DART ENGINEERING HEAVY WELDING SITE AUCTION

Toyota 3 Ton Diesel Forklift

$11,400

Sold 26/04/2026

Skylarc Ref O177424

Model: Toyota 02-7FD30
3.6 metre lift
2 stage mast
Side shift
1200mm forks
Toyota 2Z diesel engine
ROPS cab
Starts easy and runs well
Includes 1800mm extension forks
Available for collection the week of May 4th

Ifor Williams Triple Axle Flat Deck Trailer

$10,300

Sold 26/04/2026

Skylarc Ref K177420

Ifor Williams 3C6 LM167G3.
4850mm x 2240mm deck
Manufactured 2012
WOF expires May 2026
Registration expires 19 April 2026
3500kg GVM
50mm tow ball
Hydraulic brakes
12" wheels
Missing sides and ramps
Needs a tidy up

Sahinler Hydraulic Punch and Shear

$10,000

Sold 27/04/2026

Skylarc Ref J177497

Brand Sahinler
Model HKM65
Type hydraulic steelworker punch shear
Production year 2017
Motor power 5.5 kW
Voltage and frequency 415 V 50 Hz
Power supply 3 phase
Punching capacity Ø26 x 20 mm
Punching capacity Ø57 x 10 mm
Flat bar shearing capacity 300 x 20 mm
Flat bar shearing capacity 375 x 15 mm
Angle cutting capacity 90 degrees 120 x 120 x 12 mm
Angle cutting capacity 45 degrees 70 x 10 mm
Section cutting capacity Ø45 mm
Section cutting capacity 45 mm
Notching capacity 90 mm x 45 mm at t=10 mm
Vee notching capacity 107 mm x 10 mm at 90 degrees
Machine weight 1600 kg
Foot pedal control
Various punch and die tooling shown
Roller support stand

2005 Toyota Hiace

$7,650

Sold 26/04/2026

Skylarc Ref A176188

2005 Toyota Hiace
2 litre 4 cylinder petrol engine
267721km on clock
Automatic transmission
Roof rack
Tow bar
Alloy wheels
Crack in windscreen
Dent on bottom left side
WOF expires 12/02/2027
Registration expires 14/09/2026

2012 Mazda Bounty

$7,600

Sold 26/04/2026

Skylarc Ref P177191

2012 Mazda Bounty
292584km on clock
Single cab
2 wheel drive
6 speed manual transmission
2100mm x 1850mm drop side ply deck
Timber supports
Bull bars
Reversing camera
RUC will be up to date on collection
Registration expires 17/07/2026
WOF expires 18/08/2026

2015 Mantall XE120W Scissor Lift

$7,000

Sold 01/05/2026

Skylarc Ref G177442

Model: Mantall XE120W Aerial Work Platform
Serial number 0341150354
Date of production 2015
Maximum platform height 10 m
Rated load capacity 320 kg
Maximum load at centre 240 kg
Maximum load at cantilever 130 kg
Weight 2630 kg
Maximum gradeability 25 percent
Made in China
Battery powered
Compliance AS NZ 1418.10-2011
Logbook present on platform
Control system with joystick
Platform guardrails
Recent inspection label present
Inspection certificate issue date 10-2-26
Inspection certificate expiry date 10-8-26
Next major inspection 11-7-2028
1000mm extending platform

EWM Phoenix 355 Progress Puls MM T Welder

$6,850

Sold 26/04/2026

Skylarc Ref Z177461

Brand: EWM
Model: Phoenix 355 Progress puls MM T
Phoenix puls MULTIMATRIX series
Three phase 32 amp plug
Integrated wire feed unit
Wire spool mount inside side compartment
Control panel with digital display and rotary knobs
Torch lead connected to front output
Power input lead attached
No negative electrode

Cosen SH-460M Bandsaw

$5,220

Sold 26/04/2026

Skylarc Ref L177447

Manufacturer Cosen Machinery Industrial Co Ltd
Model SH-460M
Year of manufacture 2013
Drive motor rating 2 HP
Three phase 32 amp plug
Blade length 3505 mm
Blade width 27 mm
Blade thickness 0.9 mm
Bandsaw fitted with roller conveyor infeed and outfeed tables
Bandsaw includes manual vice clamp
Bandsaw includes pivoting bow for mitre cutting
Freestanding control box with push buttons and speed control knob
Automatic return
Vice damaged but functional
Buyer to decommission

Huge Lot of Box Section Steel

$4,960

Sold 26/04/2026

Skylarc Ref V176183

Approx 105 lengths
Sizes include
150mm x 150mm
200mm x 200mm
250mm x 250mm
Most lengths approx 3500mm long

Hydraulic Pneumatic Workshop Press

$4,330

Sold 26/04/2026

Skylarc Ref I177444

Hydraulic workshop press
Powered by pneumatic to hydraulic pump
990mm between uprights
80mm tip
Arbor press on end
Cable raise and fall bed
Screw adjustment tip

Emco Single Phase Milling Machine

$4,330

Sold 26/04/2026

Skylarc Ref O176176

Model: Emco FB-2
640mm x 150mm t-slot table
No.2 MT spindle taper
6 spindle speeds 120 - 2000rpm
0.22kW motor
Power feeds on the X axis
40mm spindle travel
500mm adjustable column
Indexing head
2 x milling vices
Boring and having head
Collet set
Assorted tooling

Bulldozer 25T Steel Bender

$4,240

Sold 26/04/2026

Skylarc Ref R177479

Brand The Bulldozer
Manufacturer R Auton Ltd
Model 25T
Three phase
Pressure rating 1900 bar
25 ton capacity
Has been modified with heavy duty bending mount

BOC Smootharc Advance III MIG Beast 555R

$4,010

Sold 26/04/2026

Skylarc Ref Z177487

Brand BOC Smootharc Advance III Beast MIG555R.
Input supply AC 420V three phase
MIG process up to 555A at 42.2V.
MIG gun
Separate wire feed unit
Gas regulator
Mounted on wheeled trolley base.
Missing cover from wire feed display

BOC Smootharc Advance III MIG Beast 555R

$3,760

Sold 26/04/2026

Skylarc Ref C177490

Brand BOC Smootharc Advance III Beast MIG555R.
Input supply AC 420V three phase
MIG process up to 555A at 42.2V.
MIG gun
Separate wire feed unit
Gas regulator
Mounted on wheeled trolley base.
Missing cover from wire feed display

BOC Smootharc Advance III MIG Beast 555R

$3,730

Sold 26/04/2026

Skylarc Ref U177456

Brand BOC Smootharc Advance III Beast MIG555R.
Input supply AC 420V three phase
MIG process up to 555A at 42.2V.
MIG gun
Separate wire feed unit
Gouging torch
Gas regulator
Mounted on wheeled trolley base.

BOC Smootharc Advance III MIG Beast 555R

$3,723

Sold 26/04/2026

Skylarc Ref D177491

Brand BOC Smootharc Advance III Beast MIG555R.
Input supply AC 420V three phase
MIG process up to 555A at 42.2V.
MIG gun
Separate wire feed unit
Gouging torch
Gas regulator
Mounted on wheeled trolley base.

BOC Smootharc Advance III MIG Beast 555R

$3,720

Sold 26/04/2026

Skylarc Ref N177423

Brand BOC Smootharc Advance III Beast MIG555R.
Input supply AC 420V three phase
MIG process up to 555A at 42.2V.
MIG gun
Separate wire feed unit
Gas regulator
Mounted on wheeled trolley base.

Zinc-Arc M230 Metal Spray System

$3,680

Sold 26/04/2026

Skylarc Ref P177425

Brand: Zinc-Arc
Type: M230
Serial number: 151-8424 0943
Rated input current: 14.0 A
Mains voltage: 240 V
Phase: 1
Mains frequency: 50 Hz
Welding current range: 30–230 A
Maximum welding current: 190 A
Duty cycle: 190 A at 60 percent
Power source made in Hungary
Unit on wheeled base
Includes dual wire spools on top of unit
Includes spray gun with hose bundle
Includes air pressure regulator and gauge assembly

BOC Smootharc Advance II 400R MIG Welder

$3,545

Sold 26/04/2026

Skylarc Ref X177485

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 1 phase 420V 50 or 60Hz.
Duty cycle up to 400A 36V.
Trolley mounted power source with wheels.
Separate Smootharc Advance II wire feeder unit fitted.
MIG torch attached to feeder.
Gouging torch
Gas hose and twin gauge gas regulator attached.
3 phase 32 amp plug

BOC Smootharc Advance III MIG Beast 555R

$3,310

Sold 26/04/2026

Skylarc Ref I177470

Brand BOC Smootharc Advance III Beast MIG555R.
Input supply AC 420V three phase
MIG process up to 555A at 42.2V.
MIG gun
Separate wire feed unit
Gouging torch
Gas regulator
Mounted on wheeled trolley base.

Steel Frame and Contents of Structural Steel

$3,260

Sold 26/04/2026

Skylarc Ref K176198

2800mm x 9100mm x 770mm steel frame
Contents include:
6 x 305mm x 165mm I-beam x 7900mm, 8180mm, 5 x 8180mm with plates on ends
2 x 260mm x 145mm I-beam x approx 8000mm
Various holes drilled in them
150mm x 150mm H-beam 5310mm long
145mm x 145mm box steel 8600mm painted
355mm x 170mm I-beam 4590mm
465mm x 190mm I-beam 8620mm
355mm x 170mm I-beam 8300mm plates welded on side
200mm x 200mm angle steel 7200mm
Various smaller lengths

13 Lengths Box Steel

$3,060

Sold 26/04/2026

Skylarc Ref Z176187

150mm x 150mm
Length 3600mm - 3700mm

BOC Smootharc Advance III MIG Beast 555R

$2,610

Sold 26/04/2026

Skylarc Ref G177494

Brand BOC Smootharc Advance III Beast MIG555R.
Input supply AC 420V three phase
MIG process up to 555A at 42.2V.
MIG gun
Separate wire feed unit
Gouging torch
Gas regulator
Mounted on wheeled trolley base.

