SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Haulotte Optimum 8.1 Scissor Lift

Skylarc Ref F171461

Manufacturer Haulotte Group
Model Optimum 8.1
Serial number CE806878
Year of manufacture 2015
Unloaded mass 1572 kg
Nominal power 4.5 kW
Gradeability 25 percent
Rated load inside use 230 kg
Rated load outside use 120 kg
Maximum allowable manual force 400 N inside use and 200 N outside use
Maximum allowable wind speed 12.5 m/s
Maximum allowable chassis inclination 1.5 degrees
Logbook summary card attached
Control panel with emergency stop and operation switches
Powered by electric drive

Three Phase Turret Milling Machine

Skylarc Ref B173615

Model: X6325
Table dimensions: 254mm x 1270mm
Table travel 700mm
Cross travel 405mm
Knee travel 405mm
Spindle travel 127mm
3 feed rates .076mm, .038mm, .203mm
3hp main spindle motor
Sino distal read out
NT40 spindle taper
Spindle speeds 0 - 4200rpm
Power feeds
Manual
Three phase
Manufactured 2004.

To see this machine running:
https://youtu.be/G6HIHTIu9mI

Bridford Single Axle Winch Tipping Trailer

Skylarc Ref Q170328

Bridford Single Axle Winch Tipping Trailer.
Model No. 8x4 Winch.
Manufactured in 2017.
Tare 390kg
Gross 1000kg.
Tyre size 165x14.
Enclosed bin approx 2450x1310x810mm.
Rego expired 16/11/2025.
WOF expired 01/2023.

20-Foor Shipping Container Worksite Workshop/Smoko Room

Skylarc Ref M172066

20-Foor Shipping Container Worksite Workshop/Smoko Room.
The Container has been divided into two interior rooms.
The first room with the original Container doors is set up as a work room with stere topped wall Workbench plus a plywood Workbench at back. Light switch and singe phase plug on back wall. This room measurea approx 3450mm long.
Second room is set up ad a smoko/lunch room with built in table with benches, A cupboard with sink (no tap installed), and two electric heaters. A door had been cut into Container side, door measures approx 600mm wide. A window has been cut our of back wall, its glass is laying on the table.

Container shows moderate rusting, some possible ceiling leaks in workshop room. Container outer bottom framework is severely rusted and may need reinforcing/repair.

Biesse Akron Edge Bander

Skylarc Ref A172236

Manufacturer Biesse
Model Artech Akron 435
Year of construction 2010
Serial number 54233
Power supply voltage 415V AC
Rated current 20A
Number of power supply phases 3
Power 8.3kW
Frequency 50Hz
Control panel with touchscreen interface
Equipped with integrated material feeder
Multiple dust extraction ports installed
Made in Italy
Ex joinery shop closure

Kassow Robots RC02 Robot Arm w/ Controller

Skylarc Ref T170253

Kassow Robots robot arm, ID label worn so specific model is unknown. Arm is approx 1300mm in length.
Model RC02 robot controller.
Controller supply 100V-230V AC 16A.
Controller serial number 210604RC0004.
Kassow Robots teach pendant model TP02 included.
Teach pendant serial number 210607TP0001.
Robotiq grippers attached to robot arm.
Wiring harnesses and cables included.
Tool kit with assorted components and fasteners included.
CoBotics documentation manual included.
Includes heavy steel arm mounting column 635mm tall.
Controller box and pendant units powered on, see photos.
Formerly used to load a CNC lathe

Cosen Metal Cutting Band Saw

Skylarc Ref M171104

Model Cosen C-320NC
Manufactured 09/2000
Automatic bandsaw
Powered vice
3-phase 32A plug
Cuts material up to approximately 400mm wide
Drive motor 5 HP
400V operating voltage
MFG No. 891160
Control panel with digital keypad and pressure control
Cosen Machinery Industrial Co Ltd

Akira-Seiki Vertical Machining Center

Skylarc Ref C173616

Model: Akira-Seiki A-650 Vertical Machining Center
X-Axis travel 650mm
Y-Axis travel 350mm
Z-Axis travel 400mm
Spindle Nose to Table Surface 200-600mm
Pallet Size 650 x 350mm
Pallet Loading Capacity 120kg
Spindle speeds 12-12000rpm
Spindle Drive 5.5/7.5kW
HSK-63A spindle taper
8 x tool holders
24 tool carousel
Pair of matched vices
Fanuc Series Oi-MC CNC controller
Manufactured 2005
Was running when removed from work approx 6 months ago
You will need your own lifting equipment to load this machine

Industrial Roller Door Assembly w/ Entry door cutout

Skylarc Ref W170282

Industrial Roller Door Assembly.
Door width approx 3100mm. Door height is unknown.
Manual hand chain driven operation.
Has cutout for invluded personnel entry door frame with door, both steel. Door width 790mm, height 1990mm. Frame width approx 900mm, height 2100mm.
Some bending to Personnel Door frame. Some holes in visible roller Door sections, see photos.

FEEDDEX 61 Mixer with AEI Kapak Motor

Skylarc Ref O171886

FEEDDEX 61 mixer unit
Twin hopper feed system
Powered by AEI Kapak motor type D112M
Motor rated at 3 horsepower
Motor voltage 400V
Three phase motor
Motor speed 940 RPM
Continuous duty motor
Motor current 5.1 amps
Starter is Nilsen OJ15 direct on line type 3
Starter line voltage 400V and coil voltage 400V
Starter frequency 50 Hz
Starter range 12.6-18 amps
Starter horsepower rated for 10 HP
Fitted with IP66 32A 500V plug (PDL 56PA432)
Steel construction with support frame
Protective grid fitted in both feed hoppers
Electrical control box attached

Assorted Structural Steel Sections

Skylarc Ref J171491

Assorted steel sections included.
Various sizes and profiles visible in images.
Material shows surface rust.
Includes channels and box sections.

Mixed Steel Pipe and Box Section Offcuts

Skylarc Ref E171486

Steel offcuts including round pipe and square box section
Mixed sizes and lengths
Material include both rusted and galvanised steel

Motosaldatrice Engine Driven Welder on Trailer

Skylarc Ref C173668

Motosaldatrice MPM 12/400 I-KA engine driven welder mounted on Briford tandem axle trailer.
Welder type is MPM 12/400 I-KA.
Rated welding current 480A at 36V 35 percent duty cycle.
350A at 34V 60 percent duty cycle.
300A at 32V 100 percent duty cycle.
Welding voltage 30A to 72V.
Generator output 12 KVA 3 phase 415V or 10 KVA single phase 230V.
Control panel features multiple sockets and meters.
Engine is a Kubota model D1105-E diesel engine.
Runtime hours are 2678.23.
Does run but only if jump started from starter motor
Vendor reports the generator works but the welding doesn't

Trailer manufacturer is Briford Trailers.
Trailer model GRS TANDEM.
Year of manufacture 2000..
Trailer tare weight 300kg.
Trailer gross weight 1500kg.
Tyre size 165x13.
Aluminium checkerplate storage box fitted to trailer drawbar.
Chassis number is 00449975.
Trailer WOF expired 08/2025.
Rego good till 18/08/2026.

Single Phase Lathe

Skylarc Ref O170326

Model No.TY-1340BH.
Manufactured in 1989
1000mm between centres
36mm spindle bore
300mm swing over bed
500mm swing over gap
Thread cutting
Morse taper No 3 tailstock taper
200mm three jar chucks
200mm four jaw chuck
250mm faceplate
Fixed steady
Traveling steady
Some tooling

7.5kVA Generator Leyland Diesel Engine

Skylarc Ref T171111

Leyland Diesel Engine.
75kVA, 440VAC, 3-phase.
See photos for power output cable details.
Engine is a Leyland Engine type model UE 600/31, unit type model GU 600/12/5, manufacture year unknown.
Hour clock gauge states 422 run hours.
Includes blue canvas cover tarp.
Formerly standby generator for a local engineering company and was run up and tested regularly
You will need your own lifting machinery to load this machine

Ceccato CSA15 Air Compressor w/ OMI ED-15A Air Dryer

Skylarc Ref Y171168

Ceccato CSA15/8 G2 air compressor
Year of manufacture 2010
Weight 220 kg
Working pressure 8 bar.
Max pressure 8 bar.
Made in Italy.
Serial number CA1435828.
Product number 4152007007.
Voltage 400 V 50 Hz 3 phase.
Max inlet temperature 40 C.
Max ambient temperature 40 C.
Control panel ES 3000.
Recent service recorded at 7106 hours on 7/6/24.
Aldo includes OMI ED-15A air refrigerator dryer.
Max working pressure 16 bar.
Air flow 1869 litres per minute.
Refrigerant type R134a (0.38 kg).
Electrical power 0.41 kW.
Power supply 230 V 1 phase 50 Hz.
Max inlet temperature 55 C.
Max ambient temperature 45 C.
Serial number 08T-000481.
Tidy machine in running condition

Towable Wood Chipper with Vanguard Engine

Skylarc Ref A171612

Towable wood chipper on two wheels
Powered by a Briggs and Stratton Vanguard engine
Vanguard 12 engine visible on housing
Manual for Vanguard engine models 290000 300000 350000 380000 included
Viking 2000kg rated tow coupling
Painted green and yellow steel construction
In-feed hopper and discharge chute installed
Belt-driven mechanism visible between engine and chipper
Handwritten note on body states starts on ether carb, needs clean, hinges need freeing seized.
Hinges marked as seized in handwriting on hinge
Engine is air cooled and has a recoil starter and key

Mixed Steel Sections and Beams Lot

Skylarc Ref K171492

Lot consists of various steel sections and beams.
Includes rectangular hollow sections of different sizes.
Includes I-beam and angle steel sections.
Sections are visibly rusted on surface.
Multiple lengths and profiles

Welding Rotisserie Frame with Casters

Skylarc Ref D171641

Steel rotisserie frame with white painted finish.
Includes two upright posts with yellow end plates.
Each upright post has a caster base for mobility.
Yellow steel crossbar with flanged ends included.
Mounting flanges have multiple bolt holes for adjustment.
Frame sections connected with bolts and brackets.

Approx size 5400mm x 1600mm

Garrick Bench Drill Press and Drill Press Tapping Machine

Skylarc Ref P171757

Includes one Garrick Machine Tool bench drill press.
Includes one Drill Press and Tapping Machine.
Both machines are mounted to a single wooden workbench.
Both drill presses have electric power cords with plugs attached.
Garrick drill press features an emergency stop button and three-spoke hand wheel.
Tapping machine features three-spoke hand wheel and labelled control switches.
Each drill press is equipped with an adjustable work table.
Metal table surfaces show signs of use with cuts and marks.

Steel Workbench with Shelving and Record No 6 Vice

Skylarc Ref S171760

Steel frame workbench with plywood side and back panels
Top surface appears to be a laminated or coated board
Bench includes integrated shelf above worktop
Lower section has shelving and storage compartments
Equipped with a Record No 6 metalworking bench vice
Bench has rectangular storage cubicles under worktop
All structural components are either steel or plywood

OAV SW-1404 Woodworking Bandsaw

Skylarc Ref F171877

Model SW-1404
Motor rated at 3/4 horsepower
Single phase 230 volt power supply
50 Hz cycle
Manufactured by OAV Woodworking Machines
Made in Taiwan
Manufacture date August 1983
Serial number 390765
Fixed base with open cabinet storage
Steel table with slot and guide
Table marked WOOD CUTTING
Blade guide adjustment apparatus
Includes attached power cable with standard plug

SCA 12000kg Shop Press

Skylarc Ref E171876

Brand: SCA
Model: 12000KG Shop Press
Working load limit: 12000kg
Manual hydraulic operation
Includes two black press plates
Includes two-piece bearing separator
Quality assured
Made in China
Press platform has multiple adjustment holes for height
Red metal frame construction
Bottle jack mechanism included
Spring return system
Warning and operation label present on upper frame

Vintage 3-Phase Radial Arm Drill by Asouith

Skylarc Ref O171106

Vintage 3-Phase Radial Arm Drill by Asouith.
ID plate missing from drill so age, and model details unknown.
900mm drill arm length.
Adjustable height Drill table 770x510mm.
No.4 Morse tapered drill chuck with a No.4 to No.3 shank adapter attached.
3-Phase 16A plug.

Mobile Aluminium Scaffold Tower

Skylarc Ref C171536

Mobile scaffold tower constructed from aluminium tubing
Platform deck
Four swivel castor wheels with foot brakes
Cross-brace supports for stability
Rectangular work platform surface
Guardrails fitted above platform level

One wheel lock broken

Assorted Stainless Steel Pipe and Square Tube Lot

Skylarc Ref L171493

Assorted lot of stainless steel pipe and square tube.
Lot includes multiple round pipes of various diameters.
Lot includes several square tubes.
Material is bundled on a pallet with plastic strapping.
No additional fittings or accessories are included

Assorted Lots of Steel

Skylarc Ref F171487

Assorted lots of steel sections

68 Small Metal Plates

Skylarc Ref L171441

Lot of 68 metal plates
Each plate is approximately 460mm long
Each plate is approximately 190mm wide
Each plate is approximately 40mm thick
Each plate weighs roughly 21 kilograms
Plates have a rectangular shape with notched ends
Plates have visible surface rust

Edmunds Gauges Trendsetter II Amplifier w/ Stone Block

Skylarc Ref U171112

Edmunds Gauges Trendsetter II Column Amplifier w/ Stone Block Attachment.
Model number E8300
Serial number 0332904-000-4005
Digital readout with LED display
Controls include IN/MM selection, mode, reset, range, limits, hold, set, and enter
RS-232C and two IN/OUT ports labelled A and B
44 PSI inlet with filtration and regulator assembly
Instrument mounted on a 305x305x100mm granite base with three metal legs
Granite plate includes a center bushing or fixture
Protective wooden cover for granite surface included.
Shipping unavailable as granite block too heavy for our courier.

3-Phase Linisher / Sander by Optimum

Skylarc Ref Y171116

3-Phase Linisher / Sander by Optimum.
Model TGM-3
Made in Germany.in 12/2018.
145kg weight.
Brlt dimensions are 100x2000mm.
32A plug attached.
Includes 3x extra sets of belt rollers in varying diameters.
Includes attached material holding vice assembly, see photos.
Includes 10x spare unused sanding belts.
Includes user manual and oladtic toolbox with adjustment tools.
Overall very good condition showing generally mild usage and wear.
Note that locking ring on power plug is detached, see photos.

