SKYLARC’S SURPLUS MACHINERY AUCTION

Dener DMP-CNC 40-15 Press Brake

Skylarc Ref W175898

Brand: Dener
Model: DMP-CNC 40-15
Type: CNC press brake
Bending force: 40 ton
Bending length: 1550 mm
Motor power: 11 kW
Maximum pressure: 280 bar
Oil tank capacity: 100 L
Weight: 3500 kg
Production date: 2012
Controller brand: Delem
Controller model: DA-66T
Machine marking: 1500 x 40 CNC Puma
Red mesh perimeter guarding fitted
Light guards
Foot pedal control
Assorted press brake tooling shown
Serial number: 30415 27204
Made in Turkey
Tidy little machine

Finn-Power CNC Turret Punch

Skylarc Ref X175899

Manufacturer: Finn-Power
Machine model: TP2525IF2/21AM
Serial number: 7.8-252514693
Manufacturing year: 1993
Supply voltage: 3 phase 380 V 50 Hz
Power rating: 40 kVA
Maximum press force: 300 kN
Machine weight: 10600 kg
Control system: GE Fanuc Series 0-P
Turret style punch press
Includes Finn-Power operator console
Includes separate Finn-Power pedestal control station with emergency stop and pushbuttons
Worktable with integrated ball transfer surfaces
Linear positioning system with scale marked to at least 2000 mm
Assorted turret punch tooling is visible in racks and drawers in the photos
Manufacturer location on nameplate: Lillbacka Konepaja FIN-62200 Kauhava Finland
Video machine is running half speed
You will need your own lifting machinery to load this machine

Three Phase Surface Grinder

Skylarc Ref Y175900

Surface grinding machine
Magnetic table dimensions 600mm x 200mm
Approximate table travel 500mm
Grinding wheel diameter 200mm
Electromagnetic chuck fitted to table
Machine is floor mounted
Handwheel controls for table and head movement
Hydraulic pump
Coolant pump

Ward Capstan Lathe

Skylarc Ref V175897

Ward capstan lathe
Three phase
Spindle speeds 55 -:1650rom
Capstan style 6 station turret head
Lever operated carriage controls
Cross slide and compound slide fitted
Lathe bed with longitudinal rack drive
Spindle nose with collet type chuck
Gearbox feed chart showing inch and metric feeds
Feed chart ranges noted from 0.002 in to 0.008 in per rev
Feed chart ranges noted from 0.05 mm to 0.19 mm per rev
Lathe bed casting marked with raised number 3
Lathe mounted on integral cast iron base
Coolant tray integrated into base
Electrical control panel with push buttons on headstock
Large handwheel tailstock assembly on bed
Four station square toolpost on carriage
Machine appears to be configured for bar work
Power leadscrew and feed shaft visible under the bed

Amada Pega Coma Vela Vipros pneumatic clamp

Skylarc Ref S175244

Amada pneumatic clamp.
Suitable for Pega Coma Vela Vipros punch presses.
Steel construction.
Includes clamp body and integrated pneumatic components as shown.
Fittings and gears visible on the clamp top.
Condition and completeness as shown in photos.

Amada Pega Coma Vela Vipros pneumatic clamp

Skylarc Ref R175243

Amada pneumatic clamp.
Suitable for Pega Coma Vela Vipros punch presses.
Steel construction.
Includes clamp body and integrated pneumatic components as shown.
Fittings and gears visible on the clamp top.
Condition and completeness as shown in photos.

Amada Pega Coma Vela Vipros pneumatic clamp

Skylarc Ref Q175242

Amada pneumatic clamp.
Suitable for Pega Coma Vela Vipros punch presses.
Steel construction.
Includes clamp body and integrated pneumatic components as shown.
Fittings and gears visible on the clamp top.
Condition and completeness as shown in photos.

320mm Rotary Milling Table

Skylarc Ref W175430

320mm Rotary Milling Table.
Made in China in 1989.
Mounting slots spaced approx 390mm appart.
Table rotates smoothly.