BOC Smootharc Advance II 400R MIG Welder

$2,610

Sold 26/04/2026

Skylarc Ref M177474

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 1 phase 420V 50 or 60Hz.
Duty cycle up to 400A 36V.
Trolley mounted power source with wheels.
Separate Smootharc Advance II wire feeder unit fitted.
Missing switch tops but still working
MIG torch attached to feeder
Gas hose and twin gauge gas regulator attached.
3 phase 32 amp plug

Steel Rack and Contents

$2,600

Sold 26/04/2026

Skylarc Ref Z177409

4350mm x 1700mm x 2400mm tall steel rack
Contents include:
Angle steel up to 8000mm long
Flat bar
Pipe
Buyer to unload
l

Bramley Wright Linishall Belt Linisher

$2,252

Sold 26/04/2026

Skylarc Ref I177496

Brand: Bramley.
Base branded Wright Linishall.
Free standing pedestal mounted belt linisher.
Electric motor is Crompton Greaves three phase TEFC induction motor.
Motor rating 2.2kW.
Motor speed 2840rpm.
Three phase 32 amp power plug
Belt is fitted over drive wheel and idler rollers.
Machine has adjustable work rest in front of drive wheel.
Start and stop push button control box mounted on top of belt housing.
Some spare belts

Emco Single Phase Lathe

$2,131

Sold 26/04/2026

Skylarc Ref P176177

Model: Emco Maximat V10-P
Single phase
650mn between centers
250mm swing over bed
8 spindle speeds 60 - 2500rpm
Thread cutting
Approx 20mm spindle bore
0.6kW motor
Work light
120mm three jaw chuck
150mm four jaw chuck
190mm faceplate
Fixed steady
Quick change tool post
2 x drill chucks
Various tooling
Tidy little home handyman machine

BOC Smootharc Advance II 400R MIG Welder

$2,027

Sold 26/04/2026

Skylarc Ref F177441

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 1 phase 420V 50 or 60Hz.
Duty cycle up to 400A 36V.
Trolley mounted power source with wheels.
Separate Smootharc Advance II wire feeder unit fitted.
MIG torch attached to feeder
Gas hose and twin gauge gas regulator attached.
3 phase 32 amp plug

BOC Smootharc Advance II 400R MIG Welder

$2,000

Sold 26/04/2026

Skylarc Ref Y177486

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 1 phase 420V 50 or 60Hz.
Duty cycle up to 400A 36V.
Trolley mounted power source with wheels.
Separate Smootharc Advance II wire feeder unit fitted.
MIG torch attached to feeder.
Gas hose and twin gauge gas regulator attached.
3 phase 32 amp plug

19 Lengths Box Steel

$1,880

Sold 26/04/2026

Skylarc Ref C176190

150mm x 150mm
Shortest length 3000mm
Longest length 3600mm

Audi RS6 V10 Transmission and Subframe

$1,810

Sold 26/04/2026

Skylarc Ref R177427

Audi RS6 transmission
From V10 Twin Turbo car
Unknown condition
Engine was going to be used for a project
Includes rear subframe with with brakes etc

Luxcut GH-25 Upright Drilling Machine

$1,610

Sold 26/04/2026

Skylarc Ref H177495

Brand Luxcut
Model GH-25
Type upright drilling machine
Maximum drilling diameter 25mm
Spindle speeds 100 205 345 690 440 885 1450 2900 rpm
150mm spindle travel
MT 4 spindle taper
Three phase induction motor
Motor speed 1410 or 2880 rpm
380mm round table
Rack and pinion height adjustment on column
Spindle spring return missing, has been replaced with counter weight

19 Lengths Box Steel

$1,600

Sold 26/04/2026

Skylarc Ref U176182

150mm x 150mm
Lengths from 3400mm - 3500mm

15 Lengths Box Steel

$1,580

Sold 26/04/2026

Skylarc Ref G176194

12 x 150mm x 150mm x 3500mm
2 x 90mm x 90mm x 2230mm
250mm x 250mm x 3600

Dangerous Goods Cabinet

$1,420

Sold 26/04/2026

Skylarc Ref R176179

Brand Chemshed
Manufactured by Te Pari Products Ltd
Serial number 00855
Yellow metal flammable liquid storage cabinet
Front door labelled FLAMMABLE LIQUID class 3
Cabinet labelled NO SMOKING NO IGNITION SOURCES WITHIN 3m
Single lockable door with key included
Internal adjustable shelf support rails present
Door fitted with internal closer mechanism
Door fitted with safety retention cable

Hilti TE30 AVR SDS Plus Rotary Hammer

$1,250

Sold 26/04/2026

Skylarc Ref J176795

Brand Hilti
Model TE 30 AVR 02
Type rotary hammer drill.
SDS Plus tool holder.
Voltage rating 220 to 240 V.
Frequency rating 50 to 60 Hz.
Power rating 1010 W.
Speed range 0 to 1100 rpm.
Maximum drilling diameter in concrete 28 mm.
Corded electric power supply.
Made in Austria.
Serial number 144386
Includes red plastic Hilti carry case.
Includes assorted used SDS Plus drill bits as shown.
Video provided by seller shows the tool operating.

8 x Lengths Box Steel

$1,241

Sold 26/04/2026

Skylarc Ref W176184

2 x 150mm x 150mm x 3630mm
3 x 200mm x 100mm 6000mm, 5400mm, 5400mm
250mm x 150mm x 3200mm, 3300mm

Rotabroach Element 50 Low Profile Magnetic Drill

$1,210

Sold 26/04/2026

Skylarc Ref K176718

Rotabroach Element 50 Low Profile Magnetic Drill.
Includes case, attached Annular cutter, and side lever wrench.
Operates, see video, but not tested at length or under load.

3 Long Lengths Box Section Steel

$1,210

Sold 26/04/2026

Skylarc Ref N176175

200mm x 200mm box steel
2 x 12900mm long (one with small cutout at end)
1 x 8580mm long
Painted

Forklift Gib Crane

$1,208.45

Sold 26/04/2026

Skylarc Ref V177483

Manufacturer East West Engineering
Type TJCL45 telescopic jib attachment
Year of manufacture 2015
Serial number 97626
Safe working load 4500 kg
Unit weight 190 kg
Horizontal centre of gravity 1080 mm
Overall construction galvanised steel
Fork pockets integrated into base
Includes telescopic jib arm
Includes hook at jib end
Includes safety chains on base

BOC Smootharc Advance II 400R MIG Welder

$1,111

Sold 26/04/2026

Skylarc Ref E177440

Brand BOC Limited.
Model Smootharc Advance II 400R MIG 400R.
Rated for MIG and MMA processes.
Input supply 1 phase 420V 50 or 60Hz.
Duty cycle up to 400A 36V.
Trolley mounted power source with wheels.
No wire feed
Beast 555R covers
Setup for gouging
3 phase 32 amp plug

Large Lot of Fastening Hardware w/ 3x Wall Racks

$1,061

Sold 26/04/2026

Skylarc Ref T177143

Large Lot of Fastening Hardware w/ 3x Wall Racks.
4800mm total combined length of all racks with many binding filled with various fastening hardware including bolts, nuts, washers, anchors and other similar items.
Also include the boxes of Fastening Hardware on the floor under the racks.
See photos for further details on what is included.
Note that buyer should bring extra hands to assist with removing all these items as well as tools to unscrew the racks from the wall as we will have only limited staff onsite.

Assorted Steel

$910

Sold 26/04/2026

Skylarc Ref K176172

4 x lengths 145mm x 250mm x 5550mm I-beam
Various short lengths 300mm x 90mm channel
Various other short steel sections

9 Lengths Box Steel

$905

Sold 26/04/2026

Skylarc Ref D176191

150mm x 150mm
Shortest length 2470mm
Longest length 3500mm

Large Lot of Structural Steel

$905

Sold 26/04/2026

Skylarc Ref A176162

Has been fabricated for unknown job
Mostly 350mm x 150mm I-beam with parts welded on
Longest lengths 8300mm
Various lengths of 100mm x 75mm angle steel
Longest lengths 4070mm
Most have holes drilled
Various lengths of assorted channel
You will need a hiab or similar to load this

Broomwade Compressor and Air Dryer

$890

Sold 26/04/2026

Skylarc Ref E177414

Niven BroomWade brand compressor
Twin tank
Swan SVU-205 2 cylinder compressor pump
CMG 3 phase motor
Radiator style air cooler
Will be electrically disconnected but buyer will need to dismantle for collection

8 Lengths Box Steel

$816

Sold 26/04/2026

Skylarc Ref F176193

150mm x 150mm
Shortest length 2700mm
Longest length 3950mm

Telwin Hand Held Spot Welder

$805

Sold 26/04/2026

Skylarc Ref Q176178

Brand Telwin
Model Modular 10
Input voltage 220 V
Frequency 50 or 60 Hz
Input current 28 A
KVA rating 3 at 50 percent duty cycle
Insulation class B
Welding frequency per minute N'3
Off time 20 seconds
Power factor cos phi 0.2 to 0.8
Steel T setting marked 1 plus 1
Single phase plug fitted
Mounted on removable metal stand
Made in Italy

9 Lengths Box Steel

$795

Sold 26/04/2026

Skylarc Ref B176189

150mm x 150mm
Lengths from 3400mm - 3500mm
Two short offcuts

Steel Rack and Contents

$780

Sold 26/04/2026

Skylarc Ref P177477

3350mm x 1060mm x 2650mm tall steel rack
Contents includes:
Lengths of 20mm pipe
25mm galvanized pipe
20mm bar
Assorted rebar
Assorted offcuts
2 pallets of steel plate pieces
Buyer to unload rack

9 Lengths Box Steel

$765

Sold 26/04/2026

Skylarc Ref E176192

150mm x 150mm
Shortest length 2800mm
Longest length 3500mm

Pallet of Steel Bar

$750

Sold 26/04/2026

Skylarc Ref F176739

50mm x 10mm
870mm - 1090mm long
Approx 160 lengths

9 Lengths Box Steel

$731

Sold 26/04/2026

Skylarc Ref H176195

150mm x 150mm x 3500mm

Pipe Bender Parts

$720

Sold 26/04/2026

Skylarc Ref M177422

Assorted pipe bender parts
Formers from 3/4" to 2"
Frame
Various other bits and pieces
No hydraulics

4 Bays of Racking and Contents

$715

Sold 26/04/2026

Skylarc Ref C176164

Capital style pallet racking one bay
2000mm wide x 640mm deep x 2440mm tall
3 bays Rack'N'Stack racking
2550mm wide x 640mm deep x 2380mm tall
Contents include
Broken power tools
Welder parts
Electrical cabling
Broken submersible pump
Industrial sundries
Hilti applicator guns
Buyer to dismantle

Steel Frame and Contents of Structural Steel

$706

Sold 26/04/2026

Skylarc Ref I176196

2800mm x 9100mm x 2370mm steel frame
Contents include a wide range of short lengths of structural steel
Profiles include
155mm x 155mm H-beam
255mm x 255mm H-beam
310mm x 310mm H-beam
350mm x 170mm I-beam
360mm x 170mm I-beam
2 x 310mm x 320mm H-beam metre lengths
205mm x 200mm H-beam 6 metre lengths
Various lengths of flat bar
Range of other short lengths

8 x Large Steel Bins

$701

Sold 26/04/2026

Skylarc Ref J177419

6 x 1240mm x 830mm x 970mm tall with folding fronts
930mm x 630mm x 640mm tall scrap bin
940mm x 910mm x 460mm tall scrap bin

Evolution Magnetic Drill EM42

$696

Sold 26/04/2026

Skylarc Ref L176719

Evolution Magnetic Drill EM42.
Includes case, attached annular cutter, and fluid tank attachment.
Single phase.
Drill operates, see video, but not tested at length or under load.

Large Set of Steel Stairs

$689

Sold 26/04/2026

Skylarc Ref G177416

Fabricated from 3mm sheet steel
1550mm wide stairs
Includes various steel parts on ground

Evolution Magnetic Drill EM42

$670

Sold 26/04/2026

Skylarc Ref I176716

Evolution Magnetic Drill EM42.
Single phase.
Case not included.
Tool operates, see video, but not tested at length or under load.
See the manufacturer website below for further item details:
https://shop.evolutionpowertools.com/products/evomag42?variant=12232331493412

Hafco Metalmaster BG-10 Bench Grinder

$655

Sold 26/04/2026

Skylarc Ref J177445

Brand Hafco Metalmaster
Model BG-10
Bench grinder on pedestal stand
Grinding wheel size 250 x 36 x 25.4 mm
Single phase motor
Voltage 240 V
Frequency 50 Hz
Output power 1000 W
Current 4.5 A
No load speed 2850 rpm
Manufacture date 5 2012
Serial number 173128
Fitted with one grinding wheel
Fitted with one wire wheel
Includes eye shield on grinding wheel side

Vintage Steel 24 Drawer Cabinet

$648

Sold 26/04/2026

Skylarc Ref D177439

Sliding drawers
Contents of taps, drills some metal parts
Most drawers empty

Iwatani PC12 Gas Cutter w/ Track, Faulty

$625

Sold 26/04/2026

Skylarc Ref J177159

Iwatani PC12 Gas Cutter w/ Track.
Single phase.
Includes 1800mm long track.
Condition - Motor will run when dial turned most of the way up, but there is no movement from drive wheels. Side plate cover is missing.