Vintage Remote Control P-51 Mustang Scale Model

Skylarc Ref E173670

Remote Control P-51 Mustang Scale Model Petrol Flyable Plane.
Lightweight plastic, balsa wood, and foam construction.
2.3-metre length, nearly 3-metre wingspan.
Super Tigre 3000s two cylinder glow engine
860mm diameter propeller.
Retractable landing gear.
See photos for visible electronics
Impressive vintage model ready for new life

Kaeser Airtower 19 Industrial Air Compressor

Skylarc Ref O170248

Model Airtower 19.
Part number 1.8837.2.
Serial number 1884.
Manufactured by Kaeser Kompressoren GmbH.
Year of production 2005.
Rated power 11 kW.
Rated motor speed 3000 rpm.
Maximum working pressure 10 bar.
Ambient temperature range plus 3 degrees. Celsius to plus 40 degrees Celsius.
Sigma Control panel installed.
Pressure gauge on front panel.
Fitted with Kaeser ZK02 component Sach-Nr 9.1354.1.
Second lower Label indicates internal model TU 26 part number 1.8014.2 serial number 8750.
Refrigerant type R134a.
Charge of refrigerant 0.710 kg.
Max pressure (refrigeration system) 18 bar.
Max pressure (air system) 16 bar.
Rated voltage 230V single phase 50 60Hz.
Rated current 5.0A.
Made in Germany

Lockformer Sheet Metal Roll Former

Skylarc Ref C171120

Lockformer Sheet Metal Roll Former.
20ga capacity.
3-phase 16A plug.

Alfra Rotabest Piccolo 32/50 WD Magnetic Drill

Skylarc Ref X110051

Model Alfra Rotabest Piccolo 32/50 WD
Made in Germany
Input power 1100 watt
Single phase 230 volt
Frequency 50-60 Hz
Rotational speed 450 rpm
Drill holder 19mm Weldon
Core drill diameter range 12-32 mm
Maximum cutting depth 50 mm
Magnet input power 28 watt
Magnet adhesion 8000 newton
Year of construction 2011
Includes user manual
Includes three detachable handles
Includes orange plastic carry case

Garrick Floor Standing Drill Press

Skylarc Ref N171755

Brand Garrick
Floor standing drill press
Motor power 1 horsepower
Motor voltage 240V single phase
Motor current 4.8A
Frequency 50Hz
Motor RPM 1400
Class B motor insulation
Equipped with multi-step pulley system
Fitted with a standard three-pin plug
On and off switch with emergency stop
Cast iron work table with slots
Chuck installed

Flat Deck Warehouse Trolley with Rubber Tyres

Skylarc Ref Y171766

Flat deck trolley with welded steel frame construction
Deck surface is made of plywood panels
Two fixed axles and two steerable wheels
Steering mechanism connected to front wheels with steel bar
End railings with vertical support bars on both sides
Suitable for manual handling of large or heavy items in warehouse environments

Large Heavy Duty Workbench

Skylarc Ref N170247

Large Heavy Duty Workbench.
50x50mm box steel frame.
MDF board surfaces.
Work surface 1000mm above floor.
360mm wide upper back shelf.
Note that one rear foot is missing, see photos.

3M Speedglas G5-01 Welding Helmet with Adflo PAPR Unit

Skylarc Ref A171820

3M Speedglas G5-01 welding helmet is included.
Adflo powered air purifying respirator unit is included.
Flexible hose is attached between helmet and Adflo unit.
Helmet has an adjustable headband.
3M branding is visible on the helmet shell.
Control dial is present on the helmet exterior.
Charging adapter is included.
Adflo unit has indicator lights for power and battery status.
Label inside helmet identifies model as G5-01.
Helmet conforms to 3M EN 175 B, 3M EN 166 B, 3M EN 12941 TH3, and 3M EN 14594 3B certifications.

600mm Lathe Chuck

Skylarc Ref L171831

Four jaw independent lathe chuck.
Approximate diameter is 600mm.
Chuck body is metal with machined concentric rings.
Equipped with four reversible jaws.
Multiple threaded holes in the face for mounting or accessories.
Yellow-brass adjuster nuts visible on face.
Circular lifting eye bolted into chuck body.
Surface oxidation visible on exterior surface.

Hypertherm PowerMax 1650 G3 Series PlasmaArc Cutting System

Skylarc Ref E171668

Hypertherm PowerMax 1650 G3 Series PlasmaArc Cutting System.
32A 3-phase plug.
Includes user manual with CC-ROM disk.

Pallet of Fastening Hardware, Bolts, Nuts, Washers, & More

Skylarc Ref G171696

Pallet of Fastening Hardware, Bolts, Nuts, Washers, & More.
A mix of Galvanized, zine coated, stainless, and other metal varieties. Thousands of units on pallet.
Most appear unused stock, some others show rusting so may he used.

Kemppi ProMIG 530 Welder w/ Pro4200 Evolution & ProCool 30

Skylarc Ref J173103

Kemppi ProMIG 530 welding machine.
Power supply requirement 500V 32A 3-phase plug.
Kemppi Pro4200 Evolution wire feeder attached.
Kemppi ProCool 30 cooler attached.
Control panel model MXE MLS.
Welding processes supported include MIG and MMA.
ProMIG 530 input voltage 50V DC.
Maximum output current 520A at 60 percent duty cycle.
Maximum output current 440A at 100 percent duty cycle.
ProCool 30 rated for U1 400V and 1.25kW.
Pro4200 serial number 1034717M.
ProMIG 530 serial number 1036939M.
Includes torch and cables.
Cable plug is PDL 56PA432 rated at 32A 500V 50Hz IP66.
Wire feeder compartment is shown open
Made in Finland.
These units are operational.

Kemppi Pro MIG 500 Welder & Pro 4000 Welding Units

Skylarc Ref R173605

Kemppi Pro MIG 500 welder unit
Kemppi Pro 4000 welding unit
Three phase unit
32A 4-pin plug attached
Plug rated IP66 32A 500V 50Hz
Origin Finland
Kemppi model PROMIG 500
Kemppi model PRO 4000
Cable and hoses included as shown
PROMIG 500 rated at 500A at 60 percent duty cycle and 390A at 100 percent duty cycle
PROMIG 500 output 0-18 m/min and 0-25 m/min
PRO 4000 rated 400A at 36V 60 percent duty cycle
PRO 4000 rated 310A at 29.5V 100 percent duty cycle
PRO 4000 input 400V three phase 50-60Hz 25A
Units on wheeled trolley as shown

Alfra Rotabest 40 RQ Magnetic Drill

Skylarc Ref U110048

Alfra Rotabest 40 RQ Magnetic Drill.
Single phase motor.
Power input 1200 Watt.
Rotational speed 250 or 450 rpm.
Rota-Quick holder system.
Core drill diameter range 12 to 40 mm.
Maximum cutting depth 50 mm.
Operating voltage 230 Volt.
Frequency 50-60 Hz.
Magnet power input 125 Watt.
Adhesion force 16000 Newton.
Manufacturer Alfred Raith GmbH.
Made in Germany.
Model number and rating information shown on identification label.

3M Versaflo M-307 Adflo Powered Air Purifying Respirator

Skylarc Ref Y171818

3M Versaflo M-307 headtop included.
M-307 part of the M-300 series.
3M Adflo powered air purifying respirator unit included.
Unit shows 3M Adflo branding on blower.
Flexible hose connects headtop to Adflo unit.
Battery indicator present on Adflo unit.
Power adapter/charger included.
New Zealand power plug on charger.
Harness and belt system included with Adflo unit.
Protective face shield integrated with headtop.

3M Versaflo M-307 Respirator with Adflo PAPR Unit

Skylarc Ref Z171819

3M Versaflo M-307 respiratory helmet included.
M-307 is part of the M-300 series.
Helmet meets EN 12941, EN 14594, EN 397 LD, and other standards as labeled.
Label date code is 04/2021.
The system includes 3M Adflo powered air purifying respirator unit.
Adflo unit includes battery with indicator display.
Flexible hose connects the Adflo unit to the helmet.
Charger for Li-Ion battery with AU/NZ plug supplied.
Charger input 100-240V AC 50-60Hz and output 12.8V 1.8A as labeled.
Head harness and waist belt included

Industrial Panel Suction Lifter Assembly

Skylarc Ref V170281

Industrial Panel Suction Lifter Assembly.
Unknown manufacturer.
2500mm length
Four 1000mm wide side bars with adjustsble suction cups. Cups 100mm diameter.
Single phase powered.
Operational condition unknown.

Petrol Stump Grinder by Loncin

Skylarc Ref B170313

Petrol Stump Grinder by Loncin.
Unknown model number.
Powered with a 420cc petrol engine.
350mm diameter tyres.
280mm diameter cutting blade.
Rusty surfaces.

Pair of 4500kg Capacity Aluninium Ramps by Rapid Ramps

Skylarc Ref R170329

Pair of 4500kg Capacity Aluninium Ramps by Rapid Ramps.
Both are Model No.150 330.
4500kg max capacity.
Lengths are 3270mm.
Max widths are 550mm.
Max vehicle tyre width capacity 450mm.

Pallet of Assorted Bolts, Nuts, Washers, & More

Skylarc Ref T171657

Pallet of Assorted Bolts, Nuts, Washers, & More.
Mostly galvanized varieties.
Thousands of units on pallet.
See photos for further detsils on included items.
Condition varies with each unit. Most appears unused, some others may be used.

Pallet of Assorted Bolts, Nuts, Washers, & More

Skylarc Ref W171660

Pallet of Assorted Bolts, Nuts, Washers, & More.
Mainly galvanized and zinc coated varieties.
Also includes Anchor Bolts, rolls of roller chain.
Thousands of units on pallet.
See photos for further detsils on included items.
Condition varies with each unit. Most appears unused, some others may be used.

CEA Digistar 250 Dual Pulsed Welder

Skylarc Ref Q173110

CEA Digistar 250 Dual Pulsed welder.
3- phase 20A 4-pin plug attached.
Attachments not included.
Vendor tells us this unit is functioning.

WIA Weldmatic Fabricator Welder w/ Wire Feeder

Skylarc Ref M173600

WIA Weldmatic Fabricator Welder w/ Wire Feeder.
Welder Type No CP33
Wire Feeder Type No W17.
3-phase 32A 4-pin plug.
Includes attached Cabling.
Vendor states this unit is operational.

Miller Auto Invision II Robot Power Source

Skylarc Ref W173610

Miller Auto Invision II Robot Power Source.
Pendant controller is missing.
Vendor states unit as operational though no power cord is installed at rear.

F-16 Radio Control Flyable Scale Model

Skylarc Ref D173669

F-16 Radio Control Flyable Scale Model.
1.9-metres long, 1.3-metres wide.
Lightweight plastic, balsa wood, and foam construction.
Includes installed glow engine, OS Max, unknown CC rating
Ducted fan unit
One external "Fuel tank" is detached.
Front foam nose cone is loosely taped on.
No remote

Assorted Pallet Racking Components

Skylarc Ref Q170276

Assorted Pallet Racking Components.
Includes:
- 3x galvanised steel vertical frames each 915x80x2060mm.
- 6x orange horizontal beams each 2740x40x80mm.
- 10x light orange horizontal beams each 2740x50x100mm.
32x shelf support cross bars.
7x 25mm thick MDF Shelving boards

MiniConveyor Portable Worksite Powered Conveyor by Access

Skylarc Ref J171101

MiniConveyor Portable Worksite Powered Conveyor by Access Construction Equipment.
See photos for included accesories.
Poower supply unit not included.

MiniConveyor Portable Worksite Powered Conveyor by Access

Skylarc Ref L171103

MiniConveyor Portable Worksite Powered Conveyor by Access Construction Equipment.
See photos for included accesories.
Poower supply unit not included.

Metabo Corded Reciprocating Saw PSE 1200

Skylarc Ref D110031

Metabo Corded Reciprocating Saw.
Model No. PSE 1200.
Includes some spare blades and plastic case.

Heavy Duty Mobile Table Workbench

Skylarc Ref M170246

Heavy Duty Mobile Table Workbench.
50x50mm box steel frame.
MDF top and lower boards.
100mm diameter castors for mobility.
Sturdy mobile unit.

Modular Metal Shelving System

Skylarc Ref C171770

Modular metal shelving system comprised of multiple sections.
Sections include vertical uprights and horizontal shelves.
Shelves are made of metal and finished in a light colour.
Each section contains three or four adjustable height shelves.
Flat pack metal shelves and fasteners included.
Components include frame posts and shelf panels.
Shelves and supports are bolted together with included fixings.
System designed for floor standing use.
Suitable for warehouse or workshop storage.
3 bays are 2700mm long
2 bays are 1800mm long
1 bays is 900mm long

CPS Pro-Set VP6D 2-Stage Vacuum Pump 240V

Skylarc Ref X171869

CPS Pro-Set 2-stage vacuum pump.
Model number VP6D.
Power source 240V AC 50Hz only.
Rated at 148 litres per minute.
Comes with standard NZ/AU 3-pin power plug.
Oil sight glass present for oil level inspection.
Equipped with handle for transport.
Label indicates equipment suitable for refrigeration applications.

MasterTig AC/DC Pulse Single Phase 2000 Welder

Skylarc Ref H170319

MasterTig AC/DC Pulse 2000 Welder.
Single Phase.
Casing measures approx 520x250x500mm.
Includes attached Cabling.
Note that grounding pin on plug is damaged and partualy missing, will need replacing before powering up, see photos.

UNImig 172 Single Phase Welder

Skylarc Ref I170320

UNImig 172 Single Phase Welder.
Casing measures approx 480x280x430mm.
Plug cord pulling loose at plug, see photo.

Pallet of Assorted Pipe Fittings and Metal Components

Skylarc Ref G171878

Pallet contains a variety of pipe fittings and metal components.
Includes various sizes and types of fittings such as elbows and tees.
Some fittings are threaded and some are welded.
Labels identify items including 25mm and 32mm galv assorted fittings.
Assortment includes metal flanges and bends.
Large stainless steel vessel or filter unit is included.

Stainless steel press filter sheets

Skylarc Ref H171879

Stainless steel press filter sheets
Stacked on a pallet
Each sheet has multiple perforations
Material is stainless steel
Sheets are wrapped in plastic film
Suitable for industrial filtration applications

Walker Mowers Model M36-42 Ride On Mower

Skylarc Ref M171884

Walker Mowers ride on mower.
Model number M36-42.
Designed and built by Walker Manufacturing Company Fort Collins Colorado USA.
Equipped with GHS grass handling system.
Forward speed control lever installed.
Throttle and choke control levers installed.
Ignition key included.
Black vinyl seat with molded design.
Yellow steel mowing deck with front caster wheels.
Rear grass collection box in white plastic.
Model plate located near operator seat.
Non runner, parts only

3-Phase Industrial Grinder by Lyttelton Engineering

Skylarc Ref N171105

3-Phase Industrial Grinder by Lyttelton Engineering.
Model No.G9
32A 4-,pin plug.
400mm diameter, 50mm wide grinding wheels installed.
Older well used unit.

