D.C.Ross
Auction finished on Tuesday the 30th of November -0001
FANUC Robocut Wire Cut Machine
$45,800
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q118074
Model: FANUC Robocut Alpha-0iC
Type A04B-315-B001#D5
Manufactured December 2003
X axis travel 320mm
Y axis travel 220mm
Z axis travel 180mm
U axis maximum travel +-60
V axis maximum travel +-60
Max workpiece weight 500kg
FANUC Series 180is-WB CNC Controller
Coolant tank
Power control box
Manuals
New stainless lockdown screws
Vice
High strength magnets
FANUC CNC Robodrill with Pallet Change
$30,100
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117591
Model: FANUC Robodrill Alpha-T14iC
Type A04B-0079-B101#BM
Manufactured 2001
X axis travel 500mm
Y axis travel 400mm
Z axis travel 330mm
Inner cabinet dimensions 1500mm x 900mm x 350mm
Table dimensions 500mm x 390mm
FANUC Series 16i-M CNC controller
14 tool carousel
BT30 spindle taper
8000rpm max spindle speed
Nobel SP3950B pallet changer
9 tool holders with a range of tooling
Manuals
Tidy machine straight out of work
To see this machine running:
https://youtu.be/IAPEBimTKtQ
Large Fias Universal Milling Machine
$21,226
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H118611
Model: Fias AF 2000x800
X axis travel 1650mm
Y axis travel 850mm
Z axis travel 900mm
Spindle nose to table max 1000mm
Spindle taper NT50
18 spindle speeds
30—2000rpm
Universal 360 degree head
Digital read outs
Horizontal spindle
2 arbor supports
Horizontal arbor
Table extension
D MCDM-4 copy head (not used in years)
Manufactured 1981
Recently had new bearings in head
Mill vice not included
But beefy machine ready for work
To see a video of this machine running:
https://youtu.be/i5KJXLydc0A
6mm Capacity Sheet Metal Guillotine
$19,150
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z118681
Model: QC12Y-6 x 3200mm Hydraulic Swing Beam Shear
Max cutting thickness 6mm
Max cutting width 3200mm
Manufactured 2008
Etsun E10 NC controller
Adjustable back gauge
Beam guarding
Foot controller
Super heavy duty machine straight out of work
Schmid 320 Ton CNC Fine Blanking Press
$13,251
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z118083
Schmid 2000 Type 61-320 (HRS 320)
320 ton pressing capacity
100 ton V-ring force
63 ton counter force max
30 ton stripping force
18 ton ejection force
Ram stroke 200mm
Cutting speed 10-44 m/s
Tool dimensions max 650mm x 650mm
Siemens Simatic OP37
Made 2000
Safety cabinet
Tool loading trolley
Loading brackets
Manuals
No tooling
Accessories
Tool loading subplates
The only one in NZ
You will need lifting machinery for loading
This machine weighs around 15 tons
Video of this machine running:
https://youtu.be/UESFUFBHGsU
Fine Sodick EDM Drill
$11,500
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117936
Model: Fine Sodick K1CN
CNC EDM hole drilling machine
Manufactured 2000
Three phase
Head X axis travel 200mm
Head Y axis travel 300mm
Max workpiece height 250mm
Table dimensions 400mm x 450mm
Runs from floppy disk
Includes cabinet with a wide range of accessories
Wire feed heads 0.3mm - 3mm
Selection of electrodes
Restitivity checker
Collets and guides
Assorted steel blocks
2 new 100 litre drums dielectric fluid
To see a video of this machine running:
https://youtu.be/ujrPLfbOrbQ
BV Vibratory Finishing Machine and Dryer Set
$8,507.50
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X118627
Two vibratory finishing machines and a dryer with control systems
Three phase
BV Ultravibe 5DR vibratory finisher
980mm diameter
BV 1200mm diameter dryer
Unknown model
BV Vibratory Finisher BV8S
1400mm diameter
Wilden type diaphragm pump
Tru Pro dust extractor
Control box
Will be uninstalled for collection
Graziano Three Phase Lathe
$7,600
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117984
Model: Graziano Sag 17
Bed total length 1930mm
Between centres 1300mm
Swing over gap 280mm
Swing over bed 230mm
Swing over cross slide 140mm
Throat diameter 50mm
X axis travel 1035mm
Y axis travel 161mm
12 speeds
Metric and Imp thread cutting
Forward and reverse
6hp mtr
Coolant pump
Change gears
Taper cutter
Travelling, fixed steadies
260mm three jaw chuck
260mm four jaw chuck
480mm face plate
Quick change post 7 tool holders
Collett chuck head & collets
Live, dead centres
Manual
To see this machine running:
https://youtu.be/07YNNSnU5XU
2 x 20FT Shipping Containers and Container Shelter Canopy
$7,551.01
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117705
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
Standard 20 foot high cube container. Condition - Good, again no obvious signs of leaks inside although floor is slightly worse condition than first container see photos.
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Note the buyer will need to disassemble.
Large Blohm Surface Grinder
$7,235
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H118065
Model: Blohm-Simplex 75
X axis travel 700mm
Y axis travel 460mm
Magnetic chuck dimensions 800mm x 500mm
Grinding wheel speeds 1400/2800rpm
300mm wheel diameter
Power traverse on all axis
5 x wheel hubs
9 x stones
Coolant tank
Electrical box
Manuals
Toolkit
Riser blocks and accessories
To see this machine running:
https://youtu.be/KsF3h7QPjjU
Caprice Vertical Milling Machine
$7,000
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A118682
Model: Caprice MT-949VR
3 phase
3 hp main motor
Morse taper No 3 main spindle
Manufactured 1990
2 speed ranges
70-500 rpm
600 - 4200 rpm
Bed dimensions 1250mm x 230mm
Manual feeds
Sino SDS6-3V Digital read outs
Coolant pump
Fitted with Vertex 150mm vice on rotating table
13mm drill chuck
Shigya Seiki Cylindrical Grinder
$6,821
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I118066
Model: Shigya Seiki G-27 (GAUG-27.60)
X axis travel 400mm
Distance between centres 600mm
Max workpiece diameter 150mm
Automatic traverse X axis and wheel plunge
Max wheel diameter 405mm
Max wheel head stroke 160mm
Max table stroke 770mm
No.4 morse taper spindle
Manufactured 1980
Coolant pump
Hydraulic power pack
Marpos measuring head and panel
5 grinding wheels
Wheel ballance kit
Internal grinding mounting
Faceplate
Chuck 200mm
Dogs
Manuals
To see this machine running:
https://youtu.be/eonP-I_jWv8
Agietron Spark Eroder
$6,722
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117946
Model: Agietron EMS-15
Manufactured 1976
X axis travel 320mm
Y axis travel 250mm
Z axis travel 175mm
Table dimensions 560mm x 370mm
Removable table with T-slot bed underneath
Three phase
Nikon MC-202 digital read out
Control box
Diaelectric fluid pump
Rotary head
Electrode machining block
Steels
Collet chuck
Microscope
Manuals
Cylindrical square
To see a video of this machine running:
https://youtu.be/aoPGeXVP-8I
Blohm-Simplex Surface Grinder
$6,700
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D118061
Model: Blohm-Simplex 7
Three phase
X axis travel 660mm
Y axis travel 275mm
Chuck dimensions 700mm x 300mm
Magnetic table
300mm wheel diameter
Removable guards
Max table load 520 kg
Grinding motor 4kw
Coolant tank
1400/2800 rpm wheel speed
Balance wheels
Spare grinding wheels
Manuals
4 hubs
Riser blocks
Tool kit
To see this machine running:
https://youtu.be/1zSgLV_wdHQ
Besco-Truecut Sheet Metal Guillotine
$6,450
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y118602
Model: Besco-Truecut 8/125
8 foot sheet metal guillotine
2530mm wide cutting width
3.1mm capacity
Blades in good condition
Back Gauge
To see a video of this machine running:
https://youtu.be/XF_9h0ai_Zo
Coordinate Measuring Machine
$6,050
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117920
Model: Brown and Sharpe Microval 3+ Coordinate Measuring Machine
Renishaw CMM Touch Trigger Probe System
Various probe tips and accessories
Collet set and tooling
Manuals
Computer and software
Granite worktop 610mm x 457mm x 80mm thick
X axis travel 356mm
Y axis travel 406mm
Z axis travel 305mm
Max workpiece height 381mm
Travel stabilisation frames
Printer
Toolbox
To see a video of this machine operating:
https://www.youtube.com/watch?v=WAXWoniLrSs&feature=youtu.be
2004 Holden Rodeo Double Cab
$6,040
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P118671
2004 Holden Rodeo Double Cab
175619km on clock
2 wheel drive
5 speed manual transmission
Isuzu 4 cylinder 3 litre diesel engine
Air conditioning
Power steering
Tow bar
Drop side flat deck
1810mm long x 1800mm wide
180mm tall sides
Tyres approx 75% all round
New catalytic converter
Damage to doors on passenger side
No current wof
Starts and runs well
Good basic ute with the scrapes and dings expected for a vehicle of this age.
Gairu 100 Ton Punch and Shear
$6,020
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z118629
Model: Gairu Suprema-16
Hydraulic ironworker
Three phase
100 ton pressing capacity
Flat steel cutting 250mm x 13mm
Angle 150mm x 150mm x 14mm
Punches, corner cutter, bar and angle cutting, round bar cutting
Assortment of punches and accessories
Super versatile heavy duty machine
Large McGregor Industrial Furnace
$5,573
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E118608
Model: McGregor FAC TEMP
30kw three phase electric heating
Max operating temperature 650 degrees celsius
Internal size 980mm x 870mm x 760mm
Automatic cycling
Pneumatic powered door
Fan forced
Vented
Jiang Ning Three Phase Lathe
$5,550
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U118000
Model: Jiang Ning Machine Works HG32 320x750
Total bed length 1160mm
X axis travel 600mm
Y axis travel 105mm
Distance between centres 750mm
Swing over bed 160mm
Swing over crossslide 100mm
12 speeds
39 - 2000 rpm
Metric and imperial thread cutting
Quick change tool post
160mm three jaw chuck
160mm four jaw chuck
290mm face plate
Steady
Manual
Accessories
Foot brake
Coolant pump
To see this machine running:
https://youtu.be/X0u90XM-MRA
Donau Radial Arm Drill
$5,400
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117956
Model: Donau Type DR 32
Three phase
Table dimensions 1070mm x 400mm
Morse taper no 3 spindle
18 speeds
41 - 1800 rpm
4 feed rates
4 x 19mm tee slots
Chuck to table 540mm
Great sized machine straight out of work
To see a video of this machine running:
https://youtu.be/CoupTL4A1ek
BV Vibratory Finishing Machine
$5,050
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F118609
Model: BV BV8S
Vibratory unit SFL30-25/4/SS/210752
3 phase
Manufactured 2001
Electrical control box
With sump
Formerly used with caustic for cleaning oil off parts, will need decontamination for repurposing
2 x 20FT Containers and Container Shelter Canopy
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117706
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
Standard 20 foot high cube container. Conditon - Good, again no obvious signs of leaks inside although floor is slightly worse condition than first container see photos.
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Frame construction: 48mm diam. 2.3mm gauge, hot dip galvanised structural grade steel
2 x 20FT Containers and Container Shelter Canopy
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117707
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
Standard 20 foot high cube container. Conditon - Good, again no obvious signs of leaks inside although floor is slightly worse condition than first container see photos.
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Frame construction: 48mm diam. 2.3mm gauge, hot dip galvanised structural grade steel
Roof material: 610gsm PVC, UV stabilised & fire retardant
Number of portals: 5
Number of purlins: 5
Please note this auction is strictly for the two containers and the shelter. This does not include the contajner ramps nor any other items in, on or around these units.
2 x 20FT Containers and Container Shelter Canopy
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117708
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
20 foot high cube containers
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Frame construction: 48mm diam. 2.3mm gauge, hot dip galvanised structural grade steel
Roof material: 610gsm PVC, UV stabilised & fire retardant
Number of portals: 5
Number of purlins: 5
Please note this auction is strictly for the two containers and the shelter.
Doall Heavy Duty Metal Cutting Bandsaw
$4,610
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T118025
Model: Doall V36
Three phase
Contour sawing band saw
36" (915mm) throat
250mm table to guide max capacity
Job selection wheel
775mm x 775mm tilting table
Table rip fence
Built in DBW 1 blade welder
Wide range of blade guides
Heavy load slides
Foot operated power feed
Variable speed
File guides
Spare blades
Manuals
Incredibly versatile saw of the highest quality
Agietron Spark Eroder
$4,510
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U117948
Model: Agieplus EMS-3
Agietron KOPF-30 head
Manufactured 1978
X axis travel 420mm
Y axis travel 320mm
Z axis travel 400mm
Tapped hole table dimensions 630mm x 500mm x 20mm
Tee slot table underneath
Dimensions 630mm x 500mm
Acurite MillMate digital read out
System 3R Orbi-cut chuck system
Rotary head
Collet set in case
Assorted electrodes
Fixed stage
Rotary stage
2 x electrode mounting chucks
Cincinnati ELR Universal Milling Machine
$4,120
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117976
Model: Cincinnati 307-12 Dial Type Milling Machine
3 phase
Overall table dimensions 1660 x 310mm
Tee slot length 1445mm
X axis travel 850mm
Y axis travel 340mm
Z axis travel 280mm
Spindle to table max 317mm
Spindle to table min 115mm
NT50 spindle
NT50 to NT40 adapter
X, Y, Z powerfeeds
22 spindle speeds
21rpm - 1485rpm
16 feed speeds
Optisyn 1500M digital read out
Lead drive mechanism
Gear set
2 x horizontal arbor mounts
3 x horizontal arbors
215mm vice
3hp motor
Manuals and accessories
Video of this machine running:
https://youtu.be/osiIqao63Kw
Air Compressor, Champion CSE 45
$4,110
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S118960
Air Compressor, Champion CSE 45.
Sullair Powered - Champion Marathon rotary screw compressor model CSE45.
780 KPA max working pressure.
48742 Service Hours.
Manufactured 2001.
Nominal motor power: 45KW @ 415V - 50hz.
Note this unit will be decommissioned for collection.
