime power is 10kW
Control panel includes three heater zones
Heater zone dials are marked Heater No 1 Heater No 2 Heater No 3
Baking time is controlled using an Omron timer dial
Manual operation button present
Main breaker is CHINT DZ47LE-63 C60
Machine frame is metal with casters for mobility.
Fans visible on the working surface
Heating elements are mounted beneath the upper assembly
Produce date is marked as 12/2016

PowerPac Site Ventilation Fan, 300mm

Skylarc Ref A109716

PowerPac Site Ventilation Fan.
Model No PSF300.
300mm diameter fan.
Flowrate 65m²/min
Single phase.
Overall dimensions 375x380x450mm.

Industrial Side Channel Blower w/ Single Phase Motor

Skylarc Ref I109698

Industrial Side Channel Blower w/ Single Phase Motor.
Model No.XGB-12A
1.5kW 2850rpm single phase motor.
26kpa, 150m²/h Air flow.
60mm diameter pipe connetion.

Geo Knight Benchtop Digital Twin Cap Press K7T

Skylarc Ref D109719

Geo Knight Benchtop Digital Twin Cap Press model K7T.
Single phase.
350W
https://www.heatpress.com/products/digital-knight-4x7-twin-cap-press

Insta Heat Press Model 138

Skylarc Ref F109721

Insta Heat Press Model 138.
Made in USA by Insta Graphic Systems in 2006.
Top Heat plate 530x400mm.
Stand mounted on castors for mobility.

Steel Fire Pit Drum Tank 1270mm Diameter

Skylarc Ref O109574

Steel drum with open top.
Diameter is 1270mm.
Height is 1200mm.
Total weight is 190kg.
Drum has visible rust and flaking exterior coating.
There is a drainage or outlet fitting at the base.

Vintage 2000kg Capacity Pallet Jack, Faulty

Skylarc Ref M109728

Vintage 2000kg Capacity Pallet Jack.
Manufactured by Mason Mesco Ltd.
Model No.44
Max capacity 4400 lbs (2000kg)
Fork height from approx 90mm to 180mm.
Fork lengths 1080mm, widths 155mm, gap between forks 370mm.
Condition - Jack will lift itself but cannot lift any load. Will need servicing.

2 x Steel Cable Reel 2.4m Diameter

Skylarc Ref Q109576

Two steel cable reels included in lot
Each reel has a diameter of 2.4 metres
Each reel is 1250 mm wide
Each reel weighs 410 kg
Total weight for both reels is 820 kg
Reels are constructed from steel
Orange paint finish with blue metal bracing
Both reels to be sold together as a single lot
Great giant motorbike sculpture

Reinforcing Deformed Steel Bars 32mm 1.7m

Skylarc Ref X109583

Reinforcing deformed bars
Steel construction rods
Approximate length is 1.7 meters per bar
Approximate diameter is 32 millimeters
Total weight is 728 kilograms

Steel Fabricated Ladders and Grating Panels Lot

Skylarc Ref T109579

Lot includes steel fabricated ladders and steel grating panels
One ladder is 2.6 metres long and 320 millimetres wide
One ladder is 5.6 metres long and 460 millimetres wide
Grating panels included are a mix of sizes largest is 1200mm x 910mm
Ladders are constructed from steel with welded rungs
Grating panels are made from steel and have rectangular grid pattern
Surfaces of ladders and some grating panels show visible rust
All items are sold together as one lot

Deformed Steel Bar Reinforcing Rods

Skylarc Ref W109582

Deformed steel bar reinforcing rods.
Lengths range from 2.4 metres to 2.8 metres.
Approximately 32mm outside diameter.
Total weight is 930 kilograms.

Assorted Stainless Steel Safety Railings

Skylarc Ref P109731

Assorted Stainless Steel Safety Railings.
Made from 50mm diameter stainless tube.
Stainless grade unknown.
Lengths up to 3000mm.
Some self supporting, others require wall mounting.
Approx 14 individual units.

