SKYLARC'S INDUSTRIAL PLANT AND MACHINERY AUCTION

CNC Hydraulic Pipe Bending Machine by Tradeworks

Skylarc Ref I175624

Length

6000mm

Width

1200mm

Height

1350mm

Brand: Tradeworkz International
Type: CNC Hydraulic Pipe Bending Machine.
Model: JG-89CNC-3A-1S.
Working voltage: 415V 50Hz 3 phase.
32A 4-pin power plug.
Origin: Made in China.
Serial number: 1905181..
Nameplate date: 2011-05-18.
Max bending pipe diameter x thickness: 89mm x 3.0mm.
Minimum bending radius: 40mm.
Machine includes separate control pedestal with touch screen display.
Control pedestal fitted with start and emergency stop push buttons.
Machine supplied with three pallets of steel tooling and formers as shown.
You will need a hiab or similar to load this machine

2017 OTC FD-V6L Welding Robot with WB-M400 Power Source

Skylarc Ref I177548

Length

4500mm

Width

1900mm

Height

2900mm

OTC FD-V6L industrial robot arm manufactured 2017
OTC FD11 robot controller.
OTC Daihen WB-M400 DC welding power source.
WB-M400 rated output current up to 400 A.
OTC Daihen wire feeder model AF-4012.
OTC Daihen DC gear motor on wire feeder.
Robot arm fitted with MIG welding torch.
Teach pendant
Robot system includes separate start stop control station with emergency stop.
Multiple safety cage panels and frames included
Interconnecting cables and hoses included as shown.
Tidy machine straight out of work

Luxcut Single Phase Milling Machine

Skylarc Ref M176070

Length

1280mm

Width

1650mm

Height

2200mm

Luxcut turret milling machine.
Model 8A-1.
Serial number 060598.
Low range spindle speeds 80 135 210 325 160 270 420 650 rpm.
High range spindle speeds 660 1110 1750 2720 1320 2220 3500 5440 rpm.
1240mm x 230mm table
5" spindle travel
Table fitted with leadscrew and handwheel for longitudinal feed.
R8 spindle taper
Machine fitted with DRO unit Sino SDS2MS for X and Y axes.
Motor rated 2 hp 1.5 kW.
Motor rated speed 1430 rpm.
Power feed attachment present on X axis
Right angle milling attachment present on table.
Range of R8 tool holders

2026 Tandem Axile Flat Deck Trailer

Skylarc Ref R177037

Length

6150mm

Width

1910mm

Height

1420mm

2026 Tandem Axile Flat Deck Trailer.
Rego good till 17/03/2027.
WOF good till 18/03/2029.
Made in New Zealand.
Galvanized steel frame.
20mm thick plywood deck and side panels.
3100mm long draw bar with 2000kg rated 1 7/8" ball hitch.
Spare tyre mount on drawer bar (spare tyre not included).
Folding front jockey wheel assembly.
Deck with sides up is 2930x1850mm and 790mm above ground.
300mm high side and rear panels.
595mm high front panel.
All panels fold downward, increasing Deck area to approx 3700x1900mm.
4x Tianfu RD-220 trailer tyres size 165R13LT.
LED rear lights.
7-pin electrical plug at front hitch.

Atlas Copco GA26+ Rotary Screw Air Compressor

Skylarc Ref Y175458

Length

1255mm

Width

865mm

Height

1480mm

Atlas Copco GA26+ Rotary Screw Air Compressor.
Type No.GA26P.
Manufactured in 2009.
Runtime hours unknown.
525kg.
P max 8.5 bar, 123psi.
Qv 76.2 l/s, 161.5 cfm.
26kW 3-phase motor.
Running unit straight out of work

Vertical Single Phase Lathe

Skylarc Ref D177023

Length

1200mm

Width

960mm

Height

1750mm

Vertical Single Phase Lathe.
Made in New Zealand by J.O.Miller, Timaru and Kidson Engineering in 2006.
250mm diameter 3-jaw chuck with 77mm inner bore.
2x extra mounting plate attachments with diameters of 400mm and 582mm.
Xtravert branded controller.box.
Newall digital panel.
Removable light.
Very well maintained Lathe. Parts move smoothly.
See video to view this machine running.

Single Phase Spindle Grinder by J.O. Miller, Timaru

Skylarc Ref V175455

Length

1140mm

Width

680mm

Height

600mm

Spindle Grinder
Variable speed
Made in New Zealand in 1999 by J.O. Miller, Timaru.
Assorted chucks including magnetic chuck
Includes many near pristine attachments and accessories, see photos.
The lathe/Grinder is in excellent overall condition and was very well maintained.

Single Phase Lathe by J.O. Miller, Timaru

Skylarc Ref S175452

Length

860mm

Width

650mm

Height

500mm

Single Phase Lathe.
Made in New Zealand in 2010 by J.O. Miller, Timaru.
650mm total bed length.
Various Chucks in diameters from 65mm to 115mm.
A wide range of mostly pristine appearing accessories and attachments included, see photos.
Belt driven with separate motor assembly unit.
See photos for further details on what is included and condition of unit.
Th motor drive Assembly has not been tested as it was delivered to us on its side wirh all its lubricating oil drained out. Buyer will need to add new lubricant fluid to the motor reservoir before usage. Motor pulleys and Lathe chuck shat all move smoothly by hand.

Elliot Omni Speed MS30/2500 3-Phase Lathe

Skylarc Ref H177001

Length

2640mm

Width

1000mm

Height

1550mm

Elliot Omni Speed MS30/2500 3-Phase Lathe.
1400mm between centres..
200mm swing over bed.
Spindle speeds from 30rpm to 2500rpm.
50mm spindle bore.
250mm 3-jaw chuck by Pratt Burnerd.
250mm 4-jaw chuck by Elliott.
Two types of fixed steadies included.
315mm dia faceplate.
530mm dia faceplate.
Box with chuck keys and live centre.
Crosslide and compound slide showing signs of wear
Crosslide DRO reader head wiring not operating
Coolant pump not operational
C & B head stock speed range not selecting
Slow to reach top speed

Luxcut Single Phase Surface Grinder

Skylarc Ref C176060

Length

1280mm

Width

930mm

Height

1640mm

Model: Luxcut MYS7115.
Maximum grinding width 150 mm.
Maximum grinding length 460 mm.
Machine serial number 187003009.
Single phase supply.
Motor power rating 1.1 kW.
Motor speed 2800 rpm.
Magnetic chuck 460mm x 150mm
Handwheels fitted for table and head movement.
Control panel with green start button and red emergency stop button.

Jos Miller & Son Tool Grinder

Skylarc Ref U174830

Length

900mm

Width

700mm

Height

1600mm

Maker Jos Miller & Son Timaru
Year of manufacture 1963
Bench type tool grinder on pedestal base
Electric motor plate marked Newman ELF
Motor rating 1/2 hp
Motor voltage 220 to 230 V
Motor phase single phase
Motor speed 2850 rpm
Motor frequency 50 Hz
Spindle speed plate marked 4500 rpm
Spindle lubrication marked grease with Shell Alvania
Machine fitted with adjustable work table and slides
Machine fitted with tailstock style support on table
Machine fitted with electric lamp on articulated arm
Control panel with start and stop push buttons
Control panel with three toggle switches
Control panel with one general purpose outlet.
Includes a large cabinet of accessories and attachments, see photo.
Also a plastic bin with more attachments!

Ravaglioli Vehicle Wheel Alignment Hoist

Skylarc Ref F175855

Model RAV640 2
Manufacturered 2005 or 2006 (Plate hard to read)
4200kg capacity
4600mm long
Has been dismantled for collection

Industrial Pallet Racking Assembly

Skylarc Ref H175129

Industrial Pallet Racking Assembly.
Includes the following components:
- 14x 900x75x3010mm vertical frames.
- 168x 1820x40x60mm orange horisontal beams.
- Large stack of MDF shelving boards.
- Box of locking pins

Parts show typical warehouse usage and wear.

The Bramley KC1660 3-Pase Lathe

Skylarc Ref N177007

Length

2570mm

Width

900mm

Height

1190mm

The Bramley KC1660 3-Pase Lathe.
Manufactured 01/1983.
50mm spindle bore.
Approx 1400mm between centres.
200mm swing over.
290mm long Removable bed section below chuck.
Six spindle speeds from 150rpm to 1800rpm.
250mm 3-jaw chuck.
300mm 4-jaw chuck.
403mm face plate.
2x steady rests.
Top worklight.
One of three electrical speeds not operational
Manual feed wheel missing

Kassow Robots RC02 Robot Arm w/ Controller

Skylarc Ref T170253

Kassow Robots robot arm.
Arm is approx 1300mm in length.
Model RC02 robot controller.
Controller supply 100V-230V AC 16A.
Controller serial number 210604RC0004.
Kassow Robots teach pendant model TP02 included.
Teach pendant serial number 210607TP0001.
Robotiq grippers attached to robot arm.
Wiring harnesses and cables included.
Tool kit with assorted components and fasteners included.
CoBotics documentation manual included.
Includes heavy steel arm mounting column 635mm tall.
Controller box and pendant units powered on, see photos.
Formerly used to load a CNC lathe

Benchtop Sheet Metal Slip Roller

Skylarc Ref G175466

Length

860mm

Width

200mm

Height

320mm

Benchtop Sheet Metal Slip Roller.
No manufacturer label though its colour scheme may indicate its a Hafco unit.
Model No.SRG-24.
Manufactured 09/2009.
600mm long rollers.

Top-Tech Single Phase Radial Arm Drill

Skylarc Ref K176068

Length

900mm

Width

520mm

Height

1860mm

Model :Top-Tech DM20
Type radial arm drilling machine
Max drilling capacity 20mm
Spindle taper MT3
Max span 500mm
0.75kW motor
Date 2001
Spindle speed settings at 50Hz 2000 1200 710 380 210 rpm
Chuck capacity 16mm JT3
Vertical column mounted on base
Radial arm with rack and pinion adjustment
Handwheel control for head movement
Lever control for spindle feed
315mm x 260mm x 240mm tall T slot table fitted to base

Luxcut Industrial Single Phase Horizontal Bandsaw

Skylarc Ref O175630

Length

1550mm

Width

680mm

Height

1030mm

Luxcut Industrial Single Phase Horizontal Bandsaw.
400mm max material cutting width
Includes 3500mm long material support roller conveyor.
Includes metal lubricant bin with various parts.
Includes a spare new Starrett Versatix MP saw blade 27mm x 0.9mm x 8-12 TPI.
Single phase 10A plug.
Very dirty but operates.

Nova Viking DVR 16" Digital Drill Press

Skylarc Ref R175451

Length

500mm

Width

370mm

Height

1140mm

Brand: Nova
Model: Viking DVR 16" Digital Drill Press
Drive type: DVR Digital Drive Technology
Swing: 16"
Stroke: 4.5"
Spindle speeds: variable
Speed range: 150 to 3000 rpm
Spindle taper: MT2
Maximum distance spindle to table: 317mm
Distance spindle to base: 575mm
Table size: 320mm x 320mm
Table tilt: 45° to 45°
Table rotation: 360°
Chuck size: 1 to 16mm
Column diameter: 78mm
Base size: 469mm x 270mm
Motor: DVR high torque motor with electronic variable speed
Motor power: 1 HP single phase
Rated electrical parameters: 110 to 120V 15A or 220 to 240V 10A 1HP
Product date: 2020.04.20
Serial number: 031067
Digital speed readout
Electronic braking
Quill travel: 4.5" in 1.25 revolutions of handle

https://www.carbatec.co.nz/product/32635-nova-viking-16-inch-drill-press-bench-top

605mm Benchtop Sheetmetal Folder by J.O. Miller, Timaru

Skylarc Ref L175445

Length

780mm

Width

300mm

Height

200mm

605mm Benchtop Sheetmetal Folder.
Made in New Zealsnd in 199 by J.O. Miller, Timaru.
605mm max material width.
1.6mm max thickness.
Well built local.made tool.

Custom Rotating Welding Stand w/ 380mm 3-Jaw Lathe Chuck

Skylarc Ref K177004

Length

750mm

Width

650mm

Height

1290mm

Custom made 3-phase Rotating Welding Stand.
380mm 3-Jaw Lathe Chuck mounted on top of a 600mm diameter face plate.
The custom built Rotating stand has 32A and a 20A 3-phase plugs.
Very dirty unit with damaged power cables, see photos.

Industrial Geared Head 3-Phase Drill Press

Skylarc Ref M177006

Length

770mm

Width

550mm

Height

1790mm

Industrial Geared Head 3-Phase Drill Press.
Made in China, date not indicated.
Drill model M1-35.
550mm diameter table.
20mm Keyed chuck installed.
No.3 drill Tooling mount.
One of three electrical speeds not operational
Manual feed wheel missing

Mitutoyo Outside Micrometer Set

Skylarc Ref I175260

Length

480mm

Width

270mm

Height

50mm

Brand Mitutoyo.
Outside micrometer marked 25–50 mm.
Outside micrometer marked 50–75 mm 0.01 mm.
Outside micrometer marked 100–125 mm 0.01 mm.
Outside micrometer marked 125–150 mm 0.01 mm.
Outside micrometer marked 103–140 mm.
Several small unbranded micrometers present.
Multiple Mitutoyo extension standards present.
Wooden fitted storage case present.
Some paperwork and diagrams included in case.
Made in Japan marking visible on at least one micrometer.
Measurement units are metric.
Resolution on marked Mitutoyo frames is 0.01 mm.

Vintage Mini Drill Press by Joc Miller

Skylarc Ref J175469

Length

440mm

Width

200mm

Height

680mm

Vintage Mini Drill Press.
Manufactured in New Zealand in 2967 by Joc Miller, Timaru.
Single phase.
See photos for included accessories.
Very good condition for its age.

Adjustsble Steel Shelving Assembly

Skylarc Ref P175189

Adjustsble Steel Shelving Assembly.
All steel construction finished in light grey.
Includes the following components:
- 6x 600x80x2000mm vertical frames.
- 30x 1340x40x60mm horizontal beams.
- 26x 665x560x30mm steel Shelving panels.

Some components show rusting and/or dents, etc.

CMT Grinding Attachment

Skylarc Ref C175852

Length

440mm

Width

325mm

Height

240mm

Model CMT Grinding Attachment.
Motor type YL7122 single phase.
Motor power 370W.
Motor voltage 230V.
Motor frequency 50Hz.
Motor current 2.73A.
Motor speed 2800rpm.
Belt driven grinding wheel
Mains power cord attached.
Blue painted metal housing.
Grinding wheel fitted to spindle.

Industrial Shelving Assembly

Skylarc Ref I175130

Industrial Shelving Assembly.
Includes the following components:
- 8x 600x80x2000mm vertical frames.
- 2x 600x80x1050mm vertical frames
- 26x 1350x40x60mm horizontal beams.
- 30x 665x560x26mm steel shelving panels.

Condition - Some components show dents, some surface rust, etc.

Sherline CNC Rotary Indexer w/ 80mm Toolmaster 4-Haw Lathe Chuck

Skylarc Ref E177050

Sherline CNC Rotary Indexer model 8700 system attached to a ToolMaster 80mm 4-jaw Lathe chuck model K11-80.
Chuck mounted on a custom made base 340mm long with small movable tailstock.
Steping motor with gearbox driving chuck movement.
Custom made plywood box 265x260x185mm includes accessories like chuck keys, controller user guide, and more.
Chuck includes both internal.and external jaw sets.
Sherline controller and motor unit both operate, see video.
All items are very clean and well maintained.

