SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

2018 Range Rover Velar R-DYNAMIC SE

Skylarc Ref P174019

2018 Range Rover Velar R-DYNAMIC SE
3.0 v6 petrol engine
4 wheel drive
112244km on clock
8 speed automatic transmission
WOF Expired August 25
Registration on hold
Non runner
Engine removed and in unknown mechanical condition
Various parts located in back seat
Leather interior
Alloy wheels

Reason for engine removal unknown
Ex Liquidation

Kassow Robots RC02 Robot Arm w/ Controller

Skylarc Ref T170253

Kassow Robots robot arm, ID label worn so specific model is unknown. Arm is approx 1300mm in length.
Model RC02 robot controller.
Controller supply 100V-230V AC 16A.
Controller serial number 210604RC0004.
Kassow Robots teach pendant model TP02 included.
Teach pendant serial number 210607TP0001.
Robotiq grippers attached to robot arm.
Wiring harnesses and cables included.
Tool kit with assorted components and fasteners included.
CoBotics documentation manual included.
Includes heavy steel arm mounting column 635mm tall.
Controller box and pendant units powered on, see photos.
Formerly used to load a CNC lathe

Industrial De-Hairing Machine

Audience

46

Bidders

8

$1,010

Sold 21/07/2025

Skylarc Ref H167636

Industrial De-Hairing Machine
Main tank is 1400mm in diameter and 1150mm tall
Control Panel is 800mm x 400mm x 1200mm and sits inside a frame
All components are stainless steel
was previously used to remove hair off of cow hide.

5 Bays Of Pallet Racking

Skylarc Ref L171597

6 Uprights 2.4m high x 920mm wide
30 Cross bars 2.7m long
15 MDF shelf inserts

Any contents shown in photos NOT included.
BUYER to dismantle

Hikvision DS-9664NI-I8 Network Video Recorder

Skylarc Ref S174022

Brand: Hikvision
Model: DS-9664NI-I8
Device type: Network Video Recorder
Front panel USB port present
Two Western Digital hard drives installed
Each hard drive labeled 3.0TB Hikvision WD
Rear panel has two RJ45 LAN ports labeled LAN1 and LAN2
Rear panel has RCA line in and two audio out connectors
Rear panel has two HDMI outputs labeled HDMI1 and HDMI2
Rear panel has two VGA outputs labeled VGA1 and VGA2
Rear panel has RS-232 port
Rear panel has USB 3.0 port
Rear panel has eSATA port
Rear panel has RS-485 KB and alarm out terminal blocks
Rear panel has AC 100 to 240V power input with switch
Rack ears fitted for rack mounting
Remote control included as shown

No key Front panel where hardrives located but currently unlocked
No monitor

Current admin password hikvision123!@
Pattern L

3-Phase Belt Grinder Linisher, Faulty

Audience

105

Bidders

6

$893

Sold 22/09/2025

Skylarc Ref E167243

3-Phase Belt Grinder Linisher, Faulty
Kingston branded.
Model BSH-150C
Manufactured 08/2010.
150mm belt width, 2000mm belt length.
32A 3-phase plug.
Condition - A note on unit from vendor states that front wheel out of balance, rear wheel not true, and motor shaft may be bent. The note is shown in the photos.

Soco MC-370PV Cold Cut Saw

Skylarc Ref H173959

Brand Soco
Model MC-370PV
Cold saw for metal cutting
Manufactured April 2016
Serial number 0316MC370B034
Made in Taiwan
Supply voltage 415V
Three phase power
Frequency 50Hz
Total power 1.7kW
Fitted with 32A three phase plug
Uses blades up to 370mm diameter
Low speed 11rpm
High speed 22rpm
Mounted on integrated stand with coolant system
Includes installed 4-piece jaw attachment set
Includes two additional 4-piece jaw attachment sets

Anser U2 Pro S Thermal Inkjet Product Coding Printer

Skylarc Ref E172006

Anser U2 Pro S Thermal Inkjet Product Coding Printer.
Includes power adapter cable.
NOTE that the Remote control pad is missing, buyer will need to source a replacement to access Printer controls. We used a remote from another Anser U2 auction to test this unit.
Also includes the mounting apparatus the Printer was found attached to.
The Printer functions normaly.
See the manufacturer website below for further item details:
https://anser-u2-impresoras.com/en/products-shop/anser-u2-printers/u2-pros.html

3M Speedglas 9100 FX with 3M Adflo PAPR System

Skylarc Ref L173807

Brand: 3M
Model: Speedglas 9100 FX welding helmet
Powered air respirator unit: 3M Adflo
Adflo unit includes attached breathing hose
Adflo unit shows battery status indicator on top panel
Included charger: 3M Adflo Li-Ion Battery
Charger label states Li-Ion battery type
Black fabric head cover attached to rear of helmet
Helmet and Adflo system supplied in black 3M Speedglas carry bag
Carry bag has zip closure and webbing handles

Plastic Link Conveyer

Skylarc Ref G174062

Stainless steel frame conveyor.
White plastic modular belt.
Side guides with black plastic clamp knobs.
Adjustable stainless steel legs with threaded feet.
Three phase AC induction motor.
Motor model GS7134.
Motor power 550 W.
Motor voltage 380 V.
Motor current 1.56 A.
Motor frequency 50 Hz.
Motor speed 1400 r per min.
Motor protection rating IP55.
Motor weight 7 kg.
Motor duty S1.
Motor insulation class F.
Gearbox mounted to motor on conveyor end.
Includes separate electronic control box.
Control box has forward and reverse indicators.
Control box has digital display.
Control box has rotary speed control knob.
Power cable visible on control box.

Some damage to control box button.

Stainless Steel Hopper with Auger Conveyor

Skylarc Ref I174064

Stainless steel hopper on four leg frame
Hopper fitted with stainless steel mesh top and bar grid
Hopper outlet connected to inclined stainless steel auger conveyor tube
Inclined auger tube discharges through plastic outlet at top end
Hopper mounted on adjustable feet
Electric motor mounted under hopper driving auger via gearbox
Gearbox branded STM
Control box with two rotary switches mounted to hopper frame
Auger approx 3200mm long
Hopper approx 980mm x 780mm 880mm

Morris Chain Hoist

Skylarc Ref C167267

500kg

Stainless Incline Conveyor with SEW Eurodrive Motor

Skylarc Ref M174380

Inclined belt conveyor on stainless steel frame
Brand on side panel reads Independent Scales Ltd
Conveyor belt is white plastic modular type
Side guides are stainless steel
Drive motor is SEW-EURODRIVE N.Z. LTD
Motor nameplate type appears as DR63L4
Motor nameplate speed shown as 1500 rpm
Motor nameplate ratio shown as 60.00
Motor nameplate supply 230V 400V 50Hz
Conveyor frame mounted on four swivel castor wheels
Two castor wheels shown with foot brakes
32 amp plug
Approx 3300mm x 420mm usable conveyor

To see this machine running:
https://youtu.be/LWHeVIWaqmc

Lincoln Electric Miniflex 2000W Fume Extractor

Skylarc Ref R173813

Brand: Lincoln Electric
Model: MINIFLEX
Power rating: 2000W
Supply voltage: 230V single phase
Frequency: 50Hz
Control panel with Manual and Auto modes
Control panel with Low and High settings
Unit has integrated carrying handle
Unit has wheels for transport
Flexible hose attached to unit

Origin 35in-56in Height Adjustable Stainless Ski Pylon

Skylarc Ref I157536

2" diameter stainless steel adjustable height post. 7/8" x 1" diameter stainless steel arms. 6" diameter threaded stainless flush mount base.
Height: 35"-56"
All hardwares included for immediate installation.

Origin 35in-56in Height Adjustable Stainless Ski Pylon

Skylarc Ref H157535

2" diameter stainless steel adjustable height post. 7/8" x 1" diameter stainless steel arms. 6" diameter threaded stainless flush mount base.
Height: 35"-56"
All hardwares included for immediate installation

XCJ-1.1 Industrial Dust Collector

Skylarc Ref T172281

Model XCJ-1.1
Dust collector unit constructed from metal
Motor power 1.1kW
Voltage 380V three phase
Vacuum 19500Pa
Pump airrate 360m3 per hour
Unit weight 62kg
Mounted on four castor wheels for mobility

DMS Italia 1200 300 Industrial Screw Conveyor

Audience

16

Bidders

3

$272

Sold 22/09/2025

Skylarc Ref X168640

Manufacturer DMS Italia srl
Machine type 1200 300
Serial number 1200 300 2097
Constructed primarily from stainless steel
Fitted with an industrial auger screw mechanism
Equipped with an electric motor drive unit
Features large intake hopper and curved pipe outlet
Mounted on a steel frame base
Nameplate indicates origin in Arzignano Italy
Includes access hatches and pipe connection points
Suitable for use in industrial material handling applications
No further accessories or control panels visible

Vectothor Osprey Insect Exterminator

$270

Sold 30/11/2025

Skylarc Ref V172517

Model Osprey.
Input voltage 220-240V at 50-60Hz.
Power consumption 32W.
Lamp type 2 x 15 Watt UV-A.
Degree of protection IP20.
For indoor use only.
Serial number 2309.27988.
Uses Aston 15W UV insect control lamps.
Shatterproof lamp construction.
Measures 500x100x330mm

Bosch PBH 2900 FRE Boschhammer

Skylarc Ref Z171091

Brand: Bosch
Model: PBH 2900 FRE
Type: Boschhammer rotary hammer drill
Power rating: 730 Watt
Chuck system: SDS-plus
Drilling capacity in concrete shown: 4 to 26 mm SDS-plus
Drilling capacity in masonry shown: 4 to 68 mm SDS-plus core bit
Drilling capacity in steel shown: up to 13 mm
Drilling capacity in wood shown: up to 30 mm
Includes Bosch PBH 2900 FRE drill unit with power cord
Includes auxiliary side handle
Includes depth stop rod
Includes SDS-plus keyed chuck adaptor
Includes multiple SDS-plus drill bits in assorted sizes
Includes SDS-plus chisel bit
Includes boxed set of 6 SDS-plus drill bits sizes 5 to 10 mm
Includes additional mixed masonry and SDS-plus drill bits as shown
Supplied in green Bosch plastic carry case
Product has been tested and is operational

Heco 30 Ton Hydraulic Press

Skylarc Ref Q174384

Brand Heco.
Manufactured by Hansen Engineering Co Ltd.
Serial number H50965.
Maximum pressure 30 tons as per badge.
Hydraulic press frame on four swivel castor wheels.
Frame constructed from steel I-beam sections.
Press head includes pressure gauge calibrated in tons.
Handwheel operated ram mechanism.
Cable and geared winch assembly on side of frame.
Adjustable working height via multiple frame holes and pins.
Steel base cross member between uprights.

No lever bar or crank handle

RR Fisher DM3 Motorised Conveyor

Skylarc Ref K174378

Motorised conveyor on stainless steel frame
Driven by RR Fisher and Co Ltd motor No DM3
Motor rating 1.1 kW
Motor speed 16 RPM
Motor supply 400 volts
Motor frequency 50 Hz
Motor phase 3 phase
Motor current 2.7 amps
Conveyor belt is white
Frame is mounted on four castor wheels
Control box is Sprecher + Schuh KS3-12
Control box rating IP65
Control box has green start pushbutton
Control box has red stop pushbutton
Isolator and socket outlets are PDL brand
Isolator rating 20 amp 500 volt three phase 50 Hz
Socket outlet rating 20 amp 250 volt single phase 50 Hz
Supply plug rating 16 amp 500 volt
Supply plug PDL Cat No 56PA416

To see this running:
https://youtu.be/r0V5IJQkLqc

WEG 7.5kW Electric Motor w/ Turbo Start 355 Coupling

Audience

13

Bidders

6

$230

Sold 22/09/2025

Skylarc Ref H168338

WEG 7.5kW Electric Motor with Turbo Start 355 Coupling.
WEG brand electric motor
Motor Model: 3-160L
Rated power 7.5 kW at 50 Hz
Designed for three-phase operation.
Speed: 720-870 min⁻¹ depending on voltage and frequency
Enclosure rating: IP55
Insulation class F
Ambient temperature rating: 40°C
Mounting weight: 128 kg
Motor is Coupled with New Turbo Start Type 355 Hydrodynamic Coupling.
Fitted with 32 amp 500 volt plug.

Hayman Commercial Benchtop Heated Display Warmer

Audience

39

Bidders

5

$218

Sold 19/05/2025

Skylarc Ref X163245

Hayman Commercial Benchtop Heated Display Warmer.
Model No. NS4
Sliding glass doors on front and back, one side is missing handles.
Operates and heats but not tested at length.
Needs a good cleanup.

Go Milk Skim Milk Powder, 24x 400g Pouches, New

Skylarc Ref D172993

Go Milk Skim Milk Powder.
24x 400g Pouches in this auction.
Made and packaged in New Zealand
Manufactured dates of 09/09/2024
Best Before dates of 08/09/2026.
New, and last, of manufacturer's stock, get it while you can!
See our other listings for more of lots of this product.

Go Milk Skim Milk Powder, 24x 400g Pouches, New

Skylarc Ref B172991

Go Milk Skim Milk Powder.
24x 400g Pouches in this auction.
Made and packaged in New Zealand
Manufactured dates of 09/09/2024
Best Before dates of 08/09/2026.
New, and last, of manufacturer's stock, get it while you can!
See our other listings for more of lots of this product.

Cookes 1 Tonne Chain Block

Skylarc Ref M173808

Brand: Cookes
Type: Chain block
Rated capacity: 1 tonne
Standard: Complies to AS1418.2
Model: 10045106
Lift height: 6 m
Chain type: G80 alloy load chain
Chain size: 6.3 mm x 19 mm
Hook with safety latch fitted
Includes attached load chain and hook

320mm 4-Jaw Lathe Chuck

Skylarc Ref D173981

320mm 4-Jaw Lathe Chuck.
Jianhua branded.
6x 22mm diameter mounting pins spaced approx 70mm apart on centre.
105mm chuck thickness.
Approx 95mm diameter centre bore.
Chuck jaw key is missing.

Bosch GLL 30 G Green Laser Level with Tripod

Skylarc Ref W174286

Brand: Bosch
Model: GLL 30 G
Laser type: GreenLaser Technology
Laser class: Class 2
Laser output: less than 5mW
Wavelength range: 500 to 540nm
Power supply: 2 x 1.5V LR6 AA batteries
Compliance standard: IEC 60825-1:2014-05
Manufacturer: Robert Bosch Power Tools GmbH
Made in China
Tripod brand: Bosch
Tripod collapsed length: 500mm
Tripod full extension length: 1300mm
Includes Bosch GLL 30 G laser level unit
Includes Bosch tripod shown
Power tool warning label: Do not stare into beam

8x Portable Car Air Duster Vacuum Cleaners, Bulk Lot, New

Skylarc Ref D160131

8x Portable Car Air Duster Vacuum Cleaners.
Remax branded, all are Model No. XC-1
Built in rechargable batteries with USB-C charging.
250mm length (without attachments).
All are new store stock in retail packaging.