Stainless Steel Carton Chute Slides

Skylarc Ref Q109732

Lot of 5 stainless steel carton chutes or slides
Each chute is 400mm wide
Each chute is 240mm deep
Each chute is 2.4 metres long
Designed to slide cartons down
All measurements are approximate
Chutes are constructed from stainless steel, grade unknown.

Stainless Steel Tapered Hopper / Chute

Skylarc Ref T109735

Stainless Steel Tapered Hopper / Chute.
Measures 1400x1300x1200mm (currently is stored upside down).
Square outlet 450x450mm.
Built in washing nozzles and piping.
Also Includes the 2040x875x1790mm steel stillage the hopper is sitting on in photos.

5x Assorted Mesh Steel Cage Stillages

Skylarc Ref Z109741

5x Assorted Mesh Steel Cage Stillages.
Four units are Stackable together, each measuring 1180x800x1150mm.
A fifth unit is of similar design but larger at 1180x1180x880mm.
Very rusty surfaces.

4x Assorted Steel Stillages

Skylarc Ref C109744

4x Assorted Steel Stillages.
Sizes are the following:
1080x980x600mm.
1130x1130x960mm.
1280x900x1150mm.
1425x890x1365mm.
Condition varies greatly with each unit.

3x Heavy Steel Stillages

Skylarc Ref D109745

3x Heavy Steel Stillages.
One unit is 2160x910x1780mm.
Two units are 2050x860x1780mm, with one missing horizontal tracking bars on vertical columns.
Condition varies with each unit.

Heavy Duty Steel Pallet Stillage Frame

Skylarc Ref I109750

Steel pallet stillage frame
Rectangular structure with four upright posts
Constructed from heavy duty steel
Visible surface rust present
Four-way forklift entry base

Engine Plant Room Ventilation Frames

Skylarc Ref G109592

Two engine or plant room ventilation frames are included.
Frames are constructed from aluminium.
Each frame measures 2020mm by 2040mm.
Each frame weighs 60 kilograms.
Total lot weight is 120 kilograms.
Both frames are blue in colour.
Frames feature slatted construction.

Stainless Steel Industrial Computer Cabinet Enclosure

Skylarc Ref D109771

Stainless Steel Industrial Computer Cabinet Enclosure.
Front windowed access door with lock, key is missing.

2x Stainless Steel Heating/Cooling Table Tops

Skylarc Ref E109772

2x Stainless Steel Heating/Cooling Table Tops.
Both matching units have a dimple plate attached to underneath for pumping hot or cold water through, see photos.
Each table top is 950x700mm.
Approx 20kg each.

Steel Pipe Cradles and Shelf Brackets

Skylarc Ref O109756

Lot includes steel pipe cradles and shelf brackets.
Five steel pipe cradles for 400mm diameter pipes are present.
Cradles are constructed from steel with black surfaces on contact areas.
Two 1650mm x 900mm angle brackets made of 75mm heavy iron are included.
One steel disc with 520mm diameter and 12mm thickness is included.
All items are shown on the pallet in the images.

Stainless Steel Trolley and Stand

Skylarc Ref P109757

Includes one trolley and one stand
Trolley has two brake swivel casters
Trolley dimensions are 430mm x 710mm x 350mm tall
Stand has adjustable level feet
Stand dimensions are 500mm x 430mm x 800mm tall
All components are stainless steel

2x Stainless Steel Troughs / Trays

Skylarc Ref R109785

2x Stainless Steel Troughs / Trays.
Larger unit is 5300x800x100mm.
Smaller unit is 4400x200x170mm.
132kg combined weight.

Bin of Assorted Stainless Steel Flues / Ducting Tubes

Skylarc Ref S109786

Bin of Assorted Stainless Steel Flues / Ducting Tubes.
Most are approx 350mm diameter with some other narrower units also included.
Longest unit approx 2650mm long.