Solid Copper Cylinders 50mm Diameter

Skylarc Ref N175239

Two solid copper cylinders.
One cylinder length approximately 800mm.
Second cylinder length approximately 1100mm.
Both cylinders diameter approximately 50mm.
Both cylinders appear solid along their length.
Each cylinder has cross drilled holes near at least one end.
One cylinder has multiple round holes near one end.
One cylinder has a steel lever arm assembly bolted to one end.
Lever arm assembly includes a threaded copper roller or bush.
Ends of both cylinders are flat faced.
Surface marks and wear are visible on both cylinders.

Topward DC Power Supply 33006D

Skylarc Ref K175782

Topward DC Power Supply.
Model No.33006D.
350x230x150mm.
Includes power cord, user manual, black/red probes, original box
Item appears as new unused.
Powred on only, not further tested.

Topward DC Power Supply 33006D, Damaged Terminals

Skylarc Ref J175781

Topward DC Power Supply.
Model No.33006D.
350x230x150mm.
Includes power cord, original box
NOTE that the black and red terminals have been torn off, will need repair. Otherwise the unit is in very good overall condition.
Powred on only, not further tested.

Vintage 250mm Rotary Milling Table

Skylarc Ref X175431

Vintage 250mm Rotary Milling Table.
Manufactured in Russia in 1972.
Mounting bolt slots spaced apart from approx 235mm to 350mm.
Table turns but is a bit stiff when turning handle, may benefit from a lubrication.

Vintage Electromagnetic Amperes AC Test Set by H.W. Sullivan

Skylarc Ref I175442

Vintage Electromagnetic Amperes AC Test Set.
Model No.75174.
Manufactured by H.W. Sullivan Ltd.
Hardwood enclosure 260x190x330mm fitted with brass screws.

Steel and Tube 4 Leg 10mm Lifting Chain Sling

Skylarc Ref A175252

Brand Steel and Tube
Configuration 4 leg chain sling
Chain size 10mm
Approximate chain length 3.2m
Hook markings ITALY 10-8
Working load limit single leg 2520kg
Tag shows expiry date 02-2025
Tag shows cert number TWS 71
Construction alloy steel chain with grab hooks
Includes master link
Information based on markings visible on tags and components

Master 1 Ton Chain Hoist

Skylarc Ref Z175251

Master 1 Ton Chain Hoist
3 metres

Steel lifting chains with master links

Skylarc Ref Y175250

Steel and Tube tagged lifting chain set
Tag brand Steel and Tube
Expiry date on tag 02 2025
Working load limit single leg 2000 kg
Tag shows certificate number TWS 12
Tag shows size 8 mm
Tag shows length 1.4 m
Yellow painted master link assembly with attached chain as shown
Additional heavy steel chain approx 2 m long measured in photo
Large link chain shown without tag
Set includes multiple oval master links red and yellow painted
All items are steel chains with welded links
Exact grades and standards not stated on tags or chain
Only details visible on tags and tape measure have been listed
Condition of chains and fittings as visible in photos

Jetfire J45A LPG Industrial Gas-Fired Air Heater

Skylarc Ref X175249

Brand: Jetfire
Model: J45A
Type: Mobile industrial direct gas-fired air heater
Fuel type: Propane gas
Minimum room volume: 900 m3
Minimum clearance to combustible materials: 900 mm
Fuel pressure regulator: 100 to 200 kPa
Fuel pressure burner: 100 to 200 kPa
Minimum gas consumption: 1.8 kg per hour
Maximum gas consumption: 3.6 kg per hour
Air flow: 362 litres per second
Limit thermostat: 110 degrees Celsius plus or minus 5 degrees Celsius
Electric supply: 220 to 240 volts
Frequency: 50 to 60 Hz
Electric motor power: 110 watts
Electric motor speed: 1300 rpm
Electric motor current: 0.82 A
Jet size: 1.3 mm
Heat input: 95 to 190 MJ per hour
Air proving switch setting: 20 g
Power plug type: three pin
Made by Spitwater Australia Pty Ltd Albury NSW
For industrial use only
Use only in a well ventilated space
Use only with LPG as specified on the heater
Mounted on wheeled frame with handle
Color: red with black frame