Mitutoyo Optical Comparitor
$4,100
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117927
Model: Mitutoyo PH-350A
Code No 172-101a
Analogue part inspection machine
Wide range of accessories
Centre stages 172-142
Imperial dials
Glass ruler NQ 6962
10 x Lenses
Lens set 20X 172-152
Vertical V blocks 172-140
Small centres
Horizontal B blocks 172-141
Riser blocks 172-143
Plain stage 250 x 150 172-131
Rotary vice 172-144
Angle table 172-171
5 x Lenses 172-150
50 x Lenses 172-153
2 spare bulbs
Cincinnati Tool Cutter Grinder
$3,930
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J118067
Model: Cincinnati No.2 Cutter and Tool Grinder
X axis travel 400mm
Distance between centres 540mm
Max workpiece diameter 240mm
360 degrees wheel and workpiece rotation
Grinding wheel speeds 3800/5650rpm
Three phase
100mm three jaw chuck
150mm four jaw chuck
Assorted wheels
Driving dogs
Covers
Lockdown bolts
Manuals
To see this machine running:
https://youtu.be/APEWusBOwfk
Bilstein Workshop Press
$3,709
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X118029
Model: Bilstein W465
Capacity 60000kg
Distance between sides 1060mm
Width of gap between horizontals 245mm
100mm diameter press end
Adjustable height platform
Pneumatic powered
Includes 2 x 80mm thick press blocks
John Heine Inclinable Press
$3,690
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G118610
Model: John Heine 203A Series 4
30 ton press capacity
Fitted with pneumatically operated guards
Three phase
Foot controlled
Tooling not included
To see a video of this machine running:
https://youtu.be/39_Hh8CiL7c
Moore Jig Grinder and Accessories
$3,530
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117938
Model: Moore Jig Grinder No. 3
Table dimensions 280mm x 610mm
Table movement 280mm x 450mm
Spindle to table 315mm max
Grinding wheel capacity 4.76mm - 125mm
Grinding speeds 6700 - 175000 rpm
Main spindle vertical travel 90mm
Wide range of accessories including
Slot grinder
Scope
8000 and 175000 rpm spindles
Positive stop
Sony LG10 Digital read out
Huge range of grinding wheels
Manuals
Single phase
To see a video of this machine running:
https://youtu.be/SWOehZN0ViI
Marlco Broach Press and Accessories
$2,750
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117595
Marlco bench mounted hand broach press
Mounted on stand to side of bench (will be removed for collection)
Approx 440mm stroke
Includes stand
5 small broaches
5mm, 8mm, 4mm, 6mm, 5/32" (cut short)
Wide range of collets
Sheet Metal Decoiler and Steel
$2,371
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W118600
Large coil steel decoiler
Approx 460mm inner diameter currently (adjustable)
Adjustable width to approximately 300mm
500mm arms
Currently with 170mm x 1mm thick coil of steel, unknown weight or length
Kasto Mechanical Hacksaw
$2,320
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117978
Three phase metal cutting hacksaw
2.2kw motor
540mm blade
Power blade rise
Manual vice
Belt drive
Coolant pump
Stop microswitch faulty
On wheels
To see this machine running:
https://youtu.be/7VzaQe2BbPc
Sunnen Honing Machine and Accessories
$2,071
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B118085
Model: Sunnen 650D
Single phase
Wide range of hones and accessories
Bench mounting bracket (will be unmounted for collection)
Foot controller
To see this machine running:
https://youtu.be/hu-DrrJuj60
Mitutoyo 11-Piece Micrometer Gage Set, 25-300mm Range
$2,050
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117231
Mitutoyo 11-Piece Micrometer Gage Set, 25-300mm Range.
Made in Japan.
Eleven Micrometers covering the 25mm to 300mm range.
Missing 0-25mm micrometer.
Includes wood case.
Condition - Micrometers and case show wear and use from workshop environment.
Tekko Surface Grinder
$2,010
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F118063
Model: Tekko SGH-400
X axis travel 300mm
Y axis travel 190mm
Magnetic chuck
Chuck dimensions 350mm x 150mm
Removable guards
200mm diameter grinding wheel
Manufactured 1966
Made in Japan
Power traverse
Manual horizontal and vertical feed
To see this machine running:
https://youtu.be/pk_762Ik9lE
Cincinnati Milacron Vertical Machining Centre
$2,010
Sold 13/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y118082
Model: Cincinnati Milacron Lancer 1250-50
X axis travel 1270mm
Y axis travel 660mm
Z axis travel 660mm
Nose to table max 860mm
Spindle BT50
24 tool magazine
Inner cabinet 3500mm x 1450mm x 800mm
Maximum spindle speed 6000rpm
Table size 1370mm x 660mm
Acramatic 850SX CNC controller
Spindle drive 22kva
Wired for 4th axis but not fitted
Manuals
Shipping bracket
Lifting eyes
Some accessories
Chip conveyor
Machine powers up, but looks to have lost settings.
Won't run
Unknown age, believed to be mid 1990's
This machine weighs around 9 tons.
28 Drawer Solid Timber Cabinet
$1,820
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A118916
28 Drawer Solid Timber Cabinet.
Wooden handles.
Looks to be constructed of oregon.
Top trimming broken off on left side and minor damage to the left side of unit (see photos).
Classic piece of industrial furniture
Please note that contents in, on or around this unit are NOT included in this lot.
Schmid Copy Milling Machine
$1,815.33
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117939
Model: Schmid K-25-3
True-trace model 1110 hydraulic copy head
Hydraulic power pack
X axis travel 350mm
Y axis travel 270mm
Z axis travel 200mm
Power feeds on all axis
Variable speed spindle
Table dimensions 1150mm x 326mm
Three phase
Range of accessories
Some manuals
B.V Ultravibe Vibratory Finishing Unit
$1,805
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E118270
B.V Ultravibe Vibratory Finishing Unit.
Model BV15DR - BV Ultravibe.
Unit has been stored outside.
Unit has not been tested.
Unable to find exact specifications.
Please see dimensions below to get an idea of capacity.
Schmid Heavy Duty Steel Decoiler
$1,710
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X118601
Feinstanz Ag Heinrich Schmid Rapperswil Schweiz
Adjustable width
Max steel width 350mm
Decoiler/leveler and straightener
Approx 10mm max thickness
6 rollers
Hydraulic lift arm with feed wheel
Forward and reverse
Manual or automatic control
Modernised with vsd
To see this machine running:
https://youtu.be/7uAMxTpLJY0
B.V Ultravibe Vibratory Finishing Unit
$1,505
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F118271
B.V Ultravibe Vibratory Finishing Unit.
Unknown Model - BV Ultravibe.
Unit has been stored outside.
Unit has not been tested.
Unable to find exact specifications.
Please see dimensions below to get an idea of capacity.
AISI4140 Alloy Steel Coil (2682Kg)
$1,245.98
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V118937
AISI4140 Alloy Steel Coil (2682Kg)
2682KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
Heavy Duty Workshop Tool 24-Drawer Storage Unit
$1,121.87
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117590
Heavy Duty Workshop Tool 24-Drawer Storage Unit.
Each drawer has an interior space of approx 560x500x50mm.
Top surface of unit has a 20mm thick MDF board attached with a hight above floor of 995mm.
A milling Tool Holder rack is attached to top and measures approx 840x420x210mm.
Non-Lockable drawers..
Note - Items seen on top of unit are NOT Included.
Condition - Unit shows moderate wear and usage. One ottom drawer is jammed shut. Some drawers need some adjusting to open.
Champion Compressors Air Dryer
$1,050
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W118964
Champion Compressors Air Dryer.
Champion compressor branded Air Dryer.
Could not find model number nor specifications though this was tested and runs with the champion marathon CSE45 listed here on TradeMe.
Only designation found: 36430.
Items in, on or around this unit are nor included.
This will be disassembled before pickup.
Chevalier Tool Cutter Grinder
$1,010
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117593
Model: Chevalier FG-30 Tool Cutter Grinder
Single phase
Capacity 32mm
X axis travel 247mm
Spindle travel 330mm
45 degrees wheel tilt adjustment
360 degree rotation of headstock
Max wheel diameter 127mm
Wheel speed 3450mm
Assorted collets (have surface rust)
Manuals
Hafco Mobile Girder Rail, 1000kg Capacity
$830
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117411
Hafco Mobile Girder Rail, 1000kg Capacity.
Adjustable height gantry from 2500 - 3600mm.
Mounted on Castors.
2300mm inside frame clearance.
Purchased from www.machineryhouse.co.nz in 2019.
Includes Assembly manual.
Note - Auction includes mobile Girder Rail unit and attached trolley only, the Chain hoist block and other items seen hanging from and located under unit are NOT Included.
Double Sided Hardware Storage Bin Rack w/ Supplies
$803
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117234
Double Sided Hardware Storage Bin Rack w/ Supplies.
Older side has 100x steel bins each approx 230x100x75mm. Some of these hold various springs, akken key type bolts, and more, many are empty as well.
Newer added on side has 120+ green plastic bins by Lsmdon in Size 5 and Size 6 versions. Most of these are filled with various new Washers, Allen key type bolts, steel pins, nuts, and more.
Main rack height is approx 470mm with an extension for a sign that rises to approx 1950mm.
Vintage Wood Workshop Workbench
$760
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117457
Vintage Wood Workshop Workbench.
Thick wood frame with 40mm thick wood top.
Lower shelves.
Unit shows heavy wear and use. Some cracks to boards, drill holes in top.
Note - There is NO backboard attached to this specific unit, the green board that is visible behind the Workbench in some photos is attached to another unit (see our other Workbench listings).
Oil Filtered Transfer Pump
$750
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G118922
Oil Filtered Transfer Pump.
Motor: Single phase induction motor.
BECY-UN, 50HZ, 230 - 460V, 1HP, 6AMP, 1455RMP.
Cannot find any information on the pump.
Pump Dimensions: L170mm x W170mm x H265mm.
Unknown specificstions or capacities.
This unit is home made (see lack of info) and has not been tested.
AISI4140 Alloy Steel Coil (2822Kg)
$750
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T118935
AISI4140 Alloy Steel Coil (2822Kg)
2822KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
Industrial Benchtop Drill Press
$710
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q117450
Industrial Benchtop Drill Press.
ID label is heavily worn, only able to decipher the bottom of the label which reads "Manufactured under licence GEC" Unable to verify the manufacturer, model or motor specs, see photo.
13mm keyed chuck, key included.
Includes 2x drill base Vices, one unit unbranded, second unit is a Record No. 44 drill press vice. No attachment bolts provided with Vices.
Condition - Drill Press shows typical industrial Workshop wear and usage. Unut will be unbolted and removed from tabletop before buyer pickup.
AISI4140 Alloy Steel Coil (2815Kg)
$710
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N118929
AISI4140 Alloy Steel Coil (2815Kg).
2815KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
Starrett Surface Roughness Tester
$705
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117229
Starrett Surface Roughness Tester.
Model No. 3800.
Invludes power cable, instruction manual, test surface and case.
Condition - Unit powers on and appears to operate but digital display seems to have a faulty section as some numbers do not fully display, see photos. Otherwise unit appears in good condition. Case exterior shows wear.
Remington Power 220,000btu Kerosene Diesel Heater
$703
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117423
Remington Power 220,000btu Kerosene Diesel Heater.
Model No. Silent Drive RPH22050PV
220,000 btu output.
49L tank capacity.
Uses Kerosene or diesel fuels.
Digital temperature control.
Digital hour counter reads 11 hours of usage.
Includes operation manual.
Condition - Shows light use matks. Operates normally.
Press Tool Holder and V Blocks
$700
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z118031
1100mm x 70mm square long four sided V block
920mm long x 20mm thick blade
700mm long x 25mm thick blade with 75mm round inner diameter press tool holder
550mm long x 30mm thick irregular section blade
Industrial Vibratory Conveyor
$700
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B118267
BV Polyurethane Industrial Finishing Vibratory Conveyor.
Uras Vibrator.
Model Kee-6-4B.
240V, 50hz, 1.6A, 1395RPM.
Unit has not been tested.
Condition - Unit was stored outside and has moderate surface rusting.
Industrial Plate Steel Table (Welding Table)
$695
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z118265
Industrial Plate Steel Table (Welding Table)
Heavy Duty Industrial Steel Plate Tabme with Vice.
30mm Top plate thickness.
Vice will need some refurbishment due to rust etc.
Table has been stored outside and has moderate surface rust.
Remington Power 220,000btu Kerosene Diesel Heater
$690
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117422
Remington Power 220,000btu Kerosene Diesel Heater.
Model No. RPH22050PV
220,000 btu output.
49L tank capacity.
Uses Kerosene or diesel fuels.
Digital temperature control.
Digital hour counter reads 50 hours of usage.
Includes operation manual.
Condition - Shows light use matks. Operates normally.
100cm Analog Caliper w/ Case
$685
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117210
100cm Analog Caliper w/ Case.
Unknown manufacturer.
Metric scale to 100cm at 0.02mm increments.
Imperial scale to 40 inches.
Includes wood case.
Condition - Caliper shows light signs of use. Case shows scratches and wear from workshop tool room storage
AND Benchtop Scale w/ Large Floor Weigh Pad & Stand
$650
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117233
AND Benchtop Scale w/ Large Floor Weigh Pad & Stand.
Includes:
-AND model FC-20K Benchtop Scale with 20kg capacity with 310x265mm weigh surface, digital controls.
- Unknown brand/model of heavy Duty floor weigh plate form with 1500kg max capacity, 1200x1200mm weigh surface, 140mm above floor.
- Heavy steel blue stand included, 1090mm high, 390x390mm top surface, thick solid steel base 610x405x50mm.
- Assorted power and control Cabling.
_User manual for small scale.
Condition - All items show Workshop wear and usage. Both small and remote large scales are operating but not tested for accuracy. Both may benefit from a clean.
Large Sheet Metal Decoiler
$650
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S118674
Heavy duty steel and flattener decoiler
Hydraulic lift arm with feed wheel
Hydraulic width adjustable
Approx 250mm max width
Modernised with vsd drive
Appears to be 5 roller
Machine has been outside for several years
60+ Assorted Small End Mills
$636
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117728
60+ Assorted Small End Mills.
Assorted brands.
Includes ball, Taper, finishing, square, corner Rounding, types and more.
Sizes from 1.0mm to 32mm.
Condition - Varies with each unit. Many appear unused, some new in cases.
Heavy Steel Workshop Cart Trolley
$630
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117433
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with approx 6mm thick plate steel top surface.
No handle attached or included but one end has bolts and bracket for buyer to attach one.
Condition - Shows typical workshop wear and grime. Some grease on surfaces. Some surface rust.
Large Set of Various Sized Collets (66 Pieces)
$620.55
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J118977
Large Set of Various Sized Collets (66 Pieces).
Sizes ranging from: Length: 27mm, Max Width: 17.5mm to Length: 45.8mm, Max Width: 40.4mm.
66 pieces. Please see photos for markings.
Antique Vintage Benchtop Metal Punch
$617.50
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117466
Antique Vintage Benchtop Metal Punch.
Unable to find any visible manufacturer name or model number.
Heavy 32kg weight.
Appears to originally have had a black finish with gold pin striping, see photos.
Includes assorted punch attachments within a much newer MDF case.
8 Drawer Industrial Steel Cabinet
$610.55
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U118416
Steel cabinet with contents
Bearing mounted slides
Front flip panels on drawers
Missing handles on bottom drawer
MDF top cover
Contents of sanding rolls
Large number of screws
Wire brushes
Heavy Steel Workshop Cart Trolley
$610
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117412
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Note - Auction is for trolley unit only, large item seen sitting on unit in photos is NOT included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Mitutoyo Surftest 201 Series 178 Surface Roughness Tester
$580
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117228
Mitutoyo Surftest 201 Series 178 Surface Roughness Tester.
Includes:
- Main unit code No. 178-931E.
- Read Head Gauge code No. 2007.
- operation manual.
- case of surface finish reference standards.
- partial case of Assorted other related items, see photos.
Protective case cover for main unit and read head.
Condition - Powers on and runs but have been told by staff that it has a faulty wire in read head, will require servicing. Also print ribbon is expended and needs replacing. Second included ribbon appears used.
Industrial Benchtop Drill Press by JS Richardson & Co
$565
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref R117451
Industrial Benchtop Drill Press.
Made in Australia by JS Richardson & Co.
Model No. E39.
Single phase electric motor.
13mm keyed chuck, key included.
Drilling material base approx 260x240mm.
Drill unit by itself is approx 1040mm tall.