Grundfos JPC 4-47 PM1 15 Pump

Skylarc Ref E173800

Brand: Grundfos
Type: JPC 4-47 PM1 15
Controller type: PM 1
Model on controller: B 06
Serial number on controller: 0708924
Supply voltage: 1 x 220-240 V
Frequency: 50 Hz
Current: 3.8 A
Capacitor: 12.5 µF 450 V
Insulation class: F
Ingress protection rating: IP44
Input power P1: 0.85 kW
Output power P2: 0.8 HP
Flow range Q: 0.4-3.6 m3/h
Head range H: 41-20 m
Minimum head Hmin: 20 m
Maximum head Hmax: 47 m
Pump has BSPT threaded hose coupling on outlet
Unit has two claw hose couplings fitted
Power connection is a three pin plug
Motor housing has a visible crack in plastic casing

Pneumatic Double Diaphram Pump by FTI Air

Skylarc Ref K173988

Pneumatic Double Diaphram Pump.
Manufacturer FTI Air.
Pump model FT10P-PP-RRPRR-F1.
Serial number 22427 F21.
Made in the U.S.A.
Maximum operating pressure 100 PSI 6.9 BAR.
Pump type air operated double diaphragm.
19mm diameter 316 grade stainless steel inlet and outlet connectionns.
Overall pump dimensions approx 485x235x485mm.

Stainless Steel Bench

Audience

128

Bidders

11

$163

Sold 22/09/2025

Skylarc Ref F168570

Stainless steel work bench with splashback, ideal for commercial kitchen or workshop use
Approximate dimensions: 2400mm length x 750mm depth x 900mm height
Solid stainless steel top, easy to clean and maintain
Integrated rear upstand with two cable or waste holes
Round stainless steel legs provide support, though some movement in the legs is noticeable
Surface in good condition with minor cosmetic marks from previous use
Sturdy work surface suitable for a range of applications

Stainless Steel Tubing and Checker Plate Pallet

Audience

28

Bidders

4

$157

Sold 22/09/2025

Skylarc Ref K168315

Pallet contains stainless steel tubing.
Tubing includes sections with bends and tri-clamp fittings.
Pallet also contains stainless steel checker plate sheets.
Checker plates have a raised tread pattern.

Veit 4430-2 Absaugbügeltisch Ironing Table

Skylarc Ref V110101

Manufacturer: Veit KG Bekleidungstechnik
Model: 4430-2 Absaugbügeltisch
Serial number: 01891
Year of manufacture: 1981
Voltage: 220V
Frequency: 50Hz
Rated power: 0.28kW
Current: 1.27A
Weight: 50kg
Equipped with Veit 7905 component
Fitted with brown padded ironing surface
Includes integrated suction platform
Plug type and power cable shown in images
Physical switch and indicator lamp on front panel
Control lever located on the front side
Heating power specification not marked on label
Manufacturer location: Landsberg-Lech, Germany
Warranty card in German language included

Shirt Folder Machine

Skylarc Ref U110126

Shirt folder machine designed for use in garment processing.
Integrated metal frame with textile-covered work surface.
Unit includes control switches and adjustment levers mounted underneath the table.
Lower shelf provides additional storage.
Electrical input features a three prong plug and attached power cable.
Main control panel and mechanism located beneath work surface opening.
Includes pneumatic connection with attached red air hose.
Used condition indicated.

Air Tools Lot Impact Wrenches Ratchet Grinders Cutoff Tool

Skylarc Ref M171780

Lot of seven air tools included.
Three Snap-on brand air impact wrenches.
One air powered ratchet tool.
Two air die grinders.
One air cutoff tool with guard.
All tools have quick connect air fittings attached.

2x Philips 24" LED Monitors

$150

Sold 02/12/2025

Skylarc Ref G172528

Includes two Philips 24-inch LED monitors
One monitor model is 243V5Q, manufactured in 01/2020.
The other monitor model is 243V7Q, manufactured in 12/2019.
Each monitor has HDMI input.
Each monitor has DVI input
Each monitor has VGA D-Sub input.
Each monitor has 3.5mm audio in.
Both include power cables and HDMI cables.
Both include base stands.

2 x Norton 254 x 38 x 31.75mm Grinding Wheels

Skylarc Ref G173802

Brand Norton Saint-Gobain
Dimensions 254 x 38 x 31.75mm
Maximum operating speed 35m/s
Maximum rotational speed 2622rpm
Centre bore diameter marked 31.75mm

Moore & Wright 0-4" Outside Micrometer Set

Skylarc Ref I173804

Moore & Wright outside micrometer.
Manufactured by Moore & Wright (Sheffield) Ltd England.
Frame range marked 0-4 inch.
Graduated thimble.
Micrometer body marked 1-64 015625.
Supplied in fitted wooden case.
Includes multiple extension rods.
Includes spanner style adjustment tools.
Includes round setting or anvil piece.
Mechanical analog micrometer.

Sumner Fold-A-Jack Pipe Stand

Skylarc Ref Q173812

Fold-A-Jack folding pipe stand jack
Maximum capacity: 2500 lb (1140 kg)
Maximum height: 49 inches (1.2 m)
Tripod base with three legs
Screw jack height adjustment
Top fitted with two red roller heads

Sumner Fold-A-Jack Pipe Stand

Skylarc Ref P173811

Fold-A-Jack folding pipe stand jack
Maximum capacity: 2500 lb (1140 kg)
Maximum height: 49 inches (1.2 m)
Tripod base with three legs
Screw jack height adjustment
Top fitted with two red roller heads

Sumner Fold-A-Jack Pipe Stand

Skylarc Ref O173810

Fold-A-Jack folding pipe stand jack
Maximum capacity: 2500 lb (1140 kg)
Maximum height: 49 inches (1.2 m)
Tripod base with three legs
Screw jack height adjustment
Top fitted with two red roller heads

Sumner Fold-A-Jack Pipe Stand

Skylarc Ref N173809

Fold-A-Jack folding pipe stand jack
Maximum capacity: 2500 lb (1140 kg)
Maximum height: 49 inches (1.2 m)
Tripod base with three legs
Screw jack height adjustment
Top fitted with two red roller heads

Marlco Keyway Broach Set

Skylarc Ref Y171064

Brand Marlco.
Keyway broach set in metal case.
Label inside lid reads Keyway Marlco Broaches.
Label describes recommended shims for standard depth square keyways.
Label lists No.0 set for 1/16 in 3/32 in 1/8 in keyways.
Label lists No.1 set for 1/8 in 5/32 in 3/16 in 1/4 in 5/16 in keyways.
Label lists No.2 set for 5/16 in 3/8 in 7/16 in 1/2 in 9/16 in keyways.
Label lists No.3 set for 5/8 in 3/4 in keyways.
Several round push collars marked Marlco Co with different bore sizes.
Collars are stamped 1/2 in P 5/8 in P 3/4 in P 1 in P 1 1/4 in P 1 1/2 in P.
Multiple keyway broaches present.
Some broaches are stamped 1/8 in Marlco HSS.
Some broaches are stamped 5/32 Marlco HSS.
Some broaches are stamped 3/16 Marlco HSS.
Three thin bent metal shims included.
Green painted metal storage case with latch included.

duMONT Greenfield broach set

Skylarc Ref A171066

duMONT Greenfield broach set.
Multiple duMONT broach bushings marked 18M M-C Made in USA.
Includes bushings marked 19M M-C Made in USA.
Includes bushings marked 20M M-C Made in USA.
Includes bushings marked 22M M-C Made in USA.
Includes bushings marked 24M M-C Made in USA.
Includes bushings marked 26M M-C Made in USA.
Includes bushings marked 28M M-C Made in USA.
Includes bushings marked 30M M-C Made in USA.
Includes bushings marked 32M M-D Made in USA.
Includes bushings marked 34M M-D Made in USA.
Includes bushings marked 36M M-D Made in USA.
Includes bushings marked 38M M-D Made in USA.
Includes bushings marked 40M M-D Made in USA.
Includes bushings marked 42M M-D Made in USA.
Includes bushings marked 44M M-D Made in USA.
Includes duMONT 6 MM-C-1 H.S. broach.
Includes duMONT 8 MM-C-1 H.S. broach.
Includes duMONT 12 MM-D-1 H.S. broach.
Includes broach marked D1-14 HSS China.
Items are stored in a wooden case.

Stainless Steel Gravity Roller Conveyor Section

Skylarc Ref F174061

Gravity roller conveyor section.
Metal side frames with multiple parallel metal rollers.
Rollers are unpowered.
End plates are bolted to the side frames.

Craftright Plastic Storage Box With Taps And Dies

Skylarc Ref E174060

Brand Craftright Engineering Works.
Plastic storage box with 40 drawers.
Labelled size 500L x 160W x 250H mm.
Grey plastic case with yellow internal frame.
Drawers contain various taps.
Drawers contain various round dies and die nuts.
Some drawers are partially filled some empty
Plastic drawers are removable.
Unit has keyhole slots on the rear for mounting.

Labels may not be correct for what's in the drawer

NGK spark plug box lot

Skylarc Ref H171099

NGK spark plug assortment.
Multiple NGK boxed spark plugs

Bosch PSA 1150 Reciprocating Saw

Skylarc Ref L171077

Brand: Bosch
Model: PSA 1150
Model number: 3 603 CA8 040
Mains powered reciprocating saw
Rated power input 1150W
Rated voltage 230V to 240V AC
Rated frequency 50Hz
Rated current 5A
No load stroke rate 0 to 2700 min-1
Stroke length 29mm
Manufacture year 2014
Housing marked PA6-GF30
Tool-free blade clamp at front
Adjustable steel shoe at front
Supplied with attached power cord and plug
Includes hex key clipped to cord
Body colour green and black plastic with red trigger

2 Ton Jack Stands Pair

Skylarc Ref U171086

Pair of 2 ton jack stands
Rated capacity 2 ton per stand as shown on label
Minimum height 280mm
Maximum height 430mm
Base plate dimensions 180mm by 190mm
Ratchet style height adjustment
Steel construction with red finish
Saddle has U shaped profile
Labels include operating and safety instructions

Set of Adjustable Thread Chasers in Case

Skylarc Ref B171093

Set of adjustable thread chasers
Metal thread chaser bodies with threaded ends
Multiple sizes included
Some tools show surface discoloration
Tools are stored in a rectangular hinged case
Case has two metal latches on the front edge
Case interior has green felt lining with individual tool slots
External case surface is textured
Material of tools appears to be steel
Exact sizes and thread forms are not marked clearly in images
Brand and model are not identified in images
Power or drive system is manual via square or hex drive ends
Total quantity of tools is as shown in photos

Endress+Hauser Promag 10W25 Electromagnetic Flowmeter

Skylarc Ref A171092

Brand Endress+Hauser
Model Promag 10
Sensor type Promag W
Order code 10W25-UA0A1AA0A5AA
Serial number E91FBC19000
Flowmeter with integral transmitter and display
Power supply 11–40 VDC or 20–28 VAC
Power consumption 8 VA or 6 W
Output I-OUT HART and pulse-out
Ingress protection rating IP67
Enclosure type NEMA Type 4X
K-factor 0.7431 per unit as marked
Nominal diameter DN25
Flange rating DIN EN PN40
Maximum pressure PS up to 40 bar as marked
Ambient temperature range minus 20°C to plus 50°C
Stated calibration accuracy 0.5 percent CAL
Liner material PU
Electrode materials 1.4435 and 316L stainless steel
End connections are flanged
Unit has a cabled connection with exposed wire end as shown
Condition and operation not tested

Nordic Power Tools 9908 Corded Belt Sander

Skylarc Ref D171069

Brand: Nordic Power Tools
Model: 9908
Type: Corded belt sander
Supply voltage: 240V
Frequency: 50Hz
Rated power: 1200W
No-load speed: 480 m per min
Dust bag attached to sander
Power cord attached to sander
Includes one black plastic Nordic Power Tools carry case
Includes two carbon brushes as shown
Includes sanding belt marked G XK51 P120
Includes sanding belt marked KX167 A80

16x7.50-8 tyres and 16x6.50-8 tubes

Skylarc Ref I174298

Two tyres size 16x7.50-8
Tyre marking K-353
Tyre marking K-168-101MI
Six inner tubes size 16x6.50-8
All tyres and tubes are black rubber

Starrett 3089 Dial Gauge Indicator w/ Magnetic Stand

Skylarc Ref I173934

Starrett No.3089 Dial Gauge Indicator w/ Magnetic Stand.
Stand measures 230mm tall with 150mm arm.
Gauge not tested for accuracy.

Bosch Professional GLM 25 Laser Measure

Skylarc Ref V174285

Brand: Bosch
Model: GLM 25
Product type: Laser distance measurer
Series: Professional
Laser class: Class 2
Laser wavelength: 635 nm
Laser output power: <1 mW
Power supply requirement: 2 x 1.5V LR03 AAA batteries
Country of manufacture: Malaysia
Manufacturer: Robert Bosch Power Tools GmbH Germany
Backlit digital display
Single main control button on front
Included accessory: Bosch fabric belt pouch

Conair Bodybenefits Kinetics Percussive Massage Device CBKM001A

Skylarc Ref U174284

Brand: Conair
Series: Bodybenefits Kinetics
Type: Percussive massage device
Model: CBKM001A
Power input: 9V DC 1A
Power source: Li-ion rechargeable battery
Use with adaptor model CA91 only
Made in China
Device has rear power button with blue LED indicator
Includes three interchangeable massage heads as shown
Includes mains power adaptor as shown
Includes printed instruction manual for model CBKM001A
Includes black zippered carry case

18x Morse Taper No.3 Shank Drills, Metric & Imperial Sizes

Skylarc Ref D173929

18x Morse Taper No.3 Shank Drills.
All are of similar Metric or Imperial Sizes, examples being 63/64", 31/32", 15/16", 23.5mm, 24.5mm, 25mm, and other closely similar sizes. Some sizes have more than one units.
Conditions vary greatly as well as remaining Drill lengths.

42x Morse Taper Drills w/ No.2 & No.1 Shanks

Skylarc Ref C173928

42x Morse Taper Drills w/ No.2 & No.1 Shanks.
4x No.1 shank drills in sizes of 12.5mm, 14mm, 17/32", and the fourth one is illedgible.
38x No.2 shank drills in mixed Metric and Imperial sizes from 19/32" to 1 1/16" and 14.5mm to 22mm.
Condition and drill length vary greatly with each unit.