Freezing Works Processing Machine

Skylarc Ref J109777

3 phase geared motor drive
Rollers to squeeze something
Stainless steel screening drum
Drum dimensions approximately 500mm diameter by 600mm long
Mono pump 25mm for wash bar
Air diaphragm pump 25mm
Overall dimensions approximately 1.63m x 1.2m x 1.45m tall
Weight 284kg

Vintage Wheels and Cast Base Assortment

Skylarc Ref L109779

Includes one spoked cast pulley 640mm diameter by 140mm wide
Includes two steel disc cogs 600mm diameter each
Includes one cast base 600mm by 600mm
Total of four items
All items are metal construction
The spoked pulley is orange with a central hub
The steel disc cogs have a central hole
The cast base features a frame with metal rods and a flat rusted platform

Assorted 4mm Stainless Steel Plates and Covers

Skylarc Ref N109781

Lot of assorted 4mm thick stainless steel plates and covers
Pieces include folded and flat plates
Some plates have one side fold and drilled holes around edges
Large piece measures approximately 1130mm long by 530mm wide
Includes 3mm thick folded channels approximately 1m long
Includes 2mm thick folded trays approximately 960mm by 400mm
Manufactured by TCA
Label: TCA Industrial Control Applications
Label: Part number 109781
Stainless steel construction

HunterLab SpectraTrend HT Color Monitoring Unit

Skylarc Ref B109795

HunterLab SpectraTrend HT model shown on label.
Serial number 15000022 indicated on label.
Control unit with LCD display and membrane keypad.
Cables are attached to the unit.
Metal case with latch closures and carry handle included.
Model manufactured by HunterLab Reston VA.

Squeeze Roller Wringer Machine

Skylarc Ref O109782

Squeeze roller wringer machine
Rubberized rollers are 1100mm long and 200mm diameter
Shaft and bearings are 38mm
3 phase geared motor drive required
Weight is 465kg
Dimensions approximately 1.68m x 1.1m x 1.9m tall
Stainless steel frame and housing
Manual handwheel adjustment mechanism present
Protective guard on roller ends

13 Taper Shank Drills

Skylarc Ref A109794

Imperial sizes

Danfoss Variable Speed Drive

Skylarc Ref F109799

Brand: Danfoss
Model: VLT AutomationDrive
Type code: FC-302P3K0T5E66H1XGX1XXSXXXXAXBXCXXXXDX
Part number: 131B8817
Rated power: 3.0kW at 400V or 4.0HP at 460V
Input: 3x380-500V 50/60Hz 6.5/5.7A
Output: 3x0-Vin 0-1000Hz 7.2/6.3A
Ambient temperature rating: 45°C or 113°F
Integrated display and keypad interface
Listed to UL standards
www.danfoss.com

High Pressure Air Fan w/ 4kW Electric Motor

Skylarc Ref J109309

High Pressure Air Fan.
Fitted with WEG brand electric motor.
Motor power rating 4kW
Three phase motor.
Motor speed 2880 RPM
120mm diameter inlet
80mm diameter outlet
Motor model 3~112M
Rated for IP55
Made in Brazil

4x Coils of Renold 16B Roller Chain

Skylarc Ref U109320

Renold 16B roller drive chain
4 coils total
Approximate lengths are 6.2 metres 20.0 metres 14.5 metres and 10.0 metres.
Total length is approximately 50.7 metres.
Joiner link every 13 links.
Stud is 8mm.
1 inch pitch roller chain.
Pallet lot gross weight 180 kilograms.

5x Coils of 1-inch Pitch Roller Chain

Skylarc Ref V109321

5 coils of 1-inch pitch roller chain.
Renold 16B chain.
Approximate lengths per coil: 9.8 meters, 9.2 meters, 12.2 meters, 14.2 meters, 10.6 meters.
Total length approximately 55.4 meters.
Chains are riveted type.
Pallet gross weight is 194 kilograms.
Joiner link every 13 links.
8mm stud.
1" pitch.
Chains appear to be mixed lengths as measured on pallet.
Chains are loose and not boxed.

6x Assorted 3-Phase Electric Motors w/ Gearboxes

Skylarc Ref D109329

Lot of 6 assorted 3-phase electric motors with gearboxes.
- SEW Eurodrive inline motor type R47 A rated at 0.37kW and 62 RPM.
- REM IE1 Series type MS 801-19-6 hollow bore motor rated at 0.37kW with 9 RPM output.
- ZAE Hamburg 3-phase double output motor type CM 80S/4D rated at 0.55kW and 22 RPM.
- Flender geared motor inline rated at 2.2kW and 165 RPM.
- M.T. Motori Elettrici type TN71B/4 hollow bore motor rated at 0.37kW, RPM not specified.
- Getriebebau Nord geared motor type SK255F with 3.3kW output and 212 RPM.