Drill is bolted to a heavy Steel table with a approx 9mm thick plate steel top. Table is approx 660x585x760mm.
Drill unit can be unbolted from table for pickup.
Condition - Older model unit showing moderate wear and usage.
Heavy Steel Workshop Cart Trolley
$556
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117241
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
2x Sets of Mitutoyo Internal Micrometers, 25-300mm Range
$555
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117218
2x Sets of Mitutoyo Internal Micrometers, 25-300mm Range.
Made in Japan.
Includes:
- internal micrometer set with 25-50mm range.
- internal micrometer set with 50-300mm range.
Both have wooden cases.
Condition - Exterior of cases show Workshop toolroom storage wear, dust. Components inside are fine Condition. Each set msy be missing a piece or two, see photos.
Heavy Steel Workshop Cart Trolley
$555
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117413
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Note - Auction is for trolley unit only, large item seen sitting on unit in photos is NOT included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Workshop Workbench w/ Record Vice
$545
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117494
Workshop Workbench w/ Record Vice.
Steel frame with 20mm thick MDF boards for top and lower surfaces.
Includes Record brand No. 5 Benchtop vice.
Note - Any other items seen in photos on, in or near Workbench are NOT Included.
MDF boards show wear from workshop usage.
Industrial Bench Grinder w/ Steel Stand
$526
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117419
Industrial Bench Grinder w/ Steel Stand.
Unable to see a manufacturer and model number on the heavily worn label, see photo. Am able to decipher the words "Made in England" as well as "Ball Bearings" and a large number "7".
2800rpm.
Single phase.
Grinding wheel size is approx 150mm diameter.
Includes a heavy Steel stand with a cooling tray. Stand is approx 535mm long, 405mm wide, 810mm high.
Condition - Grinder and stand show moderate wear from workshop usage. Protective screens are missing over each Grinding wheel.
Mounted Multi-purpose Manual Sheet Metal Shear
$526
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I118924
Mounted Multi-purpose Manual Sheet Metal Shear.
Sitting on 3 leg work horse stand.
Work horse stand surface dimensions: L1220mm x W125mm x H795mm.
Blade length: 225mm.
Manual safety lock.
Heavy Steel Workshop Cart Trolley
$515
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117432
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with approx 7mm thick plate steel top surface.
No handle attached or included but one end has bolts and bracket for buyer to attach one.
Note - Items seen in photos on trolley are NOT Included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
SPFH590 Alloy Steel Coil (2660Kg)
$515
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C118944
SPFH590 Alloy Steel Coil (2660Kg).
2660Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
Schmid 320 Ton Fine Blanking Press
$510
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V118625
Model: Schmid 320 mp
320 ton pressing capacity
Manufactured 1979
Three phase
Manual controls
500kg tool lifting crane with electrical crane
Hydraulic power pack
No tooling included
You will need your own lifting machinery to load this machine
Weight is around 9 tons
To see a video of this machine running:
https://youtu.be/4hZKmXdH3hs
5x Rolls of 4.5x88mm Alloy Steel Strips, 3500kg
$505
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref R117321
5x Rolls of 4.5x88mm Alloy Steel Strips.
SAE1045 type steel.
4x Rolls in sealed bundle, plus an extra fifth unwrapped roll on top.
Each roll is 4.5mm thick, 88mm wide, lengths unknown.
Approx 3500kg total combined weight.
Condition - 4x Rolls are new and sealed in wrapping, one roll is as new but partially unwrapped.
Industrial Forklift Personnel Lifter Cage
$505
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117344
Industrial Forklift Personnel Lifter Cage.
Unknown manufacturer.
1000mm high side rails.
Inward oorning door.
Forklift Mast guard.
Condition - Has been stored outside. Some rust on surfaces. Unknown when last certified/inspected. Would benefit from a refurbishment.
6x Heavy Duty Stackable Steel Industrial Storage Bins
$505
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T117349
6x Heavy Duty Stackable Steel Industrial Storage Bins.
Raised floor approx 100mm above ground.
Inner storage area depth is approx 300mm, length approx 830mm, width 820mm.
One side has door for dumping materials.
Stackable design.
Condition - Moderate rust on surfaces. Some dented and bent components.
SPFH590 Alloy Steel Coil (2680Kg)
$505
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D118945
SPFH590 Alloy Steel Coil (2680Kg).
2680Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
Mitutoyo 192 Series Digimatic Height Gage
$501.10
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117292
Mitutoyo 192 Series Digimatic Height Gage.
Code No. 192-661
0-600mm range.
Uses 3x AA size batteries.
Includes operation manual and plastic cover.
Condition - Gage appears yo operate normslly but not tested for accuracy. Gage shows generally minor use and wear marks. Plastic cover shows more moderate wear.
Vernier Height Gauge by Chesterman
$501
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117223
Vernier Height Gauge by Chester man.
Made in England.
Model No. 369.
36cm max metric height, 14.5 inches max Imperial height.
Includes wood case and attachments, see photos.
Case exterior shows Workshop Storage wear.
250mm Diameter Mill Rotary Table
$501
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q117372
250mm Diameter Mill Rotary Table.
Made in China, unable to read ID plate as it is in Chinese, see photo.
250mm Diameter table.
Total unit length approx 310mm.
Rotates normally.
Shows grease and wear.
Hydrolic Power Pack/Pump
$501
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117712
Hydrolic Power Pack/Pump.
Unknown pack brand.
Pump seems to be a ASEA but could not find model.
Note considered industrial spares.
Not tested.
The auction does NOT include items in, on or around thjs unit.
Vintage Wood Workshop Workbench w/ Record Vice
$501
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117459
Vintage Wood Workshop Workbench w/ Record Vice.
Thick wood frame with 40mm thick top boards.
Main work surface 920mm above floor.
Lower storage shelf with sliding door.
Newer upper shelf added to main work surface.
455mm high back board.
Includes a newer Record No. 5 bench vice.
Includes attached Desk lamp.
Note - All other items seen on and around Workbench are NOT Included.
Workbench shows heavy Workshop wear and use.
4x Rolls of 3.2x116mm Alloy Steel Strips, 3502kg
$500
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q117320
4x Rolls of 3.2x116mm Alloy Steel Strips.
SAE1045 type steel.
FES134350.
4x Rolls in bundle, each roll is 116mm wide by 3.2mm thick, length is unknown.
3502kg total pallet weight.
New unopened bundle.
AISI4140 Alloy Steel Coil (2686Kg)
$495
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U118936
AISI4140 Alloy Steel Coil (2686Kg)
2686KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
Assorted Precision Squares & Straight Edge
$494
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V117221
Assorted Precision Squares & Straight Edge.
Includes:
- Preisser Germany DIN 875/00 Square 300x200mm.
- Preisser Germany DIN 874 straight edge 400mm length.
- Bocchi DIN 875/00 Square 75x50mm.
Each includes wood case.
Cases show wear and grime from workshop toolroom storage. Tools in fine condition.
Heavy Steel Workshop Cart Trolley
$483
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117431
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or included but one end has bolts and bracket for buyer to attach one.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
95x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
$482
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117534
95x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Sizes a range from 2mm up to 11mm.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
Vintage Heavy Wood Workshop Workbench w/ Record Vice
$475
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117461
Vintage Heavy Wood Workshop Workbench w/ Record Vice.
Thick wood frame with 40mm thick wood board top surface.
Lower storage with sliding doors.
Includes Record brand No. 36 Benchtop vice with 150mm wide Jaws.
Note - All other items seen on and in Workbench are NOT Included.
Workbench shows heavy wear and usage. Lower storage not fully inclosed.
AISI4140 Alloy Steel Coil (2823Kg)
$465
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref R118933
AISI4140 Alloy Steel Coil (2823Kg)
2823KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
Remington Power 220,000btu Kerosene Diesel Heater, Faulty
$460
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q117424
Remington Power 220,000btu Kerosene Diesel Heater, Faulty.
Model No. Silent Drive RPH22050PV
220,000 btu output.
49L tank capacity.
Uses Kerosene or diesel fuels.
Digital temperature control.
Digital hour counter reads 103 hours of usage.
Includes operation manual.
Condition - Shows light use marks on exterior. Internal error fail code E1 on digital display. Lockout rag states possible contaminated fuel, see photo.
Workshop Magnetic Lifting Block
$460
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117452
Workshop Magnetic Lifting Block.
ID label worn off so Manufacturer, model, and lifting specs are unknown.
Block measures approx 245x120x105mm excluding lever and top eyeloop.
Magnetic function is operating.
Heavy Steel Workshop Cart Trolley
$460
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117414
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Note - Auction is for trolley unit only, other items seen in photos sitting on and within unit are NOT included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Wooden Workbench with Grinder
$460
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117941
1220mm x 560mm wooden workbench
40mm thick solid timber top
920mm high worktop
2 shelves
GMF DS324/2R Tipper Tool Grinder
Single phase 1/2 hp
2850rpm
150mm wheels
Assorted mill lockdown bolts
Large Lot of Adjustable Reamers
$455
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117197
23 x adjustable reamers
Sizes include
23.75mm - 27mm
21.5mm - 23.75mm
25/32" - 27/32"
19.75mm - 21.5mm
21/32" - 23/32"
19.25mm - 19.75mm
23/32" - 25/32"
16 x assorted small reamers
Screw on extension pilots
Assorted nuts and accessories
22x Straight Tooth Mill Cutters
$455
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117548
22x Straight Tooth Mill Cutters.
Assorted brands.
All are Imperial Sizes.
Sizes range from 3" to 5" diameter with a variety of thicknesses.
Condition varies with each unit. Some are as new in original wax coating, some show rust spotting and possible usage.
2 x Replacement Vibratory Tumbler Bowls
$450
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C118268
2 x Replacement Vibratory Tumbler Bowls.
2 x B.V Branded Replacement Vibratory Rock Tumbler Bowls.
No indications on the exact size of these bowls but each individual bowl have approximate dimensions of 1400mm x 1400mm x 700mm.
Note these have been stored outside.
SPFH590 Alloy Steel Coil (2642Kg)
$435
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B118943
SPFH590 Alloy Steel Coil (2642Kg).
2642Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
60+ Assorted Mini End Mills & Drills
$421
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117724
60+ Assorted Mini End Mills & Drills.
Assorted brands.
Diameters down to 0.5mm.
See photos for further details on type and Id labels of what is included as it is too much to list in the allowed space.
Most are in original packaging and appear unused. A few are missing packaging, see photos
6x Workshop Welding Screens
$420
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117420
6x Workshop Welding Screens.
Four units with the semi transparent plastic welding sheeting.
Two units with sheet metal panels.
Steel frames.
All units are about similar size with lengths varying from approx 1170mm to 1240mm, widths at feet 600mm to 620mm, and heights from 1820mm to 1885mm.
Condition - Varies with each unit. Green plastic sheet unit appears good condition, red sheet units have modeate wear and tears, metal sheet units show dents and marks. All frames show rust.
5x Assorted Type Workshop Clamps
$416
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117409
5x Assorted Type Workshop Clamps.
Includes:
- 2x Carver clamps each approx 300m working length, 150mm working width, made in England.
- 1x Bessey clamp, approx 300mm working length, 125mm working width, made in Germany.
- 2x clamps marked as Made in Germany, unknown brand, both have 100mm working width, one is approx 1000mm long, other approx 300mm long.
Condition varies with each unit.
79x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
$414
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117535
79x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Sizes range from 6.5mm to 14mm (not all units inspected for size)
See photos for further type details.
Condition varies with each unit.
Heavy Duty Narrow Pallet Racking Type Shelf Unit
$409
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117410
Heavy Duty Narrow Pallet Racking Type Shelf Unit.
Unknown manufacturer.
8x orange horizontal beams each approx 2740mm long, 80mm wide.
4x vertical frames each approx 465mm wide, 1835mm tall. Note - two of these vertical frames are unused spares, see last photo.
4x 25mm thick MDF boards each approx 2740mm long, 405mm wide.
Note - Auction is for Shelving Rack unit only, all other items seen on and around unit in photos are NOT included.
28x Assorted Ball, Finish, & Square, End Mills
$406
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U117376
28x Assorted Ball, Finish, & Square, End Mills.
Assorted brands.
Diameters range from 2mm to 16mm.
Includes 4x bit stands/holders.
Condition - Varies with each unit. Most appear unused or were slightly used as most show no visible use marks.
6x Heavy Duty Steel Workshop Stackable Storage Bins
$405
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117435
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate surface rusting.
Heavy Steel Workshop Scrap Metal Bin
$405
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117342
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Condition - Some rust to surfaces.
3x Assorted Kennametal Modular Indexible Mill Drill Bodies
$402
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref R117399
3x Assorted Kennametal Modular Indexible Mill Drill Bodies.
Includes:
- KTIP 095R8SS10M, 8XD, 9.5mm dia.
- KTIP 135R5SS14M, 5XD, 13.5mm dia.
- KSEM130R7WN16M, 13.0mm dia. Includes special long Torx driver.
All drills Include cases. No other original accessories included.
Condition - All appear to possibly be unused but cannot verify. One drill has no index installed. Cases show grime and wear from workshop storage.
2x Sandvik Coromant Indexable Ball End Mills w/ Spare Indexes
$400
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117392
2x Sandvik Coromant Indexable Ball End Mills w/ Spare Indexes.
Short end mill unit is type R216-16B20-040.
Long end mill has been modified so most of type number is missing, only the last four digits are visible - R???-????0-045.
Includes 2x cases with a total of 14x spare Indexes type R216-1603 M-M.
Condition - Long end mill appears to have been modified on a lathe to make shank narrower, see photos. Short end mill does not appear to have been used but cannot verify. Spare Indexes are as new.
Three Parts Only Fine Blanking Presses
$400
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V118677
Two 320 ton and one 250 ton presses
Disassembled for transport and never put back into service
250 ton is known to be damaged
All mid to late 1970s
Includes power cabinets
No Hydraulic power packs
Believed to weigh approx 9 tons each
You will need your own lifting machinery to load these machines
46x Piece Tap & Die Set in Wood Case
$395
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117206
46x Piece Tap & Die Set in Wood Case.
Unsure of brand, many items are marked with GRD.THD England, a few other items have other brand markings.
Assorted metric sizes.
Longest unit is approx 545mm in length.
Some items show use while others appear unused. Wood case shows wear. Age of set is unknown.
43x Assorted Ball, Square, & Finishing End Mill Bits
$390
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref R117555
43x Assorted Ball, Square, & Finishing End Mill Bits.
Assorted brands.
Sizes range from 6mm up to 12mm.
See photos for further type details.
Condition varies with each unit. Some are as new with cases while others show varying usage.
SNCM220 Alloy Steel Coil (1800Kg)
$390
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W118938
SNCM220 Alloy Steel Coil (1800Kg)
1800KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
46x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
$385
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V117533
46x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Sizes range from 8.0, 8.5, 9.0, and 9.5mm (not all inspected).
See photos for further type details.
Condition varies with each unit, some include cases.
Pryor Steel Type Letter & Figure Marking Kits
$380
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117126
Pryor Steel Type Letter & Figure Marking Kits.
2 x Pryor Marking Technology - Interchangeable Steel Type Letter and Figure Marking Kits.
1 x Size 4 and 1 x Size 3.
See photos for more details.
Note some characters missing.
26x Assorted Finishing End Mill Cutters
$380
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q117554
26x Assorted Finishing End Mill Cutters.