Single Phase Drilling & Milling Machine by Handy-Age

Skylarc Ref N171183

Single Phase Drilling & Milling Machine by Handy-Age.
Made in Taiwan.
Motor is dated 1990.
Slotted mounting table is 510x160mm.
Morse Taper No.3 chuck.
Machine is mounted on an included 950mm high all steel stand with inner storage.

Dura Splitter Log Splitter with Honda GX200 Engine

Skylarc Ref V171607

Dura Splitter log splitter
Powered by Honda GX200 G.5 petrol engine
Engine features manual recoil start
Hydraulic system visible with hoses and fittings attached
Splitter mounted on a metal frame with wheels for mobility
Splitter head features yellow and green metal construction
Splitter has a steel work table integrated into the frame

Starts and runs however likely to require some adjustment of rise need fall.

John Deere 10 Trailer Cart

Skylarc Ref C171640

John Deere model 10 trailer cart
Green steel body
Black steel tow arm
Two black rubber wheels with yellow rims
Rust visible inside the tray and on the tailgate
Removable tailgate for unloading
Tow hitch at the front suitable for riding mower or small tractor
Approx 1800mm x 900mm tray

Rear tailgate loose and missing mount on tray.

Pallet of Assorted Bolts, Nuts, Washers, & More

Skylarc Ref U171658

Pallet of Assorted Bolts, Nuts, Washers, & More.
Mostly galvanized varieties as well as a few zinc coated types as well.
Thousands of units on pallet.
See photos for further detsils on included items.
Condition varies with each unit. Most appears unused, some others may be used.

Portable Automatic Gas Cutter HK-55

Skylarc Ref Z171663

Portable Automatic Gas Cutter.
Model No.HK-55
Unknown manufacturer.
Includes steel case 570x225x110mm.
Cutter and its accessories are as new unused. Case exterior shows some scratching and marks from storage.

Portable Automatic Gas Cutter HK-55

Skylarc Ref A171664

Portable Automatic Gas Cutter.
Model No.HK-55
Unknown manufacturer.
Includes steel case 570x225x110mm.
Cutter and its accessories show generally mild usage.
See photos for included accesories.

40+ Large Galvanised Turnbuckles

Skylarc Ref C171666

40+ Large Galvanised Turnbuckles.
Auction is for all 40+ units on pallet.
All are of the same size.
Threaded Rods 37mm diameter.
Body length 410mm, diameter 59mm.
Total length when fully closed 770mm.
Max weight load capacity is unknown.
Some units have D-shackles attached to one end.
Total count is an estimation.

MAXbor MB351L Magnetic Core Drill

Skylarc Ref T171527

Model MB351L.
230V 50-60Hz 1100W.
No load speed 300 or 450 RPM.
Core cutter capacity 35mm by 35mm (L).
Twist drill bit capacity 13mm by 140mm (L).
Includes MAXbor carry case.
Includes three handles.
Includes spanner and hex key.
Includes coolant bottle with tubing.
Includes user manual.
Power switch and separate magnet on/off controls

Steel Work Platform with Staircase and Safety Rails

Skylarc Ref I171516

Steel framed elevated work platform
Yellow mesh grating stairs and platform surface
Angled staircase with open grid steps
Stainless steel tubular handrails on both sides of the stairs
Safety rail surrounds on three sides of the platform
Bolt-down plates at the base of support legs
Support structure made from square and tubular steel
Platform height approx 2.2m high
Suitable for industrial or maintenance use

Supported by forklift in the photos and will require another leg or bolting to an existing structure to stand up.

Steel Workbench with Irwin Vice

Skylarc Ref I171490

Steel workbench with rectangular top.
Workbench includes a mounted Irwin metalworking vice.
Vice is attached to one end of the workbench.
Workbench frame and under-shelf are metal construction.
Workbench surface shows significant rust.
Single lower storage shelf spans the length of the bench.
Four round steel legs support the structure.
Workbench top features a cutout section near the vice.

Master 3 Ton Lever Block Hoist 1.5m

Skylarc Ref O171444

Master lever block hoist.
Rated capacity 3 ton.
Maximum lift height 1.5 metres.
Manual operation with lever handle.
Includes two large metal hooks with safety latches.
Heavy duty chain included.
Serial number 505108.

Cebora MIG Weld 251C Welder

Skylarc Ref I173102

Cebora MIG Weld 251C Welder.
32A 3-pin 250V plug attached.
Includes attached Welding Cables.
Vendor tells us this unit is functioning.

LiquidAtc EasyMIG 220 Welder

Skylarc Ref H173101

LiquidAtc EasyMIG 220 Welder.
Single phase 16A plug.
Includes attached Welding Cables.
Vendor states this unit is operational.

Cigweld TransMIG 400 Welder w/ TransMIG 4R Wire Feeder

Skylarc Ref Q173604

Cigweld TransMIG 400 Welder w/ TransMIG 4R Wire Feeder.
3-phase 20A 4-pin plug.
Includes attached hoses and cables.
Vendor states this unit is operational.

In-Vision Ace Pro Industrial Electronic Video Scope

Skylarc Ref S173658

In-Vision Ace Pro Industrial Electronic Video Scope.
Includes tool, 1x 4.4Hh Li-Ion Battery, charger, aluminium carry case.
2-metre scope camera cable with LED lighting at tip.
User controlled remote tip movement is functioning.
Battery charges but its usage history is unknown.
Camera operates and can show a clear imagery but sometimes shows visual faults on screen depending on movement of the cable, see photos for samples.
Battery charger is starting to show cable damage, see photo.

Alfra Rotabest 40 RQ Magnetic Base Drill

Skylarc Ref Q110044

Alfra Rotabest 40 RQ magnetic base drill
Model number 40 RQ
Serial number 40112846
Rated input power 1200 Watt
Rotational speed 250 or 450 rpm
Rota-Quick tool holder
Core drill diameter range 12 to 40 mm
Maximum cutting depth 50 mm
Rated voltage 230 Volt
Frequency 50-60 Hz
Year of construction 2011
Magnet input power 125 Watt
Magnet adhesion 16000 N
Manufactured by Alfred Raith GmbH
Made in Germany

Power-Mac V9445A Magnetic Drill

Skylarc Ref W110050

Power-Mac V9445A magnetic drill.
Drill capacity for steel is 45mm.
Rated voltage is 230V at 50Hz.
Rated input power is 1200W.
No-load speed is 0 to 350 revolutions per minute.
Magnet attraction force is 12000 Newtons.
Maximum travel is 180mm.
Front speed control dial present.
On and off switch located on side panel.
Fuse holder is accessible on the main control panel.
Handle for feed advancement included.
Base contains two large circular magnets.

Pair of Horizontal Steel Pressure Tanks

Skylarc Ref D171771

Two horizontal steel pressure tanks included
Tanks have welded end caps
Mounted on steel base supports
Each tank has multiple threaded pipe fittings
Manual valve and pipework attached to one tank

Steel Workbench with Timber Top and Shelf

Skylarc Ref E171772

Overall dimensions are 2030mm length by 900mm width by 1030mm height.
Steel frame construction with blue uprights and orange beams.
Fitted with a timber work surface on top.
Includes a lower timber shelf for storage.
Cross bracing on rear for added stability.
Bench has bolted footplates for floor mounting or stability.

Pallet Racking Assembly

Skylarc Ref R170251

Pallet Racking Assembly.
Includes:
- 2x vertical frames each 905x80x3005mm.
- 8x horizontal shelving beams each 2250x55x65mm.
- 2x horizontal top bracing beans.

Dirty surfaces. One Shelving beam is bent inwards, see last photo.

380mm Diameter Lathe Chuck

Skylarc Ref K171830

Lathe chuck with 380mm diameter
Markings indicate a maximum force of 71 kN
Maximum speed rating is 180 RPM
Maximum clamping force is 25 kN
Marked mass is 120 kg
Four jaw chuck configuration
Steel body construction
Threaded mounting holes

Edmunds Flatness Master .002 Step G-42286 SO-332904

Skylarc Ref M171832

Manufacturer is Edmunds Gages.
Flatness Master set.
Model number G-42286.
Step size is .002 inch.
Serial number SO-332904.
Includes two round metal gauges.
One gauge marked Edmunds G-42286 002 STEP 332904.
One gauge marked .0004 STEP G37K36-2.
Another side marked .001 STEP G37K36-2.
Supplied in a black plastic case with foam insert.
Case label displays all markings and specifications.
Made in Farmington, CT USA.

Set of 3 Lathe Tool Holders NSR-163C NJD and GHGR 25-5

Skylarc Ref F171851

Set of three lathe tool holders is included.
One tool holder is marked NSR-163C NJD.
One tool holder is marked GHGR 25-5.
Cutting inserts are installed on some holders.
One insert is marked 060.

Lathe Tool Holders Set of 3

Skylarc Ref G171852

Set includes three lathe tool holders.
One holder marked Kennametal M3J31-13D NJC.
All are straight shank type holders.
Each holder is fitted with an indexable carbide insert.
Tool blocks are made of solid metal.
Shows visible wear and surface rust on some tool holders.

UNC Thread Taps 1/2-13 and 5/16-10 Assortment

Skylarc Ref H171853

Seventeen 1/2-13 UNC thread taps
Seven 5/16-18 UNC thread taps
All taps have straight flutes
Sizes and threading are visibly marked on the taps
Material is high speed steel
Both sizes are Unified Coarse Thread (UNC)
Total quantity is twenty-four taps

Kennametal Lathe Tool Holders NSR-163D PCRNR-188C NJA MTENN-2020K-16W

Skylarc Ref L171857

Three lathe tool holders are included.
Brands: Kennametal.
Model numbers: NSR-163D, PCRNR-188C NJA, MTENN-2020K-16W.
NSR-163D is marked made in Brazil.
Kennametal logo present on each holder.
All holders are steel construction.
Clamping screws are present on all holders.
MTENN-2020K-16W shows original model marking
Carbide insert clamps are visible on tool holder tips.

Cheboygan HSS 8042 TR20 x 30 H7 Tap

Skylarc Ref P171861

Brand is Cheboygan
Model marking HSS 8042
Marked TR20 x 30 H7
Marking S018049 present
High speed steel construction
Long hand tap with straight flutes
Hex drive end
Plastic storage case included

TIF XP-1A Refrigerant Leak Detector

Skylarc Ref S171864

TIF XP-1A Refrigerant Leak Detector unit.
Includes TIF XP-1A main detector device.
Flexible sensing tip attached to unit.
Comes in black plastic carrying case.
Owner's manual included.
Comes with two TIFXP-2 replacement sensing tips in sealed bag.
Manual is in multiple languages.
Battery powered operation.
Control panel includes mute, reset, on, off, sensitivity, and battery test buttons.

Heavy Steel Platform

Skylarc Ref E170316

Heavy Steel Platform.
100x50mm box steel frame with 3mm stainless steel deck.
A 3-phase control box with extension leads is attached underneath.

Stainless Steel Dual Chamber Industrial Tank

Skylarc Ref L171883

Stainless steel dual chamber construction.
Two cylindrical vessels mounted side by side on a steel frame.
Each chamber equipped with input and output ports.
Manual lever-style clamps for chamber access.
Butterfly valve fitted to output on one chamber.
Electrical hazard warning on the center panel.
Chambers secured with quick release stainless steel latches.
Apparent use for mixing or processing industrial liquids or food products.

Milling Vice Unit

Skylarc Ref X171115

Milling Vice Unit.
Unknown manufacturer/model.
Mounting base 485x160mm.
160mm wide jaw mounts, jaw insert plates not included.
Opens to approx 200mm.
35mm diameter threaded rod.
Jaw movement crank is missing.

Vintage Toolbox w/ Tools

Skylarc Ref C171172

Vintage Toolbox w/ Tools.
Steel Toolbox filled with vintage handtools including Pliers, screwdrivers, sockets, torque wrench, Files, and much more, see photos.
Conditions vary with each item.

Single Phase Industrial Metal Cutting Bandsaw

Skylarc Ref M171182

Single Phase Industrial Metal Cutting Bandsaw.
Unknown manufacturer and model.
Motor dated 1992.
300mm wide cutting width.
Max material thickness 150mm.
Mounted on wheels for mobility.

25-Ton Capacity Bow Shackle w/ Digital Weight Scale Bolt & Display Unit

Skylarc Ref B171665

25-Ton Capacity Bow Shackle.
Shackle measures 290mm long.
Includes PT Ltd branded Digital Weight Scale Bolt assembly.
Includes Rinstrum R320 digital scale display unit. Can be powerd by either 4x AA batteries or AC power adapter cord. Note that the battery compartment shows battery acid damage.. The alternative AC power source cavle is missing, buyer will need to source a replacement AC adapter cord to power scale.

Trupro Metal Belt Grinder Sander BG1502

Skylarc Ref E171694

Trupro Metal Belt Grinder Sander.
Model No.BG1502.
Belt size 150x2000mm
Conta t wherl 200x150mm.
3-phase 32A plug.
Includes 4x spare as new Z40 grit belts.
Machine shows surface rusting, see photos.
Has been in storage for some time.

Nitchi EC-3M Electric Chain Hoist

Skylarc Ref K171518

Brand: Nitchi
Model: EC-3M
Type: Electric chain hoist
Duty rating: 30 min
Lift capacity: 2000 kg
Lift height: 6 m
Voltage: 400V
Phase: 3
Cycles: 50 Hz
Rated current: 2.7A
Motor output: 1.3 kW
Insulation class: B
Number of poles: 4
Control pendant with up and down buttons included
Made in Japan by Nitchi Co. Ltd

Piusi Cube 56 Diesel Transfer Pump with Hose and Nozzle

Skylarc Ref I171464

Piusi Cube 56 diesel transfer pump
Model Cube 56
Meter reads in litres
Brook Crompton Doncaster England AC Motor fitted
Motor type HPE594TF8412BM
Supply voltage 230V 50Hz
Maximum pressure 2.8 bar
Flow rate up to 56L per minute
Includes attached hose
Includes black fuel nozzle
Meter counter display present on pump

Nitchi 2000kg Electric Chain Hoist EC-3M

Skylarc Ref D172057

Nitchi 2000kg Electric Chain Hoist.
Model EC-3M.
6-metre Chain length
32A 3-phase plug.
3-ton capacity hook attached.
Very dirty from storage.
Operational condition is unknown.

