**MASSIVE NEW FACTORY LIQUIDATION**
Stainless Tanks, Processing Machinery, Pumps, Blast Freezer, Refrigeration Equipment
AND MUCH MORE
Over 5 Million Dollars worth of near new equipment must be sold!
ALL $1 START = RESERVE
Skylarc Ref M201000
New stainless steel tank
Flat bottomed
Multiple inlet and
Double insulated with water intakes for outer layer
Lifting points
A few minor transport dents
On transport frame
Skylarc Ref N201001
New stainless steel tank
Flat bottomed
Multiple inlet and
Double insulated with water intakes for outer layer
Lifting points
A few minor transport dents
On transport frame
Skylarc Ref O201002
New stainless steel tank
Flat bottomed
Multiple inlet and
Double insulated with water intakes for outer layer
Lifting points
A few minor transport dents
On transport frame
Skylarc Ref A201014
Model: Heng Gan WLDH-1500 Horizonal Screw Mixer
15kW main motor
600kg - 900kg mixing capacity
33rpm spindle speed
Three phase 32 amp 5 pin plug
Skylarc Ref Z201013
Approx 9000 litres
Double insulated
IMF level sensor
Includes gate 4" valve
Mounted on 4 legs
Access port in top
Will be disconnect for collection
Skylarc Ref Y201012
30,000 litre plastic tank
Stainless pipe out top outlet
Valves on bottom outlets
IFM level sensor
Will be disconnected for collection
Skylarc Ref R166372
Manufacturer Chicago Pneumatic
Model CPM10 DX M 200L
Year 2016
Integrated air receiver marked AIR COM Italy NN200Z V200L
Rated working pressure 8 bar
Rated max pressure 8 bar
Refrigerant type R134A
Nameplate weight 254 kg
Compressor supply 400 V 50 Hz 3 phase 7.5 kW
Dryer supply 230 V 50 Hz 1 phase 0.475 kW
Maximum inlet temperature 40 C
Maximum ambient temperature 40 C
Receiver temperature range Tmin -10 C Tmax 100 C
Hour meter reading 26737.6 hours
Electrical plug rated 32A 500V 50Hz IP66 model 56PA532
Skylarc Ref D201017
AERMEC ANL202°Q°V° air cooled condenser.
Manufactured in Italy.
Model: ANL202°Q°V°°°
Serial Number: 181200522250001
Year: 2018
Refrigerant: R410A
Electrical: 3N~400V 50 Hz
IP Rating: X4
Operating Temperature Range: -10 to 120°C (HP/LP)
Design Pressures: 42/25 bar (HP/LP)
GWP: 2088
CO2 equivalent: 12.32 tonnes
Power Consumption: 43.70 kW (cooling)
Electrical Input: 27.50 A
Two axial fans with black metal guards.
Perforated metal mesh front panel.
White painted steel cabinet construction.
Air intake and water discharge connections.
Contains fluorinated greenhouse gases.
Regulation (EU) No 517/2014 compliant.
CE marked.
EUROM certified performance.
Skylarc Ref P201003
6400mm x 2400mm welded rebar frames
Approx 8mm bar
30 total
Skylarc Ref W201010
Bailey plastic water tank
5000 litre capacity
Skylarc Ref X201011
Bailey plastic water tank
5000 litre capacity
Skylarc Ref B201015
Model: Shanghai Huaxing YDXF-200 Hydraulic Hoist
Max lift height 3326mm
1.5 m/min lift speed
200kg capacity
3 phase 32 amp 5 pin plug
Skylarc Ref S201006
4270mm wide
4250mm tall uprights
No controls or mounting hardware
Skylarc Ref T201007
4270mm wide
3250mm tall uprights
No controls or mounting hardware
Skylarc Ref U201008
4270mm wide
3250mm tall uprights
No controls or mounting hardware
Skylarc Ref V201009
Assorted lengths of 150mm x 150mm H beam
Lengths from 1100mm - 2100mm
Assorted galvanized tread plate sheet up to 1120mm x 2200mm
Assorted bracing sections
Skylarc Ref X166352
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref N201651
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref M201650
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref L201649
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref K201648
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref J201647
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref I201646
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref G201644
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref H201645
Brand: Hyperlift
Model: HL65-HSD
Type: Industrial highspeed door operator
Rated voltage and frequency: 220-240V 50Hz
Rated input power: 1.1kW
Torque: 65Nm
Speed range: 30-250RPM
Frequency converter: Yes
Diameter hollow shaft: 30mm
Maximum cycles per hour: 60
Emergency release: Crank
Limit setting of door travel: Digital encoder
Force of mechanical brake: 8Nm
Controller with LCD display included
Controller has up and down control buttons
Controller has stop button
Controller has main isolator switch
Blue three-pin power plug attached to cable
Skylarc Ref B200911
Manufacturer Shanghai QiFan Cable Co Ltd
Product model RVV
Cable type RVV flexible electrical cable
Conductor count 7 cores
Conductor cross section 1.5mm² per core.
Nominal cross sectional area 7x1.5mm².