4 Pallets of Steel Plate Parts

$620

Sold 26/04/2026

Skylarc Ref C177412

Various steel components
Plate steel

Rotabroach Commando 40 Magnetic Drill

$605

Sold 26/04/2026

Skylarc Ref H176715

Rotabroach Commando 40 Magnetic Drill.
Single phase.
Includes case.
Tool operates, see video, but not tested at length or under load.
See manufacturer website below for further item details:
https://www.rotabroach.co.nz/commando-40

4x Adjustable Height Sawhorses

$600

Sold 26/04/2026

Skylarc Ref B176735

4x Adjustable Height Sawhorses.
All are steel construction with varying frame build sizes.
Top beam lengths from 600mm to 830mm.
Each has a automotive type scissor jack built in unwritten top beans.
All.are at lowest heights with heights from 770mm to 800mm.
Max heights are around 950mm.
See photos for further design details.

Heavy duty steel workbench

$570

Sold 26/04/2026

Skylarc Ref J177471

3mm double sheet steel top
Angle and box steel frame
Contents of bolts etc

Heavy Duty Steel Workbench with Vice

$565

Sold 26/04/2026

Skylarc Ref O177450

920mm work top height
15mm plate steel top
Record No.6 150mm vice
15mm plate back board
Front drawer

FE Power Tools Magnetic Drilling Machine FE32X

$551

Sold 26/04/2026

Skylarc Ref V176781

FE Power Tools Magnetic Drilling Machine.
Model No. FE32X.
Single phase.
Drill Magnet operates ok. Drill motor runs but spits lots of sparks, likely bad motor brushes.
Very dirty from industrial workshop usage.

Heavy Duty Steel Workbench

$550

Sold 26/04/2026

Skylarc Ref E177492

6mm plate steel top
Box steel frame
Lower ply shelf
Record No.6 150mm vice
Steel frame reinforcing underneath top

4-Leg Lifting Chain Assembly, 4250kg max

$545

Sold 26/04/2026

Skylarc Ref W176730

4-Leg Lifting Chain Assembly.
Chain Lengths 2.38m.
Chain size 8mm.
Single leg max capacity 2000kg.
4-leg capacity 4250kg.
Certification tag expired 02/2026

Steel Workbench

$535

Sold 26/04/2026

Skylarc Ref Z176759

Steel Workbench.
Custom built from various sizes of box steel frame with a 8mm plate steel top surface.

Three Phase Sander

$530

Sold 26/04/2026

Skylarc Ref M177448

Trade Quality brand
4000 watt
650mm long sanding surface
75mm wide belt
Adjustable angle
3 phase 32 amp plug
Missing cover

Materials Roller Table

$527.85

Sold 26/04/2026

Skylarc Ref T177481

2400mm long roller table
590mm wide rollers
55mm diameter rollers

Large Steel Dolly

$525

Sold 26/04/2026

Skylarc Ref S176180

Appears to have been built for jetboat hulls
On castor wheels
Adjustable screw jacks
Aluminum supports

Remington Power Diesel Heater

$510

Sold 26/04/2026

Skylarc Ref Y177460

Brand Remington Power
Model RPH2150KFA
Portable forced air heater
Rated output 215000 BTU per hour
Fuel type paraffin or kerosene
Fuel consumption 6.17 litres per hour
Fuel tank capacity 49 litres
Pump pressure 0.55 bar
Power supply 230 VAC 50 Hz
Rated current 2.3 amps
Single phase unit
Thermostat control knob on control panel
Digital temperature display on control panel
Unit mounted on wheeled frame

3 x Welder Wire Feeds

$500

Sold 26/04/2026

Skylarc Ref E176166

Cigweld Weldskill 4R
BOC Smootharc Advance II
Lincoln Electric LN-25
All untested

55x 3M Cubitron II Flexible 125mm Grinding Wheels

$495

Sold 26/04/2026

Skylarc Ref N176799

55x 3M Cubitron II Flexible 125mm Grinding Wheels.
3M part No.14443.
125x3x22.23mm disks.
Expiry dates of 07/2028.
New leftover workshop Consumables supply stock.

15 Lengths Channel Steel

$482

Sold 26/04/2026

Skylarc Ref Y176186

Sizes include
100mm x 50mm
150mm x 75mm
180mm x 75mm
230mm x 70mm
300mm x 90mm
Longest length 2800mm

Materials Roller Table

$480.85

Sold 26/04/2026

Skylarc Ref U177482

2400mm long roller table
590mm wide rollers
55mm diameter rollers

Formula Drill Press Bench Type

$465

Sold 26/04/2026

Skylarc Ref O177476

Brand Formula
Model FAT503
Type Drill Press Bench Type
Digital depth display
LED light
Swing 360mm
Spindle taper MT2
Speed changes 16
Motor rating 230V 50Hz 750W
Drilling capacity 20mm
Spindle speed range 220 to 2840 RPM
Spindle travel 82mm
Three handle feed lever
Keyed drill chuck fitted
Machine vice mounted on drill table
Includes drill chuck
Runs but requires hand turning the chuck to start (see video)

10x Annular Cutters, 18mm to 50mm dia

$462

Sold 26/04/2026

Skylarc Ref N175707

10x Annular Cutters.
Includes sizes 18mm (3x), 19mm, 20mm, 32mm, 36mm, 38mm, 40mm, and 50mm.

DeWalt Mitre Saw on Stand

$456.98

Sold 26/04/2026

Skylarc Ref N177475

Unknown model DeWalt Mitre Saw
235mm blade
Single phase
On aluminum and steel stand

Heavy Duty Mobile Workshop Table Workbench

$456

Sold 26/04/2026

Skylarc Ref O176748

Heavy Duty Mobile Workshop Table Workbench.
55x55x5mm angle steel frame with 18mm plywood top.
100mm diameter castor wheels.
Sturdy Mobile table.

Large Wheeled Dolly

$455

Sold 26/04/2026

Skylarc Ref L177421

Box steel frame
Formerly used for moving steel around
Hooks both ends

Enerpac Hydraulic Hand Pump P392

$435

Sold 26/04/2026

Skylarc Ref G176792

Enerpac Hydraulic Hand Pump.
Model P392.
Maximum Operating Pressure 10,000 psi (700 bar).
Pressure Rating 1st Stage 200 psi (13 bar).
Pressure Rating 2nd Stage 10,000 psi (700 bar).

Has damaged outer hose sleeve, see photos.

See the manufacturer website below for further details:
https://www.enerpac.com/en-us/lightweight-hand-pumps/hand-pump-two-speed/P392?srsltid=AfmBOoqgJLkXTJHS-aHlgxdLuaEhzhQZ3Qw-opr4iGUP6ImGc8e4pgJ1

Assorted Tools, Clamps, Sledges, & More

$430

Sold 26/04/2026

Skylarc Ref D177153

Assorted Tools, Clamps, Sledges, & More.
Includes 2x sledge hammers, 3x F-clamps, 4x G-clamps, Chain length, small steel toolbox, BlackRidge air drill, small jack stand, 600mm breaker bar, spare drill side handles, Caulking gun.
See photos for further details on included items and their varying conditions.

15 Lengths Steel

$425

Sold 26/04/2026

Skylarc Ref X176185

Sizes include
Channel 180mm x 70mm
300mm x 90mm
H-beam 255mm x 250mm
Longest length 2800mm

25-ton Eagle Pro Hydraulic Cylinder ES-254

$420

Sold 26/04/2026

Skylarc Ref I176794

Brand Eagle Pro
Model ES-254
Type hydraulic cylinder.
Capacity 25 tonne.
Maximum pressure 700 bar.
Maximum pressure 10000 psi.
Stroke length 102 mm.
Oil type 32 hydraulic oil.
Oil capacity 339 ml.
Serial number F01260001

Reinforced Steel Chemical Cabinet

$406

Sold 26/04/2026

Skylarc Ref J176769

Reinforced Steel Chemical Cabinet.
Lockable self closing doors, keys is missing.
Buyer may have the partially used items currently within the cabinet as well if they wish, see photos

PEGIC GP 350 RT cold saw

$406

Sold 26/04/2026

Skylarc Ref H176169

Brand PEGIC
Model GP 350 RT
Year 2014
Blade diameter 350mm
Blade bore 30mm
Blade thickness 3.2mm
Motor power 1.8kW
Rated current 10.2A
Motor speed 2810rpm
Supply voltage 230V
Frequency 50Hz
Single phase motor
Approximate machine weight 52kg
Cast base with rotating mitre table
Integrated machine vice
Manual downfeed operation
Dust extraction hose outlet at rear of saw head
Faulty, doesn't power up

2 x Tirfor Style Cable Winches

$405

Sold 26/04/2026

Skylarc Ref K177498

One Tirfor brand, unknown capacity
Body is 490mm not including hook
One unknown brand, body is 460mm long not including hook
Both are stiff but seem to work

3-Phase 32A Power Extension Lead Cable

$390

Sold 26/04/2026

Skylarc Ref Q176724

3-Phase 32A Power Extension Lead Cable.
Approx 20 metre length.

Bramley Bar Bender

$372.50

Sold 26/04/2026

Skylarc Ref Q177478

Bramley bar bender
On stand missing one leg

Pair of Large Heavy Steel Sawhorses

$371

Sold 26/04/2026

Skylarc Ref E176738

Pair of Large Heavy Steel Sawhorses.
100x100mm box steel legs with 175x90mm I-beam top.
A very Heavy duty set.

Bar Bender on Stand

$370

Sold 26/04/2026

Skylarc Ref K177446

SI OLINE brand
On pedestal mount

EWM TIg 300 Welding Torch, New

$365

Sold 26/04/2026

Skylarc Ref M176798

EWM TIg Welding Torch.
Part No.TIG 300 GD HD 8P 2T 4M.
Made in Germany.
Includes original box.
As new unused leftover workshop spare parts stock Some dust inside box and dirty box exterior from Workshop storage.

Nordson dust extraction unit MOD No. HOF3

$356

Sold 26/04/2026

Skylarc Ref T177403

Job No 941221
Mod No HOF3
Max air pressure 620 kPa
Power requirement 415 V 3 phase 50 Hz
Motor and fan assembly mounted underneath unit
Fabric filter bags fitted underneath hopper section
Steel support frame with four blue legs
Large rectangular intake enclosure at front
Electrical control box mounted on side of unit
Front legs damaged

2-Leg Lifting Chain Assembly, 4250kg Capacity

$355

Sold 26/04/2026

Skylarc Ref L175705

2-Leg Lifting Chain Assembly.
4250kg 2-leg Capacity, 3150kg single leg.
3000mm chain length.
10mm chain size.
Certification tag good till 02/2027.

Mobile Shelf Trolley

$353

Sold 26/04/2026

Skylarc Ref D176789

Mobile Shelf Trolley.
Laminated MDF shelves with 85mm high sides.
100mm diameter castors.

Toolshed Demolition Hammer

$350

Sold 26/04/2026

Skylarc Ref J176171

Unknown model
Single phase
4 x chisels
Case

Length of Large Steel Pipe

$343.56

Sold 26/04/2026

Skylarc Ref T176181

400mm OD x 4960mm long

Pallet Trolley

$335

Sold 26/04/2026

Skylarc Ref C177464

Jet brand
6000lbs capacity

Aluminum Ute Box

$335

Sold 26/04/2026

Skylarc Ref U177404

Gullwing doors
Steel frame
Off unknown vehicle
Locked with no keys

6x Cookes 3000kg Endless Round Slings, New

$333

Sold 26/04/2026

Skylarc Ref M175706

6x Cookes 3000kg Endless Round Slings.
3x are 3-metre length.
3x are 2-metre length.
All have 3000kg max weight capacities.
All are manufacturer tested 09/2025.
All are new unused.