WIA Weldmatic 180s Single Phase MIG Welder

Skylarc Ref N173601

WIA Weldmatic 180s Single Phase MIG Welder.
Type No.CP17
Wire Feeder Type No.W19.
Dingle phase 10A plug.
Older unit that vendor states is in operating condition.

Bosch Professional Corded 125mm Angle Grinder

Skylarc Ref E171174

Bosch Professional Corded 125mm Angle Grinder .
Model No.GWS 7-125.
Includes user manual and pladtic case
Disk changing tool snd side handle are missing.
Tool appears unused and disk guard interior is shows no grinding residue.

Metabo Corded Router

Skylarc Ref F110033

Metabo Corded Router.
Model No. Of E 1812.
Single phase.

Hytsu 2500kg Pallet Trolley

Skylarc Ref Q170250

Hytsu 2500kg Pallet Trolley.
60mm minimum height, 160mm max height.
1145mm fork length.
150mm fork width.
225mm gap between forks..
Very dirty surfaces but appears to function normally.

Richmond 2000kg Pallet Trolley Jack

Skylarc Ref O170274

Richmond 2000kg Pallet Trolley Jack.
1055mm fork length.
155mm fork width.
Gap between forks 220mm.
Fork height from 90mm to 150mm.
Very dirty surfaces but appears to function as it should.

Large 660L Mobile Storage Wheelie Bin

Skylarc Ref P170275

Large 660L Mobile Storage Wheelie Bin.
Green plastic construction.
200mm Diameter wheels.
Side pins for lifting and tipping.
Hole in bottom for drainage

Weldtech PROARC1600 140A Inverter ARC TIG Welder

Skylarc Ref P171809

Weldtech PROARC1600 inverter arc and TIG welder
140A output
IGBT technology
Front panel dial for amperage adjustment
Includes electrode holder lead
Includes earth clamp lead
Fitted with three pin plug
Carries strap attached to the welder body

Miller Maxstar 151 Constant Current DC Inverter Arc Welder

Skylarc Ref K170322

Miller Maxstar 151 Constant Current DC Inverter Arc Welder.
Single phase.
See photos for included Cabling.
Plug shows damage, see photo.

Single Phase Drill Press

Skylarc Ref L170323

Single Phase Drill Press.
Unknown manufacturer.
Model No.RDM-100F.
Single phase.
310mm diameter table.
16mm Keyed chuck, key is included.

GT Power Professionsl Generator GT6500

Skylarc Ref M170324

GT Power Professionsl Generator.
Model No. GT6500.
Max output 6500W
Rated output 5000W.
13hp petrol engine.
Electric start.
Generator will not start.
All tyres are flat.

Mobile Platform Ladder by Ullrich

Skylarc Ref P170327

Mobile Platform Ladder by Ullrich.
Model number unknown.
Platform height above floor approx 1970mm.
150kg max load.
Plastic wheels for mobility.
Aluminium construction.

5x Safety Hand Rails, Barriers

Skylarc Ref P171159

5x Safety Hand Rails, Barriers.
Nade from 35mm diameter steel pipe.
All are secured by floor bolting, Bolts not included.
Includes the following sizes:
- 2x 1600mm long, 925mm high gand rails, one affixed with a chain.
- 1x angled Hand Rails 1600mm long with an angled height from 560mm to 800mm.
- 1x handrail 1250mm long, 925mm high with steel signage board welded to top rail, board is 800mm wide, 1000mm tall. Total height 1925mm.
- 1x handrail 2000mm long, 925mm high with steel signage board welded to top rail, board is 800x1000mm. Total height 1925mm.

Heavy Duty Pipe Bending Assembly w/ Assorted Attachments

Skylarc Ref O171184

Heavy Duty Pipe Bending Assembly w/ Assorted Attachments.
Unknown manufacturer.
Includes a bin filled with varying diameter pipe bending wheels.
Max pipe bending capacity is approx 40mm diameter.

Benchtop Arbor Press

Skylarc Ref D171667

Benchtop Arbor Press.
Unknown manufacturer/model.
Base measures 375x150mm.
Frame height 310mm.
Total height with press rod 505mm.
140mm diameter rotating press base wirh four slot widths of 15mm, 20mm, 25mm, and 40mm.
Press rod is 30mm diameter.

ESAB OrigoTig 150 Welder

Skylarc Ref Y171532

ESAB OrigoTig 150 welding machine
Input power supply 230V 50/60Hz
Output current max 150A
Duty cycle 150A at 35 percent 140A at 60 percent 110A at 100 percent
Open circuit voltage 71 to 78V
IP23C rated
Includes electrode holder and cables
Control panel with digital display
Made in Sweden
Model number 405-416-0361
For TIG and MMA welding processes

CEA Rainbow 180 Inverter Welder

Skylarc Ref X171531

CEA Rainbow 180 inverter welder
Type Rainbow 180
Single phase 230V operation
Current range 5A to 180A
Uo = 88V
Maximum output current 180A at 27V
Input frequency 50 60Hz
Cooling AF
Duty cycle at 20 percent is 180A
Duty cycle at 60 percent is 130A
Duty cycle at 100 percent is 104A
IP23S rating
Includes electrode holder with cable
Includes earth clamp with cable
Made in Italy

Kemppi Minarc 150 AU VRD Welder

Skylarc Ref W171530

Kemppi Minarc 150 AU VRD model.
Made in Finland.
Input voltage 240V.
Rated input current 15A.
Single phase 50-60Hz operation.
VRD safe functionality present.
IP23S protection rating.
Output current range 10A to 150A.
Duty cycle 150A at 35 percent.
Duty cycle 100A at 100 percent.
Open circuit voltage 85-90V.
Electrode holder with yellow handle included.
Earth clamp included.
Supplied with attached power cable and 15amp plug.
Serial number 1780873A present on rating plate.
Compliance with IEC 60974-1 and IEC 60974-10.
Carrying strap attached to unit.

Crane Scale 3000kg

Skylarc Ref V171529

Maximum capacity is 3000kg
Digital display shows weight in kilograms and pounds
Zero and tare functions available
Hold and 2nd functions available
On off power switch located on front panel
Battery box with DC 9V input
Large metal hook for load attachment
Sturdy metal shackle for lifting
Plastic outer case is orange in colour
CE mark on front panel

Requires a 9v DC power cable to charge battery. - NOT INCLUDED

14x Assorted Steel Cable Lifting Slings

Skylarc Ref H172087

14x Assorted Steel Cable Lifting Slings.
All are made from 20mm diameter cable.
Cable steel grade unknown.
Lengths include:
- 3x 1-metre
- 2x 1.2-metre
- 1x 1.3-metre
- 2x 1.4-metre
- 4x 2.4-metre
- 2x 5.5-metre
- 1x bare 4.6-metre cable with no looped ends.

Hitachi 250kg Electric Chain Hoist

Skylarc Ref B172055

Hitachi 250kg Electric Chain Hoist.
3-metre Chain length.
6.3mm chain size.
3-phase 32A plug.
Very dirty from storage
Operational condition is unknown.

2x Schrader Bellows Parker Pneumatic Cylinders

Skylarc Ref L165534

2x Schrader Bellows Parker Pneumatic Cylinders.
Housings are both 240x112x112mm.
Shafts are 24mm diameter, 150mm length.
20mm diameter air line connection holes.

DN80 PN40 Flanged Globe Valve Handwheel Operated

Skylarc Ref X110207

DN80 marking on valve body
PN40 marking on valve body
Flanged ends with bolt holes
Handwheel operated mechanism
Blue coated metal construction
Top cover secured with bolts
Wheel is black plastic or metal
Gland area has two hex nuts visible
Body appears to be cast metal
Valve face has yellow plastic dust cover
Visible body marking: 1.0619
Visible body marking: 6173

Magnattack Model 180/SP100-E Magnet Separator

Skylarc Ref R109915

Magnattack Global magnet separator.
Model number 180/SP100-E.
Serial number 1605/11331-A.
Stainless steel construction.
Unit mounted on a metal base with upright support arm.
Horizontal in-line entry and exit ports.
Fitted with electrical cable and multi-pin connector.
Detached green earth wire visible at cable end.
Funnel inlet at top of separator.
No additional accessories included.

Eagle Automatic Pocket Welting Machine Brother LT2-B831-3

Skylarc Ref U110100

Automatic pocket welting machine.
Model LT2-B831-3.
Manufactured by Brother Industries Ltd.
Control panel labeled Eagle Industry Co. Ltd.
Sequence indicator panel with carriage feed controls and emergency stop.
Reducing counter and seam length adjustment on main control panel.
Thread trimmer and stacker toggle switches present.
Operation select dial for sewing, center knife, and corner knife functions.
Sewing head made in Japan by Brother Industries Ltd.
Electrical requirement 20A 500V as per attached plug.
Machine table includes integrated controller units.
Input and output panel with power switch and connection ports.
Mounted on a steel frame with cabinet and foot pedal.

Veit 4430-2 Absaugbügeltisch Ironing Table

Skylarc Ref V110101

Manufacturer: Veit KG Bekleidungstechnik
Model: 4430-2 Absaugbügeltisch
Serial number: 01891
Year of manufacture: 1981
Voltage: 220V
Frequency: 50Hz
Rated power: 0.28kW
Current: 1.27A
Weight: 50kg
Equipped with Veit 7905 component
Fitted with brown padded ironing surface
Includes integrated suction platform
Plug type and power cable shown in images
Physical switch and indicator lamp on front panel
Control lever located on the front side
Heating power specification not marked on label
Manufacturer location: Landsberg-Lech, Germany
Warranty card in German language included

Juki MO-2516N Industrial Overlocker Sewing Machine

Skylarc Ref I110114

Juki MO-2516N industrial overlocker sewing machine
MO 2500 series
Class FF6-500
Made in Japan
Includes metal workstation table
Thread stand with four positions
Integrated lamp attached to workstation
New Zealand 3-pin power plug
Foot pedal included
Operator controls and adjustment knobs visible on machine
Label shows serial number 1074
Power cord shown in included images

Shirt Folder Machine

Skylarc Ref U110126

Shirt folder machine designed for use in garment processing.
Integrated metal frame with textile-covered work surface.
Unit includes control switches and adjustment levers mounted underneath the table.
Lower shelf provides additional storage.
Electrical input features a three prong plug and attached power cable.
Main control panel and mechanism located beneath work surface opening.
Includes pneumatic connection with attached red air hose.
Used condition indicated.

Brother LT2-B831-3 Automatic Pocket Welting Machine

Skylarc Ref K110142

Brother Industries LTD LT2-B831-3 sewing head
Made in Japan
Automatic pocket welting machine
Control panel includes seam length adjustment and sequence indicator
Operation select options labeled sewing, center knife, and corner knife
Thread trimmer and stacker switches
Emergency stop and reset buttons
Includes three spool thread holders
Foot pedal operated mechanism
Mounted on integrated workstation table
Power and carriage feed forward backward switches on control panel
Manufactured by Eagle Industry Co Ltd

Steel Workbench with Bins and Record No. 6 Vice

Skylarc Ref K171752

Steel workbench with solid metal frame
Fitted wooden boards on top
Raised shelf supported by three metal uprights
Four metal storage bins below main surface
Lower shelf runs the length of the bench
Record No. 6 bench vice mounted at one end
Side panel features outline tool storage markings

Steel Frame Workshop Shelving Unit

Skylarc Ref L171753

Steel frame shelving unit with four shelves.
Shelves are made of MDF Boards and supported by rectangular steel tubing.
Back panel is constructed from plywood.
Back panel has tool outlines and size markings for spanners.
Hooks attached to top frame for hanging items.

OKS Otto Klein 250L Pressure Vessel Tank

Skylarc Ref M171754

Manufacturer OKS Otto Klein GmbH
Model 04-202-033
Material number 3.5588.3
Serial number 3222
Capacity 250 litres
Maximum working pressure 11 bar
Minimum working temperature minus 10 degrees Celsius
Maximum working temperature 80 degrees Celsius
Year of construction 2004
Fitted with multiple ports and fittings
CE 0044 certification mark present

Steel Mesh Stillage Cage

Skylarc Ref Q171758

Steel mesh stillage cage.
Rectangular shape with mesh sides and solid steel top rails.
Bottom platform is fitted with a wooden sheet insert.
Base is designed for forklift handling.
Painted in dark red.

Metal Parts Drawer Cabinets 2 Units

Skylarc Ref R171759

Two metal drawer cabinets.
Each cabinet contains 15 drawers.
Total of 30 drawers.
Each drawer has a metal pull handle.
Each drawer measures 300mm x 400mm x 1320mm

Workbench with Upright Tool Holders

Skylarc Ref T171761

Workbench with rectangular frame construction
Wooden top work surface
Lower wooden shelf for additional storage
Upright frame mounted on rear of bench
Steel tubes designed for holding cylindrical tools or objects
Welded steel frame and supports
All structural components appear to be constructed from steel

Steel Two Shelf Workshop Trolley on Castors

Skylarc Ref U171762

Steel construction.
Two shelf design.
Raised sides on both shelves.
Fixed tubular steel handle.
Mounted on four castor wheels.
Worn paint finish with visible surface rust.

Steel Tipping Bin on Castors

Skylarc Ref V171763

Steel tipping bin construction
Square tapered bin with reinforced edges
Mounted on four castor wheels
Integrated push handle
Bin mounted on steel base platform
Drainage point at base of bin
bin is 700mm x 560mm x 490mm

Heavy Duty Steel Bin Cart on Wheels

Skylarc Ref W171764

Heavy duty steel bin cart.
Constructed from metal sheet panels.
Fitted with a rectangular tub body at 930mm x 630mm x 430mm
Metal handle attached for pushing or pulling.
Mounted on four wheels for mobility.
Flat wooden sheet fitted inside the base.

Metal Storage Cabinet with Shelves

Skylarc Ref Z171767

Metal storage cabinet with double doors
Cabinet stands on metal legs
Four internal shelves
Internal structure is reinforced with steel framing
Shelves and interior made of pressed board material
Back panel is pressed board material

20 Pallet Racking Mesh Shelves

Skylarc Ref B171769

Lot includes 20 pallet racking mesh shelves
Suitable for pallet racking systems

Galvanised Steel Storage Rack Frame

Skylarc Ref F171773

Galvanised steel construction.
Rectangular base with slatted bottom supports.
Vertical side supports connected at top by horizontal bars.
Open front and rear design.
Four ground contact points with flat plate feet.

Steel Wire Mesh Pallet Rack Shelves

Skylarc Ref G171774

Stack of steel wire mesh pallet rack shelves shown.
Material appears to be galvanized steel wire.
Each shelf has two metal reinforcement bars per panel.