Homage Semi-Universal Dividing Head BS-0

Skylarc Ref H177053

Homage Semi-Universal Dividing Head.
Model BS-0.
Includes tailstock unit.
No other original.acccesories included.
Very well maintained and clean unit.

https://www.homge.com.tw/semi-universal-dividing-head-bs

Hougen HMD908 Magnetic Drill

Skylarc Ref H175883

Length

280mm

Width

270mm

Height

460mm

Brand: Hougen
Model: HMD908
Type: Magnetic base drill
Magnetic base with integral power switch
Motor on off push buttons on top panel
Top panel labelled Hougen and Made in U.S.A.
Power input via attached mains power cord
Three spoke feed handle
Coolant or lubricant bottle mounted on top
Warning and safety instruction labels on side
Base marked CF2
Currently shown with annular cutter installed
Red indicator light present near power cord entry

Lux Cut Precision Cutting Tools Sharpener

Skylarc Ref E177544

Length

640mm

Width

610mm

Height

400mm

Brand: Lux Cut
Model: Precision Cuttingtools Sharpener
Motor driven grinding head
Tilting grinding head with angle scale
Table with two parallel steel ways
Handwheel control on front of base
Handwheel control on right side of base
Built in work light on flexible arm
Grinding head label states machine requires filtered dry air from 90 to 120 PSI
Front chart titled Precision Cuttingtools Sharpener End Mill Grinding Chart
Chart lists cutter diameters from 2 mm to 71 mm with first and second grind angles
Set of collets in wooden box included as shown
Assorted grinding wheels and accessories included as shown

Assorted Small Cutting Tools in Metal Tray

Skylarc Ref I175286

Length

380mm

Width

140mm

Height

130mm

Assorted small metal cutting tools.
Range includes various small end mills.
Range includes small countersink tools.
Range includes small burr type rotary cutters.
Range includes small slitting or slotting saws on arbors.
Range includes pointed centre type tools.
Tools are stored upright in a drilled wooden block.
Wooden block is fitted into a rectangular metal tray.
Shanks are mainly cylindrical metal.
Exact tool count is not specified.
Brands and sizes are not marked in the photos.
Only the items shown in the photos are included.

Wobble Rotary Broach Set

Skylarc Ref I174792

Length

165mm

Width

125mm

Height

90mm

Wobble rotary broach set in wooden box.
Metal identification plate on lid states Broach Protrusion 5/8.
Plate states T.I.R. 0.0008 inch.
Plate lists Across Flats and Bore O/S values in inches.
Across Flats ranges shown 0.06 to greater than 0.63 inch.
Bore O/S ranges shown 1–2/1000 to 6–12/1000 inch.
Plate states Speed up to 1500 r.p.m.
Main rotary broach body included.
Broach body has round brass tag marked J.O.M. 2009.
Set includes multiple broach tools and pins as shown.
Internal metal holders contain broach tools of various hex sizes.
Box has front label marked Wobble Rotary Broach.
Box has metal latch and hinges.
All dimensional information on plate is in inches.

Marlco Keyway Broaches Set

Skylarc Ref N174797

Length

250mm

Width

125mm

Height

75mm

Marlco keyway broaches set.
Metal storage case with hinged lid.
Internal chart titled Keyway Marlco Broaches.
Chart lists recommended shims for standard depth square keyways.
Chart lists No. 0 set sizes 1/16 inch 3/32 inch 1/8 inch.
Chart lists No. 1 set sizes 1/8 inch 5/32 inch 3/16 inch 1/4 inch 5/16 inch.
Chart lists No. 2 set sizes 5/16 inch 3/8 inch 7/16 inch 1/2 inch 9/16 inch.
Chart lists No. 3 set sizes 5/8 inch 3/4 inch.
Wooden insert holds broaches and bushings.
Broaches marked Marlco HSS.
Visible broach sizes include 3/8 inch 1/2 inch and 5/8 inch.
Circular bushings marked Marlco and size markings.
Bushing sizes shown include 1/2 inch 5/8 inch 3/4 inch 7/8 inch 1 inch 1 1/8 inch 1 1/4 inch 1 3/8 inch and 1 1/2 inch.
Each bushing marked with letter P.
Set includes push bar.

W.G. Goetz & Sons Model 10C Press

Skylarc Ref J176067

Length

1200mm

Width

730mm

Height

1760mm

Manufacturer W.G. Goetz & Sons Ltd
Location plate shows Spotswood Melbourne
Model 10C
Serial number CR4575-6
Reclining press
Three phase
Maximum available press capacity 10 tons at 1 inch from bottom of stroke
Press capacity 7.2 tons at 1 1/8 inch from bottom of stroke
Press capacity 6 tons at 1 3/16 inch from bottom of stroke
Press capacity 5.3 tons at 1 1/4 inch from bottom of stroke
Press capacity 4.2 tons at 1 1/2 inch from bottom of stroke
Press capacity 3.8 tons at 1 3/4 inch from bottom of stroke
Stroke of slide 1 3/4 inch
Shut height adjustment up 5 1/2 inch
Adjustment of slide 1 inch
Slide takes punch shanks 1 1/2 inch diameter
Strokes per minute 135
Large flywheel drive
Electric motor mounted above flywheel
T-slotted press table with central opening
Mounted on cast frame base

Cebora Power Rod 1565 Inverter Welder

Skylarc Ref C176034

Brand Cebora
Model Power Rod 1565
Type inverter welder
Art number 253
Input supply 1x230V 50/60Hz
Protection class IP23C
Open circuit voltage U0 74V
Current range 5A to 150A
Maximum output 150A at 26V
Duty cycle X 35 percent at 150A 26V
Duty cycle X 60 percent at 125A 25V
Duty cycle X 100 percent at 115A 24.5V
Maximum input current I1max 26A
Effective input current I1eff 20A
Made in Italy
Includes electrode holder lead
Includes earth clamp lead
On off switch on rear panel
Rotary current control on front panel
Carrying handle on top

3 Large Crates of Metal Parts

Skylarc Ref T175843

Length

3500mm

Width

1000mm

Height

1000mm

Scrap ? Very Heavy
Each crate is approx 1200mm x 1000mm at contains a wide variety of Metal items.
Various metals including Stainless Steel.

Adjustsble Steel Shelving Assembly

Skylarc Ref Q175190

Adjustsble Steel Shelving Assembly.
All steel construction in light grey finish.
Includes the following components:
- 4x 600x80x2000mm vertical frames.
- 48x 1340x40x60mm horizontal beams.
- 48x 660x560x30mm steel Shelving panels.

Some components show denting and/or surface rust.

Battery operated Electric walkie stacker

Skylarc Ref H175857

Length

1000mm

Width

660mm

Height

1260mm

Type electric walkie stacker
Power source lead acid battery visible in base
Drive and lift via electric motor shown in housing
Twin lift chains on mast
Hydraulic lift cylinder on mast
Charger panel shows ammeter and selector switch
Charger input rating 230V AC 50Hz
Charger output rating 12V DC
Damaged insulation visible on charger power cable
Steel mesh guard behind mast chains

Battery would not charge when plunged into charger. Unknown if charger working.

Yilmaz ACK 550 Upvut Saw w/ 7-metre side roller conveyors

Skylarc Ref U175636

Length

8000mm

Width

1200mm

Height

1385mm

Manufacturer Yilmaz Makine Sanayi Ve Ticaret A S
Model ACK 550
Serial number 01292150001
Production date 2015
Total power 4 kW
Rated voltage 400V AC 3P PE 50 to 60 Hz
Rated current 16.7 A
Saw blade diameter 550 x 30 x 32 mm
Air consumption 50 L per minute
Air pressure 6 to 8 bar
Machine weight 360 kg
Control panel with clamp pressure adjustment and emergency stop
Three phase PDL plug rated 20 A 500 V 50 Hz IP66
Included roller conveyor manufacturer Yilmaz Makine Sanayi Ve Ticaret A S
Roller conveyor model DKN 450
Roller conveyor production date 2015
Total conveyor combined length 7-metres.

Hindin Industrial 15 Air Compressor

Skylarc Ref A175460

Length

1080mm

Width

380mm

Height

730mm

Hindin Industrial 15 Air Compressor.
Tank capacity unknown, approx 830mm long, 275mm diameter tank size.
Compressor is a Brook & Crompton model 9122VVB-B01, manufactured 08/1999.
Single phase.
Well maintained unit.

Industrial Pallet Racking Assembly

Skylarc Ref G175128

Industrial Pallet Racking Assembly.
Includes the following components:
- 5x 840x80x3665mm vertical frames.
- 4x 2135x40x80mm horizontal beams.
- 30x 2740m long horizontal beams in varying beam sizes (height and thickness).
- Shelving boards not included.

Ceccato Beltair Pro 90C4R Air Compressor

Skylarc Ref J177549

Length

1000mm

Width

480mm

Height

900mm

Brand: Ceccato
Model: Beltair Pro 90C4R 400/50 MEPS
Type: Belt-driven piston air compressor
Motor power: 3 kW
Maximum pressure: 10 bar
Sound power level Lwa,w: 93.0 dB(A)
Sound pressure level Lwa,m: 89.1 dB(A)
Supply voltage: 400 V three phase 50 Hz
4 pin three phase plug
Weight: 67 kg
Year of manufacture: 2019
Country of manufacture: Italy
Tank mounted horizontal receiver
Two fixed rear wheels and one front swivel castor
Fitted with pressure gauge on receiver
Fitted with belt and fan guard

Bandsaw on stand

Skylarc Ref F177545

Length

1000mm

Width

380mm

Height

1260mm

Metal cutting bandsaw on fixed stand.
Motor power rating 0.5 HP.
Motor power rating 0.375 kW.
Motor voltage rating 230V.
Motor frequency rating 50 Hz.
Motor current rating 5 A.
Motor speed rating 2820 RPM.
Motor phase rating single phase.
Motor manufacturing date 2006.

Saw has horizontal cutting position.
Saw frame can be raised to vertical position.
Machine has a manual vise for clamping workpieces.
Base has two fixed wheels at the rear.
Saw blade is installed approx 220mm

Hole Gauges 0.062–0.75 inch Set

Skylarc Ref N174823

Length

290mm

Width

120mm

Height

25mm

Hole gauges set in fitted case.
Case label reads Hole Gauges 0.062–0.75 inch.
Multiple telescoping hole gauges included.
Multiple ball type hole gauges included.
Knurled metal handles on gauges.
Some gauges marked Moore and Wright.
Some gauges marked Japan.
Wood and leatherette internal dividers in case.
L shaped gauge handles marked Moore and Wright.
Metal latch closure on case.

Magnetic Chuck

Skylarc Ref P177555

Length

280mm

Width

140mm

Height

50mm

No handle

Record No.36 Engineers Vice

Skylarc Ref I175468

Length

625mm

Width

250mm

Height

280mm

Record No.36 Engineers Vice.
150mm wide jaws.
250mm diameter swivel base.
An older unit but very well maintained for its apparent age.

Large Quantity of Welding Electrodes

Skylarc Ref V175845

Various types
Packets are open

For reference the crate is approx 1200mm x 1000mm but is not included

160mm 4-Jaw Lathe Chuck

Skylarc Ref I177054

4-Jaw Lathe Chuck.
160mm outer diameter.
50mm inner bore.
TOS branded.
80mm thickness.
Includes inside and outside jaw sets and chuck key.
Chuck is mounted on a 198mm diameter mount custom made by J.O. Miller, Timaru.

Keyway broach and bush set in wooden case

Skylarc Ref W176054

Length

290mm

Width

400mm

Height

175mm

Keyway broach and bush set.
Supplied in a wooden case with metal corner protectors and latches.
Includes round bushes labelled 32 34 35 36 38 40 42 44 46 48 50.

Broaches are marked D1-10 HSS CHINA.
Broaches are marked D1-12 HSS CHINA.
Broaches are marked D1-14 HSS CHINA.

600mm Benchtop Guillotine by J.O.Miller, Timaru

Skylarc Ref B175461

Length

690mm

Width

760mm

Height

370mm

Benchtop Guillotine.
Manufactured in New Zealand in 2007 by J.O. Miller, Timaru.
605mm max material width,, 1.6mm max thickness.
Cutting table approx 440mm long.
Includes 2x extra spare blades.
A well built heavy duty and well maintained unit.

Vintage Bramley Cold Saw, Restored by Joc Miller

Skylarc Ref F175465

Length

1140mm

Width

460mm

Height

1425mm

Vintage Bramley Cold Saw.
Restored by Joc Miller, Timaru in 1998.
Specific machine model number and age is unknown.
215mm saw blade mounted with 7x extra blades included in bottom storage cabinet.
Very well maintained vintage machine.

Vintage Ball Bearing Bench Grinder w/ Modifications

Skylarc Ref C175462

Vintage Ball Bearing Bench Grinder w/ Modifications.
Main unit it manufactured by Albertson & Company Inc.
Accessory side attachments manufactured by Joc Miller, Timaru in 1955.
Right side grinding wheels 150mm diameter with 255x103mm variable angle table with tool holding attachment (we are unsure how the attachment is supposed to be mounted, its position in the photos is likely incorrect).
Left grinding wheels with no side cover is 145mm diameter.
Grinder is mounted on a 12mm thick steel plate 458x458mm.
Older but very well maintained vintage Grinder.

Gear cutter and rack cutter set in wooden box

Skylarc Ref P175657

Length

330mm

Width

185mm

Height

60mm

Gear cutter and rack cutter set.

Assorted metal cutting tools in steel drawer

Skylarc Ref H175285

Length

380mm

Width

140mm

Height

130mm

Assorted metal cutting tools.
Multiple end mills visible.
Multiple slot drills visible.
Multiple countersink or chamfer tools visible.
Tools are stored in a steel drawer.
Tools are held in a perforated wooden holder.
Various shank diameters visible.
Cutting tools appear to be high speed steel or similar ferrous alloy.
Some tools are straight flute.
Some tools are helical flute.
Some tools have multi-flute cutting ends.
Some tools have centre cutting tips.
Drawer includes several cylindrical rods on the right side.
Exact tool count is not confirmed.
No size markings are legible in the photos.
Brands or manufacturers are not clearly identifiable from the photos.
Only the items shown in the photos are included.

Vintage Pacera Drill Press, Single Phase

Skylarc Ref P177061

Length

620mm

Width

400mm

Height

1880mm

Vintage Pacera Drill Press.
Made in England.
Model number and age unknown.
Single phase non-original motor.
Attached Teco rpm counter with user manual.
13mm Keyed chuck with key.
Foot pedal drill start/stop.
Large brass counterweight.

Sykes-Pickavant Twinpull Ball Bearing Puller Kit 098100

Skylarc Ref T174855

Length

430mm

Width

240mm

Height

65mm

Brand: Sykes-Pickavant
Model: Twinpull
Kit number: 098100
Type: Ball bearing puller kit
Made in England
Case colour: red
Includes force screw part no. 098011
Includes thrust washer part no. 098012
Includes thrust nut part no. 098012
Includes beam part no. 098012
Includes main rod assemblies part no. 098019
Includes extension rods 90mm part no. 098017
Includes extension rods 195mm part no. 098017
Includes end piece part no. 098039
Overall puller spread 20mm to 111mm
Adaptor diameters 5.5mm to 12.5mm
Label states world patents pending
Manufacturer address: Sykes-Pickavant Ltd Kilnhouse Lane Lytham St Annes Lancs FY8 3DU England
Includes plastic carry case

Europlan 8-Door Personnel Locker Assembly

Skylarc Ref D174423

Length

1200mm

Width

450mm

Height

1800mm

Europlan 8-Door Personnel Locker Assembly.
Steel construction in Cyan finish.
Doors can be locked with padlocks (Padlocks not included).

Adjustsble Steel Shelving Assembly

Skylarc Ref R175191

Steel Adjustsble Shelving Assembly.
All steel components finished in grey enamel.
Includes the following components:
- 5x 945x55x2400mm vertical frames.
- 36x 1200x40x60mm horizontal beams.
- 18x 1180x895x18mm MDF Shelving boards.
- 37x 850mm Shelving board bracing bars.

Imperial 5C Collets 1/16–1 1/8 Set

Skylarc Ref K176094

Length

325mm

Width

250mm

Height

170mm

Imperial 5C collet set.
Size range marked 1/16 to 1 1/8 inch.
Collets are 5C type.
Collets marked Phase II.
Collets marked China.
Some collets marked Taiwan.
Wooden box with internal fitted tray.
One collet closer body present.
Closer body marked MAKER J O MILLER 1992.
Drawing sheet for No 5 Morse taper 5C adapter included.
Adapter drawing shows 20 TPI right hand thread.
Multiple individual collets with split clamp design.
Gear and small shaft included in box.
Square drive tightening tool included.