Hills Branded Vintage Shear + Woden Viking Pipe Vice w/ Stand

Skylarc Ref Z109325

Hills Branded Vintage Shear, made in England, model number unknown, 80mm long jaws.
Woden Viking Pipe Vice, made in England, model number unknown.
Includes heavy steel stand Approx 750x450x745mm.

8x Assorted 3-Phase Electric Motors

Skylarc Ref E109330

Lot includes several electric motors and one geared motor.
Brands visible include Brook Hansen, WEG, Loher, Bauer, Invensys, ASEA, and CMG.
- Loher GmbH 3~Mot A160M1A-2 motor rated 11 kW 420 V 2910 RPM 50 Hz.
- Brook Hansen motor 0.75 kW 1410 RPM 220-240V Δ 380-415V Y 50 Hz.
- WEG 90L motor 2.2 kW 220 V Δ 380 V Y 2830 RPM 50 Hz.
- Bauer geared motor type MA87-32G DKF 66404/165 1.9/0.18 kW 850/19 rpm 220-380 V 50 Hz.
- Invensys Crompton Brook 0.75 kW 1410 RPM motor.
- ASEA motor label visible, 1.5 kW 1400 RPM listed.
- CMG and WEG motors also present, details not fully legible from images.

4x Lowara Pumps w/ 3-Phase Electric Motors

Skylarc Ref I109334

Lot includes four Lowara 3 phase centrifugal pumps.
Three pumps are stainless steel construction.
One pump is flanged cast iron construction.
- Model FHE 32-125/11/A with 1.5 Hp motor, 1.1 kW, 230/400V, 4.32/2.81A, 2840 rpm, IP55.
- Model CEA80/5/A with 0.75 kW motor, 220-240V/380-415V, 3.65/2.11A, IP55.
- Model CEA370/3/A with 1.85 kW motor, 220-240V/380-415V, 8.63/4.98A, IP55.
- Model GE4370/3 with 1.85 kW motor, voltage and current ratings not fully legible on label, IP55.

All pumps manufactured by Lowara, Montecchio Maggiore, Italy.
All pumps are three phase design.
Physical condition as pictured.

Siemens PlanoFlex 12-Core Copper Cabling

Skylarc Ref T109371

Siemens PlanoFlex 12-Core Copper Cabling.
Siemens PlanoFlex 12-core cables
One reel.
Cable is comprised of two lengths each 40 meters.
Conductor size is 2.5mm² copper.
600 volt rating.
Rated to 90 degrees Celsius.
14 AWG 12 core outdoor cable.
Type NGFL60EU-J 12x2.5VDE.
Total weight 67 kilograms.

Industrial Sandblasting Pressure Cylinder

Skylarc Ref T109397

Industrial Sandblasting Pressure Cylinder.
Unknown brand/model and age.
Cylinder measures approx 520mm diameter, 850mm high.
Unknown operational condition of item.

Vintage Industrial Table Saw.

Skylarc Ref N109391

Vintage Industrial Table Saw..
ID plate missing so brand/mode, agel and specs unknown.
350mm diameter blade mounted.
3-phase power.
Operational conditiin unknown.

Bush/Weg Vacuum Pump Assembly, 3-Phase

Skylarc Ref R109395

Bush/Weg Vacuum Pump Assembly.
Motir is a Weg 3kW, 1425rpm 3-phase motor.
No visible ID plate for pump.
Hand written note on pump states leaking seals?

Assorted Demag Branded Lifting Crane Parts / Components

Skylarc Ref S109396

Assorted Demag Branded Lifting Crane Parts / Components.
Includes two Demag pendant controllers with cables.
Includes two Demag electric motors with attached gearboxes.
Includes two blue Mannesmann Demag motors and gear units.
Blue Mannesmann Demag motor type KBF 90 A 4, 0.53kW, 230/400V, 50Hz, 1350 t/min.
Brown Demag hook block assembly marked 3000kg capacity.
Includes two black plastic or composite split ring components.