Stack of Wire Mesh Panels

Skylarc Ref H171775

Stack of wire Mesh Panels

Wire Mesh Pallet Racking Shelves

Skylarc Ref I171776

Wire Mesh Pallet Racking Shelves

Compressed Air Blow Gun Assortment

Skylarc Ref J171777

Assortment of 8 compressed air blow guns included.
Various styles and nozzle types.
Brands visible include Air Boy, Walmec, and AmPro.
All have quick connect air fittings.
Some units have extended metal nozzles

Philips BVP151 LED Floodlight 50W 220-240V

Skylarc Ref L171779

Philips BVP151 LED Floodlight
Model: BVP151 LED50/NW
Power rating 50W
Voltage rating 220-240V AC
Frequency 50/60 Hz
Input current 0.22A
LED array 100 x 0.45W LED
Ingress protection rating IP65
Colour temperature 5600 Kelvin
Power factor 0.9
Ambient temperature specification t:25°C
Multiple units included
Cable ends are unterminated
Made in China

Air Tools Lot Impact Wrenches Ratchet Grinders Cutoff Tool

Skylarc Ref M171780

Lot of seven air tools included.
Three Snap-on brand air impact wrenches.
One air powered ratchet tool.
Two air die grinders.
One air cutoff tool with guard.
All tools have quick connect air fittings attached.

Coiled Air Hoses with Fittings and Accessories

Skylarc Ref N171781

Lot includes four coiled air hoses in yellow, blue, and green.
Each hose is equipped with varying air fittings.
One yellow hose is fitted with a black plastic air blow gun.
A separate green hose is fitted with a combination of metal and blue fittings.
A blue coiled hose has brass quick release fittings.
Accessories include a 1 inch Maxflo HC-210 lever handle valve.
Additional accessory includes a blue anodized aluminum T-valve with plastic adjustment knob and quick connect coupler.

Metal Tool Drawer Cabinet with Contents

Skylarc Ref O171782

Metal tool storage cabinet with four rows of drawers.
Blue painted exterior.
Twenty clear plastic drawers in total.
Each drawer is labeled for various cutting and machining tools.
Included labels: 8mm drill yoke, 10mm short drill, 10mm long drill, 16mm end mill, 25mm plunge cutter, 6mm drill couplings, 7mm drill rocker arm, 50mm face mill, taps, endmills.
Some drawers contain assorted drill bits, end mills, inserts, and accessories as photographed.
Various drill bits and inserts included in drawers.
Some packaging from Sandvik and Iscar SumoCham visible in drawers.
Drawer for taps contains mixed contents including hand tools and cutting tools.
Cabinet features mounting holes on the back panel.

Assorted Hand Tools with Two Red Toolboxes

Skylarc Ref P171783

Includes two red metal toolboxes
Assorted screwdrivers
Assorted files with plastic and rubber handles are included
A variety of pliers and combination pliers
A set of socket wrenches and ratchet handles is included
Several spanners and adjustable wrenches are present
Cutting tools such as tin snips and utility cutters included

Kawasaki Tools KPT-74B 3/8" Drill

Skylarc Ref S171786

Kawasaki Tools air drill
Model KPT-74B
3/8 inch drill capacity
Made in Japan
Includes chuck key in plastic bag
Instruction and parts manual included
Knurled metal chuck with T-handle tightening
Throttle lever on handle
Original box included
Kawasaki Machinery Co Ltd manufacturer

ER40 Collet Chuck Set 23 Piece Metric

Skylarc Ref V171789

ER40 collet chuck set
Shank size ER40
23 pieces included
Metric sizes
Collets are individually slotted
Some collets are wrapped in plastic
Supplied in fitted carrying case
Made in Taiwan

ER40 Collets Set

Skylarc Ref I171802

ER40 collets set in plastic case
Set contains 15 ER40 collets
Tapered tool holder included
Collets and holders are shown in a fitted plastic case
Collets are slotted for compression
Suitable for use with compatible milling or machining equipment

Assorted End Mills, Drills, & More

Skylarc Ref G170266

Assorted End Mills, Drills, & More.
Sizes from 3.5mm to 20mm.
See photos for details on types of end mills included.
Condition varies greatly with each unit. Some are as new while others show widely varying levels of use.

Assorted Milling and Tapping Tool Holders Collection

Skylarc Ref O171808

Lot includes various milling and tapping tool holders.
One tool holder is marked with WALTER F4042B 063 Z05 for milling applications.
Includes a N02 Reversible Tapping Chuck with 1/8 inch to 1/2 inch capacity.
Tapping chuck is No 2 Morse Taper and manufactured by Piper Tools Australia.
One tool holder is fitted with a standard keyed drill chuck.
A tool holder for threading die is included.
One precision boring head is present with dial adjustment visible..

HPM Plug Boss 6 Outlet Powerboard with 3.1m Lead

Skylarc Ref R171811

Brand: HPM
Model: Plug Boss 6 outlet powerboard
Each board has 6 power outlets
3.1m heavy duty lead
Surge protected 700 joules
Safety overload protection
Durable rubber ends and cord management with wrapping channels
Heavy duty hanger
Parking clip keeps cord in place
Plug pack transformer spacing
Maximum total loading 10A 2400W

Mixed Lot of Drill Bits and Workshop Tools

Skylarc Ref S171812

Lot includes various drill bits of assorted sizes and types.
Multiple taps and reamers are present.
Assorted end mills included.

Xcel-Arc Toxic Automatic Welding Helmet

Skylarc Ref W171816

Xcel-Arc Toxic automatic welding helmet
Model features 2 arc sensors
EliteVision technology included
Shade control range from 9 to 13
Grind mode adjustment on the side dial
Auto darkening filter module model XA5011FQ
Headgear included in packaging
Instruction manual and recommended shade settings included
Biohazard styled design in black and green
Comes in original packaging

Lincoln Electric Viking 3350 Welding Helmet and Bolle Face Shield

Skylarc Ref X171817

Lincoln Electric Viking 4C 3350 welding helmet included.
Welding helmet features lens technology.
Helmet has adjustable delay time, sensitivity, and shade controls.
Inside label provides shade guide settings for various types of welding and cutting operations.
Replacement parts for the Viking 3350 series are listed inside the helmet.
Helmet uses a replaceable lithium battery.
Bolle face shield included.
Bolle shield model complies with EN166 3 8 9 AT and AS/NZS 1337.1 standards.
Bolle shield features a clear visor with black plastic headpiece.
Both items designed for head and face protection during industrial applications.

Assorted Palket Racking Components

Skylarc Ref S170278

Assorted Palket Racking Components.
Includes:
- 4x vertical frames each 670x80x1830mm.
- 16x orange horizontal beams each 2440x55x90mm.
- 8x 25mm thick MDF Shelving boards.

All items are very dirty and oily with moderate rust spotting on vertical frames.

Pneumatic Fittings and Tubing Lot MAC ZS-018-0300 Cylinder

Skylarc Ref E171824

Includes a MAC ZS-018-0300 cylinder from Mac Valves Pacific Inc.
Contains a bin with various pneumatic fittings and components.
Multiple straight and elbow push-to-connect tube fittings visible.
Includes a large quantity of blue pneumatic tubing in multiple coils.
Contains white knit work gloves with red trim.
Includes various pneumatic valve bodies and small hardware items.
Black plastic storage bin provided with the lot.
Some components are in plastic bags inside the bin.
Tube rolls and fittings

PDL Industrial Switchgear and Power Distribution Parts Lot

Skylarc Ref F171825

Lot includes multiple PDL 32A 500V three phase IP66 industrial sockets and switches.
Includes enclosure with rotary selector switch labeled for night mode and auto power off.
Various three phase power outlets and isolators present.
Selection of orange industrial isolator switches included.
Lot contains loose electrical fittings and wires.
Includes two orange industrial connectors with transparent housings.
Some parts show wiring and internal modules.
Lot supplied in plastic container.
Brands visible: PDL.
Components are industrial electrical parts.
Cat numbers listed include 56 50 431 and 56 50 432.

Assorted Extension Leads and Power Cables

Skylarc Ref G171826

Lot includes multiple orange and black extension leads.
Some cables have three-pin power plugs.
Some leads have round industrial plugs with orange outer covers.
Mixture of standard three-pin and heavy-duty industrial plug types.
Cables vary in length.
Some leads have exposed internal wires visible at ends.
Assorted plug types include clear and orange screw caps and standard transparent plugs.

3 Metre Long Roll

Skylarc Ref I171828

One roll of material approximately 3 metres in length
White textured surface
Material appears to be flexible and fabric reinforced
Secured with black strapping tape
Ends show signs of prior handling
Core is a rolled tube structure

2x Iscar Indexable Lathe Grooving Tools, as new

Skylarc Ref K170296

Iscar Indexable Lathe Grooving Tools.
Includes:
1x GHGR 25-3.
1x GHGL 25-3
Both 135mm length.
Both As new with cases.

Sandvik Coromant R136.9-50-16 Tool Holder

Skylarc Ref I171854

Sandvik Coromant tool holder.
Model R136.9-50-16.
Markings include CCW-RH-FORWARD and T606 WHEELER-M 11172.
Body is cylindrical with flat section machined along the length.
Hardened steel construction.
Through-hole present at one end of the holder.
Slot and set screw on one side.
Markings are clearly stamped into the steel body.
Measures approximately 333mm long

470-150 400M Bar Holder

Skylarc Ref J171855

Marking on tool shows 470-150 400M.
Metal bar holder with squared sides.
One end has a hole and a pin assembly.

Botek and Sandvik Coromant Gun Drills Lot

Skylarc Ref M171858

Lot of 8 gun drills.
Includes Botek and Sandvik Coromant brands.
Botek drill marked with diameter 12.013mm length 180mm K15 18/00.
Botek drill marked with diameter 9.538mm length 180mm K15 18/00.
Sandvik Coromant drill marked 6.013 S16 4-90.
Drill marked 428.9-06013-010-201 S16 013-87.
Some drills have plastic blade protectors.
Steel shanks visible on all drills.
Various identifying numbers present on each tool.
All are straight-shank deep drilling type tools.
See photos for specific markings and sizes.

Sandvik Coromant and Botek Indexable Reamers Assorted Lot

Skylarc Ref O171860

Lot includes multiple indexable reamers.
Brands present: Sandvik Coromant and Botek.
One reamer marked Botek ø 6.013 x 180 K15 18/00.
Some Sandvik Coromant reamers marked K15 with various sizes and codes.
Example markings include Sandvik Coromant K15 23/10 428.9-15888-0180-205 and 428.9-09538-0180-103 K15 45/04.
Diameter markings on some reamers include 15.013 mm and 14.013 mm.
Length and lot codes present on some tools.
Most reamers have protective end caps.

Signet 9mm Inspection Camera QC-8710 with Colour LCD Monitor

Skylarc Ref R171863

Signet 9mm Inspection Camera model QC-8710
Includes colour LCD monitor
Case included
5mm waterproof LED lens
2.5 inch TFT-LCD monitor
Flexible tube
Includes hook mirror magnet and rubber ring accessories
LED brightness control
Power indicator and low voltage indicator
Power on off button
LCD contrast control
Handle with onboard controls
User manual included

R134a Manifold Gauge Set with Charging Hoses and Case

Skylarc Ref T171865

R134a manifold gauge set included.
Two pressure gauges present.
One blue low-pressure gauge and one red high-pressure gauge.
Three charging hoses included.
Hoses are color coded yellow red and blue.
Hoses marked R-134a Charging Hose.
Red plastic carry case included.
Manifold features control knobs and brass fittings.
Case has molded slots for storage.

4 Inch Belt and 6 Inch Disc Sander

Skylarc Ref U171866

4 inch belt and 6 inch disc sander
Voltage 240V 50Hz
Power 350W
Belt size 100x915mm
Disc size 150mm diameter
Belt operates in horizontal and vertical positions
On off switch located at the front of the unit
Metal work tables for belt and disc sanding
Angle adjustable support with handle on disc sander table
Dust extraction port at rear

Ozito Angle Grinder 100mm AGS-4050

Skylarc Ref W171868

Ozito Angle Grinder model AGS-4050
100mm cutting diameter
850W motor
No load speed 12000rpm
M10 spindle
Weight 2.05kg
Includes metal gear box
2 position side handle
Includes spindle lock
Alloy gearcase
Includes 100mm metal grinding disc
Includes safety guard
Includes side handle
Includes inner and outer flange
Includes pin spanner
Includes instruction manual

R406A Refrigerant Cylinder 25lb 11.3kg

Skylarc Ref Y171870

R406A refrigerant cylinder
Net weight 25lb 11.3kg
Non-flammable liquified gas
Contains chlorodifluoromethane CAS 75-45-6
Contains chlorodifluoroethane CAS 75-68-3
Contains isobutane CAS 75-28-5
For professional use only
Non-refillable disposable cylinder
To operate connect charging hose to valve
S.P./T.P.: 2.1/2.7MPa
Container feels Full

TG950 Generator

Skylarc Ref Z171871

Model TG950 generator
AC output 50Hz
Rated output 650VA
Voltage 220V or 240V
Single phase
Fuel type mixed gasoline
Fuel tank capacity 4 litres
Manual pull start
One AC output socket
Engine on off switch
Ratio for mixing fuel indicated as 50 to 1 on tank label
Handle on top for carrying

Super Works 1200W Generator

Skylarc Ref A171872

Super Works portable generator
Rated output: 1200W
4 stroke engine
Model and displacement not specified
Panel includes engine switch, voltmeter, DC socket, circuit breaker 240V, and AC socket
OHV engine type visible
Fuel tank with metal cap
Protective steel tube frame

Ozito CSW-7000 185mm Circular Saw

Skylarc Ref B171873

Ozito CSW-7000 185mm circular saw
1200W motor
230-240V 50Hz power supply
No load speed 4800 rpm
Blade diameter 185mm
Arbor size 16mm
Maximum cut depth 65mm
Includes Irwin 184mm 20T saw blade
Includes angle guide attachment
Includes adjustable fence guide

ESAB OrigoTig Single Phase Welder

Skylarc Ref J170321

ESAB OrigoTig Single Phase Welder.
Casing measures approx 345x170x300mm.
Includes attached Cabling.
Power cord has been pulled loose from casing exposing inner wires, see photis.

Assorted Stainless Steel Covers and Components

Skylarc Ref D171875

Assorted stainless steel covers and components.
Various shapes and sizes included in lot.
Components made from stainless steel material.
Some items feature mounting brackets and fasteners.
One enclosure includes electrical wire and cable entry point.