Assorted Reamers, Metric & Imperial Sizes

Skylarc Ref N177111

Assorted Reamers, Metric & Imperial Sizes.
Sizes from 1mm & 9/64" to 24mm & ¾".
Condition and age varies with each unit.

Vintage Mini 43mm Vice w/ Ball Joint Base by J.O.S. Miller, Timaru

Skylarc Ref K175444

Vintage Mini 43mm Vice w/ Ball Joint Base.
Custom made in New Zealand in 1950 by J.O.S. Miller, Timaru.
Heavy steel Base 240x240mm.
43mm jaw with.
Vice opens to approx 40mm.
Total assembly height approx 210mm.
Vice functions smoothly for its age.
A sturdy well built and maintained vintage tool.

Mitutoyo BM1-10BN Gage Block Set

Skylarc Ref Z176083

Length

290mm

Width

110mm

Height

35mm

Manufacturer Mitutoyo Mfg Co Ltd
Model BM1-10BN
Code No 516-101
Grade B
Gage block set
Serial number 800456
Metric blocks marked 1 mm
Blocks marked 1.25 mm
Blocks marked 1.5 mm
Blocks marked 2 mm
Blocks marked 3 mm
Blocks marked 5 mm
Blocks marked 10 mm
Blocks marked 15 mm
Blocks marked 20 mm
Blocks marked 25 mm
Supplied in wooden storage case
Made in Tokyo Japan

ER50 Collets w/ Custom Mounting Chuck & Wood Case

Skylarc Ref N177137

Length

350mm

Width

250mm

Height

150mm

ER50 Collets w/ Custom Mounting Chuck & Wood Case.
Metric collet sizes from 10mm to 34mm.
Collets 50mm dia, 60mm long.
Includes a ER50 collet chuck with a 100mm diameter mount cystom made by J.O. Miller, Timaru.
Includes a cystom made Wrench and plywood case.
Items are in excellent to as new condition.

ENCO Centering Scope

Skylarc Ref P175267

Length

120mm

Width

95mm

Height

45mm

Brand ENCO
Type centering scope
Marking CENTERING SCOPE on body
Made in Korea
Shank mounted scope body
Knurled adjustment sleeve on lower end
Eyepiece on angled body section
Supplied in fitted foam-lined case
Includes printed instructions titled INSTRUCTIONS FOR ENCO CENTERING SCOPE
Instructions describe mounting in spindle or chuck
Instructions describe use for aligning work to reticle crosshair

Penfold SP100 Worm Gear Reducer with CEG Electric Motor

Skylarc Ref P175631

Length

625mm

Width

250mm

Height

365mm

Penfold worm gear reducer.
Model SP 100.
Ratio 30:1.
45mm inner bore.
Penfold Transmission Christchurch NZ.

CEG electric motor.
Frame GGT-112M-4.
IE3 efficiency class.
Power 4 kW at 50 Hz.
Voltage 400/690 V at 50 Hz.
Current 7.95/4.59 A at 50 Hz.
Speed 1440 r/min at 50 Hz.
Insulation class F.
Efficiency 88.6%.
Protection ratings marked IP55 IP56 IP66.
Motor type designation GGTM34004003.
Serial number F19040119.
Ambient temperature rating 40°C.
Duty type S1.

Both units appear as new unused. Some dust from storage.

Gamo PT 80 4.5mm Air Pistol

Skylarc Ref X175847

Brand: Gamo
Model: PT 80
Calibre: 4.5mm (.177)
Action: CO2 powered air pistol

NO PELLETS OR CO2

Buyer must be over 18 years of age and be able to provide a copy of their appropriate photo ID on collection regardless of appearance.
We are unable to ship this item.

Minii Custom Benchtop Grinder by J.O.S. Miller

Skylarc Ref H175467

Minii Custom Benchtop Grinder.
Made in New Zealand by J.O.S. Miller, Timaru.
Grinder Assembly made in 1968 and the 90-degree angle gauge on grinding tanle made in 1955.
120mm diameter grinding wheel.
Front table with angle gauge 200x85mm.
Single phase Marathon Electric branded motor.
A very well made vintage machine in excellent overall condition for its age.

Assorted Lathe Turning Tools & Turning Steel

Skylarc Ref V177041

Assorted Lathe Turning Tools & Turning Steel.
A variety of Lathe cutting items, see photos for further details.

Involute Gear Cutter set m1.5x20 degree

Skylarc Ref T177065

Involute Gear Cutter set m1.5x20 degree
Includes:
- No.1, Z12-13.
- No.2, Z14-16.
- No.3, Z17-20.
- No.4, Z21-25.
- No.5, Z26-34.
- No.6, Z35-54.
- No.7, Z55-134.
- No.8, Z135- Infinity.
- all sbove have 22mm inner bore.

See photos for details on markings on each cutter.
Cutters appear near new with little to no visible signs of prior usage.

Ubiquity Unifi XG 6 PoE 10-Gigabit Managed Switch

Skylarc Ref O175058

Ubiquity Unifi XG 6 PoE 10-Gigabit Managed Switch.
Model No.US-XG-6POE
Measures 268x165x32mm.
Includes attached 450mm server Rack mounting frame.
NOTE that the 54V power adapter cable is missing, buyer will need to source a replacement to power the switch.
See our other listings for more of these switches.

https://store.ui.com/us/en/products/us-xg-6poe

M Internal 50-75 and 75-100 micrometer set

Skylarc Ref Y174808

Length

300mm

Width

130mm

Height

50mm

M Internal 50-75 and 75-100 micrometer set.
Two internal micrometer heads marked 50-75 and 75-100.
Resolution marking 0.01 on the 50-75 head.
Knurled grip sections on micrometer bodies.
Foam lined wooden storage case.
Case has metal hinges and latches.
Label on case reads M Internal 50-75 and 75-100.
Includes a small metal tool in the case.

Midea 418L Upright Freezer

Skylarc Ref K173520

Length

750mm

Width

711mm

Height

1570mm

Midea Upright Freezer.
Stainless front panel.
Model: HS-507FWEN.
Rated voltage: 220-240V.
Rated frequency: 50Hz.
Rated current: 0.8A.
Rated defrost power: 280W.
Lamp rated power: max 6W
Climate class: T
Electric shock protection class: I
Insulation blowing agent: Cyclopentane
Refrigerant: R600a
Refrigerant amount: 50g
Total gross volume: 418L
Freezer storage volume: 390L.
Freezing capacity: 18kg per 24h.
Net weight: 74kg.
Product dimensions: 711W x 750D x 1570H mm.
Energy consumption: 436kWh per year.
Slows light usage. Interior would benefit from a mild clean.

TESA Micromaster Digital Micrometer 0-30mm 0-1.2in

Skylarc Ref E176088

Length

200mm

Width

100mm

Height

50mm

Brand: TESA
Model: Micromaster
Measurement range: 0 to 30 mm
Imperial range: 0 to 1.2 in
Measurement system: capa µ system
Country of manufacture: Switzerland
Display type: digital
Instrument type: external micrometer
Battery type: CR2032
Marking: CE
Serial number: 9Z 1074 02
Supplied in plastic storage case
Printed quick manual for TESA Micromaster series included

Assorted Jobber Drills & other similar Drills

Skylarc Ref U177040

Largr lot of Assorted Drills.
Metric and Imperial sizes.
Jobber type with other similar drill types mixed in.
Sizes from around 1mm up to 1/2".
Condition varies greatly with each unit.

Assorted Drill Taps & Dies

Skylarc Ref S177038

Assorted Drill Taps & Dies.
Tap Sszes up to 1 1/4".
Also includes a few threading dies.

Seco SEKR1203AFTN-ME13-76 T25M inserts

Skylarc Ref N176097

Length

90mm

Width

40mm

Height

30mm

Brand Seco
Model SEKR1203AFTN-ME13-76 T25M
Marked Secolor on cases
Grade T25M marked on inserts
EDP 17144 printed on labels
Code SEKR 42AFTN-76 T25M printed on labels
Quantity 10 inserts per case printed on labels
Three plastic cases visible in photos
Inserts stored in white plastic insert trays

19x Morse Taper Drills, Imperial Sizes

Skylarc Ref V177119

19x Morse Taper Drills.
Imperial Sizes from 7/16" to 1 ¼".
Sgsnk sizes include No.1, No.2, No3, and No.4

Custom Made 77mm Mill Vice by J.O. Miller, Timaru

Skylarc Ref K177108

Mill Vice custom made in 1991by J.O. Miller, Timaru.
77mm wide jaws.
Opens to approx 80mm.
190mm long.
Base plate with 360-degree scale.
Base plate 160x106mm with 14mm wide mou ting guides on bottom. Mounting bolt holes are spaced approx 133mm apart on centre.
Includes vice hand crank attachment.
The vice is in near new condition and very clean.

Metric 5C Collets 3-25mm Set

Skylarc Ref A175876

Length

375mm

Width

155mm

Height

110mm

Metric 5C collets set.
Label on box states Metric 5C Collets 3-25mm.
Collets are stored in a wooden box.
Collets are marked with size numbers.

CMF Carraro SA804 Printing Machine

Skylarc Ref D175307

Length

5800mm

Width

1800mm

Height

3600mm

High-capability roll-fed flexographic printing press designed for multi-station printing, coating, drying, and inline finishing. Suitable for high-volume production with accurate multi-colour registration across a wide range of substrates.
Features four independently adjustable impression stations for precise alignment, four separate dryer units for controlled drying, and integrated inline slitting with waste extraction.
Automatic and manual tension control for stable web handling.
Variable speed control from 0–100 m/min (dependent on material and process conditions).
Closed-loop hydraulic system (50L tank), Includes two electric hoists for roller changeover and a full set of 42 rollers. լայն printing range from 20–650 GSM

BUYER TO REMOVE/DISMANTLE

4x Rolls of Coated Copper Wire

Skylarc Ref A175122

4x Rolls of Coated Copper Wire.
All rolls have copper wire with outer plating in another unknown type metal, see photos.
Three rolls are 4mm wire, 200⁰C temp rating, 600V.
One roll is 0.75mm wire.
Lengths are unknown for blue and red rolls.
Black roll is 152m length.
16.3kg total combined weight.

Assorted Industrial Drills

Skylarc Ref T177039

Assorted Industrial Drills .
Lengths up to 315mm.
Diameters up to 1 1/8".

Milling /Drilling T-Slot Table by J.O. Miller, Timaru

Skylarc Ref B177021

Milling /Drilling T-Slot Table.
Made in New Zealsnd by J.O. Miller, Timaru.
Overall dimensions are 301x144x45mm.
T-slot mounting base widths are 75mm to 90mm and slot height 10mm.
Top surface t-slots are 10mm wide top gap, 20mm wide inner gap, 5mm vertical slot.
Very clean and tidy table.

Inside micrometer 50–250mm 0.01mm set

Skylarc Ref N175863

Length

210mm

Width

125mm

Height

40mm

Inside micrometer set.
Measuring range 50 to 250mm.
Resolution 0.01mm.
Packed in fitted foam insert.
Supplied in wooden storage case with latch.

10x Assorted Adjustable Reamers

Skylarc Ref L177109

10x Assorted Adjustable Reamers.
Smallest is 3/8" to 13/32".
Largest is 1 1/16" to 1 3/16".

Assorted Pallet Racking Horizontal Beams

Skylarc Ref E175126

Assorted Pallet Racking Horizontal Beams.
Three sizes of beams in auction.
Includes:
- 16x 1830x45x55mm beams.
- 8x 1345x45x80mm beams.
- 8x 1380x35x70mm beams.

See photos for hook end designs/types.

8x Vintage Workshop Bench Lamps

Skylarc Ref L177057

8x Vintage Workshop Bench Lamps.
Spring Actuated arms with Lengths from approx 700mm to 800mm.
Mounts on all are 10mm diameter steel pins. Buyer will need to source methods for mounting the lamps.
All are older models from prior engineering workshop usage.

Groz Angle Block 0–60°

Skylarc Ref G174816

Length

115mm

Width

60mm

Height

65mm

Brand: Groz
Type: Angle block
Angle range: 0–60 degrees
Scale marked in 1 degree increments
Least count: 10 minutes
Stated squareness: 0.0004 inch (10 micron)
Stated parallelism: 0.0004 inch (10 micron)
Material appears to be metal
Graduated arc scale on one face
V shaped top with adjustable jaw
Engraved with Groz Engineering Tools

ER32 Collet Set with MT2 MT3 and MS2 Holders

Skylarc Ref Q175268

Length

360mm

Width

230mm

Height

80mm

ER32 collet set.
Collet size range marked from 3/16 inch to 25/32 inch.
Collets include fractional sizes 3/16 7/32 1/4 5/16 11/32 3/8 13/32 7/16 17/32 9/16 5/8 21/32 11/16 3/4 25/32 inch.
Collets are marked with dual size codes such as 5-4 6-5 7-6 8-7 8-6 9-8 10-9 11-10 12-11 14-13 15-14 16-15 17-16 18-17 19-18 20-19.
One holder marked ER32-MS2.
One holder marked MTB3-ER32.
Plastic carry case shown.
Metal internal tray shown.

Stainless Steel Rotating Table with Wanshsin Motor

Skylarc Ref O174356

Length

1300mm

Width

1000mm

Height

830mm

Stainless steel rotating table on fixed frame.
Circular rotating top with surrounding static work surfaces.
Adjustable guide rail mounted above table edge.
Four adjustable feet on table legs.
Driven by Wanshsin induction motor with gear reducer.
Motor output rated 0.2 kW 1/4 HP.
Motor voltage rated 110V or 220V.
Motor current 3.6A at 110V and 1.8A at 220V.
Motor frequency 50 Hz or 60 Hz.
Motor speed 1380 rpm at 50 Hz and 1680 rpm at 60 Hz.
Motor nameplate shows forward and reverse wiring diagram for 220V.

Vintage Imperial Size Reamers in Custom Wood Case

Skylarc Ref O175708

Vintage Imperial Size Reamers in Custom Wood Case.
Sizes from 1/8" to 1".
All.stored in a 335x290x32mm custom wood case with metal strips indicating each drill size.
Age of set is unknown.

Scorpion Poetable Petrol Generator DY1000L, Unused

Skylarc Ref Z175459

Length

455mm

Width

360mm

Height

385mm

Scorpion Poetable Petrol Generator.
Model No.DY1000L
Engine is a Scorpion 2.4hp petrol engine model HM-82.
Peak AC output 950W
Rated output 900W.
240V single phase.
Includes user manual and 12V DC jumper cable attachment.
Condition - Petrol tank id come dry and shows no indication of having had petrol in it, see photos. Manufacturer tag attached to pull cord stating to add oil before use. Oil dip stick shows very little oil in reservoir and that oil appears clean, see photos. Generator likely was never used, only dusty from apparent storage.

Vintage 1946 Hydraulic Press, NZ Made

Skylarc Ref L175471

Vintage Hydraulic Press.
Made in New Zealand in 1946 by Jos Miller, Timaru.
153mm diameter press plate.
Max capacity is unknown.
Approx 130mm Hydraulic ram movement.
Includes jacking handle.
Hydraulics function normally but not tested under load.
Overall very good condition for its age.

Diamond keyway broach set

Skylarc Ref L174795

Length

215mm

Width

115mm

Height

30mm

Diamond keyway broach set.
Broaches marked DIAMOND 1/16 A HSS.
Broaches marked 3/32 A HSS CHINA.
Broaches marked 1/8 A HSS CHINA.
Broaches marked DIAMOND 5/32 B HS.
Broaches marked 3/16 B HSS CHINA.
Several push bushings marked H S BROACH TURNERS FALLS MASS MADE IN U S A.
Bushing sizes marked 1/2.
Bushing sizes marked 9/16.
Bushing sizes marked 11/16.
Bushing sizes marked 5/8.
Bushing sizes marked 7/8.
Bushing sizes marked 13/16.
Bushing sizes marked 1 1/2.
Bushing sizes marked 3 1/4.
Some small slotting guides marked 11/32.
Some small slotting guides marked 11MM.
Supplied in a plastic case.