Jetfire J25/A mobile industrial direct gas-fired air heater

Skylarc Ref W175248

Brand Jetfire
Model J25/A
Mobile industrial direct gas-fired air heater
Fuel type propane
Minimum room volume 500 m3
Minimum gas consumption 1.4 kg/h
Maximum gas consumption 2.0 kg/h
Fuel pressure regulator 150 kPa
Fuel pressure burner 150 kPa
Jet size 1.15 mm
Heat input 101 MJ/h
Air flow 195 l/s
Limit thermostat 110 ± 5°C
Electric supply 240 V 50 Hz single phase
Electric motor rating 100 W
Electric motor speed 1300 rpm
Electric motor current 0.75 A
Serial number 04H029923
Stock number SP101
Made by Spitwater Australia Pty Ltd Albury NSW
Three-pin mains plug fitted
Gas hose with valve assembly fitted
Heater is approved for industrial use only
Use only in a well ventilated space
Minimum clearance to combustible materials 900 mm

Welding Screens and Fire Blankets

Skylarc Ref V175247

6 x welding Screens
2 x fire blankets

Steel and Tube chain sling 2000kg single leg

Skylarc Ref U175246

Brand Steel and Tube chain sling.
Single leg chain sling.
Working Load Limit single leg 2000 kg.
Tag shows expiry date 02 2025.
Certificate number on tag TWS 13.
Tag indicates size 8 mm.
Tag indicates length 1.4 something metres handwritten and partly unclear.
Includes two large yellow oval master links marked Yoke.
Steel chain construction.

Lathe Faceplates and Mounting Hardware

Skylarc Ref T175245

Large round steel faceplate with radial T slots
Large faceplate outside diameter approximately 300mm
Large faceplate centre hole present
Large faceplate fitted with four radial steel clamping straps
Each clamping strap on large faceplate has a slotted mounting hole
Each clamping strap on large faceplate has a hex head stud and spacer
Smaller round steel faceplate with three mounting holes
Smaller faceplate outside diameter approximately 200mm
Smaller faceplate has a centre hole
One steel mounting arm with two ball bearing rollers
Cast iron backing plate shown behind smaller and larger faceplates
Tape measure in images used for size reference only

Pratt Burnerd 4-Jaw 200mm Lathe Chuck

Skylarc Ref A175434

Pratt Burnerd 4-Jaw 200mm Lathe Chuck.
Cat No.1500-02001.
Made in England.
Independently movable jaws.
Includes jaw key.
200mm outer diameter.
48mm inner bore.
90mm thickness.
Three mounting pins 15mm diameter and spaced 70mm appart on centre.
Jaws move smoothly but not tested under load

Pratt Burnerd 4-Jaw 200mm Lathe Chuck

Skylarc Ref Y175432

Pratt Burnerd 4-Jaw 200mm Lathe Chuck.
Type No.1935.
Made in England.
200mm outer diameter.
50mm inner bore.
80mm thickness.
No mounting pins, three threaded holes for pins spaced 100mm apart on centre.
Jaw key is missing.

Taifu JET60 Water Pump

Skylarc Ref P175241

Brand Taifu
Model JET60
Water pump
Qmax 55 l per min
Suction Hmax 9 m
Hmax 28 m
Voltage 230 V
Frequency 50 Hz
Power 0.37 kW
Power 0.5 HP
Current 1.6 A
Capacitor 12 µF
Insulation class F
IP54 rating
Continuous duty
Thermal protector yes
Single phase motor
Approximate speed 2850 min-1 as per label
CE ISO9001 marking on label
Three pin plug fitted
AC mains powered
Green metal pump housing
Black plastic motor cover
Serial or batch number 20062200401 on label

Universal Dividing Head Assembly

Skylarc Ref V175429

Universal Dividing Head Assembly.
Made in China in 1969.
200mm Diameter Chuck.
Includes tailstock unit and two mounting rails.