Rated voltage 300/500V.
Cable length 630m.
Segment length range 0 to 630m.
Executive standard JB/T8734.3-2016.
Manufacturing date 2021-12-01.
Outer sheath colour black.
Copper conductors visible in core cross section.
Marking on sheath indicates Shanghai QiFan Cable Co Ltd.
Skylarc Ref U201658
Brand: Hyperlift
Model: HL30-HSD
Type: Industrial high speed door operator
Rated voltage: 220-240V
Rated frequency: 50Hz
Rated input power: 0.8kW
Rated output torque: 25Nm
Maximum output torque: 30Nm
Output speed range: 30-250RPM
Shaft diameter: 30mm
Maximum cycles per hour: 60
Cos phi: 0.66
Ambient temperature range: -20°C to +55°C
Mechanical brake force: 8Nm
Frequency converter: Yes
Emergency release: Crank
Limit setting of door travel: Digital encoder
Control panel with LCD display and push buttons
Red emergency stop button on control panel
Packaged in original carton
Skylarc Ref T201657
Brand: Hyperlift
Model: HL30-HSD
Type: Industrial high speed door operator
Rated voltage: 220-240V
Rated frequency: 50Hz
Rated input power: 0.8kW
Rated output torque: 25Nm
Maximum output torque: 30Nm
Output speed range: 30-250RPM
Shaft diameter: 30mm
Maximum cycles per hour: 60
Cos phi: 0.66
Ambient temperature range: -20°C to +55°C
Mechanical brake force: 8Nm
Frequency converter: Yes
Emergency release: Crank
Limit setting of door travel: Digital encoder
Control panel with LCD display and push buttons
Red emergency stop button on control panel
Packaged in original carton
Skylarc Ref S201656
Brand: Hyperlift
Model: HL30-HSD
Type: Industrial high speed door operator
Rated voltage: 220-240V
Rated frequency: 50Hz
Rated input power: 0.8kW
Rated output torque: 25Nm
Maximum output torque: 30Nm
Output speed range: 30-250RPM
Shaft diameter: 30mm
Maximum cycles per hour: 60
Cos phi: 0.66
Ambient temperature range: -20°C to +55°C
Mechanical brake force: 8Nm
Frequency converter: Yes
Emergency release: Crank
Limit setting of door travel: Digital encoder
Control panel with LCD display and push buttons
Red emergency stop button on control panel
Packaged in original carton
Skylarc Ref R201655
Brand: Hyperlift
Model: HL30-HSD
Type: Industrial high speed door operator
Rated voltage: 220-240V
Rated frequency: 50Hz
Rated input power: 0.8kW
Rated output torque: 25Nm
Maximum output torque: 30Nm
Output speed range: 30-250RPM
Shaft diameter: 30mm
Maximum cycles per hour: 60
Cos phi: 0.66
Ambient temperature range: -20°C to +55°C
Mechanical brake force: 8Nm
Frequency converter: Yes
Emergency release: Crank
Limit setting of door travel: Digital encoder
Control panel with LCD display and push buttons
Red emergency stop button on control panel
Packaged in original carton
Skylarc Ref Q201654
Brand: Hyperlift
Model: HL30-HSD
Type: Industrial high speed door operator
Rated voltage: 220-240V
Rated frequency: 50Hz
Rated input power: 0.8kW
Rated output torque: 25Nm
Maximum output torque: 30Nm
Output speed range: 30-250RPM
Shaft diameter: 30mm
Maximum cycles per hour: 60
Cos phi: 0.66
Ambient temperature range: -20°C to +55°C
Mechanical brake force: 8Nm
Frequency converter: Yes
Emergency release: Crank
Limit setting of door travel: Digital encoder
Control panel with LCD display and push buttons
Red emergency stop button on control panel
Packaged in original carton
Skylarc Ref P201653
Brand: Hyperlift
Model: HL30-HSD
Type: Industrial high speed door operator
Rated voltage: 220-240V
Rated frequency: 50Hz
Rated input power: 0.8kW
Rated output torque: 25Nm
Maximum output torque: 30Nm
Output speed range: 30-250RPM
Shaft diameter: 30mm
Maximum cycles per hour: 60
Cos phi: 0.66
Ambient temperature range: -20°C to +55°C
Mechanical brake force: 8Nm
Frequency converter: Yes
Emergency release: Crank
Limit setting of door travel: Digital encoder
Control panel with LCD display and push buttons
Red emergency stop button on control panel
Packaged in original carton
Skylarc Ref O201652
Brand: Hyperlift
Model: HL30-HSD
Type: Industrial high speed door operator
Rated voltage: 220-240V
Rated frequency: 50Hz
Rated input power: 0.8kW
Rated output torque: 25Nm
Maximum output torque: 30Nm
Output speed range: 30-250RPM
Shaft diameter: 30mm
Maximum cycles per hour: 60
Cos phi: 0.66
Ambient temperature range: -20°C to +55°C
Mechanical brake force: 8Nm
Frequency converter: Yes
Emergency release: Crank
Limit setting of door travel: Digital encoder
Control panel with LCD display and push buttons
Red emergency stop button on control panel
Packaged in original carton
Skylarc Ref S166399
Brand: Expro Meat Tech
Model: BXXQ-III
Type: Boots washer
Power rating: 1.1 kW
Electrical supply: 400V 50Hz
Water inlet: DN15
Brush speed: 56 rpm
Washer volume: 5 L
Stated weight: 297 kg
CEE plug rating: 16A 6h 220-380V or 240-415V
CEE plug type: 2152 IP67 weather proof connector conforming to IEC309-2
Stainless steel body with integrated railings
Multiple blue rotary brushes fitted in base channels
Control box with emergency stop button mounted on rail
Skylarc Ref J200893
Brand: LAPAR
Item: LPA11-1D3A6C#C1-65-1.6
Type: LAPAR control valve with actuator
Nominal size DN65
Size 65
Pressure rating PN16
Rating 16 bar
Body marking CF8
Material: CF8-F304-PCTFE
Marked 304/PCTFE on valve body
Flanged ends
Temperature range +125°C to -196°C
Actuator drive model LTDA125
Actuator operating pressure 5 to 7 bar.