Assorted Lathe Turning Tools, Boring Bars, & More

Skylarc Ref B173927

Assorted Lathe Turning Tools, Boring Bars, & More.
Includes:
- Sandvik Coromant turning tool Part No. GTGPL 2525M 16.
- Second Tool borring bar Part No.S25S-CTFPR-16, 250mm length.
- Se o Tools Boring bar Part No.S20R-CTFPR-16, 200mm length.
- Seco Tools Boring bar Part No.S16Q-CTFPR-11, 180mm length.
- Unknown brand double ended Boring bar with Part No.2340-094, 14mm bar diameter, 170mm length, 19x19mm mounting block.
- Unknown brand Lathe Parting Tool with holder, Tool blade 150x30mm, mounting block 110x40x50mm.

Condition varies with each unit.

Stainless steel wash tank with mixer tap and drain valve

Skylarc Ref H174375

Stainless steel wash tank on four legs
Adjustable feet on each leg
Rectangular open top tank
Perforated stainless steel internal platform with handles
Side mounted mixer tap with hot and cold markings
Flexible metal hose connected to mixer tap
External stainless steel pipework along one side of tank
Bottom outlet with stainless steel ball valve
Outlet fitted with threaded connection
Two vertical support frames attached to tank sides
Label on tank side shows asset ID HMT4275
Wall mounted ECOCHEM Citrus Scrub dispenser attached to upper frame
Single central floor drain hole inside tank
Sink section approx 1000mm x 800mm x 600mm

4 Part Rolls of Electrical Wire

Audience

77

Bidders

9

$147

Sold 22/09/2025

Skylarc Ref N167616

Unknown lengths remaining.
See label photo for details.

Egger Type T 8-150 Pump with Motor Assembly

Audience

17

Bidders

4

$124

Sold 22/09/2025

Skylarc Ref S110228

Egger Type T 8-150 pump.
Serial number 92809.
Manufactured by Emile Egger & Co AG.
Tag indicates year of manufacture as 1994.
Stainless steel flanged fittings attached to pump.
Pump mounted on metal skid frame.
Electric motor included.
Motor housing shows severe corrosion and structural damage.
Wiring visible at motor terminal box.
Handwheel valve attached to output flange.
Output flange present on pump assembly.
Pump and motor mounted on pallet for handling.

Iconix LC44 Weighing Indicator, 30kg capacity

Skylarc Ref E173982

Iconix LC44 Weighing Indicator.
Measures approx 280x140x180mm.
Auction includes disolsy unit only, no Scale loadcell or platform included.
Unit powers on, not further tested. Some rusting to pc ports on back side.
See the manufacturer website below for further item specs:
https://www.iconix.co.nz/products/lc44

12x Metric Machine Taps by Alpha Gold

Skylarc Ref P173941

12x Metric Machine Taps by Alpha Gold.
Includes:
- 6x M20 x 2.5 Spiral point taps, 140mm lengths.
- 3x M16 x 2 spiral point taps, 110mm lengths.
- 3x M10 x 1.5 Spiral point taps, 100mm lengths.

All appear as new unused. Plastic case exteriors show storage wear.

WEG CFW-11 Vectrue Inverter

Skylarc Ref C174396

Brand WEG
Model CFW-11 Vectrue Inverter
Model number EUCFW110017T40FAZ
Material code 10574794
Serial number 1009685601
Date 04-11-2010
Input line voltage 380 to 480 VAC
Input phases 3
Input current ND 17 A
Input current HD 13.5 A
Input frequency 50 to 60 Hz
Output voltage 0 to line
Output phases 3
Output current ND 17 A
Output current HD 13.5 A to 20.3 A and 27 A stated
Output frequency range 0 to 300 Hz
Maximum ambient temperature 50 degrees Celsius
Weight 9.1 kg

WEG CFW-11 Vectrue Inverter

Skylarc Ref B174395

Brand WEG
Model CFW-11 Vectrue Inverter
Model number EUCFW110017T40FAZ
Material code 10574794
Serial number 1019560604
Input line voltage 380 to 480 V AC three phase
Input current 17 A nominal at 60 Hz for ND rating
Input current 13.5 A nominal at 60 Hz for HD rating
Output voltage 0 to line voltage three phase
Output current 17 A nominal for ND rating
Output current 18.7 A to 25.5 A for ND rating at 60 s to 10 s
Output current 13.5 A nominal for HD rating
Output current 20.3 A to 27 A for HD rating at 60 s to 10 s
Frequency range 0 to 300 Hz
Supply frequency 50 or 60 Hz
Maximum ambient temperature 50 degrees Celsius
Weight 9.1 kg

Industrial Workbench With Shelves And Drawers

Skylarc Ref P174383

Industrial workbench with upper shelving unit.
Workbench frame appears to be metal.
Worktop appears to be a solid panel with metal edge strip.
Upper unit has one large open bay on the left.
Upper unit has two shelves on the right.
Rear of upper unit is sheet plywood.
Bench front has two lower doors.
Doors open to reveal internal drawers and storage.
Left side has four internal drawers.
Right side has three internal drawers and one open compartment.
Drawer boxes appear to be timber.
Bench has four square-section legs.
There is a double power outlet mounted under the right upper shelf.

Pallet Racking

Skylarc Ref J174377

2 Uprights
3660mm x 910mm

6 crossbars
1370mm long

Some Cross bars need lugs adjusting / bent to attach

Industrial screw conveyor

Skylarc Ref F174373

Industrial screw conveyor assembly
Tubular housing with helical screw auger inside
Open inlet end with circular flanged opening and bolt holes
Opposite end closed with bolted end plate
Shaft drive end with projecting round steel shaft
Shaft features keyway and cross drilled hole
Flanged bearing housing mounted at drive end
Conveyor housing fitted with welded mounting brackets
Steel construction

OK Oil Filing Tank

Audience

72

Bidders

7

$119

Sold 27/07/2025

Skylarc Ref N167486

Type AC 5A

FAG X-Life 230mm dia Roller Bearing 23226, New

Skylarc Ref T152870

FAG X-Life 230mm dia Roller Bearing.
Type No. 23226-E1A-XL-M.
230mm diameter, 80mm wide, 130mm diameter centre hole.
New in manufacturer packaging.
https://www.bearingbasement.com/Mobile/en/ie/FAG-23226-E1A-XL-M-Spherical-Roller-Bearing-130x230x80mm/m-m-50122.aspx

11x Saiji Tablet / Phone Stands, Bulk Lot, New

Skylarc Ref W160358

11x Saiji Tablet / Phone Stands.
All are Model No. S1 Plus
Stand height up to 200mm.
Base diameter 105mm.
Max support weight 0.5kg
All are black colour.
New store retail stock in packaging.

Refrigerated Glass Canopy Ingredient Unit, shipping damaged

Skylarc Ref W162672

Refrigerated Glass Canopy Ingredient Unit.
Unknown brand.
Model No.VRX1800/380
Operating temperature 2⁰ to 8⁰C
Stainless steel body.
Glass cover.
Inner tray basin size 1450x305mm.
Condition - Factory plastic covering still partially on interior of basin. Inner basin shows no indications of usage. Glass covering Brackets are bent and twisted, see photos, though glass is not cracked or broken. Bending in steel panel near power cord. Powers on and seems to sound normal when running. Possibly an unused unit with shipping damage?

WEG 1.1kW Three Phase Electric Motor, Unused

Skylarc Ref R168322

Manufacturer WEG
Model W2000110B35
Power rating 1.1 kW
Voltage 220-240/380-415/440-460 V
Frequency 50 Hz
Mounting type B35R(E)
Protection degree IP66
Power supply three phase
Enclosure closed
Frame size 80
Frame material iron
High efficiency E3
Gross weight 18.573 kg
Colour RAL 6002
Date of manufacture 28 July 2014
Bearings 6204-ZZ and 6203-ZZ
Duty S1
Ambient temperature 40°C
200mm Diameter mounting bezel.
19mm Diameter shaft.
As new unused but removed from original box. Dusty from open box workshop storage.

Titan Ratchet Tie Down Assembly, 5000kg Capacity

Skylarc Ref X171661

Titan Ratchet Tie Down Assembly.
Part No.09570000
5000kg Capacity.
75mm x 10.5 metres.
New in sealed manufacturer bag.

Champion Assortment Roll Pins

Skylarc Ref H173803

Brand: Champion
Assortment number: CA 1421
Item type: Roll pins assortment
Manufacturer: Champion Parts Pty. Ltd.
Case material: Red plastic
Number of compartments in case: 15
Assortments on the lid

Starrett 660M Magnetic Base with Articulating Arm

Skylarc Ref J173805

Brand Starrett
Model 660M
Magnetic base with on off switch
Articulating indicator arm included
Clamp for indicator attachment on arm
Starrett branded red box included
Made by The L S Starrett Co Athol MA USA

Seco R220.53-080-12-8A Cutter on Tool Holder

Skylarc Ref W171062

Brand Seco
Model R220.53-080-12-8A
Marking MAX 14700 RPM
Marking SL 1204
Marking C04011-T15P
Marking T15P-4
Marking 4034856 001
Cutter is mounted on a steel tool holder
Multiple insert pockets are present on the cutter head
Shank is a tapered steel arbor

Marlco keyway broach set

Skylarc Ref X171063

Marlco keyway broach set in metal box.
Includes multiple circular bushings stamped Marlco.
Bushing sizes visible include 1 1/8 inch P.
Bushing sizes visible include 1 1/4 inch P.
Bushing sizes visible include 1 inch P.
Bushing sizes visible include 1/2 inch P.
Bushing sizes visible include 5/8 inch P.
Bushing sizes visible include 1 3/4 inch P.
Bushing sizes visible include 7/8 inch P.
Bushing sizes visible include 2 inch P.
Set includes multiple straight keyway broaches.
One broach is marked 5/16 inch Marlco.
One broach is marked 3/8 inch Marlco ESS.
One broach is marked 7/16 inch Marlco.
One broach is marked 1/2 inch Marlco ESS.
One broach is marked 9/16 inch Marlco.
Box has a wooden insert for holding bushings.
Metal box has hinged lid and front latch.

Tournmax ER32 Collet Set 3–20mm ISO30 ER32

Skylarc Ref Z171065

Brand: Tournmax
Type: ER32 collet set
Label states: Collet chuck ISO-30 ER-32
Label states: ER-32 collet 3-20mm set
Includes ER32 collets marked in 1mm steps from 3mm to 20mm
Individual collets visible include sizes 3mm 4mm 5mm 5-4mm 7mm 8mm 10mm 11mm 12mm 13mm 14mm 15mm 17mm 18mm 19mm 20mm
Collets are supplied in a grey plastic carry case
Some collets are wrapped in plastic film
Case has moulded internal insert for collet storage
Collets are metal ER32 spring collets
ISO30 ER32 collet chuck body is not present in the case

Titan Plate Lifting Clamp, 1-Ton capacity

Skylarc Ref J173987

Titan Plate Lifting Clamp.
1-Ton capacity.
20mm max material thickness.
Test tag expired 02/2023

2-Leg Lifting Chain Assembly, 2800kg max capacity

Skylarc Ref I173986

2-Leg Lifting Chain Assembly.
2800kg 2-leg, 2000kg single leg.
1.4-metre Chain length.
10mm Chain size.
105x70x15mm master link.
Certification tag expired 02/2023

2-Leg Lifting Chain Assembly, 2120kg max capacity

Skylarc Ref H173985

2-Leg Lifting Chain Assembly.
2120kg 2-leg, 1500kg single leg Capacity.
1.3-metre Chain length.
7mm Chain size.
170x115x15mm master link.
Certification tag expired 02/2023.

Marlco push broach and bush set

Skylarc Ref B171067

Brand Marlco.
Metal storage box with hinged lid and latch.
Set of round push broach bushes marked Marlco.
Bush sizes visible include
2 P.
2 3/8 P.
2 1/2 P.
2 3/4 P.
3 P.
3 1/4 P.
Two keyway push broaches marked 3 4 Marlco HSS.
One keyway push broach marked 5 8 Marlco HSS.
Several flat packing or shim pieces included.
All items are metal construction.
Items supplied as shown in the photos.

Ridgid 500B 1/4 to 1 Inch Bolt Die Head

Skylarc Ref C171068

Brand Ridgid
Model 500B
Marked 1/4 to 1 inch bolt
Marked bolt die
Die head with four numbered chasers 1 to 4 installed
Body shows casting marks and surface corrosion
Mechanical levers present on the body
Mounting ears with holes on the body
Marking change dies cast into the top section
Teeth on dies visible in central opening

PN New Zealand Tap and Die Set

Skylarc Ref E171070

Brand PN New Zealand
Tap and die set in metal case
Includes multiple circular threading dies
Includes square and round split die inserts
Includes die holders and collets as shown
Includes long handled adjustable die stock
Die stock has knurled steel handles
Metal storage case with two latches
Printed tap and die size chart inside lid
Condition consistent with visible wear and residue

ISO30 ER32 Collet Chuck Set 2–20mm

Skylarc Ref F171071

Collet chuck set
Label on case states ISO30 - ER32
Label on case states 2 - 20mm
Supplied by Drills Taps & Dies Ltd according to case label
Includes multiple ER32 collets shown in photos
Supplied in wooden storage case
Case has moulded insert for collet locations
Marking NT30 is handwritten on case exterior

Stronghold Stocks and Dies Set

Skylarc Ref G171072

Brand: Stronghold
Stocks and dies set in wooden case
Set includes multiple round threading dies
Set includes at least one split adjustable die
Set includes a stocks handle for holding dies
Set includes collets and die holders visible
Metal components show visible surface rust

Steel Workbench on Castors

Skylarc Ref H174063

Steel workbench with metal frame.
Blue and orange painted steel frame.
Rectangular steel top with timber backing under top.
Frame constructed from slotted steel uprights and cross braces.
Four swivel castors fitted to base.
Each castor has a foot-operated brake.
Castor wheels appear to be red plastic or rubber.
Castors are bolted to steel plates under each leg.
Top edges show welded or formed steel lip.
Some frame joints show welded connections.

Bosch Super D7BC Cu-Electrode Spark Plugs

Skylarc Ref J171075

Brand Bosch
Product Bosch Super spark plugs
Type Cu-Electrode
Model D7BC
Part number 0 241 335 516 - 740
Box label indicates 0.7 mm
Box label shows code 908
Manufactured in Brazil
Outer cardboard box present
Individual Bosch Super spark plug boxes

Bosch Super D6BC Cu-Electrode Spark Plugs

Skylarc Ref K171076

Brand: Bosch
Series: Super
Type: Cu-Electrode spark plug
Model code: D6BC
Bosch part number on box: 0 241 340 501 - 740
Electrode gap marking on box: 0.7 mm
Outer box quantity marking: 10
Individual spark plugs packaged in separate inner boxes

Mixed Spark Plug Lot

Skylarc Ref G171098

Mixed lot of spark plugs.
Includes loose used spark plugs in a blue plastic bin.
Loose plugs include Bosch brand units.
Loose plugs include NGK brand units.
Condition and compatibility of spark plugs are unknown.