Steel circular plates with bolt holes

Skylarc Ref O175240

Two steel circular plates
Each plate is approximately 340mm diameter
Each plate is approximately 20mm thick
Each plate has a circular pattern of bolt holes near the outer edge
Plates appear to be solid steel
Surfaces show machining marks
Some surfaces show visible rust
Quantity in this listing is two plates

Bremick M24 x 75mm Class 8.8 Hex Bolts and Nuts

Skylarc Ref M175238

Brand Bremick
Type Class 8.8 hex bolts and nuts
Thread type Metric thread
Bolt size M24 x 75mm
Finish Zinc plated CR 3 plus
Packaging label states 5 pieces net per box
Multiple boxes shown in images

Bremick M24 x 75mm Class 8.8 Hex Bolts and Nuts

Skylarc Ref L175237

Brand Bremick
Type Class 8.8 hex bolts and nuts
Thread type Metric thread
Bolt size M24 x 75mm
Finish Zinc plated CR 3 plus
Packaging label states 5 pieces net per box
Multiple boxes shown in images

Bremick M24 x 75mm Class 8.8 Hex Bolts and Nuts

Skylarc Ref K175236

Brand Bremick
Type Class 8.8 hex bolts and nuts
Thread type Metric thread
Bolt size M24 x 75mm
Finish Zinc plated CR 3 plus
Packaging label states 5 pieces net per box
Multiple boxes shown in images

Bremick M24 x 50mm Class 8.8 Hex Bolts and Nuts

Skylarc Ref J175235

Brand Bremick
Type hex bolts and nuts
Bolt size M24 x 50mm
Thread type metric
Strength rating class 8.8
Finish zinc plated CR 3+
Packaging label states 5 pcs net per box
Multiple boxes of bolts and nuts shown
Color silver

Hex nuts and bolts assortment

Skylarc Ref I175234

Lot of hex nuts and hex head bolts
Multiple cardboard boxes included
Hex nuts are internal threaded metal fasteners
Hex head bolts are external threaded metal fasteners
Both nuts and bolts appear to be zinc coloured metal
Thread size and pitch not specified
Quantity of nuts not counted
Quantity of bolts not counted
Brand names or model numbers not clearly visible
All items shown in photos are included

Vintage 1940's-1950's era Ridgid No.1&2 Pipe Cutter w/ Grey Finish

Skylarc Ref O175422

Vintage Ridgid No.1&2 (No.1) Pipe Cutter in a grey finish indicating an early model from sometime around the 1940's to 1950's era.
Manufactured in Elyria, Ohio, USA by The Ridgid Tool Company.
Approx 350mm long when fully closed.
This vintage early era Ridgid tool still functions smoothly, cutter wheel still feels sharp.

Renold SD50A1X10FT 50-1 SD Roller Chain 10ft

Skylarc Ref H175233

Brand Renold
Series SD
Model SD50A1X10FT
Type 50-1 SD roller chain
Chain length 10 ft
Chain length 3.05 m
Mass 6.99 lb per chain
Mass 3.17 kg per chain
Packaging shows code SD50A1RB
Chains supplied in individual boxes
Chains supplied sealed in protective wrapping
Quantity included is four chains as shown in photos

Renold SD50A1X10FT 50-1 SD Roller Chain 10ft

Skylarc Ref G175232

Brand Renold
Series SD
Model SD50A1X10FT
Type 50-1 SD roller chain
Chain length 10 ft
Chain length 3.05 m
Mass 6.99 lb per chain
Mass 3.17 kg per chain
Packaging shows code SD50A1RB
Chains supplied in individual boxes
Chains supplied sealed in protective wrapping
Quantity included is four chains as shown in photos

Renold SD50A1X10FT 50-1 SD Roller Chain 10ft

Skylarc Ref F175231

Brand Renold
Series SD
Model SD50A1X10FT
Type 50-1 SD roller chain
Chain length 10 ft
Chain length 3.05 m
Mass 6.99 lb per chain
Mass 3.17 kg per chain
Packaging shows code SD50A1RB
Chains supplied in individual boxes
Chains supplied sealed in protective wrapping
Quantity included is four chains as shown in photos

Renold SD50A1X10FT 50-1 SD Roller Chain 10ft

Skylarc Ref E175230

Brand Renold
Series SD
Model SD50A1X10FT
Type 50-1 SD roller chain
Chain length 10 ft
Chain length 3.05 m
Mass 6.99 lb per chain
Mass 3.17 kg per chain
Packaging shows code SD50A1RB
Chains supplied in individual boxes
Chains supplied sealed in protective wrapping
Quantity included is four chains as shown in photos