Wood Dinning Table w/ 6x Chairs

$319.50

Sold 26/04/2026

Skylarc Ref M177188

Wood Dinning Table w/ 6x Chairs.
Unknown wood type.
6x black vinyl padded chairs each 470mm seat height, 450mm seat width, 990mm back height.
Generally mild edging and surface marks on table. Some wear to finish on chair wooden legs.

Heavy Duty Steel Trolley

$315

Sold 26/04/2026

Skylarc Ref L177473

Rear wheel steering
Plate steel construction

Oxy Acetylene Welding Setup

$315

Sold 26/04/2026

Skylarc Ref R177453

Heavy duty steel trolley
Oxygen and acetylene regulators
Cigweld 724 torch

2x Sturdy Welding Screen Frames

$315

Sold 26/04/2026

Skylarc Ref M176772

2x Sturdy Welding Screen Frames.
25x25mm box aluninium frames with 150x75mm channel alminium base feet.
Both fitted with red Welding Screens.
One tear in one screen.

Assorted Grinding Disks, Flaps, & More

$315

Sold 26/04/2026

Skylarc Ref S177168

Assorted Grinding Disks, Flaps, & More.
Includes:
- 2x s+g abrasives Ltd 178xM14 backup pads, New in packaging.
- 10x Egeli Ege-Flap 180x22.23mm flap disks Z40.
- 34x WeldFlex 9 Fibre Disks, 125mm x 22.23mm, 36g grit.
- 34x 180mm diameter Fibre Disks, unknown brand, type No.TS EN 13743, P-24 ZK.
- 25x BlueShark 125x1.0x22.23mm cut off Disks type A46TBF.

All items are as new leftover workshop Consumables stock.

Heavy Duty Steel Small Machine Stand

$311

Sold 26/04/2026

Skylarc Ref A176760

Heavy Duty Steel Small Machine Stand.
Top plate is 380x320x5mm.
Has a built in small storage cabinet below.
All steel construction.

Steel Worksite Tool Chest Toolbox

$311

Sold 26/04/2026

Skylarc Ref N176747

Steel Worksite Tool Chest Toolbox.
Includes the random contents seen in photos.
One lid brace needs fixing.

Oxy Acetylene Welding Setup

$310

Sold 26/04/2026

Skylarc Ref P177451

Heavy duty steel trolley
Oxygen and acetylene regulators
BOC Bluejet torch

Pair of Large Heavy Steel Sawhorses

$310

Sold 26/04/2026

Skylarc Ref G176740

Pair of Large Heavy Steel Sawhorses.
100x100mm box steel legs with 175x90mm I-beam top.
A very Heavy duty set.

Westinghouse 606L Fridge Freezer

$310

Sold 26/04/2026

Skylarc Ref A176708

Brand: Westinghouse
Model: WSE6100WA*7
Type: Side by side refrigerator freezer
Colour: White
Total gross capacity: 606L
Refrigerator gross capacity: 357L
Freezer gross capacity: 249L
Rated storage volume: 568L
Height cabinet: 1736mm
Height with door: 1754mm
Width cabinet: 890mm
Width with door: 898mm
Depth cabinet: 600mm
Depth with door: 737mm
Voltage: 220–240V
Frequency: 50Hz
Rated input power: 0.7A
Defrost power: 413W
Refrigerant: R134a charge 155g
Climate class: T
Insulation blowing gas: Pentane
Manufactured by Electrolux Home Products Pty Ltd
Made in Australia
Interior would benefit from a clean.
Previously used in a workshop lunchroom.

Tapmatic 50X Reversable Tapping Attachment

$310

Sold 26/04/2026

Skylarc Ref E177154

Tapmatic 50X Reversable Tapping Attachment.
capacity #6 - 1/2"
Has a Morse Tapper No.2 Shank

Heavy Plate Steel Workbench

$306

Sold 26/04/2026

Skylarc Ref N177449

7mm plate steel top
I-beam and box steel frame
Assorted steel offcuts

EWM TIg 300 Welding Torch

$305

Sold 26/04/2026

Skylarc Ref L176797

EWM TIg Welding Torch.
Part No.TIG 300 GD HD 8P 2T 4M.
Made in Germany.
Includes original box.
Item shows some mild usage, see photos.

Assorted Steel Letter & Number Punch Stamps

$305

Sold 26/04/2026

Skylarc Ref C176788

Assorted Steel Letter & Number Punch Stamps.
Sizes include 6mm, 7mm, 10mm.
Some sets are missing Stamps.
All are missing covers.

Assorted BlueShark 125mm Grinding & Cutting Disks

$300

Sold 26/04/2026

Skylarc Ref O176800

Assorted BlueShark 125mm Grinding & Cutting Disks.
Includes:
- 22x part No.A24RBF 125x6x22.23mm grinding disks with expiry dates of 03/2028.
- 35x part No.A36TRF 125x2.5x22.23mm disk, wirh expiry dates of 09/2026.
- 18x part No.A46TBF 125x1.0x22.23mm disks with expiry dates of 05/2028.

As new leftover workshop Consumables supply stock.

2x Sturdy Welding Screen Frames

$300

Sold 26/04/2026

Skylarc Ref U176754

2x Sturdy Welding Screen Frames.
25x25mm box aluninium frames with 150x75mm channel alminium base feet.
Both have black screens. Both screens have some holes in them.

Mobile Packaging Strapping Trolley w/ Contents

$300

Sold 26/04/2026

Skylarc Ref Y176732

Mobile Packaging Strapping Trolley w/ Contents.
500mm diameter strap spool holder.
Includes strapping ratchet and other itens seen on trolley.

Ullrich Aluminium.Extension Ladder

$293

Sold 26/04/2026

Skylarc Ref A176240

Ullrich Aluminium.Extension Ladder.
Made in New Zealand.
Length from 3650mm to 6000mm.
455mm width.

Heavy Duty Steel Trolley

$291

Sold 26/04/2026

Skylarc Ref B177489

Rear wheel steering
Plate steel construction

Europlan Steel Workshop Storage Cabinet

$286

Sold 26/04/2026

Skylarc Ref E176712

Europlan Steel Workshop Storage Cabinet.
Lockable, key is missing.
Includes the assorted Welding and grinding Consumables within Cabinet.

Ulrich Aluminum Ladder

$285

Sold 26/04/2026

Skylarc Ref L177499

A frame ladder height 1980mm
Unfolded length 3890mm

Ullrich Aluminium & Fibreglass Extension Ladder

$285

Sold 26/04/2026

Skylarc Ref L176745

Ullrich Aluminium & Fibreglass Extension Ladder.
315mm rug width on aluminium section.
Minimum height 3700mm.
Max height approx 7000mm.
Rusty steel parts.
One end of aluminium section has a slightly bent inwards rail.

3 x Steel Scrap Bins

$285

Sold 26/04/2026

Skylarc Ref I177418

940mm x 630mm x 500mm tall
1190mm x 920mm x 550mm tall
1280mm x 950mm x 560mm tall

Hilti Core Drill Stand DD-HD 30

$280

Sold 26/04/2026

Skylarc Ref K177160

Hilti Core Drill Stand DD-HD 30.
Dusty from storage.
Shows light use.
See manufacturer website below for further specs:
https://www.hilti.co.nz/c/CLS_POWER_TOOLS_7125/CLS_DIAMOND_CORING_7125/2148548?itemCode=2148548&salespackquantity=1%20pc&activeTab=preconfigured-kits-tabs

Assorted Fadtening Hardware w/ Heavy Steel Shelving Unit

$276

Sold 26/04/2026

Skylarc Ref Y177148

Assorted Fadtening Hardware.
Includes the Heavy Steel Shelving Unit made from 42x42mm welded angle steel and MDF boards.
Fastening hardware includes various bolts, anchors, bra keys, nuts and other related items.
Items are leftover unused workshop parts stock
Steel rack is a sturdy unit.

Room of Office Furniture

$270

Sold 26/04/2026

Skylarc Ref Y177174

Room of Office Furniture.
Auction includes:
- 2x 1800x800x720mm desks.
- 2x 1725x1200x710mm desks.
- 4x desk chairs.
- 650x650x810mm supplies cabinet with contents.
- mobile drawer unit.
- 800x300x810mm shelf.
- 4x A4 paper trays.

All other items and old files seen in photos are NOT included.

DeWalt Metal Cut Off Saw

$265

Sold 26/04/2026

Skylarc Ref S177480

Brand: DeWalt
Model: D28710-XE
Type: Metal cut-off saw
Blade diameter: 355mm (14 inch)
Arbor size: 25mm (1 inch)
Rated power: 2200W
Rated voltage: 230V~
Frequency: 50Hz
No load speed: 3800rpm
Type: 1
Includes installed abrasive chop saw wheel
Wheel marked Steel+Inox
Wheel size marking: 350 x 2.8mm
Fixed to metal stand with timber top
Saw includes integrated vise and clamp
Table 900mm x 430mm x 840mm

3-Phase 32A Power Extension Lead Cable

$260

Sold 26/04/2026

Skylarc Ref R176725

3-Phase 32A Power Extension Lead Cable.
Approx 12 metre length.
Note that the female plug is missing its cap.

3-Phase 32A Power Extension Lead Cable

$260

Sold 26/04/2026

Skylarc Ref D176711

3-Phase 32A Power Extension Lead Cable.
20-Metre length.

Heavy duty vehicle ramps

$251

Sold 26/04/2026

Skylarc Ref S177402

1750mm x 350mm x 400mm tall

Steel Table Workbench

$250

Sold 26/04/2026

Skylarc Ref Y176758

Steel Table Workbench.
50x50mm box steel frame with a 8mm plate steel top surface.

2x Sturdy Welding Screen Frames

$250

Sold 26/04/2026

Skylarc Ref T176753

2x Sturdy Welding Screen Frames.
25x25mm box aluninium frames with 150x75mm channel alminium base feet.
Both have black screens. Both screens have some holes in them.

3-Phase 32A Power Extension Lead Cable

$243

Sold 26/04/2026

Skylarc Ref N176721

3-Phase 32A Power Extension Lead Cable.
10 metre length.

Heavy Steel Frame Workbench

$237

Sold 26/04/2026

Skylarc Ref X176757

Heavy Steel Frame Workbench.
Frqme is made from various sizes of heavy box steel lengths up to 75x75mm.
MDF board top and lower surfaces.

2-Leg Lifting Chain Assembly, 4250kg Capacity

$230

Sold 26/04/2026

Skylarc Ref J175703

2-Leg Lifting Chain Assembly.
3150kg single leg Capacity, 4250kg 2-leg.
1.3m chain length.
10mm chain size.
Certification tag good till 02/2027

Steel Workbench

$230

Sold 26/04/2026

Skylarc Ref B177463

5mm steel top
Box steel frame

Dismantled Genie Lifter

$230

Sold 26/04/2026

Skylarc Ref F177415

Genie Superlift Advantage
Model SLA-15
Dismantled and in unknown condition

Assorted Workshop Material Support Stands

$226

Sold 26/04/2026

Skylarc Ref D176737

Assorted Workshop Material Support Stands.
A variety of designs and sizes, see photos.
Sturdy multi purpose units.