Industrial Electrical Cabinet w/ Installed Contents

Skylarc Ref X109635

Industrial Electrical Cabinet w/ Installed Contents.
See photos for details on included electronic control itens installed within cabinet.

Terasaki Tembreak 400A Circuit Breaker XS630NJ

Skylarc Ref Y109636

Terasaki Tembreak 400A Circuit Breaker.
Model No. XS630NJ.

Grundfos Industrial Pump

Skylarc Ref B109639

Brand: Grundfos
Model: NBE32-200/216-A-F-A-BAQE
Model number: A96538993P2072600024
Flow rate: 18.4 m3/h
Head: 17 m
Rotational speed: 1400 min-1
Pressure/temperature rating: 16/120 bar/°C max
Made in Hungary.

Assorted Vintage Lifting Assemblies, Clamps, Wire Rope, & More

Skylarc Ref E109642

Assorted Vintage Lifting Assemblies, Clamps, Wire Rope, & More.
See photos for further details on included items.

8x 1" Drive Sockets + Breaker Tee Bar

Skylarc Ref Q109654

8x 1" Drive Sockets of various sizes, most with illedgible size markings.
Includes 500mm long 1" Drive breaker tee bar tool.

Keystone Butterfly Valve, 250mm

Skylarc Ref B109665

Keystone Butterfly Valve.
250mm inner diameter.

Load-Loc Branded Winch Assembly

Skylarc Ref D109667

Load-Loc Branded Winch Assembly.
Model and capcitirs unknown.
Measures approx 280x210x110mm.

Industrial Butterfly Valve, 300mm dia

Skylarc Ref F109669

Industrial Butterfly Valve.
300mm diameter.
Model VF733
Disk CF8M
10 BAR rating.

Industrial Butterfly Valve, 300mm dia

Skylarc Ref G109670

Industrial Butterfly Valve.
300mm diameter.
316 grade stainless sterl disk CF8M
PN16 press grade.

2x Vintqge Air Impact Wrenches w/ Assorted Hoseas, Line Lubricators

Skylarc Ref W109686

2x Vintqge Air Impact Wrenches w/ Assorted Hoseas, Line Lubricators.
1/2" Drive Impact Wrench of unknown brand/model.
3/4" Drive Atlas Copco type W2215 wrench.
Inclides attached vintage airlines plus a number of loose old style line Couplings and line lubricators, see photos.

Industrial Mobile Machine Control Cabinet

Skylarc Ref W109712

Industrial Mobile Machine Control Cabinet.
Unknown manufacturer/model.
On wheels for mobility.
Originsl Electronic componets are missing.
Lockable door, key is missing.
See our other listing for a second matching unit.

Industrial Mobile Machine Control Cabinet

Skylarc Ref X109713

Industrial Mobile Machine Control Cabinet.
Unknown manufacturer/model.
On wheels for mobility.
Originsl Electronic componets are missing.
Lockable door, key is missing.
See our other listing for a second matching unit.

Vintage Greenlee Hydraulic Pipe Pusher Model 790

Skylarc Ref E109720

Vintage Greenlee Hydraulic Pipe Pusher.
Model 790.
2000mm long main rail.
Includes Clamps for 2", 3", and 4" pipes.
Includes 2x wooden storage boxes.

3-Core Neutral Screen Cable

Skylarc Ref G109722

3-Core Neutral Screen Cable.
3x 120mm² aluminium cables with copper neutral screen wrapping.
Total outer diameter 35mm.
Length approx 25-30 metres.

Mobile Plastic Bin Trolley

Skylarc Ref H109723

Mobile Plastic Bin Trolley.
Inner dimensions of bin are approx 650x650x520mm.
Castors roll easily.

Fiberglass Water Wheel, 1300mm dia

Skylarc Ref U109736

Fiberglass Water Wheel.
1300mm diameter, 500mm tall.
790mm centre hole.