Renold SD50A1X10FT 50-1 SD Roller Chain 10ft

Skylarc Ref D175229

Brand Renold
Series SD
Model SD50A1X10FT
Type 50-1 SD roller chain
Chain length 10 ft
Chain length 3.05 m
Mass 6.99 lb per chain
Mass 3.17 kg per chain
Packaging shows code SD50A1RB
Chains supplied in individual boxes
Chains supplied sealed in protective wrapping
Quantity included is five chains as shown in photos

6 x Electrical Motors

Skylarc Ref C175228

6 x Electrical Motors

Assorted Epoxy Applicators

Skylarc Ref B175227

Hilti HDM 330 manual dispenser.
Hilti HDM 500 manual dispenser.
Hilti MD 2000 manual dispenser.
Simpson Strong‑Tie Epoxy‑Tie Tool Model ET22A manual dispenser.
Four additional unidentified manual epoxy or adhesive dispensers.
All tools shown are included in this lot.

Master Workshop Diesel Heater

Skylarc Ref A175226

Workshop Diesel Heater

Orion Infrasun II Heater

Skylarc Ref Z175225

Model Infrasun II
Manufacturer Orion Machinery Co Ltd
Power switch panel with ON and OFF operation selector
Fuse holder on control panel
Three pin electrical plug fitted
Mounted on a wheeled base
Metal frame with push handle
Perforated metal front panel
Guard rails in front of heating surface
Visible fuel tank at base
Mains powered unit
Physical condition as shown in photos
Operating status not tested

Sames e-Jet 2 powder coating unit

Skylarc Ref Y175224

Brand: Sames
Model: e-Jet 2
Trolley mounted powder coating control unit
Control panel with two pressure gauges
Two rotary adjustment knobs on front panel
Digital display unit with four buttons labeled 1 to 4
Label on rear module shows date 18/07/2017
Unit fitted with hoses and connectors as shown
Includes power cable with New Zealand three pin plug
Operational status not tested
Overall condition as shown in photos
No manuals observed
No accessories observed other than what is attached to the unit

Nordson SureCoat Manual Gun Control Unit

Skylarc Ref X175223

Brand: Nordson
Model: SureCoat Manual Gun Control Unit
Mounted on wheeled metal trolley
Front panel with LCD display and control buttons
Buttons include STD AFC VIEW and Select Charge
Pressure panel with three gauges labeled F A and AUX
Each gauge scaled in psi and bar kPa x 100
Three front regulators corresponding to F A and AUX
Rear label states input 85 to 250 VAC 50 or 60 Hz 1.0 A
Rear label shows fuses F1 2A 250V and F2 2A 250V
Rear label indicates use with Sure Coat manual IPS 95kV powder spray guns
Power connection via three pin plug shown in photos
Two flexible hoses attached to unit as shown
One metal clip or clamp attached to cable as shown
Top label lists troubleshooting error codes and descriptions
Overall physical condition visible in photos
Operational status not tested
Accessories or spray gun not included in photos

Hagner E4-X Digital.Luxmeter

Skylarc Ref O175786

Hagner E4-X Digital.Luxmeter.
For measuring illuminace over a range of 0.01 - 200,000 lux.
Powers on when plugged in. Internal battery will need charging. Reading accuracy is untested.
See the manufacturer website below for further item details:
https://hagner.se/products/detail/3/

4x Assorted LED Ceiling or Wall Lights

Skylarc Ref G175778

4x Assorted LED Ceiling or Wall Lights.
Includes:
- Bekas 15W LED 280mm diameter round light, model 31007. With box.
- Bekas 14W LED 275x275mm square light, model 21007, with box.
- Bekas 15W LED 240x195mm rectangle light, model 51012, with box.
- Bekas 19W LED 350x135mm light, model LUMEmini 20, no box.

All are as new unused. The unboxed unit has some light scratches from open storage.

Hitachi 185mm Corded Circular Saw

Skylarc Ref H175441

Hitachi 185mm Corded Circular Saw.
Model No.C7SB2.
Includes pladtic case.
Latches on case are broken.