Medium WOG as per tag.
Serial number 40476.
Tag number LPJS20210729R1.
Manufacture date 2021.09.
CE and TS marked on actuator label.
ATEX 94/9/EC marking on actuator label.
Label text supervised by ITALY LAPA.
Includes LAPAR qualification certificate card.
185mm outer flange diameter.
Stainless steel construction.
Item is new unused. See our other listings for more of these new units.
Skylarc Ref K200894
Brand: LAPAR
Item: LPA11-1D3A6C#C1-65-1.6
Type: LAPAR control valve with actuator
Nominal size DN65
Size 65
Pressure rating PN16
Rating 16 bar
Body marking CF8
Material: CF8-F304-PCTFE
Marked 304/PCTFE on valve body
Flanged ends
Temperature range +125°C to -196°C
Actuator drive model LTDA125
Actuator operating pressure 5 to 7 bar.
Medium WOG as per tag.
No. 40476.
Tag number LPJS20210729R1.
Manufacture date 2021.09.
CE and TS marked on actuator label.
ATEX 94/9/EC marking on actuator label.
Label text supervised by ITALY LAPA.
Includes LAPAR qualification certificate card.
185mm outer flange diameter.
Stainless steel construction.
Item is new unused. See our other listings for more of these new units.
Photos of unwrapped unit are indicative.
Skylarc Ref L200895
Brand: LAPAR
Item: LPA11-1D3A6C#C1-65-1.6
Type: LAPAR control valve with actuator
Nominal size DN65
Size 65
Pressure rating PN16
Rating 16 bar
Body marking CF8
Material: CF8-F304-PCTFE
Marked 304/PCTFE on valve body
Flanged ends
Temperature range +125°C to -196°C
Actuator drive model LTDA125
Actuator operating pressure 5 to 7 bar.
Medium WOG as per tag.
No. 40476.
Tag number LPJS20210729R1.
Manufacture date 2021.09.
CE and TS marked on actuator label.
ATEX 94/9/EC marking on actuator label.
Label text supervised by ITALY LAPA.
Includes LAPAR qualification certificate card.
185mm outer flange diameter.
Stainless steel construction.
Item is new unused. See our other listings for more of these new units.
Photos of unwrapped unit are indicative.
Skylarc Ref M200896
Brand: LAPAR
Item: LPA11-1D3A6C#C1-65-1.6
Type: LAPAR control valve with actuator
Nominal size DN65
Size 65
Pressure rating PN16
Rating 16 bar
Body marking CF8
Material: CF8-F304-PCTFE
Marked 304/PCTFE on valve body
Flanged ends
Temperature range +125°C to -196°C
Actuator drive model LTDA125
Actuator operating pressure 5 to 7 bar.
Medium WOG as per tag.
No. 40476.
Tag number LPJS20210729R1.
Manufacture date 2021.09.
CE and TS marked on actuator label.
ATEX 94/9/EC marking on actuator label.
Label text supervised by ITALY LAPA.
Includes LAPAR qualification certificate card.
185mm outer flange diameter.
Stainless steel construction.
Item is new unused. See our other listings for more of these new units.
Photos of unwrapped unit are indicative.
Skylarc Ref N200897
Brand: LAPAR
Item: LPA11-1D3A6C#C1-65-1.6
Type: LAPAR control valve with actuator
Nominal size DN65
Size 65
Pressure rating PN16
Rating 16 bar
Body marking CF8
Material: CF8-F304-PCTFE
Marked 304/PCTFE on valve body
Flanged ends
Temperature range +125°C to -196°C
Actuator drive model LTDA125
Actuator operating pressure 5 to 7 bar.
Medium WOG as per tag.
No. 40476.
Tag number LPJS20210729R1.
Manufacture date 2021.09.
CE and TS marked on actuator label.
ATEX 94/9/EC marking on actuator label.
Label text supervised by ITALY LAPA.
Includes LAPAR qualification certificate card.