2x Stainless Steel Electrical Control Boxes w/ Contents

Skylarc Ref I109802

2x Stainless Steel Electrical Control Boxes w/ Contents.
Both appear to be identical Assemblies.
Each stainless box is 300x250x150mm.
See photos for details on included electronic items.

Stainless Steel Electrical Box w/ Contents

Skylarc Ref K109804

Stainless Steel Electrical Box w/ Schneider Branded Electronic Equipment Installed.
Msin Schneider unit inside is model Altivar 61.
See photos for details on other Schneder branded units within.
Stainless box is 400x400x200mm.

Length of Copper Pipe, 3900x150mm

Skylarc Ref M109338

Length of Copper Pipe.
3900mm long, 150mm diameter, 2mm thick.
Approx 34kg weight.

3x Copper Elbow Piping

Skylarc Ref N109339

3x Copper Elbow Piping.
Two are 1400mm long, 100mm diameter.
One is 1400mm limg, 60mm diameter.
Total combined weight approx 16kg.

4-Core Copper Flat Cable, 40m

Skylarc Ref U109372

4-core copper lay flat flex cable
Length is 40 metres
Estimated 25mm2 or 35mm2 cross section per core.
Copper conductor diameter approximately 8mm.
Contains 4 cores.
Overall cable profile is 45mm by 15mm.
Total weight is 67kg.

4x Cooper Trendsetter SE Tyres w/ White Sterl Wheels, P215/75R15

Skylarc Ref I109386

4x Cooper Trendsetter SE Tyres w/ White Sterl Wheels.
Tyres are size P215/75R15 with white wall stripe.
15" White stel wheels with 6- hole stud holes each spaced 70mm apart on centre.
Centre wheel bore 110mm.

Patton Industrial Heat Exchanger

Skylarc Ref P109393

Patton Industrial Heat Exchanger.
Unable to decipher model from hand written ID label, see photos.
4x 325mm fan assemblies on one side.
Operational condition is unknown.

2x Reflex E40 Couplings & Parts

Skylarc Ref C109614

2x Reflex E40 Couplings & Parts.
Includes 3x soare elements plus the two E40 Couplings.

LiquidArc PlasmaJet PJ20 Plasma Cutter, Faulty

Skylarc Ref M109650

LiquidArc PlasmaJet PJ20 Plasma Cutter.
3-Phase.32A 4-pin plug.
Plasma leads are detached from unit for unknown reasons. Unknown if unit is serviceable.

Vintage 3/4" Drive Socket Set

Skylarc Ref S109656

Vintage 3/4" Drive Socket Set.
Unknown brand wrench.
Mixed brands of Imperial Sockets up to 2".
Worm and dented steel case.

3/8" Dessicant Dryer Air Line Filter

Skylarc Ref C109692

3/8" Dessicant Dryer Air Line Filter.
Air Command branded.
Model No.AC2085
Fits 3/8" BSP pipe size.
Unknown if used.

Vintage Motor Slide Rail Mounting Set

Skylarc Ref F109695

Vintage Motor Slide Rail Mounting Set.
Cast Iron construction.
600mm total lengths.
Compatible with motor feet up to approx 400mm in width.

Assorted Industrial Truck / Machine Tryes & Wheels

Skylarc Ref V109737

Assorted Industrial Truck / Machine Tryes & Wheels.
Includes:
4x Goodyear Multi-Rib size 9.00x10 tyres with steel wheels.
1x Firestone Transport size 8.25x16 tyre with no wheel.
1x Dunlop size 8.25x15 tyre with steel wheel.

Assorted Stainless Steel Bars, Shafts, Tubes, Bars

Skylarc Ref Y109792

Assorted Stainless Steel Bars, Shafts, Tubes.
2x flat Bars each 960x160x12mm.
13mm diameter rods.
44mm diameter, 1950mm long tubes.
See photos for further details on included items.

Stainless Steel Flexible Suction Line & Inline Strainer Filter

Skylarc Ref Z109793

100mm stainless steel flexible suction line included.
Inline strainer filter included.
Stainless steel hose is approximately 6 metres long.
Inline strainer has a filter basket of stainless steel mesh.
Filter basket has approximately 6mm square holes.
Flanged ends on both strainer and hose
Visible surface rust on flanges and exterior bolts.