Nidec Rotary Encoder NE-1024-2MD

Skylarc Ref G175440

Nidec Rotary Encoder.
Model No. NE-1024-2MD.
Manufactured in Japan by Nidec Nemicon Corp.
Encoder measures approx 102x67x67mm with 15mm diameter shaft.
See photos for plug type.

Yokoyama Variable V Transformer Voltac Type SB-5, 1KVA

Skylarc Ref R175789

Yokoyama Variable V Transformer.
Model Voltac Type SB-5.
1KVA.
Made in Japan.
170mm diameter.

TANSTAB Automatic A.C. Voltage Stabiliser TSM2-X20

Skylarc Ref Q175788

Brand: TANSTAB
Device type: Automatic A.C. Voltage Stabiliser
Manufacturer: Crotan Electronics Ltd
Manufacturer location: Hitchin Herts England
Model type: TSM2-X20
Input voltage range: 205-255V A.C.
Output voltage: 230V A.C.
Output current: 15A
Apparent power rating: 3.45kVA
Serial number: 5132
Measurea 385x235x190mm.
Operational condition is unknown.

Weldsafe Titanium Electronic Welding Mask

Skylarc Ref P175787

Weldsafe Titanium Electronic Welding Mask.
Batteries are depleted so electronics not tested.

Vintage Surface Gauge by J.O. Miller, Timaru

Skylarc Ref D175775

Vintage Surface Gauge.
Made in New Zealand in 1955 by J.O. Miller, Timaru.
52mm long.
Excellent condition for a custom made vintage Precision tool.

Eutectic Castolin Rototec 80 Kit

Skylarc Ref D175437

Eutectic Castolin Rototec 80 Kit.
See photos for included components.
Of the three yellow bottles only the Hardtec 19400 is full, the other two bottles are empty.
Operational cindition of tool is unknown.

Goldstar DC Power Supply GP-4303A

Skylarc Ref N175785

Goldstar DC Power Supply.
Model No. GP-4303A.
250x130x140mm.
Includes power cord.
Output details unknown.

Mini 75mm Corded Bench Grinder

Skylarc Ref F175439

Mini 75mm Corded Bench Grinder.
Model No.TDS-75B.
75mm diameter grinding and Buffing wheels.

Vintage Tension Master No.2420 Socket Wrench

Skylarc Ref B175435

Vintage Tension Master No.2420 Socket Wrench.
Made in Australia by Warren & Brown PTY LTD.
410mm tool length.
1/2" socket head.
Includes original box.
Tool in very good overall condition, original box is average to poor condition.

Cambridge Micro-Ohmmeter Model 510

Skylarc Ref L175783

Cambridge Micro-Ohmmeter Model 510.
Includes power cord and user manual.
Unit powered on only, not further tested.

11x Large Ward Branded Collets

Skylarc Ref U175428

11x Large Ward Branded Collets
Made in England by Ward.
All have 115mm length, 56mm diameter base, 85mm diameter tops.
Each with various Imperial sizes from 5/16" to 1.5".

12x BT40 Type Tooling Holders

Skylarc Ref R175425

12x BT40 Type Tooling Holders.
Includes:
- 2x AW branded BT40-ER08-100.
- 9x Big Daishowa Mega Micro Chuck BBT40-MEGA-6S-90.
- 1x Big Daishowa Mega Micro Chuck BBT40-MEGA-NB3-135.

Condition varies with each unit.

9x Bilz ThermoGrip BT40 Type Tool Holders

Skylarc Ref F175413

9x Bilz ThermoGrip BT40 Type Tool Holders.
Units with ledgible markings are model T1000/BT40. All appear to be the same type.
Condition varies greatly with each unit.

10x Assorted BT40 Type Tool Holders

Skylarc Ref E175412

10x Assorted BT40 Type Tool Holders.
Variuos types in widely varying cindition levels, see photos.

11x Assorted Milling Tool Holders

Skylarc Ref D175411

11x Assorted Milling Tool Holders.
8x are BT40 Type and the remaining are other types, see photos.
Condition varies greatly with each unit.