3-Phase 32A Power Extension Lead Cable

$225

Sold 26/04/2026

Skylarc Ref T176727

3-Phase 32A Power Extension Lead Cable.
Approx 12 metre length.

Metabo CS 23-355 Metal Cut Off Saw

$221

Sold 26/04/2026

Skylarc Ref I176170

Brand Metabo
Model CS 23-355
Rated voltage 240 V
Rated input power 2300 W
Frequency 50/60 Hz
Current 10.0 A
No load speed 4000 min-1
Disc diameter 355 mm
Bore size 25.4 mm
Power supply type corded electric
Fitted with STEEL+INOX cutting disc
Base includes integrated screw vise
Adjustable workpiece clamp on base

Steel Table Top

$215.50

Sold 26/04/2026

Skylarc Ref M176174

5mm steel workbench top
Frame underneath
Channel steel on ends

2x 2-Ton Capacity Beam Clamps

$215

Sold 26/04/2026

Skylarc Ref H175701

2x 2-Ton Capacity Beam Clamps.
Beam width capatibility from 75-220mm.
Both show light usage.

3-Phase 32A Power Extension Lead Cable

$215

Sold 26/04/2026

Skylarc Ref S176726

3-Phase 32A Power Extension Lead Cable.
Note that the female plug is missing its cap.
Approx 12 metre length.

Pipe Threading Set

$211

Sold 26/04/2026

Skylarc Ref T177429

Ratchet pipe threader kit
1/2", 3/4", 1", 1 1/4"
In case

3-Phase 32A Power Extension Lead Cable

$211

Sold 26/04/2026

Skylarc Ref P176723

3-Phase 32A Power Extension Lead Cable.
10-metre length.

BOC Smootharc Argon Regulators, As New

$207

Sold 26/04/2026

Skylarc Ref P177165

BOC Smootharc Argon Regulators.
45L/min
30,000kPa max inlet pressure.
Both appear as new unused but show dust from open box workshop storage.

Milwaukee Cordless M18 1/2" Drive Impact Wrench, Tool Only

$206.50

Sold 26/04/2026

Skylarc Ref E176790

Milwaukee Cordless M18 Fuel 1/2" Drive Impact Wrench.
Model No.M18 FIW2F12.
Auction includes tool only.
No battery in liquidated warehouse to use to test tool so operational condition is unknown.
Very dirty exterior.

Large Lot of Puller Parts

$205

Sold 26/04/2026

Skylarc Ref V177431

Mostly Sykes Pickavant brand
Various arms
Hydraulic puller
Bearing puller
And more

6x Rubber Anti Fatigue Floor Matts

$205

Sold 26/04/2026

Skylarc Ref I176742

6x Rubber Anti Fatigue Floor Matts.
Sizes include:
- 1x 1530x1030x18mm.
- 1x 1380x1060x18mm.
- 3x 1200x805x18mm.
- 1x 1510x905x8mm. This mat has a large rip in one corner, see photos.

13x Assorted Annular Cutters

$205

Sold 26/04/2026

Skylarc Ref T177195

13x Assorted Annular Cutters.
Includes the following sizes:
1x 10mm
3x 14mm
1x 16mm
6x 18mm
1x 24mm
1x 27mm
4x centre pin inserts.

Condition varies with each cutter.

Pair of Large Heavy Steel Sawhorses

$200.50

Sold 26/04/2026

Skylarc Ref H176741

Pair of Large Heavy Steel Sawhorses.
90x90mm box steel frames with 125x75x4mm box steel top beam.

Aluminium Mobile Bin Trolley

$200

Sold 26/04/2026

Skylarc Ref R176751

Aluminium Mobile Bin Trolley.
160mm diameter castors, front are swivel, rear are stationary.
Inner bin depth 460mm, Inner length 765mm at top, 695mm at bottom. Inner width 1120mm.
Front panel is slightly angled to assist in tipping out contents.
Some denting to aluninium edging on panels.

Ullrich Combination Step & Extension Ladder

$200

Sold 26/04/2026

Skylarc Ref Q176750

Ullrich Combination Step & Extension Ladder.
Made in New Zealand.
Model CS/07.
2.1m step ladder height.
3.90m extension height.
Trade rated 150kg max capacity.

Heavy Duty Steel Workbench

$199.50

Sold 26/04/2026

Skylarc Ref A177488

5mm plate steel top
Box steel frame
Reinforced underside

Cookes 1.6-ton Lever Block

$193.50

Sold 26/04/2026

Skylarc Ref N177163

Cookes 1.6-ton Lever Block.
Model 10047/60.
7.1x21mm chain size.
1.5 metre lift.
Certification tag expired 07/2025.

Makita Corded Die Grinder GD0810C

$193

Sold 26/04/2026

Skylarc Ref V177171

Makita Corded Die Grinder.
Model GD0810C.
Shows heavy wear and usage
Tool runs but not tested at length or under load.

Electric Infrared Heater

$190

Sold 26/04/2026

Skylarc Ref E177466

Electric Infrared Heater.
Unknown make it model
Includes remote (needs batteries)

Ullrich Combination Step / Extension Aluninium Ladder

$188

Sold 26/04/2026

Skylarc Ref D177179

Ullrich Combination Step / Extension Aluninium Ladder.
Made in New Zealand.
Step Ladder form height 1690mm.
Extension Ladder form length 2370mm.
150kg max weight capacity.

Large Workshop Trolley

$187

Sold 26/04/2026

Skylarc Ref W177458

Ply top with timber supports
Angle steel frame
Heavy duty castor wheels

2 x HIT Pullers

$184

Sold 26/04/2026

Skylarc Ref U177430

HIT GP-200
HIT GP-150

Arlec Electric Infrared Heater

$182

Sold 26/04/2026

Skylarc Ref F176765

Brand Arlec.
Model ROH403B.
990mm length.
Type electric instant infrared heater.
Rated power 2400W.
Voltage rating 220 to 240V AC 50Hz.
Class I appliance.
Ingress protection rating IP65.
Includes Arlec remote control.
Dusty from Workshop usage.

Low Mobile Platform Trolley

$176

Sold 26/04/2026

Skylarc Ref C176736

Low Mobile Platform Trolley.
Aluminium frames.
MDF top board.
125mm diameter castors with wheel locks.
Well used but rolls easily.

Hilti SDS Plus Rotary Hammer TE25

$171

Sold 26/04/2026

Skylarc Ref M176720

Hilti SDS Plus Rotary Hammer.
Model TE25.
Includes Keyless 13mm drill chuck attachment.
Includes plastic case.
Tool runs, see video, but not tested at length or under load.
Shows heavy wear and usage. Some damage to plastic case.

Hilti HST3 Wedge Anchors, 72x M16 Anchors

$171

Sold 26/04/2026

Skylarc Ref S177194

Hilti HST3 Wedge Anchors.
All are M16x170mm.
72x units in auction.
New unused workshop stock.

Hilti SDS Plus Rotary Hammer TE25

$170

Sold 26/04/2026

Skylarc Ref B176787

Hilti SDS Plus Rotary Hammer.
Model No. TE25
Includes plastic case.
Includes spare drill head attachment.
Tool runs, see video, but the power cord is damaged and will need replacing.

2x Sturdy Welding Screen Frames

$169

Sold 26/04/2026

Skylarc Ref V176755

2x Sturdy Welding Screen Frames.
25x25mm box aluninium frames with 150x75mm channel alminium base feet.
Both have black screens. Both screens have some holes in them.

Pair of Heavy Steel Sawhorses

$163

Sold 26/04/2026

Skylarc Ref D176763

Pair of Heavy Steel Sawhorses.
The matching pair are made from 90x90x6mm box steel lengths.
Each is 2000x1000x805mm.
Very heavy duty set.

Ryobi 12 Speed Bench Drill Press

$161

Sold 26/04/2026

Skylarc Ref H177443

Brand Ryobi.
Model BD12.
12 speed bench drill press.
Speed range 230 to 3480 RPM.
Three step pulley and belt drive system.
Column mounted on square base.
Round 220mm table
Table height adjustable on column.
On off switch on left side of head.
Keyed drill chuck fitted.
Chuck capacity marked 1.5 to 16mm.
Single phase
Goes but power switch won't stay on

Hayman NS4 Food Warmer Cabinet

$161

Sold 26/04/2026

Skylarc Ref Z176707

Brand Hayman
Model NS4.
Made by Henry Berry Ltd Hayman Division New Lynn Auckland New Zealand.
Serial number 696.
Rated power 950 watt.
Rated voltage 240 volt AC.
Single phase.
Stainless steel cabinet construction.
Front and rear sliding glass doors.
Rotary control knob on front right
Red indicator light is not working but the unit does heat up.
Internal surfaces show food residue and discoloration, would benefit from a cleanup.

Arlec Electric Infrared Heater

$159

Sold 26/04/2026

Skylarc Ref E176764

Brand Arlec.
Model ROH403B.
990mm length.
Type electric instant infrared heater.
Rated power 2400W.
Voltage rating 220 to 240V AC 50Hz.
Class I appliance.
Ingress protection rating IP65.
Includes Arlec remote control.
Dusty from Workshop usage.

Large Steel Workbench

$158

Sold 26/04/2026

Skylarc Ref C177438

2700mm x 1230mm top
6mm steel plate top
Sawhorse style legs

Multi Fold Aluminium Ladder

$158

Sold 26/04/2026

Skylarc Ref K176744

Multi Fold Aluminium Ladder.
Unknown manufacturer and model.
3900mm max length when fully opened.

2x AOC 24" IPS LCD Full HD Monitors

$158

Sold 26/04/2026

Skylarc Ref O177190

2x AOC 24" IPS LCD Full HD Monitors.
Both are model 24B2XH.
Both manufactured 10/2022.
Both include HDMI cables and power cords.
Shipping not available due to the fragility of the items.

2x Sturdy Welding Screen Frames

$157

Sold 26/04/2026

Skylarc Ref H176767

2x Sturdy Welding Screen Frames.
25x25mm box aluninium frames with 150x75mm channel alminium base feet.
One has a red screen with a few small holes.
Second has a black screen also with a few holes

Electric Infrared Heater

$156.50

Sold 26/04/2026

Skylarc Ref A177462

Electric Infrared Heater.
Unknown make it model
Includes remote (needs batteries)

Pallet Racking Frame

$156.50

Sold 26/04/2026

Skylarc Ref V177457

3 x uprights
4 x 2970mm crossbeams

Kito 1.5-ton Ratchet Lever Hoist

$156

Sold 26/04/2026

Skylarc Ref K175704

Kito 1.5-ton Ratchet Lever Hoist.
Made in Japan.
1500kg max capacity.
Certification tag good till 02/2027.

AOC 27" IPS LED Full HD Gaming Monitor

$156

Sold 26/04/2026

Skylarc Ref F177181

AOC 27" IPS LED Full HD Gaming Monitor.
Model No.27G2E5.
Manufactured 02/2021.
Includes power cord and HDMI cable.
Shipping not offered due to the fragility of the item.

Heavy Steel Flat Materials Trolley

$154

Sold 26/04/2026

Skylarc Ref N176773

Heavy Steel Flat Materials Trolley.
50x50x3mm box steel frame with 145mm diameter castors.
Top surfaces are two 900x150x10mm steel plate.

Arlec Electric Infrared Heater

$153

Sold 26/04/2026

Skylarc Ref F177467

Arlec Electric Infrared Heater.
Includes remote.

Arlec Electric Infrared Heater

$153

Sold 26/04/2026

Skylarc Ref D177465

Arlec Electric Infrared Heater.
Includes remote.