Box of Bosch spark plugs

Skylarc Ref F171097

Mixed box of Bosch spark plugs.
Includes Bosch Platinum spark plugs.
Includes Bosch Super 4 spark plugs.
Quantity of individual plugs is not counted.
Spark plugs are in individual Bosch branded cardboard boxes.

Champion spark plugs assorted models

Skylarc Ref E171096

Assorted Champion spark plugs in original boxes
Some boxes labelled GOLD
Some boxes labelled COPPER PLUS
Visible model codes include RS9YX6
Visible model codes include S7YC
Visible model codes include 18 RV15YC4
Visible model codes include 400 RV9YC
Visible model codes include 71 RC12YC
Visible model codes include 841
Some individual plug packets show code AP8FS

Ingco FS3508 Finishing Sander

Skylarc Ref M171078

Brand: Ingco
Model: FS3508
Type: Finishing sander
Rated power input: 350W
Rated voltage: 220-240V 50Hz
No load speed: 6000-11000rpm
Sanding pad size: 230x115mm
Power source: mains corded
Plug type: three-pin angled flat blade
Variable speed control on front handle
On off switch located on top handle
Dust extraction outlet at rear of housing

Stayer SD/25 320W 220V die grinder

Skylarc Ref N171079

Brand Stayer
Model SD/25
Power rating 320W
Voltage rating 220V AC
Current rating 1.55A
Speed rating 25000 per minute
Red plastic body
Corded electric power tool
Plug shows surface wear
Power cord insulation damaged near tool end
On off switch located at rear of tool
Mounted with Garryson 80 abrasive flap wheel
Abrasive flap wheel shows visible wear
Overall condition shows visible wear and dirt

Makita 3620 Router

Skylarc Ref O171080

Brand: Makita
Model: 3620
Type: Electric router
Rated voltage: 230 V AC
Rated current: 3.9 A
Frequency: 50 to 60 Hz
Power input: 860 W
No load speed: 24000 per minute
Base plate installed

100mm Swivel Castor Wheels on Base Plates

Skylarc Ref P171081

Set of four castor wheels.
Wheel diameter 100mm.
Height from base plate to top of wheel 150mm.
Black wheel material.
Metal mounting base plate.
Base plate has four mounting holes.
Swivel mounting with central bearing race.
Each wheel mounted on a fixed fork bracket.
Fastened with hex head axle bolts and nuts.

Swordfish Machinery Key and Woodruff Key Assortments

Skylarc Ref Q171082

Brand Swordfish.
One 60 piece machinery key assortment.
Machinery key assortment model 31140.
Machinery key set contains 13 sizes.
Machinery keys supplied in plastic compartment case.
One 80 piece woodruff key assortment.
Woodruff key assortment model 31151.
Woodruff key set contains 8 sizes.
Both assortments made in China.

E clip and fibre washer assortments

Skylarc Ref S171084

Buy Right 300 piece E clip assortment in plastic case
E clip sizes and quantities shown on case insert
Synco fibre washer set in plastic case
Alltrade Trades Pro fibre washer assortment in plastic case
Trades Pro washer metric equivalents and quantities shown on insert
All three assortments are included in this listing
Plastic cases for each assortment are included
Actual piece counts have not been verified

Universal Series O-Ring Assortment 419 Piece Set

Skylarc Ref D171095

Universal Series O-Ring Assortment
ASTM D-2000 SAE J200
Material BUNA-N BG 715 nitrile 70 shore
Total 419 pieces stated on label
Includes part numbers R-01 to R-32
Inner diameter sizes from 3 mm to 50 mm stated on label
Section sizes from 1.5 mm to 3.5 mm stated on label
Red plastic storage case
Printed contents chart on case lid
Multiple O-rings stored on posts inside lid

Round Lifting Slings 2m 2000kg PES

Skylarc Ref C171094

Round lifting sling
Material grade PES
Effective length 2 metres
Working load limit 2000kg
Minimum proof load 39.2kN
Vertical WLL 2.0 tonne
Choke SWL 1.6 tonne
Basket SWL 4.0 tonne
30 degree SWL 3.8 tonne
60 degree SWL 3.4 tonne
90 degree SWL 2.8 tonne
120 degree SWL 2.0 tonne
Test method for round lifting sling to AS4497.1-1997

JBS Gen III Push Trolley 1 Tonne

Skylarc Ref V171087

Brand: JBS
Model: Gen III Push Trolley
Rated capacity: 1 tonne
Serial number: JBSZ160513
Part number: 0794 3359
Beam width range: 66mm to 188mm
Colour: red
Four trolley wheels
Manual screw adjustment with crank handle
Complies to AS1418.2
Packed for WIS Solutions P/L
Made for use on I beam or similar overhead beam systems

Metal C clamp 210mm opening

Skylarc Ref W171088

Metal C clamp
Clamp open width is 210mm
Screw type tightening mechanism
T-bar handle on screw
Fixed jaw and movable screw jaw
Painted surface with visible wear

Heavy duty C clamp 270mm opening

Skylarc Ref X171089

Heavy duty C clamp.
Maximum jaw opening approximately 270mm.
Steel frame with blue paint.
Steel threaded screw with sliding tommy bar handle.
Flat steel pressure pad at screw end.

Large metal C clamp 260mm opening

Skylarc Ref Y171090

Large metal C clamp.
Open width is 260mm.
Blue painted steel frame.
Steel threaded screw with T handle.
Square fixed anvil jaw.
Manual mechanical operation.

12 Ton Pipe Bender

Skylarc Ref Q174046

Pipe bender
Label states 12 ton capacity
Label states usage range 12 in 34 in 1 in 1 14 in 2 in

Not the original handle

16mm Keyless Drill Chuck w/ NT30 Mount

Skylarc Ref V173947

16mm JT6 Keyless Drill Chuck by Chum Power.
Chuck mount is a NT30-JT6 type, see photos.
Chuck jaws move smoothly.
190mm total tool length.

Bosch GWS 24-180 Angle Grinder

Skylarc Ref M174042

Brand: Bosch
Model: GWS 24-180
Type: Corded angle grinder
Side handle fitted
Disc fitted
Disc shows visible rust
Metal guard fitted around disc
Power cord attached
Plug type: Two flat angled pins with earth pin
Housing colour: Blue and grey
Label indicates 180 mm
On off switch on top of rear handle
Trigger lock button on side of handle

HSS Keyway Broach, D-10 size

Skylarc Ref U173946

HSS Keyway Broach, D-10 size.
10mm teeth width.
350mm length.

Record No 2 Bench Vice

Skylarc Ref L174041

Record No 2 bench vice.
Made in England marking on body.
Maximum jaw opening approximately 105mm.
Jaw width approximately 90mm.
Fixed base with mounting holes.
Steel jaws with flat gripping faces.
Lead screw operated by steel handle.

Hassay Savage 5/16" III Keyway Broach, 8mm

Skylarc Ref T173945

Hassay Savage 5/16" III Keyway Broach.
Part No.10320.
300mm length.
8mm wide teeth.

Mitutoyo Dial Travel Indicator 2414-08 w/ Magnetic Stand

Skylarc Ref R173943

Mitutoyo Dial Travel Indicator No.2414-08 w/ Magnetic Stand.
Stand 225mm tall with 140mm long arm.
Dial Indicator accuracy not tested.

Blackridge air hose with pressure gauge inflator

Skylarc Ref J174299

Brand: Blackridge.
Air hose with attached inflator gun.
Inflator gun has integrated pressure gauge.
Gauge marked in bar and psi.
Gauge outer scale shows 0 to 180 psi.
Gauge inner scale shows 0 to 12 bar.
Trigger operated inflator handle.
Hose material appears to be rubber.
Hose fitted with metal quick-connect coupling.
Hose fitted with multiple hose clamps.
Inflator end has metal tyre valve chuck.
Opposite end has male air fitting plug.
Rust visible on some metal fittings.

15x Assorted Taps, End Mills, Drills

Skylarc Ref O173940

15x Assorted Taps, End Mills, Drills.
Diameters range up to M32.
See photos for types included.
Condition varies with each unit.

Kralinator and Sakura oil filters mixed lot

Skylarc Ref H174297

Mixed lot of oil filters.
Brand Kralinator oil filter WF-1272K.
Kralinator WF-1272K canister marked L37.
WF-1272K box marked interchangeable with Z299.
Brand Kralinator oil filter WF-1168K.
Kralinator WF-1168K canister marked L130.
WF-1168K box marked interchangeable with Z139.
Brand Kralinator oil filter L130 in box labelled Z139 oil filter.
Brand Sakura oil filter C-1835.
Sakura C-1835 canister marked interchangeable with Z416.
Green metal canisters for Kralinator filters.
White metal canister for Sakura C-1835 filter.
Packaging shows product labels and part numbers.

Knight-Tile KP-21 Vinyl Planks

Skylarc Ref G174296

Brand: Knight-Tile
Product type: Vinyl planks
Design number: KP 21
Batch number: S08J002
Quantity in box: 36 planks
Plank dimensions: 914mm x 102mm x 2mm
Plank dimensions in inches: 36 inches x 4 inches x 1/12 inch
Packaging: Cardboard box
Wood-look pattern visible on planks

Knight-Tile KP-21 Vinyl Planks

Skylarc Ref F174295

Brand: Knight-Tile
Product type: Vinyl planks
Design number: KP 21
Batch number: S08J002
Quantity in box: 36 planks
Plank dimensions: 914mm x 102mm x 2mm
Plank dimensions in inches: 36 inches x 4 inches x 1/12 inch
Packaging: Cardboard box
Wood-look pattern visible on planks

Knight-Tile KP-21 Vinyl Planks

Skylarc Ref E174294

Brand: Knight-Tile
Product type: Vinyl planks
Design number: KP 21
Batch number: S08J002
Quantity in box: 36 planks
Plank dimensions: 914mm x 102mm x 2mm
Plank dimensions in inches: 36 inches x 4 inches x 1/12 inch
Packaging: Cardboard box
Wood-look pattern visible on planks

Knight-Tile KP-21 Vinyl Planks

Skylarc Ref D174293

Brand: Knight-Tile
Product type: Vinyl planks
Design number: KP 21
Batch number: S08J002
Quantity in box: 36 planks
Plank dimensions: 914mm x 102mm x 2mm
Plank dimensions in inches: 36 inches x 4 inches x 1/12 inch
Packaging: Cardboard box
Wood-look pattern visible on planks

Knight-Tile KP-21 Vinyl Planks

Skylarc Ref C174292

Brand: Knight-Tile
Product type: Vinyl planks
Design number: KP 21
Batch number: S08J002
Quantity in box: 36 planks
Plank dimensions: 914mm x 102mm x 2mm
Plank dimensions in inches: 36 inches x 4 inches x 1/12 inch
Packaging: Cardboard box
Wood-look pattern visible on planks

Knight-Tile KP-21 Vinyl Planks

Skylarc Ref B174291

Brand: Knight-Tile
Product type: Vinyl planks
Design number: KP 21
Batch number: S08J002
Quantity in box: 36 planks
Plank dimensions: 914mm x 102mm x 2mm
Plank dimensions in inches: 36 inches x 4 inches x 1/12 inch
Packaging: Cardboard box
Wood-look pattern visible on planks

Flexovit reinforced cut off wheels 230x2.5x22.2mm

Skylarc Ref A174290

Brand Flexovit
Type reinforced cut off wheel
Quantity 8 wheels
Diameter 230mm
Thickness 2.5mm
Bore 22.2mm
Max speed 6650 rpm
Marked for steel

Makita 5800NB 180mm Circular Saw

Skylarc Ref Y174288

Makita 180mm Circular Saw
Model 5800NB
Rated voltage 230V
Rated input 900W
Frequency 50 to 60Hz
No load speed 4500 per minute
Rated current 4.4A
Single phase corded power tool
Makita Electric Works Ltd Japan
Three pin power plug
Approximate power cable length 4 metres
Includes attached base plate
Serial number 105437E
Corded operation only

Makita HS7000 185mm Circular Saw

Skylarc Ref X174287

Brand: Makita
Model: HS7000
Type: 185mm corded circular saw
Blade diameter: 185mm
Blade marking: Makita D-51127B 185 x 1.8 x 20mm
Blade rating: Maximum speed 8300rpm
Blade application marking: For wood
Rated voltage: 230–240V AC
Rated frequency: 50–60Hz
Rated input power: 1200W
Rated current: 5.3A
No-load speed rating: 5200min-1
Power source: Mains power via cable
Plug type: Three-pin angled flat pin plug
Manufacturer: Makita Corporation
Country of manufacture: China
Color: Teal and grey housing with silver blade guard
Cord attached
Metal baseplate present

4x Live & Dead Lathe Centres

Skylarc Ref H173933

4x Live & Dead Lathe Centres.
Includes:
- 140mm diameter live centre with Morse No.2 shank.
- Live centre with 25mm live cone with Morse No.4 shank.
- Live centre with 32mm live cone with Morse No.4 shank.
- Dead centre with 24mm diameter cone, Morse No.3 shank.

All Live centres turn ok.

8x Assorted Morse Taper Drill Shank Sleeves & Adapters

Skylarc Ref G173932

8x Assorted Morse Taper Drill Shank Sleeves & Adapters.
Includes:
- 4x No.2 to No.3 Sleeves
- 1x No.1 to No.3 Sleeve.
- 1x No.3 to No.4 Sleeve.
- 1x No.3 to No.4 extended length Sleeve.
- 1x BT30 to No.3 adapter, Part number 7:24/30 MT3
- Tapered drill bit removal wedge tool.