BT40 Tool Holder w/ Iscar 110mm Diameter Indexable Milling Cutter

Skylarc Ref C175410

BT40 Tool Holder w/ Iscar 110mm Diameter Indexable Milling Cutter.
Tool holder is marked 40 SM32X23.
Iscar indexable Milling cutter F45ST-D100-32-1.

Vintage 4-Drawer Steel File Cabinet

Skylarc Ref W175404

Vintage 4-Drawer Steel File Cabinet.
Heavier steel grade construction with datk grey finish.
Key mechanisim is missing.
Includes empty file holders.
Drawer runners move smoothly.

6x Assorted Keyway Broaches w/ Accessories

Skylarc Ref U175792

6x Assorted Keyway Broaches w/ Accessories.
Includes:
- duMont 6mm - C-1, 300mm length.
- Hassay-Savage 1/4" III, 300mm length.
- Hassay-Savage 5mm II, 180mm length.
- duMont 5mm B-1, 170mm length.
- Marlco 5/32", 175mm length.
- Marlco 1/8", 205mm.

Includes assorted broach holders, see photos.
Condition varies with each unit.

Vintage NSC Duo 300 Ring Binder w/ New binding materials

Skylarc Ref S175790

Vintage NSC Duo 300 Ring Binder.
Manufactured sometime in the 1970's or 1980's.
Binds A4 size sheets.
Includes two boxes of as new plastic rings and new packs of front and back cover sheets, see photos.

Atco Isolating Transformer, Single Phase

Skylarc Ref E175438

Atco Isolating Transformer.
Cat No. IST8
Input 230V, single phase, 50 c.p.s.
Output 230V, 1000 VA.
Note input power cord has no ground, see photos.

Beam Lifting Clamp

Skylarc Ref C175436

Beam Lifting Clamp.
ID labeling is missing so manufacturer and lifting capacity details is unknown.
Opens to approx 200mm.

7x Mimatic BT40 Type Tooling Holders

Skylarc Ref T175427

7x Mimatic BT40 Type Tooling Holders.
Unable to decipher part number details from any of the units.
Chuck ends are 13mm.
Chuck jaw conditions are unknown.

5x Guhring Big Daishowa BT40 Tool Holders

Skylarc Ref S175426

5x Guhring Big Daishowa BT40 Tool Holders.
All are Part No. BBT40-SRC25-120.
Condition varies with each tool.

9x BT40 Type Tooling Holders

Skylarc Ref Q175424

9x BT40 Type Tooling Holders.
Includes:
- 4x Big Daishowa Mega New Baby Chuck BBT40-MEGA-8N-135.
- 5x Big Daishowa Mega New Baby Chuck BBT40-MEGA-8N-90.

Condition varies with each unit.

5x BT40 Type Tool Holders.

Skylarc Ref P175423

5x BT40 Type Tool Holders.
Includes:
- 1x Big Daishowa BT40-HMC20-60.
- 2x Big Daishowa New Baby Chuck BT40-NBS16-60.
- 1x Big Daishowa New Baby Chuck BT40-NBS20-60.
- 1x Big Daishowa New Baby Chuck BT40-NBS13-90.

Condition varies eith each unit.

10x BT40 Type Tool Holders

Skylarc Ref N175421

10x BT40 Type Tool Holders.
Units with decipherable markings are Hauser model.SK 40 MAS BT @ 20mm. All units appear to be the same type.
Condition varies greatly with each unit.

4x Sandvik Coromant CoroChuck 930 Tool Holders

Skylarc Ref M175420

4x Sandvik Coromant CoroChuck 930 Tool Holders.
Includes the following Part numbers:
- 930-HA10-P-12-150.
- 930-HA10-P-12-115.
- 930-HA10-S-12-095.
- 492 4 10EH-100 20 100.

Condition varies with each unit.

IT Network Cabinet

Skylarc Ref B175409

IT Network Cabinet.
Interior rack width 460mm, depth 460mm.
Interior vertical space is approx 1050mm.
No back door.
Front door is lockable but key is missing.

3-Door Steel Personnel Locker Cabinet

Skylarc Ref Z175407

3-Door Steel Personnel Locker Cabinet.
Dark brown finish.
Exterior finish scratches, wear, some denting. Interior very good conditiin overall.