Assorted brands.
Sizes range from 6mm up to 10mm.
Condition varies with each unit, some appear as new unused in cases while others show usage.
6x Heavy Duty Steel Workshop Stackable Storage Bins
$375
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117434
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate surface rusting.
Tambour Door Office Storage Cabinet by Precision
$375
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117356
Tambour Door Office Storage Cabinet by Precision.
Steel sides in a light grey.
Dark blue plastic tambour style doors.
Lockable, keys are included.
5x inner adjustable steel shelves.
Condition - Some dents to sides, see photos. Some matks on doors.
103mm Metal Mill Vice
$360
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117374
103mm Metal Mill Vice.
Solar branded, model unknown.
103mn wide Jaws.
Jaws open to approx 105mm.
Swivel base.
Mounting bolt slots approx 230mm apart on centre.
Older model unit showing moderate wear and grime from use. Jaws move smoothly.
SNCM220 Alloy Steel Coil (1753Kg)
$360
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L118927
SNCM220 Alloy Steel Coil (1753Kg).
1753KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1637Kg)
$360
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X118939
SNCM220 Alloy Steel Coil (1637Kg)
1637KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
Acetylene Welding Regulators, w/ Comet 3 Welding Torch
$356
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117442
Acetylene Welding Regulators, w/ Comet 3 Welding Torch.
Includes:
- BOC Comet 3 torch.
- NZIG Oxygen regulator.
- NZIG Acetalene regulator.
- 2x Spark making units.
- small wrench.
- length of welding hose.
3 x Varrying Gear Pullers
$355
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117150
3 x Varrying Gear Pullers.
1 x RM200 S45c 3 arm gear puller.
1 x RM100 S45c 3 arm gear puller with 3 HIT GP-100 arms.
1 x 4 Arm gear puller only have 3 arms of both fackom U306G1 and favor U306G2.
SNCM220 Alloy Steel Coil (1735Kg)
$355
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O118930
SNCM220 Alloy Steel Coil (1735Kg)
1735KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1786Kg)
$355
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z118941
SNCM220 Alloy Steel Coil (1786Kg)
1786KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
Assorted Lot of Milling Index Tips w/ 25-Drawer Storage Unit
$350
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117291
Assorted Lot of Milling Index Tips w/ 25-Drawer Storage Unit.
Brands include Sandvik Coromant, Kennametal, Iscar, TaeguTech, Valenite.
Assorted sizes/types, some cases without labels, some loose in bins.
Condition varies with each unit. Some index pieces are new and sealed in cases, some cases are partials, some index units appear used.
Heavy Steel Workshop Scrap Metal Bin
$345
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117448
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Note - Scrap metal seen in bin in photos will be removed before buyer pickup.
Condition - Some rust to surfaces. Bottom Support bar is bent at one end.
Workbench with Mill Lockdown Kits
$336
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S118024
40mm thick solid timber top
920mm high worktop
2 x roll out drawer trolleys
Shelves below
Record No. 5 125mm vice
Mount with large number of mill lockdown bolts
Box of mill bed nuts
Assorted mill lockdown plates
10x Pairs of Imperial Sized Mill Parallels w/ Case
$333
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117371
10x Pairs of Imperial Sized Mill Parallels w/ Case.
Unknown manufacturer.
Wood case.
All pairs are 6" long and 1/8" thick.
Includes the following widths:
- 1/2"
- 5/8"
- 3/4"
- 7/8"
- 1"
- 1 1/8"
- 1 1/4"
- 1 3/8"
- 1 1/2"
- 1 5/8"
Condition varies with each pair. Some have drill nicks along edges, etc, see photos. Box exterior shows grime and wear.
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes
$332
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117567
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Diameters range from 4" to 6".
Thicknesses vary from 1/32" to 13/64".
Condition varies with each unit.
16x Assorted Milling Chuck Collets w/ 5x Autolock Units
$331
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117572
16x Assorted Milling Chuck Collets w/ 5x Autolock Units.
Unknown brand of Collets. Overall dimensions of each collet is approx 43mm diameter and 55mm long. Assorted inner diameters.
Includes five various Clarkson and Larcher branded Autolock chuck units, see photos for further details.
2x Vintage Precision Engineering Set Square Tools
$329
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117445
2x Vintage Precision Engineering Set Square Tools.
Includes:
- Chesterman Sheffield No. 1970 set Square with wood case. Square is approx 670x363mm.
- Rabone Chesterman No. 9/12"/30 CM BSS 939. Square is approx 350x212mm.
Both units Made in England.
Wood case shows wear from age and use.
Sandvik Coromant Indexable Coolant Mill Cutter w/ Spare Indexes
$326.10
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117390
Sandvik Coromant Indexable Coolant Mill Cutter.
Type R416.2-0254W25-3.
Includes a partial box of replacement Indexes type LCMX 04 03 08-53 3040 (8x units in box), as well as a partial box of replacement indexes type LCMX 03 08-53 1020 (7x units in box).
Condition - Cutter shows some usage. End shank has had a section cut out for mounting purposes, see photos. Spare Indexes are as new.
20x Assorted Finishing End Mill Cutters & More
$325
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117552
20x Assorted Finishing End Mill Cutters & More.
Assorted brands.
Sizes range from 12mm up to 20mm.
Also includes 1x rounded edge end Mill and 1x jobber drill end Mill.
Condition varies with each unit, some appear as new unused while others show usage.
26x Assorted Slitting Milling Cutter Blades, Imperial Sizes
$325
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117568
26x Assorted Slitting Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Diameters range from 3" to 6".
Thicknesses vary from 1/32" to 1/4".
Condition varies with each unit, some appear unused with boxes, others show varying use.
35x Assorted Milling Chuck Collets
$320.20
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117573
35x Assorted Milling Chuck Collets.
Unknown manufacturer.
Each collet is approx 22mm diameter and 40mm long.
Assorted inner hole diameters.
See photos for further collet type details.
15x Assorted Corner Rounding End Mill Bits, Imperial Sizes
$320
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117524
15x Assorted Corner Rounding End Mill Bits, Imperial Sizes.
Includes Larcher and Clarkson brands
Includes the following sizes:
- 2x 1/2 inch
- 1x 5/8 inch
- 2x 3/8 inch
- 2x 5/16 inch
- 1x 1/4 inch
- 2x 3/16 inch
- 3x 1/8 inch
- 2x 1/16 inch
Sandvik Coromant Indexable Face Mill Cutter w/ Spare Indexes
$315
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117386
Sandvik Coromant Indexable Face Mill Cutter w/ Spare Indexes.
Type R300-015A20L-07L.
15mm diameter cut.
Includes 2x full cases of extra R300-0724E-PM indexes (20x units).
Condition - Shows generally minor signs of use. Spare Indexes are as new, one case still sealed.
7x Assorted Finishing End Mill Cutters, Metric & Imperial Sizes
$310
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U117558
7x Assorted Finishing End Mill Cutters, Metric & Imperial Sizes.
Assorted brands.
Sizes include:
- 2x 50mm
- 1x 42mm
- 1x 1 7/16"
- 1x 1 5/16"
- 2x units with worn off markings.
Condition varies with each unit.
SNCM220 Alloy Steel Coil (1629Kg)
$306
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P118931
SNCM220 Alloy Steel Coil (1629Kg)
1629KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
6x Heavy Duty Steel Workshop Stackable Storage Bins
$305
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117437
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate wear and use. Some rusting and denting.
SNCM220 Alloy Steel Coil (1745Kg)
$305
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q118932
SNCM220 Alloy Steel Coil (1745Kg)
1745KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SPFH590 Alloy Steel Coil (2622Kg)
$305
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A118942
SPFH590 Alloy Steel Coil (2622Kg).
2622Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
CompAir Hydrovane 178 Compressor
$305
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q117710
CompAir Hydrovane 178 Compressor.
3 Phase Air Compressor.
Model 1780.
30KW.
Tension [v/ph/hz]:400/3/50.
See photos for full specs.
Note this unit has not been tested and is sold as is where is. This auction does NOTE include items inz on or around this unit.
Large Industrial Workshop Racking
$305
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G118948
Large Industrial Workshop Racking.
Heavy duty steel construction.
4 Tier, 4 Post,12 Shelf Unit.
Individual bay space dimensions:
1830mm x 660mm x 525
Please see dimensions below.
Note items in, on or around this unit are NOT included.
This unit will need to be disassembled for transport by the customer.
Black & Decker Bench Grinder w/ Stand
$303
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117512
Black & Decker Bench Grinder w/ Stand.
Model No. BG/8M
2900rpm.
Uses 150mm diameter Grinding wheels
Grinder itself measures approx 350x220x225mm.
Mounted on a heavy Steel base stand approx 500x260x400m solid steel base with 880mm stand height.
Attached cooling bin.
Condition - Older model Grinder showing heavy wear and usage. Power cord shows a few breaks in outer casing, would benefit from a replacement. Grinder operates normally.
12x Assorted Morse Milling Drill Bits, Metric & Imperial Sizes
$302
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117721
12x Assorted Morse Milling Drill Bits, Metric & Imperial Sizes.
Assorted brands.
Includes the following sizes:
- 25mm (coated).
- 22mm (coated).
- 20mm (Coated).
- 15mm
- 21mm
- 21.5mm
- 13.5mm
- 17.5mm
- 23mm
- 24mm
- 25mm
- 41/64"
Condition varies with each drill.
60x Assorted Jobber Drill Bits
$301
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117722
60x Assorted Jobber Drill Bits.
Assorted brands.
Sizes range from 6.5mm to 18mm.
Some drills are coated, see photos.
Condition varies with each unit, some appear as new while others show varying levels of use.
Recoila Workshop Wall Mounted Air Hose Reel
$300
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117426
Recoila Workshop Wall Mounted Air Hose Reel.
Part No. AW1020.
Manufactured 2005
Unknown hose length.
Casing is approx 500mm diameter and 200mm wide.
Also includes attached air spray nozzle with orange hose line.
Unit will be removed from wall before buyer pickup.
Condition - Unit shows typical workshop usage and wear.
3x Assorted Lathe Boring Bars
$300
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117303
3x Assorted Lathe Boring Bars.
Includes:
- Sandvik Coromant type R166.4KF-25F16, measures 300mm in length, with case.
- Kennametal type A20Q-NNTOR2 NF6, 180mm in length, Includes case.
- Boring Bar marked S20S-CTFPR 11, brand unknown, 250mm length.
Condition varies with each unit.
21x Assorted Corner Rounding End Mill Bits, Metric Sizes
$296
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117525
21x Assorted Corner Rounding End Mill Bits, Metric Sizes.
Clarkson and Larcher brands.
Includes the following sizes:
- 1x 16mm
- 1x 12mm
- 2x 10mm
- 2x 8mm
- 2x 6mm
- 2x 5mm
- 3x 4mm
- 4x 3mm
- 1x 2.5mm
- 3x 2mm
Condition varies with each unit.
Large Lot of Long Series Drill Bits
$295
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M118382
Approx 45 drills total
Includes
Titex plus HSS UFL 12mm 480mm long
Sutton 6.5mm 350mm long
Evacut 12mm 300mm long
Sutton 6mm 260mm long
Sutton 6mm 330mm long
2 x Sutton 6mm 225mm long
Evacut 10mm 250mm long
Wide range of other assorted long drills
Iscar Ball Nose Indexable Mill Cutter w/ Spare Indexes
$295
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117339
Iscar Ball Nose Indexable Mill Cutter.
Type CM D16-B-C20.
Includes a case of spare Indexes type CR D160-QF IC328 (9x units).
Condition - Cutter shows minor use marks. Spare Indexes are as new.
29x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
$285
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117536
29x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Sizes Include 10mm, 15mm and 16mm (not all verified).
See photos for further type details.
Condition varies with each unit
Mitutoyo Digimatic Upright Gauge w/ Dial Inducator
$281
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117227
Mitutoyo Digimatic Upright Gauge w/ Dial Inducator.
Made in Japan.
Includes:
- Digimatic Upright Gauge 7050.
- Dial Indicator 2046S.
Cicular platform approx 40mm diameter.
Heavy Steel Workshop Scrap Metal Bin
$281
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117341
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Note - Scrap metal seen in bin in photos will be removed before buyer pickup.
Condition - Some rust to surfaces.
BT Lifter Pallet Jack
$275
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117232
BT Lifter Pallet Jack.
Made in Sweden.
Model No. L2000/11
Lifting capacity 2000kg.
910mm long forks
155mm fork width with 375mm gap between each fork.
685mm total unit width.
Fork height from approx 85mm up to approx 200mm.
Condition - Unit shows typical workshop wear and usage.
3 Full Sets of Insert Cutting Tools
$273
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O118982
3 x ISCAR Cutting Insert Tool Full Sets.
1 x 10 piece Sandvik Coromamt 10 Peice R390-17 04 08M-PM 1130 Coro Mill 390 Inserts - Unopened.
1 x Victory VSM490-15 Series Shoulder Mill Insert XNPU-MM【10 Pieces Per Package】
1 x Unknown Set HSD 040-078-040 40 L/S.
3x Heavy Duty Steel Workshop Stackable Storage Bins
$266.50
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V117351
3x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All units show surface rusting, some denting, etc.
8 x Lathe Tools
$264.50
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117990
Sandvik corona C45 in 22mm x 10.5mm holder
Iscar Cut-grip GGHN-32-3DG in Sandvik 150.2—2520—25 holder
Iscar Cut-grip GGHN-32-3DG
Iscar HFFR 140-4T30 one end broke
Armstrong No.21 holder with cutting tool
JS. 45S holder with cutting tool
Iscar Tang-Grip TGFH 26-2 with tool Holder
Seco US101—0808 holder with cutting tool
6x Heavy Duty Steel Workshop Stackable Storage Bins
$255
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117436
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate wear and usage. Denting and some surface rusting.
38x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
$255
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117537
38x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Sizes Include 17mm, 18mm, 19mm and 20mm (not all verified).
See photos for further type details.
Condition varies with each unit
SNCM220 Alloy Steel Coil (1706Kg)
$255
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M118928
SNCM220 Alloy Steel Coil (1706Kg).
1706KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
B.V Ultravibe Vibratory Finishing Unit
$255
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D118269
B.V Ultravibe Vibratory Finishing Unit.
Model BV15DR - BV Ultravibe.
Unit has been stored outside.
Unit has not been tested.
Unable to find exact specifications.
Please see dimensions below to get an idea of capacity.
17x Assorted Lathe Boring Bars
$252
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117587
17x Assorted Lathe Boring Bars.
Unknown manufacturers.
Lengths range from approx 95mm to 160mm.
Diameters range from 11mm to 19mm.
Some units can be used with either end, see photos.
Condition varies with each unit. Some appear unused while others show wear and usage.
18x Assorted Convex Radius & Bevel Mill Cutters, Imperial Sizes
$250
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117564
18x Assorted Convex Radius & Bevel Mill Cutters, Imperial Sizes.
Assorted brands.
Cutter diameters range from approx 70mm up to approx 110mm.
Assorted Imperial cutting widths and assorted angles.
Condition varies with each unit.
5 x Heavy Duty Stackable Steel Industrial Storage Bins.
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117709
5 x Heavy Duty Stackable Steel Industrial Storage Bins.
Raised floor approx 100mm above ground.
Inner storage area depth is approx 300mm, length approx 830mm, width 820mm.