Insize Dial Bore Gage 2-6 inch Set

Skylarc Ref P174799

Length

440mm

Width

150mm

Height

60mm

Brand Insize
Type dial bore gage set
Measuring range 2 to 6 inch as marked on handle and case
Dial indicator resolution 0.0005 inch as marked on dial face
Dial indicator range 0 to 0.25 inch as marked on dial face
Includes dial bore gage body with dial indicator
Includes multiple interchangeable measuring anvils marked 2.0in 2.2in 2.4in 2.6in 2.8in 3.0in
Includes extension rods marked 3.2in 3.4in 3.6in 3.8in 4.0in
Includes three setting rings marked plus 0.01in plus 0.05in plus 0.02in
Includes black threaded adapter
Supplied in green plastic Insize case with foam insert
Case label marked Dial Bore Gage 2-6 inch
Some anvils are in plastic wrapping
Paper documentation is present inside the case

TM Toolmaster HSS Broach Drill Set D109

Skylarc Ref N175291

Length

240mm

Width

200mm

Height

60mm

Brand: TM Toolmaster.
Model: D109.
High speed steel broach drill set.
Nominal cutter sizes: 14mm.
Nominal cutter sizes: 16mm.
Nominal cutter sizes: 18mm.
Nominal cutter sizes: 20mm.
Nominal cutter sizes: 22mm.
Nominal cutter sizes: 24mm.
Nominal cutter sizes: 25mm.
Cutters marked TM HSS with diameter on each shank.
Label states 25mm depth of cut.
Set includes 19mm universal shank arbor as per label.
Set includes 1 x 1/4 inch locating pin as per label.
Locating pins marked Ø6.34 x 77 and Ø6.34 x 103.
Item code on case label: D109.
Made in China (per case label).
Supplied in plastic carry case with foam insert.

Assorted Workshop Storage Bins

Skylarc Ref F175387

Nally, Maxi bin and others

HP Elitebook 840

Skylarc Ref A175668

Intel core i7
16gb Ram
230gb HD

Vintage Heavy Steel Milling Vice by J.O. Miller, Timaru

Skylarc Ref Z177019

Vintage Heavy Steel Milling Vice.
Made in New Zealand in 1951 by J.O. Miller, Timaru.
Bade frame is 330x150mm.
Vice height 73mm.
Jaw width 150mm.
Opens up to 200mm via an innovative removable extension of the tightening screw, see photos.
Mounting base is a T-slot type with T-slot gaps of 75mm and 90mm.
A very clean and well cared for vintage hand made tool.

Assorted Small Milling End Mills

Skylarc Ref K177082

Assorted Small Milling End Mills.
6mm shank diameters.
See photos for cutting head types.

Bearing separator and puller set in metal case

Skylarc Ref W174858

Length

450mm

Width

190mm

Height

60mm

Bearing separator and puller set.
Two bearing separator blocks included.
Multiple threaded extension rods included.
Central forcing screw included.
Assorted nuts and washers included.
Components stored in a formed plastic tray.
Tray housed in a red metal case.
Case has two metal latches.
Case has an integrated red handle.
Label inside lid shows Avon Engineering Supplies Ltd Christchurch New Zealand.
Overall quantity of individual pieces is not confirmed.
Specific sizes and capacity are not marked on the set.
Brand of the puller components is not marked.

SEW-Eurodrive CMP50S Motor with WHF37 Gearbox

Skylarc Ref U174856

Length

350mm

Width

260mm

Height

160mm

Brand: SEW-Eurodrive
Motor model: CMP50S/KY/RH1MVSM1
Gearbox model: WHF37 CMP50S/KY/RH1M/SM1
Motor rated torque Mo: 1.30 Nm
Motor rated current I: 0.96 A
Motor speed range nN: 0 to 3000 rpm
System voltage Usys: 400 V
Maximum current Imax: 5.10 A
Ingress protection rating: IP65
Insulation class: F
Motor type: permanent magnet
Motor mounting: IM B5
Motor mass: 2.840 kg
Gear unit peak torque Ma pk: 108 Nm
time rating Ma pk: 194.00 Nm
Maximum input speed ne pk: 4500 rpm
Gear unit mounting: IM M1B
Gear unit mass: 8.000 kg
Nameplate code: 13339303
Gear unit ratio i: 23.25
Gearbox filled with food grade oil
Inverter duty only
Made in Germany

Mercer Type 71 Dial Indicator Set

Skylarc Ref H174791

Length

130mm

Width

120mm

Height

40mm

Mercer dial indicator set.
Two Mercer England Type 71 dial indicators.
Indicators marked 0.001 inch resolution.
Rectangular metal bar marked J.O.M. 012.
Metal bar fitted with the two dial indicators.
Cylindrical metal rod included.
Pivoting two arm metal attachment included.
Small yellow plastic container included.
Yellow container holds four small metal screw fittings.
All items supplied in a wooden box with metal lid.
Box label reads Milling m/c TRAM.

Vintqge Dyco Benchtop Drill Press

Skylarc Ref T175635

Length

630mm

Width

250mm

Height

780mm

Vintqge Dyco Benchtop Drill Press.
Unknown model and age.
Single phase 10A motir with a modern power cord added.
16mm Keyless chuck.
Drill table approx 300x250mm.
Includes small drill vice with 80mm wide jaws.
Older unit but still operating.

Rust Ripa Benchtop Sandblasting Cabinet

Skylarc Ref Q175450

Length

630mm

Width

495mm

Height

575mm

Rust Ripa Benchtop Sandblasting Cabinet.
Model number unknown.
Includes blasting gun, power cord.

Fuji Tool Universal Angle Block Set UAB-8

Skylarc Ref L174821

Length

235mm

Width

110mm

Height

65mm

Brand: Fuji Tool
Model: Universal Angle Block UAB-8
Manufacturer: Fuji Tool Co.
Country of manufacture: Japan
Set includes 8 angle blocks
Angles included: 1°
Angles included: 2°
Angles included: 3°
Angles included: 4°
Angles included: 5°
Angles included: 10°
Angles included: 15°
Angles included: 30°
Material appears to be metal
Supplied in original Fuji Tool cardboard box
Blocks are stored in a white foam holder
All blocks are marked FUJI TOOL JAPAN with their angle value

CY180 Industrial Blower with YL90L-2 1.5kW Motor

Skylarc Ref U175870

Length

400mm

Width

360mm

Height

540mm

Model number CY180 blower housing
Blower voltage rating 220V
Blower cycles 60Hz or 50Hz
Blower phase 1
Blower current rating 3.2 or 1.1A
Blower maximum air flow 39 or 46 cubic metres per minute
Blower power rating 1.5kW
Blower speed 3200 or 2800rpm
Blower maximum pressure 198 or 186 mmAq
Motor model YL90L-2
Motor power rating 1.5kW
Motor speed 2800rpm
Motor voltage 220V
Motor frequency 50Hz
Motor current 9.44A
Motor protection rating IP44
Motor insulation class B
Single phase capacitor motor
Unit mounted on metal base with bolt holes
Blower housing has round metal inlet duct

Assorted Precision Engineer's Measuring Tools

Skylarc Ref X177017

Assorted Precision Engineer's Measuring Tools.
Various steel rulers, outside and inside Calipers, 90-degree angle straight edges, centre angle gauge, and more, see photos.
Condition varies with each item.

Large Lot of End Mills, Drills, Taps & Dies, and More

Skylarc Ref B175617

Large Lot of End Mills, Drills, Taps & Dies, and More.
Wide variety of items for drilling, milling, thread making and similar.
Condition varies greatly with each unit.

103mm Milling Vice

Skylarc Ref P175709

Milling Vice.
103mm wide jaws.
Opens to approx 105mm.
Includes crank handle.
Swivel base.
Base mounting bolt slots 210mm apart on centre.
Overall dimensions are approx 300x170x105mm.
Very clean and well maintained vice.

Penfold SP100 Worm Gear Reducer w/ CEG Electric Motor

Skylarc Ref Q175632

Length

600mm

Width

250mm

Height

360mm

Penfold worm gear reducer
Model SP 100
Ratio 25 to 1
45mm diameter bore.
Penfold Transmission Christchurch NZ.
Output shaft supported by SKF bearing.
CEG electric motor.
Motor frame CGS-100L2-4-2B
Three phase motor
Motor power rating 3 kW at 50 Hz
Voltage rating 220-240V delta or 380-415V star at 50 Hz.
Current rating 10.97-10.06-6.35-5.82 A at 50 Hz.
Motor speed 1410 r per min at 50 Hz.
Motor efficiency 87.4 percent.
Both units apoear as new unused. Some light dust from storage.

Vintage 1945 Hand Made Precision Plumb Bob by Jos Miller, Timaru

Skylarc Ref R175711

Vintage Hand Made Precision Steel Plumb Bob.
Made in New Zealand in 1945 by Jos Miller, Timaru.
102mm long, 12mm diameter.
In near pristine condition for a 1940's era tool.

Yokogawa Magnetic Flowmeter ADMAG AXF040H

Skylarc Ref E174450

Brand Yokogawa.
Model AXF040H.
Series ADMAG AXF magnetic flowmeter.
Style S1.
Size 40 mm 1.5 inch.
Fluid pressure rating 1 MPa max.
Fluid temperature range minus 10 to 130 deg C.
Ambient temperature range minus 10 to 50 deg C.
Supply 24 VDC 12 W.
Alternative supply 24 VAC 50 slash 60 Hz 30 VA 12 W.
Output current 4 to 20 mA 0 to 750 ohm.
Pulse output 30 VDC 0.2 A max.
Meter factor L equals 1.2027.
Meter factor H equals 1.1489.
Tag number S5R608259.
Year of manufacture 2015.06.
Display with LCD screen and push button keypad.
Tri clamp process connections.

Assorted Flap Wheels

Skylarc Ref I175104

Assorted Flap Wheels.
Most are PFERD brand.
Diameters from 30mm to 75mm.
Grits from 60 to 240.
As new leftover workshop supplies stock.

Assorted 180mm Fibre Grinding Disks, Bulk Lot

Skylarc Ref G175102

Assorted 180mm Fibre Grinding Disks.
Deerfos and VSM brands.
Grits from 36 to 120.
Total number in auction unknown, see photis.
As new unused leftover workshop consumables stock.

Milling /Drilling Steel T-Slot Table

Skylarc Ref A177020

Milling /Drilling T-Slot Table.
Total length 330mm.
T-slot area 260x156mm.
Table is 70mm tall.
T-slots are spaced 50mm apart on centre.
T-slot top gaps are 10mm wide, lower gap 20mm.
A very clean and tidy heavy steel table showing little to no prior usage.

Matrix Coventry Gauge E-49 Workshop Slip Gauge Set

Skylarc Ref P174825

Length

260mm

Width

170mm

Height

45mm

Brand Matrix.
Model E-49 Workshop.
Manufacturer Coventry Gauge & Tool Co Ltd.
Slip gauge set in inch sizes.
Marked International Inch 68°F.
Grade 1.
Includes protective slips marked on baseboard.
Gauges are rectangular steel blocks.
Gauges are arranged by size in labelled rows.
Set serial number NOY 18977.
Supplied in a grey metal case with two knurled latches.
Case lid has circular Matrix logo.

Vertex VP-018 parallel set

Skylarc Ref M176044

Length

190mm

Width

175mm

Height

55mm

Brand Vertex.
Model VP-018.
Marked Vertex Machinery Works Co. Ltd on case label.
Set of steel parallels in fitted wooden case.

Assorted Tools

Skylarc Ref D176009

See photos

42x Spare Steel Shelving Panels, 665x560x26mm

Skylarc Ref O175188

42x Spare Steel Shelving Panels.
Each is approx 665x560x26mm.
Finished in light grey.
Condition varies with each panel, some show rusting and/or dents, etc.

Precision Machinist Squares & Straight Edge

Skylarc Ref U175714

Precision Machinist Squares & Straight Edge.
Includes:
- Moore & Wright No.308 straight edge, 305x30mm.
- Moore & Wright No. 1944 square, 243x132mm.
- Moore & Wright square 182x107mm.
- Presser square DIN 875/1, 150x100mm.
- Presser square DIN 875/2, 105x70mm.

All are in near new condition, see photos. Age of items is unknown.

TengTools hook spanner wrench set in red case

Skylarc Ref V175871

Length

265mm

Width

140mm

Height

45mm

TengTools hook spanner wrench set.
Three TengTools wrenches marked 3/4"–2".
One TengTools wrench marked 1–1/4"–3".
One TengTools wrench marked 2"–4–3/4".
Multiple interchangeable hook heads included.
Hooks and heads stored in a moulded plastic tray.
Red plastic storage case with hinged lid.
Handwritten text inside lid reads PLAIN HOOK UNDER.
Additional mixed spanners stored in the same red case.
One spanner marked NIKKEN HC Made in Japan.
One spanner marked HN 7.
One spanner marked 36mm–47mm CEF LONDON.

Chin Chao machine vice

Skylarc Ref E176036

Length

500mm

Width

230mm

Height

120mm

Brand: Chin Chao.
Machine vice.
Manual lever operated.
Steel jaws.
Cast base.
Removable jaw plates attached with two cap screws per jaw.
Max capacity approx 155mm
Jaw width approx 150mm.

18x Assorted Milling Woodruf Keyseat Cutters

Skylarc Ref P177087

18x Assorted Milling Woodruf Keyseat Cutters.
Brands include Trucut, Somta, Domer, Clarkson.
16x units have 12mm diameter shanks plus one with 10mm shank and one with 6mm shank.
See photos for head sizes/types.
All very clean and tidy units.

Involute Gear Cutter set m1.0x20 degree

Skylarc Ref R177063

Involute Gear Cutter set m1.0x20 degree
Includes:
- No.1, Z12-13.
- No.2, Z14-16.
- No.3, Z17-20.
- No.4, Z21-25.
- No.5, Z26-34.
- No.6, Z35-54.
- No.7, Z55-134.
- No.8, Z135- Infinity.
- all sbove have 16mm inner bore.

Also includes other Cutters, smaller one marked "No.3 DP 35 to 54 T DEP 072" and larger one marked " No.8 BR 10⁰ Frt 2.2 20⁰m=1"

See photos for details on markings on each cutter.
Cutters appear near new with little to no visible signs of prior usage.

Assorted Taperd Shank Drills, Adapters, & Lathe Centres

Skylarc Ref W177042

Assorted Taperd Shank Drills, Adapters, & Lathe Centres.
- 2x No.1 to No.2 Morse Taper shank sleeves.
- 3x dead centre's with No.2 slathered shanks.
- 1x live centre with No.2 Tapered shank.
- 5x Imperal sized drills all with No.2 shanks drill diametes up to 3/4".
Includes 210x100x55mm wood stand.

NSK M Tube Mike 0-250mm Set

Skylarc Ref D176087

Length

175mm

Width

85mm

Height

30mm

Brand: NSK.
Label on case: M Tube Mike 0-250 mm.
Label on case: Japan Micrometer.
Measuring head marked 50-63 mm.
Measuring head marked No. 11697.
Extension rod marked 100 mm.
Extension rod marked 50 mm.
Additional extension rod marked 50 mm.
Adapter marked 25 mm.
Adapter marked 13 mm.
Knurled locking screw on measuring head.
Includes metal setting ring.
Components are metal construction.
Supplied in wooden storage case with hinged lid.

Vintage Archer No.20 Tapping Chuck

Skylarc Ref N175447

Vintage Archer No.20 Tapping Chuck.
No.2 Morse Taper mount.
Very good overall condition for a well maintained older unit.

Industrial Pallet Racking Assembly

Skylarc Ref F175127

Industrial Pallet Racking Assembly.
Includes the following components:
- 2x 600x50x2100mm blue vertical frames.
- 6x 2450x40x50mm blue horizontal beams.
- 6x MDF Shelving boards.