Maxim Steel Storage Cabinet

Skylarc Ref Y175406

Maxim Steel Storage Cabinet.
Lockable, key is missing.
One internal adjustable shelf.
Finish scratches and wear from Workshop usage.

Steel Storage Cabinet

Skylarc Ref X175405

Steel Storage Cabinet.
Lockable, key is missing.
Some exterior finish wear, scratches, mild rust spotting. Interior in very good condition.

2x Vintage Precision 3-Drawer Steel File Cabinets

Skylarc Ref V175403

2x Vintage Precision 3-Drawer Steel File Cabinets.
Both in matching retro colours.
Both have locks but keys are missing.
Exterior finish wear scratches, some surface rusting, etc.

Europlan 4-Drawer Steel File Cabinet

Skylarc Ref U175402

Europlan 4-Drawer Steel File Cabinet.
Lockable, key is missing.
A newer unit it showing mild usage marks.

Vintage Precision 4-Drawer Steel File Cabinet

Skylarc Ref T175401

Vintage Precision 4-Drawer Steel File Cabinet.
Lockable, key is missing.

Precision 4-Drawer Steel File Cabinet

Skylarc Ref C175800

Precision 4-Drawer Steel File Cabinet.
Lockable, keys are included.
Some scratching to top panel.

Europlan Forte Steel 3-Drawer File Cabinet

Skylarc Ref B175799

Europlan Forte Steel 3-Drawer File Cabinet.
Lockable, key is included.
Black body with dark red drawer fronts.
Shows generally mild usage marks, scratches.

Precision 4-Drawer Steel File Cabinet

Skylarc Ref A175798

Precision 4-Drawer Steel File Cabinet.
Lockable, key is missing.
Blue finish.
Some finish scratching to top panel.

2x Precision Steel File Cabinets

Skylarc Ref Z175797

2x Precision Steel File Cabinets.
Both matching exterior light grey finish.
Both lockable, Both missing keys.
2-drawer unit 645x495x730mm.
3-drawer unit 645x495x1020mm.

2x Precision Steel File Cabinets

Skylarc Ref Y175796

2x Precision Steel File Cabinets.
Both lockable, Both missing keys.
2-drawer unit 645x495x730mm.
3-drawer unit 645x495x1020mm.
Some moderate finish wear, scratches on both units.

Vintage 3-Drawer Steel File Cabinet

Skylarc Ref X175795

Vintage 3-Drawer Steel File Cabinet.
Made in New Zealand.
Lockable, key is missing.
Older heavier grade steel construction with smooth drawer runners.

2x Crawford Multibore Collets

Skylarc Ref W175794

2x Crawford Multibore Collets.
One is 6.35mm to 9.52mm.
Second is 25.4mm to 28.57mm.
Uncompressed outer dimensions of both collets are approx 90mm diameter, 62mm tall.

OSG Threading Die Head

Skylarc Ref V175793

OSG Threading Die Head.
Unable to locate a model number.
Total unit length 180mm.
Head diameter 100mm.
Inner bore 40mm.
Mounting shank 45mm diameter, 75mm long.

Vintage Brua VMG-50 Phasometer Phase Angle Meter

Skylarc Ref M175784

Vintage Brua VMG-50 Phasometer Phase Angle Meter.
Made in Austria.
230x130x210mm.
Includes user manual.
Power cord needs replacing before testing. Operational condition unknown.

Live Lathe Centre by Ward

Skylarc Ref I175780

Live Lathe Centre by Ward.
Made in England.
24mm diameter live cone that turns smoothly.
38mm diameter, 90mm long mounting shank.

13mm Keyed Drill Chuck w/ No.3 Tapered Shank

Skylarc Ref H175779

13mm Keyed Drill Chuck w/ No.3 Tapered Shank.
Jacobs Chuck USA branded.
Chuck key is missing.

Vintage Metal Parts Storage Drawer Unit

Skylarc Ref T175791

Vintage Metal Parts Storage Drawer Unit.
Measures 360x150x190mm.
Large top compartment 40mm deep.
9x lower drawers each 155x115x45mm.
Dirty surfaces. One drawer is stuck in. Would benefit from a restoration and cleanup.