One side has door for dumping materials.
Stackable design.
Condition - Moderate rust on surfaces. Some dented and bent components.
Macnaught Retracta Workshop Wall Mounted Retractable Hose Reel
$240
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117421
Macnaught Retracta Workshop Wall Mounted Retractable Hose Reel.
Made in Australia.
Model number unknown.
Max pressure 17 bar, 1.6MPa, 250psi.
Hose length Unknown.
Casing approx 450mm diameter, 240mm wide.
Unit will be dismounted from wall before buyer pickup.
Large Assortment of Workshop Consumables
$235
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117174
Large Assortment of Workshop Consumables.
50+ individual items including but not limited to:
Metal cutting liquid, metal polish, solving fluid, adhesive, rust protection, cleaner, girnding paste, threadlocker, thinner, lubricants and much more.
Note alot of these are used (not full/new).
Cannot Ship due to dangerous goods.
10x Staggerd Tooth Mill Cutters
$235
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117547
10x Staggerd Tooth Mill Cutters.
Includes:
- 1x Clarkson 6" x 5/8" x 1"
- 1x Clarkson 6" x 1/2" x 1 1/4"
- 1x Clarkson 6" x 3/8" x 1"
- 1x Sheffield 5" x 3/16" x 1:"
- 1x Clarkson 4" x 1" x 1 1/4"
- 1x Clarkson 4" x 3/16" x 1 1/4"
- 1x Sheffield 4" x 5/8"
- 2x Sheffield 4" x 1/4"
- 1x Clarkson 3" x 3/4" x 1"
Condition varies with each unit. Most appear to be possibly unused but older stock.
Vintage Heavy Wood Workshop Workbench
$235
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117469
Vintage Heavy Wood Workshop Workbench.
Thick wood frame with 40mm thick wood board top surface.
Lower storage shelf.
Workbench shows heavy wear and use. Front sliding doors missing. No rear or side panels.
Note - Items seen on and in Workbench are NOT Included.
Lot of Assorted Rubber Mallets
$230
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U117168
Lot of Assorted Rubber Mallets.
7 various mallets and a hammer.
Brands and Designations
Sunnex x2, Blue-Point BC4A x 1, Snap-On HBFE56 56oz/1550 x 2, Snap-On HBFE32 32oz/900 x 1 and Generic 4LB Black Smith hammer.
See photos for more details.
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes
$230
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117566
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Diameters range from 3" to 8".
Thicknesses vary from 1/32" to 1/8".
Condition varies with each unit.
Workshop Wall Mounted Air Hose Reel by AK Reels
$225.50
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V117429
Workshop Wall Mounted Air Hose Reel by AK Reels.
Unknown model number.
Made in Australia.
Unknown hose length.
Includes attached air gun nozzle, see photos.
Unit will be unmounted from wall before buyer pickup.
4x Assorted Lathe Turning Tools
$225
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117516
4x Assorted Lathe Turning Tools.
Includes:
- Seco Tools CTGPL 2020-16.
- Seco Tools CTGPR 2020-16.
- Unknown brand PDJNR 2020K-15.
- Unknown brand 20680-041.
See photos for further type details.
SNCM220 Alloy Steel Coil (1719Kg)
$225
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y118940
SNCM220 Alloy Steel Coil (1719Kg)
1719KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
21x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
$222
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117538
21x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Metric and Imperial Sizes.
Sizes range from 5/32 to 23/32 imperial and 11.5mm to 20mm Metric.
See photos for further type details.
Condition varies with each unit
31x Assorted Sizes of Keyset & T--Slot Mill Cutters
$219
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117526
31x Assorted Sizes of Keyset & T--Slot Mill Cutters.
Most units appear to be Keyset type.
Mix of Metric and Imperial Sizes
Sizes range from 3/8x3/32 imperial to 1212 metric (Clarkson brand)
Brands include Clarkson, P&N, Balfour, and more.
Condition varies with each unit.
Mobile Industrial Workshop Workbench
$219
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N118955
Mobile Industrial Workshop Workbench.
Steel frame construction.
Various hanging points/tool holders.
Sitting on 4 x 100mm caster wheels.
4 shelfs.
Note this lot does NOT include items in, on or around unit.
UHT TurboLap TLL-07 Pneumatic Lapping Tool Kit
$215
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117137
UHT TurboLap TLL-07 Pneumatic Lapping Tool Kit.
Includes UHT Turbolap TLL-07 Air Lapping Tool and Air Regulator. Also other miscellaneous pieces.
Lapping tool features:
For polishing molds
Easy-grip rubber cover designed to reduce fatigue
Super Collet that holds the abrasive stone tight
The 0.7 mm standard stroke works for all-around operations
Includes hose with coupler to be ready for use on the spot
2 x Lifting Chains
$215
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T118909
2 x Lifting Chains.
1 x 7.1mm sized 1740mm length lifting chain with 2 x Kito VSO63 hooks (Cert Expired 02/2020).
1 x 7.1mm sized 665mm length lifting chain with 2 x Pewag KLHW8 10 hooks (Cert Expired 02/2020).
Please see photos of plates for capacity working load limit.
Iscar Ball Nose Indexable Mill Cutter
$215
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117388
Iscar Ball Nose Indexable Mill Cutter.
Type CM D16-B-C20.
Includes a case of spare Indexes type CRF D160-QF IC950 (5x units).
Condition - Cutter appears to have been put on a lathe to have a section of its shank narrowed, see photos, but otherwise shows few very light signs of possible use. Spare Indexes are as new.
Iscar ShredMill Indexable Mill Cutter w/ Spare Indexes
$215
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117804
Iscar ShredMill Indexable Mill Cutter w/ Spare Indexes.
Cutter type FRW D064A080-06-27-16.
Includes 35x compatible index units.
Condition - Cutter shows use and wear. A few spare Indexes show some use though most appear unused.
5x Assorted Lifting Chain Hooks
$210
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117204
5x Assorted Lifting Chain Hooks.
Includes:
- 2x 7/8-8 SY CL AS hooks.
- 1x 1 1/2 hook.
- 1x WLL 3.2T 10-8 3/8 H1.7 hook.
- 1x 10-8 WLL 3.2T hook.
Condition - Varies with each unit. Some show little to no use while others show wear and use.
3x Straight Tooth & 3x Staggered Tooth Mill Cutters
$210
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117549
3x Straight Tooth & 3x Staggered Tooth Mill Cutters.
Includes the following Staggered Tooth Cutters:
- 1x Clarkson 6" x 1/2" x 1"
- 1x Clarkson 6" x 5/8" x 1
- 1x Clarkson 6" x 3/4x 1 1/4"
Includes the following straight tooth Cutters:
- 1x Sheffield 6" x 3/32" x 1"
- 2x 6" Cutters with no visible ID marking.
Condition varies with each unit.
2x Sandvik Coromant Indexable Mill Cutters
$210
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117805
2x Sandvik Coromant Indexable Mill Cutters.
Includes:
- Cutter type 32D3R115A32-SSP12.
- 8x spare Indexes for above Cutter, index type SCMT 12 04 08-UR 4225.
- Cutter type R215.64-36A32-6012.
Condition - Cutters show some usage and wear. Spare Indexes appear unused.
Van Norman Piston Turning and Grinding Machine
$210
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E118036
Model: Van Norman No. 3 Re-Li-O
Piston Turning and Grinding Machine
Three phase
160mm chuck
Has been used as a cut off machine by the current user
Missing chuck turning belt and pully
Runs but unsure what needs doing to return to its original function.
To see this machine running:
https://youtu.be/mnv-UNJWTgA
Magnetic Base Stand w/ Girod Dial Indicator Gauge
$208
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117487
Magnetic Base Stand w/ Girod Dial Indicator Gauge.
Unknown brand/model magnetic Base Stand. 230mm total height with approx 250mn long horizontal side bar attachment.
Inudes attached dial indicator Guage made in Switzerland by Girod. Tast model.
Condition - Gauge appears to function normslly but not tested for accuracy. Magnetic Base has company name etched into it.
14x Assorted Ball, Square Edge, & Finishing End Mill Bits
$206
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117540
14x Assorted Ball, Square Edge, & Finishing End Mill Bits.
Includes sizes 21mm, 25mm, and 26mm.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
Workshop Magnetic Broom Sweeper
$205
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117447
Workshop Magnetic Broom Sweeper for picking up Steel pieces from workshop floor.
210mm diameter wheels.
Magnetic plate approx 515mm in width.
Total unit width approx 650mm.
Lever for releasing picked up scrap.
Handle length approx 1150mm.
Condition - Shows typical workshop wear and usage. One wheel is a bit out of alignment.
Heavy Steel Workshop Scrap Metal Bin
$205
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117343
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Condition - Some rust to surfaces.
Large 2400mm Wide Wall Mounted Office Whiteboard
$205
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117357
Large 2400mm Wide Wall Mounted Office Whiteboard.
OfficeMax branded.
Measures 2400mm wide, 1200mm tall.
Magnetic backing.
Includes 2x magnetic erasers and magnetic marker tray with markers.
Condition - Some dents to board surface. Some thin black tape lines have been added.
Mettler BB244 DeltaRange BasBal Digital Scale
$201
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117213
Mettler BB244 DeltaRange BasBal Digital Scale.
Made in Switzerland by Mettler Toledo AG.
Model No. BB244.
100mm diameter weighing platform.
Condition - Protective plastic cover shows yellowing and wear from use. Scale itself shows few minor marks. Accuracy not tested.
11x Assorted Rough End Mill Bits
$200.99
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T117531
11x Assorted Rough End Mill Bits.
Metric and Imperial Sizes.
1x 10mm
3x 12mm
1x 16mm
2x 20mm
1x 20mm
1x 25mm.
1x 3/4 Inch.
1x unit unable to read markings
Condition varies with each unit.
2x Heavy Duty Steel Workshop Horses
$200
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117238
2x Heavy Duty Steel Workshop Horses.
Each unit is approx 1350mm long, 895mm tall, 1010mm wide at base.
30mm wide removable aluminium top beam cover.
Note - Item seen on horses is not included.
6x Assorted Dovetail Cutters & 6x Assorted Bevel Cutters Milling Bits
$200
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117530
6x Assorted Dovetail Cutters & 6x Assorted Bevel Cutters Milling Bits.
All units appear to be Clarkson brand.
Includes the following Dovetail cutters:
- 2x 1 1/2 inch at 55 degrees.
- 2x 1 1/2 inch at 45 degrees.
- 1x 1 1/2 inch at 60 degrees.
- 1x 5/8 Inch at 60 degrees.
Includes the following Bevel cutters:
- 4x 1 1/2 inch at 60 degrees.
- 2x 1 1/2 inch at 45 degrees.
Condition varies with each unit
TaeguTec Indexable Coolant Mill Cutter w/ Spare Indexes
$200
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117389
TaeguTec Indexable Coolant Mill Cutter.
Type TDR 4210-25T2-06
21mm cutting diameter.
Includes partial case of spare Indexes type SPMG 060204-DG TT9030 (4x units).
Condition - Cutter shows generally minor use marks. Spare Indexes are as new.
Heavy Steel Workshop Material Storage Rack Shelving Unit
$200
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117430
Heavy Steel Workshop Material Storage Rack Shelving Unit.
9x shelves each approx 1100mm long, 490mm wide.
Note - Items seen on and around rack are NOT Included!
Condition - Rusty surfaces.
Iscar Indexable End Mill Cutter w/ Spare Indexes
$196
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117395
Iscar Indexable End Mill Cutter w/ Spare Indexes.
Cutter type N9MT11T3CT.
Includes 3x spare Indexes type ADKT 150550R-HM IC328.
Condition - Cutter appears unused but cannot verify. Spare Indexes are as new.
Wooden Workbench with Vice
$195.50
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A118266
Wooden Workbench with Vice.
Medium Sized Wooden Workbench.
Comes with attached vice (made in England).
Includes space for a drawer which has been removed.
Condition - This unit has been stored outside and has moderate ware.
3 x 27 Letter Marking Punch Sets
$192
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117155
3 x 27 Letter Marking Punch Sets.
1 x Priority England 27 letter 5mm marking punch set.
1 x Eclipse England 27 letter 3mm marking punch set.
1 x Eclipse England 27 letter 1.5mm marking punch set.
Uryu UMG450 Pneumatic Die Grinder Set
$188
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117135
Uryu UMG450 Pneumatic Die Grinder Set.
Die grinder comes with various assorted attachments/pieces.
Made in Japan.
For full specifications please see the PDF link below:
https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.uryu.co.jp/english/webcatalog/pdf/57.pdf&ved=2ahUKEwiDh8j48KzqAhVIwjgGHUqDCdgQFjABegQIBBAB&usg=AOvVaw1aCvM5ECftEiUr1WvemgOF
13x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
$186
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117539
13x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Includes sizes 21mm, 22mm, and 24mm.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
8x Assorted Ball, Square Edge, & Rounded Edge Mill Cutters
$183
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117545
8x Assorted Ball, Square Edge, & Rounded Edge Mill Cutters.
Includes:
- 2x 22mm
- 1x 24mm
- 1x 25mm
- 1x 26mm
- 1x 30mm
- 1x 32mm
- 1x 36mm.
See photos for further type details.
Condition varies with each unit.
13x Assorted Finishing End Mills
$183
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117378
13x Assorted Finishing End Mills.
Brands include Iscar, Ultra Tool, Hanita.
10x with 10mm Diameter Shank and 73mm length, 3x with 8mm diameter Shank and 64mm length.
Condition - Varies with each unit. Most show few or no signs of use.
Iscar Indexable Thread Tap End Mill Cutter w/ Spare Indexes
$176
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117387
Iscar Indexable Thread Tap End Mill Cutter.
Type MTSR0021H21.
Includes a case of spare type MT21E 16UN IC928 indexes (2x units).
Condition - Mill Cutter appears unused, as new. Spare Indexes are as new.
Industrial Horizontal Storage Racking
$176
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C118970
Industrial Horizontal Storage Racking.
Blue painted steel frame construction.
Could be used to store pipes and or sheet metals.
Outside post measurements: 1040mm x 880mm x 80mm.
Inside post height: 1150mm.
Total unit dimensions below:
Note this unit has been stored outside and aa such has minor to moderate surface rust.
Does NOT include the items in, on or around this unit.
scar Indexable Tap Threader End Mill
$175.73
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117393
Iscar Indexable Tap Threader End Mill.
Type MTSR0012F14.
Includes 1x index unit in case, type MT14 I 2.50 ISO IC908.
Includes Hex Key tool.
Condition - End Mill appears unused but cannot verify. Index is as new in case.
Sandvik Tool Holder 392.14020-50 32 100 w/ Kennametal Attachment
$174.73
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117260
Sandvik Tool Holder 392.14020-50 32 100.
Includes Kennametal attachment. Type is unknown as ID stamp is not visible, attachment approx 120mm long, 25mm diameter.
4x NT35 Type Mill Tool Holders w/ Assorted Collets & More
$174
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U117584
4x NT35 Type Mill Tool Holders w/ Assorted Collets & More.
Unable to find a manufacturer mark.
Includes 10x long Collets in assorted Metric sizes.
Includes 7x short Collets, Unkmoen if compatible with Tool Holders?
Includes steel case 210x210x90mm.
See photos for further details on type of tool holders and other included components.