General X5 Mk II Laser Level

Skylarc Ref T174283

Brand General X5 Mk II laser level
Class 2 laser product
Wavelength 630 to 685 nm
Maximum output less than 1 mW
Power supply 6 V from 4 x 1.5 V AA batteries
Made in China
Top controls labelled Pulse and Line
Side switch positions labelled On Lock and Off
Includes General X5 branded soft case
Includes Spot-on target plate with inch and centimetre scale
Includes black strap with plastic clips
Laser safety label present on base
CE mark on base
Model label number F4T76076 on base

Senco DS312-18V 18V Screwdriver

Skylarc Ref S174282

Brand: Senco
Model: DS312-18V
Type: Screwdriver
Rated voltage: 18.0V
No load speed: 0-2500 RPM
Power source: 18V Li-ion battery
Includes Senco 18V Li-ion screwdriver body
Includes two Senco 18V Li-ion battery packs
Includes Senco 18V Li-ion battery charger
Charger has mains power cord with plug
Includes red plastic carry case
Includes two square head rods
Includes bit holder with Phillips screwdriver bit

Mean Well PB-360P-12 Battery Charger

Skylarc Ref R174281

Brand: Mean Well
Model: PB-360P-12
Type: 3 stage switching mode battery charger
Isolated output
Suitable for lead-acid batteries
Input voltage: 100-120VAC 7A
Input voltage: 200-240VAC 3A
Input frequency: 50/60Hz
Output voltage: 14.4V
Output current: 24.3A
LED indication: red charging
LED indication: green battery full
Short circuit protection
Reverse polarity protection
Over temperature protection
Cooling fan with auto ON OFF control for PB-360 only
AC input via IEC socket
On off power switch on AC input side
Output connection via screw terminals marked plus and minus
Made in China
Indoor use only
Model code on label: PB-360P-12CDM

Ozito OSIK-30 30W Soldering Iron

Skylarc Ref Q174280

Brand: Ozito
Model: OSIK-30
Type: 30W soldering iron with stand
Input voltage: 230-240V
Frequency: 50Hz
Power rating: 30W
Maximum temperature: 380°C
Manufacture date code on handle: 2022/05
Three-pin mains plug fitted
Includes base unit with metal spring holder
Base unit has built-in metal tray on top
Base unit has rear pull-out plastic drawer
Drawer contains a plastic bag with multiple screw-on tips
Handle marking: Ozito OSIK-30 30W Soldering Iron
Made in China
Ozito Industries Pty Ltd branding on handle

4.10/3.50-4 Pneumatic Wheels with Brackets

Skylarc Ref O174278

Two pneumatic tyres marked 4.10/3.50-4
Tyres are tube type
Tyres have text Load Range T Max Inflation 30 PSI
Red plastic wheel hubs
Metal bearings fitted in wheel hubs
Two curved metal mounting arms included
Each mounting arm has a welded bracket with two clamp bolts
One small bag of bolts and nuts

Powerbuilt KSS015 socket set

Skylarc Ref N174277

Brand Powerbuilt
Model KSS015
Socket and ratchet set in black plastic carry case
Includes one ratchet handle marked Powerbuilt 54T
Includes multiple 12 point sockets in assorted sizes
Includes several extension bars
Includes one universal joint
Case has molded positions for individual socket sizes
Case has integrated carry handle
Latches are molded into the plastic case

CPS Pro-Set VP2DA 2 Stage Vacuum Pump

Skylarc Ref A174394

Brand CPS
Model VP2DA
Equipment type 2 stage vacuum pump
Labelled Pro-Set on housing
Rated flow 45 l per minute
Power source 240V AC 50Hz only
Rated power 300W
IP20 protection rating
Sound power level Lwa less than 70 dB A
Fitted with on off switch
Fitted with IEC mains inlet
Oil sight glass with MAX and MIN level markings
Includes CPS Pro-Set premium vacuum pump oil bottle as shown
Serial number J07 552948
CE marked

Workbench with Shelving and Drawers

Skylarc Ref R174385

Workbench with integrated upper shelving unit
Steel framed legs
Metal worktop surface
Upper unit has six open shelf compartments
Lower section has two front doors
Internal lower storage has multiple pull out drawers
Drawer interiors are timber
Back of unit is sheet plywood
Unit has a double power outlet on the upper left side

Some drawers hard to open

Enerpac hydraulic hand pump

Skylarc Ref O174382

Brand Enerpac
Hydraulic hand pump
Manual lever operated pump
Metal body with yellow paint
Base mounting feet with bolt holes
Oil fill plug at cylinder end
Flexible hydraulic hose attached
Quick connect hydraulic coupling on hose
Black plastic handle grip on lever

Enerpac Turbo Hydraulic Foot Pump

Skylarc Ref N174381

Brand Enerpac
Model Turbo
Foot operated hydraulic pump
Yellow metal pump body
Black metal foot pedal
Rubber handle grip on pedal end
Hydraulic hose attached to pump
Hydraulic quick connect coupling on hose
Air inlet fitting on pump body

NGK 7310 B6ES spark plugs

Skylarc Ref S174256

Brand: NGK
Model: B6ES
NGK stock number: 7310
Quantity: 5 spark plugs shown in boxes
Packaging: individual yellow NGK boxes
Spark plug type: B6ES as printed on each box

NGK DR8HS 5123 spark plugs

Skylarc Ref R174255

Brand NGK
Model DR8HS
Part number 5123
Quantity 5 individual spark plugs in boxes
Each spark plug supplied in NGK branded cardboard box

NGK 4730 DPR8Z spark plugs

Skylarc Ref Q174254

Brand: NGK
Model: DPR8Z
NGK stock number: 4730
Quantity: 12 spark plugs in boxes
Each spark plug is individually boxed
Colour of packaging: yellow and white with red NGK logo
Type: spark plug
Exact engine applications not confirmed

NGK 7422 BPR5ES spark plug

Skylarc Ref P174253

Brand NGK
Model BPR5ES
Part number 7422
Packaging shows NGK branding and spark plug

NGK CR7E 4578 spark plugs

Skylarc Ref O174252

Brand NGK
Model CR7E
Part number 4578
Seven individual boxed spark plugs

NGK DR7ES 3123 spark plugs

Skylarc Ref N174251

Brand: NGK
Model: DR7ES
Part number: 3123
Six individual spark plug boxes
Packaging is NGK yellow with spark plug graphic
Printing on boxes shows DR7ES 3123 NGK

NGK 4908 LMAR7A-9 spark plug

Skylarc Ref L174249

Brand NGK
Model number 4908
Type LMAR7A-9
Item is a spark plug in NGK branded box

NGK 95627 LMAR8G spark plugs

Skylarc Ref K174248

Brand NGK
Model LMAR8G
Part number 95627
Spark plug type as shown on NGK packaging

Elite Polaris 600NM Exercise Bike

Skylarc Ref G174374

Brand: Elite
Model: Polaris
Marked 600NM on frame
Stationary exercise bike
Flywheel drive system
Chain guard fitted
Handlebars with integrated display mount
Display console shows time speed distance and calories
Display console branded Elite
Saddle mounted on adjustable seat post
Pedals fitted with toe cages
Front stabiliser bar with transport wheels
Rear stabiliser bar with fixed feet
Frame finish in light colour with dark flywheel cover
Power or sensor cable from frame to console
Mechanical resistance control knob below handlebar stem

NGK DCPR8EKC 7168 spark plugs

Skylarc Ref J174247

Brand NGK
Model DCPR8EKC
Part number 7168
Quantity 6 spark plugs in individual boxes
Packaging shows NGK branding

NGK CR9EB 6955 spark plugs

Skylarc Ref I174246

Brand NGK
Model CR9EB
Part number 6955
Packaging is NGK branded cardboard boxes

NGK CPR7EA-9 3901 spark plugs

Skylarc Ref H174245

Brand NGK
Model CPR7EA-9
Part number 3901
Yellow and white NGK branded boxes

Assorted Motorcycle Spare Parts - New

Skylarc Ref K174352

Tech7 BP462 brake pedal.
X Tech universal clutch cable XTMA104 outer 1567mm cable 1757mm.
Tech7 Alloy Rim Lock 1.85 RLA185.
Alloy Rim Lock 1.60 part number 300.7310.
Talon 1.60 Rim Lock TALON1.60.
Rimlock 1.6 plastic MK20A part number 300.7140.
XTECH Deluxe oil measure jug 500ml XTMA501.
Alloy Rim Lock 2.50 part number 300.7325.
Tech7 Alloy Rim Lock 2.15 RLA215.
KiwiX chain adjuster Honda MC-03057.
Multiple items are in original packaging.
All items are sold together as one lot.

Assorted Motorcycle Sprockets - New

Skylarc Ref J174351

Part numbers in Photos

Assorted Motorcycle Sprockets - New

Skylarc Ref I174350

Part numbers in Photos

Assorted Motorcycle Sprockets - New

Skylarc Ref H174349

Part numbers in Photos

Assorted Motorcycle Sprockets - New

Skylarc Ref G174348

Part numbers in Photos

Assorted Motorcycle Sprockets - New

Skylarc Ref F174347

Part numbers in Photos

Motorcycle brake and clutch lever lot

Skylarc Ref E174346

Mixed lot of motorcycle brake and clutch levers
Brands visible include Whites Wirtz Motion Pro GYTR Kiwi-X and others
One Whites lever brake HON KTO part number L1BKT0
One Whites lever clutch HON CRF150 230 POL part number L1CKPS
One Whites lever clutch HON XR DLEG THICK POL part number L1CGM2C
One Motion Pro control lever labelled Honda XR brake
One Wirtz OEM brake lever for Kawasaki KX125-250 97 99 KX500 97 03 KX80-100 97 00 POLISH part number 105-002
One Wirtz brake lever KX125 250 500 97 99 RM part number 105002
One Wirtz clutch lever KTM all non hydraulic models POLISH part number 122-001
One Wirtz brake lever KTM 65 525 01 03 part number 102002
One GYTR pivot brake lever black part number GYT-1DX37-30-BK
One polished forged clutch lever Yamaha part number MX-08395
One Kiwi-X lever part number 004-3716B MC-08297SL

Motorcycle brake and clutch lever lot

Skylarc Ref D174345

See photos for part numbers.

Motorcycle brake and clutch lever lot

Skylarc Ref C174344

See photos for part numbers.

Motorcycle brake and clutch lever lot

Skylarc Ref B174343

See photos for part numbers.

Alpinestars Sequence Youth Kidney Belts and D3O Armour

Skylarc Ref V174337

Alpinestars Sequence Youth Kidney Belt model 6544619.
One Sequence Youth Kidney Belt size S/M black.
One Sequence Youth Kidney Belt size L/XL black.
Both kidney belts made in China.
Multiple orange D3O protective armour pieces included.
Orange armour pieces marked CE and UKCA.
Orange armour standard marking EN1621-1 2012.
Some orange armour pieces marked GHOST S/H.
Some orange armour pieces marked GHOST E/A.
One green protective armour piece included in plastic packaging.
One black fabric covered pad with hook and loop straps included.

Assorted Motorcycle spare parts

Skylarc Ref R174333

Assorted Motorcycle spare parts

Custom Desktop PC with AMD Processor, Windows 10, AOC Monitor

Skylarc Ref C165603

Custom Desktop PC.
Processor is AMD FX Series at 3300MHz, further model details unknown as BIOS does not display full processor details.
8Gb RAM in one DIMM.
500Gb Storage Disk drive, wiped of old user data.
Gigabyte Motherboard with AM3+ processor socket (cannot find Motherboard model number).
Microsoft Windies 10 Home reset for new user setup.
Optical disk drive.
500W Naxn branded power supply.
Includes AOC 22" LED Monitor model 12260S.
Includes 2x power cords and D-Sub video cable.
Keyboard and mouse NOT included.
Very dusty interior. Monitor shows dust and surface marks.

Lenovo ThinkCentre M Seties Desktop w/ Microsoft Windows 10 Pro + Monitor

Skylarc Ref P165122

Lenovo ThinkCentre M Seties Desktop.
Model.ThinkCentre M91p
Processor is Intel Core i5-2500 at 3.30GHz
12Gb RAM
246Gb AData 2.5" SSD SATA storage drive, wiped of old user data.
Microsoft Windiws 10 Pro reset for new user setup.
Optical disk drive.
Includes Viewsonic 22" LED Monitor model VA2248M-LED.
Includes D-sub video cable and 2x power cords.
Keyboard and mouse NOT included.

2x Glass Cutting Tools

Skylarc Ref Q171108

2x Glass Cutting Tools.
Smaller unit is a KStar EZY Cutter with 450mm wide cutting head and 1250mm long handle.
Larger unit is Glasscorp branded with 530mm wide head and 1900mm long handle.
See photos for cutting wheel angles, layout, etc.

Husqvarna 524L Petrol Line Trimmer

Skylarc Ref J172063

Husqvarna 524L Petrol Line Trimmer.
Manufactured in 2015.
Unable to get engune to start.

Electronic Cash Drawer

Skylarc Ref B172497

Electronic Cash Drawer.
Model No.CDDIEC410B.
Measures 410x415x110mm.
Key is missing.

Digital Platform Scale, 60kg max capacity

Skylarc Ref W174000

Digital Platform Scale.
Oharus branded.
Model No.CD-11
60kg max capacity.
Stainless steel platform 350x300mm and 95mm above floor.
AC power adapter canle is missing do we are unable to power on scale.
Operational condition is unknown. Dirty exterior surfaces.

AmPro 3/16" Air Hydraulic Riviter A3706

Skylarc Ref V173999

AmPro 3/16" Air Hydraulic Riviter.
Model No. A3706.
Shows mild usage.

AmPro Angle Head Reversable Air Drill A2432

Skylarc Ref U173998

AmPro Angle Head Reversable Air Drill.
Model No. A2432.
10mm keyed Jacobs chuck, key is missing.

AmPro 1/2" Drive Air Ratchet Wrench A4140

Skylarc Ref T173997

AmPro 1/2" Drive Air Ratchet Wrench.
Model No. A4140.
Operational condition is unknown.

Assorted Lefting Chains, Bow & D Shackles, Eyes, & More

Skylarc Ref F173983

Assorted Lefting Chains, Bow & D Shackles, Eyes, & More.
Includes:
- 1x 6.5-ton capacity D-shackle, BF07, 22mm.
- 1x 8.5-ton Capacity Bow shackle, BJ34, 26mm.
- 1x Tacoman wire rope clamp 12-14.
- 4x 1.2-ton capacity lifting eyes with M15 threads.
- 1x 250kg capacity lifting eyes with M10 threads.
- stainless steel Hook approx 100mm in length.
- 400mm long 7mm Chain.
- 2000mm long 7mm chain.
- 2x 500mm long 4mm chains.
- 1600mm long 3mm chain.
- 3000mm long 10mm chain with hook at one end.

Condition varies with each item.

16mm Keyless Drill Chuck w/ Morse Tapper No.3 Mount

Skylarc Ref J173935

16mm JT6 Keyless Drill Chuck.
Chum Power branded.
Made in Taiwan.
Morse Tapper No.3 mounting shank.
Jaws move smoothly.

4x Drills w/ Tapered No.4 Shanks

Skylarc Ref E173930

4x Drills w/ Tapered No.4 Shanks.
Includes:
- 45mm dia, 360mm length.
- 39.5mm dia, 345mm length.
- 35mm dia, 300mm length.
- 1 3/8" dia, 213mm length.

Condition and length remaining varies with each drill.

Mixed Cable and Wire Spools Lot

Audience

53

Bidders

8

$82

Sold 22/09/2025

Skylarc Ref W168301

Lot includes multiple cable and wire spools.
Aflex Cables 2x2x0.5mm² code HCP602 on blue spool.
One spool marked 4-core 0.2mm² cable.
Kacool Cable 2mm² brown cable on Powercentre Industries Ltd spool.
Dynamix C-RJ11 R102 spool with 100m 6 wire flat cable, colour black.
Spool marked C-RJ11-4 R103 with 100m 4 wire flat cable, white.
Spool labelled Homelan 1/51 2PR PAC PP PVC WHI, 100m white cable.
Maser labelled spool cat no B8134, 50m cable present.
Cable constructions visible in photos.
Copper conductors visible in most cables.
Insulation colours and core quantities visible for several cables.
Some spools partially used.