Skope Upright Display Freezer

Skylarc Ref K171908

Model VF650X LT65GY
Unit model UF40ACD
Supply voltage 220-240V AC 50Hz
Rated current 7.5A for cabinet
Rated current 5.3A for unit
Defrost current 3.7A for cabinet
Defrost current 3.6A for unit
Trace heat input 193W
Refrigerant R404A
Refrigerant charge 700g
Year of manufacture 2019
Manufactured by Skope Industries Limited
Manufactured in New Zealand
Climatic class 5
Insulation blowing agent Cyclo-Isopentane
Serial numbers A190211150 and U190210625
Three adjustable wire shelves inside
Glass front door
Digital temperature display and control

Missing front cover

Pressure Vessel Air and Gas Industries

Skylarc Ref K171882

Pressure vessel with cylindrical body and dome ends.
Registered number 86329 Queensland.
Certified pressure rating 690.
Date of manufacture appears to be 1 11 79.
Last inspection sticker reads January 1995 by Air and Gas Industries Wacol Brisbane QLD.
Includes fitted piping and valves as shown.
Mounted on four steel legs.
Top access flange with multiple bolts.
Includes mounted actuator and yellow control enclosure on top section.

Walker MFG Company Mower Deck

Skylarc Ref N171885

Manufactured by Walker MFG Company.
Serial number D-734336.
Made in Fort Collins, Colorado, USA.
Yellow metal mower deck.
Plastic grass chute attached.
Three wheels mounted for mobility.
Multiple adjustment levers present.
Label includes identifier 5858.

Vintage Heavy Duty Hydraulic Trolley Jack

Skylarc Ref D171173

Vintage Heavy Duty Hydraulic Trolley Jack.
Unknown manufacturer, model, and age.
Lifting capacity unknown.
165x165mm lifting pad.
Jacking height from approx 135mm to approx 580mm.
Hydraulics are functional but not tested under load.

Engine "Art" Sculpture

Skylarc Ref A171196

Engine "Art" Sculpture.
Assembled with unknown brand/model of cleaned and restored 4-cylinder engine components
Mounted onto two stained wood boards.

Cigweld Electrode Drying Oven

Skylarc Ref Y171610

Cigweld brand electrode drying oven
Blue metal exterior enclosure
Four internal metal shelving trays
Front door with external latch and handle
Temperature control dial with range from 0 to 300°C
Power indicator light on front panel
Internal heating element visible at rear
Some welding electrodes currently present inside

FFM TourPro II Motorcycle Helmet, Size XL

Skylarc Ref Y171636

FFM TourPro II Motorcycle Helmet.
Size XL.
Model No.FF311
Includes soft pouch bag.
Helmet shows very little signs of use.

Galvanised Steel Frame Table with Adjustable Feet

Skylarc Ref X171609

Galvanised steel construction
Rectangular frame with crossbars for support
Fitted with four legs
Each leg fitted with adjustable threaded foot
Open frame design without top panel
Welded joints throughout structure
Approximate height set by leg adjustment

SIDI Vertigo Motorcycle Boots, Size 9 UK

Skylarc Ref Z171637

SIDI Vertigo Motorcycle Boots..
Size 9UK, 9.5 US, 43 EU, 27 JP.
300mm boot height.
Boots are very clean and show very light signs of use.

Milwaukee MS 305 DB 305mm Compound Mitre Saw

Skylarc Ref P171601

Milwaukee MS 305 DB compound mitre saw.
305mm blade diameter.
Rated power 1800W.
240V supply.
50Hz frequency.
No-load speed 3200 min-1.
LCD display panel integrated.
Adjustable mitre angle base with scale.
Dust extraction port at rear.
Material clamp included on base.
Transparent blade guard installed.
Red laser guide feature visible on base.
Model and serial badge present on body.
Milwaukee Electric Tool Corp manufacturer.

Hitachi G 18MR 180mm Disc Grinder

Skylarc Ref J171543

Model G 18MR.
180mm disc grinder.
230V 50Hz 10A.
2400W power rating.
8500 revolutions per minute.
Includes side handle.
Includes disc guard.
Includes 180mm grinding disc installed.
Includes wrench.
Includes flange set.
Includes operating instructions manual.
Brand is Hitachi Koki.
Made in Malaysia.

Never been used. Was taken out of original box and assembled for the photos.

Paslode Impulse FrameMaster 30 Degree Framing Nailer

Skylarc Ref F171539

Paslode Impulse FrameMaster 30 Degree Framing Nailer
Model B20540
Compatible with nails diameter 2.8mm to 3.4mm
Compatible with nails length 50mm to 90mm
Smooth and ring nail compatibility as per label
Includes Paslode battery
Includes Paslode battery charger
Includes power adapter for charger
Includes plastic Paslode carry case
Includes a canister of Paslode tool oil
One fuel cell is present
30 degree angle magazine
Manufacturer: Paslode, an ITW company, Vernon Hills, IL, USA

6x Bow Shackles, 8.5-ton Capacity

Skylarc Ref H171697

6x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter blue painted pins.
6x Shackles in this auction.
See our other listings for more lots of these Shackles.

6x Bow Shackles, 8.5-ton Capacity

Skylarc Ref I171698

6x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter blue painted pins.
6x Shackles in this auction.
See our other listings for more lots of these Shackles.

6x Bow Shackles, 8.5-ton Capacity

Skylarc Ref J171699

6x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter blue painted pins.
6x Shackles in this auction.
See our other listings for more lots of these Shackles.

5x Bow Shackles, 8.5-ton Capacity

Skylarc Ref K171700

5x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter yellow painted pins.
5x Shackles in this auction.
See our other listings for more lots of these Shackles.

5x Bow Shackles, 8.5-ton Capacity

Skylarc Ref L171701

5x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter yellow painted pins on 4x units. The fifth shackle has a non-original green bolt that does not screw in very far, see photos.
5x Shackles in this auction.
See our other listings for more lots of these Shackles.

10,000kg Capacity Ployester Web Sling

Skylarc Ref O171704

10,000kg Capacity Ployester Web Sling.
MoraLyft branded.
Manufactured 03/2005.
4-metre length.
235mm width.

10,000kg Capacity Ployester Web Sling

Skylarc Ref P171705

10,000kg Capacity Ployester Web Sling.
MoraLyft branded.
Manufactured 2005.
4-metre length.
235mm width

Bauer Express Mountain Bike

Skylarc Ref H171515

Bauer Express 6061 mountain bike frame
26 inch wheels
17 inch 43 cm frame size
6061 series alloy tubing
Front suspension
Shimano Altus rear derailleur
Shimano crankset and chainring
8 speed Shimano gear shifter
Promax V-brakes front and rear
Kickstand fitted
Reflectors on both wheels and pedals
Bauer branded saddle

Gears and brakes will require adjustment

Forklift Extension Forks

Skylarc Ref H171489

2200mm long and 175mm wide

Assorted Steel Box Section and Angle Iron Lengths

Skylarc Ref G171488

Assorted steel box sections included.
Multiple sizes of rectangular and square hollow sections visible.
Assorted angle iron lengths included.
Sections show surface rust on most pieces.

Campion and Irving Ltd 2500L Diesel Tank

Skylarc Ref D171485

Manufacturer Campion and Irving Ltd Christchurch
Serial number 3662-97 NO1
Test date 03/97
Capacity 2500 litres
Material 3MM AS1594-HA250
Design pressure atmospheric
Design temperature ambient
Contents diesel 0.85kg per litre
End fittings and piping present on the tank
Gauge installed on pipework
Labelled for diesel use
Mounted on four steel legs
Steel construction

HOLYTEK Dust Collector SF-4075

Skylarc Ref B171483

Manufacturer HOLYTEK
Model number SF-4075
Serial number 1232081
Manufacture date 08/2012
Motor power 7.5 HP
Voltage 400 V
Frequency 50 Hz
Phase 3

Metal Storage Cabinet

Skylarc Ref N171443

Metal storage cabinet with two swing doors
Cabinet exterior painted in grey and green
Top surface shows visible rust and wear
Doors have simple latch for closure
Cabinet stands on metal legs
Interior features two metal shelves

Stainless Steel and Aluminum Metal Assortment

Skylarc Ref M171442

Assortment of stainless steel tubes
Assortment of aluminum angle and flat bar

Assorted Clamps and Spring Clamps Collection

Skylarc Ref Q171446

Includes multiple G clamps in various sizes.
Record 119 G clamps visible in blue, sizes 2 inch and 4 inch.
Some G clamps labelled as MILTAN brand.
Grey G clamps feature 2 inch size marking.
Set includes several metal spring clamps.
General 3 inch and 2 1/2 inch spring clamps visible.
3 inch spring clamp marked as model 160892C.
2 1/2 inch spring clamp marked as model 160872B.
Some clamps show surface rust and marks.

EDL Fasteners Metal Thread Screw and Nut Assortment Kit

Skylarc Ref R171447

EDL Fasteners assortment kit in metal case
Contains multiple sizes of zinc plated metal thread screws and hex full nuts
M4 x 10 metal thread screw pan
M5 x 10 metal thread screw pan
M6 x 12 metal thread screw pan
M8 x 20 metal thread screw pan
M4 x 20 metal thread screw pan
M5 x 20 metal thread screw pan
M6 x 20 metal thread screw pan
M8 x 30 metal thread screw pan
M4 x 30 metal thread screw pan
M5 x 30 metal thread screw pan
M6 x 30 metal thread screw pan
M8 x 40 metal thread screw pan
M4 hex full nuts zinc plated Qty 200
M5 hex full nuts zinc plated Qty 200
M6 hex full nuts zinc plated Qty 200
M8 hex full nuts zinc plated Qty 200
Kit includes divided storage compartments
Includes metal case with latch

EDL Fasteners Hex Set Screws Assortment Kit

Skylarc Ref S171448

EDL Fasteners hex set screws kit in a gray metal carry case
Contains multiple compartments with various hex set screws
Series includes M6 x 12 CL8.8 zinc plated set screws
M6 x 20 CL8.8 zinc plated set screws
M6 x 30 CL8.8 zinc plated set screws
M6 x 50 CL8.8 zinc plated set screws
M8 x 12 CL8.8 zinc plated set screws
M8 x 20 CL8.8 zinc plated set screws
M8 x 30 CL8.8 zinc plated set screws
M8 x 50 CL8.8 zinc plated set screws
M10 x 16 CL8.8 zinc plated set screws
M10 x 25 CL8.8 zinc plated set screws
M10 x 35 CL8.8 zinc plated set screws
M10 x 50 CL8.8 zinc plated set screws
M12 x 25 CL8.8 zinc plated set screws
M12 x 30 CL8.8 zinc plated set screws
M12 x 40 CL8.8 zinc plated set screws
M12 x 50 CL8.8 zinc plated set screws
Includes hex nuts in plastic bags
Plastic partitions separate contents
Case shows marks and wear

EDL Surefix Wood Screw Assortment Case Zinc Chromate

Skylarc Ref T171449

Assortment case of EDL Surefix wood screws.
Screws are zinc chromate coated.
Case contains 18 compartments with various screw sizes.
Sizes include 6g x 5/8 inch, 6g x 3/4 inch, 6g x 1 inch, 6g x 1 1/4 inch, 8g x 3/4 inch, 8g x 1 inch, 8g x 1 1/8 inch, 8g x 1 1/4 inch, 8g x 1 1/2 inch, 8g x 1 3/4 inch, 8g x 2 inch, 8g x 2 1/2 inch, 8g x 3 inch, 10g x 2 1/2 inch, and 10g x 3 inch, 10g x 4 inch.
Screws are countersunk square drive.
Label indicates original quantities of 50 or 200 per size as specified on the case lid.
Metal storage case with closing latch.
Product codes and quantities for each size are listed on the inside lid.
Reorder code for case: ASSML1.
Actual quantities may differ from original specified amounts.

EDL Fasteners Metal Case with Assorted HWF Screws and Fasteners

Skylarc Ref U171450

EDL Fasteners metal case with latch and multiple compartments
Contains assorted hex head screws and fasteners
Includes HWF Self-Drillers and HWF Type 17 Screws with Neo washers
Multiple sizes present including 12-14 x 25 mm, 12-14 x 35 mm, 12-14 x 45 mm, 12-14 x 55 mm
Also contains 14-10 x 22 mm, 14-10 x 50 mm, 14-10 x 65 mm, 14-10 x 75 mm
Includes 12-11 x 25 mm, 12-11 x 40 mm, 12-11 x 50 mm, 12-11 x 65 mm
Contains 5/16 x 42 mm nutsetter for 12g screws and 3/8 x 45 mm hex nutsetter for 14G screws
Class 4 fasteners
Driver bits are included for nutsetters
Compartment quantities range from 50 to 100 units each depending on size
Grey painted steel case

EDL Fasteners Rivets Assortment Case

Skylarc Ref V171451

EDL Fasteners assortment case included
Case contains multiple compartments
Assortment includes aluminium rivets
Labelled compartments for various types and sizes
Listed sizes include 73 AS 4-2 Rivets code 73AS42RP qty 400
73 AS 5-2 Rivets code 73AS52RP qty 300
73 AS 6-2 Rivets code 73AS62RP qty 200
73 AS 4-4 Rivets code 73AS44RP qty 400
73 AS 5-4 Rivets code 73AS54RP qty 300
73 AS 6-4 Rivets code 73AS64RP qty 200
73 AS 4-6 Rivets code 73AS46RP qty 400
73 AS 5-6 Rivets code 73AS56RP qty 300
73 AS 6-6 Rivets code 73AS66RP qty 200
73 ASL 4-4 Large Flange Rivets code 73ASL44RP qty 400
73 ASL 5-4 Large Flange Rivets code 73ASL54RP qty 300
73 ASL 6-6 Large Flange Rivets code 73ASL66RP qty 200
Grey metal case with latch closure
Contents appear partially used
Case is labelled with EDL branding

Assorted Work Gloves and Protective Gloves

Skylarc Ref W171452

Multiple pairs of white fabric work gloves are included.
Some gloves are still in plastic packaging.
Various leather gloves are present, including red and brown pairs.
A black plastic bin is used for containment.
Some gloves have green trim on the cuffs.
A package of blue disposable gloves is visible.
A green plastic bag contains additional gloves.
Gloves appear to include both fabric and leather materials.