185mm outer flange diameter.
Stainless steel construction.
Item is new unused. See our other listings for more of these new units.
Photos of unwrapped unit are indicative.
Skylarc Ref O200898
Brand: LAPAR
Item: LPA11-1D3A6C#C1-65-1.6
Type: LAPAR control valve with actuator
Nominal size DN65
Size 65
Pressure rating PN16
Rating 16 bar
Body marking CF8
Material: CF8-F304-PCTFE
Marked 304/PCTFE on valve body
Flanged ends
Temperature range +125°C to -196°C
Actuator drive model LTDA125
Actuator operating pressure 5 to 7 bar.
Medium WOG as per tag.
No. 40476.
Tag number LPJS20210729R1.
Manufacture date 2021.09.
CE and TS marked on actuator label.
ATEX 94/9/EC marking on actuator label.
Label text supervised by ITALY LAPA.
Includes LAPAR qualification certificate card.
185mm outer flange diameter.
Stainless steel construction.
Item is new unused. See our other listings for more of these new units.
Photos of unwrapped unit are indicative.
Skylarc Ref P200899
Brand LAPAR
Model LPA11-1D3A6C#C1-80-1.6
Type pneumatic ball valve
Material CF8-F304-PCTFE
Nominal size DN80
Flanged ends 200mm dismeter.
Pressure rating 16 bar
Operating medium WOG
Drive unit model LTDA145
Drive supply pressure 5.5 to 7 bar.
Temperature range plus125°C to minus196°C.
Tag shows manufacture date 2021.09.
Body marking DN80 10 to 16 CF8.
Number 40477.
Certification markings CE and TS on actuator label.
ATEX marking II 2GD c T95°C on actuator label.
304 grade stainless steel.
See our other listings for more of these units.
New unused item.
Skylarc Ref Q200900
Brand LAPAR
Model LPA11-1D3A6C#C1-80-1.6
Type pneumatic ball valve
Material CF8-F304-PCTFE
Nominal size DN80
Flanged ends 200mm dismeter.
Pressure rating 16 bar
Operating medium WOG
Drive unit model LTDA145
Drive supply pressure 5.5 to 7 bar.
Temperature range plus125°C to minus196°C.
Tag shows manufacture date 2021.09.
Body marking DN80 10 to 16 CF8.
Number 40477.
Certification markings CE and TS on actuator label.
ATEX marking II 2GD c T95°C on actuator label.
304 grade stainless steel.
See our other listings for more of these units.
New unused item.
Photos of unwrapped unit are indicative.
Skylarc Ref R200901
Brand LAPAR
Model LPA11-1D3A6C#C1-80-1.6
Type pneumatic ball valve
Material CF8-F304-PCTFE
Nominal size DN80
Flanged ends 200mm dismeter.
Pressure rating 16 bar
Operating medium WOG
Drive unit model LTDA145
Drive supply pressure 5.5 to 7 bar.
Temperature range plus125°C to minus196°C.
Tag shows manufacture date 2021.09.
Body marking DN80 10 to 16 CF8.
Number 40477.
Certification markings CE and TS on actuator label.
ATEX marking II 2GD c T95°C on actuator label.
304 grade stainless steel.
See our other listings for more of these units.
New unused item.
Photos of unwrapped unit are indicative.
Skylarc Ref N166394
Brand Simpro
Manual hand pallet jack
Rated load capacity 2500kg
Two fork design
Red painted steel forks
Black handle
Skylarc Ref M166393
Brand Arrow
Manual hand pallet jack
Rated load capacity 2500kg
Two fork design
Skylarc Ref T200877
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref U200878
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref V200879
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref W200880
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref X200881
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref Y200882
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref Z200883
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref A200884
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref B200885
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5351.
DN50 Flsnge
PN16 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x110x270mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref C200886
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5221.
DN65 Flange, 180mm outer diameter.
CLASS 150 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x180x365mm.
See our other listings for more of these new units.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref E200888
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5221.
DN65 Flange, 180mm outer diameter.
CLASS 150 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x180x365mm.
See our other listings for more of these new units.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref F200889
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5221.
DN65 Flange, 180mm outer diameter.
CLASS 150 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x180x365mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref G200890
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5221.
DN65 Flange, 180mm outer diameter.
CLASS 150 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x180x365mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref H200891
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5221.
DN65 Flange, 180mm outer diameter.
CLASS 150 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x180x365mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref I200892
V-Tork Double Acting Pneumatic Actuator with Duria Control Valve.
V-Tork Actuator model No. VT095DN
8 Bar Max pressure.
128.5 Nm torque at 5.5 bar.
G 1/4" Pressure connection.
F05/F07 ENISO 5211/Square.
Duria Control Valve model No.DF-5221.
DN65 Flange, 180mm outer diameter.
CLASS 150 rating.
304 stainless steel construction.
17-4PH stem.
PTFE seat.
ISO9001.
Both units are new never installed.
Combined overall dimensions are approx 260x180x365mm.
See our other listings for more of these new units.