160mm 3-Jaw Lathe Chuck

Skylarc Ref J177055

3-Jaw Lathe Chuck.
160mm outer diameter.
50mm inner bore.
80mm thickness.
15mm diameter mounting pins spaced 60mm apart on centre.
Includes inside and outside jaw sets and chuck key.

3MT Multi-point Centre

Skylarc Ref G174790

Length

200mm

Width

90mm

Height

50mm

3 M.T. Multi-point Centre.
Lathe centre with Morse Taper No.3 shank.
Includes main body with interchangeable tip holder.
Includes one large cone centre tip.
Includes five smaller cone centre tips.
Includes one plain cylindrical adaptor.
Includes one small tool or key.
Supplied in metal storage box with fitted insert.

2mm & 3mm Keyway Broaches w/ Accessories

Skylarc Ref G175414

2mm & 3mm Keyway Broaches.
Both are 130mm long.
Includes assorted mounting parts, see photos.

21x Ball Nose Milling Drills

Skylarc Ref M177084

21x Ball Nose Milling Drills.
Brands include Clarkson, Dormer, Sutton.
Shank diameters include 16mm, 12mm, 10mm, 6mm.
Overall well maintained and clean units.

21pc Counterbore Set 8.5–16.5mm 3617-0121

Skylarc Ref K174794

Length

170mm

Width

90mm

Height

70mm

21 piece counterbore set.
Label on box: 21Pc Counterbore.
Label on box: Size 8.5~16.5mm.
Label on box: 3617-0121.
Set includes multiple counterbore cutters.
Cutters are stored in a wooden box.
Visible cutter diameters marked in box include 8.5mm.
Visible cutter diameters marked in box include 9.5mm.
Visible cutter diameters marked in box include 10.5mm.
Visible cutter diameters marked in box include 11.5mm.
Visible cutter diameters marked in box include 13.5mm.
Visible cutter diameters marked in box include 16.5mm.
Set includes interchangeable pilot pins.
Box has hinged lid.

Albrecht 13mm Keyless Drill Chuck w/ No.3 Shank

Skylarc Ref G177130

Albrecht 13mm Keyless Drill Chuck.
Made in Germany.
No.3 Morse Taper Shank.
Very well maintained tool. Jaws move smoothly.

Samsung Galaxy A35 5G

Skylarc Ref B175669

Brand: Samsung
Model: Galaxy A35 5G
Model number: SM-A356E/DS
Internal storage capacity 128 GB
Memory capacity 6 GB RAM
Approximate available memory 2.4 GB RAM
USB-C charging and data port on bottom edge

NO CABLES OR CHARGER

Stoeger X20 air rifle with Stoeger 3-9x40 scope

Skylarc Ref W175846

Length

1080mm

Width

50mm

Height

130mm

Stoeger Mod X20 air rifle.
Rear adjustable sight.
Stoeger Airguns 3-9x40 scope fitted.
Scope has variable 3 to 9 times magnification.
Scope objective lens diameter 40mm.
Two-piece scope mounts fitted to receiver rail.
Break-barrel spring-powered action.
Surface rust visible on barrel and receiver.

Buyer must be over 18 years of age and be able to provide a copy of their appropriate photo ID on collection regardless of appearance.
We are unable to ship this item.

Machine vice

Skylarc Ref O176072

Length

240mm

Width

135mm

Height

70mm

V-75 machine vice.
Fixed base design.
Two parallel round guide rods.
Cast metal body with green finish.

Assorted Support Disks & Sanding Pad Base Attachments

Skylarc Ref S175114

Assorted Support Disks & Sanding Pad Base Attachments.
Brands include Flexipad and Taipan.
Includes angle Grinder pad attachments and sander/Polisher velcro base disks.
Diameters from 100mm to 180mm.
20x units are new in packaging and another 13x units appear unused but are without packaging.

25x Assorted Small / Mini Pliers

Skylarc Ref C177126

25x Assorted Small / Mini Pliers.
Needle nose, angled needle nose, circlip, end cutting Pliers, and more.
See photos for further details on types included and their size compared to the tape measure seen in most photos.
All were well maintained by previous owner.
Ages very greatly, some are recent while others are vintage or older.

Assorted Film.Grinding Disks

Skylarc Ref F175101

Assorted Film.Grinding Disks.
One partial box of 100mm P320 disks.
The remaining boxes of disks are all 150mm diameter wirh grits from 40 to 80.
Total count unknown, see photos
As new leftover workshop consumables stock.

Mitutoyo Universal Bevel Protractor Series 187

Skylarc Ref V176079

Length

360mm

Width

100mm

Height

25mm

Mitutoyo Universal Bevel Protractor.
Series 187.
Made in Japan.
Main body with circular protractor scale and vernier.
Vernier scale with magnifying glass attachment.
Stainless steel protractor body and blades.
Includes main protractor body.
Includes long straight blade.
Includes short acute angle attachment blade.
Supplied in fitted wooden storage case.
Includes Mitutoyo Universal Bevel Protractor Series 187 instruction sheet.
Minimum reading 5 minutes as stated in instruction sheet.
Main scale and vernier scale are on the same plane as stated in instruction sheet.
Main parts are hardened stainless steel as stated in instruction sheet.

Chesterman No 369 Height Gauge

Skylarc Ref V174805

Length

4110mm

Width

170mm

Height

90mm

Chesterman precision measuring tool.
Model No 369.
Made in Sheffield England.
Patent No 396514 marked on base.
In wooden storage case with Chesterman Precision Tools Sheffield England label on lid.
Main scale graduated in inches.
Scale marked to at least 50 units.
Sliding vernier mechanism fitted to the scale.
Base plate and end fixture in metal construction.
End fixture marked 1 1 2 inch.
Inserted gauge piece marked 350 inch.
Includes various metal attachments shown in photos.
Includes multiple small desiccant packets in the case.
Latch fitted to front of wooden case.
Hinges fitted at rear of wooden case.

11x Morse Taper No.3 Drills, Imperial Sizes

Skylarc Ref V177015

11x Morse Taper No.3 Drills.
Imperial Sizes from 13/16" to 1 ¼".
Condition varies with each drill.

Assorted 230mm Dia Cut Off & Grinding Disks

Skylarc Ref R175139

Assorted 230mm Dia Cut Off & Grinding Disks.
Includes:
- 9x PFERD EH 230-2.5 SG Steel + Inox disks.
4x PFERD E 230-7 PSF Steel + Inox grinding disks.
- 27x PFERD EHT 230-1.9 PSF Steel + Inox disks.
- 1x PFERD SG-Elastic EH 230-2.5 A 24 R SG-Inox.
- 14x Taipan TO-6244 disks, 230x1.9x22.23mm.
- 2x Taipan TO-6130 disks, 230x7.0x22.23mm.

All are unused stock, some are dusty from Workshop open storage, most appear expired.

320mm 4-Jaw Lathe Chuck

Skylarc Ref U175454

Length

320mm

Width

320mm

Height

140mm

320mm 4-Jaw Lathe Chuck.
90mm centre bore.
Mounting pin holes spaced 115mm apart on centre.
Includes jaw key.
Chuck in excellent condition and very well maintained.

JSN12 tapping attachment

Skylarc Ref C177568

Length

350mm

Width

200mm

Height

70mm

JSN12 tapping attachment.
Markings on body show JSN12.
Scale on body marked 1 to 4.
Body marking shows number 0712021.
Includes attached side torque arm.
Includes two flat spanners shown.
Tapered shank fitted to the attachment.
Collet style front holder fitted with a tap.

6.4x16.5mm Stainless Steel Blind Rivets, 750x Bulk Box, New

Skylarc Ref Z177071

6.4x16.5mm Stainless Steel Blind Rivets, 750x rivets in auction.
Daking branded box.
New unopened workshop Consumables stock.
See our other listings for more Bulk boxes of this type of Rivet.

Custom Workbench Workstation

Skylarc Ref Q174410

Length

1200mm

Width

1040mm

Height

1800mm

Custom Workbench Workstation.
Previously used in an electronic manufacturing facility.
Frame is made from 40x40mm square aluminium lengths.
Blue anti static surface755mm above floor.
Two angled rear shelves.
Top frame has clamps for mounting a light (light not included).
Powerboard attached underneath.
See photos for further design details.
See put other listings for more of these custom made workbenches.

Assorted Grinding Tips

Skylarc Ref I174506

Assorted Grinding Tips.
A variety of types and sizes, see photos.
Leftover unused workshop consumables stock.

3x Sets of Precision 1-2-3 Block Sets

Skylarc Ref I177106

3x Sets of Precision 1-2-3 Block Sets.
All blocks are 75x50x25mm with 10mm threaded bolt holes.
All appear as new.

Adjustable boring head with morse taper shank

Skylarc Ref B177567

Length

255mm

Width

75mm

Height

75mm

Adjustable boring head.
Morse taper shank.
Head body has four radial holes.
Head has a micrometer style adjustment dial marked 0 to 100.
Boring bar clamped in the head with a socket screw.
Shank end is internally threaded.
Shank has a longitudinal keyway.

6x Vintage Thread Pitch Gauge Sets

Skylarc Ref E175776

6x Vintage Thread Pitch Gauge Sets.
Includes:
- Moore & Wright No.801.
- Moore & Wright No.800.
- Moore & Wright No.799.
- Moore & Wright No.798.
- Japan made Screw Pit Gauge, brand and model not indicated
- Unknown brand set with black frame, a "Z" stamped into metal on one side, and other sise reads "M 0 4620".

All items in excellent condition.

Precision steel squares and frame level set

Skylarc Ref F175283

Length

300mm

Width

150mm

Height

150mm

Set of precision steel angle and square tools
Two Preisser DIN 875 II steel squares
One small steel square marked 360 Ng Nr.49
One steel L square marked ACRU MANCHESTER
One adjustable angle steel gauge in two pieces
One large steel square frame
Square frame includes fitted spirit level vial
Spirit level frame stamped MADE BY J O S M 1987
All items are unpainted steel except black inlay on ACRU square
Quantity and configuration as shown in photos
No accessories or storage case visible
Brand markings visible Preisser ACRU and 360 Ng
DIN 875 II marking indicates tolerance class on two Preisser squares
Engravings and markings are on the steel surfaces

Vintage 3-Phase Industrial Grinder

Skylarc Ref L177005

Length

800mm

Width

650mm

Height

1370mm

Vintage 3-Phase Industrial Grinder.
Unknown manufacturer and model.
250mm diameter grinding wheels mounted.
No.plug at end of cable so unable to test machine.
Dirty surfaces.

4x Yaskawa VS Mini J7 Variable Frequency Drives

Skylarc Ref H175181

4x Yaskawa VS Mini J7 Variable Frequency Drives.
Single phase 200V
0.55kW
120x67x127mm.
All are previously used. All are untested.

Metal Block in Wooden Case

Skylarc Ref O174798

Length

180mm

Width

130mm

Height

45mm

Metal rectangular block
Material appears metallic
Block stored in rectangular wooden case
Case has hinged lid
Case has metal latches
Block sits recessed into wooden base
Top surface of block appears flat
Exact dimensions not marked
Brand not marked
Model not marked
Intended use not marked

Portable Scaffolding Assembly by Gorilla

Skylarc Ref D175463

Length

1300mm

Width

555mm

Height

1255mm

Portable Scaffolding Assembly by Gorilla.
Model No.ML-ASC4.
Foldable aluminium frame.
2x aluminium platforms each 1300x215mm.

9x Assorted Milling Cutters

Skylarc Ref D177049

9x Assorted Milling Cutters.
Centre bores of 25mm and 16mmolus one threaded 10mm.
See photos for details on types of milling cutters included.

12 Ton Pipe Bender

Skylarc Ref Q174046

Length

610mm

Width

160mm

Height

550mm

Pipe bender
Label states 12 ton capacity
Label states usage range 12 in 34 in 1 in 1 14 in 2 in

Not the original handle

ER25 Collet Set with MT2 MT3 5C Holders

Skylarc Ref J175443

Length

250mm

Width

300mm

Height

100mm

ER25 collet set in wooden box
Label on box reads ER 25 Collets 1-16mm No. 2 & 3 MT 5C & S/L
Includes ER25 collet chuck marked J.O.M 01 with 1/8 Hex grub screw
Includes MT2 holder marked 2MT
Includes MT3 holder marked 3MT
Includes 5C holder marked 5C
ER25 collets present in metric sizes including 1-2mm 2-3mm 3-4mm 4-5mm 5-6mm 6-7mm 7-8mm 8-9mm 9-10mm 10-11mm 11-12mm 12-13mm 13-14mm 14-15mm 15-16mm
ER25 collets present in imperial sizes including 3/32 inch 1/8 inch 5/32 inch 3/16 inch 7/32 inch 1/4 inch 5/16 inch 3/8 inch 7/16 inch 1/2 inch 9/16 inch 5/8 inch
Wooden box has internal dividers for holders and collets
Metal spanner visible in box

Groz UG75 machine vice

Skylarc Ref X175665

Length

240mm

Width

140mm

Height

55mm

Brand: Groz
Model: UG75
Machine vice with fixed and movable jaws
Steel jaws with horizontal serrations
Cast base with four elongated mounting slots
Knurled steel handle

WEG CFW-11 Vectrue Inverter

Skylarc Ref B174395

Length

230mm

Width

185mm

Height

360mm

Brand WEG
Model CFW-11 Vectrue Inverter
Model number EUCFW110017T40FAZ
Material code 10574794
Serial number 1019560604
Input line voltage 380 to 480 V AC three phase
Input current 17 A nominal at 60 Hz for ND rating
Input current 13.5 A nominal at 60 Hz for HD rating
Output voltage 0 to line voltage three phase
Output current 17 A nominal for ND rating
Output current 18.7 A to 25.5 A for ND rating at 60 s to 10 s
Output current 13.5 A nominal for HD rating
Output current 20.3 A to 27 A for HD rating at 60 s to 10 s
Frequency range 0 to 300 Hz
Supply frequency 50 or 60 Hz
Maximum ambient temperature 50 degrees Celsius
Weight 9.1 kg

NTB metal block with plates and pins in wooden box

Skylarc Ref I174818

Length

185mm

Width

75mm

Height

60mm

NTB marked metal block
Block has five circular through holes
Block has two cylindrical end pieces
Two rectangular metal plates included
Each plate has two circular holes
Four metal pins or screws included
Set supplied in rectangular wooden box
Box has hinged lid
Box has metal hook latch on front
Interior of box is lined with green material

Mitutoyo 103-183A 6-7" Outside Micrometer

Skylarc Ref Z174809

Length

350mm

Width

210mm

Height

50mm

Brand Mitutoyo
Model number 103-183A
Type outside micrometer
Measuring range 6 to 7 inches
Resolution 0.001 inch
Scale mechanical analog thimble and sleeve
Includes 6 inch setting standard No.167-146
Includes spanner wrench
Made in Japan
Supplied in fitted plastic case with foam insert

Antique Motorized Hacksaw

Skylarc Ref K175470

Length

950mm

Width

510mm

Height

1220mm

Antique Motorized Hacksaw.
Made un USA by M.F. Co, Miller's Falls, Massachusetts.
Patent dates of 1893 and 1892, manufacture year of this specific machine is unknown.
Machine restored by Joc Miller, Timaru in 1957.
Hacksaw blade length approx 310mm.
Single phase vintage Newman Elf electric motor model F1112191.
Powres on and runs smoothly, see video. Motor gives off ozone smell after a short time running.

Moore and Wright Combination Square Set

Skylarc Ref I176092

Length

250mm

Width

150mm

Height

50mm

Brand: Moore and Wright.
Manufactured by Moore and Wright Sheffield Ltd England.
Precision Tools branding on wooden case lid.
Combination square set with protractor head.
Protractor head marked with degree scale 0 to 180.
Protractor head includes spirit level vial.
Square head includes spirit level vial.
Set includes square head.
Set includes protractor head.
Set includes centre head.
Set includes steel rule.
Steel rule length marked to 12 inches.
Wooden storage case included.
Metal clamp part included as shown.