TengTools Red Metal Tool Chest

Skylarc Ref X171453

TengTools brand metal tool chest
Red color with TengTools logo and graphic on front
Top lid opens upward with supporting arms
Five drawers of varying sizes
Metal side handles on both sides
Drawers have foam lining
Comes with two keys
Contents shown in drawers include assorted welding tips and spare parts
Contents in drawers as pictured are included
Rocol J166 copper anti-seize compound tube present in one drawer
Main structure is metal
Locking mechanism on front with keyhole

Assorted C Clamps and F Clamp Lot

Skylarc Ref Z171455

Lot includes multiple metal C clamps of various sizes.
Includes one metal F clamp with a red wooden handle.
Some clamps have visible rust.
One C clamp is marked Forged 8.
One C clamp is marked Forged 6.
One C clamp is marked Rolan 8.
Threads and handles are present on most clamps.
Clamps are made of metal construction.
The lot is sold as a single group.
No model numbers visible on most clamps.

Assorted Electrical Building Wire Reels

Skylarc Ref A171456

Lot includes multiple reels of electrical building wire.
Reels contain different colours including red black white yellow and green.
Various wire types are visible including building wire and earth wire.
Labels show 1.5mm2 1C PAC HR PVC RED 1kV building wire.
Labels show 1.5mm2 1C PAC HR PVC BLK 1kV building wire.
Labels show 2.5mm2 1C PAC HR PVC RED 1kV building wire.
Labels show 2.5mm2 1C PAC HR PVC ALUMINUM 1kV earth wire.
Labels show 16mm2 1C PAC PVC WHI 1kV building wire.
Some spools are plastic and some are cardboard.

Mikasa MGX 280W Concrete Vibrator

Skylarc Ref B171457

Mikasa brand model MGX
Rated power 280W
Voltage 230V
Frequency 50-60Hz
Current 2.0A
Speed 12000-15500 V.P.M
Made in Japan
Serial number S1748A
Fitted with three pin plug
Handheld motor unit with attached flexible shaft and vibration head
Metal construction housing
Model number on label NPA-1215

Assorted Tie Down Straps and Lifting Slings

Skylarc Ref C171458

Lot of assorted tie down straps and lifting slings.
Includes three metal ratchet tie down straps with blue webbing and double J hooks.
Includes two rolled webbing straps with hooks.
Includes four green flat webbing slings.
One green webbing sling is labeled 5000KG.
Some webbing slings are wrapped in plastic film.
Includes one sling with visible manufacturer label listing test certificate details.

Assorted Industrial Hardware and Workshop Parts in Boxes

Skylarc Ref D171459

***CRATE NOT INCLUDED***
Lot contains mixed industrial hardware and workshop parts in cardboard boxes.
Contents include nuts, bolts, screws and fasteners in plastic trays.
Multiple pressure gauges are visible in the selection.
Several rolls of abrasive sanding belts are present.
Boxes include a range of hose fittings and connectors.
Visible wire brush and small hand tools in trays.
Various electrical and mechanical fittings are included.
Contains plastic oil container and miscellaneous metal parts.
Includes a yellow box labeled Tweco MIG Conduit.
Steel brackets and pipe sections can be seen among contents.
Included are a number of pressure regulators and valves.
Some automotive-style headlamps and cables included.

Bals CEE Norm 16A 200-250V Extension Leads and Cables

Skylarc Ref E171460

Lot of extension leads and cables with Bals CEE Norm connectors
Connectors are Bals CEE Norm 16A 6h 200-250V
Connectors are two pole plus earth and rated IP67
Marked Typ 31240 Made in Germany
Multiple leads with yellow and black outer sheathing
Some cables are supplied on a reel
Some connectors have attached safety tags
Includes both plug and socket types

Record No 5 vice on stand

Skylarc Ref C171484

Record No 5 vice on stand

vice has some fault which doesn't allow it to open using the handle

Forklift Extension Forks

Skylarc Ref P172199

3200mm long and 250mm wide

Steel Frame Workbench

Skylarc Ref G171462

Steel frame workbench with rectangular top.
Top surface covered with coarse fabric material.
Bench frame is painted blue.
Six leg design for support.
Diagonal bracing for stability.
Welded steel leg construction.
Edge and surface wear present on benchtop.

Heavy Duty Workbench with Blue Steel Frame

Skylarc Ref H171463

Workbench features blue painted steel frame construction
Top surface is covered with coarse woven material
Rectangular tabletop shape
Tabletop is fastened to the frame with visible metal fasteners
Frame includes diagonal support braces for stability

Steel Workbench with Record 35P Steel Vice

Skylarc Ref J171465

Steel workbench with rectangular steel top.
Bench surface shows rust across the top and shelf.
Contains a Record Steel 35P bench vice mounted on the top surface.
Bench has four steel legs.
Lower steel shelf divided into three sections.
Vice is manually operated via handle.
Bench is constructed with welded steel frame and flat steel surface.

Sunlight 150mm Adhesive & Grip Backed Sanding Disks

Skylarc Ref G173672

Sunlight 150mm Adhesive & Grip Backed Sanding Disks.
Includes:
2x 100-piece boxes of Part No.01308, 130-grit PSA Film adhesive backed disks.
- 1x 100-piece box of Part No.01410, 180-grit grip back disks.
- 4x 100-piece boxes of Part No.01406, 80-grit grip back disks.
- 5x 100-piece boxes of Part No.01408, 120-grit grip back disks.

All are as new unused. Counts within boxes not verified.

2x AmPro Portable Engine Air Cleaning Guns, New

Skylarc Ref M173652

2x AmPro Portable Engine Air Cleaning Guns.
Both are Part No.A1449.
Both tools are new never used in boxes, opened for photos only.
Both boxes show exterior workshop storage wear.

DeWalt 125mm Corded Angle Grinder DWE4151

Skylarc Ref J168054

DeWalt 125mm Corded Angle Grinder.
Model No. DWE4151
Includes side handle and original box.
Disk changing tool is missing.
Tool had been electrical tested but appears never actually used.

Grundfos AllDOS DME375-10AR Dosing Pump w/ Stand

Skylarc Ref F168336

Grundfos AllDOS dosing pump.
Model DME375-10AR PV/V/G-F-31A2A1.
Type label indicates IP65 protection rating.
Power supply rated for 100-240V 50/60Hz.
Maximum current 2.4A.
Maximum power 240W.
Maximum pressure 1.0 MPa (10 bar).
Maximum flow rate 3.75 l/h.
Control panel with display.
Mounted on a metal stand 300x260x600mm.
Includes connected hoses and fittings as pictured.
Fitted with 16A 250V 50Hz power plug with damaged pins, see photo.
Made in France.

Ozito Angle Grinder Kit 125mm 1200W AGB-1201

Skylarc Ref V171867

Ozito Angle Grinder Kit model AGB-1201
Cutting diameter 125mm 5 inch
Motor power 1200W
No load speed 12000rpm
Spindle thread M14
Bore size 22mm
Comes with angle grinder
Includes metal grinding disc
Includes metal cutting disc
Includes diamond cutting wheel
Includes grinding guard and cutting guard
Side handle included
Pin wrench included
Instruction manual included

Pair of Steel Saftety Barrier Doors

Skylarc Ref Q171160

Pair of Steel Saftety Barrier Doors
Made from 25x25mm angle steel frames with 4mm wire surfaces, 45x45mm square gaps between wire.
Each has hinge posts on one side and floor, ceilling, and side latching bolts, see photos for further design details.
Each door panel is 1250mm wide, 1800mm tall.
Painted in yellow.
Note that the wall mounted portion of the hinges are missing.

Leather Motorcycle Suit w/ Duffle Bag

Skylarc Ref E171642

Leather Motorcycle Suit w/ Duffle Bag.
Unable to locate any tags on suit so manufacturer, model, and official size details are unknown.
Padded knees and elbows and shoulder areas.
Some approximate measurements taken by us are as follows:
Crotch to bottom of pant leg approx 710mm.
Arm pit to end of sleeve approx 490mm.
Hip circumference approx 1000mm.
Shoulder width approx 500mm.
Chest circumferance measured from sbout arm pit level approx 1080mm.
Length from top of back collar to bottom of legs approx 1540mm.

Also includes light canvas RoadGuide labeled Duffle Bag approx 660x400x480mm.

Suit shows some usage scrapes and marks. Duffle Bag shows dust and usage.

8x Modern Office Boardroom Chairs

Skylarc Ref Z171689

8x Modern Office Boardroom Chairs.
Unknown manufacturer.
Manufacturerd in 2016.
Modern design with soft faux black leather seat and backs with chrome metal arm rests and legs.
All are on castors for mobility.
Seat height adjustable from approx 450mm to 550mm.
Seat width between armrests is approx 510mm.
Total Seat width 590mm.
Back height from Seat 470mm.
All show generally light usage marks, mainly on chrome arm rests and leg ends.
See our other auction for another lot of 8 of these office chairs.

8x Modern Office Boardroom Chairs

Skylarc Ref A171690

8x Modern Office Boardroom Chairs.
Unknown manufacturer.
Manufacturerd in 2016.
Modern design with soft faux black leather seat and backs with chrome metal arm rests and legs.
All are on castors for mobility.
Seat height adjustable from approx 450mm to 550mm.
Seat width between armrests is approx 510mm.
Total Seat width 590mm.
Back height from Seat 470mm.
All show generally light usage marks, mainly on chrome arm rests and leg ends.
See our other auction for another lot of 8 of these office chairs.

CG-30 Tiger Gas Track Cutter w/ 2x Tracks

Skylarc Ref X171713

CG-30 Tiger Gas Track Cutter.
Includes 2x Tracks, one track is new and unused in manufacturerr packaging.
Single phase.

17x Large Galvanized Turnbuckles

Skylarc Ref Z171715

17x Large Galvanized Turnbuckles.
45mm thread diameter
Body 410mm long, 67mm diameter.
Some have D-shackles attached.

13x Large Galvanized Turnbuckles

Skylarc Ref A171716

13x Large Galvanized Turnbuckles.
50mm thread diameter
Body 410mm long, 75mm diameter.
Some have D-shackles attached.

Campbell Hausfeld Air Cut-off Tools & Die Grinder

Skylarc Ref W171738

Campbell Hausfeld Air Cut-off Tools & Die Grinder.
Includes:
- 2x Air Cut-off Tolls, both Model No.TL1135.
- 1x Air Die Grinder Model No.PL154199

All are untested.

Metric Thread Tap Set

Skylarc Ref J171439

Metric Thread Tap Set.
Unknown manufacturer.
Diameters up to 18mm.
Most taps appear unused or slightly used.
Set is not complete, see photos.
Steel case measures 485x320x46mm.
Steel case exterior shows workshop storage wear. One case latch is damaged.

Metric & Imperial Thread Tap Set

Skylarc Ref I171438

Metric and Imperial Thread Tap Set.
Unknown manufacturer.
Most taps appear used and dusty. There are more taps than storage slots so some are not original.
Steel case measures 485x320x46mm.
Steel case exterior shows workshop storage wear.

Metric Thread Die Set

Skylarc Ref H171437

Metric Thread Die Set.
Unknown manufacturer.
Most Dies appear used and dusty.
A few dies are missing and all die Wrenches are missing, see photos.
Steel case measures 485x320x46mm.
Steel case exterior shows workshop storage wear.

Assorted Stainless Turnbuckles, D-Shackles, Pulleys, & More

Skylarc Ref E172084

Assorted Stainless Turnbuckles, D-Shackles, Pulleys, & More.
Most items are stainless steel, a few others are non-stainless.
See photos for further details on included items.
Items appear unused but dusty from open box storage.

12-Ton Flat Web Lifting Sling

Skylarc Ref E173644

12-Ton Flat Web Lifting Sling.
12-metre length.
290mm width.
Lift Master branded.

Assorted Steel & Leather Stamps

Skylarc Ref P173655

Assorted Steel & Leather Stamps.
One incomplete set of circular leather hole stamps.
Remaining six sets are steel letter and number stamps.
Letter/number sizes include 3mm, 4mm, 7mm, 8mm.
Some sets are incomplete, see photos.
Condition varies with each item.

10-Ton Flat Web Lifting Sling

Skylarc Ref T173659

10-Ton Flat Web Lifting Sling.
10-metre length.
100% Polyester construction.
3000mm width.
Titan branded.

10-Ton Flat Web Lifting Sling

Skylarc Ref U173660

10-Ton Flat Web Lifting Sling.
10-metre length.
100% Polyester construction.
3000mm width.
Titan branded.

Iscar Indexable Grooving Tool GHIR 25-25-4

Skylarc Ref G170292

Iscar Indexable Grooving Tool GHIR 25-25-4.
200mm length.
As new with Torx key tool and plastic case.

Iscar Indexable Grooving Tool GHIR 25-25-4

Skylarc Ref H170293

Iscar Indexable Grooving Tool GHIR 25-25-4.
200mm length.
As new with Torx key tool and plastic case.

2x Pneumatic Cylinders by SMC

Skylarc Ref E163616

2x Pneumatic Cylinders by SMC.
Both are Part No.C92ST50-125Y-SP
Housings measure 215x70x70mm
Shafts are 2pmm diameter, 125mm long.
12mm diameter air feed connection holes.
Both appear used.

Sew Eurodrive Motor & Gearbox

Skylarc Ref L165456

See photos for specification plates.

Press Brake V-Block, 2770mm Length

Skylarc Ref H165114

Press Brake V-Block, 2770mm Length.
Unknown manufacturer.
See photos for design details.

Refrigerated Glass Canopy Ingredient Unit, shipping damaged

Skylarc Ref W162672

Refrigerated Glass Canopy Ingredient Unit.
Unknown brand.
Model No.VRX1800/380
Operating temperature 2⁰ to 8⁰C
Stainless steel body.
Glass cover.
Inner tray basin size 1450x305mm.
Condition - Factory plastic covering still partially on interior of basin. Inner basin shows no indications of usage. Glass covering Brackets are bent and twisted, see photos, though glass is not cracked or broken. Bending in steel panel near power cord. Powers on and seems to sound normal when running. Possibly an unused unit with shipping damage?

Commercial Benchtop Donut Maker

Skylarc Ref X162673

Commercial Benchtop Donut Maker.
Unknown brand.
Model No.T-101
Single Phase 16A plug.
Stainless steel construction.
Very dirty and oily surfaces, would benefit from a major cleanup.
Unknown if operational.