Photos are indicative.
https://valveactuators.co.uk/product/v-tork-vt095s09-double-acting-pneumatic-actuator/
Skylarc Ref S200902
Lapar Pneumatic Control Actuator w/ Ball Valve.
Brand: Lapar
Item: LPA11-1D3A6C#C1-50-1.6
Type: LPA11-1D3A6C#C1-50-1.6
Pneumatic actuator with flanged ball valve
Valve size: DN50
165mm diameter flanges.
Rating: 16
Body marking: DN50 10-40 CF8
Material: CF8-F304-PCTFE
Temperature range: +125°C to -196°C
Drive: LTDA125 5-7 bar
Medium: WOG
Number: 40475
Manufacture date: 202109.
ATEX 94/9/EC II 2GD c T95°C.
Label marking: TS 271095X-2024.
304 grade stainless steel.
Overall dimensions 330x165x420mm.
New unused unit.
See our other listings for more of these units.
Skylarc Ref T200903
Lapar Pneumatic Control Actuator w/ Ball Valve.
Brand: Lapar
Item: LPA11-1D3A6C#C1-50-1.6
Type: LPA11-1D3A6C#C1-50-1.6
Pneumatic actuator with flanged ball valve
Valve size: DN50
165mm diameter flanges.
Rating: 16
Body marking: DN50 10-40 CF8
Material: CF8-F304-PCTFE
Temperature range: +125°C to -196°C
Drive: LTDA125 5-7 bar
Medium: WOG
Number: 40475
Manufacture date: 202109.
ATEX 94/9/EC II 2GD c T95°C.
Label marking: TS 271095X-2024.
304 grade stainless steel.
Overall dimensions 330x165x420mm.
New unused unit.
See our other listings for more of these units.
Photos of unwrapped item are indicative.
Skylarc Ref U200904
Lapar Pneumatic Control Actuator w/ Ball Valve.
Brand: Lapar
Item: LPA11-1D3A6C#C1-50-1.6
Type: LPA11-1D3A6C#C1-50-1.6
Pneumatic actuator with flanged ball valve
Valve size: DN50
165mm diameter flanges.
Rating: 16
Body marking: DN50 10-40 CF8
Material: CF8-F304-PCTFE
Temperature range: +125°C to -196°C
Drive: LTDA125 5-7 bar
Medium: WOG
Number: 40475
Manufacture date: 202109.
ATEX 94/9/EC II 2GD c T95°C.
Label marking: TS 271095X-2024.
304 grade stainless steel.
Overall dimensions 330x165x420mm.
New unused unit.
See our other listings for more of these units.
Photos of unwrapped item are indicative.
Skylarc Ref V200905
Lapar Pneumatic Control Actuator w/ Ball Valve.
Brand: Lapar
Item: LPA11-1D3A6C#C1-50-1.6
Type: LPA11-1D3A6C#C1-50-1.6
Pneumatic actuator with flanged ball valve
Valve size: DN50
165mm diameter flanges.
Rating: 16
Body marking: DN50 10-40 CF8
Material: CF8-F304-PCTFE
Temperature range: +125°C to -196°C
Drive: LTDA125 5-7 bar
Medium: WOG
Number: 40475
Manufacture date: 202109.
ATEX 94/9/EC II 2GD c T95°C.
Label marking: TS 271095X-2024.
304 grade stainless steel.
Overall dimensions 330x165x420mm.
New unused unit.
See our other listings for more of these units.
Photos of unwrapped item are indicative.
Skylarc Ref W200906
Lapar Pneumatic Control Actuator w/ Ball Valve.
Brand: Lapar
Item: LPA11-1D3A6C#C1-50-1.6
Type: LPA11-1D3A6C#C1-50-1.6
Pneumatic actuator with flanged ball valve
Valve size: DN50
165mm diameter flanges.
Rating: 16
Body marking: DN50 10-40 CF8
Material: CF8-F304-PCTFE
Temperature range: +125°C to -196°C
Drive: LTDA125 5-7 bar
Medium: WOG
Number: 40475
Manufacture date: 202109.
ATEX 94/9/EC II 2GD c T95°C.
Label marking: TS 271095X-2024.
304 grade stainless steel.
Overall dimensions 330x165x420mm.
New unused unit.
See our other listings for more of these units.
Photos of unwrapped item are indicative.
Skylarc Ref X200907
Lapar Pneumatic Control Actuator w/ Ball Valve.
Brand: Lapar
Item: LPA11-1D3A6C#C1-50-1.6
Type: LPA11-1D3A6C#C1-50-1.6
Pneumatic actuator with flanged ball valve
Valve size: DN50
165mm diameter flanges.
Rating: 16
Body marking: DN50 10-40 CF8
Material: CF8-F304-PCTFE
Temperature range: +125°C to -196°C
Drive: LTDA125 5-7 bar
Medium: WOG
Number: 40475
Manufacture date: 202109.
ATEX 94/9/EC II 2GD c T95°C.
Label marking: TS 271095X-2024.
304 grade stainless steel.
Overall dimensions 330x165x420mm.
New unused unit.
See our other listings for more of these units.