200mm Lathe Face Plate

Skylarc Ref P177009

200mm Lathe Face Plate.
35mm thickness.
T-slot widths are 12mm and 24mm.
Includes mounting bolts spaced 125mm appart on centre.

Wooden Workshop Workbench w/ Vice

Skylarc Ref I177002

Length

2450mm

Width

990mm

Height

1550mm

Wooden Workshop Workbench w/ Vice.
Thick wood board frame with 45mm thick wood board top surface 1005mm above floor.
2mm thick sterl sheet on right side with a Record No.5 vice mounted.

Assorted Cutters

Skylarc Ref D175853

Largest approx 150mm diameter

58x Vintage or Antique Steel Files

Skylarc Ref W177120

58x Vintage or Antique Steel Files.
Wide range of sizes and types. Longest up to 495mm, shortest 220mm.
Visible Brand markings include Wiltshire, Nicholson, Simonds, Cyclops, F.B. Tools, J.J. Seville, Beaver to name some.
Ages of files are unknown.

6.4x16.5mm Stainless Steel Blind Rivets, 750x Bulk Box, New

Skylarc Ref Y177070

6.4x16.5mm Stainless Steel Blind Rivets, 750x rivets in auction.
Daking branded box.
New unopened workshop Consumables stock.
See our other listings for more Bulk boxes of this type of Rivet.

36x 380mm Roller Tracks

Skylarc Ref L175029

36x 380mm Roller Tracks.
Aluminium frames with plastic end caps, each frame is 385x40x35mm.
Each frame has 35mm diameter, 20mm wide orange plastic rollers.
36x units in auction.
See our other listings for more Bulk lots of these rollers.

PFERD Aluminium Oxide Mounted Flap Wheels, 13x units

Skylarc Ref O175136

PFERD Aluminium Oxide Mounted Flap Wheels.
13x total units in auction.
All are Type No. F 8030/ 6 A 60.
80x30x6mm.
New unused stock.
One full box of 10x wheels plus a partial box of 3x wheels.

IMS-12" Inside Micrometer Set

Skylarc Ref A174810

Length

300mm

Width

150mm

Height

35mm

IMS-12" inside micrometer set.
Code No 141-109.
Made in Japan.
Micrometer head marked JAPAN and 15.
Micrometer head with knurled thimble and lock.
Set includes multiple interchangeable extension rods.
Extension rods are metal with knurled ends.
Wooden storage case with fitted wooden inserts.
Case includes small metal spanners.
Includes desiccant packet in case.

Nippy machine vise

Skylarc Ref R175295

Length

250mm

Width

150mm

Height

60mm

Brand: Nippy
Type: machine vise
Material: metal construction
Actuation: leadscrew with knurled handle
Jaw type: V grooved jaws
Jaw width approximately 100mm based on tape measure
Overall body length approximately 190mm excluding handle based on tape measure
Base features longitudinal T slot style clamping grooves
Base underside has central recess and mounting holes
Handle has transverse hole near end
Jaws are secured with cap screws
Leadscrew passes through central channel in base
Colour: blue painted base with bare metal jaws and handle

Daylight Omega 7 Magnifier LED Desk Lamp

Skylarc Ref J175001

Daylight Omega 7 Magnifier LED Desk Lamp.
Manufactured by Daylight.
"The Omega 7 is is part of the Daylight range of magnifying lamps and is modern and ergonomically designed. It has a large 17.5 cm, 3 dioptres (1.75X), lightweight acrylic lens and high power LEDs with 4 brightness level for clear viewing. The internal spring arm allows accurate positioning and lateral protections help you keep it clean. The aesthetically pleasing white and grey finish fits perfectly within any professional environment."
- Acrylic lens with anti-scratch coating
Lens Ø 17.5 cm
- 3 Dioptres (1.75X)
- 4 Brightness levels
- Covered arms with internal springs
- Long reach 118 cm

https://www.daylightlamps.co.nz/products/omega-7-magnifier?variant=46700497436827

32x Mill Slitting Saw Blades

Skylarc Ref B177047

32x Mill Slitting Saw Blades.
Outer diameters from 26mm to 76mm.
See photos for further detils on types, brands included.

Watts London 8" Precision Block Level No 70617

Skylarc Ref Y176082

Length

250mm

Width

60mm

Height

60mm

Brand Watts London.
Model 8" Precision Block Level.
Serial or identification number 70617.
Made in England.
Main vial marking DIV = 0.0005 in in 10 in.
Main vial marking 0.05 mm per metre.
Body has machined V groove base.
Includes fitted case shown in photos.

9x Morse Taper Drill Sleeves

Skylarc Ref U177118

9x Morse Taper Drill Sleeves
Includes:
- 1x Jacobs England No.3 shank for a drill chuck with a 20mm diameter inner mounting bore.
- 1x 1-2
- 4x 2-3
- 1x 3-4
- 1x 3-4 extention
- 1x 4-4 extention

SEW-Eurodrive DRE100L4KS Motor with Gearbox

Skylarc Ref I175390

Length

525mm

Width

250mm

Height

230mm

Brand SEW-Eurodrive
Motor model DRE100L4KS
Gearbox manufacturer SEW-Eurodrive
Motor nameplate shows standard IEC60034-1 marking
Voltage rating on motor nameplate 230D 400Y
Motor protection rating IP65 on nameplate
Motor nameplate shows 50Hz
Plug brand Clipsal
Plug model 56PA432
Plug current rating 32A
Plug voltage rating 500V
Plug frequency rating 50Hz
Plug protection rating IP66
Motor is fitted with attached gearbox
Output shaft has jaw type coupling fitted
Unit is painted blue
Power cable with 3-pin industrial plug attached
Motor and gearbox mounted on foot base

2x Vintage 1/4" & 3/8" Drive Torque Wrenches

Skylarc Ref R177141

2x vintage torque wrenches.
Larger tool is 3/8" Drive Torque Wrench marked as Genuine Repco Product manufactured tured by Warren & Brown Ltd, Australia and is Model No.3210A., 340mm total tool length.
Smaller tool is 1/4" Drive missing drive socket pin insert, see photo. Also made by Warren & Brown Ltd, model not marked, tool length 175mm.

17x Dovetail Milling Cutters + Curved Keyset Cutter

Skylarc Ref N177085

17x Dovetail Milling Cutters plus one curved keyset cutter.
2x Dovetails are reverse head type.
Shank diameters include 16mm, 12mm, 10mm.
See photos for specific head sizes/types.
Very clean and well maintained units.

Involute Gear Cutter set m0.5x20 degree

Skylarc Ref S177064

Involute Gear Cutter set m0.5x20 degree
Includes:
- No.1, Z12-13.
- No.2, Z14-16.
- No.3, Z17-20.
- No.4, Z21-25.
- No.5, Z26-34.
- No.6, Z35-54.
- No.7, Z55-134.
- No.8, Z135- Infinity.
- all above have 13mm inner bore.

See photos for details on markings on each cutter.
Cutters appear near new with little to no visible signs of prior usage.

Lathe Spin Index Fixture Collet w/ 16mm Golden Goose Chuck

Skylarc Ref O177008

Lathe Spin Index Fixture Collet.
Type No.PF70-5C.
Includes attached 16mm Golden Goose Drill Chuck with Chuck key.

Genevas centering indicator set

Skylarc Ref F174789

Length

230mm

Width

115mm

Height

65mm

Brand: Genevas
Dial indicator reads 0.01 mm per division
Dial scale marked from 0 to ±45 units
Centering indicator body with integral dial gauge
Taper shank fitted to the centering indicator body
Set of multiple contact stems included
Includes straight contact stems
Includes curved contact stems
Includes black contact stem with knurled adjustment head
Small open ended spanner included
Paper instruction sheet included
Supplied in a wooden dovetailed storage box
Box has metal latches on the front
Box front label marked Centre finder
Foam insert in box with cutouts for components

MX M Thread 25-50 60 55 Micrometer Set

Skylarc Ref H175259

Length

220mm

Width

110mm

Height

50mm

Brand MX.
M Thread 25-50 60/55 marked on case plate.
Micrometer frame with interchangeable anvils.
Metric reference standard marked 25mm 60°.
Set includes multiple pointed and slotted tips.
Includes two circular washers.
Supplied in fitted black plastic case with foam insert.

Hafco Workbench Table 1200x750mm

Skylarc Ref X173507

Length

1200mm

Width

750mm

Height

890mm

Hafco Workbench Table w/ Anti Static Top Surface.
Heavy duty sterl frame.
Adjustable feet.

14x Corner Rounding Mill Cutters

Skylarc Ref O177086

14x Corner Rounding Mill Cutters.
Brands include Clarkson, Trubor, Domer, Somta.
Shank diameters include 16mm, 12mm, 20mm.
All appear very well maintained and clean.

PFERD 125mm Polifan Flapdisks, 9x Units

Skylarc Ref N175135

PFERD 125mm Polifan Flapdisks.
9x disks in auction.
All are type PFR 125-L Z 40 SGP Curve Steelox.
New unused stock.

Sandvik ER16 Collet Set 1–10 mm

Skylarc Ref J174793

Length

190mm

Width

170mm

Height

80mm

Brand: Sandvik Coromant
Type: ER16 collet set
Collet size range: 1 mm to 10 mm
Individual collets marked 2 mm 2.5 mm 3 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm
Wooden box label: ER16 COLLETS 1–10 mm
Wooden box label: 20 dia x 100 (&5C) and 2 MT
Set includes multiple ER16 collets as shown
Set includes at least two ER16 collet chucks as shown
Supplied in wooden storage box

Lufkin No 79B Telescoping Gage Set

Skylarc Ref M174822

Length

150mm

Width

150mm

Height

10mm

Brand Lufkin
Model No 79B
Telescoping gage set
Six telescoping gages
Knurled steel handles
T handles on gages
Supplied in red fold-over case
Case has snap fastener
Marking on case reads Lufkin Telescoping Gage No 79B

Vintage Bench Grinder w/ Stand by J.O. Miller, Timaru

Skylarc Ref W175456

Length

500mm

Width

330mm

Height

1160mm

Vintage Bench Grinder.
Nade in New Zealand in 1970 by J.O. Miller, Timaru.
Compatible with grinding disks up to 150mm diameter.
Single phase.
Belt driven.
Very well maintained vintage unit.
No disk guards included.

Assorted Morse Taper Shanked Drills & Reamers

Skylarc Ref T177013

Assorted Morse Taper Shanked Drills & Reamers.
5x Reamers with shank sizes from No.1 to No.3.
5x Imperial size drills with No.2 shanks.
1x Imperial drill with No.1 shank.
2x Tapered shank adapters, see photos.
Condition varies greatly with each unit. Note that a shank sleeve on one of the Reamers is cracked, see photo

Involute Gear Cutter set m2.5x20 degree

Skylarc Ref D177075

Involute Gear Cutter set m2.5x20 degree
Includes:
- No.1, Z12-13.
- No.2, Z14-16.
- No.3, Z17-20.
- No.4, Z21-25.
- No.5, Z26-34.
- No.6, Z35-54.
- No.7, Z55-134.
- No.8, Z135- Infinity.
- all sbove have 22mm inner bore.

Also includes a 1.25 17 to 20T 20 degree cutter No.6 with 25mm bore.
See photos for details on markings on each cutter.
Cutters appear near new with little to no visible signs of prior usage. Some light protective oil residue on some units.

46x 900mm Roller Tracks

Skylarc Ref I175026

46x 900mm Roller Tracks.
Steel frames each 900x36x25mm.
Each Includes 25mm diameter 20mm wide orange plastic rollers.
46, roller tracks in auction.

Fabrex 413 Machine Vice

Skylarc Ref C174786

Length

200mm

Width

100mm

Height

35mm

Brand: Fabrex.
Model marking: 413.
Type: screw operated bench or machine vice.
Body material appears to be cast metal.
Fixed and moving jaws are metal.
Knurled handle on threaded leadscrew.
Base has two elongated mounting slots.
Underside casting marked MADE IN ENGLAND.
Overall length approximately 220mm based on tape in photo.
Colour: green painted body with bare metal jaw faces.

Mill Lock Down Set

Skylarc Ref J175261

Length

310mm

Width

100mm

Height

200mm

Clamping kit with steel storage rack
Multiple T nuts shown
Multiple step blocks shown
Multiple clamping studs shown
Multiple flange nuts shown
Multiple clamping claws shown
Steel rack has keyhole slots for mounting
Steel rack base supports all components
All components are metal construction
Exact sizes and thread types are not marked
Brand and model are not marked

Grundfos ALPHA2 25-60 N 180 circulator pump

Skylarc Ref C174864

Length

200mm

Width

110mm

Height

180mm

Brand: Grundfos
Model: ALPHA2 25-60 N 180
Type: Circulator pump
Control: AUTOADAPT function shown on display
Includes Grundfos ALPHA 1/2/3 instruction manual
Includes two circular gaskets

Vintage Benchtop Disk Grinder

Skylarc Ref P175449

Vintage Benchtop Disk Grinder.
Appears to be a custom built Assembly.
1/12hp Marathon branded single phase electric motor.
155mm diameter grunding/sanding disk.
205x100mm table.
Overall dimensions are approx 390x205x220mm.
Vintage cloth type power cord.
The unit operates but the power cord should be replaced for safety.

Engineering Black Granite Leveling Plate

Skylarc Ref K175418

Engineering Black Granite Leveling Plate.
Unknown manufacturer.
302x230x60mm.
Pads on bottom.
Excellent condition. No edge or corner chips.

Sanding Sleeves & Caps, Bulk Lots

Skylarc Ref J175105

Sanding Sleeves & Caps.
Sleeve diameters include 20mm, 28mm, 40mm, 54mm. Widths are all 26mm.
Also Includes 3x boxes of PFERD sanding caps in two sizes of 17mm a d 23mm.
As new leftover workshop bulk.stock.
Total.counts of items is unknown.

V Blocks

Skylarc Ref O177554

Length

250mm

Width

80mm

Height

50mm

Smaller pair approx 50mm x 35mm x 35mm
Larger single approx 60mm x 67mm x 50mm

Assorted countersinks and end mills on wooden block

Skylarc Ref J175287

Length

120mm

Width

55mm

Height

100mm

Assorted metal cutting tools on wooden block
Includes multiple countersinks and end mills
One tool marked 7/16 AUSTRALIA
One tool marked 1/2 W2 KOREA
One tool marked 7/8 x 60° USS ENGLAND
One tool marked 1/4 x 3/8 M42 L-0-45S
One tool marked 1/4 x 3/8 M42 L-0-45S
One tool marked 3/8 M42
One tool marked 5/16 x 3/8 M42 L-0-567
One tool marked 3/8 M42 L-0-???
Wooden block drilled with 10 vertical holes to hold tools
Quantity of cutting tools is as shown in photos

Mitutoyo 505-646-50 Dial Caliper

Skylarc Ref G175258

Length

250mm

Width

95mm

Height

30mm

Brand: Mitutoyo
Model: 505-646-50
Type: Dial caliper
Country of manufacture: Japan
Resolution: 0.02 mm
Dial marking: JEWELED
Scale length: 150 mm
Blade marking: STAINLESS HARDENED
Includes metal dial caliper
Includes red plastic storage case
Includes printed documentation shown

Safeway DV-100 machine vise

Skylarc Ref W175664

Length

275mm

Width

140mm

Height

85mm

Brand Safeway
Model DV-100
Machine vise
Screw operated with T-handle
Steel jaws

Assorted Vintage Precision Engineers Tools

Skylarc Ref Q175710

Assorted Vintage Precision Engineers Tools.
Moore & Wright No.825A and 825B centre finders.
Moore & Wright No.417 diemakers square.
Starrett No.453 square set.
Starrett combination Bevel gauge, unknown model.
Starrett Bevel gauge, unknown model number.
Starrett Pat 4'02 tool.
Vintqge magnifier.
Vintage tools in excellent near new condition.