Hilti HST3 Wedge Anchors, 72x M16 Anchors

$153

Sold 26/04/2026

Skylarc Ref R177193

Hilti HST3 Wedge Anchors.
All are M16x170mm.
72x units in auction.
New unused workshop stock.

Pallet Racking and Contents

$152

Sold 26/04/2026

Skylarc Ref M177500

2 x 2440mm x 680mm uprights
4 x 2960mm long cross beams
Contents of packaging supplies

Single Leg Lifting Chain Assembly, 1600kg

$152

Sold 26/04/2026

Skylarc Ref I175702

Single Leg Lifting Chain Assembly.
1600kg max capacity.
1-metre chain length.
Certification tag good till 02/2027.

Pair of Heavy Steel Sawhorses

$152

Sold 26/04/2026

Skylarc Ref L176771

Pair of Heavy Steel Sawhorses.
Made from welded 90x90x6mm box steel lengths.
Each is 1860x995x1000mm.

Arlec Electric Infrared Heater

$151

Sold 26/04/2026

Skylarc Ref M176902

Brand Arlec.
Model ROH403B.
990mm length.
Type electric instant infrared heater.
Rated power 2400W.
Voltage rating 220 to 240V AC 50Hz.
Class I appliance.
Ingress protection rating IP65.
Includes Arlec remote control.
Dusty from Workshop usage.

2x HP 24" IPS LED Full HD Monitors

$151

Sold 26/04/2026

Skylarc Ref C177178

2x HP 24" IPS LED Full HD Monitors.
Both are model P24h G4.
Both manufactured 04/2020.
Both include power cables.
One has a HDMI to DisplayPort cable and the other has a D-sub cable.
Some dusty surfaces and cables, otherwise excellent condition overall.
Note that shipping is not offered due to the fragility of the items.

AOC 27" IPS LED Full HD Gaming Monitor

$151

Sold 26/04/2026

Skylarc Ref A177176

AOC 27" IPS LED Full HD Gaming Monitor.
Model No.27G2E5.
Manufactured 02/2021.
Includes power cord and DisplayPort cable.
Shipping not offered due to the fragility of the item.

12x Assorted 10A Power Extension Lead Cables

$151

Sold 26/04/2026

Skylarc Ref W177146

12x Assorted 10A Power Extension Lead Cables.
Variuos lengths.
All previously used in an industrial workshop.
Condition varies greatly with each cable.

Wall Mounted Parts Rack w/ Fastening Hardware Contents

$150

Sold 26/04/2026

Skylarc Ref B176709

Wall Mounted Parts Rack w/ Fastening Hardware Contents.
Plywood rack with various bins of bolts, screws, nuts, and more.
Buyer to bring tools to remove the rack from the wall.

AOC 27" IPS LED Full HD Monitor

$146.30

Sold 26/04/2026

Skylarc Ref E177180

AOC 27" IPS LED Full HD Monitor.
Model 27B2H.
Manufactured 01/2022.
Includes HDMI cable and power cord.
Note that shipping is not offered due to the fragility of the item.

2x Large Heavy Steel Sawhorses

$145

Sold 26/04/2026

Skylarc Ref I176768

2x Large Heavy Steel Sawhorses.
Heavy steel frames each h with a large 1820x200x200x10mm box steel length welded to the top.
Note that the rusty steel length seen resting on the sawhorses is NOT included.

Pair of Steel Sawhorses

$141

Sold 26/04/2026

Skylarc Ref R176777

Pair of Steel Sawhorses.
Each is 995x400x630mm.
40x40mm box steel legs, 100x50mm box steel top beam.
Matching heavy duty set.

Pair of Heavy Steel Sawhorses

$141

Sold 26/04/2026

Skylarc Ref B176761

Pair of Heavy Steel Sawhorses.
Made from 90x90x6mm box steel.
Each is 1485x830x940mm.

Large Powered Steel Welding Cupboard

$141

Sold 26/04/2026

Skylarc Ref W177432

Single phase heater mounted inside
3 shelves
Contents of part rolls of welding wire and steel plates
Lifting points

Large Tyre Sackbarrel 2-Wheel Gas Bottle Trolley

$139

Sold 26/04/2026

Skylarc Ref C176762

Large Tyre Sackbarrel 2-Wheel Gas Bottle Trolley.
400mm diameter tyres.
Lifting base frame 385x255mm.
Curved vertical frames 410mm wide for holding a gas bottle.
Tyres are currently firm but show cracking in rubber.

HP 27" IPS LCD Full HD Monitor N270h

$136

Sold 26/04/2026

Skylarc Ref N177189

HP 27" IPS LCD Full HD Monitor.
Model N270h.
Manufactured 01/2020.
HDMI and D-sub inputs.
Includes HDMI cable and power cord.
Some surface dust.
Shipping not available due to the fragility of the item.

4x Workshop Powerboards Power Extension Leads

$136

Sold 26/04/2026

Skylarc Ref F177155

4x Workshop Powerboards Power Extension Leads.
Three are PlugBoss branded and one is CordTech branded.
All show workshop wear and usage.

Cast Iron Engineering Table

$132

Sold 26/04/2026

Skylarc Ref W177484

Heavy cast table with angle steel frame

Ryobi HBD6MA 205mm Drill Press

$131

Sold 26/04/2026

Skylarc Ref X177459

Brand: Ryobi
Model: HBD6MA
Type: Bench drill press
Drill capacity: 205mm
Chuck capacity: 13mm
Motor power: 3 HP
Spindle speeds: 600 RPM, 900 RPM, 1250 RPM, 1750 RPM, 2500 RPM
Speed selection via belt and pulley system
Tilting work table with T-slots
50mm spindle travel

2x Samsung IPS LED Full HD Monitors

$131

Sold 26/04/2026

Skylarc Ref K177186

2x Samsung IPS LED Full HD Monitors.
Both are model 24R350FZE.
Both manufactured 12/2022.
Both include HDMI cables and power cords.
Shipping not available due to the fragility of the items.

50mm Annular Cutter by FE Power Tools, New

$131

Sold 26/04/2026

Skylarc Ref U177144

50mm Annular Cutter by FE Power Tools.
65mm total cutter length including mounting shank.
Cutter is new never used.

Philips 27" LED Full HD Monitor

$127

Sold 26/04/2026

Skylarc Ref B177177

Philips 27" LED Full HD Monitor.
Model 273V5Q
Manufactured 11/2013.
HDMI, DVI, D-sub video inputs ports.
Includes power cord and DVI cable.
Some surface dust on monitor and Cabling, otherwise excellent overall condition.
Note that shipping is not offered due to the fragility of the item.

https://www.philips.co.nz/c-p/273V5QHAB_75/lcd-monitor-with-led-backlight

300mm Fume Extractor Fan

$125

Sold 26/04/2026

Skylarc Ref U176780

300mm Fume Extractor Fan.
380mm long, 330mm outer diameter.
Model TSVE3 ventilation fan.
Size 300mm 12 inch.
Rated voltage 230V.
Power rating 520W.
Frequency 50 60Hz.
Speed 2800 3300 r min.
Air delivery 65 m³ min.
Wind pressure 375 Pa.
Metal cylindrical housing.
Some denting to rims.
See video for operatiion.

2 x Surveyors Tripods

$125

Sold 26/04/2026

Skylarc Ref D176165

Leica Global Survey
One unbranded

Assorted Stands

$123

Sold 26/04/2026

Skylarc Ref F176167

5 x jack stands

Pair of Heavy Steel Sawhorses

$122

Sold 26/04/2026

Skylarc Ref W176756

Pair of Heavy Steel Sawhorses.
The matching pair are made from 90x90x6mm box steel lengths.
Each is 1485x620x805mm.
Very heavy duty set.

Digitech 600A True RMS AC/DC Clampmeter

$122

Sold 26/04/2026

Skylarc Ref G176714

Digitech 600A True RMS AC/DC Clampmeter.
Model No.QM-1632.
New unused tool, unpackaged and turned on for photos only.

Whirlpool Talent Family Microwave Oven, Swedish made

$122

Sold 26/04/2026

Skylarc Ref Y176706

Brand: Whirlpool.
Model: 6MT 42/WH.
Series: Talent Family.
Type: countertop microwave oven.
Power supply: 230–240 V AC.
Frequency: 50 Hz.
Input power: 2400 W.
Microwave output power: 800 W (IEC 705).
Magnetron frequency: 2450 ± 50 MHz.
Made in Sweden.
Front control panel with digital display.
Glass turntable inside.
White exterior housing.
Door opens downward.

Steel Shelving Assembly

$122

Sold 26/04/2026

Skylarc Ref L177187

Steel Shelving Assembly.
Adjustable shelves.
Self supporting.
Blue and Black finish.

Pair of Steel Sawhorses

$121.10

Sold 26/04/2026

Skylarc Ref P176749

Pair of Steel Sawhorses.
Each with 40x40mm box steel legs with 65x65mm box steel top beam.
Each is approx 1590x830x790mm.

3x Standard Tables w/ 14x Stacking Chairs

$121

Sold 26/04/2026

Skylarc Ref N176903

3x Standard Tables w/ 14x Stacking Chairs.
Two tables are 1790x800x760mm.
Third table is 1375x800x760mm.
14x stacking chairs, all but one with black vinyl padded seats and backs, one with dark blue vinyl.
Previously used in a workshop lunchroom.

ArcForce Portable Wrldung Electrode Dryer YCH-5

$121

Sold 26/04/2026

Skylarc Ref F176791

ArcForce Portable Wrldung Electrode Dryer.
Model YCH-5.
Primary supply 240 volts 50 or 60 Hz
Temperature control range 50°C to 200°C
Holding capacity 5 kg
Heating capacity 210 W
Interior approx 90mm diameter, 440mm long.

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$121

Sold 26/04/2026

Skylarc Ref X176705

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$121

Sold 26/04/2026

Skylarc Ref W177198

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.
Photos are indicative.

Pair of Heavy Steel Sawhorses

$116.78

Sold 26/04/2026

Skylarc Ref S176778

Pair of Heavy Steel Sawhorses.
The matching pair are made from 90x90x6mm box steel lengths.
Each is 2000x1000x805mm.
Very heavy duty set.

Retractable Wall Mount Air Hose Reel

$111

Sold 26/04/2026

Skylarc Ref O176774

Retractable Wall Mount Air Hose Reel.
Note that a blue and yellow hose has been spliced together to make one length with a Coupling, see photos.
Incomplete wall mount, buyer will need to make their own mount to hang this unit.

Lever Block

$111

Sold 26/04/2026

Skylarc Ref L177161

Lever Block.
ID label is worn so brand and capacities are unknown.
Tag attached stating for pulling use only.

11x PFERD 350mm Steelox Cut-off Disks

$110.20

Sold 26/04/2026

Skylarc Ref K176796

11x PFERD 350mm Steelox Cut-off Disks.
Made in Germany.
Size 350x2.8x25.4mm.
80 T 350-2.8 K SG Chop Steelox.
Expiry dates of 01/2026.
As new unused workshop Consumables stock
11x disks in auction.

Small Steel Table

$109

Sold 26/04/2026

Skylarc Ref G177468

3mm steel top
Heavy duty steel frame
Contents of steel offcuts

Workshop Trolley and Contents of Steel

$105

Sold 26/04/2026

Skylarc Ref K177472

MDF top
Steel frame
Contents of assorted steel offcuts

Arlec Electric Infrared Heater

$102

Sold 26/04/2026

Skylarc Ref U176728

Brand Arlec.
Model ROH403B.
990mm length.
Type electric instant infrared heater.
Rated power 2400W.
Voltage rating 220 to 240V AC 50Hz.
Class I appliance.
Ingress protection rating IP65.
Note that this unit is missing its remote control.
Dusty from Workshop usage.