Assortment Of Circlip Pliers (Stahlwille, Will)
$169
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117181
Assortment Of Circlip Pliers (Stahlwille, Will).
1 x Stahlwille - Chrom Vanadium 85 - 165 Straight Circlip Pliers.
1 x Stahlwille - Chrom Vanadium 85 - 165 90° Circlip Pliers.
1 x Siochrome 175 Straight Circlip Pliers.
1 x Will 183/225 Straight Circlip Pliers.
2 x Unknkwn brand circlip pliers. (Red, Yellow).
1 x Knipex Vanadin small 90° circlip pliers
1 x Unknown Noga tool.
14x Assorted Slitting & Gear Milling Cutter Blades, Imperial Sizes
$168
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117569
14x Assorted Slitting & Gear Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Includes one Sutton gear cutter type 8-12 2-3/4" 90degree x 1.
Includes one Sheffield straight tooth cutter type 5 x 5/32 x 1.
Includes 12x Assorted sizes of Slitting Cutters with diameters from 3" to 6" and thickness from 1/4" to 1".
Condition varies with each unit, some appear unused with boxes, others show varying use.
Makita 4304T Top Handle, Orbital, Variable Speed Jig Saw
$167
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117131
Makita 4304T Top Handle, Orbital, Variable Speed Jig Saw.
230-240V, 2.6A, 50-60Hz, 600W.
Use with optional blade (B-16L) allows cutting up to 135mm thickness.
Tool speed can be adjusted between 500 and 3,000 strokes per minute by turning the adjusting dial.
Lock lever is positioned straight up, making for easy use from right or left.
4x Assorted NT50 Type Mill Tool Holders
$167
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117575
4x Assorted NT50 Type Mill Tool Holders.
One unit has a 13mm Jacobs Chuck branded chuck with key.
Another unit is stamped with 50-NS-40, 173587.
Remaining two units have no visible id marks.
See photos for further type details.
All appear to be older units.
Bosch GWS 24-180 LVI Professional Angle Grinder
$166
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117133
Bosch GWS 24-180 LVI Professional Angle Grinder.
Rated input power 2,400.
W No-load speed 8,500 rpm.
Grinding spindle thread M 14.
Main handle Bow (rotating).
Disc diameter 180 mm Weight 5.4 kg.
Switch Protection.
10x Assorted Convex Radius Mill Cutters, Imperial Sizes
$162
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117562
10x Assorted Convex Radius Mill Cutters, Imperial Sizes.
Nine units are Selson branded in the following sizes:
- 2x 13/32"
- 4x 5/16"
- 3x 3/16"
One unit has no visible markings.
All cuttter diameters are approx 113mm.
Condition varies with each unit.
4x Industrial Radius Gage Sets
$160
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117214
4x Industrial Radius Gage Sets.
Unknown manufacturer for both units.
2x blue case Metric sets of 0.5mm to 13mm.
2x clear case imperial sets, one of 1/32 to 3/8 and one of 5/32 to 1/2.
Condition - cases show wear from workshop tool room. Gages appear good. One set is missing a Gage as marked on case.
CP (Chicago Pneumatic) CP-860R Air Grinder
$160
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117144
CP (Chicago Pneumatic) CP-860R Air Grinder.
Flex-collet chuck for 4" shank burrs and 22,000 RPM rated mounted stones.
Quiet rear exhaust. Only 84 dBA.
With facility to attach 78 dBA sound reducing hose.
FAST AND POWERFUL. 72 hp motor develops 22,000 RPM.
VERSATILE. Works well on metal, rubber & other materials.
COMPACT. 1¼ Lbs. and 5¾" long.
Iscar Indexible Mill Face Cutter w/ Spare Indexes
$157
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117801
Iscar Indexible Mill Face Cutter w/ Spare Indexes.
Cutter type H490 F90AX D063-4-27-17.
Includes 8x extra indexes type H490 ANKX-170608PNTR IC830.
Condition - Cutter shows use and wear. Indexes are unused, index case shows Workshop Storage wear.
Insize Digital Caliper + 2x Insize Micrometers
$156.93
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117224
Insize Digital Caliper + 2x Insize Micrometers.
All Insize branded.
Includes:
- 150mm digital caliper model 1108-150.
- 2x 0-25mm Micrometers, both model 3203-25A.
All include plastic cases.
Cases show exterior Workshop grime and wear.
19x Assorted Finish, Rounded Edge, & Square End Mill Bits, Imperial Sizes
$156
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117556
19x Assorted Finish, Rounded Edge, & Square End Mill Bits.
Assorted brands.
Assorted Imperial Sizes from 7/16" to 5/8".
Condition varies with each unit.
26x Assorted Tapered End Mills
$156
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T117375
26x Assorted Tapered End Mills.
Assorted angles and sizes.
Assorted brands.
Taper angles range from 1 degree to 20 degrees.
Shank diameters range from 6mm to 16mm.
Condition - Most appear to be unused or were very lightly used. Case shows storage wear.
Assorted Lot of Various Hammers and Mallets
$153
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117173
Assorted Lot of Various Hammers and Mallets.
4 x Aluminum Mallet/Hammer.
3 x Snap-On Blue-Point Rubber Mallets.
1 x Ball Point Hammer.
1 x Claw Hammer (broken).
1 x Mallet Hammer.
2x Kieninger Indexable Ball End Mill Cutters w/ Spare Indexes
$151.10
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117394
2x Kieninger Indexable Ball End Mill Cutters w/ Spare Indexes.
Short Cutter type EBG R12.012AN130.
Long Cutter type EBG R12.012AR160.
Includes a partial case of replacement Indexes type LC610T (8x units).
Condition - Larger cutter appears unused but cannot verify. Smaller cutter has been cut shorter, see photos. Spare Indexes are as new.
Sandvik Coromant Tool Holder 392.14020-50 40 120 w/ Attachment
$151
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117263
Sandvik Coromant Tool Holder 392.14020-50 40 120.
Unknown brand/model attachment. Only a stamp D38.0 is visible. Attachment length approx 145mm, diameter 38mm.
SNCM220 Alloy Steel Coil (1713Kg)
$151
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S118934
SNCM220 Alloy Steel Coil (1713Kg)
1713KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
AroLube Workshop Wall Mounted Air Hose Reel
$149
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T117427
AroLube Workshop Wall Mounted Air Hose Reel.
Model No. ARR7115.
15-meter hose length.
Casing is approx 290mm diameter and 140mm wide.
Unit will be removed from wall before buyer pickup
Erickson DV50BEM40110M Tool Holder w/ Large Attachment
$143
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117250
Erickson DV50BEM40110M Tool Holder.
Includes a large attachment with no visible ID stamps so Unknown brand/model. Attachment is approx 180mm long, 46mm diameter.
See photos for more type details.
Blue-Point AT350 ⅜" Pneumatic Impact Wrench
$142
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117140
Blue-Point AT350 ⅜" Pneumatic Impact Wrench.
Snap-On Blue-Point Branded.
Model: AT350.
3/8" Heavy Duty Compact Air Impact Wrench.
Max 90 PSI.
10,000 RPM.
Butterfly Directional Throttle.
Sykes Pickavant Hydraulic Twin Leg Puller
$142
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117148
Sykes Pickavant Hydraulic Twin Leg Puller.
Puller Spread Min - Max: 70 - 220mm.
Puller Reach Max: 225mm.
Ram Extension: 30 / 140mm.
1 x S-P No. 150000 Hydraulic Ram.
2 x S-P No. 086215 Legs.
Lot of 12 Collapsible Steel Storge Boxes.
$141.50
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T118259
Lot of 12 Collapsible Steel Storge Boxes.
12 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
NT40 Type Mill Tool Holder w/ Mill Cutter Attachment
$141.20
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117509
NT40 Type Mill Tool Holder w/ Mill Cutter Attachment.
No visible identification marks on tool Holder.
Only partial marks on Cutter are visible. Cutter has 25mm diameter cut. See photos for further type details.
Pair of 220mm Hardened Steel Mill Parallels
$141
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117475
Pair of 220mm Hardened Steel Mill Parallels.
Unknown manufacturer.
Both stamped with "Mill 2".
220x60x10mm each.
Condition - A few small nicks from drill bits on edges, see photos.
Assorted Lot of Precision Indicator Guages
$141
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C118918
Assorted Lot of Precision Indicator Gauges
1 x Mercer England Precision Measuring Dial Indicator Gauge Type 301 - Analog Gauge, seems to be working but hasn't been checked for calibration.
4 x Mitutoyo digital precisiin indicator guages (2 of which have been tested as working but not calibrated.
4 broken gauges useful for parts.
Office Desk w/ Mobile Drawer Unit
$140.20
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117355
Office Desk w/ Mobile Drawer Unit.
Faux Wood top laminate with dark grey laminate sides with MDF inner core.
Desk is 1500x750x730mm.
Includes Faux Wood Laminated monitor stand 500x305x95mm.
Dark grey mobile drawer unit 480x475x660mm.
Note - Auction includes only the three above mentioned items, all other items seen in photos on, under or nearby are NOT Included.
Condition - Desk shows generally lighter signs of use. Mobile has tape residue and some surface marks.
4 Sets of Imperial Steel Marking Sets
$140
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117156
4 Sets of Imperial Steel Marking Sets.
1 x 9 peice 3.175mm (⅛") number marking set (0 - 8)
1 x 20/27 peice 5mm incomplete (missing: a, b, d, e, f, n, p) letter marking set.
1 x 26/27 peice 3mm incomplete (missing: n) letter marking set.
1 x 27 peice 1.5mm complete letter marking set.
Sandvik Coromant Indexable Mill Cutter R390-032A32-17M
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117807
Sandvik Coromant Indexable Mill Cutter R390-032A32-17M.
Includes Torx driver, tube of Molykote 1000, and box.
Condition - Cutter shows wear and use. Appears to have been narrowed by a lathe, see photos.
2x Rolls of Cold Rolled Steel Strips, 3x75mm Size
$138
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117418
2x Rolls of Cold Rolled Steel Strips.
AHD-635
3mm thick, 75mm wide, length of each roll unknown.
Cold Rolled NZCC SD.
Approx 400kg total weight.
Material ID labels attached.
Condition - New unused workshop material stock.
Office Desk w/ Mobile Drawer Unit & Chair
$134
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117354
Office Desk w/ Mobile Drawer Unit & Chair.
Faux Wood top laminate with dark grey laminate sides with MDF inner core.
Desk is 1500x750x730mm.
Light green laminated mobile drawer unit 475x465660mm.
Executive style gas lift desk chair with black vinyl surfaces.
Note - Auction includes only the three above mentioned items, all other items seen in photos on, under or nearby are NOT Included.
Condition - Chair shows wear and use, especially on arm rests, see photos. Desk and mobile show generally lighter signs of use.
Lot of 8 Collapsible Steel Storge Boxes
$133
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D118997
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Office Desk w/ Mobile Drawer Unit & Chair
$128
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117353
Office Desk w/ Mobile Drawer Unit & Chair.
Faux Wood top laminate with black laminate sides with MDF inner core.
Desk is 1500x750x730mm.
Light grey mobile drawer unit 495x450665mm.
Eden Spectun 3 gas lift desk chair with black fabric.
Note - Auction includes only the above three mentioned items, all other items seen in photos on, under or nearby are NOT Included.
Condition - Mobile Unit shows some wear to laminate and marks. Desk and chair show generally lighter signs of use.
Tool Holder ER 50 Type w/ Sandvik Milling Attachment
$126
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117257
Tool Holder ER 50 Type w/ Sandvik Milling Attachment.
Unable to find a by ID markings on tool Holder so manufacturer and type is unknown, see photos for type details.
Includes attachment Sandvik R390-080027-17L, Dc=80mm, 873463.
PWB Swiss Tool Boy Milling Tool Holder Changing Station w/Mill Tool Storage Rack
$126
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117496
PWB Swiss Tool Boy Milling Tool Holder Changing Station
Hole for Tool is 70mm diameter.
Overall tool Holder dimensions 320mm long, 160mm wide (at base), 155mm tall.
Rotateable from horizontal to vertical.
Includes a yellow Mill Tool holing rack that can accomadate six milling Tool Holders. It measures approx 600x150x145mm with Tool holes approx 70mm diameter.
Condition - Both units show Workshop wear and use.
Two Air Recieving Tanks
$126
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X118965
Two Air Recieving Tanks.
Attached to steel frame.
Unknown capacity.
Single tank dimensions to give an idea;
400mm x 400mm x 1550mm.
Will be disassembled before pickup.
Pipework to be disconnected at first joint.
26x Assorted Combination & Box Wrenches
$124
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V117325
26x Assorted Combination & Box Wrenches.
Brands include Ikeda, Sidchrome, Infar, Powerbuilt, Aigo, Acesa.
Includes the following sizes:
- 1x 36-30mm open ended wrench.
- 5x 30mm.
- 1x 28mm.
- 2x 27mm
- 1x 25mm.
- 5x 24mm.
- 1x 23mm.
- 1x 21mm.
- 1x 20mm box wrench.
- 3x 19mm
- 1x 16mm
- 1x 9mm
- 1x 8mm
- 1x 7mm
- 1x 6mm
Condition varies with each unit.
3 Sets of Marking Punches
$123.02
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117158
3 Sets of Marking Punches.
1 x Priority Branded Number Marking Punches (0 - 9) 5mm.
1 x Priority Branded Alphabet Marking Punches (A - Z) 3mm.
1 x Symex Branded Alphabet Marking Punchds (A - Z) 3mm.
scar Indexable Ball End Mill Cutter, w/ Spare Indexes
$121
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117391
Iscar Indexable Ball End Mill Cutter.
Type CM-D16-B-C20.
Includes a partial case of Indexes type CR D160-QF IC328 (5x units in case).
Condition - Cutter appears to have been modified on a lathe to make the shank narrower, see photos. Extra indexes are as new.
Heavy Steel Workshop Storage Shelving Rack Unit
$121
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117446
Heavy Steel Workshop Storage Shelving Rack Unit.
Unit appears custom built from heavy steel lengths, see photos.
Appears to be bolted together with large Allen key type bolts.
Note - Items seen in photos and under rack are NOT Included.
Note - Buyer will need a large trailer/truck to remove rack, or bring appropriate sized allen keys and mallets to dissasrnble themselves.
Crate of Industrial Spares (Chain Hoist Equipment)
$112
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U117714
Crate of Industrial Spares (Chain Hoist Equipment).
GIS 250-500KG Chain Hoist.
Other chain hoist equipment, cables, chains, power boxes etc.
Unsure if functioning but would be good for spare parts etc.
Lot of 8 Collapsible Steel Storge Boxes
$110
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117702
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
$109
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117703
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
L Shaped Industrial Steel Shelving
$107
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X118913
L Shaped Industrial Steel Shelving
18 Adjustable Shelves.
Note this unit is haphazardly assembled and may need to be disassembled on collection for transport.
Does NOT includes in, on or around this unit.
4x Assorted Lathe Turning Tools
$105
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117522
4x Assorted Lathe Turning Tools.
Includes:
- Seco Tools CTGPR 2525-16
- Seco Tools CTFPR 2525-16
- Unknown brand hR117.17-2525
- Unkmown brand hR126.17-2525
See photos for further type details.
2x 180mm C Clamps
$104
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117407
2x 180mm C Clamps.
Unable to read manufacturer label, see photo.
Approx 180mm inner gap.