Ryobi 190mm Bandsaw

Skylarc Ref G171540

Ryobi 190mm 7.5 inch bandsaw
Cutting width 190mm
Table with grooved surface and integrated ruler markings
Adjustable fence attached to table
Blade guide assembly present
Electric motor mounted at the base
Power cord attached at rear
Metal housing construction
Upper and lower wheel assemblies visible
Standard bandsaw blade installed

Switch missing. Saw is on position and can be switch on at the wall.

Engineer Road Measure JN27-F Measuring Wheel

Skylarc Ref K173806

Engineer Road Measure JN27-F measuring wheel.
Mechanical counter display in metres.
Single large black wheel.
Foldable black handle with yellow grip.
Manual reset knob on counter unit.
Includes Trade Quip TQ measuring wheel bag.

AmPro Air Die Grinder A3033

Skylarc Ref S173996

AmPro Air Die Grinder.
Model No.A3033.
Tool is untested.

Utility trolley cart

Skylarc Ref J174065

Grey three tier utility trolley
Plastic construction
Two fixed rear wheels
Two front swivel castors
Lower shelf with raised edges
Middle shelf with raised edges
Upper removable tray with raised sides
Integrated push handles on upper frame
Multiple slots on upper frame for accessories or tools

Air Inline Needle Scaler

Skylarc Ref R173995

Air Inline Needle Scaler.
Unknown manufacturer and model.
350mm tool length.

Air Hammer Chisel by Powerdyne Pneumatic Tools

Skylarc Ref Q173994

Air Hammer Chisel by Powerdyne Pneumatic Tools.
Model.number unknown.
Tool is untested.

Puma Straight Air Drill

Skylarc Ref P173993

Puma Straight Air Drill.
Model No.AT-4038.
10mm Jacobs keyed chuck, key is missing.
Tool is untested.

Ingersol Rand 1/2" Drive Air Impact Wrench

Skylarc Ref O173992

Ingersol Rand 1/2" Drive Air Impact Wrench.
Unable to turn rusted socket head, operational condition of tool is unknown.

2x Long Arm Riveters

Skylarc Ref N173991

2x Long Arm Riveters.
The larger tool is a SRC model HR-730 riveter. 525mm tool length.
The smaller tool is of unknown brand/model and is approx 380mm long.

2x HIT Lazy Tong Pop Riveters HR-005

Skylarc Ref M173990

2x HIT Lazy Tong Pop Riveters HR-005.
Made in Japan.
Operational condition is unknown.
2x units in auction.

Lifting Chain Assembly, 2580kg capacity

Skylarc Ref G173984

Lifting Chain Assembly.
2580kg capacity..
3.6-metre Chain length.
10mm Chain size.
Certification tag expired 02/2023.

Assorted metal hand files

Skylarc Ref D174059

Files are various profiles including flat round half round and triangular
Files are various lengths from small to large
Two files have plastic handles
One handle is blue plastic
One handle is green plastic
Largest file length is approximately 500mm including handle

Bosch Super WR 9 HC Spark Plugs

Skylarc Ref I171074

Bosch Super spark plugs
Model WR 9 HC
Bosch part number 0 242 225 528
Cu electrode type
Stated electrode gap 0.9 mm
Marking on insulator SUPER R6 085
Made in Germany is stamped on metal body

Eureka 110 Piece Grease Nipple Assortment

Skylarc Ref R171083

Brand: Eureka
Assortments kit
110 piece grease nipple assortment
Plastic storage case
Includes 1/4"-28 straight grease nipples 30 pieces
Includes 1/4"-28 45° grease nipples 15 pieces
Includes 1/4"-28 90° grease nipples 15 pieces
Includes 1/8"-27 90° grease nipples 15 pieces
Includes 1/8"-27 45° grease nipples 15 pieces
Includes 1/8"-27 straight grease nipples 20 pieces

Orange chain block hoist with hook

Skylarc Ref C174058

Chain block hoist
Orange metal housing
Manual chain operation
Includes attached load chain
Includes hand chain
Identification plate present on top housing with worn markings
Top housing has suspension eye for hanging
Paint wear and surface rust visible on housing and chains
Brand and capacity not legible
Model number not legible

Cast iron angle plate

Skylarc Ref B174057

Cast iron angle plate
L shaped plate with vertical and horizontal faces
Four horizontal slots in total
Two slots on the vertical face
Two slots on the horizontal face
Three round through holes in the horizontal face

Mixed Drill Bits and Countersinks Lot

Skylarc Ref A174056

Mixed lot of drill bits and countersinks.
HSS centre drills in wooden blocks marked HSS CENTRE DRILLS.
Assorted twist drills with parallel shanks.
Assorted twist drills with taper

4 Organizer Cases and contents

Skylarc Ref Y174054

Various contents
Each approx 450mm x 320mm x 80mm

Hitachi G10SD1 100mm Disc Grinder

Skylarc Ref N174043

Brand Hitachi
Model G10SD1
Type 100mm disc grinder
Rated voltage 230V
Frequency 50 or 60Hz
Rated input power 550W
No load speed 11000rpm
Single phase
Made in Malaysia
On off switch on top of body
Side handle fitted
Guard fitted
Power cord with three pin plug
Section of power cord wrapped with blue tape and has possibly been damaged
Abrasive disc fitted
Green plastic housing

5mm Keyway Broach

Skylarc Ref S173944

5mm Keyway Broach.
HSS steel.
298mm long.

Stainless Steel Inset Sink Basin by Burns & Ferrall

Skylarc Ref M173938

Stainless Steel Inset Sink Basin by Burns & Ferrall.
Partial drain hardware attached.
Would benefit from a cleanup.

Sievert LPG torch with BOC 6000 regulator

Skylarc Ref Z174029

Sievert gas torch handle
Model on handle label appears as 2238
Torch head and lance attached to handle
BOC 6000 LPG regulator
Regulator outlet pressure marked 400 kPa
Pressure gauge attached to regulator
Flashback arrestor fitted at regulator outlet
Orange LPG hose connected between regulator and torch handle
Brass connector fitted to regulator inlet

CK Worldwide TL26FX TIG Torch Lead Set

Skylarc Ref Y174028

Brand CK Worldwide.
Model TL26FX marked on torch neck.
Air cooled TIG torch with flexible head.
Torch head fitted with brass gas or power fitting at front.
Handle includes on off switch assembly.
Lead set includes power cable.
Lead set includes gas hose.
Lead set includes control cable with multi pin plug.
Multi pin plug has 5 male pins.
Power end has brass DINSE style connector.
Leads enclosed in black fabric sheath.
Visible wear and dirt on sheath and torch body.
Overall length of leads not measured.

TBi Industries SR17F TIG Torch with Leads

Skylarc Ref X174001

Brand: TBi Industries.
Model marking on torch head: SR17F.
Torch type: TIG welding torch.
Handle is blue and black plastic with TBi Industries logo.
Supplied with attached power cable bundle.
Includes gas hose with brass fitting.
Includes control cable with metal connector.
Torch head fitted with pink ceramic gas nozzle marked 8.
Power connector is a male brass DINSE style plug with black rubber housing.
Outer cable bundle has black rubber sheath.

Fuller Pro Bench Vice 6 inch 150mm

Skylarc Ref Z174003

Brand Fuller Pro
Item Bench Vice
Jaw width 6 inch 150mm
Model number 455-3150
Heavy duty cast construction
Hardened polished replaceable jaws
Swivel base
Large anvil area
Metallic body with textured finish
Supplied in original Fuller Pro box
Plastic wrapping present on jaws and handle
Manual screw clamp operation

155mm 4-jaw Lathe Chuck

Skylarc Ref F173931

155mm 4-jaw Lathe Chuck.
Unknown manufacturer/model.
155mm diameter at jaws and 190mm diameter at mounting base, see photos.
3x 22mm diameter, 44mm long mounting pins spaced 115mm apart on centre.
Includes jaw key.
All jaws move at the same time.
Jaw mechanisms would benefit from a lubrication.

Siruba Portable Bag Closer

Skylarc Ref J174013

Brand Siruba
Type portable bag closer
Model AA
Manufacturer Kaulin Mfg Co Ltd
Machine number 861655
Electric motor fitted
Motor voltage rating 120V 240V AC
Motor frequency rating 50Hz 60Hz
Power cable attached
Top mounted plastic handle
Metal housing and components
Cord strain relief on handle
Trigger mechanism present near needle area
Needle area and presser foot assembly visible
Base plate designed for guiding bag material

Hush Paper Shredder

Skylarc Ref T174023

Brand: Hush.
Electric paper shredder.
Freestanding unit on four black metal legs.
Orange upper housing.
Top mounted rotary power switch.
Shredding mechanism uses interlocking metal cutters.

4 Arcsafe Welding Screens

Skylarc Ref L174015

3x C3
1x C5

Ridgid 410 Pipe Bender Head with Chain

Skylarc Ref F174399

Brand: Ridgid
Model: 410
Marking: 0 to 90 pipe
Body casting marked B-749
Includes handle
Includes chain
Made in U.S.A.
Patent information cast into body
Steel construction
Chain is attached to the bender head
Manual mechanical operation

Pentair Jung Pumpen U3 KS Submersible Pump

Skylarc Ref W174390

Brand: Pentair Jung Pumpen
Model: U 3 KS
Power supply: 230V single phase
Frequency: 50Hz
Current: 1.4A
Power rating: 320W
Protection class: IP68
Maximum head: 7m
Maximum flow rate: 6.5 m3 per hour
Maximum fluid temperature: 35°C
Manufactured in Germany
Includes attached float switch
Includes attached power cable
Includes metal outlet elbow fitting
Plastic housing with integrated handle

Enerpac RSM100 10 ton hydraulic cylinder

Skylarc Ref V174389

Brand Enerpac
Model RSM100
Hydraulic cylinder
Maximum pressure 10000 psi
Maximum pressure 700 bar
Capacity 10 ton
Marking A1015K on body

Enerpac RSM100 10 ton hydraulic cylinder

Skylarc Ref U174388

Brand Enerpac
Model RSM100
Hydraulic cylinder
Maximum pressure 10000 psi
Maximum pressure 700 bar
Capacity 10 ton

Enerpac RC10 hydraulic cylinder

Skylarc Ref T174387

Brand Enerpac
Model RC10
Hydraulic cylinder
Rated capacity 10 ton
Maximum pressure 10000 psi
Maximum pressure 700 bar
Single acting design
Spring return type
Fitted with hydraulic quick coupler

Durapac RHS-121 Hydraulic Cylinder

Skylarc Ref S174386

Brand: Durapac
Model: RHS-121
Capacity: 125 kN
Capacity: 12 ton
Stroke: 42 mm
Area: 17.9 cm²
Closed height: 120 mm
Maximum pressure: 700 bar
Weight: 2.8 kg
Serial number: 21052540
Fitted with Pioneer 3000 hydraulic coupler

Assorted Royal Enfield Motorcycle Spare Parts - New

Skylarc Ref A174342

See photos for Part numbers

Royal Enfield multifunctional headgear bundle

Skylarc Ref Z174341

Packaging illustrates multiple wear options including neckerchief mask balaclava full face balaclava pirate headband ear warmer hairband wristband and cap.
Original retail price labels show NZD 24.99 per unit.

Assorted Royal Enfield Motorcycle Spare Parts - New

Skylarc Ref Y174340

See photos for Part numbers

Assorted Royal Enfield Motorcycle Spare Parts - New

Skylarc Ref X174339

See photos for Part numbers

Assorted Royal Enfield Motorcycle Spare Parts - New

Skylarc Ref W174338

See photos for Part numbers

Motorcycle Accessories Bundle

Skylarc Ref U174336

Bundle of assorted motorcycle accessories.
Speedview Redraven Speedrolls Rolloff film 6 pack part 1002001.
Powerlock motorcycle tie downs TD151BB 1 1 2 inch x 6 ft black black.
Givi PDA holder for smartphones and GPS.
Hardline hour meter HR 8063 2 for gasoline engines.
Muc Off secure AirTag holder for powersports black.
Progrip 709 MX lock on grip system single color red.
VisorVision V Sponge visor cleaner pack.

5x Load Chain Binders

$72.75

Sold 03/02/2026

Skylarc Ref U173686

5x Load Chain Binders.
All are marked as 10,000 lbs max load rated.

AutoServ Comsumable Program Tank w/ Accessories & Case

Skylarc Ref J165116

AutoServ Comsumable Program Tank w/ Accessories & Case.
Unknown model number.
Unsure as to what these items are specifically for, see photos for further details on what is included.
Red air line is severely damaged and will need replacing. Unknown if any other falts with items.
Plastic Tool case measures 540x305x265mm

2x ViewSonic 22" LCD Monitors, no base stands

Skylarc Ref J166442

2x ViewSonic 22" LCD Monitors.
Both are Model No.VA2231wm
Both manufactured in 2011
Both include power cords.
Video Cables NOT included.
NOTE that Both these monitors are missing base stands! Buyer will need to source alternative methods of mounting these monitors.

Symphony Classic Chai Latte Drinking Powder, 64x 180g Cans

Skylarc Ref L173781

Symphony Classic Chai Latte Drinking Powder.
Auction includes 64x 180g cans.
Manufactured in New Zealand 28/05/2024
Best Before date of 28/05/2026.
8x cans per box, 8x boxes in auction, 64x 180g cans in total.
These are the very last boxes of manufacturer's stock, get them while you can!
See our other listings for more Bulk lots of this drinking powder in other flavors!

4x PVC True Union Ball Valves, 50mm size

Skylarc Ref L173989

4x PVC True Union Ball Valves.
All are 63-2", DN50 size.
All valves are new unused leftover factory parts stock, box exteriors show dust and storage wear.

Wynn's Diesel & Injection System Purge Fluids

Audience

45

Bidders

2

$61

Sold 13/04/2025

Skylarc Ref O162248

Wynn's Diesel & Injection System Purge Fluids.
Includes:
5x Wynn's Diesel System Purge Fluids, 1L full cans.
6x Wynn's Injection System Purge Fluids, in 1L partial used cans, amounts remaining in each can varies.
Dirty exteriors, appear to be older workshop stock.

MIG ARC Mild Steel Welding Wire, 1.0mm

Skylarc Ref A171742

MIG ARC Mild Steel Welding Wire.
1.0mm diameter wire.
15kg.
270mm diameter spool.
Spool still factory wrapped.
Box shows workshop storage wear.

Vintage or Antique Wooden Workshop Storage Cabinet

Skylarc Ref G173958

Vintage or Antique Wooden Workshop Storage Cabinet.
Age unknown.
Well used but mostly still sturdy

190mm 3-Jaw Lathe Chuck by Pratt

Skylarc Ref Q173942

190mm 3-Jaw Lathe Chuck by Pratt.
Made in England.
Type No.78.
190mm outer diameter.
60mm inner bore.
68mm thickness.
Jaw adjustment key is missing.