Hilti HLS4 Heavy Duty Wedge Anchors, 87x M12 units

$102

Sold 26/04/2026

Skylarc Ref W176704

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 87x M12 units in auction.
New unused stock.

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$102

Sold 26/04/2026

Skylarc Ref X177199

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.
Photos are indicative.

Steel Scrap Bin

$101

Sold 26/04/2026

Skylarc Ref H177417

With lifting points

Siframo Parts and Various Fittings

$100

Sold 26/04/2026

Skylarc Ref L176173

Large box of Siframo bases with 100mm square bases and 70mm stems
Large box is Siframo bases with 120mm bases and 90mm stems
Box of 90mm sections
Various unknown steel lengths
Box of plate brackets

Karcher NT 35/1 Tact Te Vacuum Cleaner Shop Vac

$99

Sold 26/04/2026

Skylarc Ref S177142

Brand: Karcher
Model: NT 35/1 Tact Te
Type: Professional vacuum cleaner.
Power rating: 1200W
Voltage: 220-240V 1 phase 50/60Hz
Labelled max with socket: 2300W
Labelled max: 1100W or 4.7A.
Labelled min: 100W.
Ingress protection rating: IPX4.
Weight on label: 12.5kg.
Year of manufacture: 2015.
Country of manufacture: Made in Italy.
Serial number: 057159.
The unit shows heavy industrial workshop wear and usage. It seems to operate but not tested at length.
All hose attachments are missing.

BOC Smootharc 309LSi Stainless Steel MIG Wire

$96.50

Sold 26/04/2026

Skylarc Ref A177436

Brand BOC
Model Smootharc Stainless Steel MIG Wire
Classification AWS ASME-SFA A5.9 ER309LSi
Classification AS NZS ISO 14343-B SS309LSi
Part number 1093095
Size 0.90mm
Weight 5.00kg
Heat number 73777
Lot number 322837

5x Annular Cutters

$92

Sold 26/04/2026

Skylarc Ref A177150

5x Annular Cutters.
Sizes include 14mm (2x), 15mm, 22mm (2x).

Small but Sturdy Steel Shelf Trolley

$91

Sold 26/04/2026

Skylarc Ref A176734

Small but Sturdy Steel Shelf Trolley.
25mm steel pipe corners with 5mm steel surfaces with low sides.
50mm diameter castors.
Total length including push handle 630mm.
A small but solidly built little trolley.

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$91

Sold 26/04/2026

Skylarc Ref T176701

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.
Photos are indicative.

Veon 39.5" LED TV Television w/ Built-in DVD Player

$90

Sold 26/04/2026

Skylarc Ref I177184

Veon 39.5" LED TV Television w/ Built in DVD Player.
Model No. V39FHDC.
Include remote, power cord, and HDMI cable.
Remote has no batteries so unable to turn in TV.
Dusty back panel of TV.
Includes wall mount only, base mount is missing.

Bosch Corded 125mm Angle Grinder GWS 1400 C

$89

Sold 26/04/2026

Skylarc Ref X176783

Bosch Corded 125mm Angle Grinder.
Model GWS 1400 C.
Includes side handle.
Disk changing tool is missing.
Tool runs, see video, but not tested at length or under load. Tool shows heavy workshop usage. Top piece of front metal housing is missing, see photo. Some black tape over power cord.
See the manufacturer website below for further specs:
https://www.bosch-pt.co.nz/nz/en/products/gws-1400-c-125-mm-0601824241

3-Phase Power Extension Lead Cable

$89

Sold 26/04/2026

Skylarc Ref O176722

3-Phase Power Extension Lead Cable.
Unsure as to what amperage this Cable is as the female plug is missing its cap where the labeling usually is and the labeling on the male plug is worn, see photos.
Male plug outer diameter 52mm. The male plug is smaller than the female plug so this setsup possibly could be a 20A male to 32A female?
4-metre Cable length.

Assorted 3/4" Drive Sockets, Imperial & Metric Sizes

$89

Sold 26/04/2026

Skylarc Ref Q177166

Assorted 3/4" Drive Sockets, Imperial & Metric Sizes.
Sizes from 7/8" and 22mm to 2" and 50mm.
Heavily dented steel case.
Socket Wrenches are missing.

8x Hilti SDS Plus Hollow Masonary Concrete Drill Bits

$87.50

Sold 26/04/2026

Skylarc Ref A176786

8x Hilti SDS Plus Hollow Masonary Concrete Drill Bits.
Sizes include:
- 5x M12 x 330mm.
- 1x M16 x 370mm.
- 2x M18 x 370mm.

Condition varies greatly with each bit. One M18 bit is as new unused.

Toolshed Electric Drill Bit Sharpener

$87

Sold 26/04/2026

Skylarc Ref J176717

Toolshed Electric Drill Bit Sharpener.
Model TSDBS.
Runs but not tested under load.

Heavy Duty Steel DG Cabinet

$86.50

Sold 26/04/2026

Skylarc Ref A177410

Lockable but no key
Dangerous goods cabinet
3 shelves
Steel box inside

Heavy Duty Workshop Shelving Unit

$86.50

Sold 26/04/2026

Skylarc Ref W177172

Heavy Duty Workshop Shelving Unit.
42x42mm welded steel frame.
MDF board surfaces.

Office Desk, Tall Chair, Mobile, 2x 4-Drawer File Cabinets

$86

Sold 26/04/2026

Skylarc Ref H177183

Assorted Office Furniture including:
- Office Corner desk 1800x1200x730mm, currently mounted on two heavy 350mm tall I-beams.
- Mobile tall adjustable desk chair.
- Blue steel 4-drawer file cabinet
- white laminated MDF 4-drawr file cabinet.
- Blue Mobile drawer unit.

Other items seen in room are not included.

Pair of Steel/wood Sawhorses

$83.50

Sold 26/04/2026

Skylarc Ref Q176776

Pair of Steel/wood Sawhorses.
25x25mm box steel legs.
90mm wide wood board top beam with channel steel base underneath.
Both measure 800x480x790mm.
Both painted in grey.
Sturdy build.

Bosch Corded 125mm Angle Grinder GWS 1400 C

$83

Sold 26/04/2026

Skylarc Ref Y176784

Bosch Corded 125mm Angle Grinder.
Model GWS 1400 C.
Includes side handle.
Disk changing tool is missing.
Tool runs, see video, but not tested at length or under load.
See the manufacturer website below for further specs:
https://www.bosch-pt.co.nz/nz/en/products/gws-1400-c-125-mm-0601824241

Heavy Steel Small Machine Mount or Table

$83

Sold 26/04/2026

Skylarc Ref P176775

Heavy Steel Small Machine Mount or Table.
50x50mm box steel frame.
10mm plate steel top.

Mobile Safety / Fire Extinguisher Trolley

$82.50

Sold 26/04/2026

Skylarc Ref V176729

Mobile Safety / Fire Extinguisher Trolley.
Mounts for a fire extinguisher and first aid kit on back frame.
See photos for further design details

Laser Leveling Kit

$81

Sold 26/04/2026

Skylarc Ref H176793

Laser Leveling Kit.
Medalist branded.
400mm bubble level with laser at one end.
Includes mounting base, tripod, safety goggles pladtic case.
Dusty from open storage.
Case missing a latch.

Veon 48" LED TV Television

$81

Sold 26/04/2026

Skylarc Ref I177158

Veon 48" LED TV Television.
Model No.V48FHD.
Manufactured 09/2914.
Includes remote and power cord.
Dusty surfaces.
Includes wall mount only, no base mount included.
Remote batteries depleted so unable to test.

Steel Cabinet on Wheels

$80.50

Sold 26/04/2026

Skylarc Ref H177469

Cabinet with swing front door
Sliding door compartment on side
Aluminum top
On wheels

Pair of Steel/wood Sawhorses

$80

Sold 26/04/2026

Skylarc Ref G176766

Pair of Steel/wood Sawhorses.
25x25mm box steel legs.
90mm wide wood board top beam with channel steel base underneath.
Both measure 800x480x790mm.
Both painted in grey.
Sturdy build.

Pair of Welding Screen Frames

$77.50

Sold 26/04/2026

Skylarc Ref K176770

Pair of Welding Screen Frames.
25x25mm box steel frames.
One frame is 1160x625x1820mm with sheet steel panel.
Second frame is 1230x620x1880mm with green Welding Screen. Note that the screen has many holes and tears

Bosch Corded 125mm Angle Grinder GWS 1400 C

$77

Sold 26/04/2026

Skylarc Ref Z176785

Bosch Corded 125mm Angle Grinder.
Model GWS 1400 C.
Includes side handle.
Disk changing tool is missing.
Tool runs, see video, but not tested at length or under load. Tool shows heavy workshop usage.
See the manufacturer website below for further specs:
https://www.bosch-pt.co.nz/nz/en/products/gws-1400-c-125-mm-0601824241

Heavy Duty Steel Trestles

$76.85

Sold 26/04/2026

Skylarc Ref M176200

1500mm x 1000mm x 830mm tall
Plate steel frame

Bosch Corded 125mm Angle Grinder GWS 1400 C

$75

Sold 26/04/2026

Skylarc Ref W176782

Bosch Corded 125mm Angle Grinder.
Model GWS 1400 C.
Includes side handle.
Disk changing tool is missing.
Tool runs, see video, but not tested at length or under load. Tool shows heavy workshop usage.
See the manufacturer website below for further specs:
https://www.bosch-pt.co.nz/nz/en/products/gws-1400-c-125-mm-0601824241

Large Adjustable Wrench, 24" / 600mm size

$75

Sold 26/04/2026

Skylarc Ref O177164

Large Adjustable Wrench.
24" / 600mm size.
Unknown msnufacturer.

Assorted Kitchen Small Appliances

$73

Sold 26/04/2026

Skylarc Ref U177196

Assorted Kitchen Small Appliances.
Includes:
- Lining & Co. microwave.
- LG microwave
- Russell Hobbs sandwich press.
- Breville Toaster
- Breville benchtop convection oven

All items previously used in a workshop lunchroom. Condition varies with each unit.

Makita Corded 125mm Angle Grinder

$72

Sold 26/04/2026

Skylarc Ref F176713

Makita Corded 125mm Angle Grinder.
Model No.GA5030.
Includes side handle.
Disk changing tool is missing.
Tool runs but not tested at length or under load.

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$72

Sold 26/04/2026

Skylarc Ref Y177200

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.
Photos are indicative.

120mm Milling / Drilling Vice

$71

Sold 26/04/2026

Skylarc Ref C177152

120mm Milling / Drilling Vice.
120mm wide jaws.
Opens to 120mm.
Mounting base 220x180mm.

Assorted Welding Regulators

$71

Sold 26/04/2026

Skylarc Ref V177145

Assorted Welding Regulators.
20+ well used units.
Dusty from Workshop storage.
Opwrationall conditions are unknown.

Large Workbench

$70

Sold 26/04/2026

Skylarc Ref T177455

Steel frame
Timber top with ply overlay
Drawer and cupboard
1180mm x 560mm x 5mm steel plate on end

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$70

Sold 26/04/2026

Skylarc Ref V176703

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.
Photos are indicative.

MagMate Mild Steel MIG Wire 0.6mm 15kg

$69

Sold 26/04/2026

Skylarc Ref Z177435

Brand MagMate
Product Mild Steel MIG Wire
Standard AWS ASME SFA A5.18 ER70S-6
Standard AS NZS 14341 B-G 49A 3U C S6 B-G 49A 3U M S6
Part number 706B06-1
Wire diameter 0.6mm
Spool weight 15kg

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$69

Sold 26/04/2026

Skylarc Ref V177197

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.
Photos are indicative.