Distance from threaded bars to opposite steel clamp bar is approx 320mm.
One unit is missing threaded bar turning lever.
Heavy Duty Steel Industrial Storage Bin
$103
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117345
Heavy Duty Steel Industrial Storage Bin.
Raised floor approx 200mm above ground.
Inner depth is approx 410mm.
One side has door for dumping materials.
Note - Scrap metal seen in photos in bin will be emptied before buyer pickup and is NOT included.
Condition - Moderate rust on surfaces.
Heavy Steel Material Storage Rack Unit
$103
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117417
Heavy Steel Material Storage Rack Unit.
Includes 6x removable sheet steel shelves.
Auction includes storage rack unit only, all other items seen on and around unit are NOT Included.
Condition - Unit shows moderate surface rusting from outdoor exposure. Some bent frame bars.
13mm Keyed Jacobs Drill Chuck w/ Morse Tapper Attachment
$102
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117368
13mm Keyed Jacobs Drill Chuck w/ Morse Tapper Attachment.
Chuck made in USA by Jacobs.
13mm capacity.
Chuck key included.
Morse tapper type 34-06 6 mounting attachment.
Tesa 150mm Digital Precision Caliper w/ Case
$102
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117720
Tesa 150mm Digital Precision Caliper w/ Case.
Made in Switzerland by Tesa.
Includes wood case.
Case exterior shows Workshop wear. Caliper operates notnskky but has not been tested for accuracy.
3 Sets of Reverse Marking Punches
$101.01
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117161
3 Sets of Reverse Marking Punches.
1 x Set of A-Z 4.7mm reverse marking punches.
1 x Set of A-Z 4.7mm reverse marking punches (missing A and E).
1 x Set of A-Z 3.175mm reverse marking punches.
4x Assorted Ball, Square Edge, & Finishing End Mill Bits
$101
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117541
4x Assorted Ball, Square Edge, & Finishing End Mill Bits.
Includes 3x 30mm and 1x 31mm units.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
Dormer 4-Piece Mill Reamer Kit
$101
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117381
Dormer 4-Piece Mill Reamer Kit.
Manufactured by Dormer.
Includes:
- HSS-E 206
- HSS-E 706
- HSS-E 107
- HSS-E 407
Includes case.
Condition - reamers show few minor signs of use. Case exterior shows grime and wear from workshop storage.
Lot of 8 Collapsible Steel Storge Boxes
$100.50
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E118998
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Set of GenieGrip Mats
$100
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U118286
Set of GenieGrip Mats
Specifically designed for exceptional grip and load stability. They are constructed from a carefully selected rubber compound that is incredibly strong, non-marking and oil resistant.
1220mm x 125mm.
28x Assorted Kennametal Mill Cutter Indexes
$99.33
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117806
28x Assorted Kennametal Mill Cutter Indexes.
Includes the following types:
- 18x SPPX09T310MD, KCPK10.
- 9x DFT05T308MD, KCU40.
Condition - Leftover unused workshop supply stock.
Sandvik Coromant Mill Cutter
$97
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117515
Sandvik Coromant Mill Cutter.
Unfortunately only the Sandvik label is still discernable, the specific part number unfortunately can no longer be read. Approx diameter of cutter is about 137mm
Tool Holder mount end is approx 75mm diameter.
18x Assorted Lathe Boring Bars
$96.50
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y117588
18x Assorted Lathe Boring Bars.
Unknown manufacturers.
Diameters range from approx 3mm to 16mm.
Lengths from approx 58mn to 166mm.
Conditiin varies with each unit. Some appear unused while others show varying levels of usage.
Lot of 8 Collapsible Steel Storge Boxes
$96.50
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref V118989
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
8x Assorted Carbide Tiped Lathe Cutting Turning Tools by Narex & Cintride
$96
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117202
8x Assorted Carbide Tiped Lathe Cutting Turning Tools.
Includes:
- 2x Narex DN3716 ISO 6R 20 20 P30 tools.
- 2x Narex DN3716 ISO 6R 16 16 P20 tools.
- 1x Narex S3 25 25 P30 tool.
- 2x Cintride 111/E183/5TR 20x20 tools.
- 1x Cintride 17/E183/5TR 16x16 tool.
Condition - All appear to be unused leftover Workshop stock.
8x Assorted Ball, Square Edge, & Finishing End Mill Bits
$96
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117542
8x Assorted Ball, Square Edge, & Finishing End Mill Bits.
Includes 3x 32mm and 2x 34mm, 2x 35mm, and 1x 36mm units.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
11x Assorted Square & Rounded Edge End Mill Bits, Imperial Sizes
$94
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117561
11x Assorted Square & Rounded Edge End Mill Bits, Imperial Sizes.
Four rounded edge end Mills and seven square end Mills.
Imperial sizes range from 1 3/16" to 1 3/4".
Condition varies with each unit.
Assorted Small Parts (Compression Springs, Grease Nipples, Cir-clips)
$92.50
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A117122
Assorted Small Parts (Compression Springs, Grease Nipples, Cir-clips).
1 x Champion Assortment Kit of various sized Cir-clips.
1 x Champion Assortment Kit of various sized Compression Springs.
1 x Champion Assortment Kit of various sized Metric Grease Nipples.
1 x Fastening Supplies Kit of Imperial Grease Nipples.
Please see photos for specified sizes and basic idea of quantities.
4 x Imperial Steel Marking Stamp Sets
$92
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117157
4 x Imperial Steel Marking Stamp Sets.
1 x Complete Number Stamp Set (0 - 8) 6mm.
1 x Complete Alphabet Stamp Set (A - Z&) 6mm.
1 x Partial Alphabet Staml Set (missing: b, e, k, p) mm.
1 x Assorted Set (Includes: F, S, U , T, X, V, W, Y, N, E , P, &) Various Sizes.
21x Sandvik Coromant CoroKey Mill Indexes WCMX 06 T3 08 R-53
$92
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O117396
21x Sandvik Coromant CoroKey Mill Indexes WCMX 06 T3 08 R-53.
Includes 14x of subtype 3040 and 7x of 1020.
Condition - One case is still factory sealed as new. Other two cases are partials with unused Indexes within.
Assorted Grease Guns/Grease Tubes and Dispenser Guns
$90
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117171
Assorted Grease Guns/Grease Tubes and Dispenser Guns.
5 x Assorted Sized/Branded Grease Guns.
9 x New Castril Molub-Alloy 6040/460-1 1/2 Calcium Complez Grease.
2 x Tube Dispenser Guns.
2x Lathe Knurling Tools
$90
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117517
2x Lathe Knurling Tools.
Includes:
- J&S model 1015 Knurling tool.
- unmarked Knurling tool.
Both tools have Lathe mounting bar of approx 110mm long 28mm wide, 13mm thick.
Unmarked toll has missing knurler wheel.
Both appear to be older units.
Lot of 8 Collapsible Steel Storge Boxes
$89.50
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117700
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Mobile Industrial Workshop Bench/Trolley
$85.53
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D118971
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Includes small wooden under carrage step or shelf.
Not this lot does NOT include items in, on or around unit.
Note this unit has been left outside and has moderate surface rust.
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin
$85.20
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117441
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin.
Heavy duty steel frame finished in yellow
140mm diameter heavy Duty Castors.
Trolley is approx 550mm long, 620mm wide, 410mm tall.
Side bars extend above frame to serve as pins for holding the Included material storage bin.
Storage Bin is approx 630mm long, 550mm wide, 390mm high.
One side panel of bin slides off for dumping contents, etc.
Condition - Both units show moderate workshop wear and use.
Note - See our other listings for group auctions of more bins compatible with this trolley.
12x Assorted Convex Radius Mill Cutters, Imperial Sizes
$84.50
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117563
12x Assorted Convex Radius Mill Cutters, Imperial Sizes.
Assorted brands.
Diameters of disks range from approx 50mm to 112mm.
Cutting widths range from 0.087" to 1".
Condition varies with each unit.
4x Assorted T--Slot Mill Cutters, Imperial Sizes
$83
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117527
4x Assorted T--Slot Mill Cutters, Imperial Sizes.
All are Clarkson brand.
Includes the following sizes:
- 1 33/64 x 11/16 (2x units)
- 1 45/64 x 51/64
- 1 21/64 x 37/64
Condition varies with each unit.
Stackable Industrial Storage Bin
$83
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P118957
Stackable Industrial Storage Bin.
Steel construction stackable storage bin/box.
Includes a door at front of unit.
Dimensions listed above are for external size.
Internal dimensions below:
L830mm x W790mm x H300mm.
Kennametal Indexible Mill Cutter w/ Spare Indexes
$83
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117803
Kennametal Indexible Mill Cutter w/ Spare Indexes.
Unknown cutter type number as shank has been modified and Id markings removed in the process, see photos.
Includes a total of 12x Indexes in types EDPT180516PDSRGE (1x index) , EDPT180516PDSRGD (3x Indexes), EDPT180508PDERGD (3x Indexes), and EDPT180532PDERGD (5x Indexes).
Electric Die Grinder Kit
$82
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117176
Electric Die Grinder Kit.
Fuller branded 230-240V 50Hz - 130W (8000-30000tr/min) rotary tool/die grinder.
Blue plastic carrying case (note the case is slightly damaged).
Assorted die grinder pieces (see photos)
9x Assorted Wrenches, Imperial Sizes
$82
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117327
9x Assorted Wrenches, Imperial Sizes.
Brands include Sidchrome, Stahlwille, Aigo.
Sizes include:
- 2x 1 1/4"
- 1x 1 5/16"
- 1x 1 1/16"
- 2x 11/16"
- 1x 3/4"
- 1x 1 1/16" box wrench.
- 1x 1 7/8"
Condition varies with each unit. Two Wrenches have broken box ends, see photos.
Lot of 8 Collapsible Steel Storge Boxes
$82
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref A118994
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Large Mobile Workshop Shopvac Vacuum
$81.06
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117415
Large Mobile Workshop Shopvac Vacuum.
ID labels are missing on unit so manufacturer and model are unknown.
Blue plastic tank body approx 410x410x560mm in size.
Mounted on Castors.
Apoeare to be a drain hose attached to bottom, see photos, so unit likely wetor dry usage.
Includes suction hose and 880mm long hard tube attachment, no other end attachments included.
Condition - Unit shows heavy industrial Workshop use and wear, see photos. Appears to operate.
2x Heavy Duty Stackable Steel Industrial Storage Bins
$81
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U117350
2x Heavy Duty Stackable Steel Industrial Storage Bins.
Raised floor approx 100mm above ground.
Inner storage area depth is approx 300mm, length approx 830mm, width 820mm.
One unit has one side that has door for dumping materials. Second unit does not have a side door.
Stackable design.
Condition - Moderate rust on surfaces. Some dented and bent components.
4x Staggerd Tooth Mill Cutters
$80
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117546
4x Staggerd Tooth Mill Cutters.
Includes:
- 2x Clarkson 8" x 1/2" x 1 1/4" Cutters.
- 2x Moore 8" x 1/2" x 1 1/4" Cutters.
Condition - 2x Cutters are unused and still in original wax coating. 2x Cutters are opened but unsure if used, dirty from long term storage.
Lot of 8 Collapsible Steel Storge Boxes
$79
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z118993
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
4 Sets of Assorted Small Parts (Washers, Pins and Circlips)
$78.62
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117123
Assorted Small Parts (Compression Springs, Grease Nipples, Circlips).
1 x Automotive Products Kit of various sized Red Fibre Washers.
1 x Automotive Products Kit of various sized Taper Pins.
1 x Automotive Products Kit of various sized Circlips.
1 x Automotive Products Kit of various sized Cotter Pins.
Please see photos for specified sizes and basic idea of qtys.
Toledo Benchtop Scale
$77
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117230
Toledo Benchtop Scale.
Model No. 8582.
Metric and Imperial outputs.
Top weigh plate approx 370x275mm.
Condition - Unit shows heavy industrial wear and usage. Digital display is very dim and hard to read. Appears to be operating but has not been tested for accuracy.
Lot of 8 Collapsible Steel Storge Boxes
$77
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y118992
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
NT40 Type Mill Tool Holder w/ 125mm Grinding Wheel Attachment
$76
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M117576
NT40 Type Mill Tool Holder w/ 125mm Grinding Wheel Attachment.
Unable to find any ID marks on tool Holder.
See photos for further tool and Grinding wheel details.
Both units show wear and usage.
Mobile Industrial Workshop Workbench
$76
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref O118956
Mobile Industrial Workshop Workbench.
Green Steel frame construction.
Includes hanging hooks and various part and tool storage.
3 shelves.
Sitting on 4 x 100mm caster wheels.
Note this lot does NOT include items in, on or around unit.
26x Assorted Ball End Mill Cutters, Metric & Imperial Sizes
$74
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref R117529
26x Assorted Ball End Mill Cutters, Metric & Imperial Sizes.
Assorted sizes. Sizes range from 5/32 up to 3/4 inch in Imperial and 4mm to
20mm in Metric.
Condition varies with each unit. Some include cases.
Lot of 8 Collapsible Steel Storge Boxes
$74
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W118990
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Ullrich 850mm Double Sided Aluminium Step Ladder
$72.24
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref R117425
Ullrich 850mm Double Sided Aluminium Step Ladder.
Unknown model number and weight capacity.
Made in Dunedin.
Steps on both sides.
850mm height when opened.
Unit shows typical workshop wear and grime.
Mobile Industrial Workshop Bench/Trolley
$72
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref M118954
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Not this lot does NOT include items in, on or around unit.
Assorted Milling Index Units
$71
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N117733
Assorted Milling Index Units.
Includes index types:
- 2x Seco WCMX06T308-85 740 05506 024.
- 11x Iscar WOGX 4-2-GG, WOGX 08T308-GG, 520M P15-P30/K10-K30.
- 1x Iscar CCMX 3-2-16, CCMX 09T308-16, IC556.
- 8x Iscar Indexes, type number Unknown as ID label is missing from case.
Condition - Cases show oil and grime from workshop storage. Indexes appear unused but cannot verify.
Mobile Industrial Workshop Bench/Trolley
$71
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T118961
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Includes divided undercarriage shelf.
Not this lot does NOT include items in, on or around unit.
Lot of 8 Collapsible Steel Storge Boxes
$69.51
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U118260
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have been stored outside and have moderate surfaxe rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
12x Assorted Wrenches
$68
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117326
12x Assorted Wrenches.
Includes the following sizes:
- 2x 47-50mm
- 1x 36-41mm
- 2x 30-32mm
- 1x 24-27mm
- 1x 22-24mm
- 1x 46mm
- 1x 38mm
- 1x 32mm
- 1x 27mm
- 1x 27mm box wrench.
Condition varies with each unit.
Lot of 8 Collapsible Steel Storge Boxes
$68
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F118999
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes.
$67
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H118975
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have been stored outside and have moderate surfaxe rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
Lot of 8 Collapsible Steel Storge Boxes
$66
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref U118988
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have been stored outside and have moderate surfaxe rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
Lot of 8 Collapsible Steel Storge Boxes
$64.01
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117701
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin
$63
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117443
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin.
Heavy duty steel frame finished in yellow
140mm diameter heavy Duty Castors.
Trolley is approx 730mm long, 525mm wide, 460mm tall.
Includes removable pull/push handle.
Black bars added to frame to serve as pins for holding the Included material storage bin.
Storage Bin is approx 630mm long, 550mm wide, 390mm high.