Hakko FX-888 Soldering Station

Skylarc Ref I174896

Brand: Hakko
Model: FX-888
Power rating: 70W
Input voltage: 230V
Frequency: 50Hz
Made in Malaysia
Base unit with temperature control dial
Temperature scale marked from 250 to 480 degrees Celsius
Temperature scale also marked from 480 to 900 degrees Fahrenheit
ESD safe base unit
Includes Hakko soldering iron handpiece
Includes metal soldering iron holder
Includes sponge-style tip cleaning pad
Multiple soldering tips shown in holder compartment
Power cord attached to base unit
Soldering iron cable attached to base unit
Model number label: FX888-20BY
Approval number NSW24227
Manufacturer: Hakko Corporation

Mobile Shelf Trolley

Skylarc Ref R175035

Length

570mm

Width

450mm

Height

1045mm

Mobile Shelf Trolley.
25x25mm box steel frame.
125mm diameter wheels.

Angle Plate - Pair

Skylarc Ref J177575

Each approx 115 x 75 x 87mm

2x Vintage Cast Iron Milling Angle Plates

Skylarc Ref U177092

2x Vintage Cast Iron Milling Angle Plates.
Larger plate is branded Eclipse No.201, made in England, and measures 115x90x77mm.
Smaller unmarked plate measures 113x78x65mm.
Both are very clean and dry and rust free for their apparent age.

Assorted Taps

Skylarc Ref I176014

Length

175mm

Width

90mm

Height

25mm

Largest M24 X 3

Seco SEKR1203AFTN-ME13-76 S25M inserts

Skylarc Ref M176096

Length

90mm

Width

40mm

Height

30mm

Brand Seco
Model SEKR1203AFTN-ME13-76 S25M
Marking SEKR 42AFTN-76 S25M
EDP 17145 on each box
Each box label states quantity 10
Three plastic insert boxes included
Packaging shows manufacturer and distributor printing only
No other specifications are visible on the packaging

Autolock No.2 Morse Type S Collet Chuck Sets

Skylarc Ref M174796

Length

250mm

Width

250mm

Height

120mm

Autolock No.2 Morse Type S collet chuck
Marked BRPAT 315713
Marked ENGLAND 3/8 BSW
Includes one Autolock No.2 Morse Type S chuck body
Includes one additional No.2 Morse Autolock chuck body
Both chucks have threaded bodies and knurled nuts
Metric collets included 6mm
Metric collets included 8mm
Metric collets included 10mm
Metric collets included 12mm
Metric collets included 16mm
Imperial collets or inserts included 1/4 inch
Imperial collets or inserts included 3/8 inch
Imperial collets or inserts included 1/2 inch
Imperial collets or inserts included 5/8 inch
Includes Autolock marked spanner
Includes second unmarked spanner
Supplied in two blue metal storage boxes
Boxes externally marked Imperial 2MT and Metric 2MT

Platinum Electric Cable Hoist PA300D

Skylarc Ref H175727

Brand: Platinum
Model: PA300D
Type: electric cable hoist.
Input power: 550W
Voltage: 230V 50Hz
Current: 2.4A
Lifting capacity single line: 150kg.
Lifting capacity double line: 300kg.
Lifting height single line: 12m.
Lifting height double line: 6m.
Lifting speed single line: 8m per minute.
Lifting speed double line: 4m per minute.
Work rate: S3 20 percent 10 minutes
Insulating grade: B
Protecting grade: IP54
Rope diameter: 3.0mm.
Rope breaking force: greater than 750kg.
Fitted with steel wire rope
Includes wired pendant control with emergency stop button
Single phase mains power plug attached
CE GS and EMC markings on rating label
Year code on rating label: 2916.
Operational condition unknown. Some oil leaking from around the gasket between ter motor and gearbox, see photo.

155mm 3-Jaw Lathe Chuck on 275mm Mounting Disk

Skylarc Ref Q177010

155mm diameter 3-Jaw Lathe Chuck.
Mounted onto a 275mm diameter disk. Four 11mm diameter mounting holes spaced 155mm appart on centre.
Three Mounting bolts for chuck to disk spaced 90mm appart.
40mm inner chuck bore.
Jaw key is missing.

46x Sets of Motorcycle Brake Pads, Assorted Brands & Sizes

Skylarc Ref A174134

46x Sets of Motorcycle Brake Pads.
Assorted Brands & Sizes, see photos.
As new leftover shop retail parts stock.
Some packaging shows display rack storage wear.

12U Rack Mount Enclosure Flatpack

Skylarc Ref U175038

12U Rack Mount Enclosure Flatpack.
Code No.HB5174.
Assembled unit should measure 530x450x626mm.
As new unassembled flatpacked in box. Box has been opened by vendor and shows storage wear.

TM Toolmaster M250 Parallels Set

Skylarc Ref K174820

Length

180mm

Width

135mm

Height

80mm

Brand: TM Toolmaster.
Model marking on box: M250.
Item type: Parallels set.
Box label text: Parallels 1/1·25/1·5/1·75.
Supplied in a wooden storage box with latch closure.
Multiple steel parallel bars included.
Some bars have through holes.
Foam padding is fitted in the box lid.

Vintage Steel Hand Files & Brushes

Skylarc Ref R177115

Vintage Steel Hand Files & Brushes.
File lengths up to approx 320mm.
Most items appear to be of older vintage.
Over 65+ files.
Assorted loose wood handles.
9x vintage steel bristle brushes.

Steel & Aluminium Magnetic V-Block & Parrallel Set

Skylarc Ref J175417

Steel & Aluminium Magnetic V-Block & Parrallel Set.
V-blocks each 60x50x47mm.
Parrallels each 100x50x25mm.

Metal Parallel Bars Set in Wooden Case

Skylarc Ref Q175658

Length

265mm

Width

185mm

Height

60mm

Set of metal parallel bars.
Smallest approx 152mm x 22mm x 12mm
Largest approx 152mm x 45mm x 12mm

125mm 3-Jaw Lathe Chuck

Skylarc Ref K177056

3-Jaw Lathe Chuck.
125mm outer diameter.
30mm inner bore.
80mm thick body.
3x 15mm mounting pins spaced 60mm apart on centre.
Includes internal and external jaw sets.
Note that chuck key is missing.
Chuck very clean and well maintained.

6" Universal Surface Grinder

Skylarc Ref G175856

Length

320mm

Width

320mm

Height

320mm

Brand: Universal Surface.
Model: 6" Universal Surface Grinder.
Motor current rating: 2.0 Amp.
Motor speed: 2700 RPM.
Phase: 1 PH.
Horsepower: 1/3 HP.
Voltage: 214 V.
On off rocker switch on base.
Round grinding wheel mounted on top plate.

Fowler Magnetic V-Block

Skylarc Ref F174815

Length

100mm

Width

75mm

Height

100mm

Brand Fowler
Magnetic V block
On off rotary switch on front face
Switch plate marked Fowler and ON OFF positions
V groove on top for holding round workpieces
Ground metal faces on top and sides
Rectangular body with red textured finish
No accessories included

M 0-100mm Depth Micrometer Set

Skylarc Ref C175254

Length

180mm

Width

130mm

Height

35mm

Depth micrometer marked M 0-100mm Depth Mike on case
Micrometer base marked 0-25mm and 0.01mm resolution
Micrometer body has 0 to 25mm scale on barrel
Set includes three extension rods stored in the case
Set includes cylindrical standard marked 25mm
Set includes cylindrical standard marked 49.95mm
Micrometer and accessories supplied in wooden fitted case

2x Sets of Vee Blocks

Skylarc Ref C177100

2x Sets of Vee Blocks.
Smaller set is branded G.C. Martin and marked with a 0 (Zero), both blocks are 37.5x30x30mm.
Larger block set has no ID markings and each are 50x41x31mm.
Both sets are very clean and dry. Small set appears unused.

Starrett Dividers and Calipers Set

Skylarc Ref Y175276

Length

200mm

Width

50mm

Height

50mm

Brand: The L S Starrett Co
Manufactured in Athol Mass U S A
Set includes four small Starrett spring dividers and calipers
Set includes one large Starrett outside caliper
All tools are metal construction
All tools have screw adjustment mechanisms
Markings include STARRETT and THE L S STARRETT Co ATHOL MASS U S A
Tools are shown together in the first photo
Close up photos show the maker markings and adjustment screws
Exact model numbers and sizes are not marked or not visible
Quantity in this lot is five pieces total

50 Lamson Storage Bins - Size 5

Skylarc Ref H175389

50 Size 5
Assorted colours

Assorted Taper Pin Reamers

Skylarc Ref M177110

Assorted Taper Pin Reamers.
21x units in two wood cases.
Lengths from 42mm to 235mm.

3x Magnetic & Non-magnetic Gauge Stands + 1x Mitutoyo Dial Gauge

Skylarc Ref W177016

3x Magnetic & Non-magnetic Gauge Stands.
Non magnetic stand wirh weighted base is 145mm tall.
1x Arch Japanese made magnetic base with 230mm tall main rod with a 150mm long adjustable secondary rod.
1x Mitutoyo Dial gauge No.2046F.
1x smaller magnetic Base with attached flexable arms wirh total height of approx 210mm.

UNI-T UT804 bench multimeter

Skylarc Ref H174219

Length

300mm

Width

240mm

Height

100mm

Brand: UNI-T
Model: UT804
Bench digital multimeter
Front LCD display
Rotary selector switch for measurement functions
Measurement functions include V A Ω Hz duty °C °F
10 A max current input terminal
μA and mA current input terminal
Voltage and resistance input terminal
COM terminal
Front panel AC DC selection button
RS232C interface on rear panel
USB interface on rear panel
Rear power input 200-240 V AC 50 Hz
Rear DC input 7.5-10 V DC 3 W
Rear panel fuse rating F3 200 mA 250 V power fuse IEC 60127
Integrated carry stand and tilt bail

No power cable - The one visible on photos is for testing purposes

Horex Internal Micrometer Set 5–50 mm

Skylarc Ref F175257

Length

190mm

Width

105mm

Height

35mm

Brand Horex
Artikel-Nr 1632002
Internal micrometer set
Measuring range 5–30 mm head
Measuring range 25–50 mm head
Ring gauge marked 5 mm and 25 mm
Wooden storage case included
Foam insert in case
Case label text Innenmeßschraube mit einseitigem Schnabel 25–50 mm 5–30 mm
Two interchangeable measuring heads marked 5–30 and 25–50
Micrometer thimble with knurled grip
Locking screw on micrometer body
Includes small hex key
Includes additional small metal accessory
Includes two wooden spacers

Woodcut Tools Tru-Grind CBN Grinding Wheel, 150mm, 180g

Skylarc Ref I175416

Woodcut Tools Tru-Grind CBN Grinding Wheel.
180 grit.
150 x 25.4 x 12.7mm Wheel.

110mm 4-Jaw Lathe Chuck

Skylarc Ref F177051

110mm 4-Jaw Lathe Chuck.
Made in England by Burnerd.
30mm inner bore.
29mm thickness.
8mm mounting holes spaced 40mm apart on centre.
Includes chuck key.

Assorted End Mills, Reamers, Countersinks, & More

Skylarc Ref Q177036

Assorted End Mills, various type Reamers, Countersinks, screw extractor, and other similar items, see photos

Powered Hacksaw

Skylarc Ref H177547

Length

1300mm

Width

440mm

Height

900mm

Powered metal cutting hacksaw machine
Belt driven from an electric motor mounted under the frame
Chain and sprocket drive to the saw feed mechanism
Reciprocating saw arm with green painted frame
Vise assembly with two vertical threaded clamping screws
Cast metal base with four mounting feet
Saw arm guided on vertical slide at one end
Drive motor connected to mains power via attached cable and plug
Flat belt connects motor pulley to main drive pulley
Blade length approx 350mm

Turns on however screw that secures pulley wheel won't tighten so wheel comes off

3x Vintage Thread Restoring Files by Jaw Manufacturing Co

Skylarc Ref J177107

3x Vintage Thread Restoring Files by Jaw Manufacturing Co.
Each is 215mm long.
Includes File No.1 for 11, 12, 13, 14, 16, 18, 20, a d 24 threads per inch.
Includes file No.2 for 9, 10, 12, 16 20, 27, 28, and 32 threads per inch.
Includes No.8 Metric for 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, and 3mm threads.
Tools apoear excellent condition. Their original vintage packaging shows long term storage wear.

1200x900mm Double Sided Mobile Whiteboard by Boyd Visuals

Skylarc Ref X175015

Length

1260mm

Width

550mm

Height

1760mm

1200x900mm Double Sided Mobile Whiteboard by Boyd Visuals.
Magnetic backing.
Marker tray on one side.
Locking castor wheels

Ryobi 20L Wet Dry Shop Vac Vacuum

Skylarc Ref I175182

Ryobi 20L Wet Dry Shop Vac Vacuum.
See photos for included attachments.
Previously used in an electronics production facility.

Assorted drill bits

Skylarc Ref R176023

Assorted twist drill bits
Brand marking on some bits reads Sutton
Some drill bits marked HSS
One drill bit marking reads 22 mm
One drill bit marking reads 1 inch HSS
Twist drill geometry
Mixed sizes
Parallel shank drills
Drill bits shown on a board with drilled holes
Longest drill bit approximately 200 mm long

Vintage 3-Phase Pedistal Grinder / Buffer

Skylarc Ref S175634

Length

870mm

Width

400mm

Height

1100mm

Vintage 3-Phase Pedistal Grinder / Buffer.
Unknown brand, model and age.
20A 3-phase plug attached.
Originsl.on/off switch on one side with a newer on/off switch added to back side.
One end has safert guard still attached and has a 180mm wire brush wheel mounted.
Opposing end is open eith no guard and had a approx 200mm diameter wire brush wheel as well as a 160mm bugging pad wherl attached.
Very dirty surfaces but machine operates as normal.

TTC Adjustable Parallels Set with Starrett Inserts

Skylarc Ref E174814

Length

230mm

Width

130mm

Height

20mm

Brand TTC adjustable parallels set.
Made in Japan as marked on case label.
Includes six adjustable parallel bodies marked A to F TTC.
A TTC parallel body.
B TTC parallel body.
C TTC parallel body.
D TTC parallel body.
E TTC parallel body.
F TTC parallel body.
Parallel A is fitted with a Starrett insert No.154-A.
Starrett No.154-A marked The L.S. Starrett Co Ltd Great Britain.
Parallel C is fitted with a Starrett insert No.154-C.
Starrett No.154-C marked The L.S. Starrett Co Ltd Great Britain.
Parallel D is fitted with a Starrett insert No.154-D.
Starrett No.154-D marked L.S. Starrett Co Athol Mass USA.
Set supplied in blue plastic wallet.
Wallet has individual pockets labeled with metric size ranges.

Vintage Record No.52 1/2 E Woodworking Vice

Skylarc Ref O177060

Vintage Record No.52 1/2 E Woodworking Vice.
Made in England.
Steel jaws approx 228mm wide
Total jaw width with wood 305mm.
Total vice length when closed approx 560mm.
Well maintained vintage tool. Jaws move smoothly.

Assorted Plastic Storage Bins

Skylarc Ref C177022

Assorted Plastic Storage Bins.
Includes:
- 2x black bins with no lids, each 430x340x220mm.
- 9x black bins with 9x lids each 540x410x320mm.
- 11x Sistema 14-litre bins with 13x lids each 494x322x138mm.
- 4x Sistema 7.9 litre bins, three with lids and tray inserts, and a fourth with no tray or lid, each bin 320x240x130mm.
- 3x Small clear storqge with blue bins with lids, each 225x155x50mm.
- 2x Small clear bins with blue lids, each 160x160x90mm.