Steel Frames

$68.50

Sold 26/04/2026

Skylarc Ref V177405

2 x 1420mm x 1250mm x 1850mm tall on wheels
1400mm x 460mm x 1450mm tall triangle frame
880mm x 1930mm x 420mm tall rectangular frame

3x Aluninium Frame Welding Screens

$63

Sold 26/04/2026

Skylarc Ref S176752

3x Aluninium Frame Welding Screens.
One frame is 1900x630x2210mm.
Two frames are 1300x800x2230mm.
All have red screens installed.
All screens have holes and tears in them.

2x 13mm Keyed Drill Chucks

$63

Sold 26/04/2026

Skylarc Ref B177151

2x 13mm Keyed Drill Chucks.
Includes a Ruko 13mm chuck with 19mm diameter, 22mm long mounting shank.
Includes 13mm Keyed chuck with key with a 34mm outer diameter shank with a 20mm bore.
See photos for further shank type details.
Both chuck show light usage. One is missing key.

Assorted Esko Tuff-Sheild Browguard Face Protectors & More

$61

Sold 26/04/2026

Skylarc Ref C176710

Assorted Esko Tuff-Sheild Browguard Face Protectors.
Also includes three other brands of browguards plus one welding mask.
See photos for included items and their condition.
Condition varies with each unit.

Hilti HLS4 Heavy Duty Wedge Anchors, 60x M12 units

$61

Sold 26/04/2026

Skylarc Ref U176702

Hilti HLS4 Heavy Duty Wedge Anchors.
111mm length.
A total of 60x M12 units in boxes of 20x anchors per box.
New unused stock.
Photos are indicative.

Gas bottle trolley

$60

Sold 26/04/2026

Skylarc Ref S177454

Rex Industrial Equipment
200kg rating
Solid tyres

Standard Office Desk w/ Chair

$60

Sold 26/04/2026

Skylarc Ref J177185

Standard Office Desk w/ Chair.
Laminated MDF desk construction.
Mobile chair with adjustsble height.
Desk in generally very good condition.
Chair shows more moderate wear.on armrests and vinyl surfaces.

5x Plastic Workshop Step Stools

$57

Sold 26/04/2026

Skylarc Ref Z176733

5x Plastic Workshop Step Stools.
Each is approx 500x500x360mm.
Aluminium top 390x390mm.
Some have corner cracks/damage, see photos

Large Lot of Coveralls

$56

Sold 26/04/2026

Skylarc Ref G176168

20 individual packaged coveralls
Brand includes Kimberly-Clark Professional KleenGuard
Model includes KleenGuard A20 Coveralls White
Some packs marked KleenGuard A20 plus
Brand includes Lakeland Industries Inc
Lakeland model SAFEGard limited use protective clothing

Hilti HST3 Wedge Anchors, 48x M16 Anchors

$54

Sold 26/04/2026

Skylarc Ref Q177192

Hilti HST3 Wedge Anchors.
All are M16x170mm.
48x total units in auction. 24x are new in sealed boxes, 12x more are new in opened box, and 12x more are missing their washer & nuts.

SRC 56 Air Rivet Gun

$52.78

Sold 26/04/2026

Skylarc Ref H177157

SRC 56 Air Rivet Gun.
Item is untested.

16mm Keyed Drill Chuck w/ Morse Taper No.3 Shank

$52.50

Sold 26/04/2026

Skylarc Ref R177167

16mm Keyed Drill Chuck w/ Morse Taper No.3 Shank.
Key is included.

Mobile Large Rolled Material Trolley

$52

Sold 26/04/2026

Skylarc Ref M176746

Mobile Large Rolled Material Trolley.
40x50mm box steel frame.
150mm diameter castors.
Two bars for hanging large rolls of material up to 1710mm wide, 600mm diameter.
Max weight capacity of trolley/bars is unknown.
Castors do not have wheel locks.

BOC SmoothCor 711 Bright Welding Wire 1.2mm 15kg

$51

Sold 26/04/2026

Skylarc Ref B177437

Brand BOC.
Product SmoothCor 711 Bright welding wire.
Size 1.2mm.
Weight 15kg.
Batch number F71LFHB001241.
Part number 1071112-B.
Gas classifications ISO 14175 M21 and ISO 14175 C1.
Current DC+.
AWS ASME SFA A5.36M classifications E491T1-M21 A3 CS1 H8 and E491T1-C1 A3 CS1 H8.
AS NZS ISO 17632 classifications B-T 49 3 T1-1 M21 A U H10 and B-T 49 3 T1-1 C1 A U H5.

2x Steel Sawhorses

$51

Sold 26/04/2026

Skylarc Ref J176743

2x Steel Sawhorses.
40x40mm box steel legs and 80x50mm box steel top beam.
Each is approx 1200x820mm. One is 800mm tall and the other is 815mm tall.
Note that one unit has a 230mm long 150x100mm box steel length spot welded to its top. A simple angle grinder job will take it off.

2x Modetn Office Tables w/ 2x desk chairs

$51

Sold 26/04/2026

Skylarc Ref X177173

2x Modetn Office Tables w/ 2x desk chairs.
Includes:
- 1800x800x725mm newer office tables in white laminated tops with light grey metal frames.
- 2x slightly older mobile deak chairs.

Chairs show a bit more usage than the desks.

Portable Ventilator Fan, won't turn on

$50

Sold 26/04/2026

Skylarc Ref T176779

Model JY3-SF 12"
Portable ventilator fan.
Voltage rating 220-240V.
Power rating 550W.
Single phase.
Frequency 50Hz.
Speed 2900 r per min.
Flow rate 62 cubic metres per minute.
Static pressure 350Pa.
On off toggle switch mounted under handle.
Fitted with three pin plug as shown.
Electrical test tag on cord dated 30 8 25.
Test tag due date marked 30 2 26.

Unable to get fan to run, the on/off switch has no "click" when moving it, suspecting a faulty switch but cannot verify.
Some denting to outer rims.
345mm long, 345mm diameter.

3x Hilti SDS & SDS Plus Drill Bits

$43

Sold 26/04/2026

Skylarc Ref X177147

3x Hilti SDS & SDS Plus Drill Bits.
Includes:
- 920mm long 25mm SDS drill.
- 920mm long 22mm SDS drill with case.
- 370mm 16mm SDS Plus drill.

Condition varies greatly with each unit.

BOC SmoothCor 8 Welding Wire 1.6mm 15kg

$41.76

Sold 26/04/2026

Skylarc Ref Y177434

Brand BOC
Model SmoothCor 8
Part number 100816
Wire classification AWS ASME SFA A5.20 E71T-8
Standard AS NZS ISO 17632 B T 49 3 T8-1 NA H15
Wire diameter 1.6 mm
Spool weight 15 kg
Flux cored welding wire on metal spool

Challenger 1.6-ton Lever Block, Faulty

$41

Sold 26/04/2026

Skylarc Ref M177162

Challenger 1.6-ton Lever Block.
1.5 metre lift.
7.1x21mm chsin size.
Warning tag attached stating not for lifting. Both hooks missing safety levers.
Unknown what if any other faults.

Goldair 425W Panel Heater

$37

Sold 26/04/2026

Skylarc Ref G177156

Goldair 425W Panel Heater.
Model No.GGP200B.
Remote is missing.

4x Corded Drills all with faulty chucks

$35

Sold 26/04/2026

Skylarc Ref T177169

4x Corded Drills.
All drills run ok but all have faulty chucks.
Includes:
- Makita Angle Drill model DA3010F with 10mm Keyed chuck.
- Makita drill model 6408 with 10mm Keyless chuck.
- Metabo drill model SBE750 with 13mm Keyless chuck.
- Hitachi drill model.D13 with 13mm Keyed chuck.

All show industrial wear and usage. As stated, all motors run generally ok for their level of use, but all have Chucks that need repair or replacing.

Heavy Duty Steel Trestles

$34.50

Sold 26/04/2026

Skylarc Ref R177401

1240mm x 1000mm x 830mm tall
Plate steel frame

Mobile Workshop Shelf / Parts Trolley

$33.50

Sold 26/04/2026

Skylarc Ref X176731

Mobile Workshop Shelf / Parts Trolley.
MDF construction.
80mm diameter castors.
Lower shelves.
Top is divided into smaller bins for storing parts or tools.
Buyer can have the few clamps dispenser on trolley as well.
Seems relatively sturdy for a custom trolley made from MDF...

4 x Broken Welders

$31

Sold 26/04/2026

Skylarc Ref B176163

Strata Eziarc 165
Wia Weldarc 180i
Cebora Power Rod 1565
Dyna-Stud 6
All faulty

3x Assorted LCD / LED Monitors

$25.07

Sold 26/04/2026

Skylarc Ref Z177175

3x Assorted LCD / LED Monitors.
Includes:
- Acer 24" LCD model V246HL, manufactured 01/2015.
- AOC 20" LCD model 2036Va, manufactured 08/2009.
- Samsung 24" LCD model 2494SW, manufactured 03/2010.

All include power cables. Two have D-sub video cables and one has DVI cable.
Dusty surfaces.
Shipping not offered due to the fragility of the items.

Timber Workshop Cabinet

$17

Sold 26/04/2026

Skylarc Ref S177428

Timber two door cabinet
Contents of broken electric motor
Various tools

MagMate Mild Steel MIG Wire 1.2mm 15kg Spool

$13

Sold 26/04/2026

Skylarc Ref X177433

Brand MagMate
Product type mild steel MIG wire
Wire size 1.2 mm
Spool weight 15 kg
Part number 706B12-1
Standard AWS ASME SFA A5.18 ER70S-6
Standard AS NZS 14341-B G 49A 3U C S6
Standard AS NZS 14341-B G 49A 3U M S6

Arges Power Tools Corded Drill

$11.50

Sold 26/04/2026

Skylarc Ref U177170

Arges Power Tools Corded Drill.
Model HDA114.
13mm Keyed chuck, key is missing.
Drill runs but not tested at length or under load
Shows industrial wear snd usage.

2x Modern Office Desks

$10.50

Sold 26/04/2026

Skylarc Ref Z177149

2x Modern Office Desks.
Both have white laminated tops with light grey metal legs and frames.
Corner desk is 1800x1800x735mm.
Straight deak is 1800x800x720mm with an upper 770x290mm file/book shelf 215mm above desk top.
Both desks need a good surface cleanup, see photos.

Office Desk, Chair, 4-Drawer File Cabinet, Paper Tray

$2

Sold 26/04/2026

Skylarc Ref G177182

Assorted Office Furniture including:
- 1500x800x730mm Office desk.
- Precision 4-drawer file cabinet
- Desk chair.
- A4 paper tray.

Assorted Children's Chairs

$1

Sold 26/04/2026

Skylarc Ref Q177426

8 assorted children's wooden chairs

Morgan Electric Hydraulic Tilt Furnace

$0

Sold 29/04/2026

Skylarc Ref E176634

Manufacturer Molten Metal Products Ltd
Model ERBT150
Morgan MKV ERBT150 electric heated hydraulic tilt furnace
Serial number 1532
Rated voltage 400V
Frequency 50Hz
Three phase supply
Rated current 70A
Rated power 42kW electric
Duty cycle 100%
Includes separate Morgan control panel
Control panel fitted with Eurotherm temperature controller
Furnace fitted with hydraulic tilting mechanism
Includes foot pedal marked raise and lower
Furnace lid with mechanical lever mechanism
Includes new crucibles in boxes
Rarely available late model machine
Buyer to decommission