Assorted Industrial Ekectrical Components, Boxes

Skylarc Ref H109801

Assorted Industrial Ekectrical Components, Boxes.
PVC plastic box with control light indicators 250x200x100mm.
ABB Sace S1 switch.
Allen Bradley 1606-XLS unit.

Assorted Stainless & Non-stainlees Steel Conveyor Rollers

Skylarc Ref D109303

Assorted Stainless & Non-stainlees Steel Conveyor Rollers.
All are 50mm diameter.
Lengths include 370mm, 490mm, 530mm, 680mm, 910mm, 940mm.
48x total rollers in auction.
Condition varies with each unit.

Assorted Roller Frames

Skylarc Ref Q109342

Assorted Roller Frames.
Frame lengths vary from approx 650mm to 2400mm.
White nylon rollers 40mm wide, 20mm diameter.
Red and yellow pvc plastic rollers in frames also included.
Approx 25x roller frames in auction.

Assorted Steel Rods & Brackets

Skylarc Ref M109364

Assorted Steel Rods & Brackets.
90-Degre rods are 16mm diameter, 450x295mm length.
Brackets are 25x5mm flat bars with 45mm centre saddle.
Auction includes all on 1100x580mm pallet.

Large Engine Exhaust Scilencer

Skylarc Ref N109365

Large Engine Exhaust Scilencer.
200mm pipe size.
Unknown manufacturer.

Steel Key Holder Cabinet

Skylarc Ref J109621

Steel Key Holder Cabinet.
Steel construction in white finish.
4x inner hinged panels that have 50x hooks per side for hanging keys or tags, etc. 400x hooks in total.
Outer door is lockable but, coincidently, the key for the outer door key cabinet is missing.
Dusty exterior, would benefit from a cleanup.

Bosch 18V Cordless 1/2" Drive Impact Driver w/ Battery & Charger

Skylarc Ref P109653

Bosch 18V Cordless 1/2" Drive Impact Driver w/ Battery & Charger.
Model No.GDS 18V-LIHT
Includes Bosch ProCore 18V 8.0Ah battery.
Includes battery charger GAL 1880 CV.
Impact Driver operates but shows heavy wear and usage.

Vintage Mobile Metal Drawer Cabinet

Skylarc Ref Z109715

Vintage Mobile Metal Drawer Cabinet.
Manufacturer and age unknown.
Metal construction with formidable covered top board.
Three all Metal drawers that move ok.
Mounted on original cadtors that are a bit stiff but still roll.
Sturdy old cabinet would make a great restoration project!

Vynco Stainless Steel Electrical Cabinet

Skylarc Ref G109800

Vynco Stainless Steel Electrical Cabinet.
250x200x150mm.
304 grade stainless.
Lockable, key is missing.

2x Industrial Formica Sheets, 1070x760x12mm Each

Skylarc Ref L109337

2x Industrial Formica Sheets.
1070x760x12mm Each.

10x Assorted Industrial Rubber Engine Mounts & Buffers

Skylarc Ref V109347

10x Assorted Industrial Rubber Engine Mounts & Buffers.
Most appear to be unused but rusty from storage.
Four varieties, see photos.

Assorted Grinding & Cutting Wheels & Disks

Skylarc Ref X109349

Assorted Grinding & Cutting Wheels & Disks.
2x garnet grinding wheels 150mm diameter, 80mm wide.
Various cut-off disks from 305mm to 355mm diameter.
Age of items is unknown.

5-Core Copper Flex Cable, 12-Metre Length

Skylarc Ref I109360

5-Core Copper Flex Cable.
12-Metre Length.
38mm diameter.

8x 150mm Diameter Trolley Wheels

Skylarc Ref F109357

8x 150mm Diameter Trolley Wheels.
40mm wheel width.
Mounting baes 130x100mm.
All are fixed mount design, no swivel included.
All are used but roll OK.
See our other listings for more used Trolley wheel lots.