WM400 Industrial Class AC Welding Plant

Skylarc Ref I174948

Length

800mm

Width

350mm

Height

810mm

Model WM400 industrial class AC welding plant
Part number WM400
Serial number WM 400 with final digits obscured
50 Hz single phase AC input
Input voltage rating 415 V
Input current rating 55 A
Max short circuit current 89 A
Recommended supply cable size 6 mm2
Amperage range high scale 135 A to 400 A
Amperage range low scale 90 A to 365 A
Open circuit volts high 54 V
Open circuit volts low 76 V
30 percent duty cycle rated output current 400 A
30 percent duty cycle load volts 36 V and 31 V
100 percent duty cycle output current 220 A and 150 A
100 percent duty cycle load volts 29 V and 26 V
Fitted with welding leads
Fitted with electrode holder
Fitted with work clamp
Unit is mounted in a blue metal cabinet with vents
Cabinet is on fixed wheels
Power connector marked 32 A 500 V 50 Hz IP66 56PA432

Weg 0.25kW Electric 3-Phase Motor, As New

Skylarc Ref L175185

Weg 0.25kW Electric 3-Phase Motor.
Model No.T2000025B3.
Manufactured 03/2005.
24mm long, 12mm diameter shaft.
Overall dimensions are 190x175x122mm.
Motor appears as new unused but dusty on one side from long term open box storage.
Includes original box.

Mitee-Bite 12mm T-Slot Kit Metric PN 50646

Skylarc Ref E174788

Length

200mm

Width

120mm

Height

25mm

Manufacturer Mitee-Bite Products Company
Product Mitee-Bite T-Slot Kit
Part number 50646
Type 12mm T-Slot Kit Metric
Includes MB-8M fixture clamps as shown on insert
Includes TSN-12M tee-slot clamps as shown on insert
Includes hexagonal clamp elements visible in case
Includes small hex key visible in case
Case label shows U.S. Patent 4,805,888
Made in U.S.A. as printed on insert
Supplied in black plastic carry case
Operating instructions printed on inside of lid

2x Vintage Brass Parafin Blow Torches by Primus, Sweden

Skylarc Ref O175448

2x Vintage Brass Parafin Blow Torches.
Both made in Sweden by Primus.
The larger unit is model.No.607 and is approx 305x140x360mm.
The smaller unit is Model.No.633 and is approx 235x110x210mm.
Both are untested.

Assorted twist drill bits

Skylarc Ref P176099

Length

250mm

Width

170mm

Height

50mm

Lot of assorted twist drill bits.
Mixed sizes from small diameter to larger diameter.
Straight shank configuration on all visible bits.
Flute geometry appears standard right hand twist.
Material appears to be high speed steel.
Bits are unbranded or branding not clearly visible in images.
Quantity is approximately as shown in the photos.

Mitutoyo depth micrometer set 0.01mm

Skylarc Ref X176081

Length

270mm

Width

170mm

Height

40mm

Brand Mitutoyo
Type depth micrometer
Resolution 0.01mm
Made in Japan
Micrometer head with ratchet thimble
Flat base on micrometer head
Supplied in rigid plastic case
Foam insert with cutouts for components
Includes micrometer body
Includes multiple interchangeable extension rods
Includes small tool stored in foam insert
Graduated thimble scale on micrometer body

Assorted 3M Roloc Grinding Disks

Skylarc Ref J175495

Assorted 3M Roloc Grinding Disks.
Partial box of 3M Part No.76634, 76mm dia, 80 grit disks.
Partial box of 3M Part No. 80513, 76mm dia, P120 grit disks.
Partial box of 3M part No.80512, 51mm dia, P120 grit disks.

PFERD 125mm Polifan Flapdisks, 10x Units

Skylarc Ref A175486

PFERD 125mm Polifan Flapdisks.
Item No.PFR 125-L Z 40 SGP CURVE STEELOX.
New leftover workshop consumables stock.

Internal 50/200 Bore Gauge Set

Skylarc Ref T174803

Length

230mm

Width

125mm

Height

35mm

M Internal 50/200 bore gauge set.
Micrometer head with 0.01 mm graduations.
Interchangeable measuring heads marked 75–100 mm.
Interchangeable measuring heads marked 100–125 mm.
Interchangeable measuring heads marked 125–150 mm.
Interchangeable measuring heads marked 150–175 mm.
Interchangeable measuring heads marked 175–200 mm.
Extension rod included.
Small cylindrical attachment included.
Pair of small flat tools included.
Supplied in fitted hard case with foam insert.

Lot of involute gear cutters assorted DP CP and DP racks

Skylarc Ref M175290

Length

250mm

Width

150mm

Height

60mm

Lot of involute gear cutters.

Assorted Sutton Daco Sandvik End Mills and Cutters

Skylarc Ref G175284

Length

110mm

Width

70mm

Height

50mm

Assorted metal cutting tools.
Includes Sutton Co HSS 5/8 inch short series end mill threaded shank.
Includes Sutton Co HSS 5/8 inch long end mill threaded shank.
Includes Sutton Co HSS 1/8 inch short Unimill threaded shank cutters set of three.
Includes Sutton high speed steel tools as labelled on yellow cases.
Includes Daco 8 percent cobalt high speed steel end mill double end two flute.
Includes Sandvik Coromant cutter marked 695-6206.
Plastic storage cases included for each tool shown.
Exact quantities and any other sizes are as shown in the photos only.

Granite Engineering Table

Skylarc Ref T175661

Length

305mm

Width

305mm

Height

80mm

Granite block

2x Engineers Squares

Skylarc Ref A177124

2x Engineers Squares.
One is branded Groz and measures 347mm long, 183mm wide at weighted base.
Second square is unbranded and measurea 307mm long, 198mm wide at base.

18x Vintage G-Clamps

Skylarc Ref Q177114

18x Vintage G-Clamps.
Sizes from approx 15mm to 200mm.
Vintage Record branded Clamps as well as some Trojan and Fuller branded Clamps.

4x Special T-Slot Nilling Clamps

Skylarc Ref R177089

4x Special T-Slot Nilling Clamps.
Unsure of brand name, see photos.
All are Part No.CP22-1422.
T-slot bar widths are 22mm and 14mm.
Clamp top bar 41mm ling, 13.5mm wide.
Items appear near new and are very clean.

V Block Pair

Skylarc Ref K177576

Each approx 150mm x 65mm x 90mm high

Hafco Industrial Workbench Table

Skylarc Ref M177058

Length

1200mm

Width

750mm

Height

890mm

Hafco Industrial Workbench Table.
Heavy duty steel frame with adjustable feet pads.
40mm thick top board with gren laminate top and rubber edging.
4x holes have been drilled through top, see photos.

Telescopic Guage Set

Skylarc Ref V177561

Length

200mm

Width

160mm

Height

10mm

See photos for sizes

Tap and die set in wooden box

Skylarc Ref X174859

Length

600mm

Width

260mm

Height

60mm

Tap and die set.
Supplied in a rectangular wooden box with hinged lid.
Box has metal latches on the front edge.
Set includes a die stock holder with two handles.
Several round split dies are included.
Multiple smaller round and threaded bushings are included.
There are several small die or chaser holders.
Box contains multiple small cardboard packets marked Dies.
Some packets are marked Stronghold Adjustable Spanner.
Some packets are marked Sutton Die.

66x 380mm Roller Tracks

Skylarc Ref J175027

66x 380mm Roller Tracks.
Aluminium frames with plastic end caps, each frame is 385x40x35mm (excluding end brackets).
Each frame has 35mm diameter, 20mm wide orange plastic rollers.
66x roller units in auction.
Also includes 42x sets of steel track end support brackets, see photos.
See our other listings for more Bulk lots of these rollers.

Assorted small HSS cutters and end mills

Skylarc Ref L175289

Length

250mm

Width

150mm

Height

60mm

Lot of assorted small cutters and end mills.
Includes cutters labelled 1/16" LONG SERIES.
Includes cutters labelled 1/8" LONG SERIES.
Includes cutters labelled 7/32" LONG SERIES.
Includes cutters labelled 3/32" BALL NOSED.
Some cutters labelled HSS-Co8c 3 FLUTE T/AWAY CUTTER 1/16" 3810159 FLAT SHK.
Some cutters labelled HSS-Co8c 3 FL EM T/AWAY CUTTER 3/32" 3800238 FLAT SHK.
Some packaging labelled Clarkson 1/8" SHORT SERIES CUTTER.
Cutters are stored in plastic sleeves and cases.
Quantity of individual cutters is mixed and not counted.
All items shown in the photos are included in this lot.

Samsung Galaxy S10 SM-G973F

Skylarc Ref C175670

Brand: Samsung
Model name: Galaxy S10
Model number: SM-G973F
storage capacity 128GB
8GB memory
USB-C charging and data port
3.5mm audio jack


NO CABLES OR CHARGER

Assorted Ratchet Spanners

Skylarc Ref K175652

See photos for sizes

Hilti P Universal Diamond Cap 125mm, 4x Wheels

Skylarc Ref D175151

Hilti P Universal Diamond Cap wheels.
4x Wheels in auction.
Part No.2238592.
125mm diameter.
22.23mm mounting centre hole.
All four units as new unused.
https://www.hilti.co.nz/c/CLS_POWER_TOOL_INSERT_7126/CLS_DIAMOND_BLADES_CUP_WHEELS/r11403198?activeTab=preconfigured-kits-tabs

EM9 Seties Vector Control Inverter

Skylarc Ref W175118

EM9 Seties Vector Control Inverter.
Model EM9-G1-1d5.
Manufactured by China EM Technology Limited.
1.5kW
Single phase 220V, 50-60Hz.
7A, 0-400Hz output.
Measures 125x95x150mm.
Item is untested.

Moore & Wright No 314 Hardened Straight Edges Set

Skylarc Ref T176077

Length

250mm

Width

50mm

Height

40mm

Brand: Moore & Wright
Sheffield England
Model No 314
Hardened straight edges
Set of five straight edges
Straight edges are metal
Supplied in wooden hinged box
Box marked STR. EDGES on the side
Moore & Wright branding on inside of lid
Each straight edge marked MOORE & WRIGHT SHEFFIELD HARDENED No 314

Tool chest

Skylarc Ref P176047

Length

450mm

Width

240mm

Height

335mm

4 Drawers

Assorted Hand Tools

Skylarc Ref S177116

Assorted Hand Tools.
A mix of tools, most appear to be of older vintage with a few more modetn items mixed in.
Rivet tools, circlip Pliers, wire stripper, small pipe benders, adjustable Wrenches, Wrenches, and more, see photos.

15x Assorted Milling Woodruf Keyseat Cutters

Skylarc Ref Q177088

15x Assorted Milling Woodruf Keyseat Cutters.
Mostly Clarkson branded with a few Dormer units mixed in.
All have 12mm diameter shanks.
See photos for head sizes/types.
All very clean and tidy units.

Taps & Dies etc

Skylarc Ref Q176022

Length

350mm

Width

125mm

Height

50mm

Various items in metal box

16mm Keyless Drill Chuck w/ No.2 Shank

Skylarc Ref F177129

16mm Keyless Drill Chuck.
Unknown manufacturer.
Model B18
No.2 Morse Taper Shank.
Very well maintained tool. Jaws move smoothly.

Assorted Grinding Wheels

Skylarc Ref A175850

Largest Approx 190mm diameter

PA300D Electric Hoist

Skylarc Ref B176033

Length

320mm

Width

140mm

Height

300mm

Model PA300D
Type electric hoist
Lifting capacity 300 kg single line or 150 kg double line
Voltage 230 V 50 Hz
Current 2.4 A
Input power 550 W
Insulating grade B
Protection grade IP54
Group of mechanisms M1
Lifting height 6 m at 300 kg
Lifting height 12 m at 150 kg
Lifting speed 4 m per min at 300 kg
Lifting speed 8 m per min at 150 kg
Duty cycle S3 20 percent 10 min
Rope diameter 3.0 mm
Rope breaking force greater than 750 kg
Wired pendant control with emergency stop button

LIFTING STROP USED TO HANG IN PHOTOS NOT INCLUDED

ELECTRIC MOTOR USED IN DEMONSTRATION VIDEO NOT INCLUDED

Machinist screw vice J O Miller 1983

Skylarc Ref A174784

Length

200mm

Width

100mm

Height

50mm

Machinist screw vice.
Marked MAKER J O MILLER 1983.
Leadscrew with fixed handle.
Four cap screws on fixed jaw block.
Four cap screws on moving jaw block.
Overall length approximately 210mm based on tape measure.
Jaw width approximately 70mm based on tape measure.
Steel construction.

2x Eclipse No.212 Vee Blocks

Skylarc Ref G177104

2x Eclipse No.212 Vee Blocks.
Each is 100x75x40mm.
Both appear as new unused.

Workshop Grinding Belts , 52x Units

Skylarc Ref N175109

Workshop Grinding Belts.
52x total Units in auction.
All are 40mm wide and approx 760mm long.
32x Deerfos PS330 Belts, grit 60.
10x Deerfos PS330 Belts, grit 40.
14x Belts of a thicker material in various grits.
As new unused stock.

2x Eclipse No.706 Vee Blocks w/ 2x Clamps

Skylarc Ref D177101

2x vintage Eclipse No.706 Vee Blocks w/ 2x Clamps.
Made in England by James Neil & Co.
Each block is 51x38x38mm.
Includes 2x bock Clamps.
Items are very clean and dry.

Involute Gear Cutter set 14DP

Skylarc Ref E177076

Involute Gear Cutter set 14DP.
Includes set number 1 (2x units) and numbers 2 through 7.
25mm inner bore.
See photos for details on markings on each cutter.
Cutter appear near new with little to no visible signs of prior usage. Some light protective oil residue on some units.

Bauer BK06-34H/D07LA4/SP Gear Motor

Skylarc Ref M175628

Length

400mm

Width

180mm

Height

160mm

Manufacturer Bauer.
Type BK06-34H/D07LA4/SP.
3 phase gear motor.
Motor number 26234952-9.
Order number 26234952.
Rated power 0.37 kW.
Rated voltage 230/400 V.
Rated current 2.35/1.35 A.
Frequency 50 Hz.
Connection delta or star.
Ingress protection rating IP66.
Duty type S1.
Insulation class F.
Power factor cos phi 0.66.
Motor speed 1350 r/min.
Gear output speed 75 r/min.
Rated torque 42 Nm.
Gearbox marking BK06-01 A1.
Ambient temperature range -10 to 50 degrees Celsius.
Mass 14.8 kg.
370mm long.
Gearbox mounting flange diameter 80mm inner, 120mm outer.
Unsure if this was ever used. Exterior marks and dust from storage.

Sidchrome 23 Piece Metric and A/F Socket Set 12110

Skylarc Ref M175862

Length

240mm

Width

80mm

Height

45mm

Brand Sidchrome
23 Piece Metric and A/F Socket Set
Model number 12110
Includes ratchet marked 12905
Includes flex handle 145 mm
Includes extension bar 150 mm
Includes extension bar 50 mm
Metal case with latch

Involute Gear Cutter set 24DP

Skylarc Ref H177079

Involute Gear Cutter set 24DP.
Includes set No.1 through No.8.
25mm inner bore.
See photos for details on markings on each cutter.
Cutter appear near new with little to no visible signs of prior usage. Some light protective oil residue on some units.

PFERD 180mm Cut Off Disks, 30x Units

Skylarc Ref T175141

PFERD 180mm Cut Off Disks.
30x disks in auction.
All are type EH 180-2.5 SG Steel + Inox.
180 x 2.5 x 22.23mm
Expiry 07/2023.
As new unused but expired stock.

Clarkson Hiflow Series 52 6 inch Dia Cutter Head

Skylarc Ref V176053

Manufacturer marking Clarkson England
Model marking Hiflow Series 52
Marked diameter 6 in Dia
Cutting head with multiple replaceable inserts
Central threaded mounting hole
Four countersunk mounting screw holes on rear face
Supplied in a metal storage case

2x Vee Blocks, New

Skylarc Ref F177103

2x Vee Blocks.
Unknown manufacturer.
Both are 226x79x51mm.
Both are as new showing no signs of prior usage.

Involute Gear Cutter set 12DP

Skylarc Ref I177080

Involute Gear Cutter set 12DP.
Includes set No.1 through 8.
25mm inner bore.
See photos for details on markings on each cutter.
Cutter appear near new with little to no visible signs of prior usage. Very clean Cutters.

Workshop Workbench w/ Shelving Wall