Photos of unwrapped item are indicative.
Skylarc Ref M174978
Brand: Westinghouse
Model: WSF6602WA
Type: Freestanding dishwasher
Colour: White
Maximum power consumption: 1900W
Energy rating label: 3 stars
Annual energy consumption on label: 295 kWh per year
Water rating label: 3.5 stars
Water use on label: 11.8 litres per wash
Skylarc Ref T166400
Stainless steel wash trough.
Stainless steel splashback panel.
Two chrome tap outlets mounted on splashback.
Central mounted soap dispenser on splashback.
Single large rectangular basin with centre waste outlet and strainer.
Front stainless steel shelf or gutter running full width of trough.
Pedal style control bar mounted at front underside of basin.
Freestanding stainless steel frame with four legs.
Skylarc Ref R166398
Brand: Brayco Stainless Steel Sinks Christchurch
Stainless steel double bowl sink bench
Two rectangular sink bowls
Integrated stainless steel bench top
Integrated rear upstand splashback
Stainless steel tubular frame and legs
Single mixer tap fitted above left bowl
Tap connected to flexible braided hose under bench
Two plastic sink waste fittings under bowls
Open undershelf support rails
Front left leg fitted with adjustable foot
Skylarc Ref E166385
Manufacturer Millennium Mechatronics Ltd
Floor scale model MF1212-1500M
Indicator model MI101
Accuracy class III
Maximum capacity 1500kg
Minimum capacity 10kg
Verification interval e=500g
Tare capacity 1500kg
Indicator supply rating 12V 500mA
Operating temperature range -10°C to 40°C
Large digital kg display
Indicator has G N PRINT M+ MR TARE ZERO and ON OFF keys
Plate has checker tread surface
Indicator mounted on floor stand
Powered on and displaying weight in photos
No power cable for display
Skylarc Ref W201660
Stainless steel wash trough.
Stainless steel splashback panel.
Two chrome tap outlets mounted on splashback.
Central mounted soap dispenser on splashback.
Single large rectangular basin with centre waste .
Front stainless steel shelf or gutter running full width of trough.
Pedal style control bar mounted at front underside of basin.
Freestanding stainless steel frame with four legs.
Never previously been installed
Skylarc Ref S166373
Manufacturer The A.E.W. Engineering Co. Ltd.
Machine model 350M.
Machine type MK.7.
Serial number S129282.
Rated voltage 415 V.
Rated current 3.4 A.
Phase 3.
Bandsaw configuration with vertical blade.
Metal construction frame and table.
Fitted with movable work table section.
Machine is mounted on a fixed metal stand.
Large drive wheel visible inside upper guard.
Guarded lower drive section with metal cover.
Control box mounted on front right side of stand.
Plug rating 32 amp.
Plug voltage rating 500 V.
Skylarc Ref P174981
Stainless steel bench.
Rectangular stainless steel worktop.
Four cylindrical metal legs.
Single lower metal shelf.
Adjustable feet on legs.
Reinforcing rails under the top surface.
Skylarc Ref G166387
Brand: Expro Meat Tech
Model: BGXQ-15
Type: Boots dryer
Supply: 230V 50Hz
Power: 2.12kW
Capacity: 15 pairs per cycle
Weight: 81kg
Dimensions: 880 x 680 x 1900mm
Unit has multiple horizontal drying arms
Control panel includes power and function buttons
Fitted with CEE weatherproof connector typ 2132 IP67
Skylarc Ref F166386
Brand: Expro Meat Tech
Model: BGXQ-15
Type: Boots dryer
Supply: 230V 50Hz
Power: 2.12kW
Capacity: 15 pairs per cycle
Weight: 81kg
Dimensions: 880 x 680 x 1900mm
Unit has multiple horizontal drying arms
Control panel includes power and function buttons
Fitted with CEE weatherproof connector typ 2132 IP67
Skylarc Ref R174983
Brand: TCL
Model: 58P635
Display size: 58 inch screen
Operating system: Google TV
TV is wall mounted on an articulated wall bracket
No stand
Skylarc Ref O174980
Brand: Acqua
Model: GY-NE242RF
Appliance type: refrigerator
Capacity: 242L
Energy consumption: 0.479kWh per 24h
Net weight: 38kg
Color: white exterior
Single door design
Interior light
Mechanical thermostat control
Four glass shelves inside cabinet
Skylarc Ref J166390
Brand: Brayco.
Stainless steel bench top.
Rectangular bench shape.
Four stainless steel legs.
Galvanised steel undershelf.
Adjustable feet on each leg.
Bench top has underside reinforcing channels.
Metal collar fittings attach legs to undershelf.
Skylarc Ref H166388
Brand: Easy Access
Model: Warthog Welded Ladder
Code: WHPL 06
Material: aluminium
Ladder length: 2.865 m
Maximum working height: 1.8 m
Maximum load rating: 180 kg
Industrial rating as per label
Type: platform safety ladder
Integrated aluminium platform
Platform located near top of ladder
Step ladder configuration
Both sides equipped with treads
Four swivelling caster wheels
Spring-loaded castor mechanisms on legs
Yellow foot caps on ladder legs
Skylarc Ref B166382
QI ZHI electric motor model YBX3-100L-6.