Wooden Workbench with Wheels

Skylarc Ref V168638

Wooden workbench with rectangular design
Raised wooden shelf attached on one end
Lower sliding wooden platform insert on one side
Two fixed wooden legs on one end
Two steel wheels fixed to the other end for movement
Multiple reinforcing wood cross supports
No visible electrical or mechanical components
Work surface and platforms show signs of use

Pants Measuring Table

Skylarc Ref M110118

Pants measuring table with wooden construction
Mounted on a metal support stand with base plate
Features a measuring tape along the central channel
Equipped with a mechanical counter at the top end
Two metal hooks at the lower end
Central slot runs most of the length of the table
Table has an affixed mechanical tally counter with manual dials

Ryobi GrindForce 6500 150mm Grinder Sander HBGL650

Skylarc Ref I110036

Ryobi GrindForce 6500 150mm grinder sander
Model HBGL650
Power rating is 1/2HP 375 watts
Voltage is 240V
Frequency is 50Hz
No load speed is 2850 RPM
Current draw is 1.95A
Grinding wheel size is 150mm x 20mm
Belt size is 50mm x 686mm
Includes integrated wheel dressing tool
Fitted with a lamp on a flexible stalk
On and off switch located on front panel
Coolant tray attached at front base

Locking Pliers and C-Clamp Pliers Assortment

Skylarc Ref Q171784

Assortment includes five locking pliers and two C-clamp locking pliers
One C-clamp locking plier marked C.H. Hanson 2234012
One locking plier marked Vise-Grip The Original
C-clamp pliers designed for wide flat jaw clamping
Total of seven individual pieces in lot

110 Piece Metric Tap and Die Set with Assorted Taps and Dies

Skylarc Ref R171785

110 piece metric tap and die set in blue metal case
Includes a range of round dies
Includes die stocks and tap wrenches
Box contains assorted additional taps and dies

Tapmatic 70 TC/DC Reversible Tapping Attachment

Skylarc Ref T171787

Tapmatic 70 TC/DC reversible tapping attachment
Capacities M5 to M18 and #10 to 5/8 inch
Maximum RPM 1000
Manufactured by Tapmatic International Corporation
Made in Kriessern, Switzerland
Patented design
Label on unit specifies model and specifications

Tapmatic SM8 Tapping Attachment

Skylarc Ref U171788

Tapmatic SM8 tapping attachment.
Capacity M12-M30.
Capacity 1/2 inch to 1 1/8 inch.
Shank is square drive.
Markings indicate #11 on body.
Tapping tool is included in the attachment.

Set of Three Metal Bar Clamps

Skylarc Ref W171790

Set includes three metal bar clamps.
One clamp has a length of 500mm.
One clamp has a length of 340mm.
One clamp has a length of 275mm.
Each clamp features a screw mechanism for tightening.
Handles are attached to the screw for operation.
All clamps are constructed from metal.

Assorted Allen Key and Hex Key Sets

Skylarc Ref F171799

Multiple sets of L-shaped hex keys included.
Various sizes across metric and imperial.
Some keys with ball ends.
Sets include brands such as Holex and Tolsen.
Plastic holders and folding handles are present.
Loose individual hex keys included.
Includes T-handle hex keys.
Assorted colours for holders: black, red, green, and blue.

600x Pairs of White Cotton Gloves, New Bulk Lot

Skylarc Ref U170254

600x Pairs of White Cotton Gloves.
Red wrist ring colour.
New Bulk lot.
See our other listings for more Bulk lots of these Gloves.

Assorted Allen Keys Hex Keys Lot

Skylarc Ref G171800

Lot includes a large assortment of Allen keys and hex keys.
Various sizes and lengths are present in the lot.
Some keys include plastic tags or holders.
Materials appear to be metal construction.
Ball-end variants are included among the collection.
Keys are both metric and imperial types though specific sizes are not marked.
Multiple colours of handle tags are included.

600x Pairs of White Cotton Gloves, New Bulk Lot

Skylarc Ref V170255

600x Pairs of White Cotton Gloves.
Red wrist ring colour.
New Bulk lot in large manufacturer bale, see second photo. Photos of gloves on table are indicative.
See our other listings for more Bulk lots of these Gloves.

3 x Steel Louvered Panels 910mm x 300mm

Skylarc Ref K171804

Three steel panels included
Each panel measures 910mm x 300mm
Panels have louvered slots
Panels include pre-drilled mounting holes on edges
Panels are painted white
Suitable for wall mounting or shelving systems

10x Assorted Morse Taper Drill Shank Adapters

Skylarc Ref X170257

10x Assorted Morse Taper Drill Shank Adapters.
Includes:
- 4x No.5 to No.4
- 1x No.4 to No.3
- 1x No.4 to No.2
- 1x No.3 to No.2
- 2x No.4 to No.4
- 1x No.3 to No.4

Assorted Bolts Nuts and Washers in Storage Cases

Skylarc Ref L171805

Two plastic storage cases with clear lids and red internal compartments.
Contents include assorted bolts, nuts, and washers of various sizes and types.
Each case has a molded carry handle and one locking clip
Compartments are organized by type and size of hardware components.
Cases are stackable for storage and transport.

Assorted Spanner Wrench Set for Milling Chucks and Collets

Skylarc Ref M171806

Set includes 11 spanner wrenches of various sizes and shapes
Two wrenches are marked BIG Milling Chuck 80-90 and 68-75
One wrench marked ETM ER32
One wrench marked V-32
One wrench marked ER40
Wrenches are designed for use with milling chucks and collets
All wrenches have a hole at the end of the handle
Construction material appears to be metal
Some wrenches have flat spanner ends with two or more notched points
Some wrenches have hook or pin-style ends
One wrench features two protruding pins at the head

Assorted Hand Tools and Workshop Accessories

Skylarc Ref N171807

Four grease guns
One plug-in fluorescent work light with power cord.
Three wire brushes with red handles.
Four tape measures including two marked 5m and one marked 7.5m.
One bolt cutter with blue handles.
One L-shaped crank handle.
One black and blue LED work light.
One long red tool case with drill bits or rods inside.
One pair of long nose pliers.
One pair of diagonal cutters.
One additional hand tool with black handle.

600x Pairs of White Cotton Gloves, New Bulk Lot

Skylarc Ref W170256

600x Pairs of White Cotton Gloves.
Red wrist ring colour.
New Bulk lot in large manufacturer bale, see second photo. Photos of Gloves on table are indicative.
See our other listings for more Bulk lots of these Gloves.

155mm Milling Vice

Skylarc Ref I170268

Milling Vice, unknown manufacturer.
155mm wide jaws.
Opens to approx 150mm.
Mounting bolt slots spaced approx 350mm and 190mm apart.
See photos for design details.

Adjustable Angle Milling Vice

Skylarc Ref L170271

Adjustable Angle Milling Vice.
Unknown brand.
150mm wide jaws.
Circular base 230mm diameter.

160mm Milling Vice

Skylarc Ref J170269

Milling vice with 160mm wide jaws.
Opens to approx 120mm.
Unknown manufacturer.
Mounting bolt slots spaced approx 350mm and 160mm.
Includes removable crank.

Milling Vice with modified jaws

Skylarc Ref K170270

Milling Vice with modified jaws.
Unknown manufacturer.
Stationary jaw 160mm wide.
Moving jaw had been modified with a 205mm long steel bar welded to threaded screw, see photos.
Opens to approx 170mm.
Includes removable crank.
Side mounting bolts slots spaced approx 200mm appart.

Somta 35mm Reamer

Skylarc Ref T170279

Somta 35mm Reamer.
H7
22/11
No.4 tapered shank.
With plastic case.
Unknown if used.
Case shows workshop storage wear

Blue Welding Shields

Skylarc Ref H171827

Set of blue welding shields shown unfolded and folded.
Eyelet holes present on the edges for mounting or hanging.
Material appears to be flexible synthetic sheet.
separate shields visible in images.
Each shield is solid blue in colour.

Welding Tools and Consumables Lot

Skylarc Ref J171829

Includes Fusion brand welding apron.
Four chipping hammers with coil spring handles.
One tape measure marked W8.
One black hot glue gun with power cord and NZ plug.
One twin gauge gas regulator.
One yellow container of KKSWEL stainless steel electrodes 3.2mm x 350mm.
One red Weldwell general purpose electrodes box 3.2mm.
One Weldwell low hydrogen electrodes box 3.2mm.
One tube of cadmium rods labelled AWS A5.8 S45FC16-10.
One unused Takulla stainless steel grinding disc 125 x 6 x 22.23mm.
One unused SL Carborundum grinding wheel 200 x 25 x 31.75mm.
One gas hose with fittings.
One BOC branded TIG torch with red hose.

Tradie Roofers Safety Kit by B-Safe

Skylarc Ref Y170284

Tradie Roofers Safety Kit by B-Safe.
Kit No.BK0612q5TRAD
Kit includes:
- Fall arrest harness, Expiry date of 01/2026.
- 15-metre rope safety line, manufactured 01/2016.
- 2x tear Webbing shock absorbers, Expiry dates of 03/2026
- 2x carabiners
- canvas backpack.

Kit appears unused. Backpack exterior shows dirt and wear from storage.

Industrial Spill Kit

Skylarc Ref Z170285

Industrial Spill Kit.
Controlco branded canvas bag measures approx 600x250x200mm.
Spill capacity 20L.
See photos for included components.
Contents as new unused. Bag exterior shows dust and marks from Workshop storage.

MTENN 2525M-16W-M Turning Tool Holder

Skylarc Ref N171833

Model MTENN 2525M-16W-M is engraved on the toolholder.
Toolholder designed for indexable insert use.
Rectangular shank construction.
Two mounting holes on end for secure fixing.
Gold-colored indexable insert included and installed.
Insert is clamped with a top clamp and screw.
Engraved code 76729 is visible on the shank.

Iscar MTENN 2525M-16W Turning Toolholder

Skylarc Ref O171834

Iscar branded toolholder.
Model MTENN 2525M-16W marked on shank.
Toolholder accepts replaceable carbide insert capable of external turning applications.
Shank size is approximately 25mm x 25mm.
Square shank configuration.
Carbide insert fitted to toolholder.
Retaining screw present for insert clamping.
Suitable for use with compatible CNC or manual lathe systems.
Steel construction.
One insert is installed.

Horn Grooving Toolholder 228.0050.0348

Skylarc Ref C170288

Horn Grooving Toolholder 228.0050.0348 is shown.
Made in Germany.
Horn manufacturer number 2666863.
The body is marked 228.0050.0348.
250mm long, 50mm diameter.
Appears as new unused.
Also includes 10x new inserts Part No.231.7512.4324 MG 12

Nesemf GHIC-50-85 Boring Bar

Skylarc Ref P171835

Manufacturer Nesemf
Model GHIC-50-85
Marking 96860 engraved on tool
Boring bar with insert holder
Steel body construction
Flat shank with round mounting end
Three securing screws at cutter head
Cutter insert installed

Indexable Lathe Tool Holder 25511-031

Skylarc Ref Q171836

Indexable lathe tool holder.
Model number 25511-031 is stamped on the tool holder.
Square shank construction.
Insert clamp and securing screw included.
Overall rectangular shape with angled end for insert mounting.

Iscar R-3232P-08W Lathe Tool Holder

Skylarc Ref R171837

Model number R-3232P-08W stamped on the tool holder
Iscar branding is present on the body
Metal lathe tool holder with insert seat
Two screw holes on the rear end
Visible marking 08701-079 on the side
Insert and clamp appear to be fitted
Square shank design

Iscar MWLNR 3232P-08W Turning Toolholder

Skylarc Ref S171838

MWLNR 3232P-08W model.
Manufacturer marking appears as Iscar.
Square shank turning toolholder for indexable inserts.
Includes insert clamp and locking screw.
Designed for lathe external turning operations.
Tool shank size is 32x32mm.
Application specific for negative rake inserts.

Horn Grooving Toolholder 228.0050.0348 w/ Inserts

Skylarc Ref D170289

Horn Grooving Toolholder 228.0050.0348 is shown.
Made in Germany.
Horn manufacturer number 2666863.
The body is marked 228.0050.0348.
250mm long, 50mm diameter.
Appears as new unused but missing plastic case.
Also includes 8x extra new inserts Part No. 231.7512.4324 MG 12

Iscar GHGR 25-3 Grooving Toolholder

Skylarc Ref T171839

Iscar GHGR 25-3 toolholder.
Model number 64545.
Torque specification 6-8 Nm.
Grooving insert installed.
Suitable for use on lathes that accept this shank size and model.
Steel construction.

Iscar MWLNR 3232P-08W Lathe Tool Holder

Skylarc Ref U171840

Iscar MWLNR 3232P-08W lathe tool holder.
Tool holder body features MWLNR 3232P-08W marking.
Designed for use with indexable inserts.
Tool holder has a square shank.

Iscar GHGR 25-3 Grooving Toolholder

Skylarc Ref V171841

Brand Iscar
Model GHGR 25-3
Designed for grooving operations
Torque rating 6-8 Nm marked on the body
Rectangular steel shank
Machined slot and clamping screw for insert
No insert included
Marking number 91567 present on body
Suitable for use in CNC or manual lathes

Iscar HFHR-25-55-5T25 Lathe Tool Holder

Skylarc Ref W171842

Iscar branded tool holder.
Model HFHR-25-55-5T25 is engraved on the tool.
Designed for lathe operations.
Tool features a flat rectangular shank.
A slot and clamping screw are present at the cutting end.
Engraved with angular reference markings 55 and 70 degrees.

Sandvik Coromant Assembly Fixture Flange 391.510-140 50

Skylarc Ref E170290

Sandvik Coromant Assembly Fixture Flange.
Part No. 391.510-140 50.
For use with SZ C3, SZ C4, SZ C5, SZ C6, SZ C8 Coromant Capto®, DIN 69871/50, ANSIB 5.50-40. ISO7388/1-50, CAT 50, SZ 50, SZ 63 and SZ 80 Varilock® Holder.
As new unused used with plastic case.

https://www.dgisupply.com/product/SVK24915?srsltid=AfmBOoqkG946v_xT9wCTWiTI4rr65SojZcWgMw91oTWlaoLqSuyakTW2

Seco GHGR 25-3 Grooving Toolholder

Skylarc Ref X171843

Seco branded toolholder.
Model GHGR 25-3.
Serial number 36430.
Recommended torque 6-8 Nm is marked on toolholder.
Single screw clamp.
Rectangular shank design.
Cutter insert is installed.

Iscar GHGR 20-3 Lathe Grooving Toolholder

Skylarc Ref Y171844

Manufacturer Iscar
Model GHGR 20-3
Steel toolholder for lathe grooving applications
Equipped with a clamp and locking screw mechanism
Square shank design
Grooving insert is installed in the holder
Markings are visible on the toolholder body
Shank width is approximately 20 mm

Seco GHMR-16 Parting Grooving Toolholder

Skylarc Ref Z171845

Seco GHMR-16 parting and grooving toolholder.
Marking: 37803.
Designed for indexable inserts.
Torque specification 10-12 Nm is marked on the holder.
Rectangular shank.
Includes securing bolt for insert.