One side panel of bin slides off for dumping contents, etc.
Condition - Both units show moderate workshop wear and use.
Note - See our other listings for group auctions of more bins compatible with this trolley.
4x Assorted Lathe Turning Tools
$63
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L117523
4x Assorted Lathe Turning Tools.
Includes:
- Valenite Loc-a-dfx MTGNR-2525-16 1-0
- Unknown brand SSDCR 2525M12.
- Carboloy MTJNL 2525-22.
- Unknown brand and model, no visible markings, 2525 size.
See photos for further type details.
Lot of 8 Collapsible Steel Storge Boxes
$63
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B118995
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
2x Standard Office Tables w/ 8x Assorted Chairs
$61.25
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J117209
2x Standard Office Tables w/ 8x Assorted Chairs.
Includes:
- 2x tables with green laminate tops and black finished legs, each 1370mm long, 760mm wide, 760mm tall.
- 8x Assorted Chairs, see photos for styles included.
Items show wear and use from workshop lunch room.
Mobile Industrial Workshop Bench/Trolley
$60.50
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K118952
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Not this lot does NOT include items in, on or around unit.
Kerric Soteco Heavy Duty Workshop Shopvac Vacuum, motor fault
$59.09
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117416
Kerrick Soteco Heavy Duty Workshop Shopvac Vacuum, motor fault
Type No. WDL3
Europa 423.
2600W max.
Tank capacity unknown, measures approx 400x400x550mm.
Note - Hose and attachments are missing so therefore NOT included.
Note - Interior motor filter is missing, see photos. Vacuum has not been tested as we do not want to risk damaging the motor without a filter.
Condition - Unit shows heavy industrial Workshop wear and use. Fault in one internal motor, will need servicing.
Dayton Press Punches and Accessories
$59
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C118372
24 assorted punches
7 x HBP62-300
2 x HBP75-300
4 x appear to have been ground down to 4mm tips
2 x 1-1222 85-1
BLC50x23/4x.315
BLO50x23/4x.39x748
BLc50x23/4x.472
2 x DPA13 2162 P 13.000 XL.50.00
Assorted bags of bolts
Assorted Small Part Kits (Washers, Screws and Springs)
$58
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C117124
Assorted Small Part Kits (Washers, Screws and Springs).
1 x Automotive Products Kit of various sized Drain Plug Washers.
1 x Automotive Products Kit of various sized Carburettor Fibre Washers.
1 x Automotive Products Kit of various sized Self Tapping Screws.
1 x Automotive Products Kit of various sized Compression Springs.
Please see photos for specified sizes and basic idea of qtys.
Lot of 8 Collapsible Steel Storge Boxes
$58
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X118991
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
1x Socket Wrench & 1x Breaker Bar w/ 3/4" Inch Socket Size
$57.50
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117329
1x Socket Wrench & 1x Breaker Bar w/ 3/4" Inch Socket Size.
Includes:
- Hero branded socket Wrench with 3/4" socket head, wrench length approx 500mm.
- Unbranded Breaker bar with 3/4" socket head, bar length approx 450mm.
Includes attached sockets in Imperial Sizes 1 1/8" and 1 5/16".
Condition - Breaker bar has a slight bend. All items shows wear and usage.
14x Sandvik Coromant CoroKey Mill Indexes WCMX 08 04 12 R-53
$57
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117397
14x Sandvik Coromant CoroKey Mill Indexes WCMX 08 04 12 R-53.
Includes 6x indexes of subtype 3040 and 6x Indexes of 1020 and 2x Indexes of 235.
Condition - All three cases are partials with unused Indexes within. Cases show Workshop Storage wear.
Assorted Small Part Kits (Circlips, Speed Nuts Woodruff Keys and Springs)
$56
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref D117125
Assorted Small Part Kits (Circlips, Speed Nuts Woodruff Keys and Springs).
1 x Automotive Products Kit of assorted Springs.
1 x Automotive Products Kit of various sized Woodruff Keys.
1 x Visipack VP4 Kit of various sized Anderton Circlips Type 1400 External.
1 x Gee Jay Motor Products Kit of various sized Spure Speed Nuts.
Please see photos for specified sizes and basic idea of qtys.
Lot of 8 Collapsible Steel Storge Boxes
$56
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref C118996
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Industrial Height Adjustable Material Roller
$56
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref X117717
Industrial Height Adjustable Material Roller.
Heavy duty industrial steel.1q
Roller height adjustable from: 460mm to 715mm.
Roller Feed Dimensions: 350mm.
Please note that the roller is seized.
Industrial Storage Bin and Stand
$54.10
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Y118966
Industrial Storage Bin and Stand.
Black steel storage bin:
Outer Dimensions: 610mm x 610mm x 410mm.
Inner Dimensions: 560mm x 550mm x 390mm.
Red steel stand.
Dimensions: 600mm x 600mm x 380mm.
This lot does NOT include any items in, on or around these units.
3x 30mm Ratcheting Box Wrenches by Kastar
$54
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117337
3x 30mm Ratcheting Box Wrenches by Kastar.
Made in USA.
All are Model No. RBM-30
All are 30mm inner box diameter.
315mm total tool length each.
All show typical workshop wear and usage.
Samsung Timesaver 1000W Microwave Oven
$54
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref H117363
Samsung Timesaver 1000W Microwave Oven.
Model No. MW-123H.
315mm diameter glass rotating tray.
Condition - Exterior scratches and use marks. Interior would benefit from a moderate clean.
2x Matching Office Book Shelf Units
$52.50
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117360
2x Matching Office Book Shelf Units.
Grey laminate over MDF.
4x adjustable shelves on each unit.
Each unit is approx 910x280x2020mm.
Note - Items seen on shelves are NOT Included.
Condition - Some laminate chips, scratches etc.
3 x ISCAR Cutting Insert Tool Full Sets
$52
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref N118981
3 x ISCAR Cutting Insert Tool Full Sets.
1 x 10 Piece ISCAR HM90 ADKT 150540-PDR.
1 x 10 Piece ISCAR HM90 APKT 1003PDR IC808.
1 x 10 Piece ISCAE ONMU 050505-TN-MM IC808.
See photos for full details.
Assorted Workshop Consumables
$51
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref B117175
Assortment of Workshop Consumables.
20+ individual items including but not limited to:
9 x Rapid Tap cutting fluid, k80 lock fast resin, eporez egs resin, milacron rz20, eporez egs hardener, copper sulfate, k80 hardener etc.
Note a lot of these are used (not full/new).
Cannot Ship due to dangerous goods.
Telmann Bar Fridge Refrigerator
$51
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117361
Telmann Bar Fridge Refrigerator.
Model No. TR-150.
Unknown inner capacity.
Condition - Has been used as a workshop lunch room fridge. Is operating normally. Would benefit from a moderate clean. Some yellowed interior and exterior plastic.
4x Assorted Steel Mill Parallels
$50
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117366
4x Assorted Steel Mill Parallels.
Unknown manufacturers.
Includes the following:
- 1x unit stamped 005 and is approx 235x14x55mm.
- 1x unit stamped V2 and is approx 380x18x17mm.
- 1x unit stamped G3 and is approx 164x24x23mm.
- 1x unit stamped K2 and is approx 181x30x27mm.
Condition - varies with each unit. Some show drill nicks and holes.
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin & Lifting Unit
$49
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117444
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin & Lifting Unit.
Heavy duty steel frame finished in yellow
140mm diameter heavy Duty Castors.
Trolley is approx 550mm long, 620mm wide, 410mm tall.
Side bars extend above frame to serve as pins for holding the Included material storage bin.
Storage Bin is approx 630mm long, 550mm wide, 390mm high.
One side panel of bin slides off for dumping contents, etc.
Auction also includes custom built lifting apparatus for lifting these bins with a chain hoist etc.
Condition - All units show moderate workshop wear and use.
Note - See our other listings for group auctions of more bins compatible with this trolley and lifter.
Lot of Piston Rod Sealed Gas Springs
$49
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref T118285
Lot of Piston Rod Sealed Gas Springs.
37 Individual Pieces.
Brands including Kaller, Fibro other generic brands.
Various sizes include: 112, 202, powerline x1000, x350 etc.
Please see photos for more details.
Custom Built Workshop Storage Bin Fork Jack
$47.50
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117438
Custom Built Workshop Storage Bin Fork Jack.
Custom built in-house for moving small steel material storage bins.
Forks are approx 565mm long and 50mm wide.
Spacing between forks is approx 340mm.
Lifting height from approx 40mn when lowered to approx 80-120mm (angled) when raised.
Gap between side wheels franes is approx 730mm.
Note - last image showing a small bin being lifted is just for reference only, bin is NOT included.
See our other listings for group auctions of compatible steel bins.
Assorted Lot of Metal Milling Indexes
$47
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117808
Assorted Lot of Metal Milling Indexes.
Includes:
- 5x Kennametal KCPK30.
- 10x Iscar ADKT 150516 R-HM IC328.
- 6x Iscar TRI 16RK-5.25-0.15 IC908.
- 9x Iscar XOMT 060204-HQ IC328.
- 7x Iscar H400 RNHU 1205-AX IC808.
- 2x Iscar H400 RNHU 1205-AX IC830.
- 4x Sandvik Coromant 880-02 02 W05H-P-LM, 4044
- 4x Sandvik Coromant 880-02 02 04H-C-LM, 1044
- 1x Sandvik Coromant 880-05 03 W08H-P-LM, 4044.
- 1x Sandvik Coromant 880-05 03 05H-C-LM, 1044.
- One Iscar case with 7x assorted sizes of small indexes.
Condition - Varies with each unit. Most appear to be unused, a few sern to show some use. All cases show Workshop Storage wear.
24x Assorted Hand Tools, Wrenches, Screwdrivers, Pliers & More
$45
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G117336
24x Assorted Hand Tools.
Includes assorted Wrenches, Screwdrivers, Pliers, tin snips, socket Wrenches with 1/2" drive socket.
See photos for further details on included items.
Condition varies with each item.
6x PB Swiss Made Hex Key Wrenches, Metric Sizes
$43
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E117334
6x PB Swiss Made Hex Key Wrenches, Metric Sizes.
Made in Switzerland by PB
Chrome Vanadium.
Includes the following sizes:
- 22mm
- 19mm
- 17mm
- 2x 10mm
- 8mm.
Condition varies with each unit.
Sandvik Coromant Steel Tool Holder Blank 391.50-95 50 150
$42
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref K117730
Sandvik Coromant Steel Tool Holder Blank.
Type number 391.50-95 50 150.
Also Includes an unmarked tool Holder adapter that measures 61mn dismeter and 97.5mm long. See photos for further details on the two items Included.
Heavy Workshop Material Support Roller Stand
$42
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref S117348
Heavy Workshop Material Support Roller Stand.
550mm wide, 60mm diameter roller.
Adjustable roller height, currently at 1065mm.
Heavy steel I-beam base.
Condition - Appears to have been stored outside for some time. Moderate rusting to areas. Roller does roll but not smoothly.
Small Workshop Trolly
$41
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q118958
Small Workshop Trolly.
Steel frame construction.
Sitting on 4 x 100mm castors.
Has a riser frame in the middle assumed to be for holding bins as picture.
Please note this lot does NOT include the bin photographed.
L-Shaped Corner Office Desk w/ Mobile Drawer Unit
$41
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117352
L-Shaped Corner Office Desk w/ Mobile Drawer Unit.
Light grey laminated MDF desk 1750x1220x715mm.
Black laminated MDF mobile drawer unit 490x450x670mm.
Note - All other items seen on, under and next to the desk and mobile are NOT Included.
Condition - Some surface scratching and use marks.
Mobile Industrial Workshop Bench/Trolley
$41
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref E118972
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Condition - This unit has been stored outside and as such has moderate surface rust and the quality of the castors cannot be guaranteed.
Note this lot does NOT include items in, on or around unit.
Sandvik Coromant Micro Adjustable Lathe Boring Head 148A-41-0601
$33
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Z117589
Sandvik Coromant Micro Adjustable Lathe Boring Head.
Part No. 148A-41-0601.
Includes Allen key and original case.
Appears to be an older but never used head.
5x Assorted Lathe Boring Bars
$30
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref W117586
5x Assorted Lathe Boring Bars.
Unknown manufacturers.
Diameter and length of each bar is:
- 50x325mm.
- 45x235mm.
- 30x335mm.
- 26x187mm.
- 26x235mm.
Comdition varies with each unit, see photos.
7x Assorted Size Precision Engineering Diameter Spacers
$29.22
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref I117364
7x Assorted Size Precision Engineering Diameter Spacers.
Four units by Contitech, two units labeled S.G. Prittie.
Includes the following sizes:
- 24.0-24.20mm
- 20.70-20.90mm
- 14.82-15.18mm and 15.22-15.58mm
- 17.82-18.18mm and 19.02-19.38mm
- 12.05-12.10mm
- 8.32-8.68mm
- 8.55-8.60mm
Condition varies with each unit.
Mobile Wooden Standing Cabinet/Podium
$29
Sold 02/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref J118925
Mobile Wooden Standing Cabinet/Podium.
Wooden material podium like cabinet.
Perfect for reviewing/storing paper documents in an industrial environment where one is often needing to stand.
Includes under cabinet storage space and top storage space under lid.
Sitting on 100mm caster wheels.
This lot does NOT include items in on or around unit.
2 Drive Pin Punch Sets (Incomplete)
$27
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref P117163
2 Drive Pin Punch Sets (Incomplete).
1 set ranging from 3/64" to 1/2". 14 out of 28 pieces.
1 Set ranging from 1mm to 13mm. 19 out of 32 pieces.
Unknown brands.
Please see photos for sizes.
4x Steel Mill Parallels
$25.22
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref Q117476
4x Steel Mill Parallels.
Unknown manufacturer.
All stamped with "G3".
Two units are 82mm long, other two are 80mm long. All are 24mm wide, 22mm high.
Condition - Some nicks from drill bits on units, see photos.
Wooden Standing Cabinet/Podium
$17.50
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref L118953
Wooden Standing Cabinet/Podium
Wooden material podium like cabinet.
Perfect for reviewing/storing paper documents and or any other functions in an industrial environment where one is often needing to stand.
Includes under cabinet storage space and top storage space under lid.
Condition - obvious wear and marking from general usage in a workshop environment.
Does NOT include items in, on, or around unit.
Custom Built Workshop Storage Bin Fork Jack
$10.50
Sold 04/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref F117439
Custom Built Workshop Storage Bin Fork Jack.
Custom built in-house for moving small steel material storage bins.
Forks are approx 565mm long and 50mm wide.
Spacing between forks is approx 340mm.
Lifting height from approx 40mn when lowered to approx 80-120mm (angled) when raised.
Gap between side wheels franes is approx 730mm.
Note - last image showing a small bin being lifted is just for reference only, bin is NOT included.
See our other listings for group auctions of compatible steel bins.
Stackable Industrial Storage Bin
$1.50
Sold 03/08/2020
- SKYLARC’S DUNEDIN ENGINEERING CLOSURE
Skylarc Ref G118974
Stackable Industrial Storage Bin.
Steel frame construction.
Unit has a door
Internal dimensions: 800mm x 800mm x 340mm.
Condition - Has been stored outside so has moderate surface rust - see photos.
Note this lot does not include items in, on or around this unit.