Motor rated power 1.5 kW.
Motor rated voltage 415 V.
Motor rated current 4.3 A.
Motor rated speed 930 r/min.
Motor rated frequency 50 Hz.
Motor protection class IP55.
Motor duty type S1.
Motor nameplate indicates Ex marking.
Motor efficiency 82.5 percent.
Pump model 6G25-1 as per pump nameplate.
Pump rated flow 2 cubic metres per hour as per pump nameplate.
Pump rated speed 980 r/min as per pump nameplate.
Pump power 1.5 kW as per pump nameplate.
Pump nameplate date 2022-11.
Assembly mounted on stainless steel base frame.
Skylarc Ref O166395
Brand: ToolPRO
Power rating: 6.5HP
Maximum pressure: 2900PSI
Fuel type: petrol
Recoil start engine
Frame mounted on two wheels
Metal frame with push handle
Rubber tyres on plastic wheels
Quick connect fittings on pump outlet
Skylarc Ref L166392
Side handles
Swivel casters
Slight damage to lip and lid
Skylarc Ref K166391
Side handles
Swivel casters
Skylarc Ref C166383
Stainless steel pedestal hand wash basin.
Single bowl with integrated splashback panel.
Wall mounted tap with push button control.
Pedal operated control on front of pedestal.
Integrated liquid soap dispenser on basin rim.
Flexible braided water inlet hoses included.
Flexible corrugated waste hose included.
Rear access panel for plumbing connections.
Pedestal base has four mounting holes.
Free standing floor mounted design.
Skylarc Ref Z166380
Trays approx 1005mm x 520mm
Trays vary
Some dents etc
Skylarc Ref Y166379
Trays approx 1005mm x 520mm
Trays vary
Some dents etc
25 Slots & trays - full
Skylarc Ref Y201662
Trays approx 1005mm x 520mm
Trays vary
Some dents and bent trays etc
25 Slots & trays - full
Skylarc Ref X201661
Trays approx 1005mm x 520mm
Trays vary
Some dents and bent trays etc
25 Slots & trays - full
Skylarc Ref V201659
Trays approx 1005mm x 520mm
Trays vary
Some dents and bent trays etc
25 Slots & trays - full
Skylarc Ref X166378
Stainless steel pedestal hand wash basin.
Single bowl with integrated splashback panel.
Wall mounted tap with push button control.
Pedal operated control on front of pedestal.
Integrated liquid soap dispenser on basin rim.
Flexible braided water inlet hoses included.
Flexible corrugated waste hose included.
Rear access panel for plumbing connections.
Pedestal base has four mounting holes.
Free standing floor mounted design.
Skylarc Ref V166376
Side handles
Swivel casters
Slight damage to lip and lid
Skylarc Ref W166377
Side handles
Swivel casters
Slight damage to lip and lid
Skylarc Ref R201005
GRAF infiltration and attenuation system
Model: VE13
205 litres capacity
Approx 150 units
Skylarc Ref U166375
Side handles
Swivel casters
Slight damage to lip and lid
Skylarc Ref T166374
Side handles
Swivel casters
Slight damage to lip and lid
Skylarc Ref Y200908
Stainless Steel Low Platform Trolley Frame.
40x20mm box and 30mm diameter tube stainless steel construction.
Low frame for adding a board or hauling baskets.
Low frame area is 800x825mm and 150mm above floor.
100mm diameter castor wheels, two are locking swivel type.
Includes 10x 820x400x75mm white plastic trays for drying fruit, nuts, or similar products.
See our other listings for more of these stainless Trollies with trays.
Skylarc Ref Z200909
Stainless Steel Low Platform Trolley Frame.
40x20mm box and 30mm diameter tube stainless steel construction.
Low frame for adding a board or hauling baskets.
Low frame area is 800x825mm and 150mm above floor.
Includes 10x 820x400x75mm white plastic trays for drying fruit, nuts, or similar products.
Photos of unwrapped trays are indicative.
100mm diameter castor wheels, two are locking swivel type.
See our other listings for more of these stainless Trollies.
Skylarc Ref A200910
Stainless Steel Low Platform Trolley Frame.
40x20mm box and 30mm diameter tube stainless steel construction.
Low frame for adding a board or hauling baskets.
Low frame area is 800x825mm and 150mm above floor.
Includes 10x 820x400x75mm white plastic trays for drying fruit, nuts, or similar products.
Photos of unwrapped trays are indicative.
100mm diameter castor wheels, two are locking swivel type.
See our other listings for more of these stainless Trollies.
Skylarc Ref E200914
Stainless Steel Low Platform Trolley Frame.
40x20mm box and 30mm diameter tube stainless steel construction.
Low frame for adding a board or hauling baskets.
Low frame area is 800x825mm and 150mm above floor.
Includes 10x 820x400x75mm white plastic trays for drying fruit, nuts, or similar products.
Photos of unwrapped trays are indicative.