Knurling Tool Holder by Bayard

Skylarc Ref N173939

Knurling Tool Holder by Bayard.
Part No.MKT0174
Includes 2x spare Knurling wheels.
Shows mild usage.

Ridgid 11-R Thread Cutter w/ 3x Heads

Skylarc Ref L173937

Ridgid 11-R Thread Cutter.
Includes threading heads 3/8", 3/4", and 1 1/4".

Pipe Welding Vice by Reed

Skylarc Ref K173936

Pipe Welding Vice by Reed.
Model PWV461.
385mm length.
5mm chain size.

Stainless Steel Industrial Pump with 4-Pin Electrical Connector

Audience

15

Bidders

2

$54

Sold 22/09/2025

Skylarc Ref K109908

Stainless steel industrial pump housing.
Removable stainless steel pump head included.
Four-pin heavy duty industrial electrical connector attached.
Pump assembly is mounted on a pallet for transport.
Pump head has threaded input and output ports.
Control box located at rear of unit with mounting bolts visible.
Wiring and internal pump components visible through open access point on housing.
No manufacturer or model information visible.
Electrical cord exits from rear of unit.

Cubby Hole Unit

Audience

74

Bidders

5

$51

Sold 23/03/2025

Skylarc Ref Z165574

MDF construction

4x Desktop Monitor Stands, New Bulk Stock

Skylarc Ref O160142

4x Desktop Monitor Stands.
One is black and three are walnut and measure approx 520x240xl90mm.
13.5 kg max weight capacity.
All are new in manufacturer boxes.

Assortment of Mobile Phone Controller

Skylarc Ref M160634

Assorted Mobile Phone Controllers

50 iWatch Fashion Cases

Skylarc Ref G160602

41mm

6x Hoco Magnetic Wireless Charging Stations

Skylarc Ref M161544

6x Hoco Magnetic Wireless Charging Stations.
New unused store stock. Some denting to retail boxes.

Safertiser Kaha Sanitising Manuka Hand Creames, 100x Bottles

Audience

41

Bidders

7

$50

Sold 18/05/2025

Skylarc Ref G163436

Safertiser Kaha Sanitising Manuka Hand Creames.
Made in Christchurch, New Zealand.
Ingredients include Manuka Honey, Manuka oil, Macadamia oil, Jojoba oil, Vitamin E, and more, see photos.
100x 30mL pump Bottles in auction.
Best Before dates of 03/03/25.
New unused bulk box stock
See our other listings for more Bulk lots of this product.
Photos are indicative.
See the manufacturer website below for further product details:
https://www.safertiser.com/kaha-cream/

Vintage Steel Personnel Locker Converrted to Shelving Cabinet

Skylarc Ref A171170

Vintage Steel Personnel Locker Converrted to Shelving Cabinet.
Manufactured by Steelcase.
Two lockable doors, keys are missing
Dirty exterior surfaces but still sturdy older unit that would benefit from a cleanup.

Vintage Precision 3-Drawer Steel File Cabinet

Skylarc Ref B171171

Vintage Precision 3-Drawer Steel File Cabinet.
Lockable, key is missing.
Painted with a light beige body with light mint green drawer fronts and interiors.
Older heavier steel unit that has moderate finish wear but is still sturdy. Would benefit from a cleanup and re-finish making it a retro styled unit for your office.

Hitachi WH14DL Cordless Impact Driver

Skylarc Ref B172185

Model WH14DL.
Cordless impact driver.
Operates on 14.4V battery power.
Battery model BCL1430 is attached.
Battery specification is 14.4V 3.0Ah Li-ion.
Label indicates no more than 2050 impacts per minute.
Manufacturer is Hitachi Koki.
Equipped with wrist strap.
Control for light and hook is present on the base.

NO CHARGER - UNKNOWN IF THE BATTERY IS OK AS CURRENTLY FLAT

Ecochem Certain Sanitiser 20 Litre

Skylarc Ref L172403

Ecochem Certain Sanitiser for hands and surfaces
20 litres net
70 percent alcohol for fast sanitising
Highly flammable liquid and vapour
HSNO classification Flammable Liquids Category 2 and Skin Irritation Category 2
MPI approved for use in farm dairies C43 and CS6 for fish, meat and game
Read label and safety data sheet before use
Manufactured by Ecochem Ltd

Powerbuilt 107cm Professional Service Creeper

Skylarc Ref R174073

Brand: Powerbuilt
Model: 107cm Professional Service Creeper
Overall length 107cm as stated on label
Padded headrest section
Padded body support section
Steel tube frame construction
Six swivel castor wheels
Black vinyl covering on padding
Label attached to underside of creeper

7 Rolls of Tape 36mm x 1000m

Skylarc Ref Q174072

Item name: Tape 36mm x 1000m
Quantity: 7 pieces
Tape width: 36mm
Tape length: 1000m per roll
Colour: translucent yellow
Each roll is wrapped in clear plastic
Supplied in a cardboard box
Box dimensions: 27cm x 27cm x 28cm

A 36mm x 1000m tape is a large, industrial-sized roll of packaging tape, commonly clear or brown, used for sealing boxes, bundling items, and automated packaging machines.

7 Rolls of Tape 36mm x 1000m

Skylarc Ref P174071

Item name: Tape 36mm x 1000m
Quantity: 7 pieces
Tape width: 36mm
Tape length: 1000m per roll
Colour: translucent yellow
Each roll is wrapped in clear plastic
Supplied in a cardboard box
Box dimensions: 27cm x 27cm x 28cm

A 36mm x 1000m tape is a large, industrial-sized roll of packaging tape, commonly clear or brown, used for sealing boxes, bundling items, and automated packaging machines.

7 Rolls of Tape 36mm x 1000m

Skylarc Ref O174070

Item name: Tape 36mm x 1000m
Quantity: 7 pieces
Tape width: 36mm
Tape length: 1000m per roll
Colour: translucent yellow
Each roll is wrapped in clear plastic
Supplied in a cardboard box
Box dimensions: 27cm x 27cm x 28cm

A 36mm x 1000m tape is a large, industrial-sized roll of packaging tape, commonly clear or brown, used for sealing boxes, bundling items, and automated packaging machines.

7 Rolls of Tape 36mm x 1000m

Skylarc Ref N174069

Item name: Tape 36mm x 1000m
Quantity: 7 pieces
Tape width: 36mm
Tape length: 1000m per roll
Colour: translucent yellow
Each roll is wrapped in clear plastic
Supplied in a cardboard box
Box dimensions: 27cm x 27cm x 28cm

A 36mm x 1000m tape is a large, industrial-sized roll of packaging tape, commonly clear or brown, used for sealing boxes, bundling items, and automated packaging machines.

7 Rolls of Tape 36mm x 1000m

Skylarc Ref M174068

Item name: Tape 36mm x 1000m
Quantity: 7 pieces
Tape width: 36mm
Tape length: 1000m per roll
Colour: translucent yellow
Each roll is wrapped in clear plastic
Supplied in a cardboard box
Box dimensions: 27cm x 27cm x 28cm

A 36mm x 1000m tape is a large, industrial-sized roll of packaging tape, commonly clear or brown, used for sealing boxes, bundling items, and automated packaging machines.

7 Rolls of Tape 36mm x 1000m

Skylarc Ref L174067

Item name: Tape 36mm x 1000m
Quantity: 7 pieces
Tape width: 36mm
Tape length: 1000m per roll
Colour: translucent yellow
Each roll is wrapped in clear plastic
Supplied in a cardboard box
Box dimensions: 27cm x 27cm x 28cm

A 36mm x 1000m tape is a large, industrial-sized roll of packaging tape, commonly clear or brown, used for sealing boxes, bundling items, and automated packaging machines.

7 Rolls of Tape 36mm x 1000m

Skylarc Ref K174066

Item name: Tape 36mm x 1000m
Quantity: 7 pieces
Tape width: 36mm
Tape length: 1000m per roll
Colour: translucent yellow
Each roll is wrapped in clear plastic
Supplied in a cardboard box
Box dimensions: 27cm x 27cm x 28cm

A 36mm x 1000m tape is a large, industrial-sized roll of packaging tape, commonly clear or brown, used for sealing boxes, bundling items, and automated packaging machines.

Bosch Super H7 CC Spark Plugs

Skylarc Ref H171073

Brand Bosch
Model Super H7 CC
Bosch part number 0 241 235 638
Marked gap 0.9 mm
Cu electrode type indicated on box
Multiple individual boxed spark plugs shown
White ceramic insulator with green rings
Metal threaded body with single ground electrode
Top terminal shown as solid post type
Marking on insulator includes code 871

Assorted split pins and wire clips in plastic case

Skylarc Ref T171085

Assorted split pins in multiple sizes
Assorted wire clips in multiple sizes
Metallic finish on all pins and clips
Supplied in a clear plastic compartment case
Case has hinged clear plastic lid
Individual compartments separate different sizes and types
Quantity of items in each compartment varies
Exact sizes and counts unknown

HIT BC 900-H 900mm bolt cutters

Skylarc Ref X174053

Brand: HIT
Model: BC 900-H
Type: bolt cutters
Overall length 900mm
Jaw capacity 16mm 5/8 inch as marked on head
Adjustable cutting heads by cam bolt as per label
Handles are red
Cutting head is black
Jaws show visible wear and chipping on cutting edges
Markings on frame include 900 and 36"

Case with Fuses

Skylarc Ref W174052

Various amp fuses

Assorted hand tools lot

Skylarc Ref U174050

Assorted hand tools lot.

10 Litres Caltex Delo Gold Ultra SAE 15W-40 Diesel Engine Oil

Skylarc Ref V174051

Brand: Caltex
Product: Delo Gold Ultra
Viscosity grade: SAE 15W-40
Oil type: Multigrade
API rating: CI-4
Formulation: ISOSYN Technology
Application: Heavy duty diesel engine oil
Label text: Maximizes engine durability
Container size per unit: 5 litres
Number of containers : 2

DeWalt organiser with ferrules and Weidmüller crimping tool

Skylarc Ref T174049

DeWalt plastic organiser case with clear lid and yellow handle.
Organiser contains multiple removable yellow compartments.
Compartments are labelled for sizes 0.75mm 1mm 1.5mm 2.5mm 4mm and others.
Ferrules include single and twin types as indicated by labels.
Ferrules are assorted colours including grey yellow red blue black and white.
One compartment is labelled Crimpers.
A ratchet style crimping tool with blue handles is included.

Industrial plugs sockets and isolator bundle

Skylarc Ref R174047

Industrial plugs sockets and isolator bundle

Totem 30.5mm HSS Taper Shank Twist Drill

Skylarc Ref S174048

Brand Totem.
Type HSS taper shank twist drill.
Drill diameter 30.5mm.
Marking on shank reads Totem 30.5 HSS.
Shank is tapered.
Square tang drive end.
Includes red plastic storage case.
Label on case states HSS taper shank twist drill.

Castrol Techniclean AS 62 Hydrocarbon Solvent Cleaner 20L Drum

Skylarc Ref P174045

Brand Castrol
Product name Techniclean AS 62
Product type hydrocarbon solvent cleaner
Container type metal drum
Nominal volume 20 L
Primary ingredient naphtha petroleum hydrotreated heavy
Ingredient concentration 95 to 100 percent wwv

Castrol Radicool Concentrate 20L

Skylarc Ref O174044

Brand: Castrol
Product: Castrol Radicool Concentrate
Type: Engine coolant concentrate
Active ingredient: Ethylene glycol
Concentration: Contains 950 mL ethylene glycol per litre
Additive: Contains 10 mg per kg of bittering agent denatonium benzoate
Container volume: 20L
Container type: Metal drum with screw cap and carry handle on lid

Plastic Fuel Containers

Skylarc Ref K174300

Set of three plastic fuel containers
Two orange containers marked GASOLINE
Each orange container nominal capacity 1.25 US gallons
Each orange container nominal capacity 4.55 litres
Each orange container marked DANGER and gasoline safety warnings
All containers have screw caps visible in photos
All containers appear to be portable type fuel cans

Face shields

Skylarc Ref J174039

Lot of four face shields
One face shield has a black headband and clear visor
One face shield has a green headband and clear visor
One face shield has a yellow headband and clear visor
One face shield has a teal headband and clear visor
All headbands are adjustable via side knobs
Each shield has a transparent plastic visor
All units show visible dirt and marks on visors and headbands
Internal foam or fabric forehead pads are present on all units

4 face shields

Skylarc Ref I174038

Lot of 4 face shields.
Three face shields have black plastic headgear.
One face shield has blue plastic headgear.
One face shield has green plastic headgear with metal support band.
All face shields have clear plastic visors.
All face shields have foam forehead pads.
Headgear on three face shields includes adjustable strap systems.

Manual crimping tool 600

Skylarc Ref H174037

Manual crimping tool
Marking on head reads 600
Steel crimping jaws
Multiple crimping cavities in jaws
Bolt fastener through pivot of head
Red metal handles
Black plastic handle grips
Visible surface rust on jaws
Sticker with crimping size chart on one handle

Assorted Drill Bit Sets and Holders

Skylarc Ref G174036

Assorted drill bits and accessories.
Alpha SlimBox case included.
Red metal drill index box with metric markings.
Red box index markings include 10.5mm 11mm 11.5mm 12mm 12.5mm 13mm.
Multiple large HSS twist drills visible.
Some large drills marked HSS 10.50.
Several medium and small twist drills of various lengths.
Pack of small twist drills in clear plastic sleeve.
Two packets marked 1/8 10PCS containing small drills.
Yellow Starrett tube visible in SlimBox set.

Totem 19.5mm HSS taper shank twist drill

Skylarc Ref F174035

Brand Totem.
Type HSS taper shank twist drill.
Marked size 19.5 mm.
Material high speed steel HSS.
Taper shank with threaded end.
Marking on shank reads Totem 19.5 HSS.