100mm diameter castor wheels, two are locking swivel type.
See our other listings for more of these stainless Trollies.
Skylarc Ref D200913
Stainless Steel Low Platform Trolley Frame.
40x20mm box and 30mm diameter tube stainless steel construction.
Low frame for adding a board or hauling baskets.
Low frame area is 800x825mm and 150mm above floor.
Includes 10x 820x400x75mm white plastic trays for drying fruit, nuts, or similar products.
Photos of unwrapped trays are indicative.
100mm diameter castor wheels, two are locking swivel type.
See our other listings for more of these stainless Trollies.
Skylarc Ref C200912
Stainless Steel Low Platform Trolley Frame.
40x20mm box and 30mm diameter tube stainless steel construction.
Low frame for adding a board or hauling baskets.
Low frame area is 800x825mm and 150mm above floor.
Includes 10x 820x400x75mm white plastic trays for drying fruit, nuts, or similar products.
Photos of unwrapped trays are indicative.
100mm diameter castor wheels, two are locking swivel type.
See our other listings for more of these stainless Trollies.
Skylarc Ref C201016
4mm thick
Foam insulation with silver lining
Unknown quantity
Skylarc Ref T174985
4 Chairs
Large table with heavy Duty legs
Skylarc Ref I166389
Stainless steel rectangular frame.
Removable horizontal roll bars
Roll bars approx 1800mm
Four swivel castor wheels mounted to base.
Two castor wheels fitted with foot-operated brakes.
Frame constructed from square section stainless steel tubing.
Skylarc Ref R201629
Brand Ardrich
Model SmartDri A292P
Type wide jet blade hand dryer
Includes HEPA filter
Product code HD15380
Colour white
Wattage 1250 W
Voltage rating 220-240 V AC
Current rating 6 A
Frequency 50 Hz
Quality reference number 037754
Disabled person compliant
EMC compliant C2184
Certificate of suitability Q070141 Australia
Manufacturer Ardrich Limited
Skylarc Ref S201630
Brand Ardrich
Model SmartDri A292P
Type wide jet blade hand dryer
Includes HEPA filter
Product code HD15380
Colour white
Wattage 1250 W
Voltage rating 220-240 V AC
Current rating 6 A
Frequency 50 Hz
Quality reference number 037754
Disabled person compliant
EMC compliant C2184
Certificate of suitability Q070141 Australia
Manufacturer Ardrich Limited
Skylarc Ref Q166371
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref P166370
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref O166369
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref N166368
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref M166367
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref L166366
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref K166365
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref J166364
Brand: Forman Building Systems
Product: Fibreglass Pipe Section
Density: 80 kg/m3
Length per section: 1000mm
Type: Iron or copper pipe section insulation
Finish: Plain
Nominal bore: 150mm
Wall thickness: 63mm
Pieces per carton: 4
Maximum service temperature: 450°C
Manufactured in New Zealand by Accumen Shapes Ltd
Skylarc Ref Q174982
Brand: Buro Seating
Model: 520 Buro Maxim
Chrome sled base frame
Stackable design
Skylarc Ref D166384
Brand: Karcher
Model: WD 2 Plus S
Model number: 1.628-053.0
Rated frequency: 50-60 Hz
Rated power: 1000 W
Protection class: IPX4
Tank capacity: 19 L
Colour: yellow and black housing with stainless steel tank
Includes flexible suction hose
Skylarc Ref I166363
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref L166340
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref K166339
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref J166338
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref I166337
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref H166336
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref G166335
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref W166351
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref V166350
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref U166349
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref T166348
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref S166347
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref R166346
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref F166334
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref Q166345
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref O166343
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref P166344
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref N166342
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref H166362
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref G166361
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref F166360
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref E166359
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref D166358
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref C166357
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref B166356
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref A166355
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref Z166354
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref Y166353
Manufacturer ShenZhou Energy Saving Technology Group Co Ltd
Product type rubber sheet Class 1
Width 1200mm
Length 10000mm
Thickness 30mm
Total area 12 square metres
Batch number A0308000
Production date 2020-11-04
Standard GB T 17794-2008
Skylarc Ref N174979
Brand: Living & Co.
Item number: LMO34S.
Model number: EM134AL7.
Microwave oven capacity: 34 litre.
Output power: 1100W.
Input power: 1500W.
Glass turntable inside.
Skylarc Ref L174977
Brand: Lifetime
Model number: 80247
Rectangular folding table
Plastic tabletop surface
Tabletop colour: light
Metal folding legs
Skylarc Ref Q166397
Brand: Gorilla Carts
Green steel mesh garden cart
Four pneumatic turf tires
Black metal handle with plastic grip
Pull handle connected to front steering axle
Steel mesh base and sides
Skylarc Ref P166396
Steel mesh garden cart
Four pneumatic turf tires
Black metal handle with plastic grip
Pull handle connected to front steering axle
Skylarc Ref S174984
3 Chairs
MDF construction table
Light woodgrain finish on top
Scratch on top