BOC Argon Gas Regulator with Hose

Skylarc Ref E174034

BOC argon gas regulator
Dual pressure gauges fitted
Gauge faces marked BOC
Control knob labelled Argon
Body marked Max inlet pressure 28000 kPa at 15C
Regulator body material appears to be brass
Two gauge ports marked HP and LP on the body
Includes attached blue gas hose
Hose marked 08 16
One end of hose fitted with brass cylinder connection
Other end of hose fitted with blue quick connect fitting
Metal hose clip installed near quick connect fitting

Bearings

Skylarc Ref D174033

ID numbers in photos

2x FAG GG.P210-J7-HLV housings

Skylarc Ref C174032

Brand FAG
Model GG.P210-J7-HLV
Made in Vietnam
One housing unit per box

Weldwell Steadyflo Oxygen Regulator Model 8812C

Skylarc Ref B174031

Brand Weldwell
Model 8812C
Steadyflo oxygen regulator
Dual gauge configuration
Gauge scales marked in PSI and kPa
Maximum cylinder pressure gauge reads to 25000 kPa
Outlet pressure gauge reads to 1600 kPa
Regulator body marked Oxygen

Lenco Electrode Holder

Skylarc Ref A174030

LT 400

Makita NHP1310 Electric Drill

Skylarc Ref Y174002

Brand: Makita
Model: NHP1310
Type: corded electric drill
Rated voltage: 220-240V
Rated current: 6.2A
Frequency: 50-60Hz
Rated input power: 700W
No-load speed range low: 0-900rpm
No-load speed range high: 0-2900rpm
Has Lo and Hi mechanical speed selector
Made in Japan
Keyed drill chuck fitted
Chuck marking: 1.5-13
Body colour: blue plastic housing
Trigger switch on handle
Forward and reverse selector behind trigger
NO CHUCK KEY

Ridgid Universal Pipe Die Head

Skylarc Ref A174004

Brand: Ridgid
Type: Universal die head
Marking on body: RIDGID UNIVERSAL
Four numbered die positions marked 1 2 3 4
Lever marked OPEN and CLOSE
Change dies lever present
Marking on underside: 1/8 TO 2 PIPE
Die inserts fitted in all four positions

Mixed lot of metal storage hooks

Skylarc Ref Z174289

Total of 20 metal storage hooks
6 hooks approximately 100mm x 150mm
14 hooks approximately 130mm x 240mm
Hooks appear to be metal construction
Most hooks have blue coating on the hook section
Each hook has predrilled mounting holes on the arm
Some hooks show visible dirt and surface marks

ESAB Sentinel A50 Welding Helmet

Skylarc Ref B174005

Brand: ESAB
Model: Sentinel A50
Auto-darkening welding helmet
External shell color: black
Marking on side: SENTINEL A50
Flip-up front lens assembly
Clear outer protective lens installed
Internal auto-darkening filter assembly visible
Headgear with adjustable ratchet strap fitted
Inner forehead pad present
Control marking on side labeled GRIND
Display unit inside marked ESAB
CE marking visible on internal display unit

Elliotts Heatshield Blanket HSB66 1800mm x 1800mm

Skylarc Ref C174006

Brand Elliottts.
Model HSB66.
Product type heatshield blanket.
Size 1800mm x 1800mm.
Supplied in soft zippered pouch with clear plastic front.
Label text Heatshield Blanket HSB66 1800mm x 1800mm.

Mennekes 2177A to PDL 56PA432 32A power lead

Skylarc Ref D174007

Mennekes IEC connector Typ 2177A
Mennekes connector rating 32A
Mennekes connector voltage rating 380V to 440V
Mennekes connector configuration 3P+E
Mennekes connector frequency rating 50Hz to 60Hz
Mennekes connector protection rating IP67
PDL plug model 56PA432
PDL plug current rating 32A
PDL plug voltage rating 500V
PDL plug frequency rating 50Hz
PDL plug protection rating IP66
Lead fitted with flexible black cable
One end fitted with red and grey Mennekes connector
Other end fitted with orange and clear PDL 56 series plug
AC supply application
Industrial style power extension lead

Black and Decker KX1650A-XE Heat Gun

Skylarc Ref P174279

Brand: Black and Decker
Model: KX1650A-XE
Type: 1
Power rating: 1750W
Voltage rating: 230V AC
Frequency rating: 50Hz
Approximate weight: 0.9kg
Housing colour: orange with black nozzle
Two position rocker switch on handle
Corded design with attached power cable
Fitted with two flat pin plug suitable for AU NZ style outlets
Label states Made in China
Physical wear and dust visible on housing and cord

PDL 56P420 20A 500V IP66 Extension Lead

Skylarc Ref E174008

PDL 56P420 industrial extension lead plug end
Rated current 20A
Rated voltage 500V
Frequency 50Hz
Ingress protection rating IP66
Plug has 4 round pins plus earth configuration
Lead uses rubber insulated cable marked Flextex EPR H07RN-F
Cable has four conductors plus earth visible at cut end
One end of the cable is fitted with the PDL 56P420 plug
The opposite end of the cable is unterminated with exposed conductors

PDL 56 Series 20A and 16A Three Phase Outlet Box & Cable

Skylarc Ref W174026

PDL 56 Series three phase outlet box
Left outlet rating 20A 500V three phase 50Hz IP56
Left outlet catalog number 56SO520
Right outlet rating 16A 500V three phase 50Hz IP66
Right outlet catalog number 56SO516
Enclosure material plastic
Enclosure colour orange
Four core cable attached
Cable conductors exposed at one end
Cable gland fitted at enclosure entry point

Keystone F257 Pneumatic Actuator with Keystone F262 Valve

Skylarc Ref V174025

Brand Keystone
Model F257 pneumatic actuator
Model F262 valve body
Manufacturer Pentair
Actuator label shows year 2014
Valve label shows year 2017
Actuator has cylindrical body with end cap
Valve section is spherical with bolted flanges
Valve body marked Keystone F262
Unit includes threaded connections on valve body
Actuator has electrical or signal cable attached

Keystone F257 Pneumatic Actuator with Keystone F262 Valve

Skylarc Ref U174024

Brand Keystone
Model F257 pneumatic actuator
Model F262 valve body
Manufacturer Pentair
Actuator has cylindrical body with end cap
Valve section is spherical with bolted flanges
Valve body marked Keystone F262
Unit includes threaded connections on valve body
Actuator has electrical or signal cable attached

Shrinkfast Shrinkmaster Model 998 Heat Gun

Skylarc Ref F174009

Brand Shrinkfast
Model 998
Labelled Shrinkmaster on handle
Manufacturer Shrinkfast Marketing Newport NH USA
Power rating 168000 BTU per hour
Includes attached gas hose
Includes gas regulator with pressure gauge
Gauge marked in psi and kPa
Operating pressure label present but not fully legible
Serial number EO30343 on tool label
Black plastic body with yellow trigger handle
Metal burner head with perforated guard
Hose connected to tool with brass fitting
Regulator body is red with black adjustment knob

SEW Eurodrive CMP50S Motor with Tramec EP 75 Gearbox

Skylarc Ref G174010

Brand SEW-EURODRIVE
Model CMP50S/KY/RH1M/SM11
Three phase permanent magnet motor
Rated torque Mo 1.30 Nm
Rated current Io 0.96 A
Speed range 0 to 3000 rpm
Maximum current Imax 5.10 A
Supply voltage 400 V
Protection class IP65
Insulation class F
Mounting type IM B5
Motor weight 2.000 kg
Label states inverter duty only
Fitted with Tramec gearbox
Tramec model EP 75/1C 7 T/Q
Tramec code 2561835102 60N001
Motor has two circular multi pin connectors
Motor and gearbox are physically attached as one unit
Black motor housing with attached red gearbox housing
Output shaft visible on gearbox side

28 Flexovit Reinforced Cut Off Wheels 230x2.5x22.2mm

Skylarc Ref H174011

Brand Flexovit
28
Type Reinforced Cut Off Wheel
Application Steel
Dimensions 230x2.5x22.2mm
Maximum speed 80 m per s
Maximum speed 6650 rpm
Marking A36S BF41
Conforms to Australian Standard AS1788.1 1987 for cutting wheels
Central arbor hole diameter 22.2mm

Two Perforated Tilley Planks

Skylarc Ref I174012

Two perforated metal planks
Each plank has multiple rows of circular holes
Each plank has upturned sides forming a channel section
Ends of the planks are open channel
Side walls of each plank have elongated slots near the ends
Top surfaces have domed areas around each hole

KTN PVC Ball Valves

Skylarc Ref K174014

2x 1"
3x 1.25"
7x 1.5"

Some missing handles

NTN SNR ULTAGE 22320.EAW33 Bearing

Skylarc Ref N174017

Brand NTN SNR
Series ULTAGE
Model 22320.EAW33
Quantity 1
Made in Italy

Intech Instruments PT100A Temperature Probe

Skylarc Ref M174016

Manufacturer Intech Instruments Ltd
Model PT100A
Temperature sensor type PT100
Temperature rating 400
Label date 05 12 2018
Terminal head with screw connections
Probe body and stem appear to be metal construction
Chain attached to terminal head cap
Threaded process connection on probe
3 Terminal connection points inside head

ifm SI5000 Flow Monitor SID10ABFPKG/US

Skylarc Ref O174018

Brand: ifm electronic gmbh
Model: SI5000
Type: Flow monitor
Article: SID10ABFPKG/US
Protection rating: IP67
Supply voltage range: 19 to 36 V DC
Maximum output current: 250 mA SCP
Output function: programmable normally open or normally closed
Display: scale display with numeric setpoint scale 0 to 9
Function: flow monitoring with low and high flow indication
Electrical connection: threaded connector on housing front
Housing material: metallic body with orange sealing ring
Includes mounting fitting as shown
Includes printed operating instructions
Made in Germany

Wilden Pump

Skylarc Ref R174021

Brand: Wilden
Model: P.025 PZPPP TNL TF PTW
Item number on tag: 00-9616
Serial number: 0030936116
Kit: NAK NWK
Tag date: 2022-04-28
Manufacturer: Wilden Pump & Engineering
Assembled in the USA
CE marked
Pump body appears to be plastic
Metal clamp bands on pump chambers
Temperature limitations label attached on side
Inlet and outlet ports on top of pump

Pair of red steel magnetic welding holders

Skylarc Ref Q174020

Quantity: 2 units
Each unit is a red steel plate welded to a black steel body
Each unit has a central circular hole
Each unit is fastened with five visible metal rivets
Approximate shape is arrowhead or chevron with flat top

FineTek SF1800 Flow Switch

Skylarc Ref E174398

Brand: FineTek
Model: SF1800
Device type: Flow switch
Protection rating: IP65
Thread connection: 1 inch PT screw
Temperature range: minus 40°C to plus 150°C
Contact rating: 1A 30W 220VAC
Contact type: SPDT
Contact terminals marked COM NO NC
Electrical rating: 220VAC 200VDC
Serial number: 6GAU06060213
Body material appears metallic
Unit includes paddle type flow sensor
Flow direction indicated by arrow on body
Markings include CE symbol
Wiring terminals located under removable top cover

Danfoss VLT 2800 Variable Frequency Drive

Skylarc Ref D174397

Brand Danfoss
Model VLT 2800
Type code VLT2807PT4B20STR1DBF00A00
Part number 195N1015
Serial number 069816G103
Input rating 3x380-480V 50/60Hz 1.9A
Phase to ground maximum 300V
Output rating 3x0-Uin 0-1000Hz 2.1A 1.7kVA
Chassis rating IP20
Maximum ambient temperature 45C or 113F
Made in Denmark
Front panel with display and keypad
Keypad buttons labeled Quick Menu Change Data Start Stop Reset and navigation keys
Terminal markings L1 L2 L3 and U V W
Cooling fan on rear panel

Secure A Load 7-8mm Lever Type Loadbinder

Skylarc Ref Z174393

Brand Secure A Load.
7-8 mm Lever Type Loadbinder.
Batch number P0019080.
Grade 70 chain rated.
Suitable for 7 mm and 8 mm chain.
Lashing capacity 3800 kg for 7-8 mm chain.
Marked M.B.S. 8 mm 7600 kgs.
Complies to AS/NZS 4344:2001.
Orange painted finish.
Two grab hooks fitted.
Lever type tightening mechanism.

Robus LED Floodlight

Skylarc Ref Y174392

Brand: Robus
Product code: RP50LEDF45-04
Type: LED floodlight
Input voltage: 220-240V AC
Frequency: 50-60Hz
Total power: 50W
Correlated colour temperature: 4500K
Ingress protection rating: IP65
Fitted with three pin mains plug
Power cable attached to light housing
Label shows CE marking
Housing is black
Front lens is rectangular
Back of housing has multiple cooling fins
Light is shown powered on in photo

NO MOUNTING BRACKET ATTACHED

Red steel lifting clamp pair 500kg

Skylarc Ref X174391

Red painted steel lifting clamp arms
Two clamp arms included
Each arm has a round eye at one end
Each arm has a hook profile at the opposite end
Hooks have welded flat contact plates
Arms are joined by pinned pivots
Warning plate states Maximum Load 500kgs
Construction appears to be welded steel plate

Three 4 Drawer Filing Cabinets

Skylarc Ref I174376

NO KEYS

Motorcycle visor cleaners grips and exhaust plugs

Skylarc Ref T174335

Motorcycle visor cleaners grips and exhaust plugs

Motorcycle Headgear

Skylarc Ref S174334

Royal Enfield, Oxford, Whites

Snap Fitness 37.5KG Dumbbells

$47

Sold 02/08/2021

Skylarc Ref U126085

Snap Fitness 37.5KG Dumbbells.
Very used condition.

Metal Wire Storage Shelf Rack

$45

Sold 30/11/2025

Skylarc Ref N172457

Metal wire shelving unit
Nine shelves
Open wire construction
Rectangular frame
Each shelf has raised edges on all sides
Metallic finish
Freestanding design
Suitable for general storage purposes

15x Assorted Automotive Phone Holders / Chargers

Skylarc Ref Z160335

15x Assorted Automotive Phone Holders / Chargers.
Includes:
- 12x Borofone H49 Rearview mirror mounted phone holders
- 3x Remax automotive 15W wireless phone charger/holders RM-C61.

All are new store stock in packaging.

Alltrade Soldering Gun Set

Skylarc Ref Q172200

Alltrade soldering gun set.
Model TQ1000.
Rated at 100 watts.
Rated for 240V 50Hz power supply.
Set includes soldering gun and multiple interchangeable tips.
Plastic carry case included.
Case contains three yellow-handled tools.
Soldering wire tube included in the set.

Assorted Electrical Connectors and Terminals

Skylarc Ref K174040

Assorted electrical connectors and terminals in multiple plastic boxes
Includes grey insulated pin terminals in a clear plastic box
Includes white insulated pin terminals in a clear plastic box
Includes blue insulated crimp connectors in a clear plastic box
Includes red insulated crimp connectors in a clear plastic box
Includes yellow insulated crimp connectors in a clear plastic box
Includes mixed heatshrink tubing in compartment boxes
Includes clear plastic screw terminal

Water line Shut Off Valve

Audience

39

Bidders

3

$35

Sold 18/08/2024

Skylarc Ref O155696

Approx 100mm internal diameter

Esko Centurion Safety Helmets

Skylarc Ref X174027

Brand Esko Centurion
Two safety helmets
Colour white
Plastic outer shells
Internal suspension harnesses fitted in both helmets
Adjustable straps inside both helmets
Rear ventilation slots on both helmets
Esko and Centurion branding labels on rear of both helmets
Visible external scuffing and dirt on shells
Visible wear and dirt on internal harnesses
Size markings not identified